staging: csr: remove sdioemb/

Nothing in the subdirectory is being used, so remove it, and the sdio_emb.c file which also isn't being built. Cc: Mikko Virkkilä <mikko.virkkila@bluegiga.com> Cc: Lauri Hintsala <Lauri.Hintsala@bluegiga.com> Cc: Riku Mettälä <riku.mettala@bluegiga.com> Cc: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
author: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2012-07-20 11:21:41 -0700
committer: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2012-07-20 11:21:41 -0700
commit: 22c45f0b3502ddd48637b4b2f65036fbe0868622 (patch)
tree: 5d0820b73eb5acfe8626288da2cf2ce56cd1c7c8 /drivers/staging/csr
parent: db03f1d2cb5f99dd8bd33d68c28f67b43c67545a (diff)
download: linux-22c45f0b3502ddd48637b4b2f65036fbe0868622.tar.bz2
23 files changed, 0 insertions, 4016 deletions
diff --git a/drivers/staging/csr/sdio_emb.c b/drivers/staging/csr/sdio_emb.c
deleted file mode 100644
index b6a7d6f513b0..000000000000
--- a/drivers/staging/csr/sdio_emb.c
+++ /dev/null
@@ -1,891 +0,0 @@
-/*
- * ---------------------------------------------------------------------------
- *
- * FILE: sdio_emb.c
- *
- * PURPOSE: Driver instantiation and deletion for SDIO on Linux.
- *
- *      This file brings together the SDIO bus interface, the UniFi
- *      driver core and the Linux net_device stack.
- *
- * Copyright (C) 2007-2009 by Cambridge Silicon Radio Ltd.
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- *
- * ---------------------------------------------------------------------------
- */
-#include <linux/kmod.h>
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include "csr_wifi_hip_unifi.h"
-#include "unifi_priv.h"
-
-#include "sdioemb/sdio_api.h"
-
-/* The function driver context, i.e the UniFi Driver */
-static CsrSdioFunctionDriver *sdio_func_drv;
-
-#ifdef CONFIG_PM
-static int uf_sdio_emb_power_event(struct notifier_block *this, unsigned long event, void *ptr);
-#endif
-
-/* The Android wakelock is here for completeness. Typically the MMC driver is used
- * instead of sdioemb, but sdioemb may be used for CSPI.
- */
-#ifdef ANDROID_BUILD
-struct wake_lock unifi_sdio_wake_lock; /* wakelock to prevent suspend while resuming */
-#endif
-
-/* sdioemb driver uses POSIX error codes */
-static CsrResult
-ConvertSdioToCsrSdioResult(int r)
-{
-    CsrResult csrResult = CSR_RESULT_FAILURE;
-
-    switch (r) {
-        case 0:
-            csrResult = CSR_RESULT_SUCCESS;
-            break;
-        case -EIO:
-            csrResult = CSR_SDIO_RESULT_CRC_ERROR;
-            break;
-            /* Timeout errors */
-        case -ETIMEDOUT:
-        case -EBUSY:
-            csrResult = CSR_SDIO_RESULT_TIMEOUT;
-            break;
-        case -ENODEV:
-        case -ENOMEDIUM:
-            csrResult = CSR_SDIO_RESULT_NO_DEVICE;
-            break;
-        case -EINVAL:
-            csrResult = CSR_SDIO_RESULT_INVALID_VALUE;
-            break;
-        case -ENOMEM:
-        case -ENOSYS:
-        case -EILSEQ:
-        case -ERANGE:
-        case -ENXIO:
-            csrResult = CSR_RESULT_FAILURE;
-            break;
-        default:
-            unifi_warning(NULL, "Unrecognised SDIO error code: %d\n", r);
-            break;
-    }
-
-    return csrResult;
-}
-
-
-CsrResult
-CsrSdioRead8(CsrSdioFunction *function, CsrUint32 address, CsrUint8 *data)
-{
-    struct sdioemb_dev *fdev = (struct sdioemb_dev *)function->priv;
-    int err;
-    err = sdioemb_read8(fdev, address, data);
-    if (err) {
-        return ConvertSdioToCsrSdioResult(err);
-    }
-    return CSR_RESULT_SUCCESS;
-} /* CsrSdioRead8() */
-
-CsrResult
-CsrSdioWrite8(CsrSdioFunction *function, CsrUint32 address, CsrUint8 data)
-{
-    struct sdioemb_dev *fdev = (struct sdioemb_dev *)function->priv;
-    int err;
-    err = sdioemb_write8(fdev, address, data);
-    if (err) {
-        return ConvertSdioToCsrSdioResult(err);
-    }
-    return CSR_RESULT_SUCCESS;
-} /* CsrSdioWrite8() */
-
-CsrResult
-CsrSdioRead16(CsrSdioFunction *function, CsrUint32 address, CsrUint16 *data)
-{
-    struct sdioemb_dev *fdev = (struct sdioemb_dev *)function->priv;
-    int r;
-
-    r = sdioemb_read16(fdev, address, data);
-    if (r) {
-        return ConvertSdioToCsrSdioResult(r);
-    }
-
-    return CSR_RESULT_SUCCESS;
-} /* CsrSdioRead16() */
-
-CsrResult
-CsrSdioWrite16(CsrSdioFunction *function, CsrUint32 address, CsrUint16 data)
-{
-    struct sdioemb_dev *fdev = (struct sdioemb_dev *)function->priv;
-    int r;
-
-    r = sdioemb_write16(fdev, address, data);
-    if (r) {
-        return ConvertSdioToCsrSdioResult(r);
-    }
-
-    return CSR_RESULT_SUCCESS;
-} /* CsrSdioWrite16() */
-
-
-CsrResult
-CsrSdioF0Read8(CsrSdioFunction *function, CsrUint32 address, CsrUint8 *data)
-{
-    struct sdioemb_dev *fdev = (struct sdioemb_dev *)function->priv;
-    int err;
-    err = sdioemb_f0_read8(fdev, address, data);
-    if (err) {
-        return ConvertSdioToCsrSdioResult(err);
-    }
-    return CSR_RESULT_SUCCESS;
-} /* CsrSdioF0Read8() */
-
-
-CsrResult
-CsrSdioF0Write8(CsrSdioFunction *function, CsrUint32 address, CsrUint8 data)
-{
-    struct sdioemb_dev *fdev = (struct sdioemb_dev *)function->priv;
-    int err;
-    err = sdioemb_f0_write8(fdev, address, data);
-    if (err) {
-        return ConvertSdioToCsrSdioResult(err);
-    }
-    return CSR_RESULT_SUCCESS;
-} /* CsrSdioF0Write8() */
-
-CsrResult
-CsrSdioRead(CsrSdioFunction *function, CsrUint32 address, void *data, CsrUint32 length)
-{
-    struct sdioemb_dev *fdev = (struct sdioemb_dev *)function->priv;
-    int err;
-    err = sdioemb_read(fdev, address, data, length);
-    if (err) {
-        return ConvertSdioToCsrSdioResult(err);
-    }
-    return CSR_RESULT_SUCCESS;
-} /* CsrSdioRead() */
-
-CsrResult
-CsrSdioWrite(CsrSdioFunction *function, CsrUint32 address, const void *data, CsrUint32 length)
-{
-    struct sdioemb_dev *fdev = (struct sdioemb_dev *)function->priv;
-    int err;
-    err = sdioemb_write(fdev, address, data, length);
-    if (err) {
-        return ConvertSdioToCsrSdioResult(err);
-    }
-    return CSR_RESULT_SUCCESS;
-} /* CsrSdioWrite() */
-
-
-CsrResult
-CsrSdioBlockSizeSet(CsrSdioFunction *function, CsrUint16 blockSize)
-{
-    struct sdioemb_dev *fdev = (struct sdioemb_dev *)function->priv;
-    int r = 0;
-
-    /* Module parameter overrides */
-    if (sdio_block_size > -1) {
-        blockSize = sdio_block_size;
-    }
-
-    unifi_trace(NULL, UDBG1, "Set SDIO function block size to %d\n",
-            blockSize);
-
-    r = sdioemb_set_block_size(fdev, blockSize);
-    if (r) {
-        unifi_error(NULL, "Error %d setting block size\n", r);
-    }
-
-    /* Determine the achieved block size to report to the core */
-    function->blockSize = fdev->blocksize;
-
-    return ConvertSdioToCsrSdioResult(r);
-} /* CsrSdioBlockSizeSet() */
-
-
-/*
- * ---------------------------------------------------------------------------
- *  CsrSdioMaxBusClockFrequencySet
- *
- *      Set the maximum SDIO bus clock speed to use.
- *
- *  Arguments:
- *      sdio            SDIO context pointer
- *      maxFrequency         maximum clock speed in Hz
- *
- *  Returns:
- *      an error code.
- * ---------------------------------------------------------------------------
- */
-CsrResult
-CsrSdioMaxBusClockFrequencySet(CsrSdioFunction *function, CsrUint32 maxFrequency)
-{
-    struct sdioemb_dev *fdev = (struct sdioemb_dev *)function->priv;
-    CsrUint32 max_khz = maxFrequency/1000;
-
-    if (!max_khz || max_khz > sdio_clock) {
-        max_khz = sdio_clock;
-    }
-    unifi_trace(NULL, UDBG1, "Setting SDIO bus clock to %d kHz\n", max_khz);
-    sdioemb_set_max_bus_freq(fdev, 1000 * max_khz);
-
-    return CSR_RESULT_SUCCESS;
-} /* CsrSdioMaxBusClockFrequencySet() */
-
-
-/*
- * ---------------------------------------------------------------------------
- *  CsrSdioInterruptEnable
- *  CsrSdioInterruptDisable
- *
- *      Enable or disable the SDIO interrupt.
- *
- *  Arguments:
- *      sdio            SDIO context pointer
- *
- *  Returns:
- *      Zero on success or a UniFi driver error code.
- * ---------------------------------------------------------------------------
- */
-CsrResult
-CsrSdioInterruptEnable(CsrSdioFunction *function)
-{
-    struct sdioemb_dev *fdev = (struct sdioemb_dev *)function->priv;
-    int r;
-
-    r = sdioemb_interrupt_enable(fdev);
-    if (r) {
-        return ConvertSdioToCsrSdioResult(r);
-    }
-
-    return CSR_RESULT_SUCCESS;
-} /* CsrSdioInterruptEnable() */
-
-CsrResult
-CsrSdioInterruptDisable(CsrSdioFunction *function)
-{
-    struct sdioemb_dev *fdev = (struct sdioemb_dev *)function->priv;
-    int r;
-
-    r = sdioemb_interrupt_disable(fdev);
-    if (r) {
-        return ConvertSdioToCsrSdioResult(r);
-    }
-
-    return CSR_RESULT_SUCCESS;
-} /* CsrSdioInterruptDisable() */
-
-
-/*
- * ---------------------------------------------------------------------------
- *  CsrSdioInterruptAcknowledge
- *
- *      Acknowledge an SDIO interrupt.
- *
- *  Arguments:
- *      sdio            SDIO context pointer
- *
- *  Returns:
- *      Zero on success or a UniFi driver error code.
- * ---------------------------------------------------------------------------
- */
-void CsrSdioInterruptAcknowledge(CsrSdioFunction *function)
-{
-    struct sdioemb_dev *fdev = (struct sdioemb_dev *)function->priv;
-
-    sdioemb_interrupt_acknowledge(fdev);
-} /* CsrSdioInterruptAcknowledge() */
-
-
-/*
- * ---------------------------------------------------------------------------
- *  CsrSdioFunctionEnable
- *
- *      Enable i/o on this function.
- *
- *  Arguments:
- *      sdio            SDIO context pointer
- *
- * Returns:
- *      UniFi driver error code.
- * ---------------------------------------------------------------------------
- */
-CsrResult
-CsrSdioFunctionEnable(CsrSdioFunction *function)
-{
-    struct sdioemb_dev *fdev = (struct sdioemb_dev *)function->priv;
-    int r;
-
-    /* Enable UniFi function (the 802.11 part). */
-    r = sdioemb_enable_function(fdev);
-    if (r) {
-        unifi_error(NULL, "Failed to enable SDIO function %d\n", fdev->function);
-        return ConvertSdioToCsrSdioResult(r);
-    }
-    return CSR_RESULT_SUCCESS;
-} /* CsrSdioFunctionEnable() */
-
-
-/*
- * ---------------------------------------------------------------------------
- *  CsrSdioFunctionDisable
- *
- *      Disable i/o on this function.
- *
- *  Arguments:
- *      sdio            SDIO context pointer
- *
- * Returns:
- *      UniFi driver error code.
- * ---------------------------------------------------------------------------
- */
-CsrResult
-CsrSdioFunctionDisable(CsrSdioFunction *function)
-{
-    struct sdioemb_dev *fdev = (struct sdioemb_dev *)function->priv;
-    int r;
-
-    /* Disable UniFi function (the 802.11 part). */
-    r = sdioemb_disable_function(fdev);
-    if (r) {
-        unifi_error(NULL, "Failed to disable SDIO function %d\n", fdev->function);
-        return ConvertSdioToCsrSdioResult(r);
-    }
-    return CSR_RESULT_SUCCESS;
-} /* CsrSdioFunctionDisable() */
-
-
-/*
- * ---------------------------------------------------------------------------
- *  CsrSdioFunctionActive
- *
- *      No-op as the bus goes to an active state at the start of every
- *      command.
- *
- *  Arguments:
- *      sdio            SDIO context pointer
- * ---------------------------------------------------------------------------
- */
-void
-CsrSdioFunctionActive(CsrSdioFunction *function)
-{
-} /* CsrSdioFunctionActive() */
-
-/*
- * ---------------------------------------------------------------------------
- *  CsrSdioFunctionIdle
- *
- *      Set the function as idle.
- *
- *  Arguments:
- *      sdio            SDIO context pointer
- * ---------------------------------------------------------------------------
- */
-void
-CsrSdioFunctionIdle(CsrSdioFunction *function)
-{
-    struct sdioemb_dev *fdev = (struct sdioemb_dev *)function->priv;
-
-    sdioemb_idle_function(fdev);
-} /* CsrSdioFunctionIdle() */
-
-
-CsrResult
-CsrSdioPowerOn(CsrSdioFunction *function)
-{
-    struct sdioemb_dev *fdev = (struct sdioemb_dev *)function->priv;
-
-    if (disable_power_control != 1) {
-        sdioemb_power_on(fdev);
-    }
-
-    return CSR_RESULT_SUCCESS;
-} /* CsrSdioPowerOn() */
-
-void
-CsrSdioPowerOff(CsrSdioFunction *function)
-{
-    struct sdioemb_dev *fdev = (struct sdioemb_dev *)function->priv;
-    if (disable_power_control != 1) {
-        sdioemb_power_off(fdev);
-    }
-} /* CsrSdioPowerOff() */
-
-
-/*
- * ---------------------------------------------------------------------------
- *  CsrSdioHardReset
- *
- *      Hard Resets UniFi is possible.
- *
- *  Arguments:
- *      sdio            SDIO context pointer
- *
- * Returns:
- *      1       if the SDIO driver is not capable of doing a hard reset.
- *      0       if a hard reset was successfully performed.
- *      -CSR_EIO if an I/O error occured while re-initializing the card.
- *              This is a fatal, non-recoverable error.
- *      -CSR_ENODEV if the card is no longer present.
- * ---------------------------------------------------------------------------
- */
-CsrResult
-CsrSdioHardReset(CsrSdioFunction *function)
-{
-    struct sdioemb_dev *fdev = (struct sdioemb_dev *)function->priv;
-    int r;
-
-    /* Hard reset can be disabled by a module parameter */
-    r = 1;
-    if (disable_hw_reset != 1) {
-        r = sdioemb_hard_reset(fdev); /* may return 1 if can't reset */
-        if (r < 0) {
-            return ConvertSdioToCsrSdioResult(r);   /* fatal error */
-        }
-    }
-
-    /* Set the SDIO bus width after a hard reset */
-    if (buswidth == 1) {
-        unifi_info(NULL, "Setting SDIO bus width to 1\n");
-        sdioemb_set_bus_width(fdev, buswidth);
-    } else if (buswidth == 4) {
-        unifi_info(NULL, "Setting SDIO bus width to 4\n");
-        sdioemb_set_bus_width(fdev, buswidth);
-    }
-
-    if(r == 1)
-    {
-        return CSR_SDIO_RESULT_NOT_RESET;
-    }
-
-    return ConvertSdioToCsrSdioResult(r);
-
-} /* CsrSdioHardReset() */
-
-
-int csr_sdio_linux_remove_irq(CsrSdioFunction *function)
-{
-    struct sdioemb_dev *fdev = (struct sdioemb_dev *)function->priv;
-
-    return sdioemb_interrupt_disable(fdev);
-}
-
-int csr_sdio_linux_install_irq(CsrSdioFunction *function)
-{
-    struct sdioemb_dev *fdev = (struct sdioemb_dev *)function->priv;
-
-    return sdioemb_interrupt_enable(fdev);
-}
-
-
-/*
- * ---------------------------------------------------------------------------
- *  uf_glue_sdio_int_handler
- *      Card interrupt callback.
- *
- * Arguments:
- *      fdev            SDIO context pointer
- *
- * Returns:
- *      None.
- * ---------------------------------------------------------------------------
- */
-static void
-uf_glue_sdio_int_handler(struct sdioemb_dev *fdev)
-{
-    CsrSdioFunction *sdio_ctx = fdev->drv_data;
-    CsrSdioInterruptDsrCallback func_dsr_callback;
-
-    /* If the function driver has registered a handler, call it */
-    if (sdio_func_drv && sdio_func_drv->intr) {
-        /* The function driver may return a DSR. */
-        func_dsr_callback = sdio_func_drv->intr(sdio_ctx);
-        /* If it did return a DSR handle, call it */
-        if (func_dsr_callback) {
-            func_dsr_callback(sdio_ctx);
-        }
-    }
-}
-
-#ifdef CONFIG_PM
-
-/*
- * Power Management notifier
- */
-struct uf_sdio_emb_pm_notifier
-{
-    struct list_head list;
-
-    CsrSdioFunction *sdio_ctx;
-    struct notifier_block pm_notifier;
-};
-
-/* PM notifier list head */
-static struct uf_sdio_emb_pm_notifier uf_sdio_emb_pm_notifiers = {
-    .sdio_ctx = NULL,
-};
-
-/*
- * ---------------------------------------------------------------------------
- * uf_sdio_emb_register_pm_notifier
- * uf_sdio_emb_unregister_pm_notifier
- *
- *      Register/unregister for power management events. A list is used to
- *	allow multiple card instances to be supported.
- *
- *  Arguments:
- *      sdio_ctx - CSR SDIO context to associate PM notifier to
- *
- *  Returns:
- *      Register function returns NULL on error
- * ---------------------------------------------------------------------------
- */
-static struct uf_sdio_emb_pm_notifier *
-uf_sdio_emb_register_pm_notifier(CsrSdioFunction *sdio_ctx)
-{
-    /* Allocate notifier context for this card instance */
-    struct uf_sdio_emb_pm_notifier *notifier_ctx = kmalloc(sizeof(struct uf_sdio_emb_pm_notifier), GFP_KERNEL);
-
-    if (notifier_ctx)
-    {
-        notifier_ctx->sdio_ctx = sdio_ctx;
-        notifier_ctx->pm_notifier.notifier_call = uf_sdio_emb_power_event;
-
-        list_add(&notifier_ctx->list, &uf_sdio_emb_pm_notifiers.list);
-
-        if (register_pm_notifier(&notifier_ctx->pm_notifier)) {
-            printk(KERN_ERR "unifi: register_pm_notifier failed\n");
-        }
-    }
-
-    return notifier_ctx;
-}
-
-static void
-uf_sdio_emb_unregister_pm_notifier(CsrSdioFunction *sdio_ctx)
-{
-    struct uf_sdio_emb_pm_notifier *notifier_ctx;
-    struct list_head *node, *q;
-
-    list_for_each_safe(node, q, &uf_sdio_emb_pm_notifiers.list) {
-        notifier_ctx = list_entry(node, struct uf_sdio_emb_pm_notifier, list);
-
-        /* If it matches, unregister and free the notifier context */
-        if (notifier_ctx && notifier_ctx->sdio_ctx == sdio_ctx)
-        {
-            if (unregister_pm_notifier(&notifier_ctx->pm_notifier)) {
-                printk(KERN_ERR "unifi: unregister_pm_notifier failed\n");
-            }
-
-            /* Remove from list */
-            notifier_ctx->sdio_ctx = NULL;
-            list_del(node);
-            kfree(notifier_ctx);
-        }
-    }
-}
-
-/*
- * ---------------------------------------------------------------------------
- * uf_sdio_emb_power_event
- *
- *      Handler for power management events.
- *
- *      We need to handle suspend/resume events while the userspace is unsuspended
- *      to allow the SME to run its suspend/resume state machines.
- *
- *  Arguments:
- *      event   event ID
- *
- *  Returns:
- *      Status of the event handling
- * ---------------------------------------------------------------------------
- */
-static int
-uf_sdio_emb_power_event(struct notifier_block *this, unsigned long event, void *ptr)
-{
-    struct uf_sdio_emb_pm_notifier *notifier_ctx = container_of(this,
-                                                                struct uf_sdio_emb_pm_notifier,
-                                                                pm_notifier);
-
-    /* Call the CSR SDIO function driver's suspend/resume method
-     * while the userspace is unsuspended.
-     */
-    switch (event) {
-        case PM_POST_HIBERNATION:
-        case PM_POST_SUSPEND:
-            printk(KERN_INFO "%s:%d resume\n", __FUNCTION__, __LINE__ );
-            if (sdio_func_drv && sdio_func_drv->resume) {
-                sdio_func_drv->resume(notifier_ctx->sdio_ctx);
-            }
-            break;
-
-        case PM_HIBERNATION_PREPARE:
-        case PM_SUSPEND_PREPARE:
-            printk(KERN_INFO "%s:%d suspend\n", __FUNCTION__, __LINE__ );
-            if (sdio_func_drv && sdio_func_drv->suspend) {
-                sdio_func_drv->suspend(notifier_ctx->sdio_ctx);
-            }
-            break;
-    }
-    return NOTIFY_DONE;
-}
-
-#endif /* CONFIG_PM */
-
-/*
- * ---------------------------------------------------------------------------
- *  uf_glue_sdio_probe
- *
- *      Card insert callback.
- *
- * Arguments:
- *      fdev            SDIO context pointer
- *
- * Returns:
- *      UniFi driver error code.
- * ---------------------------------------------------------------------------
- */
-static int
-uf_glue_sdio_probe(struct sdioemb_dev *fdev)
-{
-    CsrSdioFunction *sdio_ctx;
-
-    unifi_info(NULL, "UniFi card inserted\n");
-
-    /* Allocate context and private in one lump */
-    sdio_ctx = (CsrSdioFunction *)kmalloc(sizeof(CsrSdioFunction),
-                                          GFP_KERNEL);
-    if (sdio_ctx == NULL) {
-        return -ENOMEM;
-    }
-
-
-    sdio_ctx->sdioId.manfId = fdev->vendor_id;
-    sdio_ctx->sdioId.cardId = fdev->device_id;
-    sdio_ctx->sdioId.sdioFunction = fdev->function;
-    sdio_ctx->sdioId.sdioInterface = 0;
-    sdio_ctx->blockSize = fdev->blocksize;
-    sdio_ctx->priv = (void *)fdev;
-    sdio_ctx->features = 0;
-
-    /* Module parameter enables byte mode */
-    if (sdio_byte_mode) {
-        sdio_ctx->features |= CSR_SDIO_FEATURE_BYTE_MODE;
-    }
-
-    /* Set up pointer to func_priv in middle of lump */
-    fdev->drv_data = sdio_ctx;
-
-    /* Always override default SDIO bus clock */
-    unifi_trace(NULL, UDBG1, "Setting SDIO bus clock to %d kHz\n", sdio_clock);
-    sdioemb_set_max_bus_freq(fdev, 1000 * sdio_clock);
-
-#ifdef CONFIG_PM
-    /* Register to get PM events */
-    if (uf_sdio_emb_register_pm_notifier(sdio_ctx) == NULL) {
-        unifi_error(NULL, "%s: Failed to register for PM events\n", __FUNCTION__);
-    }
-#endif
-
-    /* Call the main UniFi driver inserted handler */
-    if (sdio_func_drv && sdio_func_drv->inserted) {
-        uf_add_os_device(fdev->slot_id, fdev->os_device);
-        sdio_func_drv->inserted(sdio_ctx);
-    }
-
-#ifdef ANDROID_BUILD
-    /* Take the wakelock */
-    unifi_trace(NULL, UDBG1, "emb probe: take wake lock\n");
-    wake_lock(&unifi_sdio_wake_lock);
-#endif
-
-    return 0;
-} /* uf_glue_sdio_probe() */
-
-
-
-/*
- * ---------------------------------------------------------------------------
- *  uf_sdio_remove
- *
- *      Card removal callback.
- *
- * Arguments:
- *      fdev            SDIO device
- *
- * Returns:
- *      UniFi driver error code.
- * ---------------------------------------------------------------------------
- */
-static void
-uf_sdio_remove(struct sdioemb_dev *fdev)
-{
-    CsrSdioFunction *sdio_ctx = fdev->drv_data;
-
-    unifi_info(NULL, "UniFi card removed\n");
-
-    /* Clean up the SDIO function driver */
-    if (sdio_func_drv && sdio_func_drv->removed) {
-        sdio_func_drv->removed(sdio_ctx);
-    }
-
-#ifdef CONFIG_PM
-    /* Unregister for PM events */
-    uf_sdio_emb_unregister_pm_notifier(sdio_ctx);
-#endif
-
-    kfree(sdio_ctx);
-
-} /* uf_sdio_remove */
-
-
-/*
- * ---------------------------------------------------------------------------
- *  uf_glue_sdio_suspend
- *
- *      System suspend callback.
- *
- * Arguments:
- *      fdev            SDIO device
- *
- * Returns:
- *
- * ---------------------------------------------------------------------------
- */
-static void
-uf_glue_sdio_suspend(struct sdioemb_dev *fdev)
-{
-    unifi_info(NULL, "Suspending...\n");
-
-} /* uf_glue_sdio_suspend() */
-
-
-/*
- * ---------------------------------------------------------------------------
- *  uf_glue_sdio_resume
- *
- *      System resume callback.
- *
- * Arguments:
- *      fdev            SDIO device
- *
- * Returns:
- *
- * ---------------------------------------------------------------------------
- */
-static void
-uf_glue_sdio_resume(struct sdioemb_dev *fdev)
-{
-    unifi_info(NULL, "Resuming...\n");
-
-#ifdef ANDROID_BUILD
-    unifi_trace(NULL, UDBG1, "emb resume: take wakelock\n");
-    wake_lock(&unifi_sdio_wake_lock);
-#endif
-
-} /* uf_glue_sdio_resume() */
-
-
-
-
-static struct sdioemb_func_driver unifi_sdioemb = {
-    .name = "unifi",
-    .id_table = NULL,           /* Filled in when main driver registers */
-
-    .probe  = uf_glue_sdio_probe,
-    .remove = uf_sdio_remove,
-    .card_int_handler = uf_glue_sdio_int_handler,
-    .suspend  = uf_glue_sdio_suspend,
-    .resume = uf_glue_sdio_resume,
-};
-
-
-/*
- * ---------------------------------------------------------------------------
- *  CsrSdioFunctionDriverRegister
- *  CsrSdioFunctionDriverUnregister
- *
- *      These functions are called from the main module load and unload
- *      functions. They perform the appropriate operations for the
- *      SDIOemb driver.
- *
- *  Arguments:
- *      None.
- *
- *  Returns:
- *      None.
- * ---------------------------------------------------------------------------
- */
-CsrResult
-CsrSdioFunctionDriverRegister(CsrSdioFunctionDriver *sdio_drv)
-{
-    int r;
-    int i;
-
-    printk("Unifi: Using CSR embedded SDIO driver\n");
-
-    if (sdio_func_drv) {
-        unifi_error(NULL, "sdio_emb: UniFi driver already registered\n");
-        return CSR_SDIO_RESULT_INVALID_VALUE;
-    }
-
-    /* Build ID table to pass to sdioemb */
-    unifi_sdioemb.id_table = CsrPmemAlloc(sizeof(struct sdioemb_id_table) * (sdio_drv->idsCount + 1));
-    if (unifi_sdioemb.id_table == NULL) {
-        unifi_error(NULL, "sdio_emb: Failed to allocate memory for ID table (%d IDs)\n", sdio_drv->idsCount);
-        return CSR_RESULT_FAILURE;
-    }
-    for (i = 0; i < sdio_drv->idsCount; i++) {
-        unifi_sdioemb.id_table[i].vendor_id = sdio_drv->ids[i].manfId;
-        unifi_sdioemb.id_table[i].device_id = sdio_drv->ids[i].cardId;
-        unifi_sdioemb.id_table[i].function  = sdio_drv->ids[i].sdioFunction;
-        unifi_sdioemb.id_table[i].interface = sdio_drv->ids[i].sdioInterface;
-    }
-    unifi_sdioemb.id_table[i].vendor_id = 0;
-    unifi_sdioemb.id_table[i].device_id = 0;
-    unifi_sdioemb.id_table[i].function  = 0;
-    unifi_sdioemb.id_table[i].interface = 0;
-
-    /* Save the registered driver description */
-    sdio_func_drv = sdio_drv;
-
-#ifdef CONFIG_PM
-    /* Initialise PM notifier list */
-    INIT_LIST_HEAD(&uf_sdio_emb_pm_notifiers.list);
-#endif
-
-#ifdef ANDROID_BUILD
-    wake_lock_init(&unifi_sdio_wake_lock, WAKE_LOCK_SUSPEND, "unifi_sdio_work");
-#endif
-
-    /* Register ourself with sdioemb */
-    r = sdioemb_driver_register(&unifi_sdioemb);
-    if (r) {
-        unifi_error(NULL, "Failed to register UniFi SDIO driver: %d\n", r);
-        return ConvertSdioToCsrSdioResult(r);
-    }
-
-    return CSR_RESULT_SUCCESS;
-} /* CsrSdioFunctionDriverRegister() */
-
-
-void
-CsrSdioFunctionDriverUnregister(CsrSdioFunctionDriver *sdio_drv)
-{
-    sdioemb_driver_unregister(&unifi_sdioemb);
-
-#ifdef ANDROID_BUILD
-    wake_lock_destroy(&unifi_sdio_wake_lock);
-#endif
-
-    sdio_func_drv = NULL;
-
-    CsrPmemFree(unifi_sdioemb.id_table);
-    unifi_sdioemb.id_table = NULL;
-} /* CsrSdioFunctionDriverUnregister() */
-
diff --git a/drivers/staging/csr/sdioemb/cspi.h b/drivers/staging/csr/sdioemb/cspi.h
deleted file mode 100644
index b0a2886970ab..000000000000
--- a/drivers/staging/csr/sdioemb/cspi.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * CSPI definitions.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- */
-#ifndef SDIOEMB_CSPI_H
-#define SDIOEMB_CSPI_H
-
-/**
- * @addtogroup sdriver
- *@{*/
-
-#define CSPI_FUNC(f) (f)
-#define CSPI_READ    0x10
-#define CSPI_WRITE   0x20
-#define CSPI_BURST   0x40
-#define CSPI_TYPE_MASK 0x70
-
-/**
- * CSPI_MODE function 0 register.
- *
- * Various CSPI mode settings.
- *
- * @see CSPI specification (CS-110124-SP)
- */
-#define CSPI_MODE 0xf7
-#  define CSPI_MODE_PADDED_WRITE_HDRS      (1 << 7)
-#  define CSPI_MODE_PADDED_READ_HDRS       (1 << 6)
-/**
- * BigEndianRegisters bit of \ref CSPI_MODE -- enable big-endian CSPI
- * register reads and writes.
- *
- * @warning This bit should never be set as it's not possible to use
- * this mode without knowledge of which registers are 8 bit and which
- * are 16 bit.
- */
-#  define CSPI_MODE_BE_REG                 (1 << 5)
-#  define CSPI_MODE_BE_BURST               (1 << 4)
-#  define CSPI_MODE_INT_ACTIVE_HIGH        (1 << 3)
-#  define CSPI_MODE_INT_ON_ERR             (1 << 2)
-#  define CSPI_MODE_LEN_FIELD_PRESENT      (1 << 1)
-#  define CSPI_MODE_DRV_MISO_ON_RISING_CLK (1 << 0)
-
-#define CSPI_STATUS 0xf8
-
-#define CSPI_PADDING 0xf9
-#  define CSPI_PADDING_REG(p)   ((p) << 0)
-#  define CSPI_PADDING_BURST(p) ((p) << 4)
-
-#define CSPI_PADDING_MAX       15
-#define CSPI_PADDING_REG_DFLT   0
-#define CSPI_PADDING_BURST_DFLT 2
-
-/* cmd byte, 3 byte addr, padding, error byte, data word */
-#define CSPI_REG_TRANSFER_LEN (1 + 3 + CSPI_PADDING_MAX + 1 + 2)
-
-/*@}*/
-
-#endif /* #ifndef SDIOEMB_CSPI_H */
diff --git a/drivers/staging/csr/sdioemb/csr_result.h b/drivers/staging/csr/sdioemb/csr_result.h
deleted file mode 100644
index 9813f3f86ee6..000000000000
--- a/drivers/staging/csr/sdioemb/csr_result.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Synergy compatible API -- common result codes.
- *
- * Copyright (C) 2010 Cambridge Silicon Radio Ltd.
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- */
-#ifndef CSR_RESULT_H__
-#define CSR_RESULT_H__
-
-typedef CsrUint16 CsrResult;
-#define CSR_RESULT_SUCCESS ((CsrResult) 0x0000)
-#define CSR_RESULT_FAILURE ((CsrResult) 0xffff)
-
-#endif
diff --git a/drivers/staging/csr/sdioemb/csr_sdio.h b/drivers/staging/csr/sdioemb/csr_sdio.h
deleted file mode 100644
index 5d05d96d3958..000000000000
--- a/drivers/staging/csr/sdioemb/csr_sdio.h
+++ /dev/null
@@ -1,711 +0,0 @@
-/*
- * Synergy compatible API -- SDIO.
- *
- * Copyright (C) 2010 Cambridge Silicon Radio Ltd.
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- */
-#ifndef CSR_SDIO_H__
-#define CSR_SDIO_H__
-
-#include "csr_types.h"
-#include "csr_result.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Result Codes */
-#define CSR_SDIO_RESULT_INVALID_VALUE   ((CsrResult) 1) /* Invalid argument value */
-#define CSR_SDIO_RESULT_NO_DEVICE       ((CsrResult) 2) /* The specified device is no longer present */
-#define CSR_SDIO_RESULT_CRC_ERROR       ((CsrResult) 3) /* The transmitted/received data or command response contained a CRC error */
-#define CSR_SDIO_RESULT_TIMEOUT         ((CsrResult) 4) /* No command response or data received from device, or function enable/disable did not succeed within timeout period */
-#define CSR_SDIO_RESULT_NOT_RESET       ((CsrResult) 5) /* The device was not reset */
-
-/* Features (for use in features member of CsrSdioFunction) */
-#define CSR_SDIO_FEATURE_BYTE_MODE                   0x00000001 /* Transfer sizes do not have to be a multiple of block size */
-#define CSR_SDIO_FEATURE_DMA_CAPABLE_MEM_REQUIRED    0x00000002 /* Bulk operations require DMA friendly memory */
-
-/* CsrSdioFunctionId wildcards (for use in CsrSdioFunctionId members) */
-#define CSR_SDIO_ANY_MANF_ID        0xFFFF
-#define CSR_SDIO_ANY_CARD_ID        0xFFFF
-#define CSR_SDIO_ANY_SDIO_FUNCTION  0xFF
-#define CSR_SDIO_ANY_SDIO_INTERFACE 0xFF
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioFunctionId
- *
- *  DESCRIPTION
- *      This structure describes one or more functions of a device, based on
- *      four qualitative measures. The CsrSdioFunctionId wildcard defines can be
- *      used for making the CsrSdioFunctionId match more than one function.
- *
- *  MEMBERS
- *      manfId - Vendor ID (or CSR_SDIO_ANY_MANF_ID).
- *      cardId - Device ID (or CSR_SDIO_ANY_CARD_ID).
- *      sdioFunction - SDIO Function number (or CSR_SDIO_ANY_SDIO_FUNCTION).
- *      sdioInterface - SDIO Standard Interface Code (or CSR_SDIO_ANY_SDIO_INTERFACE)
- *
- *----------------------------------------------------------------------------*/
-typedef struct
-{
-    CsrUint16 manfId;       /* Vendor ID to match or CSR_SDIO_ANY_MANF_ID */
-    CsrUint16 cardId;       /* Device ID to match or CSR_SDIO_ANY_CARD_ID */
-    CsrUint8 sdioFunction;  /* SDIO Function number to match or CSR_SDIO_ANY_SDIO_FUNCTION */
-    CsrUint8 sdioInterface; /* SDIO Standard Interface Code to match or CSR_SDIO_ANY_SDIO_INTERFACE */
-} CsrSdioFunctionId;
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioFunction
- *
- *  DESCRIPTION
- *      This structure represents a single function on a device.
- *
- *  MEMBERS
- *      sdioId - A CsrSdioFunctionId describing this particular function. The
- *               subfield shall not contain any CsrSdioFunctionId wildcards. The
- *               subfields shall describe the specific single function
- *               represented by this structure.
- *      blockSize - Actual configured block size, or 0 if unconfigured.
- *      features - Bit mask with any of CSR_SDIO_FEATURE_* set.
- *      driverData - For use by the Function Driver. The SDIO Driver shall not
- *                   attempt to dereference the pointer.
- *      priv - For use by the SDIO Driver. The Function Driver shall not attempt
- *             to dereference the pointer.
- *
- *----------------------------------------------------------------------------*/
-typedef struct
-{
-    CsrSdioFunctionId sdioId;
-    CsrUint16 blockSize;    /* Actual configured block size, or 0 if unconfigured */
-    CsrUint32 features;     /* Bit mask with any of CSR_SDIO_FEATURE_* set */
-    void *cardHandle;       /* An opaque handle for this function's card. */
-    void *osDevice;
-    void *driverData;       /* For use by the Function Driver */
-    void *priv;             /* For use by the SDIO Driver */
-} CsrSdioFunction;
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioInsertedCallback, CsrSdioRemovedCallback
- *
- *  DESCRIPTION
- *      CsrSdioInsertedCallback is called when a function becomes available to
- *      a registered Function Driver that supports the function.
- *      CsrSdioRemovedCallback is called when a function is no longer available
- *      to a Function Driver, either because the device has been removed, or the
- *      Function Driver has been unregistered.
- *
- *      NOTE: These functions are implemented by the Function Driver, and are
- *            passed as function pointers in the CsrSdioFunctionDriver struct.
- *
- *  PARAMETERS
- *      function - Pointer to struct representing the function.
- *
- *----------------------------------------------------------------------------*/
-typedef void (*CsrSdioInsertedCallback)(CsrSdioFunction *function);
-typedef void (*CsrSdioRemovedCallback)(CsrSdioFunction *function);
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioInterruptDsrCallback, CsrSdioInterruptCallback
- *
- *  DESCRIPTION
- *      CsrSdioInterruptCallback is called when an interrupt occurs on the
- *      the device associated with the specified function.
- *
- *      NOTE: These functions are implemented by the Function Driver, and are
- *            passed as function pointers in the CsrSdioFunctionDriver struct.
- *
- *  PARAMETERS
- *      function - Pointer to struct representing the function.
- *
- *  RETURNS (only CsrSdioInterruptCallback)
- *      A pointer to a CsrSdioInterruptDsrCallback function.
- *
- *----------------------------------------------------------------------------*/
-typedef void (*CsrSdioInterruptDsrCallback)(CsrSdioFunction *function);
-typedef CsrSdioInterruptDsrCallback (*CsrSdioInterruptCallback)(CsrSdioFunction *function);
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioSuspendCallback, CsrSdioResumeCallback
- *
- *  DESCRIPTION
- *      CsrSdioSuspendCallback is called when the system is preparing to go
- *      into a suspended state. CsrSdioResumeCallback is called when the system
- *      has entered an active state again.
- *
- *      NOTE: These functions are implemented by the Function Driver, and are
- *            passed as function pointers in the CsrSdioFunctionDriver struct.
- *
- *  PARAMETERS
- *      function - Pointer to struct representing the function.
- *
- *----------------------------------------------------------------------------*/
-typedef void (*CsrSdioSuspendCallback)(CsrSdioFunction *function);
-typedef void (*CsrSdioResumeCallback)(CsrSdioFunction *function);
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioAsyncCallback, CsrSdioAsyncDsrCallback
- *
- *  DESCRIPTION
- *      CsrSdioAsyncCallback is called when an asynchronous operation completes.
- *
- *      NOTE: These functions are implemented by the Function Driver, and are
- *            passed as function pointers in the function calls that initiate
- *            the operation.
- *
- *  PARAMETERS
- *      function - Pointer to struct representing the function.
- *      result - The result of the operation that completed. See the description
- *               of the initiating function for possible result values.
- *
- *  RETURNS (only CsrSdioAsyncCallback)
- *      A pointer to a CsrSdioAsyncDsrCallback function.
- *
- *----------------------------------------------------------------------------*/
-typedef void (*CsrSdioAsyncDsrCallback)(CsrSdioFunction *function, CsrResult result);
-typedef CsrSdioAsyncDsrCallback (*CsrSdioAsyncCallback)(CsrSdioFunction *function, CsrResult result);
-
-typedef struct
-{
-    CsrSdioInsertedCallback     inserted;
-    CsrSdioRemovedCallback      removed;
-    CsrSdioInterruptCallback    intr;
-    CsrSdioSuspendCallback      suspend;
-    CsrSdioResumeCallback       resume;
-    CsrSdioFunctionId           *ids;
-    CsrUint8                    idsCount;
-    void                        *priv;
-} CsrSdioFunctionDriver;
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioFunctionDriverRegister
- *
- *  DESCRIPTION
- *      Register a Function Driver.
- *
- *  PARAMETERS
- *      functionDriver - Pointer to struct describing the Function Driver.
- *
- *  RETURNS
- *      CSR_RESULT_SUCCESS - The Function Driver was successfully
- *                           registered.
- *      CSR_RESULT_FAILURE - Unable to register the function driver,
- *                                because of an unspecified/unknown error. The
- *                                Function Driver has not been registered.
- *      CSR_SDIO_RESULT_INVALID_VALUE - The specified Function Driver pointer
- *                                      does not point at a valid Function
- *                                      Driver structure, or some of the members
- *                                      contain invalid entries.
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrSdioFunctionDriverRegister(CsrSdioFunctionDriver *functionDriver);
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioFunctionDriverUnregister
- *
- *  DESCRIPTION
- *      Unregister a previously registered Function Driver.
- *
- *  PARAMETERS
- *      functionDriver - pointer to struct describing the Function Driver.
- *
- *----------------------------------------------------------------------------*/
-void CsrSdioFunctionDriverUnregister(CsrSdioFunctionDriver *functionDriver);
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioFunctionEnable, CsrSdioFunctionDisable
- *
- *  DESCRIPTION
- *      Enable/disable the specified function by setting/clearing the
- *      corresponding bit in the I/O Enable register in function 0, and then
- *      periodically reading the related bit in the I/O Ready register until it
- *      is set/clear, limited by an implementation defined timeout.
- *
- *  PARAMETERS
- *      function - Pointer to struct representing the function.
- *
- *  RETURNS
- *      CSR_RESULT_SUCCESS - The specified function was enabled/disabled.
- *      CSR_RESULT_FAILURE - Unspecified/unknown error.
- *      CSR_SDIO_RESULT_NO_DEVICE - The device does not exist anymore.
- *      CSR_SDIO_RESULT_CRC_ERROR - A CRC error occured. The state of the
- *                                  related bit in the I/O Enable register is
- *                                  undefined.
- *      CSR_SDIO_RESULT_TIMEOUT - No response from the device, or the related
- *                                bit in the I/O ready register was not
- *                                set/cleared within the timeout period.
- *
- *      NOTE: If the SDIO R5 response is available, and either of the
- *            FUNCTION_NUMBER or OUT_OF_RANGE bits are set,
- *            CSR_SDIO_RESULT_INVALID_VALUE shall be returned. If the ERROR bit
- *            is set (but none of FUNCTION_NUMBER or OUT_OF_RANGE),
- *            CSR_RESULT_FAILURE shall be returned. The ILLEGAL_COMMAND and
- *            COM_CRC_ERROR bits shall be ignored.
- *
- *            If the CSPI response is available, and any of the
- *            FUNCTION_DISABLED or CLOCK_DISABLED bits are set,
- *            CSR_SDIO_RESULT_INVALID_VALUE will be returned.
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrSdioFunctionEnable(CsrSdioFunction *function);
-CsrResult CsrSdioFunctionDisable(CsrSdioFunction *function);
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioInterruptEnable, CsrSdioInterruptDisable
- *
- *  DESCRIPTION
- *      Enable/disable the interrupt for the specified function by
- *      setting/clearing the corresponding bit in the INT Enable register in
- *      function 0.
- *
- *  PARAMETERS
- *      function - Pointer to struct representing the function.
- *
- *  RETURNS
- *      CSR_RESULT_SUCCESS - The specified function was enabled/disabled.
- *      CSR_RESULT_FAILURE - Unspecified/unknown error.
- *      CSR_SDIO_RESULT_NO_DEVICE - The device does not exist anymore.
- *      CSR_SDIO_RESULT_CRC_ERROR - A CRC error occured. The state of the
- *                                  related bit in the INT Enable register is
- *                                  unchanged.
- *      CSR_SDIO_RESULT_INVALID_VALUE - The specified function cannot be
- *                                      enabled/disabled, because it either
- *                                      does not exist or it is not possible to
- *                                      individually enable/disable functions.
- *      CSR_SDIO_RESULT_TIMEOUT - No response from the device.
- *
- *      NOTE: If the SDIO R5 response is available, and either of the
- *            FUNCTION_NUMBER or OUT_OF_RANGE bits are set,
- *            CSR_SDIO_RESULT_INVALID_VALUE shall be returned. If the ERROR bit
- *            is set (but none of FUNCTION_NUMBER or OUT_OF_RANGE),
- *            CSR_RESULT_FAILURE shall be returned. The ILLEGAL_COMMAND and
- *            COM_CRC_ERROR bits shall be ignored.
- *
- *            If the CSPI response is available, and any of the
- *            FUNCTION_DISABLED or CLOCK_DISABLED bits are set,
- *            CSR_SDIO_RESULT_INVALID_VALUE will be returned.
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrSdioInterruptEnable(CsrSdioFunction *function);
-CsrResult CsrSdioInterruptDisable(CsrSdioFunction *function);
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioInterruptAcknowledge
- *
- *  DESCRIPTION
- *      Acknowledge that a signalled interrupt has been handled. Shall only
- *      be called once, and exactly once for each signalled interrupt to the
- *      corresponding function.
- *
- *  PARAMETERS
- *      function - Pointer to struct representing the function to which the
- *                 event was signalled.
- *
- *----------------------------------------------------------------------------*/
-void CsrSdioInterruptAcknowledge(CsrSdioFunction *function);
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioInsertedAcknowledge, CsrSdioRemovedAcknowledge
- *
- *  DESCRIPTION
- *      Acknowledge that a signalled inserted/removed event has been handled.
- *      Shall only be called once, and exactly once for each signalled event to
- *      the corresponding function.
- *
- *  PARAMETERS
- *      function - Pointer to struct representing the function to which the
- *                 inserted was signalled.
- *      result (CsrSdioInsertedAcknowledge only)
- *          CSR_RESULT_SUCCESS - The Function Driver has accepted the
- *                                    function, and the function is attached to
- *                                    the Function Driver until the
- *                                    CsrSdioRemovedCallback is called and
- *                                    acknowledged.
- *          CSR_RESULT_FAILURE - Unable to accept the function. The
- *                                    function is not attached to the Function
- *                                    Driver, and it may be passed to another
- *                                    Function Driver which supports the
- *                                    function.
- *
- *----------------------------------------------------------------------------*/
-void CsrSdioInsertedAcknowledge(CsrSdioFunction *function, CsrResult result);
-void CsrSdioRemovedAcknowledge(CsrSdioFunction *function);
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioSuspendAcknowledge, CsrSdioResumeAcknowledge
- *
- *  DESCRIPTION
- *      Acknowledge that a signalled suspend event has been handled. Shall only
- *      be called once, and exactly once for each signalled event to the
- *      corresponding function.
- *
- *  PARAMETERS
- *      function - Pointer to struct representing the function to which the
- *                 event was signalled.
- *      result
- *          CSR_RESULT_SUCCESS - Successfully suspended/resumed.
- *          CSR_RESULT_FAILURE - Unspecified/unknown error.
- *
- *----------------------------------------------------------------------------*/
-void CsrSdioSuspendAcknowledge(CsrSdioFunction *function, CsrResult result);
-void CsrSdioResumeAcknowledge(CsrSdioFunction *function, CsrResult result);
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioBlockSizeSet
- *
- *  DESCRIPTION
- *      Set the block size to use for the function. The actual configured block
- *      size shall be the minimum of:
- *          1) Maximum block size supported by the function.
- *          2) Maximum block size supported by the host controller.
- *          3) The block size specified by the blockSize argument.
- *
- *      When this function returns, the actual configured block size is
- *      available in the blockSize member of the function struct.
- *
- *  PARAMETERS
- *      function - Pointer to struct representing the function.
- *      blockSize - Block size to use for the function. Valid range is 1 to
- *                  2048.
- *
- *  RETURNS
- *      CSR_RESULT_SUCCESS - The block size register on the chip
- *                                was updated.
- *      CSR_RESULT_FAILURE - Unspecified/unknown error.
- *      CSR_SDIO_RESULT_INVALID_VALUE - One or more arguments were invalid.
- *      CSR_SDIO_RESULT_NO_DEVICE - The device does not exist anymore.
- *      CSR_SDIO_RESULT_CRC_ERROR - A CRC error occured. The configured block
- *                                  size is undefined.
- *      CSR_SDIO_RESULT_TIMEOUT - No response from the device.
- *
- *      NOTE: If the SDIO R5 response is available, and the FUNCTION_NUMBER
- *            bits is set, CSR_SDIO_RESULT_INVALID_VALUE shall be returned.
- *            If the ERROR bit is set (but not FUNCTION_NUMBER),
- *            CSR_RESULT_FAILURE shall be returned. The ILLEGAL_COMMAND and
- *            COM_CRC_ERROR bits shall be ignored.
- *
- *            If the CSPI response is available, and any of the
- *            FUNCTION_DISABLED or CLOCK_DISABLED bits are set,
- *            CSR_SDIO_RESULT_INVALID_VALUE will be returned.
- *
- *      NOTE: Setting the block size requires two individual operations. The
- *            implementation shall ignore the OUT_OF_RANGE bit of the SDIO R5
- *            response for the first operation, as the partially configured
- *            block size may be out of range, even if the final block size
- *            (after the second operation) is in the valid range.
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrSdioBlockSizeSet(CsrSdioFunction *function, CsrUint16 blockSize);
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioMaxBusClockFrequencySet
- *
- *  DESCRIPTION
- *      Set the maximum clock frequency to use for the device associated with
- *      the specified function. The actual configured clock frequency for the
- *      device shall be the minimum of:
- *          1) Maximum clock frequency supported by the device.
- *          2) Maximum clock frequency supported by the host controller.
- *          3) Maximum clock frequency specified for any function on the same
- *             device.
- *
- *      If the clock frequency exceeds 25MHz, it is the responsibility of the
- *      SDIO driver to enable high speed mode on the device, using the standard
- *      defined procedure, before increasing the frequency beyond the limit.
- *
- *      Note that the clock frequency configured affects all functions on the
- *      same device.
- *
- *  PARAMETERS
- *      function - Pointer to struct representing the function.
- *      maxFrequency - The maximum clock frequency for the function in Hertz.
- *
- *  RETURNS
- *      CSR_RESULT_SUCCESS - The maximum clock frequency was succesfully
- *                                set for the function.
- *      CSR_RESULT_FAILURE - Unspecified/unknown error.
- *      CSR_SDIO_RESULT_INVALID_VALUE - One or more arguments were invalid.
- *      CSR_SDIO_RESULT_NO_DEVICE - The device does not exist anymore.
- *
- *      NOTE: If the SDIO R5 response is available, and the FUNCTION_NUMBER
- *            bits is set, CSR_SDIO_RESULT_INVALID_VALUE shall be returned.
- *            If the ERROR bit is set (but not FUNCTION_NUMBER),
- *            CSR_RESULT_FAILURE shall be returned. The ILLEGAL_COMMAND and
- *            COM_CRC_ERROR bits shall be ignored.
- *
- *            If the CSPI response is available, and any of the
- *            FUNCTION_DISABLED or CLOCK_DISABLED bits are set,
- *            CSR_SDIO_RESULT_INVALID_VALUE will be returned.
- *
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrSdioMaxBusClockFrequencySet(CsrSdioFunction *function, CsrUint32 maxFrequency);
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioRead8, CsrSdioWrite8, CsrSdioRead8Async, CsrSdioWrite8Async
- *
- *  DESCRIPTION
- *      Read/write an 8bit value from/to the specified register address.
- *
- *  PARAMETERS
- *      function - Pointer to struct representing the function.
- *      address - Register address within the function.
- *      data - The data to read/write.
- *      callback - The function to call on operation completion.
- *
- *  RETURNS
- *      CSR_RESULT_SUCCESS - The data was successfully read/written.
- *      CSR_RESULT_FAILURE - Unspecified/unknown error.
- *      CSR_SDIO_RESULT_INVALID_VALUE - One or more arguments were invalid.
- *      CSR_SDIO_RESULT_NO_DEVICE - The device does not exist anymore.
- *      CSR_SDIO_RESULT_CRC_ERROR - A CRC error occured. No data read/written.
- *      CSR_SDIO_RESULT_TIMEOUT - No response from the device.
- *
- *      NOTE: If the SDIO R5 response is available, and either of the
- *            FUNCTION_NUMBER or OUT_OF_RANGE bits are set,
- *            CSR_SDIO_RESULT_INVALID_VALUE shall be returned. If the ERROR bit
- *            is set (but none of FUNCTION_NUMBER or OUT_OF_RANGE),
- *            CSR_RESULT_FAILURE shall be returned. The ILLEGAL_COMMAND and
- *            COM_CRC_ERROR bits shall be ignored.
- *
- *            If the CSPI response is available, and any of the
- *            FUNCTION_DISABLED or CLOCK_DISABLED bits are set,
- *            CSR_SDIO_RESULT_INVALID_VALUE will be returned.
- *
- *      NOTE: The CsrSdioRead8Async and CsrSdioWrite8Async functions return
- *            immediately, and the supplied callback function is called when the
- *            operation is complete. The result value is given as an argument to
- *            the callback function.
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrSdioRead8(CsrSdioFunction *function, CsrUint32 address, CsrUint8 *data);
-CsrResult CsrSdioWrite8(CsrSdioFunction *function, CsrUint32 address, CsrUint8 data);
-void CsrSdioRead8Async(CsrSdioFunction *function, CsrUint32 address, CsrUint8 *data, CsrSdioAsyncCallback callback);
-void CsrSdioWrite8Async(CsrSdioFunction *function, CsrUint32 address, CsrUint8 data, CsrSdioAsyncCallback callback);
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioRead16, CsrSdioWrite16, CsrSdioRead16Async, CsrSdioWrite16Async
- *
- *  DESCRIPTION
- *      Read/write a 16bit value from/to the specified register address.
- *
- *  PARAMETERS
- *      function - Pointer to struct representing the function.
- *      address - Register address within the function.
- *      data - The data to read/write.
- *      callback - The function to call on operation completion.
- *
- *  RETURNS
- *      CSR_RESULT_SUCCESS - The data was successfully read/written.
- *      CSR_RESULT_FAILURE - Unspecified/unknown error.
- *      CSR_SDIO_RESULT_INVALID_VALUE - One or more arguments were invalid.
- *      CSR_SDIO_RESULT_NO_DEVICE - The device does not exist anymore.
- *      CSR_SDIO_RESULT_CRC_ERROR - A CRC error occured. Data may have been
- *                                  partially read/written.
- *      CSR_SDIO_RESULT_TIMEOUT - No response from the device.
- *
- *      NOTE: If the SDIO R5 response is available, and either of the
- *            FUNCTION_NUMBER or OUT_OF_RANGE bits are set,
- *            CSR_SDIO_RESULT_INVALID_VALUE shall be returned. If the ERROR bit
- *            is set (but none of FUNCTION_NUMBER or OUT_OF_RANGE),
- *            CSR_RESULT_FAILURE shall be returned. The ILLEGAL_COMMAND and
- *            COM_CRC_ERROR bits shall be ignored.
- *
- *            If the CSPI response is available, and any of the
- *            FUNCTION_DISABLED or CLOCK_DISABLED bits are set,
- *            CSR_SDIO_RESULT_INVALID_VALUE will be returned.
- *
- *      NOTE: The CsrSdioRead16Async and CsrSdioWrite16Async functions return
- *            immediately, and the supplied callback function is called when the
- *            operation is complete. The result value is given as an argument to
- *            the callback function.
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrSdioRead16(CsrSdioFunction *function, CsrUint32 address, CsrUint16 *data);
-CsrResult CsrSdioWrite16(CsrSdioFunction *function, CsrUint32 address, CsrUint16 data);
-void CsrSdioRead16Async(CsrSdioFunction *function, CsrUint32 address, CsrUint16 *data, CsrSdioAsyncCallback callback);
-void CsrSdioWrite16Async(CsrSdioFunction *function, CsrUint32 address, CsrUint16 data, CsrSdioAsyncCallback callback);
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioF0Read8, CsrSdioF0Write8, CsrSdioF0Read8Async,
- *      CsrSdioF0Write8Async
- *
- *  DESCRIPTION
- *      Read/write an 8bit value from/to the specified register address in
- *      function 0.
- *
- *  PARAMETERS
- *      function - Pointer to struct representing the function.
- *      address - Register address within the function.
- *      data - The data to read/write.
- *      callback - The function to call on operation completion.
- *
- *  RETURNS
- *      CSR_RESULT_SUCCESS - The data was successfully read/written.
- *      CSR_RESULT_FAILURE - Unspecified/unknown error.
- *      CSR_SDIO_RESULT_INVALID_VALUE - One or more arguments were invalid.
- *      CSR_SDIO_RESULT_NO_DEVICE - The device does not exist anymore.
- *      CSR_SDIO_RESULT_CRC_ERROR - A CRC error occured. No data read/written.
- *      CSR_SDIO_RESULT_TIMEOUT - No response from the device.
- *
- *      NOTE: If the SDIO R5 response is available, and either of the
- *            FUNCTION_NUMBER or OUT_OF_RANGE bits are set,
- *            CSR_SDIO_RESULT_INVALID_VALUE shall be returned. If the ERROR bit
- *            is set (but none of FUNCTION_NUMBER or OUT_OF_RANGE),
- *            CSR_RESULT_FAILURE shall be returned. The ILLEGAL_COMMAND and
- *            COM_CRC_ERROR bits shall be ignored.
- *
- *            If the CSPI response is available, and any of the
- *            FUNCTION_DISABLED or CLOCK_DISABLED bits are set,
- *            CSR_SDIO_RESULT_INVALID_VALUE will be returned.
- *
- *      NOTE: The CsrSdioF0Read8Async and CsrSdioF0Write8Async functions return
- *            immediately, and the supplied callback function is called when the
- *            operation is complete. The result value is given as an argument to
- *            the callback function.
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrSdioF0Read8(CsrSdioFunction *function, CsrUint32 address, CsrUint8 *data);
-CsrResult CsrSdioF0Write8(CsrSdioFunction *function, CsrUint32 address, CsrUint8 data);
-void CsrSdioF0Read8Async(CsrSdioFunction *function, CsrUint32 address, CsrUint8 *data, CsrSdioAsyncCallback callback);
-void CsrSdioF0Write8Async(CsrSdioFunction *function, CsrUint32 address, CsrUint8 data, CsrSdioAsyncCallback callback);
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioRead, CsrSdioWrite, CsrSdioReadAsync, CsrSdioWriteAsync
- *
- *  DESCRIPTION
- *      Read/write a specified number of bytes from/to the specified register
- *      address.
- *
- *  PARAMETERS
- *      function - Pointer to struct representing the function.
- *      address - Register address within the function.
- *      data - The data to read/write.
- *      length - Number of byte to read/write.
- *      callback - The function to call on operation completion.
- *
- *  RETURNS
- *      CSR_RESULT_SUCCESS - The data was successfully read/written.
- *      CSR_RESULT_FAILURE - Unspecified/unknown error.
- *      CSR_SDIO_RESULT_INVALID_VALUE - One or more arguments were invalid.
- *      CSR_SDIO_RESULT_NO_DEVICE - The device does not exist anymore.
- *      CSR_SDIO_RESULT_CRC_ERROR - A CRC error occured. Data may have been
- *                                  partially read/written.
- *      CSR_SDIO_RESULT_TIMEOUT - No response from the device.
- *
- *      NOTE: If the SDIO R5 response is available, and either of the
- *            FUNCTION_NUMBER or OUT_OF_RANGE bits are set,
- *            CSR_SDIO_RESULT_INVALID_VALUE shall be returned. If the ERROR bit
- *            is set (but none of FUNCTION_NUMBER or OUT_OF_RANGE),
- *            CSR_RESULT_FAILURE shall be returned. The ILLEGAL_COMMAND and
- *            COM_CRC_ERROR bits shall be ignored.
- *
- *            If the CSPI response is available, and any of the
- *            FUNCTION_DISABLED or CLOCK_DISABLED bits are set,
- *            CSR_SDIO_RESULT_INVALID_VALUE will be returned.
- *
- *      NOTE: The CsrSdioF0Read8Async and CsrSdioF0Write8Async functions return
- *            immediately, and the supplied callback function is called when the
- *            operation is complete. The result value is given as an argument to
- *            the callback function.
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrSdioRead(CsrSdioFunction *function, CsrUint32 address, void *data, CsrUint32 length);
-CsrResult CsrSdioWrite(CsrSdioFunction *function, CsrUint32 address, const void *data, CsrUint32 length);
-void CsrSdioReadAsync(CsrSdioFunction *function, CsrUint32 address, void *data, CsrUint32 length, CsrSdioAsyncCallback callback);
-void CsrSdioWriteAsync(CsrSdioFunction *function, CsrUint32 address, const void *data, CsrUint32 length, CsrSdioAsyncCallback callback);
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioPowerOn, CsrSdioPowerOff
- *
- *  DESCRIPTION
- *      Power on/off the device.
- *
- *  PARAMETERS
- *      function - Pointer to struct representing the function that resides on
- *                 the device to power on/off.
- *
- *  RETURNS (only CsrSdioPowerOn)
- *      CSR_RESULT_SUCCESS - Power was succesfully reapplied and the device
- *                                has been reinitialised.
- *      CSR_RESULT_FAILURE - Unspecified/unknown error.
- *      CSR_SDIO_RESULT_NO_DEVICE - The device does not exist anymore.
- *      CSR_SDIO_RESULT_CRC_ERROR - A CRC error occured during reinitialisation.
- *      CSR_SDIO_RESULT_TIMEOUT - No response from the device during
- *                                reinitialisation.
- *      CSR_SDIO_RESULT_NOT_RESET - The power was not removed by the
- *                                  CsrSdioPowerOff call. The state of the
- *                                  device is unchanged.
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrSdioPowerOn(CsrSdioFunction *function);
-void CsrSdioPowerOff(CsrSdioFunction *function);
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioHardReset
- *
- *  DESCRIPTION
- *      Perform a hardware reset of the device.
- *
- *  PARAMETERS
- *      function - Pointer to struct representing the function that resides on
- *                 the device to hard reset.
- *
- *  RETURNS
- *      CSR_RESULT_SUCCESS - Reset was succesfully performed and the device
- *                                has been reinitialised.
- *      CSR_RESULT_FAILURE - Unspecified/unknown error.
- *      CSR_SDIO_RESULT_NO_DEVICE - The device does not exist anymore.
- *      CSR_SDIO_RESULT_CRC_ERROR - A CRC error occured during reinitialisation.
- *      CSR_SDIO_RESULT_TIMEOUT - No response from the device during
- *                                reinitialisation.
- *      CSR_SDIO_RESULT_NOT_RESET - The reset was not applied because it is not
- *                                  supported. The state of the device is
- *                                  unchanged.
- *
- *----------------------------------------------------------------------------*/
-CsrResult CsrSdioHardReset(CsrSdioFunction *function);
-
-/*----------------------------------------------------------------------------*
- *  NAME
- *      CsrSdioFunctionActive, CsrSdioFunctionIdle
- *
- *  DESCRIPTION
- *
- *  PARAMETERS
- *      function - Pointer to struct representing the function.
- *
- *----------------------------------------------------------------------------*/
-void CsrSdioFunctionActive(CsrSdioFunction *function);
-void CsrSdioFunctionIdle(CsrSdioFunction *function);
-
-void CsrSdioCallbackInhibitEnter(CsrSdioFunction *function);
-void CsrSdioCallbackInhibitLeave(CsrSdioFunction *function);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/drivers/staging/csr/sdioemb/csr_sdio_lib.h b/drivers/staging/csr/sdioemb/csr_sdio_lib.h
deleted file mode 100644
index 15c70f6e716c..000000000000
--- a/drivers/staging/csr/sdioemb/csr_sdio_lib.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Synergy compatible API -- SDIO utility library.
- *
- * Copyright (C) 2010 Cambridge Silicon Radio Ltd.
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- */
-#ifndef CSR_SDIO_LIB_H__
-#define CSR_SDIO_LIB_H__
-
-#include <csr_sdio.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-CsrResult CsrSdioFunctionReenable(CsrSdioFunction *function);
-
-typedef int CsrStatus; /* platform specific */
-#define CSR_STATUS_FAILURE(status) ((status) < 0) /* platform specific */
-
-CsrResult CsrSdioStatusToResult(CsrStatus status);
-CsrStatus CsrSdioResultToStatus(CsrResult result);
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* #ifndef CSR_SDIO_LIB_H__ */
diff --git a/drivers/staging/csr/sdioemb/csr_sdio_wdf.h b/drivers/staging/csr/sdioemb/csr_sdio_wdf.h
deleted file mode 100644
index 6f0d71c47336..000000000000
--- a/drivers/staging/csr/sdioemb/csr_sdio_wdf.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Synergy compatible API -- helpers for Windows Driver Framework drivers.
- *
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- */
-#ifndef CSR_SDIO_WDF_H__
-#define CSR_SDIO_WDF_H__
-
-#include <wdf.h>
-
-NTSTATUS CsrSdioWdfDeviceInit(WDFDEVICE device);
-void CsrSdioWdfDeviceCleanup(WDFDEVICE device);
-
-NTSTATUS CsrSdioWdfDeviceAdd(WDFDEVICE device);
-void CsrSdioWdfDeviceDel(WDFDEVICE device);
-
-NTSTATUS CsrSdioWdfDeviceSuspend(WDFDEVICE device);
-NTSTATUS CsrSdioWdfDeviceResume(WDFDEVICE device);
-
-#endif /* #ifndef CSR_SDIO_WDF_H__ */
diff --git a/drivers/staging/csr/sdioemb/csr_types.h b/drivers/staging/csr/sdioemb/csr_types.h
deleted file mode 100644
index c0d95b33e758..000000000000
--- a/drivers/staging/csr/sdioemb/csr_types.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Synergy compatible API -- basic types.
- *
- * Copyright (C) 2010 Cambridge Silicon Radio Ltd.
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- */
-#ifndef CSR_TYPES_H__
-#define CSR_TYPES_H__
-
-#include <oska/types.h>
-
-#ifndef FALSE
-#define FALSE false
-#endif
-
-#ifndef TRUE
-#define TRUE true
-#endif
-
-/* Data types */
-
-typedef size_t                  CsrSize;
-
-typedef uint8_t                 CsrUint8;
-typedef uint16_t                CsrUint16;
-typedef uint32_t                CsrUint32;
-
-typedef int8_t                  CsrInt8;
-typedef int16_t                 CsrInt16;
-typedef int32_t                 CsrInt32;
-
-typedef bool                    CsrBool;
-
-typedef char                    CsrCharString;
-typedef unsigned char           CsrUtf8String;
-typedef CsrUint16               CsrUtf16String; /* 16-bit UTF16 strings */
-typedef CsrUint32               CsrUint24;
-
-/*
- * 64-bit integers
- *
- * Note: If a given compiler does not support 64-bit types, it is
- * OK to omit these definitions;  32-bit versions of the code using
- * these types may be available.  Consult the relevant documentation
- * or the customer support group for information on this.
- */
-#define CSR_HAVE_64_BIT_INTEGERS
-typedef uint64_t    CsrUint64;
-typedef int64_t     CsrInt64;
-
-#endif
diff --git a/drivers/staging/csr/sdioemb/libsdio.h b/drivers/staging/csr/sdioemb/libsdio.h
deleted file mode 100644
index 29ac4115d60a..000000000000
--- a/drivers/staging/csr/sdioemb/libsdio.h
+++ /dev/null
@@ -1,404 +0,0 @@
-/*
- * SDIO Userspace Interface library.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- */
-#ifndef SDIOEMB_LIBSDIO_H
-#define SDIOEMB_LIBSDIO_H
-
-/**
- * \defgroup libsdio Userspace SDIO library (libsdio)
- *
- * \brief \e libsdio is a Linux C library for accessing SDIO cards.
- *
- * Use of this library requires several \e sdioemb kernel modules to be
- * loaded:
- *   - \c sdio.
- *   - \c An SDIO slot driver (e.g., \c slot_shc for a standard PCI
- *     SDIO Host Controller).
- *   - \c sdio_uif which provides the required character devices
- *     (/dev/sdio_uif0 for the card in SDIO slot 0 etc.).
- */
-/*@{*/
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#ifdef WIN32
-#  define LIBSDIOAPI __stdcall
-#else
-#  define LIBSDIOAPI
-#endif
-
-struct sdio_uif;
-
-/**
- * Handle to an opened SDIO Userspace Interface device.
- */
-typedef struct sdio_uif *sdio_uif_t;
-
-enum sdio_status {
-    SDIO_SUCCESS   = 0,
-    SDIO_EAGAIN    = -1,
-    SDIO_EINVAL    = -2,
-    SDIO_EIO       = -3,
-    SDIO_ENODEV    = -4,
-    SDIO_ENOMEM    = -5,
-    SDIO_ENOTSUPP  = -6,
-    SDIO_ENXIO     = -7,
-    SDIO_ETIMEDOUT = -8,
-};
-
-/**
- * Card interrupt handler function.
- *
- * @param uif handle to the interrupting device.
- * @param arg data supplied by the caller of sdio_open().
- */
-typedef void (LIBSDIOAPI *sdio_int_handler_t)(sdio_uif_t uif, void *arg);
-
-/**
- * Asynchronous IO completion callback function.
- *
- * @param uif    handle to the device that completed the IO operation.
- * @param arg    data supplied by the caller of the asynchronous IO operation.
- * @param status status of the IO operation. 0 is success; -EIO,
- *               -EINVAL, -ETIMEDOUT etc. on an error.
- */
-typedef void (LIBSDIOAPI *sdio_io_callback_t)(sdio_uif_t uif, void *arg, int status);
-
-/**
- * Open a SDIO Userspace Interface device and (optionally) register a
- * card interrupt handler and enable card interrupts.
- *
- * Card interrupts are masked before calling int_handler and are
- * unmasked when int_handler returns (unless sdio_interrupt_mask() is
- * called).
- *
- * @param dev_filename  filename of the device to open.
- * @param int_handler   card interrupt handler; or NULL if no
- *                      interrupt handler is required.
- * @param arg           argument to be passed to the interrupt handler.
- *
- * @return handle to the opened device; or NULL on error with errno
- * set.
- */
-sdio_uif_t LIBSDIOAPI sdio_open(const char *dev_filename,
-                                sdio_int_handler_t int_handler, void *arg);
-
-/**
- * Mask the SDIO interrupt.
- *
- * Call this in an interrupt handler to allow the processing of
- * interrupts to be deferred until after the interrupt handler has
- * returned.
- *
- * @note \e Must only be called from within the interrupt handler
- * registered with sdio_open().
- *
- * @param uif device handle.
- */
-void LIBSDIOAPI sdio_interrupt_mask(sdio_uif_t uif);
-
-/**
- * Unmask the SDIO interrupt.
- *
- * Unmasks the SDIO interrupt if it had previously been masked with
- * sdio_interrupt_mask().
- *
- * @param uif device handle.
- */
-void LIBSDIOAPI sdio_interrupt_unmask(sdio_uif_t uif);
-
-/**
- * Close an opened SDIO Userspace Interface device, freeing all
- * associated resources.
- *
- * @param uif handle to the device.
- */
-void LIBSDIOAPI sdio_close(sdio_uif_t uif);
-
-/**
- * Return the number of functions the card has.
- *
- * @param uif device handle.
- *
- * @return number of card functions.
- */
-int LIBSDIOAPI sdio_num_functions(sdio_uif_t uif);
-
-/**
- * Set an SDIO bus to 1 bit or 4 bit wide mode.
- *
- * The CCCR bus interface control register will be read and rewritten
- * with the new bus width.
- *
- * @param uif       device handle.
- * @param bus_width bus width (1 or 4).
- *
- * @return 0 on success; -ve on error with errno set.
- *
- * @note The card capabilities are \e not checked.  The user should
- * ensure 4 bit mode is not enabled on a card that does not support
- * it.
- */
-int LIBSDIOAPI sdio_set_bus_width(sdio_uif_t uif, int bus_width);
-
-/**
- * Limit the frequency of (or stop) the SD bus clock.
- *
- * The frequency cannot be set greater than that supported by the card
- * or the controller.
- *
- * @note Stopping the bus clock while other device drivers are
- * executing commands may result in those commands not completing
- * until the bus clock is restarted.
- *
- * @param uif      device handle.
- * @param max_freq maximum frequency (Hz) or 0 to stop the bus clock
- *                 until the start of the next command.
- */
-void LIBSDIOAPI sdio_set_max_bus_freq(sdio_uif_t uif, int max_freq);
-
-/**
- * Return the card's manufacturer (vendor) ID.
- *
- * @param uif device handle.
- *
- * @return manufacturer ID.
- */
-uint16_t LIBSDIOAPI sdio_manf_id(sdio_uif_t uif);
-
-/**
- * Return the card's card (device) ID.
- *
- * @param uif device handle.
- *
- * @return card ID.
- */
-uint16_t LIBSDIOAPI sdio_card_id(sdio_uif_t uif);
-
-/**
- * Return the standard interface code for a function.
- *
- * @param uif  device handle.
- * @param func card function to query.
- *
- * @return the standard interface.
- */
-uint8_t LIBSDIOAPI sdio_std_if(sdio_uif_t uif, int func);
-
-/**
- * Return a function's maximum supported block size.
- *
- * @param uif  device handle.
- * @param func card function to query.
- *
- * @return maximum block size.
- */
-int LIBSDIOAPI sdio_max_block_size(sdio_uif_t uif, int func);
-
-/**
- * Return a function's current block size.
- *
- * @note This returns the driver's view of the block size and not the
- * value in the function's block size register.
- *
- * @param uif  device handle.
- * @param func card function to query.
- *
- * @return the current block size.
- */
-int LIBSDIOAPI sdio_block_size(sdio_uif_t uif, int func);
-
-/**
- * Set a function's block size.
- *
- * The function's block size registers will be written if necessary.
- *
- * @param uif   device handle.
- * @param func  function to modify.
- * @param blksz the new block size; or 0 for the default size.
- *
- * @return 0 on success; or -ve on error with errno set.
- */
-int LIBSDIOAPI sdio_set_block_size(sdio_uif_t uif, int func, int blksz);
-
-/**
- * Read an 8 bit register.
- *
- * @param uif  device handle.
- * @param func card function.
- * @param addr register address.
- * @param data the data read.
- *
- * @return 0 on success; or -ve on error with errno set.
- */
-int LIBSDIOAPI sdio_read8(sdio_uif_t uif, int func, uint32_t addr, uint8_t *data);
-
-/**
- * Write an 8 bit register.
- *
- * @param uif  device handle.
- * @param func card function.
- * @param addr register address.
- * @param data the data to write.
- *
- * @return 0 on success; or -ve on error with errno set.
- */
-int LIBSDIOAPI sdio_write8(sdio_uif_t uif, int func, uint32_t addr, uint8_t data);
-
-/**
- * Read a buffer from a 8 bit wide register/FIFO.
- *
- * The buffer read uses a fixed (not incrementing) address.
- *
- * \a block_size \e must be set to the value writted into \a func's
- * I/O block size FBR register.
- *
- * If \a len % \a block_size == 0, a block mode transfer is used; a
- * byte mode transfer is used if \a len < \a block_size.
- *
- * @param uif        device handle.
- * @param func       card function.
- * @param addr       register/FIFO address.
- * @param data       buffer to store the data read.
- * @param len        length of data to read.
- * @param block_size block size to use for this transfer.
- *
- * @return 0 on success; or -ve on error with errno set.
- */
-int LIBSDIOAPI sdio_read(sdio_uif_t uif, int func, uint32_t addr, uint8_t *data,
-                      size_t len, int block_size);
-
-/**
- * Write a buffer to an 8 bit wide register/FIFO.
- *
- * The buffer write uses a fixed (not incrementing) address.
- *
- * \a block_size \e must be set to the value writted into \a func's
- * I/O block size FBR register.
- *
- * If \a len % \a block_size == 0, a block mode transfer is used; a
- * byte mode transfer is used if \a len < \a block_size.
- *
- * @param uif        device handle.
- * @param func       card function.
- * @param addr       register/FIFO address.
- * @param data       buffer of data to write.
- * @param len        length of the data to write.
- * @param block_size block size to use for this transfer.
- *
- * @return 0 on success; or -ve on error with errno set.
- */
-int LIBSDIOAPI sdio_write(sdio_uif_t uif, int func, uint32_t addr, const uint8_t *data,
-                          size_t len, int block_size);
-
-/**
- * Read an 8 bit register, without waiting for completion.
- *
- * @param uif      device handle.
- * @param func     card function.
- * @param addr     register address.
- * @param data     the data read.
- * @param callback function to be called when the read completes.
- * @param arg      argument to be passed to callback.
- *
- * @return 0 on success; or -ve on error with errno set.
- */
-int LIBSDIOAPI sdio_read8_async(sdio_uif_t uif, int func, uint32_t addr, uint8_t *data,
-                                sdio_io_callback_t callback, void *arg);
-
-/**
- * Write an 8 bit register, without waiting for completion.
- *
- * @param uif      device handle.
- * @param func     card function.
- * @param addr     register address.
- * @param data     the data to write.
- * @param callback function to be called when the write completes.
- * @param arg      argument to be passed to callback.
- *
- * @return 0 on success; or -ve on error with errno set.
- */
-int LIBSDIOAPI sdio_write8_async(sdio_uif_t uif, int func, uint32_t addr, uint8_t data,
-                                 sdio_io_callback_t callback, void *arg);
-
-/**
- * Read a buffer from a 8 bit wide register/FIFO, without waiting for
- * completion.
- *
- * The buffer read uses a fixed (not incrementing) address.
- *
- * \a block_size \e must be set to the value writted into \a func's
- * I/O block size FBR register.
- *
- * If \a len % \a block_size == 0, a block mode transfer is used; a
- * byte mode transfer is used if \a len < \a block_size.
- *
- * @param uif        device handle.
- * @param func       card function.
- * @param addr       register/FIFO address.
- * @param data       buffer to store the data read.
- * @param len        length of data to read.
- * @param block_size block size to use for this transfer.
- * @param callback   function to be called when the read completes.
- * @param arg        argument to be passed to callback.
- *
- * @return 0 on success; or -ve on error with errno set.
- */
-int LIBSDIOAPI sdio_read_async(sdio_uif_t uif, int func, uint32_t addr, uint8_t *data,
-                               size_t len, int block_size,
-                               sdio_io_callback_t callback, void *arg);
-
-/**
- * Write a buffer to an 8 bit wide register/FIFO, without waiting for
- * completion.
- *
- * The buffer write uses a fixed (not incrementing) address.
- *
- * \a block_size \e must be set to the value writted into \a func's
- * I/O block size FBR register.
- *
- * If \a len % \a block_size == 0, a block mode transfer is used; a
- * byte mode transfer is used if \a len < \a block_size.
- *
- * @param uif        device handle.
- * @param func       card function.
- * @param addr       register/FIFO address.
- * @param data       buffer of data to write.
- * @param len        length of the data to write.
- * @param block_size block size to use for this transfer.
- * @param callback   function to be called when the write completes.
- * @param arg        argument to be passed to callback.
- *
- * @return 0 on success; or -ve on error with errno set.
- */
-int LIBSDIOAPI sdio_write_async(sdio_uif_t uif, int func, uint32_t addr, const uint8_t *data,
-                                size_t len, int block_size,
-                                sdio_io_callback_t callback, void *arg);
-/**
- * Force a card removal and reinsertion.
- *
- * This will power cycle the card if the slot hardware supports power
- * control.
- *
- * @note The device handle will no longer be valid.
- *
- * @param uif device handle.
- *
- * @return 0 on success; or -ve on error with errno set.
- */
-int LIBSDIOAPI sdio_reinsert_card(sdio_uif_t uif);
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-/*@}*/
-
-#endif /* #ifndef SDIOEMB_LIBSDIO_H */
diff --git a/drivers/staging/csr/sdioemb/linux.h b/drivers/staging/csr/sdioemb/linux.h
deleted file mode 100644
index f574f716d74c..000000000000
--- a/drivers/staging/csr/sdioemb/linux.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Linux helpers for slot drivers.
- *
- * Copyright (C) 2009 Cambridge Silicon Radio Ltd.
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- */
-#ifndef SDIOEMB_LINUX_H
-#define SDIOEMB_LINUX_H
-
-#include <sdioemb/slot_api.h>
-
-int sdioemb_linux_slot_register(struct sdioemb_slot *slot);
-
-#endif /* #ifndef SDIOEMB_LINUX_H */
diff --git a/drivers/staging/csr/sdioemb/sdio.h b/drivers/staging/csr/sdioemb/sdio.h
deleted file mode 100644
index 50bb8fdd6b0f..000000000000
--- a/drivers/staging/csr/sdioemb/sdio.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Standard SDIO definitions.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- */
-#ifndef SDIOEMB_SDIO_H
-#define SDIOEMB_SDIO_H
-
-/* Maximum time for VDD to rise to VDD min. */
-#define SDIO_POWER_UP_TIME_MS 250
-
-/* Minimum SD bus clock a card must support (Hz). */
-#define SDIO_CLOCK_FREQ_MIN 400000
-
-/* Maximum clock frequency for normal mode (Hz).
- *
- * Although high speed mode should be suitable for all speeds not all
- * controller/card combinations are capable of meeting the higher
- * tolerances for (e.g.) clock rise/fall times.  Therefore, default
- * mode is used where possible for improved compatibility. */
-#define SDIO_CLOCK_FREQ_NORMAL_SPD 25000000
-
-/* Maximum clock frequency for high speed mode (Hz). */
-#define SDIO_CLOCK_FREQ_HIGH_SPD   50000000
-
-#define SDIO_MAX_FUNCTIONS 8 /* incl. F0 */
-
-/* Command argument format. */
-
-#define SDIO_CMD52_ARG_WRITE   0x80000000
-#define SDIO_CMD52_ARG_FUNC(f) ((f) << 28)
-#define SDIO_CMD52_ARG_ADDR(a) ((a) << 9)
-#define SDIO_CMD52_ARG_DATA(d) ((d) << 0)
-
-#define SDIO_CMD53_ARG_WRITE    0x80000000
-#define SDIO_CMD53_ARG_FUNC(f)  ((f) << 28)
-#define SDIO_CMD53_ARG_BLK_MODE 0x08000000
-#define SDIO_CMD53_ARG_ADDR(a)  ((a) << 9)
-#define SDIO_CMD53_ARG_CNT(c)   ((c) << 0)
-
-/* Response format. */
-
-#define SDIO_R5_DATA(r) (((r) >> 0) & 0xff)
-#define SDIO_R5_OUT_OF_RANGE    (1 <<  8)
-#define SDIO_R5_FUNCTION_NUMBER (1 <<  9)
-#define SDIO_R5_ERROR           (1 << 11)
-
-/* Register offsets and bits. */
-
-#define SDIO_OCR_CARD_READY     0x80000000
-#define SDIO_OCR_NUM_FUNCS_MASK 0x70000000
-#define SDIO_OCR_NUM_FUNCS_OFFSET 28
-#define SDIO_OCR_VOLTAGE_3V3    0x00300000 /* 3.2-3.3V & 3.3-3.4V */
-
-#define SDIO_CCCR_SDIO_REV       0x00
-#define SDIO_CCCR_SD_REV         0x01
-#define SDIO_CCCR_IO_EN          0x02
-#define SDIO_CCCR_IO_READY       0x03
-#define SDIO_CCCR_INT_EN         0x04
-#  define SDIO_CCCR_INT_EN_MIE   0x01
-#define SDIO_CCCR_INT_PENDING    0x05
-#define SDIO_CCCR_IO_ABORT       0x06
-#define SDIO_CCCR_BUS_IFACE_CNTL 0x07
-#  define SDIO_CCCR_BUS_IFACE_CNTL_CD_R_DISABLE 0x80
-#  define SDIO_CCCR_BUS_IFACE_CNTL_ECSI         0x20
-#  define SDIO_CCCR_BUS_IFACE_CNTL_4BIT_BUS     0x02
-#define SDIO_CCCR_CARD_CAPS      0x08
-#  define SDIO_CCCR_CARD_CAPS_LSC  0x40
-#  define SDIO_CCCR_CARD_CAPS_4BLS 0x80
-#define SDIO_CCCR_CIS_PTR        0x09
-#define SDIO_CCCR_BUS_SUSPEND    0x0c
-#define SDIO_CCCR_FUNC_SEL       0x0d
-#define SDIO_CCCR_EXEC_FLAGS     0x0e
-#define SDIO_CCCR_READY_FLAGS    0x0f
-#define SDIO_CCCR_F0_BLK_SIZE    0x10
-#define SDIO_CCCR_PWR_CNTL       0x12
-#define SDIO_CCCR_HIGH_SPEED     0x13
-#  define SDIO_CCCR_HIGH_SPEED_SHS 0x01
-#  define SDIO_CCCR_HIGH_SPEED_EHS 0x02
-
-#define SDIO_FBR_REG(f, r) (0x100*(f) + (r))
-
-#define SDIO_FBR_STD_IFACE(f)     SDIO_FBR_REG(f, 0x00)
-#define SDIO_FBR_STD_IFACE_EXT(f) SDIO_FBR_REG(f, 0x01)
-#define SDIO_FBR_CIS_PTR(f)       SDIO_FBR_REG(f, 0x09)
-#define SDIO_FBR_CSA_PTR(f)       SDIO_FBR_REG(f, 0x0c)
-#define SDIO_FBR_CSA_DATA(f)      SDIO_FBR_REG(f, 0x0f)
-#define SDIO_FBR_BLK_SIZE(f)      SDIO_FBR_REG(f, 0x10)
-
-#define SDIO_STD_IFACE_UART      0x01
-#define SDIO_STD_IFACE_BT_TYPE_A 0x02
-#define SDIO_STD_IFACE_BT_TYPE_B 0x03
-#define SDIO_STD_IFACE_GPS       0x04
-#define SDIO_STD_IFACE_CAMERA    0x05
-#define SDIO_STD_IFACE_PHS       0x06
-#define SDIO_STD_IFACE_WLAN      0x07
-#define SDIO_STD_IFACE_BT_TYPE_A_AMP 0x09
-
-/*
- * Manufacturer and card IDs.
- */
-#define SDIO_MANF_ID_CSR        0x032a
-
-#define SDIO_CARD_ID_CSR_UNIFI_1        0x0001
-#define SDIO_CARD_ID_CSR_UNIFI_2        0x0002
-#define SDIO_CARD_ID_CSR_BC6            0x0004
-#define SDIO_CARD_ID_CSR_DASH_D00       0x0005
-#define SDIO_CARD_ID_CSR_BC7            0x0006
-#define SDIO_CARD_ID_CSR_CINDERELLA     0x0007
-#define SDIO_CARD_ID_CSR_UNIFI_3        0x0007
-#define SDIO_CARD_ID_CSR_UNIFI_4        0x0008
-#define SDIO_CARD_ID_CSR_DASH           0x0010
-
-#endif /* #ifndef SDIOEMB_SDIO_H */
diff --git a/drivers/staging/csr/sdioemb/sdio_api.h b/drivers/staging/csr/sdioemb/sdio_api.h
deleted file mode 100644
index cd8aded7229f..000000000000
--- a/drivers/staging/csr/sdioemb/sdio_api.h
+++ /dev/null
@@ -1,408 +0,0 @@
-/*
- * SDIO device driver API.
- *
- * Copyright (C) 2007-2008 Cambridge Silicon Radio Ltd.
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- */
-#ifndef _SDIO_API_H
-#define _SDIO_API_H
-
-/**
- * @defgroup fdriver SDIO function driver API
- *
- * @brief The SDIO function driver API is used to implement drivers
- * for SDIO card functions.
- *
- * Function drivers register with the SDIO driver core
- * (sdio_register_driver()), listing which functions it supports and
- * providing callback functions for card inserts, removes and
- * interrupts.
- *
- * @par \anchor card_io_ops Card I/O operations:
- *
- * - \link sdioemb_read8(struct sdioemb_dev *, uint32_t, uint8_t *) sdioemb_read8()\endlink
- * - \link sdioemb_read16(struct sdioemb_dev *, uint32_t, uint16_t *) sdioemb_read16()\endlink
- * - \link sdioemb_write8(struct sdioemb_dev *, uint32_t, uint8_t) sdioemb_write8()\endlink
- * - \link sdioemb_write16(struct sdioemb_dev *, uint32_t, uint16_t) sdioemb_write16()\endlink
- * - \link sdioemb_f0_read8(struct sdioemb_dev *, uint32_t, uint8_t *) sdioemb_f0_read8()\endlink
- * - \link sdioemb_f0_write8(struct sdioemb_dev *, uint32_t, uint8_t) sdioemb_f0_write8()\endlink
- * - \link sdioemb_read(struct sdioemb_dev *, uint32_t, void *, size_t) sdioemb_read()\endlink
- * - \link sdioemb_write(struct sdioemb_dev *, uint32_t, const void *, size_t) sdioemb_write()\endlink
- */
-
-struct sdioemb_func_driver;
-struct sdioemb_dev;
-struct sdioemb_dev_priv;
-
-/**
- * An SDIO device.
- *
- * Each SDIO card will have an sdio_dev for each function.
- *
- * None of the fields (except for drv_data) should be written.
- *
- * @ingroup fdriver
- */
-struct sdioemb_dev {
-    struct sdioemb_func_driver *driver;        /**< Function driver for this device. */
-    uint16_t                 vendor_id;     /**< Vendor ID of the card. */
-    uint16_t                 device_id;     /**< Device ID of the card. */
-    int                      function;      /**< Function number of this device. */
-    uint8_t                  interface;     /**< SDIO standard interface number. */
-    uint16_t                 max_blocksize; /**< Maximum block size supported. */
-    uint16_t                 blocksize;     /**< Blocksize in use. */
-    int                      slot_id;       /**< ID of the slot this card is inserted into. */
-    void *                   os_device;     /**< Pointer to an OS-specific device structure. */
-    struct sdioemb_dev_priv *priv;          /**< Data private to the SDIO core. */
-    void *                   drv_data;      /**< Data private to the function driver. */
-};
-
-#define SDIOEMB_ANY_ID    0xffff
-#define SDIOEMB_UIF_FUNC  0
-#define SDIOEMB_ANY_FUNC  0xff
-#define SDIOEMB_ANY_IFACE 0xff
-
-/**
- * An entry for an SDIO device ID table.
- *
- * Functions are matched to drivers using any combination of vendor
- * ID, device ID, function number or standard interface.
- *
- * Matching on #function == SDIOEMB_UIF_FUNC is reserved for the SDIO
- * Userspace Interface driver. Card management drivers can match on
- * #function == 0, these will be probed before any function drivers.
- *
- * @ingroup fdriver
- */
-struct sdioemb_id_table {
-    uint16_t vendor_id; /**< Vendor ID to match or SDIOEMB_ANY_ID */
-    uint16_t device_id; /**< Device ID to match or SDIOEMB_ANY_ID */
-    int      function;  /**< Function number to match or SDIOEMB_ANY_FUNC */
-    uint8_t  interface; /**< SDIO standard interface to match or SDIOEMB_ANY_IFACE */
-};
-
-/**
- * A driver for an SDIO function.
- *
- * @ingroup fdriver
- */
-struct sdioemb_func_driver {
-    /**
-     * Driver name used in diagnostics.
-     */
-    const char *name;
-
-    /**
-     * 0 terminated array of functions supported by this device.
-     *
-     * The driver may (for example) match on a number of vendor
-     * ID/device ID/function number triplets or on an SDIO standard
-     * interface.
-     */
-    struct sdioemb_id_table *id_table;
-
-    /**
-     * Called by the core when an inserted card has functions which
-     * match those listed in id_table.
-     *
-     * The driver's implementation should (if required):
-     *
-     *   - perform any additional probing
-     *   - do function specific initialization
-     *   - allocate and register any function/OS specific devices or interfaces.
-     *
-     * Called in: thread context.
-     *
-     * @param fdev the newly inserted device.
-     *
-     * @return 0 on success; -ve on error.
-     */
-    int (*probe)(struct sdioemb_dev *fdev);
-
-    /**
-     * Called by the core when a card is removed.  This is only called
-     * if the probe() call succeeded.
-     *
-     * The driver's implementation should (if required);
-     *
-     *   - do any function specific shutdown.
-     *   - cleanup any data structures created/registers during probe().
-     *
-     * Called in: thread context.
-     *
-     * @param fdev the device being removed.
-     */
-    void (*remove)(struct sdioemb_dev *fdev);
-
-    /**
-     * Called by the core to signal an SDIO interrupt for this card
-     * occurs, if interrupts have been enabled with
-     * sdioemb_interrupt_enable().
-     *
-     * The driver's implementation should signal a thread (or similar)
-     * to actually handle the interrupt as no card I/O may be
-     * performed whilst in interrupt context. When the interrupt is
-     * handled, the driver should call sdioemb_interrupt_acknowledge() to
-     * enable further interrupts to be signalled.
-     *
-     * Called in: interrupt context.
-     *
-     * @param fdev the device which may have raised the interrupt.
-     */
-    void (*card_int_handler)(struct sdioemb_dev *fdev);
-
-    /**
-     * Called by the core to signal a suspend power management
-     * event occured.
-     *
-     * The driver's implementation should (if required)
-     * set the card to a low power mode and return as soon
-     * as possible. After this function returns, the
-     * driver should not start any SDIO commands.
-     *
-     * Called in: thread context.
-     *
-     * @param fdev the device handler.
-     */
-    void (*suspend)(struct sdioemb_dev *fdev);
-
-    /**
-     * Called by the core to signal a resume power management
-     * event occured.
-     *
-     * The driver's implementation should (if required)
-     * initialise the card to an operational mode and return
-     * as soon as possible. If the card has been powered off
-     * during suspend, the driver would have to initialise
-     * the card from scratch (f/w download, h/w initialisation, etc.).
-     *
-     * Called in: thread context.
-     *
-     * @param fdev the device handler.
-     */
-    void (*resume)(struct sdioemb_dev *fdev);
-};
-
-int  sdioemb_driver_register(struct sdioemb_func_driver *fdriver);
-void sdioemb_driver_unregister(struct sdioemb_func_driver *fdriver);
-
-int sdioemb_driver_probe(struct sdioemb_func_driver *fdriver, struct sdioemb_dev *fdev);
-void sdioemb_driver_remove(struct sdioemb_func_driver *fdriver, struct sdioemb_dev *fdev);
-
-/* For backward compatibility. */
-#define sdio_register_driver sdioemb_driver_register
-#define sdio_unregister_driver sdioemb_driver_unregister
-
-int sdioemb_set_block_size(struct sdioemb_dev *fdev, uint16_t blksz);
-void sdioemb_set_max_bus_freq(struct sdioemb_dev *fdev, int max_freq);
-int sdioemb_set_bus_width(struct sdioemb_dev *fdev, int bus_width);
-
-int sdioemb_enable_function(struct sdioemb_dev *fdev);
-int sdioemb_disable_function(struct sdioemb_dev *fdev);
-int sdioemb_reenable_csr_function(struct sdioemb_dev *dev);
-void sdioemb_idle_function(struct sdioemb_dev *fdev);
-
-int sdioemb_read8(struct sdioemb_dev *fdev, uint32_t addr, uint8_t *val);
-int sdioemb_read16(struct sdioemb_dev *fdev, uint32_t addr, uint16_t *val);
-int sdioemb_write8(struct sdioemb_dev *fdev, uint32_t addr, uint8_t val);
-int sdioemb_write16(struct sdioemb_dev *fdev, uint32_t addr, uint16_t val);
-int sdioemb_f0_read8(struct sdioemb_dev *fdev, uint32_t addr, uint8_t *val);
-int sdioemb_f0_write8(struct sdioemb_dev *fdev, uint32_t addr, uint8_t val);
-int sdioemb_read(struct sdioemb_dev *fdev, uint32_t addr, void *data, size_t len);
-int sdioemb_write(struct sdioemb_dev *fdev, uint32_t addr, const void *data, size_t len);
-
-int sdioemb_hard_reset(struct sdioemb_dev *fdev);
-
-void sdioemb_power_on(struct sdioemb_dev *fdev);
-void sdioemb_power_off(struct sdioemb_dev *fdev);
-
-int sdioemb_interrupt_enable(struct sdioemb_dev *fdev);
-int sdioemb_interrupt_disable(struct sdioemb_dev *fdev);
-void sdioemb_interrupt_acknowledge(struct sdioemb_dev *fdev);
-
-int sdioemb_cis_get_tuple(struct sdioemb_dev *fdev, uint8_t tuple,
-                       void *buf, size_t len);
-
-void sdioemb_suspend_function(struct sdioemb_dev *fdev);
-void sdioemb_resume_function(struct sdioemb_dev *fdev);
-
-/**
- * SDIO command status.
- *
- * @ingroup fdriver
- */
-enum sdioemb_cmd_status {
-    SDIOEMB_CMD_OK          = 0x00, /**< Command successful. */
-
-    SDIOEMB_CMD_ERR_CMD     = 0x01,
-    SDIOEMB_CMD_ERR_DAT     = 0x02,
-
-    SDIOEMB_CMD_ERR_CRC     = 0x10,
-    SDIOEMB_CMD_ERR_TIMEOUT = 0x20,
-    SDIOEMB_CMD_ERR_OTHER   = 0x40,
-
-    SDIOEMB_CMD_ERR_CMD_CRC     = SDIOEMB_CMD_ERR_CMD | SDIOEMB_CMD_ERR_CRC,     /**< Response CRC error. */
-    SDIOEMB_CMD_ERR_CMD_TIMEOUT = SDIOEMB_CMD_ERR_CMD | SDIOEMB_CMD_ERR_TIMEOUT, /**< Response time out. */
-    SDIOEMB_CMD_ERR_CMD_OTHER   = SDIOEMB_CMD_ERR_CMD | SDIOEMB_CMD_ERR_OTHER,   /**< Other response error. */
-    SDIOEMB_CMD_ERR_DAT_CRC     = SDIOEMB_CMD_ERR_DAT | SDIOEMB_CMD_ERR_CRC,     /**< Data CRC error. */
-    SDIOEMB_CMD_ERR_DAT_TIMEOUT = SDIOEMB_CMD_ERR_DAT | SDIOEMB_CMD_ERR_TIMEOUT, /**< Data receive time out. */
-    SDIOEMB_CMD_ERR_DAT_OTHER   = SDIOEMB_CMD_ERR_DAT | SDIOEMB_CMD_ERR_OTHER,   /**< Other data error. */
-
-    SDIOEMB_CMD_ERR_NO_CARD = 0x04, /**< No card present. */
-
-    SDIOEMB_CMD_IN_PROGRESS = 0xff, /**< Command still in progress. */
-};
-
-/**
- * A response to an SDIO command.
- *
- * For R1, R4, R5, and R6 responses only the middle 32 bits of the
- * response are stored, the leading octet (start and direction bits
- * and command index) and trailing octet (CRC and stop bit) are
- * discarded.
- *
- * @bug R2 and R3 responses are not used by SDIO and are not
- * supported.
- *
- * @ingroup fdriver
- */
-union sdioemb_response {
-    uint32_t r1;
-    uint32_t r4;
-    uint32_t r5;
-    uint32_t r6;
-};
-
-/**
- * SDIO command parameters and response.
- */
-struct sdioemb_cmd_resp {
-    uint8_t  cmd;                 /**< Command index (0 to 63). */
-    uint32_t arg;                 /**< Command argument. */
-    union sdioemb_response response; /**< Response to the command. Valid
-                                     iff the command has completed and
-                                     (sdio_cmd::status & SDIOEMB_CMD_ERR_CMD) == 0.*/
-};
-
-/**
- * CSPI command parameters and response.
- */
-struct cspi_cmd_resp {
-    unsigned cmd : 8;  /**< Command octet (type, and function). */
-    unsigned addr: 24; /**< 24 bit address. */
-    uint16_t val;      /**< Word to write or read from the card (for non-burst commands). */
-    uint8_t  response; /**< Response octet.  Valid iff the command has completed and
-                          (sdio_cmd::status & SDIOEMB_CMD_ERR_CMD) == 0. */
-};
-
-
-/**
- * An SDIO command, its status and response.
- *
- * sdio_cmd is used to submit SDIO commands to a device and return its
- * status and any response or data.
- *
- * @ingroup fdriver
- */
-struct sdioemb_cmd {
-    /**
-     * The SDIO device which submitted the command.  Set by the
-     * core.
-     */
-    struct sdioemb_dev *owner;
-
-    /**
-     * Called by the core when the command has been completed.
-     *
-     * Called in: interrupt context.
-     *
-     * @param cmd the completed command.
-     */
-    void (*callback)(struct sdioemb_cmd *cmd);
-
-    /**
-     * Set of flags specifying the response type, data transfer
-     * direction and other parameters.
-     *
-     * For SDIO commands set at least one of the response types:
-     *   - #SDIOEMB_CMD_FLAG_RESP_NONE
-     *   - #SDIOEMB_CMD_FLAG_RESP_R1
-     *   - #SDIOEMB_CMD_FLAG_RESP_R1B
-     *   - #SDIOEMB_CMD_FLAG_RESP_R2
-     *   - #SDIOEMB_CMD_FLAG_RESP_R3
-     *   - #SDIOEMB_CMD_FLAG_RESP_R4
-     *   - #SDIOEMB_CMD_FLAG_RESP_R5
-     *   - #SDIOEMB_CMD_FLAG_RESP_R5B
-     *   - #SDIOEMB_CMD_FLAG_RESP_R6
-     *
-     * and any of the additional flags:
-     *   - #SDIOEMB_CMD_FLAG_READ
-     *
-     * For CSPI commands set:
-     *   - #SDIOEMB_CMD_FLAG_CSPI
-     */
-    unsigned flags;
-
-    /**
-     * SDIO command parameters and response.
-     *
-     * Valid only if #SDIOEMB_CMD_FLAG_CSPI is \e not set in #flags.
-     */
-    struct sdioemb_cmd_resp sdio;
-
-    /**
-     * CSPI command parameters and response.
-     *
-     * Valid only if #SDIOEMB_CMD_FLAG_CSPI is set in #flags.
-     */
-    struct cspi_cmd_resp cspi;
-
-    /**
-     * Buffer of data to read or write.
-     *
-     * Must be set to NULL if the command is not a data transfer.
-     */
-    uint8_t *data;
-
-    /**
-     * Length of #data in octets.
-     *
-     * len must be either: less than the device's sdio_dev::blocksize;
-     * or a multiple of the device's sdio_dev::blocksize.
-     */
-    size_t len;
-
-    /**
-     * Status of the command after it has completed.
-     */
-    enum sdioemb_cmd_status status;
-
-    /**
-     * Data private to caller of sdioemb_start_cmd().
-     */
-    void *priv;
-};
-
-/** @addtogroup fdriver
- *@{*/
-#define SDIOEMB_CMD_FLAG_RESP_NONE 0x00 /**< No response. */
-#define SDIOEMB_CMD_FLAG_RESP_R1   0x01 /**< R1 response. */
-#define SDIOEMB_CMD_FLAG_RESP_R1B  0x02 /**< R1b response. */
-#define SDIOEMB_CMD_FLAG_RESP_R2   0x03 /**< R2 response. */
-#define SDIOEMB_CMD_FLAG_RESP_R3   0x04 /**< R3 response. */
-#define SDIOEMB_CMD_FLAG_RESP_R4   0x05 /**< R4 response. */
-#define SDIOEMB_CMD_FLAG_RESP_R5   0x06 /**< R5 response. */
-#define SDIOEMB_CMD_FLAG_RESP_R5B  0x07 /**< R5b response. */
-#define SDIOEMB_CMD_FLAG_RESP_R6   0x08 /**< R6 response. */
-#define SDIOEMB_CMD_FLAG_RESP_MASK 0xff /**< Mask for response type. */
-#define SDIOEMB_CMD_FLAG_RAW     0x0100 /**< @internal Bypass the command queues. */
-#define SDIOEMB_CMD_FLAG_READ    0x0200 /**< Data transfer is a read, not a write. */
-#define SDIOEMB_CMD_FLAG_CSPI    0x0400 /**< CSPI transfer, not SDIO or SDIO-SPI. */
-#define SDIOEMB_CMD_FLAG_ABORT   0x0800 /**< Data transfer abort command. */
-/*@}*/
-
-int sdioemb_start_cmd(struct sdioemb_dev *fdev, struct sdioemb_cmd *cmd);
-
-#endif /* #ifndef _SDIO_API_H */
diff --git a/drivers/staging/csr/sdioemb/sdio_bt_a.h b/drivers/staging/csr/sdioemb/sdio_bt_a.h
deleted file mode 100644
index 9efe4a390db5..000000000000
--- a/drivers/staging/csr/sdioemb/sdio_bt_a.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * SDIO Bluetooth Type-A interface definitions.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- */
-#ifndef SDIOEMB_SDIO_BT_A_H
-#define SDIOEMB_SDIO_BT_A_H
-
-#include <sdioemb/sdio_csr.h>
-#include <csr_sdio.h>
-
-/*
- * Standard SDIO function registers for a Bluetooth Type-A interface.
- */
-#define SDIO_BT_A_RD 0x00
-#define SDIO_BT_A_TD 0x00
-
-#define SDIO_BT_A_RX_PKT_CTRL 0x10
-#  define PC_RRT 0x01
-
-#define SDIO_BT_A_TX_PKT_CTRL 0x11
-#  define PC_WRT 0x01
-
-#define SDIO_BT_A_RETRY_CTRL  0x12
-#  define RTC_STAT 0x01
-#  define RTC_SET  0x01
-
-#define SDIO_BT_A_INTRD       0x13
-#  define INTRD 0x01
-#  define CL_INTRD 0x01
-
-#define SDIO_BT_A_INT_EN      0x14
-#  define EN_INTRD 0x01
-
-#define SDIO_BT_A_BT_MODE     0x20
-#  define MD_STAT 0x01
-
-/*
- * Length of the Type-A header.
- *
- * Packet length (3 octets) plus Service ID (1 octet).
- */
-#define SDIO_BT_A_HEADER_LEN 4
-
-/*
- * Maximum length of a Type-A transport packet.
- *
- * Type-A header length and maximum length of a HCI packet (65535
- * octets).
- */
-#define SDIO_BT_A_PACKET_LEN_MAX 65543
-
-enum sdioemb_bt_a_service_id {
-    SDIO_BT_A_SID_CMD    = 0x01,
-    SDIO_BT_A_SID_ACL    = 0x02,
-    SDIO_BT_A_SID_SCO    = 0x03,
-    SDIO_BT_A_SID_EVT    = 0x04,
-    SDIO_BT_A_SID_VENDOR = 0xfe,
-};
-
-static __inline int sdioemb_bt_a_packet_len(const char *p)
-{
-    return (p[0] & 0xff) | ((p[1] & 0xff) << 8) | ((p[2] & 0xff) << 16);
-}
-
-static __inline int sdioemb_bt_a_service_id(const char *p)
-{
-    return p[3];
-}
-
-/*
- * Minimum amount to read (including the Type-A header). This allows
- * short packets (e.g., flow control packets) to be read with a single
- * command.
- */
-#define SDIO_BT_A_MIN_READ 32
-
-#define SDIO_BT_A_NAME_LEN 16
-
-struct sdioemb_bt_a_dev {
-    CsrSdioFunction *func;
-    char name[SDIO_BT_A_NAME_LEN];
-    void *drv_data;
-
-    /**
-     * Get a buffer to receive a packet into.
-     *
-     * @param bt the BT device.
-     * @param header a buffer of length #SDIO_BT_A_MIN_READ containing
-     *      (part of) the packet the buffer is for.  It will contain
-     *      the Type-A header and as much of the payload that will
-     *      fit.
-     * @param buffer_min_len the minimum length of buffer required to
-     *     receive the whole packet.  This includes space for padding
-     *     the read to a whole number of blocks (if more than 512
-     *     octets is still to be read).
-     * @param buffer returns the buffer. The packet (including the
-     *     Type-A header will be placed at the beginning of this
-     *     buffer.
-     * @param buffer_handle returns a buffer handle passed to the
-     *     subsequent call of the receive() callback.
-     *
-     * @return 0 if a buffer was provided.
-     * @return -ENOMEM if no buffer could be provided.
-     */
-    int (*get_rx_buffer)(struct sdioemb_bt_a_dev *bt, const uint8_t *header,
-                         size_t buffer_min_len, uint8_t **buffer, void **buffer_handle);
-    void (*receive)(struct sdioemb_bt_a_dev *bt, void *buffer_handle, int status);
-    void (*sleep_state_changed)(struct sdioemb_bt_a_dev *bt);
-
-    enum sdio_sleep_state sleep_state;
-
-    uint8_t  max_tx_retries;
-    uint8_t  max_rx_retries;
-    unsigned needs_read_ack:1;
-    unsigned wait_for_firmware:1;
-
-    unsigned rx_off:1;
-
-    /**
-     * A buffer to read the packet header into before the real buffer
-     * is requested with the get_rx_buffer() callback.
-     *
-     * @internal
-     */
-    uint8_t *header;
-};
-
-int  sdioemb_bt_a_setup(struct sdioemb_bt_a_dev *bt, CsrSdioFunction *func);
-void sdioemb_bt_a_cleanup(struct sdioemb_bt_a_dev *bt);
-int  sdioemb_bt_a_send(struct sdioemb_bt_a_dev *bt, const uint8_t *packet, size_t len);
-void sdioemb_bt_a_handle_interrupt(struct sdioemb_bt_a_dev *bt);
-void sdioemb_bt_a_set_sleep_state(struct sdioemb_bt_a_dev *bt, enum sdio_sleep_state state);
-int  sdioemb_bt_a_check_for_reset(struct sdioemb_bt_a_dev *bt);
-void sdioemb_bt_a_start(struct sdioemb_bt_a_dev *bt);
-void sdioemb_bt_a_stop(struct sdioemb_bt_a_dev *bt);
-void sdioemb_bt_a_rx_on(struct sdioemb_bt_a_dev *bt);
-void sdioemb_bt_a_rx_off(struct sdioemb_bt_a_dev *bt);
-
-#endif /* #ifndef SDIOEMB_SDIO_BT_A_H */
diff --git a/drivers/staging/csr/sdioemb/sdio_cis.h b/drivers/staging/csr/sdioemb/sdio_cis.h
deleted file mode 100644
index ec5e8fc38006..000000000000
--- a/drivers/staging/csr/sdioemb/sdio_cis.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * SDIO CIS definitions.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- */
-#ifndef _SDIO_CIS_H
-#define _SDIO_CIS_H
-
-#define CISTPL_NULL     0x00
-#define CISTPL_CHECKSUM 0x10
-#define CISTPL_VERS_1   0x15
-#define CISTPL_ALTSTR   0x16
-#define CISTPL_MANFID   0x20
-#  define CISTPL_MANFID_SIZE 0x04
-#define CISTPL_FUNCID   0x21
-#define CISTPL_FUNCE    0x22
-#define CISTPL_SDIO_STD 0x91
-#define CISTPL_SDIO_EXT 0x92
-#define CISTPL_END      0xff
-#define CISTPL_FUNCE  0x22
-#  define CISTPL_FUNCE_00_SIZE 0x04
-#  define CISTPL_FUNCE_01_SIZE 0x2a
-
-#endif /* #ifndef _SDIO_CIS_H */
diff --git a/drivers/staging/csr/sdioemb/sdio_csr.h b/drivers/staging/csr/sdioemb/sdio_csr.h
deleted file mode 100644
index 3b00e4626cab..000000000000
--- a/drivers/staging/csr/sdioemb/sdio_csr.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * CSR specific SDIO registers.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- */
-#ifndef SDIOEMB_SDIO_CSR_H
-#define SDIOEMB_SDIO_CSR_H
-
-/**
- * @defgroup registers CSR specific SDIO registers
- *
- * Registers at 0xF0 - 0xFF in the CCCR are reserved for vendor
- * specific registers.  The registers documented here are specific to
- * following CSR chips:
- *
- *   - BlueCore (6 and later)
- *   - UltraCore
- *@{
- */
-
-/**
- * Interrupt status/host wakeup register.
- *
- * This controls a function's deep sleep state.
- *
- * @see enum sdio_sleep_state
- */
-#define SDIO_CSR_SLEEP_STATE 0xf0
-#  define SDIO_CSR_SLEEP_STATE_FUNC(f) ((f) << 4)
-#  define SDIO_CSR_SLEEP_STATE_RDY_INT_EN  0x02
-#  define SDIO_CSR_SLEEP_STATE_WAKE_REQ    0x01
-
-/**
- * Host interrupt clear register.
- *
- * Writing a 1 to bit 0 clears an SDIO interrupt raised by a generic
- * function.
- */
-#define SDIO_CSR_HOST_INT 0xf1
-#  define SDIO_CSR_HOST_INT_CL 0x01
-
-/**
- * From host scratch register 0.
- *
- * A read/write register that can be used for signalling between the
- * host and the chip.
- *
- * The usage of this register depends on the version of the chip or
- * firmware.
- */
-#define SDIO_CSR_FROM_HOST_SCRATCH0 0xf2
-
-/**
- * From host scratch register 1.
- *
- * @see SDIO_CSR_FROM_HOST_SCRATCH0
- */
-#define SDIO_CSR_FROM_HOST_SCRATCH1 0xf3
-
-/**
- * To host scratch register 0.
- *
- * A read only register that may be used for signalling between the
- * chip and the host.
- *
- * The usage of this register depends on the version of the chip or
- * firmware.
- */
-#define SDIO_CSR_TO_HOST_SCRATCH0 0xf4
-
-/**
- * To host scratch register 1.
- *
- * @see SDIO_CSR_TO_HOST_SCRATCH0
- */
-#define SDIO_CSR_TO_HOST_SCRATCH1 0xf5
-
-/**
- * Extended I/O enable.
- *
- * Similar to the standard CCCR I/O Enable register, this is used to
- * detect if an internal reset of a function has occured and
- * (optionally) reenable it.
- *
- * An internal reset is detected by CCCR I/O Enable bit being set and
- * the corresponding EXT_IO_EN bit being clear.
- */
-#define SDIO_CSR_EXT_IO_EN 0xf6
-
-/**
- * Deep sleep states as set via the sleep state register.
- *
- * These states are used to control when the chip may go into a deep
- * sleep (a low power mode).
- *
- * Since a chip in deep sleep may not respond to SDIO commands, the
- * host should ensure that the chip is not in deep sleep before
- * attempting SDIO commands to functions 1 to 7.
- *
- * The available states are:
- *
- * AWAKE - chip must not enter deep sleep and should exit deep sleep
- * if it's currently sleeping.
- *
- * TORPID - chip may enter deep sleep.
- *
- * DROWSY - a transition state between TORPID and AWAKE.  This is
- * AWAKE plus the chip asserts an interrupt when the chip is awake.
- *
- * @see SDIO_CSR_SLEEP_STATE
- */
-enum sdio_sleep_state {
-    SLEEP_STATE_AWAKE  = SDIO_CSR_SLEEP_STATE_WAKE_REQ,
-    SLEEP_STATE_DROWSY = SDIO_CSR_SLEEP_STATE_WAKE_REQ | SDIO_CSR_SLEEP_STATE_RDY_INT_EN,
-    SLEEP_STATE_TORPID = 0x00,
-};
-
-/*@}*/
-
-/*
- * Generic function registers (with byte addresses).
- */
-
-/*
- * SDIO_MODE is chip dependant, see the sdio_mode table in sdio_cspi.c
- * to add support for new chips.
- */
-#define SDIO_MODE /* chip dependant */
-#  define SDIO_MODE_CSPI_EN 0x40
-
-#endif /* SDIOEMB_SDIO_CSR_H */
diff --git a/drivers/staging/csr/sdioemb/slot_api.h b/drivers/staging/csr/sdioemb/slot_api.h
deleted file mode 100644
index 777bdd4a6df8..000000000000
--- a/drivers/staging/csr/sdioemb/slot_api.h
+++ /dev/null
@@ -1,313 +0,0 @@
-/*
- * Slot driver API.
- *
- * Copyright (C) 2007-2009 Cambridge Silicon Radio Ltd.
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- */
-#ifndef _SLOT_API_H
-#define _SLOT_API_H
-
-#include <sdioemb/sdio_api.h>
-
-struct sdioemb_slot;
-
-/**
- * @defgroup sdriver SDIO slot driver API
- *
- * @brief The SDIO slot driver API provides an interface for the SDIO
- * layer to driver an SDIO slot (socket).
- *
- * Slot drivers register with the SDIO layer (sdioemb_slot_register()),
- * providing functions to starting commands, enabling/disable card
- * interrupts, card detection and bus power control.
- *
- * Functions are provided to notify the SDIO layer when a command has
- * completed (sdioemb_cmd_complete()) and when an SDIO card interrupt has
- * occurred (sdioemb_interrupt()).
- */
-
-#define SDIOEMB_BUS_FREQ_OFF      0
-#define SDIOEMB_BUS_FREQ_DEFAULT -1
-#define SDIOEMB_BUS_FREQ_IDLE    -2
-
-/**
- * Valid SDIO bus voltage levels.
- *
- * @ingroup sdriver
- */
-enum sdioemb_power {
-    SDIOEMB_POWER_OFF  =   0, /**< Power switched off. */
-    SDIOEMB_POWER_3V3  =  33, /**< Voltage set to 3.3V. */
-};
-
-/**
- * SDIO slot capabilities.
- *
- * @ingroup sdriver
- */
-struct slot_caps {
-    int max_bus_freq;  /**< Maximum bus frequency (Hz). */
-    int max_bus_width; /**< Maximum bus width supported (1 or 4 data lines). */
-    uint8_t cspi_mode; /**< CSPI_MODE register value (for CSPI capable slots). */
-};
-
-/**
- * Controller hardware type.
- *
- * @ingroup sdriver
- */
-enum slot_controller_type {
-    SDIOEMB_SLOT_TYPE_SD = 0,   /**< SD/SDIO controller. */
-    SDIOEMB_SLOT_TYPE_SPI,      /**< SPI controller. */
-    SDIOEMB_SLOT_TYPE_SPI_CSPI, /**< SPI controller capable of CSPI. */
-};
-
-/**
- * Return values from the add_function() notifier.
- *
- * @ingroup sdriver
- */
-enum sdioemb_add_func_status {
-    /**
-     * The core will call sdioemb_add_function().
-     */
-    SDIOEMB_ADD_FUNC_NOW = 0,
-    /**
-     * The slot driver will call sdioemb_add_function() or the
-     * function driver will call sdioemb_driver_probe() directly.
-     */
-    SDIOEMB_ADD_FUNC_DEFERRED = 1,
-};
-
-/**
- * Slot/card event notifiers.
- *
- * A slot driver may be notified when certain slot or card events
- * occur.
- *
- * @ingroup sdriver
- */
-struct sdioemb_slot_notifiers {
-    /**
-     * This is called when a card function has been enumerated
-     * and initialized but before can be bound to a function driver.
-     *
-     * A slot driver may use this to create an OS-specific object for
-     * the function.  The slot driver must either (a) return
-     * SDIOEMB_ADD_FUNC_NOW; (b) return SDIOEMB_ADD_FUNC_DEFERRED and
-     * call sdioemb_add_function() later on; (c) return
-     * SDIOEMB_ADD_FUNC_DEFERRED and pass the fdev to the function
-     * driver for it to call sdioemb_driver_probe() directly; or (d)
-     * return an error.
-     *
-     * The slot driver may need to get a reference to the fdev with
-     * sdioemb_get_function() if the lifetime of the OS-specific
-     * object extends beyond the subsequent return of the
-     * del_function() callback.
-     *
-     * If this is non-NULL the slot driver must also provide
-     * del_function().
-     *
-     * @param slot the SDIO slot producing the notification.
-     * @param fdev the SDIO function being added.
-     *
-     * @return SDIOEMB_ADD_FUNC_NOW if the function is ready for use.
-     * @return SDIOEMB_ADD_FUNC_DEFERRED if sdioemb_add_function() or
-     *         sdioemb_driver_probe() will be called later.
-     * @return -ve on a error.
-     */
-    int (*add_function)(struct sdioemb_slot *slot, struct sdioemb_dev *fdev);
-
-    /**
-     * This is called when a card function is being removed and after
-     * any function driver has been unbound.
-     *
-     * A slot driver may use this to delete any OS-specific object
-     * created by the add_function() notifier.
-     *
-     * @param slot the SDIO slot producing the notification.
-     * @param fdev the SDIO function being deleted.
-     */
-    void (*del_function)(struct sdioemb_slot *slot, struct sdioemb_dev *fdev);
-};
-
-struct sdioemb_slot_priv;
-
-/**
- * An SDIO slot driver.
- *
- * Allocate and free with sdioemb_slot_alloc() and sdioemb_slot_free().
- *
- * @ingroup sdriver
- */
-struct sdioemb_slot {
-    /**
-     * Name of the slot used in diagnostic messages.
-     *
-     * This would typically include the name of the SDIO controller
-     * and the slot number if the controller has multiple slots.
-     *
-     * This will be set by sdioemb_slot_register() if it is left as an
-     * empty string.
-     */
-    char name[64];
-
-    /**
-     * Controller hardware type.
-     */
-    enum slot_controller_type type;
-
-    /**
-     * Set the SD bus clock frequency.
-     *
-     * The driver's implementation should set the SD bus clock to not
-     * more than \a clk Hz (unless \a clk is equal to
-     * #SDIOEMB_BUS_FREQ_OFF or #SDIOEMB_BUS_FREQ_IDLE).
-     *
-     * If \a clk == SDIOEMB_BUS_FREQ_OFF the clock should be stopped.
-     *
-     * \a clk == SDIOEMB_BUS_FREQ_IDLE indicates that the bus is idle
-     * (currently unused) and the host controller may slow (or stop)
-     * the SD bus clock to save power on the card.  During this idle
-     * state the host controller must be capable of receiving SDIO
-     * interrupts (for certain host controllers this may require
-     * leaving the clock running).
-     *
-     * If \a clk is greater than #SDIO_CLOCK_FREQ_NORMAL_SPD (25 MHz)
-     * subsequent commands should be done with the controller in high
-     * speed mode.
-     *
-     * Called from: interrupt context.
-     *
-     * @param slot  the slot to configure.
-     * @param clk   new SD bus clock frequency in Hz, SDIOEMB_BUS_FREQ_OFF
-     *              or SDIOEMB_BUS_FREQ_IDLE.
-     *
-     * @return The bus frequency actually configured in Hz.
-     */
-    int (*set_bus_freq)(struct sdioemb_slot *slot, int clk);
-
-    /**
-     * Set the SD bus width.
-     *
-     * The driver's implementation should set the width of the SD bus
-     * for all subsequent data transfers to the specified value.
-     *
-     * This may be NULL if the driver sets the bus width when starting
-     * a command, or the driver is for an SDIO-SPI or CSPI controller.
-     *
-     * Called from: thread context.
-     *
-     * @param slot      the slot to configure.
-     * @param bus_width new SD bus width (either 1 or 4).
-     *
-     * @return 0 on success.
-     * @return -ve if a low-level error occured when setting the bus width.
-     */
-    int (*set_bus_width)(struct sdioemb_slot *slot, int bus_width);
-
-    /**
-     * Start an SDIO command.
-     *
-     * The driver's implementation should:
-     *
-     *   - set the controller's bus width to #bus_width,
-     *   - program the controller to start the command.
-     *
-     * Called from: interrupt context.
-     *
-     * @param slot  slot to perform the command.
-     * @param cmd   SDIO command to start.
-     */
-    int (*start_cmd)(struct sdioemb_slot *slot, struct sdioemb_cmd *cmd);
-
-    /**
-     * Detect if a card is inserted into the slot.
-     *
-     * Called from: thread context.
-     *
-     * @param slot slot to check.
-     *
-     * @return non-zero if a card is inserted; 0 otherwise.
-     */
-    int (*card_present)(struct sdioemb_slot *slot);
-
-    /**
-     * Switch on/off the SDIO bus power and set the SDIO bus voltage.
-     *
-     * Called from: thread context.
-     *
-     * @param slot  the slot.
-     * @param power the requested voltage.
-     *
-     * @return 0 on success; -ve on error: -EINVAL - requested voltage
-     * is not supported.
-     */
-    int (*card_power)(struct sdioemb_slot *slot, enum sdioemb_power power);
-
-    /**
-     * Enable (unmask) the SDIO card interrupt on the controller.
-     *
-     * Called from: interrupt context.
-     *
-     * @param slot the slot to enable the interrupt on..
-     */
-    void (*enable_card_int)(struct sdioemb_slot *slot);
-
-    /**
-     * Disable (mask) the SDIO card interrupt on the controller.
-     *
-     * Called from: thread context.
-     *
-     * @param slot the slot to disable the interrupt on.
-     */
-    void (*disable_card_int)(struct sdioemb_slot *slot);
-
-    /**
-     * Perform a hard reset of the card.
-     *
-     * Hard resets can be achieved in two ways:
-     *
-     * -# Power cycle (if the slot has power control).
-     * -# Platform-specific assertion of a card/chip reset line.
-     *
-     * If hard resets are not supported, either return 0 or set
-     * hard_reset to NULL.
-     *
-     * @param slot the slot for the card to reset.
-     *
-     * @return 0 if a hard reset was performed.
-     * @return 1 if hard resets are not supported.
-     */
-    int (*hard_reset)(struct sdioemb_slot *slot);
-
-    struct slot_caps         caps;           /**< Slot capabilities. */
-    int                      clock_freq;     /**< SD bus frequency requested by the SDIO layer. */
-    int                      bus_width;      /**< Bus width requested by the SDIO layer. */
-    struct sdioemb_slot_notifiers notifs;    /**< Slot event notifiers. */
-    int                      cspi_reg_pad;   /**< Padding for CSPI register reads. */
-    int                      cspi_burst_pad; /**< Padding for CSPI burst reads. */
-    struct sdioemb_slot_priv *priv;          /**< Data private to the SDIO layer. */
-    void *                   drv_data;       /**< Data private to the slot driver. */
-};
-
-struct sdioemb_slot *sdioemb_slot_alloc(size_t drv_data_size);
-void sdioemb_slot_free(struct sdioemb_slot *slot);
-int sdioemb_slot_register(struct sdioemb_slot *slot);
-void sdioemb_slot_unregister(struct sdioemb_slot *slot);
-int sdioemb_card_inserted(struct sdioemb_slot *slot);
-void sdioemb_card_removed(struct sdioemb_slot *slot);
-void sdioemb_interrupt(struct sdioemb_slot *slot);
-void sdioemb_cmd_complete(struct sdioemb_slot *slot, struct sdioemb_cmd *cmd);
-
-void sdioemb_suspend(struct sdioemb_slot *slot);
-void sdioemb_resume(struct sdioemb_slot *slot);
-
-void sdioemb_add_function(struct sdioemb_dev *fdev);
-void sdioemb_del_function(struct sdioemb_dev *fdev);
-void sdioemb_get_function(struct sdioemb_dev *fdev);
-void sdioemb_put_function(struct sdioemb_dev *fdev);
-
-#endif /* #ifndef _SLOT_API_H */
diff --git a/drivers/staging/csr/sdioemb/slot_imx27.h b/drivers/staging/csr/sdioemb/slot_imx27.h
deleted file mode 100644
index 3aa2235d87c1..000000000000
--- a/drivers/staging/csr/sdioemb/slot_imx27.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * i.MX27 SDHC definitions.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- */
-#ifndef _SLOT_IMX27_H
-#define _SLOT_IMX27_H
-
-/*
- * i.MX27 SDHC registers.
- */
-
-#define SDHC_STR_STP_CLK  0x00
-#  define STR_STP_CLK_MMCSD_RESET 0x0008
-#  define STR_STP_CLK_START_CLK   0x0002
-#  define STR_STP_CLK_STOP_CLK    0x0001
-
-#define SDHC_STATUS       0x04
-#  define STATUS_CARD_PRESENCE    0x8000
-#  define STATUS_SDIO_INT_ACTIVE  0x4000
-#  define STATUS_END_CMD_RESP     0x2000
-#  define STATUS_WRITE_OP_DONE    0x1000
-#  define STATUS_READ_OP_DONE     0x0800
-#  define STATUS_CARD_BUS_CLK_RUN 0x0100
-#  define STATUS_APPL_BUFF_FF     0x0080
-#  define STATUS_APPL_BUFF_FE     0x0040
-#  define STATUS_RESP_CRC_ERR     0x0020
-#  define STATUS_CRC_READ_ERR     0x0008
-#  define STATUS_CRC_WRITE_ERR    0x0004
-#  define STATUS_TIME_OUT_RESP    0x0002
-#  define STATUS_TIME_OUT_READ    0x0001
-#  define STATUS_ERR_CMD_MASK     (STATUS_RESP_CRC_ERR | STATUS_TIME_OUT_RESP)
-#  define STATUS_ERR_DATA_MASK    (STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR | STATUS_TIME_OUT_READ)
-#  define STATUS_ERR_MASK         (STATUS_ERR_CMD_MASK | STATUS_ERR_DATA_MASK)
-
-#define SDHC_CLK_RATE     0x08
-
-#define SDHC_CMD_DAT_CTRL 0x0c /* CMD_DAT_CONT */
-#  define CMD_DAT_CTRL_CMD_RESUME        0x8000
-#  define CMD_DAT_CTRL_CMD_RESP_LONG_OFF 0x1000
-#  define CMD_DAT_CTRL_STOP_READ_WAIT    0x0800
-#  define CMD_DAT_CTRL_START_READ_WAIT   0x0400
-#  define CMD_DAT_CTRL_BUS_WIDTH_4       0x0200
-#  define CMD_DAT_CTRL_INIT              0x0080
-#  define CMD_DAT_CTRL_WRITE             0x0010
-#  define CMD_DAT_CTRL_DATA_ENABLE       0x0008
-#  define CMD_DAT_CTRL_RESP_NONE         0x0000
-#  define CMD_DAT_CTRL_RESP_R1_R5_R6     0x0001
-#  define CMD_DAT_CTRL_RESP_R2           0x0002
-#  define CMD_DAT_CTRL_RESP_R3_R4        0x0003
-
-#define SDHC_RES_TO       0x10
-
-#define SDHC_READ_TO      0x14
-#  define READ_TO_RECOMMENDED 0x2db4
-
-#define SDHC_BLK_LEN      0x18
-
-#define SDHC_NOB          0x1c
-
-#define SDHC_REV_NO       0x20
-
-#define SDHC_INT_CTRL     0x24 /* INT_CNTR */
-#  define INT_CTRL_CARD_INSERTION_EN 0x8000
-#  define INT_CTRL_SDIO_REMOVAL_EN   0x4000
-#  define INT_CTRL_SDIO_IRQ_EN       0x2000
-#  define INT_CTRL_DAT0_EN           0x1000
-#  define INT_CTRL_BUF_READ_EN       0x0010
-#  define INT_CTRL_BUF_WRITE_EN      0x0008
-#  define INT_CTRL_END_CMD_RES       0x0004
-#  define INT_CTRL_WRITE_OP_DONE     0x0002
-#  define INT_CTRL_READ_OP_DONE      0x0001
-#  define INT_CTRL_INT_EN_MASK       0xe01f
-
-#define SDHC_CMD          0x28
-
-#define SDHC_ARG          0x2c
-
-#define SDHC_RES_FIFO     0x34
-
-#define SDHC_BUFFER_ACCESS 0x38
-
-#endif /* #ifndef _SLOT_IMX27_H */
diff --git a/drivers/staging/csr/sdioemb/slot_imx31.h b/drivers/staging/csr/sdioemb/slot_imx31.h
deleted file mode 100644
index b11894a4baec..000000000000
--- a/drivers/staging/csr/sdioemb/slot_imx31.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * i.MX31 SDHC definitions.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- */
-#ifndef _SLOT_IMX31_H
-#define _SLOT_IMX31_H
-
-/*
- * i.MX31 SDHC registers.
- */
-
-#define SDHC_STR_STP_CLK  0x00
-#  define STR_STP_CLK_MMCSD_RESET 0x0008
-#  define STR_STP_CLK_START_CLK   0x0002
-#  define STR_STP_CLK_STOP_CLK    0x0001
-
-#define SDHC_STATUS       0x04
-#  define STATUS_CARD_PRESENCE    0x8000
-#  define STATUS_SDIO_INT_ACTIVE  0x4000
-#  define STATUS_END_CMD_RESP     0x2000
-#  define STATUS_WRITE_OP_DONE    0x1000
-#  define STATUS_READ_OP_DONE     0x0800
-#  define STATUS_CARD_BUS_CLK_RUN 0x0100
-#  define STATUS_APPL_BUFF_FF     0x0080
-#  define STATUS_APPL_BUFF_FE     0x0040
-#  define STATUS_RESP_CRC_ERR     0x0020
-#  define STATUS_CRC_READ_ERR     0x0008
-#  define STATUS_CRC_WRITE_ERR    0x0004
-#  define STATUS_TIME_OUT_RESP    0x0002
-#  define STATUS_TIME_OUT_READ    0x0001
-#  define STATUS_ERR_CMD_MASK     (STATUS_RESP_CRC_ERR | STATUS_TIME_OUT_RESP)
-#  define STATUS_ERR_DATA_MASK    (STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR | STATUS_TIME_OUT_READ)
-#  define STATUS_ERR_MASK         (STATUS_ERR_CMD_MASK | STATUS_ERR_DATA_MASK)
-
-#define SDHC_CLK_RATE     0x08
-
-#define SDHC_CMD_DAT_CTRL 0x0c /* CMD_DAT_CONT */
-#  define CMD_DAT_CTRL_CMD_RESUME        0x8000
-#  define CMD_DAT_CTRL_CMD_RESP_LONG_OFF 0x1000
-#  define CMD_DAT_CTRL_STOP_READ_WAIT    0x0800
-#  define CMD_DAT_CTRL_START_READ_WAIT   0x0400
-#  define CMD_DAT_CTRL_BUS_WIDTH_4       0x0200
-#  define CMD_DAT_CTRL_INIT              0x0080
-#  define CMD_DAT_CTRL_WRITE             0x0010
-#  define CMD_DAT_CTRL_DATA_ENABLE       0x0008
-#  define CMD_DAT_CTRL_RESP_NONE         0x0000
-#  define CMD_DAT_CTRL_RESP_R1_R5_R6     0x0001
-#  define CMD_DAT_CTRL_RESP_R2           0x0002
-#  define CMD_DAT_CTRL_RESP_R3_R4        0x0003
-
-#define SDHC_RES_TO       0x10
-
-#define SDHC_READ_TO      0x14
-#  define READ_TO_RECOMMENDED 0x2db4
-
-#define SDHC_BLK_LEN      0x18
-
-#define SDHC_NOB          0x1c
-
-#define SDHC_REV_NO       0x20
-
-#define SDHC_INT_CTRL     0x24 /* INT_CNTR */
-#  define INT_CTRL_CARD_INSERTION_EN 0x8000
-#  define INT_CTRL_SDIO_REMOVAL_EN   0x4000
-#  define INT_CTRL_SDIO_IRQ_EN       0x2000
-#  define INT_CTRL_DAT0_EN           0x1000
-#  define INT_CTRL_BUF_READ_EN       0x0010
-#  define INT_CTRL_BUF_WRITE_EN      0x0008
-#  define INT_CTRL_END_CMD_RES       0x0004
-#  define INT_CTRL_WRITE_OP_DONE     0x0002
-#  define INT_CTRL_READ_OP_DONE      0x0001
-#  define INT_CTRL_INT_EN_MASK       0xe01f
-
-#define SDHC_CMD          0x28
-
-#define SDHC_ARG          0x2c
-
-#define SDHC_RES_FIFO     0x34
-
-#define SDHC_BUFFER_ACCESS 0x38
-
-#endif /* #ifndef _SLOT_IMX31_H */
diff --git a/drivers/staging/csr/sdioemb/slot_pxa27x.h b/drivers/staging/csr/sdioemb/slot_pxa27x.h
deleted file mode 100644
index cca853ad0e05..000000000000
--- a/drivers/staging/csr/sdioemb/slot_pxa27x.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * PXA27x MMC/SD controller definitions.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- */
-#ifndef _SLOT_PXA27X_H
-#define _SLOT_PXA27X_H
-
-#define PXA27X_MMC_MMCLK_BASE_FREQ 19500000
-#define PXA27X_MMC_FIFO_SIZE 32
-
-#define STOP_CLOCK              (1 << 0)
-#define START_CLOCK             (2 << 0)
-
-#define STAT_END_CMD_RES                (1 << 13)
-#define STAT_PRG_DONE                   (1 << 12)
-#define STAT_DATA_TRAN_DONE             (1 << 11)
-#define STAT_CLK_EN                     (1 << 8)
-#define STAT_RECV_FIFO_FULL             (1 << 7)
-#define STAT_XMIT_FIFO_EMPTY            (1 << 6)
-#define STAT_RES_CRC_ERR                (1 << 5)
-#define STAT_SPI_READ_ERROR_TOKEN       (1 << 4)
-#define STAT_CRC_READ_ERROR             (1 << 3)
-#define STAT_CRC_WRITE_ERROR            (1 << 2)
-#define STAT_TIME_OUT_RESPONSE          (1 << 1)
-#define STAT_READ_TIME_OUT              (1 << 0)
-
-#define SPI_CS_ADDRESS          (1 << 3)
-#define SPI_CS_EN               (1 << 2)
-#define CRC_ON                  (1 << 1)
-#define SPI_EN                  (1 << 0)
-
-#define CMDAT_SDIO_INT_EN       (1 << 11)
-#define CMDAT_STOP_TRAN         (1 << 10)
-#define CMDAT_SD_4DAT           (1 << 8)
-#define CMDAT_DMAEN             (1 << 7)
-#define CMDAT_INIT              (1 << 6)
-#define CMDAT_BUSY              (1 << 5)
-#define CMDAT_STREAM            (1 << 4)        /* 1 = stream */
-#define CMDAT_WRITE             (1 << 3)        /* 1 = write */
-#define CMDAT_DATAEN            (1 << 2)
-#define CMDAT_RESP_NONE         (0 << 0)
-#define CMDAT_RESP_SHORT        (1 << 0)
-#define CMDAT_RESP_R2           (2 << 0)
-#define CMDAT_RESP_R3           (3 << 0)
-
-#define RDTO_MAX                0xffff
-
-#define BUF_PART_FULL           (1 << 0)
-
-#define SDIO_SUSPEND_ACK        (1 << 12)
-#define SDIO_INT                (1 << 11)
-#define RD_STALLED              (1 << 10)
-#define RES_ERR                 (1 << 9)
-#define DAT_ERR                 (1 << 8)
-#define TINT                    (1 << 7)
-#define TXFIFO_WR_REQ           (1 << 6)
-#define RXFIFO_RD_REQ           (1 << 5)
-#define CLK_IS_OFF              (1 << 4)
-#define STOP_CMD                (1 << 3)
-#define END_CMD_RES             (1 << 2)
-#define PRG_DONE                (1 << 1)
-#define DATA_TRAN_DONE          (1 << 0)
-
-#define MMC_I_MASK_ALL          0x00001fff
-
-#endif /* #ifndef _SLOT_PXA27X_H */
diff --git a/drivers/staging/csr/sdioemb/slot_shc.h b/drivers/staging/csr/sdioemb/slot_shc.h
deleted file mode 100644
index 0eb5e535a5a2..000000000000
--- a/drivers/staging/csr/sdioemb/slot_shc.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * Standard Host Controller definitions.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- */
-#ifndef _SLOT_SHC_H
-#define _SLOT_SHC_H
-
-#include <oska/io.h>
-
-/* SHC registers */
-#define SHC_SYSTEM_ADDRESS  0x00
-
-#define SHC_BLOCK_SIZE      0x04
-#  define SHC_BLOCK_SIZE_DMA_BOUNDARY_4K   (0x0 << 12)
-#  define SHC_BLOCK_SIZE_DMA_BOUNDARY_512K (0x7 << 12)
-
-#define SHC_BLOCK_COUNT     0x06
-#define SHC_ARG             0x08
-
-#define SHC_TRANSFER_MODE   0x0c
-#  define SHC_TRANSFER_MODE_DMA_EN        0x0001
-#  define SHC_TRANSFER_MODE_BLK_CNT_EN    0x0002
-#  define SHC_TRANSFER_MODE_AUTO_CMD12_EN 0x0004
-#  define SHC_TRANSFER_MODE_DATA_READ     0x0010
-#  define SHC_TRANSFER_MODE_MULTI_BLK     0x0020
-
-#define SHC_CMD             0x0e
-#  define SHC_CMD_RESP_NONE     0x0000
-#  define SHC_CMD_RESP_136      0x0001
-#  define SHC_CMD_RESP_48       0x0002
-#  define SHC_CMD_RESP_48B      0x0003
-#  define SHC_CMD_RESP_CRC_CHK  0x0008
-#  define SHC_CMD_RESP_IDX_CHK  0x0010
-#  define SHC_CMD_DATA_PRESENT  0x0020
-#  define SHC_CMD_TYPE_ABORT    (0x3 << 6)
-#  define SHC_CMD_IDX(c)        ((c) << 8)
-
-#define SHC_RESPONSE_0_31   0x10
-
-#define SHC_BUFFER_DATA_PORT    0x20
-
-#define SHC_PRESENT_STATE       0x24
-#  define SHC_PRESENT_STATE_CMD_INHIBIT     0x00000001
-#  define SHC_PRESENT_STATE_DAT_INHIBIT     0x00000002
-#  define SHC_PRESENT_STATE_CARD_PRESENT    0x00010000
-
-#define SHC_HOST_CTRL           0x28
-#  define SHC_HOST_CTRL_LED_ON          0x01
-#  define SHC_HOST_CTRL_4BIT            0x02
-#  define SHC_HOST_CTRL_HIGH_SPD_EN     0x04
-
-
-#define SHC_PWR_CTRL        0x29
-#  define SHC_PWR_CTRL_3V3      0x0e
-#  define SHC_PWR_CTRL_ON       0x01
-
-#define SHC_BLOCK_GAP_CTRL  0x2a
-#define SHC_WAKEUP_CTRL     0x2b
-
-#define SHC_CLOCK_CTRL      0x2c
-#  define SHC_CLOCK_CTRL_INT_CLK_EN     0x01
-#  define SHC_CLOCK_CTRL_INT_CLK_STABLE 0x02
-#  define SHC_CLOCK_CTRL_SD_CLK_EN      0x04
-#  define SHC_CLOCK_CTRL_DIV(d)         (((d) >> 1) << 8) /* divisor must be power of 2 */
-
-#define SHC_TIMEOUT_CTRL    0x2e
-#  define SHC_TIMEOUT_CTRL_MAX          0x0e
-
-#define SHC_SOFTWARE_RST    0x2f
-#  define SHC_SOFTWARE_RST_ALL 0x01
-#  define SHC_SOFTWARE_RST_CMD 0x02
-#  define SHC_SOFTWARE_RST_DAT 0x04
-
-#define SHC_INT_STATUS      0x30
-#define SHC_INT_STATUS_EN   0x34
-#define SHC_INT_SIGNAL_EN   0x38
-#  define SHC_INT_CMD_COMPLETE      0x00000001
-#  define SHC_INT_TRANSFER_COMPLETE 0x00000002
-#  define SHC_INT_BLOCK_GAP         0x00000004
-#  define SHC_INT_DMA               0x00000008
-#  define SHC_INT_WR_BUF_RDY        0x00000010
-#  define SHC_INT_RD_BUF_RDY        0x00000020
-#  define SHC_INT_CARD_INSERTED     0x00000040
-#  define SHC_INT_CARD_REMOVED      0x00000080
-#  define SHC_INT_CARD_INT          0x00000100
-#  define SHC_INT_ERR_ANY           0x00008000
-#  define SHC_INT_ERR_CMD_TIMEOUT   0x00010000
-#  define SHC_INT_ERR_CMD_CRC       0x00020000
-#  define SHC_INT_ERR_CMD_ENDBIT    0x00040000
-#  define SHC_INT_ERR_CMD_INDEX     0x00080000
-#  define SHC_INT_ERR_CMD_ALL       0x000f0000
-#  define SHC_INT_ERR_DAT_TIMEOUT   0x00100000
-#  define SHC_INT_ERR_DAT_CRC       0x00200000
-#  define SHC_INT_ERR_DAT_ENDBIT    0x00400000
-#  define SHC_INT_ERR_DAT_ALL       0x00700000
-#  define SHC_INT_ERR_CURRENT_LIMIT 0x00800000
-#  define SHC_INT_ERR_AUTO_CMD12    0x01000000
-#  define SHC_INT_ERR_ALL           0x01ff0000
-#  define SHC_INT_ALL               0x01ff81ff
-
-#define SHC_AUTO_CMD12_STATUS   0x3c
-
-#define SHC_CAPS                0x40
-#  define SHC_CAPS_TO_BASE_CLK_FREQ(c)  (((c) & 0x00003f00) >> 8)
-#  define SHC_CAPS_PWR_3V3              (1 << 24)
-
-#define SHC_MAX_CURRENT_CAPS    0x4c
-
-/* PCI configuration registers. */
-#define PCI_SHC_SLOT_INFO 0x40
-
-/* Maximum time to wait for a software reset. */
-#define SHC_RESET_TIMEOUT_MS 100 /* ms */
-
-/* Maximum time to wait for internal clock to stabilize */
-#define SHC_INT_CLK_STABLE_TIMEOUT_MS 100
-
-/*
- * No supported voltages in the capabilities register.
- *
- * Workaround: Assume 3.3V is supported.
- */
-#define SLOT_SHC_QUIRK_NO_VOLTAGE_CAPS (1 << 0)
-
-/*
- * Commands with an R5B (busy) response do not complete.
- *
- * Workaround: Use R5 instead. This will only work if the busy signal
- * is cleared sufficiently quickly before the next command is started.
- */
-#define SLOT_SHC_QUIRK_R5B_BROKEN      (1 << 1)
-
-/*
- * High speed mode doesn't work.
- *
- * Workaround: limit maximum bus frequency to 25 MHz.
- */
-#define SLOT_SHC_QUIRK_HIGH_SPD_BROKEN (1 << 2)
-
-/*
- * Data timeout (TIMEOUT_CTRL) uses SDCLK and not TMCLK.
- *
- * Workaround: set TIMEOUT_CTRL using SDCLK.
- */
-#define SLOT_SHC_QUIRK_DATA_TIMEOUT_USES_SDCLK (1 << 3)
-
-/*
- * Controller can only start DMA on dword (32 bit) aligned addresses.
- *
- * Workaround: PIO is used on data transfers with a non-dword aligned
- * address.
- */
-#define SHC_QUIRK_DMA_NEEDS_DWORD_ALIGNED_ADDR (1 << 4)
-
-/*
- * Controller is unreliable following multiple transfers
- *
- * Workaround: The controller is reset following every command, not just
- * erroneous ones
- */
-#define SHC_QUIRK_RESET_EVERY_CMD_COMPLETE (1 << 5)
-
-/*
- * JMicron JMB381 to JMB385 controllers require some non-standard PCI
- * config space writes.
- */
-#define SHC_QUIRK_JMICRON_JMB38X (1 << 6)
-
-/*
- * Controller can only do DMA if the length is a whole number of
- * dwords.
- *
- * Controller with this quirk probably also need
- * SHC_QUIRK_DMA_NEEDS_DWORD_ALIGNED_ADDR.
- *
- * Workaround: PIO is used on data transfers that don't end on an
- * aligned address.
- */
-#define SHC_QUIRK_DMA_NEEDS_DWORD_ALIGNED_LEN (1 << 7)
-
-struct sdioemb_shc {
-    struct sdioemb_slot *slot;
-    void (*enable_int)(struct sdioemb_slot *slot, uint32_t ints);
-    void (*disable_int)(struct sdioemb_slot *slot, uint32_t ints);
-    void (*cmd_complete)(struct sdioemb_slot *slot, struct sdioemb_cmd *cmd);
-    uint32_t quirks;
-    os_io_mem_t addr;
-
-    os_spinlock_t lock;
-    os_timer_t lockup_timer;
-    uint32_t base_clk;
-    struct sdioemb_cmd *current_cmd;
-    uint8_t *data;
-    size_t remaining;
-    size_t block_size;
-};
-
-void sdioemb_shc_init(struct sdioemb_shc *shc);
-void sdioemb_shc_clean_up(struct sdioemb_shc *shc);
-
-int sdioemb_shc_start(struct sdioemb_shc *shc);
-void sdioemb_shc_stop(struct sdioemb_shc *shc);
-
-bool sdioemb_shc_isr(struct sdioemb_shc *shc, uint32_t *int_stat);
-void sdioemb_shc_dsr(struct sdioemb_shc *shc, uint32_t int_stat);
-
-int sdioemb_shc_set_bus_freq(struct sdioemb_shc *shc, int clk);
-int sdioemb_shc_set_bus_width(struct sdioemb_shc *shc, int bus_width);
-int sdioemb_shc_start_cmd(struct sdioemb_shc *shc, struct sdioemb_cmd *cmd,
-                          bool use_dma, uint64_t dma_addr);
-int sdioemb_shc_card_present(struct sdioemb_shc *shc);
-int sdioemb_shc_card_power(struct sdioemb_shc *shc, enum sdioemb_power power);
-void sdioemb_shc_enable_card_int(struct sdioemb_shc *shc);
-void sdioemb_shc_disable_card_int(struct sdioemb_shc *shc);
-int sdioemb_shc_hard_reset(struct sdioemb_shc *shc);
-
-void sdioemb_shc_show_quirks(struct sdioemb_shc *shc);
-
-#endif /* #ifndef _SLOT_SHC_H */
diff --git a/drivers/staging/csr/sdioemb/slot_ushc.h b/drivers/staging/csr/sdioemb/slot_ushc.h
deleted file mode 100644
index efe3310ee37c..000000000000
--- a/drivers/staging/csr/sdioemb/slot_ushc.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * USB Standard Host Controller definitions.
- *
- * Copyright (C) 2010 Cambridge Silicon Radio Ltd.
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- */
-#ifndef _SLOT_USHC_H
-#define _SLOT_USHC_H
-
-#include <oska/io.h>
-
-enum ushc_request
-{
-    USHC_GET_CAPS  = 0x00,
-    USHC_HOST_CTRL = 0x01,
-    USHC_PWR_CTRL  = 0x02,
-    USHC_CLK_FREQ  = 0x03,
-    USHC_EXEC_CMD  = 0x04,
-    USHC_READ_RESP = 0x05,
-    USHC_RESET     = 0x06
-};
-
-enum ushc_request_recipient
-{
-    USHC_RECIPIENT_DEVICE = 0x00,
-    USHC_RECIPIENT_INTERFACE = 0x01,
-    USHC_RECIPIENT_ENDPOINT = 0x02,
-    USHC_RECIPIENT_OTHER = 0x03
-};
-
-enum ushc_request_direction
-{
-    USHC_HOST_TO_DEVICE = 0x00,
-    USHC_DEVICE_TO_HOST = 0x01
-};
-
-struct sdioemb_ushc
-{
-    struct sdioemb_slot *slot;
-
-    void (*enable_int)(struct sdioemb_slot *slot, uint32_t ints);
-    void (*disable_int)(struct sdioemb_slot *slot, uint32_t ints);
-    void (*cmd_complete)(struct sdioemb_slot *slot, struct sdioemb_cmd *cmd);
-    int  (*set_host_ctrl)(struct sdioemb_slot *slot, uint16_t controler_state);
-    int  (*submit_vendor_request)(struct sdioemb_slot *slot,
-                                  enum ushc_request request,
-                                  enum ushc_request_direction direction,
-                                  enum ushc_request_recipient recipient,
-                                  uint16_t value,
-                                  uint16_t index,
-                                  void* io_buffer,
-                                  uint32_t io_buffer_length);
-    int  (*submit_cbw_request)(struct sdioemb_slot *slot, uint8_t cmd_index, uint16_t block_size, uint32_t cmd_arg);
-    int  (*submit_data_request)(struct sdioemb_slot *slot,
-                                enum ushc_request_direction direction,
-                                void* request_buffer,
-                                uint32_t request_buffer_length);
-    int  (*submit_csw_request)(struct sdioemb_slot *slot);
-
-    os_spinlock_t lock;
-
-    uint32_t base_clock;
-    uint32_t controler_capabilities;
-    uint16_t controler_state;
-    struct sdioemb_cmd* current_cmd;
-
-#define DISCONNECTED    0
-#define INT_EN          1
-#define IGNORE_NEXT_INT 2
-#define STOP            4
-    uint32_t flags;
-
-#define USHC_INT_STATUS_SDIO_INT     (1 << 1)
-#define USHC_INT_STATUS_CARD_PRESENT (1 << 0)
-    uint8_t interrupt_status;
-
-    size_t block_size;
-};
-
-#define USHC_GET_CAPS_VERSION_MASK 0xff
-#define USHC_GET_CAPS_3V3      (1 << 8)
-#define USHC_GET_CAPS_3V0      (1 << 9)
-#define USHC_GET_CAPS_1V8      (1 << 10)
-#define USHC_GET_CAPS_HIGH_SPD (1 << 16)
-
-#define USHC_PWR_CTRL_OFF 0x00
-#define USHC_PWR_CTRL_3V3 0x01
-#define USHC_PWR_CTRL_3V0 0x02
-#define USHC_PWR_CTRL_1V8 0x03
-
-#define USHC_HOST_CTRL_4BIT     (1 << 1)
-#define USHC_HOST_CTRL_HIGH_SPD (1 << 0)
-
-#define USHC_READ_RESP_BUSY        (1 << 4)
-#define USHC_READ_RESP_ERR_TIMEOUT (1 << 3)
-#define USHC_READ_RESP_ERR_CRC     (1 << 2)
-#define USHC_READ_RESP_ERR_DAT     (1 << 1)
-#define USHC_READ_RESP_ERR_CMD     (1 << 0)
-#define USHC_READ_RESP_ERR_MASK    0x0f
-
-void sdioemb_ushc_init(struct sdioemb_ushc* ushc);
-void sdioemb_ushc_clean_up(struct sdioemb_ushc* ushc);
-
-int sdioemb_ushc_start(struct sdioemb_ushc* ushc);
-void sdioemb_ushc_stop(struct sdioemb_ushc* ushc);
-
-bool sdioemb_ushc_isr(struct sdioemb_ushc* ushc, uint8_t int_stat);
-
-int sdioemb_ushc_set_bus_freq(struct sdioemb_ushc* ushc, int clk);
-int sdioemb_ushc_set_bus_width(struct sdioemb_ushc* ushc, int bus_width);
-int sdioemb_ushc_start_cmd(struct sdioemb_ushc* ushc, struct sdioemb_cmd *cmd);
-int sdioemb_ushc_card_present(struct sdioemb_ushc* ushc);
-int sdioemb_ushc_card_power(struct sdioemb_ushc* ushc, enum sdioemb_power power);
-void sdioemb_ushc_enable_card_int(struct sdioemb_ushc* ushc);
-void sdioemb_ushc_disable_card_int(struct sdioemb_ushc* ushc);
-int sdioemb_ushc_hard_reset(struct sdioemb_ushc* ushc);
-
-void sdioemb_ushc_command_complete(struct sdioemb_ushc* ushc, uint8_t status, uint32_t respones);
-
-int ushc_hw_get_caps(struct sdioemb_ushc* ushc);
-static int ushc_hw_set_host_ctrl(struct sdioemb_ushc* ushc, uint16_t mask, uint16_t val);
-static int ushc_hw_submit_vendor_request(struct sdioemb_ushc* ushc,
-                                       enum ushc_request request,
-                                       enum ushc_request_recipient recipient,
-                                       enum ushc_request_direction direction,
-                                       uint16_t value,
-                                       uint16_t index,
-                                       void* io_buffer,
-                                       uint32_t io_buffer_length);
-
-#endif
diff --git a/drivers/staging/csr/sdioemb/trace.h b/drivers/staging/csr/sdioemb/trace.h
deleted file mode 100644
index 57cbb010eced..000000000000
--- a/drivers/staging/csr/sdioemb/trace.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Sdioemb trace messages.
- *
- * Copyright (C) 2009 Cambridge Silicon Radio Ltd.
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- */
-
-#ifndef SDIOEMB_TRACE_H
-#define SDIOEMB_TRACE_H
-
-#if defined(__linux__)
-#  define OS_TRACE_PREFIX "sdioemb: "
-#endif
-
-#include <oska/trace.h>
-
-#endif /* #ifndef SDIOEMB_TRACE_H */
diff --git a/drivers/staging/csr/sdioemb/uif.h b/drivers/staging/csr/sdioemb/uif.h
deleted file mode 100644
index c09357fd2fbc..000000000000
--- a/drivers/staging/csr/sdioemb/uif.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Userspace interface to the SDIO Userspace Interface driver.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * Refer to LICENSE.txt included with this source code for details on
- * the license terms.
- */
-#ifndef LINUX_SDIOEMB_UIF_H
-#define LINUX_SDIOEMB_UIF_H
-
-enum sdioemb_uif_cmd_type {
-    SDIOEMB_UIF_CMD52_READ, SDIOEMB_UIF_CMD52_WRITE,
-    SDIOEMB_UIF_CMD53_READ, SDIOEMB_UIF_CMD53_WRITE,
-};
-
-struct sdioemb_uif_cmd {
-    enum sdioemb_uif_cmd_type type;
-    int                    function;
-    uint32_t               address;
-    uint8_t *              data;
-    size_t                 len;
-    int                    block_size;
-};
-
-#define SDIOEMB_UIF_IOC_MAGIC 's'
-
-#define SDIOEMB_UIF_IOCQNUMFUNCS  _IO(SDIOEMB_UIF_IOC_MAGIC,   0)
-#define SDIOEMB_UIF_IOCCMD        _IOWR(SDIOEMB_UIF_IOC_MAGIC, 1, struct sdioemb_uif_cmd)
-#define SDIOEMB_UIF_IOCWAITFORINT _IO(SDIOEMB_UIF_IOC_MAGIC,   2)
-#define SDIOEMB_UIF_IOCTBUSWIDTH  _IO(SDIOEMB_UIF_IOC_MAGIC,   3)
-#define SDIOEMB_UIF_IOCREINSERT   _IO(SDIOEMB_UIF_IOC_MAGIC,   4)
-#define SDIOEMB_UIF_IOCTBUSFREQ   _IO(SDIOEMB_UIF_IOC_MAGIC,   5)
-#define SDIOEMB_UIF_IOCQMANFID    _IO(SDIOEMB_UIF_IOC_MAGIC,   6)
-#define SDIOEMB_UIF_IOCQCARDID    _IO(SDIOEMB_UIF_IOC_MAGIC,   7)
-#define SDIOEMB_UIF_IOCQSTDIF     _IO(SDIOEMB_UIF_IOC_MAGIC,   8)
-#define SDIOEMB_UIF_IOCQMAXBLKSZ  _IO(SDIOEMB_UIF_IOC_MAGIC,   9)
-#define SDIOEMB_UIF_IOCQBLKSZ     _IO(SDIOEMB_UIF_IOC_MAGIC,  10)
-#define SDIOEMB_UIF_IOCTBLKSZ     _IO(SDIOEMB_UIF_IOC_MAGIC,  11)
-
-#endif /* #ifndef LINUX_SDIOEMB_UIF_H */
diff --git a/drivers/staging/csr/sdioemb/version.h b/drivers/staging/csr/sdioemb/version.h
deleted file mode 100644
index b88ef6e4ec9f..000000000000
--- a/drivers/staging/csr/sdioemb/version.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* Autogenerated by the sdioemb release procedure. */
-#ifndef SDIOEMB_VERSION_H
-#define SDIOEMB_VERSION_H
-
-#define SDIOEMB_RELEASE 31
-
-#ifndef SDIOEMB_RELEASE_EXTRA
-#define SDIOEMB_RELEASE_EXTRA ""
-#endif
-
-#endif /* #ifndef SDIOEMB_VERSION_H */
author	Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2012-07-20 11:21:41 -0700
committer	Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2012-07-20 11:21:41 -0700
commit	22c45f0b3502ddd48637b4b2f65036fbe0868622 (patch)
tree	5d0820b73eb5acfe8626288da2cf2ce56cd1c7c8 /drivers/staging/csr
parent	db03f1d2cb5f99dd8bd33d68c28f67b43c67545a (diff)
download	linux-22c45f0b3502ddd48637b4b2f65036fbe0868622.tar.bz2