Merge remote-tracking branch 'spi/for-5.14' into spi-linus

3 files changed, 18 insertions, 14 deletions

diff --git a/drivers/spi/spi-coldfire-qspi.c b/drivers/spi/spi-coldfire-qspi.c
index 8996115ce736..263ce9047327 100644
--- a/drivers/spi/spi-coldfire-qspi.c
+++ b/drivers/spi/spi-coldfire-qspi.c
@@ -444,7 +444,7 @@ static int mcfqspi_remove(struct platform_device *pdev)
 	mcfqspi_wr_qmr(mcfqspi, MCFQSPI_QMR_MSTR);
 
 	mcfqspi_cs_teardown(mcfqspi);
-	clk_disable(mcfqspi->clk);
+	clk_disable_unprepare(mcfqspi->clk);
 
 	return 0;
 }
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index e114e6fe5ea5..d112c2cac042 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -213,12 +213,6 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value)
 	 * line for the controller
 	 */
 	if (spi->cs_gpiod) {
-		/*
-		 * FIXME: is this code ever executed? This host does not
-		 * set SPI_MASTER_GPIO_SS so this chipselect callback should
-		 * not get called from the SPI core when we are using
-		 * GPIOs for chip select.
-		 */
 		if (value == BITBANG_CS_ACTIVE)
 			gpiod_set_value(spi->cs_gpiod, 1);
 		else
@@ -945,7 +939,7 @@ static int davinci_spi_probe(struct platform_device *pdev)
 	master->bus_num = pdev->id;
 	master->num_chipselect = pdata->num_chipselect;
 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16);
-	master->flags = SPI_MASTER_MUST_RX;
+	master->flags = SPI_MASTER_MUST_RX | SPI_MASTER_GPIO_SS;
 	master->setup = davinci_spi_setup;
 	master->cleanup = davinci_spi_cleanup;
 	master->can_dma = davinci_spi_can_dma;
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index 34b31aba3981..e8de3cbbfb2a 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -328,8 +328,16 @@ orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 static void orion_spi_set_cs(struct spi_device *spi, bool enable)
 {
 	struct orion_spi *orion_spi;
+	void __iomem *ctrl_reg;
+	u32 val;
 
 	orion_spi = spi_master_get_devdata(spi->master);
+	ctrl_reg = spi_reg(orion_spi, ORION_SPI_IF_CTRL_REG);
+
+	val = readl(ctrl_reg);
+
+	/* Clear existing chip-select and assertion state */
+	val &= ~(ORION_SPI_CS_MASK | 0x1);
 
 	/*
 	 * If this line is using a GPIO to control chip select, this internal
@@ -338,9 +346,7 @@ static void orion_spi_set_cs(struct spi_device *spi, bool enable)
 	 * as it is handled by a GPIO, but that doesn't matter. What we need
 	 * is to deassert the old chip select and assert some other chip select.
 	 */
-	orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, ORION_SPI_CS_MASK);
-	orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG,
-			  ORION_SPI_CS(spi->chip_select));
+	val |= ORION_SPI_CS(spi->chip_select);
 
 	/*
 	 * Chip select logic is inverted from spi_set_cs(). For lines using a
@@ -350,9 +356,13 @@ static void orion_spi_set_cs(struct spi_device *spi, bool enable)
 	 * doesn't matter.
 	 */
 	if (!enable)
-		orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1);
-	else
-		orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1);
+		val |= 0x1;
+
+	/*
+	 * To avoid toggling unwanted chip selects update the register
+	 * with a single write.
+	 */
+	writel(val, ctrl_reg);
 }
 
 static inline int orion_spi_wait_till_ready(struct orion_spi *orion_spi)