summaryrefslogtreecommitdiffstats
path: root/drivers/spi
diff options
context:
space:
mode:
authorAndrew Bresticker <abrestic@chromium.org>2015-04-06 14:29:03 -0700
committerMark Brown <broonie@kernel.org>2015-04-07 12:19:10 +0100
commit8543d0e72d4340001d756bd89bee70ce239e1ea5 (patch)
treed1541d6533e9ad0dafedc68787d46c38e8681009 /drivers/spi
parentc517d838eb7d07bbe9507871fab3931deccff539 (diff)
downloadlinux-8543d0e72d4340001d756bd89bee70ce239e1ea5.tar.bz2
spi: img-spfi: Limit bit clock to 1/4th of input clock
Although the SPFI BITCLK divider supports a value of up to 255, only values up to 128 are usable. This results in a maximum possible bit clock rate of 1/4th the input clock rate. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/spi-img-spfi.c10
1 files changed, 5 insertions, 5 deletions
diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c
index c01567d53581..99a3f7c0c7ff 100644
--- a/drivers/spi/spi-img-spfi.c
+++ b/drivers/spi/spi-img-spfi.c
@@ -405,10 +405,10 @@ static void img_spfi_config(struct spi_master *master, struct spi_device *spi,
/*
* output = spfi_clk * (BITCLK / 512), where BITCLK must be a
- * power of 2 up to 256 (where 255 == 256 since BITCLK is 8 bits)
+ * power of 2 up to 128
*/
- div = DIV_ROUND_UP(master->max_speed_hz, xfer->speed_hz);
- div = clamp(512 / (1 << get_count_order(div)), 1, 255);
+ div = DIV_ROUND_UP(clk_get_rate(spfi->spfi_clk), xfer->speed_hz);
+ div = clamp(512 / (1 << get_count_order(div)), 1, 128);
val = spfi_readl(spfi, SPFI_DEVICE_PARAMETER(spi->chip_select));
val &= ~(SPFI_DEVICE_PARAMETER_BITCLK_MASK <<
@@ -587,8 +587,8 @@ static int img_spfi_probe(struct platform_device *pdev)
master->num_chipselect = 5;
master->dev.of_node = pdev->dev.of_node;
master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(8);
- master->max_speed_hz = clk_get_rate(spfi->spfi_clk);
- master->min_speed_hz = master->max_speed_hz / 512;
+ master->max_speed_hz = clk_get_rate(spfi->spfi_clk) / 4;
+ master->min_speed_hz = clk_get_rate(spfi->spfi_clk) / 512;
master->set_cs = img_spfi_set_cs;
master->transfer_one = img_spfi_transfer_one;