summaryrefslogtreecommitdiffstats
path: root/drivers/spi
diff options
context:
space:
mode:
authorTrent Piepho <tpiepho@impinj.com>2017-11-06 10:38:23 -0800
committerMark Brown <broonie@kernel.org>2017-11-07 11:20:19 +0100
commit8197f489f4c4398391746a377c10501076b05168 (patch)
treeb764cb0ab9ee903139777e7500b36de8f440a607 /drivers/spi
parent974488e4ce1ed0b39f2c711c13f523c5912128a1 (diff)
downloadlinux-8197f489f4c4398391746a377c10501076b05168.tar.bz2
spi: imx: Fix failure path leak on GPIO request error correctly
In commit 974488e4ce1e ("spi: imx: Fix failure path leak on GPIO request error"), spi_bitbang_start() was moved later in the probe sequence. But this doesn't work, as spi_bitbang_start() has to be called before requesting GPIOs because the GPIO data in the spi master is populated when the master is registed, and that doesn't happen until spi_bitbang_start() is called. The default only works if one uses one CS. So add a failure path call to spi_bitbang_stop() to fix the leak. CC: Shawn Guo <shawnguo@kernel.org> CC: Sascha Hauer <kernel@pengutronix.de> CC: Fabio Estevam <fabio.estevam@nxp.com> CC: Mark Brown <broonie@kernel.org> CC: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/spi-imx.c15
1 files changed, 8 insertions, 7 deletions
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 5ddd32ba2521..301cdb721bad 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1613,6 +1613,11 @@ static int spi_imx_probe(struct platform_device *pdev)
spi_imx->devtype_data->intctrl(spi_imx, 0);
master->dev.of_node = pdev->dev.of_node;
+ ret = spi_bitbang_start(&spi_imx->bitbang);
+ if (ret) {
+ dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
+ goto out_clk_put;
+ }
if (!spi_imx->slave_mode) {
if (!master->cs_gpios) {
@@ -1631,23 +1636,19 @@ static int spi_imx_probe(struct platform_device *pdev)
if (ret) {
dev_err(&pdev->dev, "Can't get CS GPIO %i\n",
master->cs_gpios[i]);
- goto out_clk_put;
+ goto out_spi_bitbang;
}
}
}
- ret = spi_bitbang_start(&spi_imx->bitbang);
- if (ret) {
- dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
- goto out_clk_put;
- }
-
dev_info(&pdev->dev, "probed\n");
clk_disable(spi_imx->clk_ipg);
clk_disable(spi_imx->clk_per);
return ret;
+out_spi_bitbang:
+ spi_bitbang_stop(&spi_imx->bitbang);
out_clk_put:
clk_disable_unprepare(spi_imx->clk_ipg);
out_put_per: