summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-pl022.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-03-21 10:32:00 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-03-21 10:32:00 -0700
commit5f0e685f316a1de6d3af8b23eaf46651faca32ab (patch)
treeaf1ed231b7fcfc65b146be59a0aee699aa9f6353 /drivers/spi/spi-pl022.c
parentf8974cb71310a05632aada76be6a27576d61e609 (diff)
parent87bf5ab82884c829366914aaa813cc8b07b9fe58 (diff)
downloadlinux-5f0e685f316a1de6d3af8b23eaf46651faca32ab.tar.bz2
Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6
Pull SPI changes for v3.4 from Grant Likely: "Mostly a bunch of new drivers and driver bug fixes; but this also includes a few patches that create a core message queue infrastructure for the spi subsystem instead of making each driver open code it." * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: (34 commits) spi/fsl-espi: Make sure pm is within 2..32 spi/fsl-espi: make the clock computation easier to read spi: sh-hspi: modify write/read method spi: sh-hspi: control spi clock more correctly spi: sh-hspi: convert to using core message queue spi: s3c64xx: Fix build spi: s3c64xx: remove unnecessary callback msg->complete spi: remove redundant variable assignment spi: release lock on error path in spi_pump_messages() spi: Compatibility with direction which is used in samsung DMA operation spi-topcliff-pch: add recovery processing in case wait-event timeout spi-topcliff-pch: supports a spi mode setup and bit order setup by IO control spi-topcliff-pch: Fix issue for transmitting over 4KByte spi-topcliff-pch: Modify pci-bus number dynamically to get DMA device info spi/imx: simplify error handling to free gpios spi: Convert to DEFINE_PCI_DEVICE_TABLE spi: add Broadcom BCM63xx SPI controller driver SPI: add CSR SiRFprimaII SPI controller driver spi-topcliff-pch: fix -Wuninitialized warning spi: Mark spi_register_board_info() __devinit ...
Diffstat (limited to 'drivers/spi/spi-pl022.c')
-rw-r--r--drivers/spi/spi-pl022.c286
1 files changed, 57 insertions, 229 deletions
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index f37ad2271ad5..dc8485d1e883 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -29,7 +29,6 @@
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/spi/spi.h>
-#include <linux/workqueue.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/err.h>
@@ -330,12 +329,13 @@ struct vendor_data {
* @clk: outgoing clock "SPICLK" for the SPI bus
* @master: SPI framework hookup
* @master_info: controller-specific data from machine setup
- * @workqueue: a workqueue on which any spi_message request is queued
- * @pump_messages: work struct for scheduling work to the workqueue
+ * @kworker: thread struct for message pump
+ * @kworker_task: pointer to task for message pump kworker thread
+ * @pump_messages: work struct for scheduling work to the message pump
* @queue_lock: spinlock to syncronise access to message queue
* @queue: message queue
- * @busy: workqueue is busy
- * @running: workqueue is running
+ * @busy: message pump is busy
+ * @running: message pump is running
* @pump_transfers: Tasklet used in Interrupt Transfer mode
* @cur_msg: Pointer to current spi_message being processed
* @cur_transfer: Pointer to current spi_transfer
@@ -365,14 +365,7 @@ struct pl022 {
struct clk *clk;
struct spi_master *master;
struct pl022_ssp_controller *master_info;
- /* Driver message queue */
- struct workqueue_struct *workqueue;
- struct work_struct pump_messages;
- spinlock_t queue_lock;
- struct list_head queue;
- bool busy;
- bool running;
- /* Message transfer pump */
+ /* Message per-transfer pump */
struct tasklet_struct pump_transfers;
struct spi_message *cur_msg;
struct spi_transfer *cur_transfer;
@@ -394,6 +387,7 @@ struct pl022 {
struct sg_table sgt_rx;
struct sg_table sgt_tx;
char *dummypage;
+ bool dma_running;
#endif
};
@@ -448,8 +442,6 @@ static void null_cs_control(u32 command)
static void giveback(struct pl022 *pl022)
{
struct spi_transfer *last_transfer;
- unsigned long flags;
- struct spi_message *msg;
pl022->next_msg_cs_active = false;
last_transfer = list_entry(pl022->cur_msg->transfers.prev,
@@ -477,15 +469,8 @@ static void giveback(struct pl022 *pl022)
* sent the current message could be unloaded, which
* could invalidate the cs_control() callback...
*/
-
/* get a pointer to the next message, if any */
- spin_lock_irqsave(&pl022->queue_lock, flags);
- if (list_empty(&pl022->queue))
- next_msg = NULL;
- else
- next_msg = list_entry(pl022->queue.next,
- struct spi_message, queue);
- spin_unlock_irqrestore(&pl022->queue_lock, flags);
+ next_msg = spi_get_next_queued_message(pl022->master);
/*
* see if the next and current messages point
@@ -497,19 +482,13 @@ static void giveback(struct pl022 *pl022)
pl022->cur_chip->cs_control(SSP_CHIP_DESELECT);
else
pl022->next_msg_cs_active = true;
+
}
- spin_lock_irqsave(&pl022->queue_lock, flags);
- msg = pl022->cur_msg;
pl022->cur_msg = NULL;
pl022->cur_transfer = NULL;
pl022->cur_chip = NULL;
- queue_work(pl022->workqueue, &pl022->pump_messages);
- spin_unlock_irqrestore(&pl022->queue_lock, flags);
-
- msg->state = NULL;
- if (msg->complete)
- msg->complete(msg->context);
+ spi_finalize_current_message(pl022->master);
}
/**
@@ -1063,6 +1042,7 @@ static int configure_dma(struct pl022 *pl022)
dmaengine_submit(txdesc);
dma_async_issue_pending(rxchan);
dma_async_issue_pending(txchan);
+ pl022->dma_running = true;
return 0;
@@ -1141,11 +1121,12 @@ static void terminate_dma(struct pl022 *pl022)
dmaengine_terminate_all(rxchan);
dmaengine_terminate_all(txchan);
unmap_free_dma_scatter(pl022);
+ pl022->dma_running = false;
}
static void pl022_dma_remove(struct pl022 *pl022)
{
- if (pl022->busy)
+ if (pl022->dma_running)
terminate_dma(pl022);
if (pl022->dma_tx_channel)
dma_release_channel(pl022->dma_tx_channel);
@@ -1493,73 +1474,20 @@ out:
return;
}
-/**
- * pump_messages - Workqueue function which processes spi message queue
- * @data: pointer to private data of SSP driver
- *
- * This function checks if there is any spi message in the queue that
- * needs processing and delegate control to appropriate function
- * do_polling_transfer()/do_interrupt_dma_transfer()
- * based on the kind of the transfer
- *
- */
-static void pump_messages(struct work_struct *work)
+static int pl022_transfer_one_message(struct spi_master *master,
+ struct spi_message *msg)
{
- struct pl022 *pl022 =
- container_of(work, struct pl022, pump_messages);
- unsigned long flags;
- bool was_busy = false;
-
- /* Lock queue and check for queue work */
- spin_lock_irqsave(&pl022->queue_lock, flags);
- if (list_empty(&pl022->queue) || !pl022->running) {
- if (pl022->busy) {
- /* nothing more to do - disable spi/ssp and power off */
- writew((readw(SSP_CR1(pl022->virtbase)) &
- (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));
-
- if (pl022->master_info->autosuspend_delay > 0) {
- pm_runtime_mark_last_busy(&pl022->adev->dev);
- pm_runtime_put_autosuspend(&pl022->adev->dev);
- } else {
- pm_runtime_put(&pl022->adev->dev);
- }
- }
- pl022->busy = false;
- spin_unlock_irqrestore(&pl022->queue_lock, flags);
- return;
- }
-
- /* Make sure we are not already running a message */
- if (pl022->cur_msg) {
- spin_unlock_irqrestore(&pl022->queue_lock, flags);
- return;
- }
- /* Extract head of queue */
- pl022->cur_msg =
- list_entry(pl022->queue.next, struct spi_message, queue);
-
- list_del_init(&pl022->cur_msg->queue);
- if (pl022->busy)
- was_busy = true;
- else
- pl022->busy = true;
- spin_unlock_irqrestore(&pl022->queue_lock, flags);
+ struct pl022 *pl022 = spi_master_get_devdata(master);
/* Initial message state */
- pl022->cur_msg->state = STATE_START;
- pl022->cur_transfer = list_entry(pl022->cur_msg->transfers.next,
- struct spi_transfer, transfer_list);
+ pl022->cur_msg = msg;
+ msg->state = STATE_START;
+
+ pl022->cur_transfer = list_entry(msg->transfers.next,
+ struct spi_transfer, transfer_list);
/* Setup the SPI using the per chip configuration */
- pl022->cur_chip = spi_get_ctldata(pl022->cur_msg->spi);
- if (!was_busy)
- /*
- * We enable the core voltage and clocks here, then the clocks
- * and core will be disabled when this workqueue is run again
- * and there is no more work to be done.
- */
- pm_runtime_get_sync(&pl022->adev->dev);
+ pl022->cur_chip = spi_get_ctldata(msg->spi);
restore_state(pl022);
flush(pl022);
@@ -1568,95 +1496,37 @@ static void pump_messages(struct work_struct *work)
do_polling_transfer(pl022);
else
do_interrupt_dma_transfer(pl022);
-}
-
-static int __init init_queue(struct pl022 *pl022)
-{
- INIT_LIST_HEAD(&pl022->queue);
- spin_lock_init(&pl022->queue_lock);
-
- pl022->running = false;
- pl022->busy = false;
-
- tasklet_init(&pl022->pump_transfers, pump_transfers,
- (unsigned long)pl022);
-
- INIT_WORK(&pl022->pump_messages, pump_messages);
- pl022->workqueue = create_singlethread_workqueue(
- dev_name(pl022->master->dev.parent));
- if (pl022->workqueue == NULL)
- return -EBUSY;
return 0;
}
-static int start_queue(struct pl022 *pl022)
+static int pl022_prepare_transfer_hardware(struct spi_master *master)
{
- unsigned long flags;
-
- spin_lock_irqsave(&pl022->queue_lock, flags);
-
- if (pl022->running || pl022->busy) {
- spin_unlock_irqrestore(&pl022->queue_lock, flags);
- return -EBUSY;
- }
-
- pl022->running = true;
- pl022->cur_msg = NULL;
- pl022->cur_transfer = NULL;
- pl022->cur_chip = NULL;
- pl022->next_msg_cs_active = false;
- spin_unlock_irqrestore(&pl022->queue_lock, flags);
-
- queue_work(pl022->workqueue, &pl022->pump_messages);
+ struct pl022 *pl022 = spi_master_get_devdata(master);
+ /*
+ * Just make sure we have all we need to run the transfer by syncing
+ * with the runtime PM framework.
+ */
+ pm_runtime_get_sync(&pl022->adev->dev);
return 0;
}
-static int stop_queue(struct pl022 *pl022)
+static int pl022_unprepare_transfer_hardware(struct spi_master *master)
{
- unsigned long flags;
- unsigned limit = 500;
- int status = 0;
+ struct pl022 *pl022 = spi_master_get_devdata(master);
- spin_lock_irqsave(&pl022->queue_lock, flags);
+ /* nothing more to do - disable spi/ssp and power off */
+ writew((readw(SSP_CR1(pl022->virtbase)) &
+ (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));
- /* This is a bit lame, but is optimized for the common execution path.
- * A wait_queue on the pl022->busy could be used, but then the common
- * execution path (pump_messages) would be required to call wake_up or
- * friends on every SPI message. Do this instead */
- while ((!list_empty(&pl022->queue) || pl022->busy) && limit--) {
- spin_unlock_irqrestore(&pl022->queue_lock, flags);
- msleep(10);
- spin_lock_irqsave(&pl022->queue_lock, flags);
+ if (pl022->master_info->autosuspend_delay > 0) {
+ pm_runtime_mark_last_busy(&pl022->adev->dev);
+ pm_runtime_put_autosuspend(&pl022->adev->dev);
+ } else {
+ pm_runtime_put(&pl022->adev->dev);
}
- if (!list_empty(&pl022->queue) || pl022->busy)
- status = -EBUSY;
- else
- pl022->running = false;
-
- spin_unlock_irqrestore(&pl022->queue_lock, flags);
-
- return status;
-}
-
-static int destroy_queue(struct pl022 *pl022)
-{
- int status;
-
- status = stop_queue(pl022);
- /* we are unloading the module or failing to load (only two calls
- * to this routine), and neither call can handle a return value.
- * However, destroy_workqueue calls flush_workqueue, and that will
- * block until all work is done. If the reason that stop_queue
- * timed out is that the work will never finish, then it does no
- * good to call destroy_workqueue, so return anyway. */
- if (status != 0)
- return status;
-
- destroy_workqueue(pl022->workqueue);
-
return 0;
}
@@ -1776,38 +1646,6 @@ static int verify_controller_parameters(struct pl022 *pl022,
return 0;
}
-/**
- * pl022_transfer - transfer function registered to SPI master framework
- * @spi: spi device which is requesting transfer
- * @msg: spi message which is to handled is queued to driver queue
- *
- * This function is registered to the SPI framework for this SPI master
- * controller. It will queue the spi_message in the queue of driver if
- * the queue is not stopped and return.
- */
-static int pl022_transfer(struct spi_device *spi, struct spi_message *msg)
-{
- struct pl022 *pl022 = spi_master_get_devdata(spi->master);
- unsigned long flags;
-
- spin_lock_irqsave(&pl022->queue_lock, flags);
-
- if (!pl022->running) {
- spin_unlock_irqrestore(&pl022->queue_lock, flags);
- return -ESHUTDOWN;
- }
- msg->actual_length = 0;
- msg->status = -EINPROGRESS;
- msg->state = STATE_START;
-
- list_add_tail(&msg->queue, &pl022->queue);
- if (pl022->running && !pl022->busy)
- queue_work(pl022->workqueue, &pl022->pump_messages);
-
- spin_unlock_irqrestore(&pl022->queue_lock, flags);
- return 0;
-}
-
static inline u32 spi_rate(u32 rate, u16 cpsdvsr, u16 scr)
{
return rate / (cpsdvsr * (1 + scr));
@@ -2170,7 +2008,10 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
master->num_chipselect = platform_info->num_chipselect;
master->cleanup = pl022_cleanup;
master->setup = pl022_setup;
- master->transfer = pl022_transfer;
+ master->prepare_transfer_hardware = pl022_prepare_transfer_hardware;
+ master->transfer_one_message = pl022_transfer_one_message;
+ master->unprepare_transfer_hardware = pl022_unprepare_transfer_hardware;
+ master->rt = platform_info->rt;
/*
* Supports mode 0-3, loopback, and active low CS. Transfers are
@@ -2214,6 +2055,10 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
goto err_no_clk_en;
}
+ /* Initialize transfer pump */
+ tasklet_init(&pl022->pump_transfers, pump_transfers,
+ (unsigned long)pl022);
+
/* Disable SSP */
writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)),
SSP_CR1(pl022->virtbase));
@@ -2233,17 +2078,6 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
platform_info->enable_dma = 0;
}
- /* Initialize and start queue */
- status = init_queue(pl022);
- if (status != 0) {
- dev_err(&adev->dev, "probe - problem initializing queue\n");
- goto err_init_queue;
- }
- status = start_queue(pl022);
- if (status != 0) {
- dev_err(&adev->dev, "probe - problem starting queue\n");
- goto err_start_queue;
- }
/* Register with the SPI framework */
amba_set_drvdata(adev, pl022);
status = spi_register_master(master);
@@ -2269,9 +2103,6 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
return 0;
err_spi_register:
- err_start_queue:
- err_init_queue:
- destroy_queue(pl022);
if (platform_info->enable_dma)
pl022_dma_remove(pl022);
@@ -2307,9 +2138,6 @@ pl022_remove(struct amba_device *adev)
*/
pm_runtime_get_noresume(&adev->dev);
- /* Remove the queue */
- if (destroy_queue(pl022) != 0)
- dev_err(&adev->dev, "queue remove failed\n");
load_ssp_default_config(pl022);
if (pl022->master_info->enable_dma)
pl022_dma_remove(pl022);
@@ -2331,12 +2159,12 @@ pl022_remove(struct amba_device *adev)
static int pl022_suspend(struct device *dev)
{
struct pl022 *pl022 = dev_get_drvdata(dev);
- int status = 0;
+ int ret;
- status = stop_queue(pl022);
- if (status) {
- dev_warn(dev, "suspend cannot stop queue\n");
- return status;
+ ret = spi_master_suspend(pl022->master);
+ if (ret) {
+ dev_warn(dev, "cannot suspend master\n");
+ return ret;
}
dev_dbg(dev, "suspended\n");
@@ -2346,16 +2174,16 @@ static int pl022_suspend(struct device *dev)
static int pl022_resume(struct device *dev)
{
struct pl022 *pl022 = dev_get_drvdata(dev);
- int status = 0;
+ int ret;
/* Start the queue running */
- status = start_queue(pl022);
- if (status)
- dev_err(dev, "problem starting queue (%d)\n", status);
+ ret = spi_master_resume(pl022->master);
+ if (ret)
+ dev_err(dev, "problem starting queue (%d)\n", ret);
else
dev_dbg(dev, "resumed\n");
- return status;
+ return ret;
}
#endif /* CONFIG_PM */