summaryrefslogtreecommitdiffstats
path: root/drivers/soc/imx/imx8m-blk-ctrl.c
diff options
context:
space:
mode:
authorAdam Ford <aford173@gmail.com>2021-11-28 06:50:07 -0600
committerShawn Guo <shawnguo@kernel.org>2021-12-06 10:28:30 +0800
commit042b67799e2991e301df8269e166d8bc5944495e (patch)
tree06a81d3bf87f9956a97ca9a5d103c32cab17dbbc /drivers/soc/imx/imx8m-blk-ctrl.c
parent737e65c7956795b3553781fb7bc82fce1c39503f (diff)
downloadlinux-042b67799e2991e301df8269e166d8bc5944495e.tar.bz2
soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset
Most of the blk-ctrl reset bits are found in one register, however there are two bits in offset 8 for pulling the MIPI DPHY out of reset and one of them needs to be set when IMX8MM_DISPBLK_PD_MIPI_CSI is brought out of reset or the MIPI_CSI hangs. Since MIPI_DSI is impacted, add the additional one for MIPI_DSI too. Fixes: 926e57c065df ("soc: imx: imx8m-blk-ctrl: add DISP blk-ctrl") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'drivers/soc/imx/imx8m-blk-ctrl.c')
-rw-r--r--drivers/soc/imx/imx8m-blk-ctrl.c19
1 files changed, 19 insertions, 0 deletions
diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
index 519b3651d1d9..c2f076b56e24 100644
--- a/drivers/soc/imx/imx8m-blk-ctrl.c
+++ b/drivers/soc/imx/imx8m-blk-ctrl.c
@@ -17,6 +17,7 @@
#define BLK_SFT_RSTN 0x0
#define BLK_CLK_EN 0x4
+#define BLK_MIPI_RESET_DIV 0x8 /* Mini/Nano DISPLAY_BLK_CTRL only */
struct imx8m_blk_ctrl_domain;
@@ -36,6 +37,15 @@ struct imx8m_blk_ctrl_domain_data {
const char *gpc_name;
u32 rst_mask;
u32 clk_mask;
+
+ /*
+ * i.MX8M Mini and Nano have a third DISPLAY_BLK_CTRL register
+ * which is used to control the reset for the MIPI Phy.
+ * Since it's only present in certain circumstances,
+ * an if-statement should be used before setting and clearing this
+ * register.
+ */
+ u32 mipi_phy_rst_mask;
};
#define DOMAIN_MAX_CLKS 3
@@ -78,6 +88,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
/* put devices into reset */
regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
+ if (data->mipi_phy_rst_mask)
+ regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
/* enable upstream and blk-ctrl clocks to allow reset to propagate */
ret = clk_bulk_prepare_enable(data->num_clks, domain->clks);
@@ -99,6 +111,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
/* release reset */
regmap_set_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
+ if (data->mipi_phy_rst_mask)
+ regmap_set_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
/* disable upstream clocks */
clk_bulk_disable_unprepare(data->num_clks, domain->clks);
@@ -120,6 +134,9 @@ static int imx8m_blk_ctrl_power_off(struct generic_pm_domain *genpd)
struct imx8m_blk_ctrl *bc = domain->bc;
/* put devices into reset and disable clocks */
+ if (data->mipi_phy_rst_mask)
+ regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
+
regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
regmap_clear_bits(bc->regmap, BLK_CLK_EN, data->clk_mask);
@@ -480,6 +497,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mm_disp_blk_ctl_domain_data[]
.gpc_name = "mipi-dsi",
.rst_mask = BIT(5),
.clk_mask = BIT(8) | BIT(9),
+ .mipi_phy_rst_mask = BIT(17),
},
[IMX8MM_DISPBLK_PD_MIPI_CSI] = {
.name = "dispblk-mipi-csi",
@@ -488,6 +506,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mm_disp_blk_ctl_domain_data[]
.gpc_name = "mipi-csi",
.rst_mask = BIT(3) | BIT(4),
.clk_mask = BIT(10) | BIT(11),
+ .mipi_phy_rst_mask = BIT(16),
},
};