diff options
author | Sagar Dharia <sdharia@codeaurora.org> | 2017-12-11 23:43:06 +0000 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-12-19 11:01:03 +0100 |
commit | c088c335b49228ca1759dca5676f1534b0ac13a5 (patch) | |
tree | 44988185641a4bc6b97f8c76091a05c7e46f986b /drivers/slimbus | |
parent | ad7fcbc308b050e3c27c545021663d2cd73f8b23 (diff) | |
download | linux-c088c335b49228ca1759dca5676f1534b0ac13a5.tar.bz2 |
slimbus: qcom: Add runtime-pm support using clock-pause
Slimbus HW mandates that clock-pause sequence has to be executed
before disabling relevant interface and core clocks.
Runtime-PM's autosuspend feature is used here to enter/exit low
power mode for Qualcomm's Slimbus controller. Autosuspend feature
enables driver to avoid changing power-modes too frequently since
entering clock-pause is an expensive sequence
Signed-off-by: Sagar Dharia <sdharia@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviwed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/slimbus')
-rw-r--r-- | drivers/slimbus/qcom-ctrl.c | 101 |
1 files changed, 98 insertions, 3 deletions
diff --git a/drivers/slimbus/qcom-ctrl.c b/drivers/slimbus/qcom-ctrl.c index ace85ce3de90..35ad70dbfe3a 100644 --- a/drivers/slimbus/qcom-ctrl.c +++ b/drivers/slimbus/qcom-ctrl.c @@ -14,6 +14,7 @@ #include <linux/clk.h> #include <linux/of.h> #include <linux/dma-mapping.h> +#include <linux/pm_runtime.h> #include "slimbus.h" /* Manager registers */ @@ -65,6 +66,7 @@ ((l) | ((mt) << 5) | ((mc) << 8) | ((dt) << 15) | ((ad) << 16)) #define SLIM_ROOT_FREQ 24576000 +#define QCOM_SLIM_AUTOSUSPEND 1000 /* MAX message size over control channel */ #define SLIM_MSGQ_BUF_LEN 40 @@ -275,6 +277,30 @@ static irqreturn_t qcom_slim_interrupt(int irq, void *d) return ret; } +static int qcom_clk_pause_wakeup(struct slim_controller *sctrl) +{ + struct qcom_slim_ctrl *ctrl = dev_get_drvdata(sctrl->dev); + + clk_prepare_enable(ctrl->hclk); + clk_prepare_enable(ctrl->rclk); + enable_irq(ctrl->irq); + + writel_relaxed(1, ctrl->base + FRM_WAKEUP); + /* Make sure framer wakeup write goes through before ISR fires */ + mb(); + /* + * HW Workaround: Currently, slave is reporting lost-sync messages + * after SLIMbus comes out of clock pause. + * Transaction with slave fail before slave reports that message + * Give some time for that report to come + * SLIMbus wakes up in clock gear 10 at 24.576MHz. With each superframe + * being 250 usecs, we wait for 5-10 superframes here to ensure + * we get the message + */ + usleep_range(1250, 2500); + return 0; +} + void *slim_alloc_txbuf(struct qcom_slim_ctrl *ctrl, struct slim_msg_txn *txn, struct completion *done) { @@ -511,6 +537,7 @@ static int qcom_slim_probe(struct platform_device *pdev) sctrl->set_laddr = qcom_set_laddr; sctrl->xfer_msg = qcom_xfer_msg; + sctrl->wakeup = qcom_clk_pause_wakeup; ctrl->tx.n = QCOM_TX_MSGS; ctrl->tx.sl_sz = SLIM_MSGQ_BUF_LEN; ctrl->rx.n = QCOM_RX_MSGS; @@ -618,14 +645,81 @@ static int qcom_slim_remove(struct platform_device *pdev) { struct qcom_slim_ctrl *ctrl = platform_get_drvdata(pdev); - disable_irq(ctrl->irq); - clk_disable_unprepare(ctrl->hclk); - clk_disable_unprepare(ctrl->rclk); + pm_runtime_disable(&pdev->dev); slim_unregister_controller(&ctrl->ctrl); destroy_workqueue(ctrl->rxwq); return 0; } +/* + * If PM_RUNTIME is not defined, these 2 functions become helper + * functions to be called from system suspend/resume. + */ +#ifdef CONFIG_PM +static int qcom_slim_runtime_suspend(struct device *device) +{ + struct platform_device *pdev = to_platform_device(device); + struct qcom_slim_ctrl *ctrl = platform_get_drvdata(pdev); + int ret; + + dev_dbg(device, "pm_runtime: suspending...\n"); + ret = slim_ctrl_clk_pause(&ctrl->ctrl, false, SLIM_CLK_UNSPECIFIED); + if (ret) { + dev_err(device, "clk pause not entered:%d", ret); + } else { + disable_irq(ctrl->irq); + clk_disable_unprepare(ctrl->hclk); + clk_disable_unprepare(ctrl->rclk); + } + return ret; +} + +static int qcom_slim_runtime_resume(struct device *device) +{ + struct platform_device *pdev = to_platform_device(device); + struct qcom_slim_ctrl *ctrl = platform_get_drvdata(pdev); + int ret = 0; + + dev_dbg(device, "pm_runtime: resuming...\n"); + ret = slim_ctrl_clk_pause(&ctrl->ctrl, true, 0); + if (ret) + dev_err(device, "clk pause not exited:%d", ret); + return ret; +} +#endif + +#ifdef CONFIG_PM_SLEEP +static int qcom_slim_suspend(struct device *dev) +{ + int ret = 0; + + if (!pm_runtime_enabled(dev) || + (!pm_runtime_suspended(dev))) { + dev_dbg(dev, "system suspend"); + ret = qcom_slim_runtime_suspend(dev); + } + + return ret; +} + +static int qcom_slim_resume(struct device *dev) +{ + if (!pm_runtime_enabled(dev) || !pm_runtime_suspended(dev)) { + int ret; + + dev_dbg(dev, "system resume"); + ret = qcom_slim_runtime_resume(dev); + if (!ret) { + pm_runtime_mark_last_busy(dev); + pm_request_autosuspend(dev); + } + return ret; + + } + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + static const struct dev_pm_ops qcom_slim_dev_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(qcom_slim_suspend, qcom_slim_resume) SET_RUNTIME_PM_OPS( @@ -647,6 +741,7 @@ static struct platform_driver qcom_slim_driver = { .driver = { .name = "qcom_slim_ctrl", .of_match_table = qcom_slim_dt_match, + .pm = &qcom_slim_dev_pm_ops, }, }; module_platform_driver(qcom_slim_driver); |