diff options
author | Russell King <rmk@dyn-67.arm.linux.org.uk> | 2009-05-23 23:18:40 +0100 |
---|---|---|
committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2009-05-23 23:18:40 +0100 |
commit | fc05505b77f7900a1bb74fb3f3a4343dee4265a4 (patch) | |
tree | 6517919cb60bd9465078512cacbefd8c77f94b76 /drivers/serial | |
parent | a2ab67fae1ab9226679495a8d260f4e6555efc5f (diff) | |
parent | 11c79740d3c03cb81f84e98cf2e2dbd8d9bb53cd (diff) | |
download | linux-fc05505b77f7900a1bb74fb3f3a4343dee4265a4.tar.bz2 |
Merge branch 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6 into devel
Diffstat (limited to 'drivers/serial')
-rw-r--r-- | drivers/serial/jsm/jsm.h | 2 | ||||
-rw-r--r-- | drivers/serial/jsm/jsm_driver.c | 1 | ||||
-rw-r--r-- | drivers/serial/nwpserial.c | 4 | ||||
-rw-r--r-- | drivers/serial/s3c6400.c | 1 | ||||
-rw-r--r-- | drivers/serial/samsung.c | 61 | ||||
-rw-r--r-- | drivers/serial/samsung.h | 4 |
6 files changed, 66 insertions, 7 deletions
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h index 8871aaa3dba6..c0a3e2734e24 100644 --- a/drivers/serial/jsm/jsm.h +++ b/drivers/serial/jsm/jsm.h @@ -130,8 +130,6 @@ struct jsm_board struct pci_dev *pci_dev; u32 maxports; /* MAX ports this board can handle */ - spinlock_t bd_lock; /* Used to protect board */ - spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and * the interrupt routine from each other. */ diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index d2d32a198629..b3604aa322a4 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -88,7 +88,6 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device else brd->maxports = 2; - spin_lock_init(&brd->bd_lock); spin_lock_init(&brd->bd_intr_lock); /* store which revision we have */ diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c index 32f3eaf0d262..9e150b19d726 100644 --- a/drivers/serial/nwpserial.c +++ b/drivers/serial/nwpserial.c @@ -145,11 +145,13 @@ static irqreturn_t nwpserial_interrupt(int irq, void *dev_id) ch = dcr_read(up->dcr_host, UART_RX); if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID) tty_insert_flip_char(tty, ch, TTY_NORMAL); - } while (dcr_read(up->dcr_host, UART_RX) & UART_LSR_DR); + } while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR); tty_flip_buffer_push(tty); ret = IRQ_HANDLED; + /* clear interrupt */ + dcr_write(up->dcr_host, UART_IIR, 1); out: spin_unlock(&up->port.lock); return ret; diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c index 06936d13393f..3e3785233682 100644 --- a/drivers/serial/s3c6400.c +++ b/drivers/serial/s3c6400.c @@ -102,6 +102,7 @@ static struct s3c24xx_uart_info s3c6400_uart_inf = { .name = "Samsung S3C6400 UART", .type = PORT_S3C6400, .fifosize = 64, + .has_divslot = 1, .rx_fifomask = S3C2440_UFSTAT_RXMASK, .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, .rx_fifofull = S3C2440_UFSTAT_RXFULL, diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index e06686ae858b..93b5d75db126 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -508,6 +508,7 @@ s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) struct baud_calc { struct s3c24xx_uart_clksrc *clksrc; unsigned int calc; + unsigned int divslot; unsigned int quot; struct clk *src; }; @@ -517,6 +518,7 @@ static int s3c24xx_serial_calcbaud(struct baud_calc *calc, struct s3c24xx_uart_clksrc *clksrc, unsigned int baud) { + struct s3c24xx_uart_port *ourport = to_ourport(port); unsigned long rate; calc->src = clk_get(port->dev, clksrc->name); @@ -527,8 +529,24 @@ static int s3c24xx_serial_calcbaud(struct baud_calc *calc, rate /= clksrc->divisor; calc->clksrc = clksrc; - calc->quot = (rate + (8 * baud)) / (16 * baud); - calc->calc = (rate / (calc->quot * 16)); + + if (ourport->info->has_divslot) { + unsigned long div = rate / baud; + + /* The UDIVSLOT register on the newer UARTs allows us to + * get a divisor adjustment of 1/16th on the baud clock. + * + * We don't keep the UDIVSLOT value (the 16ths we calculated + * by not multiplying the baud by 16) as it is easy enough + * to recalculate. + */ + + calc->quot = div / 16; + calc->calc = rate / div; + } else { + calc->quot = (rate + (8 * baud)) / (16 * baud); + calc->calc = (rate / (calc->quot * 16)); + } calc->quot--; return 1; @@ -611,6 +629,30 @@ static unsigned int s3c24xx_serial_getclk(struct uart_port *port, return best->quot; } +/* udivslot_table[] + * + * This table takes the fractional value of the baud divisor and gives + * the recommended setting for the UDIVSLOT register. + */ +static u16 udivslot_table[16] = { + [0] = 0x0000, + [1] = 0x0080, + [2] = 0x0808, + [3] = 0x0888, + [4] = 0x2222, + [5] = 0x4924, + [6] = 0x4A52, + [7] = 0x54AA, + [8] = 0x5555, + [9] = 0xD555, + [10] = 0xD5D5, + [11] = 0xDDD5, + [12] = 0xDDDD, + [13] = 0xDFDD, + [14] = 0xDFDF, + [15] = 0xFFDF, +}; + static void s3c24xx_serial_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) @@ -623,6 +665,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, unsigned int baud, quot; unsigned int ulcon; unsigned int umcon; + unsigned int udivslot = 0; /* * We don't support modem control lines. @@ -644,6 +687,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, /* check to see if we need to change clock source */ if (ourport->clksrc != clksrc || ourport->baudclk != clk) { + dbg("selecting clock %p\n", clk); s3c24xx_serial_setsource(port, clksrc); if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) { @@ -658,6 +702,13 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; } + if (ourport->info->has_divslot) { + unsigned int div = ourport->baudclk_rate / baud; + + udivslot = udivslot_table[div & 15]; + dbg("udivslot = %04x (div %d)\n", udivslot, div & 15); + } + switch (termios->c_cflag & CSIZE) { case CS5: dbg("config: 5bits/char\n"); @@ -697,12 +748,16 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, spin_lock_irqsave(&port->lock, flags); - dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot); + dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n", + ulcon, quot, udivslot); wr_regl(port, S3C2410_ULCON, ulcon); wr_regl(port, S3C2410_UBRDIV, quot); wr_regl(port, S3C2410_UMCON, umcon); + if (ourport->info->has_divslot) + wr_regl(port, S3C2443_DIVSLOT, udivslot); + dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n", rd_regl(port, S3C2410_ULCON), rd_regl(port, S3C2410_UCON), diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h index 571d6b90d206..7afb94843a08 100644 --- a/drivers/serial/samsung.h +++ b/drivers/serial/samsung.h @@ -21,6 +21,10 @@ struct s3c24xx_uart_info { unsigned long tx_fifoshift; unsigned long tx_fifofull; + /* uart port features */ + + unsigned int has_divslot:1; + /* clock source control */ int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); |