summaryrefslogtreecommitdiffstats
path: root/drivers/serial/cpm_uart
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/serial/cpm_uart
downloadlinux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/serial/cpm_uart')
-rw-r--r--drivers/serial/cpm_uart/Makefile11
-rw-r--r--drivers/serial/cpm_uart/cpm_uart.h89
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_core.c1177
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm1.c290
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm1.h45
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm2.c328
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm2.h45
7 files changed, 1985 insertions, 0 deletions
diff --git a/drivers/serial/cpm_uart/Makefile b/drivers/serial/cpm_uart/Makefile
new file mode 100644
index 000000000000..e072724ea754
--- /dev/null
+++ b/drivers/serial/cpm_uart/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the Motorola 8xx FEC ethernet controller
+#
+
+obj-$(CONFIG_SERIAL_CPM) += cpm_uart.o
+
+# Select the correct platform objects.
+cpm_uart-objs-$(CONFIG_CPM2) += cpm_uart_cpm2.o
+cpm_uart-objs-$(CONFIG_8xx) += cpm_uart_cpm1.o
+
+cpm_uart-objs := cpm_uart_core.o $(cpm_uart-objs-y)
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
new file mode 100644
index 000000000000..5f6187baad86
--- /dev/null
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -0,0 +1,89 @@
+/*
+ * linux/drivers/serial/cpm_uart.h
+ *
+ * Driver for CPM (SCC/SMC) serial ports
+ *
+ * Copyright (C) 2004 Freescale Semiconductor, Inc.
+ *
+ */
+#ifndef CPM_UART_H
+#define CPM_UART_H
+
+#include <linux/config.h>
+
+#if defined(CONFIG_CPM2)
+#include "cpm_uart_cpm2.h"
+#elif defined(CONFIG_8xx)
+#include "cpm_uart_cpm1.h"
+#endif
+
+#define SERIAL_CPM_MAJOR 204
+#define SERIAL_CPM_MINOR 46
+
+#define IS_SMC(pinfo) (pinfo->flags & FLAG_SMC)
+#define IS_DISCARDING(pinfo) (pinfo->flags & FLAG_DISCARDING)
+#define FLAG_DISCARDING 0x00000004 /* when set, don't discard */
+#define FLAG_SMC 0x00000002
+#define FLAG_CONSOLE 0x00000001
+
+#define UART_SMC1 0
+#define UART_SMC2 1
+#define UART_SCC1 2
+#define UART_SCC2 3
+#define UART_SCC3 4
+#define UART_SCC4 5
+
+#define UART_NR 6
+
+#define RX_NUM_FIFO 4
+#define RX_BUF_SIZE 32
+#define TX_NUM_FIFO 4
+#define TX_BUF_SIZE 32
+
+struct uart_cpm_port {
+ struct uart_port port;
+ u16 rx_nrfifos;
+ u16 rx_fifosize;
+ u16 tx_nrfifos;
+ u16 tx_fifosize;
+ smc_t *smcp;
+ smc_uart_t *smcup;
+ scc_t *sccp;
+ scc_uart_t *sccup;
+ volatile cbd_t *rx_bd_base;
+ volatile cbd_t *rx_cur;
+ volatile cbd_t *tx_bd_base;
+ volatile cbd_t *tx_cur;
+ unsigned char *tx_buf;
+ unsigned char *rx_buf;
+ u32 flags;
+ void (*set_lineif)(struct uart_cpm_port *);
+ u8 brg;
+ uint dp_addr;
+ void *mem_addr;
+ dma_addr_t dma_addr;
+ /* helpers */
+ int baud;
+ int bits;
+ /* Keep track of 'odd' SMC2 wirings */
+ int is_portb;
+};
+
+extern int cpm_uart_port_map[UART_NR];
+extern int cpm_uart_nr;
+extern struct uart_cpm_port cpm_uart_ports[UART_NR];
+
+/* these are located in their respective files */
+void cpm_line_cr_cmd(int line, int cmd);
+int cpm_uart_init_portdesc(void);
+int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con);
+void cpm_uart_freebuf(struct uart_cpm_port *pinfo);
+
+void smc1_lineif(struct uart_cpm_port *pinfo);
+void smc2_lineif(struct uart_cpm_port *pinfo);
+void scc1_lineif(struct uart_cpm_port *pinfo);
+void scc2_lineif(struct uart_cpm_port *pinfo);
+void scc3_lineif(struct uart_cpm_port *pinfo);
+void scc4_lineif(struct uart_cpm_port *pinfo);
+
+#endif /* CPM_UART_H */
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
new file mode 100644
index 000000000000..29db677d4284
--- /dev/null
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -0,0 +1,1177 @@
+/*
+ * linux/drivers/serial/cpm_uart.c
+ *
+ * Driver for CPM (SCC/SMC) serial ports; core driver
+ *
+ * Based on arch/ppc/cpm2_io/uart.c by Dan Malek
+ * Based on ppc8xx.c by Thomas Gleixner
+ * Based on drivers/serial/amba.c by Russell King
+ *
+ * Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2)
+ * Pantelis Antoniou (panto@intracom.gr) (CPM1)
+ *
+ * Copyright (C) 2004 Freescale Semiconductor, Inc.
+ * (C) 2004 Intracom, S.A.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/bootmem.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/delay.h>
+
+#if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+#include <linux/kernel.h>
+
+#include "cpm_uart.h"
+
+/***********************************************************************/
+
+/* Track which ports are configured as uarts */
+int cpm_uart_port_map[UART_NR];
+/* How many ports did we config as uarts */
+int cpm_uart_nr;
+
+/**************************************************************/
+
+static int cpm_uart_tx_pump(struct uart_port *port);
+static void cpm_uart_init_smc(struct uart_cpm_port *pinfo);
+static void cpm_uart_init_scc(struct uart_cpm_port *pinfo);
+static void cpm_uart_initbd(struct uart_cpm_port *pinfo);
+
+/**************************************************************/
+
+/*
+ * Check, if transmit buffers are processed
+*/
+static unsigned int cpm_uart_tx_empty(struct uart_port *port)
+{
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ volatile cbd_t *bdp = pinfo->tx_bd_base;
+ int ret = 0;
+
+ while (1) {
+ if (bdp->cbd_sc & BD_SC_READY)
+ break;
+
+ if (bdp->cbd_sc & BD_SC_WRAP) {
+ ret = TIOCSER_TEMT;
+ break;
+ }
+ bdp++;
+ }
+
+ pr_debug("CPM uart[%d]:tx_empty: %d\n", port->line, ret);
+
+ return ret;
+}
+
+static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ /* Whee. Do nothing. */
+}
+
+static unsigned int cpm_uart_get_mctrl(struct uart_port *port)
+{
+ /* Whee. Do nothing. */
+ return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+}
+
+/*
+ * Stop transmitter
+ */
+static void cpm_uart_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ volatile smc_t *smcp = pinfo->smcp;
+ volatile scc_t *sccp = pinfo->sccp;
+
+ pr_debug("CPM uart[%d]:stop tx\n", port->line);
+
+ if (IS_SMC(pinfo))
+ smcp->smc_smcm &= ~SMCM_TX;
+ else
+ sccp->scc_sccm &= ~UART_SCCM_TX;
+}
+
+/*
+ * Start transmitter
+ */
+static void cpm_uart_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ volatile smc_t *smcp = pinfo->smcp;
+ volatile scc_t *sccp = pinfo->sccp;
+
+ pr_debug("CPM uart[%d]:start tx\n", port->line);
+
+ if (IS_SMC(pinfo)) {
+ if (smcp->smc_smcm & SMCM_TX)
+ return;
+ } else {
+ if (sccp->scc_sccm & UART_SCCM_TX)
+ return;
+ }
+
+ if (cpm_uart_tx_pump(port) != 0) {
+ if (IS_SMC(pinfo))
+ smcp->smc_smcm |= SMCM_TX;
+ else
+ sccp->scc_sccm |= UART_SCCM_TX;
+ }
+}
+
+/*
+ * Stop receiver
+ */
+static void cpm_uart_stop_rx(struct uart_port *port)
+{
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ volatile smc_t *smcp = pinfo->smcp;
+ volatile scc_t *sccp = pinfo->sccp;
+
+ pr_debug("CPM uart[%d]:stop rx\n", port->line);
+
+ if (IS_SMC(pinfo))
+ smcp->smc_smcm &= ~SMCM_RX;
+ else
+ sccp->scc_sccm &= ~UART_SCCM_RX;
+}
+
+/*
+ * Enable Modem status interrupts
+ */
+static void cpm_uart_enable_ms(struct uart_port *port)
+{
+ pr_debug("CPM uart[%d]:enable ms\n", port->line);
+}
+
+/*
+ * Generate a break.
+ */
+static void cpm_uart_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ int line = pinfo - cpm_uart_ports;
+
+ pr_debug("CPM uart[%d]:break ctrl, break_state: %d\n", port->line,
+ break_state);
+
+ if (break_state)
+ cpm_line_cr_cmd(line, CPM_CR_STOP_TX);
+ else
+ cpm_line_cr_cmd(line, CPM_CR_RESTART_TX);
+}
+
+/*
+ * Transmit characters, refill buffer descriptor, if possible
+ */
+static void cpm_uart_int_tx(struct uart_port *port, struct pt_regs *regs)
+{
+ pr_debug("CPM uart[%d]:TX INT\n", port->line);
+
+ cpm_uart_tx_pump(port);
+}
+
+/*
+ * Receive characters
+ */
+static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs)
+{
+ int i;
+ unsigned char ch, *cp;
+ struct tty_struct *tty = port->info->tty;
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ volatile cbd_t *bdp;
+ u16 status;
+ unsigned int flg;
+
+ pr_debug("CPM uart[%d]:RX INT\n", port->line);
+
+ /* Just loop through the closed BDs and copy the characters into
+ * the buffer.
+ */
+ bdp = pinfo->rx_cur;
+ for (;;) {
+ /* get status */
+ status = bdp->cbd_sc;
+ /* If this one is empty, return happy */
+ if (status & BD_SC_EMPTY)
+ break;
+
+ /* get number of characters, and check spce in flip-buffer */
+ i = bdp->cbd_datlen;
+
+ /* If we have not enough room in tty flip buffer, then we try
+ * later, which will be the next rx-interrupt or a timeout
+ */
+ if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE) {
+ tty->flip.work.func((void *)tty);
+ if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE) {
+ printk(KERN_WARNING "TTY_DONT_FLIP set\n");
+ return;
+ }
+ }
+
+ /* get pointer */
+ cp = (unsigned char *)bus_to_virt(bdp->cbd_bufaddr);
+
+ /* loop through the buffer */
+ while (i-- > 0) {
+ ch = *cp++;
+ port->icount.rx++;
+ flg = TTY_NORMAL;
+
+ if (status &
+ (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV))
+ goto handle_error;
+ if (uart_handle_sysrq_char(port, ch, regs))
+ continue;
+
+ error_return:
+ *tty->flip.char_buf_ptr++ = ch;
+ *tty->flip.flag_buf_ptr++ = flg;
+ tty->flip.count++;
+
+ } /* End while (i--) */
+
+ /* This BD is ready to be used again. Clear status. get next */
+ bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV);
+ bdp->cbd_sc |= BD_SC_EMPTY;
+
+ if (bdp->cbd_sc & BD_SC_WRAP)
+ bdp = pinfo->rx_bd_base;
+ else
+ bdp++;
+ } /* End for (;;) */
+
+ /* Write back buffer pointer */
+ pinfo->rx_cur = (volatile cbd_t *) bdp;
+
+ /* activate BH processing */
+ tty_flip_buffer_push(tty);
+
+ return;
+
+ /* Error processing */
+
+ handle_error:
+ /* Statistics */
+ if (status & BD_SC_BR)
+ port->icount.brk++;
+ if (status & BD_SC_PR)
+ port->icount.parity++;
+ if (status & BD_SC_FR)
+ port->icount.frame++;
+ if (status & BD_SC_OV)
+ port->icount.overrun++;
+
+ /* Mask out ignored conditions */
+ status &= port->read_status_mask;
+
+ /* Handle the remaining ones */
+ if (status & BD_SC_BR)
+ flg = TTY_BREAK;
+ else if (status & BD_SC_PR)
+ flg = TTY_PARITY;
+ else if (status & BD_SC_FR)
+ flg = TTY_FRAME;
+
+ /* overrun does not affect the current character ! */
+ if (status & BD_SC_OV) {
+ ch = 0;
+ flg = TTY_OVERRUN;
+ /* We skip this buffer */
+ /* CHECK: Is really nothing senseful there */
+ /* ASSUMPTION: it contains nothing valid */
+ i = 0;
+ }
+#ifdef SUPPORT_SYSRQ
+ port->sysrq = 0;
+#endif
+ goto error_return;
+}
+
+/*
+ * Asynchron mode interrupt handler
+ */
+static irqreturn_t cpm_uart_int(int irq, void *data, struct pt_regs *regs)
+{
+ u8 events;
+ struct uart_port *port = (struct uart_port *)data;
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ volatile smc_t *smcp = pinfo->smcp;
+ volatile scc_t *sccp = pinfo->sccp;
+
+ pr_debug("CPM uart[%d]:IRQ\n", port->line);
+
+ if (IS_SMC(pinfo)) {
+ events = smcp->smc_smce;
+ if (events & SMCM_BRKE)
+ uart_handle_break(port);
+ if (events & SMCM_RX)
+ cpm_uart_int_rx(port, regs);
+ if (events & SMCM_TX)
+ cpm_uart_int_tx(port, regs);
+ smcp->smc_smce = events;
+ } else {
+ events = sccp->scc_scce;
+ if (events & UART_SCCM_BRKE)
+ uart_handle_break(port);
+ if (events & UART_SCCM_RX)
+ cpm_uart_int_rx(port, regs);
+ if (events & UART_SCCM_TX)
+ cpm_uart_int_tx(port, regs);
+ sccp->scc_scce = events;
+ }
+ return (events) ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int cpm_uart_startup(struct uart_port *port)
+{
+ int retval;
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+
+ pr_debug("CPM uart[%d]:startup\n", port->line);
+
+ /* Install interrupt handler. */
+ retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port);
+ if (retval)
+ return retval;
+
+ /* Startup rx-int */
+ if (IS_SMC(pinfo)) {
+ pinfo->smcp->smc_smcm |= SMCM_RX;
+ pinfo->smcp->smc_smcmr |= SMCMR_REN;
+ } else {
+ pinfo->sccp->scc_sccm |= UART_SCCM_RX;
+ }
+
+ return 0;
+}
+
+/*
+ * Shutdown the uart
+ */
+static void cpm_uart_shutdown(struct uart_port *port)
+{
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ int line = pinfo - cpm_uart_ports;
+
+ pr_debug("CPM uart[%d]:shutdown\n", port->line);
+
+ /* free interrupt handler */
+ free_irq(port->irq, port);
+
+ /* If the port is not the console, disable Rx and Tx. */
+ if (!(pinfo->flags & FLAG_CONSOLE)) {
+ /* Stop uarts */
+ if (IS_SMC(pinfo)) {
+ volatile smc_t *smcp = pinfo->smcp;
+ smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+ smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
+ } else {
+ volatile scc_t *sccp = pinfo->sccp;
+ sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
+ }
+
+ /* Shut them really down and reinit buffer descriptors */
+ cpm_line_cr_cmd(line, CPM_CR_STOP_TX);
+ cpm_uart_initbd(pinfo);
+ }
+}
+
+static void cpm_uart_set_termios(struct uart_port *port,
+ struct termios *termios, struct termios *old)
+{
+ int baud;
+ unsigned long flags;
+ u16 cval, scval, prev_mode;
+ int bits, sbits;
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ volatile smc_t *smcp = pinfo->smcp;
+ volatile scc_t *sccp = pinfo->sccp;
+
+ pr_debug("CPM uart[%d]:set_termios\n", port->line);
+
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+
+ /* Character length programmed into the mode register is the
+ * sum of: 1 start bit, number of data bits, 0 or 1 parity bit,
+ * 1 or 2 stop bits, minus 1.
+ * The value 'bits' counts this for us.
+ */
+ cval = 0;
+ scval = 0;
+
+ /* byte size */
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ bits = 5;
+ break;
+ case CS6:
+ bits = 6;
+ break;
+ case CS7:
+ bits = 7;
+ break;
+ case CS8:
+ bits = 8;
+ break;
+ /* Never happens, but GCC is too dumb to figure it out */
+ default:
+ bits = 8;
+ break;
+ }
+ sbits = bits - 5;
+
+ if (termios->c_cflag & CSTOPB) {
+ cval |= SMCMR_SL; /* Two stops */
+ scval |= SCU_PSMR_SL;
+ bits++;
+ }
+
+ if (termios->c_cflag & PARENB) {
+ cval |= SMCMR_PEN;
+ scval |= SCU_PSMR_PEN;
+ bits++;
+ if (!(termios->c_cflag & PARODD)) {
+ cval |= SMCMR_PM_EVEN;
+ scval |= (SCU_PSMR_REVP | SCU_PSMR_TEVP);
+ }
+ }
+
+ /*
+ * Set up parity check flag
+ */
+#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+ port->read_status_mask = (BD_SC_EMPTY | BD_SC_OV);
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= BD_SC_FR | BD_SC_PR;
+ if ((termios->c_iflag & BRKINT) || (termios->c_iflag & PARMRK))
+ port->read_status_mask |= BD_SC_BR;
+
+ /*
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= BD_SC_PR | BD_SC_FR;
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= BD_SC_BR;
+ /*
+ * If we're ignore parity and break indicators, ignore
+ * overruns too. (For real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= BD_SC_OV;
+ }
+ /*
+ * !!! ignore all characters if CREAD is not set
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->read_status_mask &= ~BD_SC_EMPTY;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Start bit has not been added (so don't, because we would just
+ * subtract it later), and we need to add one for the number of
+ * stops bits (there is always at least one).
+ */
+ bits++;
+ if (IS_SMC(pinfo)) {
+ /* Set the mode register. We want to keep a copy of the
+ * enables, because we want to put them back if they were
+ * present.
+ */
+ prev_mode = smcp->smc_smcmr;
+ smcp->smc_smcmr = smcr_mk_clen(bits) | cval | SMCMR_SM_UART;
+ smcp->smc_smcmr |= (prev_mode & (SMCMR_REN | SMCMR_TEN));
+ } else {
+ sccp->scc_psmr = (sbits << 12) | scval;
+ }
+
+ cpm_set_brg(pinfo->brg - 1, baud);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+}
+
+static const char *cpm_uart_type(struct uart_port *port)
+{
+ pr_debug("CPM uart[%d]:uart_type\n", port->line);
+
+ return port->type == PORT_CPM ? "CPM UART" : NULL;
+}
+
+/*
+ * verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int cpm_uart_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ int ret = 0;
+
+ pr_debug("CPM uart[%d]:verify_port\n", port->line);
+
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM)
+ ret = -EINVAL;
+ if (ser->irq < 0 || ser->irq >= NR_IRQS)
+ ret = -EINVAL;
+ if (ser->baud_base < 9600)
+ ret = -EINVAL;
+ return ret;
+}
+
+/*
+ * Transmit characters, refill buffer descriptor, if possible
+ */
+static int cpm_uart_tx_pump(struct uart_port *port)
+{
+ volatile cbd_t *bdp;
+ unsigned char *p;
+ int count;
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ struct circ_buf *xmit = &port->info->xmit;
+
+ /* Handle xon/xoff */
+ if (port->x_char) {
+ /* Pick next descriptor and fill from buffer */
+ bdp = pinfo->tx_cur;
+
+ p = bus_to_virt(bdp->cbd_bufaddr);
+ *p++ = xmit->buf[xmit->tail];
+ bdp->cbd_datlen = 1;
+ bdp->cbd_sc |= BD_SC_READY;
+ /* Get next BD. */
+ if (bdp->cbd_sc & BD_SC_WRAP)
+ bdp = pinfo->tx_bd_base;
+ else
+ bdp++;
+ pinfo->tx_cur = bdp;
+
+ port->icount.tx++;
+ port->x_char = 0;
+ return 1;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ cpm_uart_stop_tx(port, 0);
+ return 0;
+ }
+
+ /* Pick next descriptor and fill from buffer */
+ bdp = pinfo->tx_cur;
+
+ while (!(bdp->cbd_sc & BD_SC_READY) && (xmit->tail != xmit->head)) {
+ count = 0;
+ p = bus_to_virt(bdp->cbd_bufaddr);
+ while (count < pinfo->tx_fifosize) {
+ *p++ = xmit->buf[xmit->tail];
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ count++;
+ if (xmit->head == xmit->tail)
+ break;
+ }
+ bdp->cbd_datlen = count;
+ bdp->cbd_sc |= BD_SC_READY;
+ /* Get next BD. */
+ if (bdp->cbd_sc & BD_SC_WRAP)
+ bdp = pinfo->tx_bd_base;
+ else
+ bdp++;
+ }
+ pinfo->tx_cur = bdp;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit)) {
+ cpm_uart_stop_tx(port, 0);
+ return 0;
+ }
+
+ return 1;
+}
+
+/*
+ * init buffer descriptors
+ */
+static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
+{
+ int i;
+ u8 *mem_addr;
+ volatile cbd_t *bdp;
+
+ pr_debug("CPM uart[%d]:initbd\n", pinfo->port.line);
+
+ /* Set the physical address of the host memory
+ * buffers in the buffer descriptors, and the
+ * virtual address for us to work with.
+ */
+ mem_addr = pinfo->mem_addr;
+ bdp = pinfo->rx_cur = pinfo->rx_bd_base;
+ for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) {
+ bdp->cbd_bufaddr = virt_to_bus(mem_addr);
+ bdp->cbd_sc = BD_SC_EMPTY | BD_SC_INTRPT;
+ mem_addr += pinfo->rx_fifosize;
+ }
+
+ bdp->cbd_bufaddr = virt_to_bus(mem_addr);
+ bdp->cbd_sc = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
+
+ /* Set the physical address of the host memory
+ * buffers in the buffer descriptors, and the
+ * virtual address for us to work with.
+ */
+ mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize);
+ bdp = pinfo->tx_cur = pinfo->tx_bd_base;
+ for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) {
+ bdp->cbd_bufaddr = virt_to_bus(mem_addr);
+ bdp->cbd_sc = BD_SC_INTRPT;
+ mem_addr += pinfo->tx_fifosize;
+ }
+
+ bdp->cbd_bufaddr = virt_to_bus(mem_addr);
+ bdp->cbd_sc = BD_SC_WRAP | BD_SC_INTRPT;
+}
+
+static void cpm_uart_init_scc(struct uart_cpm_port *pinfo)
+{
+ int line = pinfo - cpm_uart_ports;
+ volatile scc_t *scp;
+ volatile scc_uart_t *sup;
+
+ pr_debug("CPM uart[%d]:init_scc\n", pinfo->port.line);
+
+ scp = pinfo->sccp;
+ sup = pinfo->sccup;
+
+ /* Store address */
+ pinfo->sccup->scc_genscc.scc_rbase = (unsigned char *)pinfo->rx_bd_base - DPRAM_BASE;
+ pinfo->sccup->scc_genscc.scc_tbase = (unsigned char *)pinfo->tx_bd_base - DPRAM_BASE;
+
+ /* Set up the uart parameters in the
+ * parameter ram.
+ */
+
+ cpm_set_scc_fcr(sup);
+
+ sup->scc_genscc.scc_mrblr = pinfo->rx_fifosize;
+ sup->scc_maxidl = pinfo->rx_fifosize;
+ sup->scc_brkcr = 1;
+ sup->scc_parec = 0;
+ sup->scc_frmec = 0;
+ sup->scc_nosec = 0;
+ sup->scc_brkec = 0;
+ sup->scc_uaddr1 = 0;
+ sup->scc_uaddr2 = 0;
+ sup->scc_toseq = 0;
+ sup->scc_char1 = 0x8000;
+ sup->scc_char2 = 0x8000;
+ sup->scc_char3 = 0x8000;
+ sup->scc_char4 = 0x8000;
+ sup->scc_char5 = 0x8000;
+ sup->scc_char6 = 0x8000;
+ sup->scc_char7 = 0x8000;
+ sup->scc_char8 = 0x8000;
+ sup->scc_rccm = 0xc0ff;
+
+ /* Send the CPM an initialize command.
+ */
+ cpm_line_cr_cmd(line, CPM_CR_INIT_TRX);
+
+ /* Set UART mode, 8 bit, no parity, one stop.
+ * Enable receive and transmit.
+ */
+ scp->scc_gsmrh = 0;
+ scp->scc_gsmrl =
+ (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
+
+ /* Enable rx interrupts and clear all pending events. */
+ scp->scc_sccm = 0;
+ scp->scc_scce = 0xffff;
+ scp->scc_dsr = 0x7e7e;
+ scp->scc_psmr = 0x3000;
+
+ scp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+}
+
+static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
+{
+ int line = pinfo - cpm_uart_ports;
+ volatile smc_t *sp;
+ volatile smc_uart_t *up;
+
+ pr_debug("CPM uart[%d]:init_smc\n", pinfo->port.line);
+
+ sp = pinfo->smcp;
+ up = pinfo->smcup;
+
+ /* Store address */
+ pinfo->smcup->smc_rbase = (u_char *)pinfo->rx_bd_base - DPRAM_BASE;
+ pinfo->smcup->smc_tbase = (u_char *)pinfo->tx_bd_base - DPRAM_BASE;
+
+/*
+ * In case SMC1 is being relocated...
+ */
+#if defined (CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
+ up->smc_rbptr = pinfo->smcup->smc_rbase;
+ up->smc_tbptr = pinfo->smcup->smc_tbase;
+ up->smc_rstate = 0;
+ up->smc_tstate = 0;
+ up->smc_brkcr = 1; /* number of break chars */
+ up->smc_brkec = 0;
+#endif
+
+ /* Set up the uart parameters in the
+ * parameter ram.
+ */
+ cpm_set_smc_fcr(up);
+
+ /* Using idle charater time requires some additional tuning. */
+ up->smc_mrblr = pinfo->rx_fifosize;
+ up->smc_maxidl = pinfo->rx_fifosize;
+ up->smc_brkcr = 1;
+
+ cpm_line_cr_cmd(line, CPM_CR_INIT_TRX);
+
+ /* Set UART mode, 8 bit, no parity, one stop.
+ * Enable receive and transmit.
+ */
+ sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
+
+ /* Enable only rx interrupts clear all pending events. */
+ sp->smc_smcm = 0;
+ sp->smc_smce = 0xff;
+
+ sp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN);
+}
+
+/*
+ * Initialize port. This is called from early_console stuff
+ * so we have to be careful here !
+ */
+static int cpm_uart_request_port(struct uart_port *port)
+{
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ int ret;
+
+ pr_debug("CPM uart[%d]:request port\n", port->line);
+
+ if (pinfo->flags & FLAG_CONSOLE)
+ return 0;
+
+ /*
+ * Setup any port IO, connect any baud rate generators,
+ * etc. This is expected to be handled by board
+ * dependant code
+ */
+ if (pinfo->set_lineif)
+ pinfo->set_lineif(pinfo);
+
+ if (IS_SMC(pinfo)) {
+ pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
+ pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+ } else {
+ pinfo->sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
+ pinfo->sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ }
+
+ ret = cpm_uart_allocbuf(pinfo, 0);
+
+ if (ret)
+ return ret;
+
+ cpm_uart_initbd(pinfo);
+
+ return 0;
+}
+
+static void cpm_uart_release_port(struct uart_port *port)
+{
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+
+ if (!(pinfo->flags & FLAG_CONSOLE))
+ cpm_uart_freebuf(pinfo);
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void cpm_uart_config_port(struct uart_port *port, int flags)
+{
+ pr_debug("CPM uart[%d]:config_port\n", port->line);
+
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_CPM;
+ cpm_uart_request_port(port);
+ }
+}
+static struct uart_ops cpm_uart_pops = {
+ .tx_empty = cpm_uart_tx_empty,
+ .set_mctrl = cpm_uart_set_mctrl,
+ .get_mctrl = cpm_uart_get_mctrl,
+ .stop_tx = cpm_uart_stop_tx,
+ .start_tx = cpm_uart_start_tx,
+ .stop_rx = cpm_uart_stop_rx,
+ .enable_ms = cpm_uart_enable_ms,
+ .break_ctl = cpm_uart_break_ctl,
+ .startup = cpm_uart_startup,
+ .shutdown = cpm_uart_shutdown,
+ .set_termios = cpm_uart_set_termios,
+ .type = cpm_uart_type,
+ .release_port = cpm_uart_release_port,
+ .request_port = cpm_uart_request_port,
+ .config_port = cpm_uart_config_port,
+ .verify_port = cpm_uart_verify_port,
+};
+
+struct uart_cpm_port cpm_uart_ports[UART_NR] = {
+ [UART_SMC1] = {
+ .port = {
+ .irq = SMC1_IRQ,
+ .ops = &cpm_uart_pops,
+ .iotype = SERIAL_IO_MEM,
+ .lock = SPIN_LOCK_UNLOCKED,
+ },
+ .flags = FLAG_SMC,
+ .tx_nrfifos = TX_NUM_FIFO,
+ .tx_fifosize = TX_BUF_SIZE,
+ .rx_nrfifos = RX_NUM_FIFO,
+ .rx_fifosize = RX_BUF_SIZE,
+ .set_lineif = smc1_lineif,
+ },
+ [UART_SMC2] = {
+ .port = {
+ .irq = SMC2_IRQ,
+ .ops = &cpm_uart_pops,
+ .iotype = SERIAL_IO_MEM,
+ .lock = SPIN_LOCK_UNLOCKED,
+ },
+ .flags = FLAG_SMC,
+ .tx_nrfifos = TX_NUM_FIFO,
+ .tx_fifosize = TX_BUF_SIZE,
+ .rx_nrfifos = RX_NUM_FIFO,
+ .rx_fifosize = RX_BUF_SIZE,
+ .set_lineif = smc2_lineif,
+#ifdef CONFIG_SERIAL_CPM_ALT_SMC2
+ .is_portb = 1,
+#endif
+ },
+ [UART_SCC1] = {
+ .port = {
+ .irq = SCC1_IRQ,
+ .ops = &cpm_uart_pops,
+ .iotype = SERIAL_IO_MEM,
+ .lock = SPIN_LOCK_UNLOCKED,
+ },
+ .tx_nrfifos = TX_NUM_FIFO,
+ .tx_fifosize = TX_BUF_SIZE,
+ .rx_nrfifos = RX_NUM_FIFO,
+ .rx_fifosize = RX_BUF_SIZE,
+ .set_lineif = scc1_lineif,
+ },
+ [UART_SCC2] = {
+ .port = {
+ .irq = SCC2_IRQ,
+ .ops = &cpm_uart_pops,
+ .iotype = SERIAL_IO_MEM,
+ .lock = SPIN_LOCK_UNLOCKED,
+ },
+ .tx_nrfifos = TX_NUM_FIFO,
+ .tx_fifosize = TX_BUF_SIZE,
+ .rx_nrfifos = RX_NUM_FIFO,
+ .rx_fifosize = RX_BUF_SIZE,
+ .set_lineif = scc2_lineif,
+ },
+ [UART_SCC3] = {
+ .port = {
+ .irq = SCC3_IRQ,
+ .ops = &cpm_uart_pops,
+ .iotype = SERIAL_IO_MEM,
+ .lock = SPIN_LOCK_UNLOCKED,
+ },
+ .tx_nrfifos = TX_NUM_FIFO,
+ .tx_fifosize = TX_BUF_SIZE,
+ .rx_nrfifos = RX_NUM_FIFO,
+ .rx_fifosize = RX_BUF_SIZE,
+ .set_lineif = scc3_lineif,
+ },
+ [UART_SCC4] = {
+ .port = {
+ .irq = SCC4_IRQ,
+ .ops = &cpm_uart_pops,
+ .iotype = SERIAL_IO_MEM,
+ .lock = SPIN_LOCK_UNLOCKED,
+ },
+ .tx_nrfifos = TX_NUM_FIFO,
+ .tx_fifosize = TX_BUF_SIZE,
+ .rx_nrfifos = RX_NUM_FIFO,
+ .rx_fifosize = RX_BUF_SIZE,
+ .set_lineif = scc4_lineif,
+ },
+};
+
+#ifdef CONFIG_SERIAL_CPM_CONSOLE
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * Note that this is called with interrupts already disabled
+ */
+static void cpm_uart_console_write(struct console *co, const char *s,
+ u_int count)
+{
+ struct uart_cpm_port *pinfo =
+ &cpm_uart_ports[cpm_uart_port_map[co->index]];
+ unsigned int i;
+ volatile cbd_t *bdp, *bdbase;
+ volatile unsigned char *cp;
+
+ /* Get the address of the host memory buffer.
+ */
+ bdp = pinfo->tx_cur;
+ bdbase = pinfo->tx_bd_base;
+
+ /*
+ * Now, do each character. This is not as bad as it looks
+ * since this is a holding FIFO and not a transmitting FIFO.
+ * We could add the complexity of filling the entire transmit
+ * buffer, but we would just wait longer between accesses......
+ */
+ for (i = 0; i < count; i++, s++) {
+ /* Wait for transmitter fifo to empty.
+ * Ready indicates output is ready, and xmt is doing
+ * that, not that it is ready for us to send.
+ */
+ while ((bdp->cbd_sc & BD_SC_READY) != 0)
+ ;
+
+ /* Send the character out.
+ * If the buffer address is in the CPM DPRAM, don't
+ * convert it.
+ */
+ if ((uint) (bdp->cbd_bufaddr) > (uint) CPM_ADDR)
+ cp = (unsigned char *) (bdp->cbd_bufaddr);
+ else
+ cp = bus_to_virt(bdp->cbd_bufaddr);
+
+ *cp = *s;
+
+ bdp->cbd_datlen = 1;
+ bdp->cbd_sc |= BD_SC_READY;
+
+ if (bdp->cbd_sc & BD_SC_WRAP)
+ bdp = bdbase;
+ else
+ bdp++;
+
+ /* if a LF, also do CR... */
+ if (*s == 10) {
+ while ((bdp->cbd_sc & BD_SC_READY) != 0)
+ ;
+
+ if ((uint) (bdp->cbd_bufaddr) > (uint) CPM_ADDR)
+ cp = (unsigned char *) (bdp->cbd_bufaddr);
+ else
+ cp = bus_to_virt(bdp->cbd_bufaddr);
+
+ *cp = 13;
+ bdp->cbd_datlen = 1;
+ bdp->cbd_sc |= BD_SC_READY;
+
+ if (bdp->cbd_sc & BD_SC_WRAP)
+ bdp = bdbase;
+ else
+ bdp++;
+ }
+ }
+
+ /*
+ * Finally, Wait for transmitter & holding register to empty
+ * and restore the IER
+ */
+ while ((bdp->cbd_sc & BD_SC_READY) != 0)
+ ;
+
+ pinfo->tx_cur = (volatile cbd_t *) bdp;
+}
+
+/*
+ * Setup console. Be careful is called early !
+ */
+static int __init cpm_uart_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ struct uart_cpm_port *pinfo;
+ int baud = 38400;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+ int ret;
+
+ port =
+ (struct uart_port *)&cpm_uart_ports[cpm_uart_port_map[co->index]];
+ pinfo = (struct uart_cpm_port *)port;
+
+ pinfo->flags |= FLAG_CONSOLE;
+
+ if (options) {
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ } else {
+ bd_t *bd = (bd_t *) __res;
+
+ if (bd->bi_baudrate)
+ baud = bd->bi_baudrate;
+ else
+ baud = 9600;
+ }
+
+ /*
+ * Setup any port IO, connect any baud rate generators,
+ * etc. This is expected to be handled by board
+ * dependant code
+ */
+ if (pinfo->set_lineif)
+ pinfo->set_lineif(pinfo);
+
+ if (IS_SMC(pinfo)) {
+ pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
+ pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+ } else {
+ pinfo->sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
+ pinfo->sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ }
+
+ ret = cpm_uart_allocbuf(pinfo, 1);
+
+ if (ret)
+ return ret;
+
+ cpm_uart_initbd(pinfo);
+
+ if (IS_SMC(pinfo))
+ cpm_uart_init_smc(pinfo);
+ else
+ cpm_uart_init_scc(pinfo);
+
+ uart_set_options(port, co, baud, parity, bits, flow);
+
+ return 0;
+}
+
+extern struct uart_driver cpm_reg;
+static struct console cpm_scc_uart_console = {
+ .name "ttyCPM",
+ .write cpm_uart_console_write,
+ .device uart_console_device,
+ .setup cpm_uart_console_setup,
+ .flags CON_PRINTBUFFER,
+ .index -1,
+ .data = &cpm_reg,
+};
+
+int __init cpm_uart_console_init(void)
+{
+ int ret = cpm_uart_init_portdesc();
+
+ if (!ret)
+ register_console(&cpm_scc_uart_console);
+ return ret;
+}
+
+console_initcall(cpm_uart_console_init);
+
+#define CPM_UART_CONSOLE &cpm_scc_uart_console
+#else
+#define CPM_UART_CONSOLE NULL
+#endif
+
+static struct uart_driver cpm_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "ttyCPM",
+ .dev_name = "ttyCPM",
+ .major = SERIAL_CPM_MAJOR,
+ .minor = SERIAL_CPM_MINOR,
+ .cons = CPM_UART_CONSOLE,
+};
+
+static int __init cpm_uart_init(void)
+{
+ int ret, i;
+
+ printk(KERN_INFO "Serial: CPM driver $Revision: 0.01 $\n");
+
+#ifndef CONFIG_SERIAL_CPM_CONSOLE
+ ret = cpm_uart_init_portdesc();
+ if (ret)
+ return ret;
+#endif
+
+ cpm_reg.nr = cpm_uart_nr;
+ ret = uart_register_driver(&cpm_reg);
+
+ if (ret)
+ return ret;
+
+ for (i = 0; i < cpm_uart_nr; i++) {
+ int con = cpm_uart_port_map[i];
+ cpm_uart_ports[con].port.line = i;
+ cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
+ uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
+ }
+
+ return ret;
+}
+
+static void __exit cpm_uart_exit(void)
+{
+ int i;
+
+ for (i = 0; i < cpm_uart_nr; i++) {
+ int con = cpm_uart_port_map[i];
+ uart_remove_one_port(&cpm_reg, &cpm_uart_ports[con].port);
+ }
+
+ uart_unregister_driver(&cpm_reg);
+}
+
+module_init(cpm_uart_init);
+module_exit(cpm_uart_exit);
+
+MODULE_AUTHOR("Kumar Gala/Antoniou Pantelis");
+MODULE_DESCRIPTION("CPM SCC/SMC port driver $Revision: 0.01 $");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV(SERIAL_CPM_MAJOR, SERIAL_CPM_MINOR);
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
new file mode 100644
index 000000000000..de26cf7b003c
--- /dev/null
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -0,0 +1,290 @@
+/*
+ * linux/drivers/serial/cpm_uart.c
+ *
+ * Driver for CPM (SCC/SMC) serial ports; CPM1 definitions
+ *
+ * Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2)
+ * Pantelis Antoniou (panto@intracom.gr) (CPM1)
+ *
+ * Copyright (C) 2004 Freescale Semiconductor, Inc.
+ * (C) 2004 Intracom, S.A.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/bootmem.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <linux/serial_core.h>
+#include <linux/kernel.h>
+
+#include "cpm_uart.h"
+
+/**************************************************************/
+
+void cpm_line_cr_cmd(int line, int cmd)
+{
+ ushort val;
+ volatile cpm8xx_t *cp = cpmp;
+
+ switch (line) {
+ case UART_SMC1:
+ val = mk_cr_cmd(CPM_CR_CH_SMC1, cmd) | CPM_CR_FLG;
+ break;
+ case UART_SMC2:
+ val = mk_cr_cmd(CPM_CR_CH_SMC2, cmd) | CPM_CR_FLG;
+ break;
+ case UART_SCC1:
+ val = mk_cr_cmd(CPM_CR_CH_SCC1, cmd) | CPM_CR_FLG;
+ break;
+ case UART_SCC2:
+ val = mk_cr_cmd(CPM_CR_CH_SCC2, cmd) | CPM_CR_FLG;
+ break;
+ case UART_SCC3:
+ val = mk_cr_cmd(CPM_CR_CH_SCC3, cmd) | CPM_CR_FLG;
+ break;
+ case UART_SCC4:
+ val = mk_cr_cmd(CPM_CR_CH_SCC4, cmd) | CPM_CR_FLG;
+ break;
+ default:
+ return;
+
+ }
+ cp->cp_cpcr = val;
+ while (cp->cp_cpcr & CPM_CR_FLG) ;
+}
+
+void smc1_lineif(struct uart_cpm_port *pinfo)
+{
+ volatile cpm8xx_t *cp = cpmp;
+ unsigned int iobits = 0x000000c0;
+
+ if (!pinfo->is_portb) {
+ cp->cp_pbpar |= iobits;
+ cp->cp_pbdir &= ~iobits;
+ cp->cp_pbodr &= ~iobits;
+ } else {
+ ((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits;
+ ((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
+ ((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
+ }
+
+ pinfo->brg = 1;
+}
+
+void smc2_lineif(struct uart_cpm_port *pinfo)
+{
+ /* XXX SMC2: insert port configuration here */
+ pinfo->brg = 2;
+}
+
+void scc1_lineif(struct uart_cpm_port *pinfo)
+{
+ /* XXX SCC1: insert port configuration here */
+ pinfo->brg = 1;
+}
+
+void scc2_lineif(struct uart_cpm_port *pinfo)
+{
+ /* XXX SCC2: insert port configuration here */
+ pinfo->brg = 2;
+}
+
+void scc3_lineif(struct uart_cpm_port *pinfo)
+{
+ /* XXX SCC3: insert port configuration here */
+ pinfo->brg = 3;
+}
+
+void scc4_lineif(struct uart_cpm_port *pinfo)
+{
+ /* XXX SCC4: insert port configuration here */
+ pinfo->brg = 4;
+}
+
+/*
+ * Allocate DP-Ram and memory buffers. We need to allocate a transmit and
+ * receive buffer descriptors from dual port ram, and a character
+ * buffer area from host mem. If we are allocating for the console we need
+ * to do it from bootmem
+ */
+int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
+{
+ int dpmemsz, memsz;
+ u8 *dp_mem;
+ uint dp_offset;
+ u8 *mem_addr;
+ dma_addr_t dma_addr = 0;
+
+ pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line);
+
+ dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos);
+ dp_offset = cpm_dpalloc(dpmemsz, 8);
+ if (IS_DPERR(dp_offset)) {
+ printk(KERN_ERR
+ "cpm_uart_cpm1.c: could not allocate buffer descriptors\n");
+ return -ENOMEM;
+ }
+ dp_mem = cpm_dpram_addr(dp_offset);
+
+ memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
+ L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
+ if (is_con) {
+ mem_addr = (u8 *) m8xx_cpm_hostalloc(memsz);
+ dma_addr = 0;
+ } else
+ mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
+ GFP_KERNEL);
+
+ if (mem_addr == NULL) {
+ cpm_dpfree(dp_offset);
+ printk(KERN_ERR
+ "cpm_uart_cpm1.c: could not allocate coherent memory\n");
+ return -ENOMEM;
+ }
+
+ pinfo->dp_addr = dp_offset;
+ pinfo->mem_addr = mem_addr;
+ pinfo->dma_addr = dma_addr;
+
+ pinfo->rx_buf = mem_addr;
+ pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
+ * pinfo->rx_fifosize);
+
+ pinfo->rx_bd_base = (volatile cbd_t *)dp_mem;
+ pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;
+
+ return 0;
+}
+
+void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
+{
+ dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
+ pinfo->rx_fifosize) +
+ L1_CACHE_ALIGN(pinfo->tx_nrfifos *
+ pinfo->tx_fifosize), pinfo->mem_addr,
+ pinfo->dma_addr);
+
+ cpm_dpfree(pinfo->dp_addr);
+}
+
+/* Setup any dynamic params in the uart desc */
+int cpm_uart_init_portdesc(void)
+{
+ pr_debug("CPM uart[-]:init portdesc\n");
+
+ cpm_uart_nr = 0;
+#ifdef CONFIG_SERIAL_CPM_SMC1
+ cpm_uart_ports[UART_SMC1].smcp = &cpmp->cp_smc[0];
+/*
+ * Is SMC1 being relocated?
+ */
+# ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
+ cpm_uart_ports[UART_SMC1].smcup =
+ (smc_uart_t *) & cpmp->cp_dparam[0x3C0];
+# else
+ cpm_uart_ports[UART_SMC1].smcup =
+ (smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC1];
+# endif
+ cpm_uart_ports[UART_SMC1].port.mapbase =
+ (unsigned long)&cpmp->cp_smc[0];
+ cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
+ cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+ cpm_uart_ports[UART_SMC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SMC2
+ cpm_uart_ports[UART_SMC2].smcp = &cpmp->cp_smc[1];
+ cpm_uart_ports[UART_SMC2].smcup =
+ (smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC2];
+ cpm_uart_ports[UART_SMC2].port.mapbase =
+ (unsigned long)&cpmp->cp_smc[1];
+ cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
+ cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+ cpm_uart_ports[UART_SMC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC1
+ cpm_uart_ports[UART_SCC1].sccp = &cpmp->cp_scc[0];
+ cpm_uart_ports[UART_SCC1].sccup =
+ (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC1];
+ cpm_uart_ports[UART_SCC1].port.mapbase =
+ (unsigned long)&cpmp->cp_scc[0];
+ cpm_uart_ports[UART_SCC1].sccp->scc_sccm &=
+ ~(UART_SCCM_TX | UART_SCCM_RX);
+ cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &=
+ ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ cpm_uart_ports[UART_SCC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC2
+ cpm_uart_ports[UART_SCC2].sccp = &cpmp->cp_scc[1];
+ cpm_uart_ports[UART_SCC2].sccup =
+ (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC2];
+ cpm_uart_ports[UART_SCC2].port.mapbase =
+ (unsigned long)&cpmp->cp_scc[1];
+ cpm_uart_ports[UART_SCC2].sccp->scc_sccm &=
+ ~(UART_SCCM_TX | UART_SCCM_RX);
+ cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &=
+ ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ cpm_uart_ports[UART_SCC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC3
+ cpm_uart_ports[UART_SCC3].sccp = &cpmp->cp_scc[2];
+ cpm_uart_ports[UART_SCC3].sccup =
+ (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC3];
+ cpm_uart_ports[UART_SCC3].port.mapbase =
+ (unsigned long)&cpmp->cp_scc[2];
+ cpm_uart_ports[UART_SCC3].sccp->scc_sccm &=
+ ~(UART_SCCM_TX | UART_SCCM_RX);
+ cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &=
+ ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ cpm_uart_ports[UART_SCC3].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC4
+ cpm_uart_ports[UART_SCC4].sccp = &cpmp->cp_scc[3];
+ cpm_uart_ports[UART_SCC4].sccup =
+ (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC4];
+ cpm_uart_ports[UART_SCC4].port.mapbase =
+ (unsigned long)&cpmp->cp_scc[3];
+ cpm_uart_ports[UART_SCC4].sccp->scc_sccm &=
+ ~(UART_SCCM_TX | UART_SCCM_RX);
+ cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &=
+ ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ cpm_uart_ports[UART_SCC4].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
+#endif
+ return 0;
+}
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/serial/cpm_uart/cpm_uart_cpm1.h
new file mode 100644
index 000000000000..5d867ab581b7
--- /dev/null
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.h
@@ -0,0 +1,45 @@
+/*
+ * linux/drivers/serial/cpm_uart_cpm1.h
+ *
+ * Driver for CPM (SCC/SMC) serial ports
+ *
+ * definitions for cpm1
+ *
+ */
+
+#ifndef CPM_UART_CPM1_H
+#define CPM_UART_CPM1_H
+
+#include <asm/commproc.h>
+
+/* defines for IRQs */
+#define SMC1_IRQ (CPM_IRQ_OFFSET + CPMVEC_SMC1)
+#define SMC2_IRQ (CPM_IRQ_OFFSET + CPMVEC_SMC2)
+#define SCC1_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC1)
+#define SCC2_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC2)
+#define SCC3_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC3)
+#define SCC4_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC4)
+
+/* the CPM address */
+#define CPM_ADDR IMAP_ADDR
+
+static inline void cpm_set_brg(int brg, int baud)
+{
+ cpm_setbrg(brg, baud);
+}
+
+static inline void cpm_set_scc_fcr(volatile scc_uart_t * sup)
+{
+ sup->scc_genscc.scc_rfcr = SMC_EB;
+ sup->scc_genscc.scc_tfcr = SMC_EB;
+}
+
+static inline void cpm_set_smc_fcr(volatile smc_uart_t * up)
+{
+ up->smc_rfcr = SMC_EB;
+ up->smc_tfcr = SMC_EB;
+}
+
+#define DPRAM_BASE ((unsigned char *)&cpmp->cp_dpmem[0])
+
+#endif
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
new file mode 100644
index 000000000000..b422c3abfba6
--- /dev/null
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -0,0 +1,328 @@
+/*
+ * linux/drivers/serial/cpm_uart_cpm2.c
+ *
+ * Driver for CPM (SCC/SMC) serial ports; CPM2 definitions
+ *
+ * Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2)
+ * Pantelis Antoniou (panto@intracom.gr) (CPM1)
+ *
+ * Copyright (C) 2004 Freescale Semiconductor, Inc.
+ * (C) 2004 Intracom, S.A.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/bootmem.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <linux/serial_core.h>
+#include <linux/kernel.h>
+
+#include "cpm_uart.h"
+
+/**************************************************************/
+
+void cpm_line_cr_cmd(int line, int cmd)
+{
+ volatile cpm_cpm2_t *cp = cpmp;
+ ulong val;
+
+ switch (line) {
+ case UART_SMC1:
+ val = mk_cr_cmd(CPM_CR_SMC1_PAGE, CPM_CR_SMC1_SBLOCK, 0,
+ cmd) | CPM_CR_FLG;
+ break;
+ case UART_SMC2:
+ val = mk_cr_cmd(CPM_CR_SMC2_PAGE, CPM_CR_SMC2_SBLOCK, 0,
+ cmd) | CPM_CR_FLG;
+ break;
+ case UART_SCC1:
+ val = mk_cr_cmd(CPM_CR_SCC1_PAGE, CPM_CR_SCC1_SBLOCK, 0,
+ cmd) | CPM_CR_FLG;
+ break;
+ case UART_SCC2:
+ val = mk_cr_cmd(CPM_CR_SCC2_PAGE, CPM_CR_SCC2_SBLOCK, 0,
+ cmd) | CPM_CR_FLG;
+ break;
+ case UART_SCC3:
+ val = mk_cr_cmd(CPM_CR_SCC3_PAGE, CPM_CR_SCC3_SBLOCK, 0,
+ cmd) | CPM_CR_FLG;
+ break;
+ case UART_SCC4:
+ val = mk_cr_cmd(CPM_CR_SCC4_PAGE, CPM_CR_SCC4_SBLOCK, 0,
+ cmd) | CPM_CR_FLG;
+ break;
+ default:
+ return;
+
+ }
+ cp->cp_cpcr = val;
+ while (cp->cp_cpcr & CPM_CR_FLG) ;
+}
+
+void smc1_lineif(struct uart_cpm_port *pinfo)
+{
+ volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+
+ /* SMC1 is only on port D */
+ io->iop_ppard |= 0x00c00000;
+ io->iop_pdird |= 0x00400000;
+ io->iop_pdird &= ~0x00800000;
+ io->iop_psord &= ~0x00c00000;
+
+ /* Wire BRG1 to SMC1 */
+ cpm2_immr->im_cpmux.cmx_smr &= 0x0f;
+ pinfo->brg = 1;
+}
+
+void smc2_lineif(struct uart_cpm_port *pinfo)
+{
+ volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+
+ /* SMC2 is only on port A */
+ io->iop_ppara |= 0x00c00000;
+ io->iop_pdira |= 0x00400000;
+ io->iop_pdira &= ~0x00800000;
+ io->iop_psora &= ~0x00c00000;
+
+ /* Wire BRG2 to SMC2 */
+ cpm2_immr->im_cpmux.cmx_smr &= 0xf0;
+ pinfo->brg = 2;
+}
+
+void scc1_lineif(struct uart_cpm_port *pinfo)
+{
+ volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+
+ /* Use Port D for SCC1 instead of other functions. */
+ io->iop_ppard |= 0x00000003;
+ io->iop_psord &= ~0x00000001; /* Rx */
+ io->iop_psord |= 0x00000002; /* Tx */
+ io->iop_pdird &= ~0x00000001; /* Rx */
+ io->iop_pdird |= 0x00000002; /* Tx */
+
+ /* Wire BRG1 to SCC1 */
+ cpm2_immr->im_cpmux.cmx_scr &= 0x00ffffff;
+ cpm2_immr->im_cpmux.cmx_scr |= 0x00000000;
+ pinfo->brg = 1;
+}
+
+void scc2_lineif(struct uart_cpm_port *pinfo)
+{
+ volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+ io->iop_pparb |= 0x008b0000;
+ io->iop_pdirb |= 0x00880000;
+ io->iop_psorb |= 0x00880000;
+ io->iop_pdirb &= ~0x00030000;
+ io->iop_psorb &= ~0x00030000;
+ cpm2_immr->im_cpmux.cmx_scr &= 0xff00ffff;
+ cpm2_immr->im_cpmux.cmx_scr |= 0x00090000;
+ pinfo->brg = 2;
+}
+
+void scc3_lineif(struct uart_cpm_port *pinfo)
+{
+ volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+ io->iop_pparb |= 0x008b0000;
+ io->iop_pdirb |= 0x00880000;
+ io->iop_psorb |= 0x00880000;
+ io->iop_pdirb &= ~0x00030000;
+ io->iop_psorb &= ~0x00030000;
+ cpm2_immr->im_cpmux.cmx_scr &= 0xffff00ff;
+ cpm2_immr->im_cpmux.cmx_scr |= 0x00001200;
+ pinfo->brg = 3;
+}
+
+void scc4_lineif(struct uart_cpm_port *pinfo)
+{
+ volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+
+ io->iop_ppard |= 0x00000600;
+ io->iop_psord &= ~0x00000600; /* Tx/Rx */
+ io->iop_pdird &= ~0x00000200; /* Rx */
+ io->iop_pdird |= 0x00000400; /* Tx */
+
+ cpm2_immr->im_cpmux.cmx_scr &= 0xffffff00;
+ cpm2_immr->im_cpmux.cmx_scr |= 0x0000001b;
+ pinfo->brg = 4;
+}
+
+/*
+ * Allocate DP-Ram and memory buffers. We need to allocate a transmit and
+ * receive buffer descriptors from dual port ram, and a character
+ * buffer area from host mem. If we are allocating for the console we need
+ * to do it from bootmem
+ */
+int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
+{
+ int dpmemsz, memsz;
+ u8 *dp_mem;
+ uint dp_offset;
+ u8 *mem_addr;
+ dma_addr_t dma_addr = 0;
+
+ pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line);
+
+ dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos);
+ dp_offset = cpm_dpalloc(dpmemsz, 8);
+ if (IS_DPERR(dp_offset)) {
+ printk(KERN_ERR
+ "cpm_uart_cpm.c: could not allocate buffer descriptors\n");
+ return -ENOMEM;
+ }
+
+ dp_mem = cpm_dpram_addr(dp_offset);
+
+ memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
+ L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
+ if (is_con)
+ mem_addr = alloc_bootmem(memsz);
+ else
+ mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
+ GFP_KERNEL);
+
+ if (mem_addr == NULL) {
+ cpm_dpfree(dp_offset);
+ printk(KERN_ERR
+ "cpm_uart_cpm.c: could not allocate coherent memory\n");
+ return -ENOMEM;
+ }
+
+ pinfo->dp_addr = dp_offset;
+ pinfo->mem_addr = mem_addr;
+ pinfo->dma_addr = dma_addr;
+
+ pinfo->rx_buf = mem_addr;
+ pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
+ * pinfo->rx_fifosize);
+
+ pinfo->rx_bd_base = (volatile cbd_t *)dp_mem;
+ pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;
+
+ return 0;
+}
+
+void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
+{
+ dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
+ pinfo->rx_fifosize) +
+ L1_CACHE_ALIGN(pinfo->tx_nrfifos *
+ pinfo->tx_fifosize), pinfo->mem_addr,
+ pinfo->dma_addr);
+
+ cpm_dpfree(pinfo->dp_addr);
+}
+
+/* Setup any dynamic params in the uart desc */
+int cpm_uart_init_portdesc(void)
+{
+ pr_debug("CPM uart[-]:init portdesc\n");
+
+ cpm_uart_nr = 0;
+#ifdef CONFIG_SERIAL_CPM_SMC1
+ cpm_uart_ports[UART_SMC1].smcp = (smc_t *) & cpm2_immr->im_smc[0];
+ cpm_uart_ports[UART_SMC1].smcup =
+ (smc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SMC1];
+ cpm_uart_ports[UART_SMC1].port.mapbase =
+ (unsigned long)&cpm2_immr->im_smc[0];
+ cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
+ cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+ cpm_uart_ports[UART_SMC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SMC2
+ cpm_uart_ports[UART_SMC2].smcp = (smc_t *) & cpm2_immr->im_smc[1];
+ cpm_uart_ports[UART_SMC2].smcup =
+ (smc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SMC2];
+ cpm_uart_ports[UART_SMC2].port.mapbase =
+ (unsigned long)&cpm2_immr->im_smc[1];
+ cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
+ cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+ cpm_uart_ports[UART_SMC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC1
+ cpm_uart_ports[UART_SCC1].sccp = (scc_t *) & cpm2_immr->im_scc[0];
+ cpm_uart_ports[UART_SCC1].sccup =
+ (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC1];
+ cpm_uart_ports[UART_SCC1].port.mapbase =
+ (unsigned long)&cpm2_immr->im_scc[0];
+ cpm_uart_ports[UART_SCC1].sccp->scc_sccm &=
+ ~(UART_SCCM_TX | UART_SCCM_RX);
+ cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &=
+ ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ cpm_uart_ports[UART_SCC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC2
+ cpm_uart_ports[UART_SCC2].sccp = (scc_t *) & cpm2_immr->im_scc[1];
+ cpm_uart_ports[UART_SCC2].sccup =
+ (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC2];
+ cpm_uart_ports[UART_SCC2].port.mapbase =
+ (unsigned long)&cpm2_immr->im_scc[1];
+ cpm_uart_ports[UART_SCC2].sccp->scc_sccm &=
+ ~(UART_SCCM_TX | UART_SCCM_RX);
+ cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &=
+ ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ cpm_uart_ports[UART_SCC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC3
+ cpm_uart_ports[UART_SCC3].sccp = (scc_t *) & cpm2_immr->im_scc[2];
+ cpm_uart_ports[UART_SCC3].sccup =
+ (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC3];
+ cpm_uart_ports[UART_SCC3].port.mapbase =
+ (unsigned long)&cpm2_immr->im_scc[2];
+ cpm_uart_ports[UART_SCC3].sccp->scc_sccm &=
+ ~(UART_SCCM_TX | UART_SCCM_RX);
+ cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &=
+ ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ cpm_uart_ports[UART_SCC3].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC4
+ cpm_uart_ports[UART_SCC4].sccp = (scc_t *) & cpm2_immr->im_scc[3];
+ cpm_uart_ports[UART_SCC4].sccup =
+ (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC4];
+ cpm_uart_ports[UART_SCC4].port.mapbase =
+ (unsigned long)&cpm2_immr->im_scc[3];
+ cpm_uart_ports[UART_SCC4].sccp->scc_sccm &=
+ ~(UART_SCCM_TX | UART_SCCM_RX);
+ cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &=
+ ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ cpm_uart_ports[UART_SCC4].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
+#endif
+
+ return 0;
+}
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/serial/cpm_uart/cpm_uart_cpm2.h
new file mode 100644
index 000000000000..4793fecf8ece
--- /dev/null
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.h
@@ -0,0 +1,45 @@
+/*
+ * linux/drivers/serial/cpm_uart_cpm2.h
+ *
+ * Driver for CPM (SCC/SMC) serial ports
+ *
+ * definitions for cpm2
+ *
+ */
+
+#ifndef CPM_UART_CPM2_H
+#define CPM_UART_CPM2_H
+
+#include <asm/cpm2.h>
+
+/* defines for IRQs */
+#define SMC1_IRQ SIU_INT_SMC1
+#define SMC2_IRQ SIU_INT_SMC2
+#define SCC1_IRQ SIU_INT_SCC1
+#define SCC2_IRQ SIU_INT_SCC2
+#define SCC3_IRQ SIU_INT_SCC3
+#define SCC4_IRQ SIU_INT_SCC4
+
+/* the CPM address */
+#define CPM_ADDR CPM_MAP_ADDR
+
+static inline void cpm_set_brg(int brg, int baud)
+{
+ cpm_setbrg(brg, baud);
+}
+
+static inline void cpm_set_scc_fcr(volatile scc_uart_t * sup)
+{
+ sup->scc_genscc.scc_rfcr = CPMFCR_GBL | CPMFCR_EB;
+ sup->scc_genscc.scc_tfcr = CPMFCR_GBL | CPMFCR_EB;
+}
+
+static inline void cpm_set_smc_fcr(volatile smc_uart_t * up)
+{
+ up->smc_rfcr = CPMFCR_GBL | CPMFCR_EB;
+ up->smc_tfcr = CPMFCR_GBL | CPMFCR_EB;
+}
+
+#define DPRAM_BASE ((unsigned char *)&cpm2_immr->im_dprambase[0])
+
+#endif