summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
diff options
context:
space:
mode:
authorDon Brace <don.brace@microsemi.com>2016-07-01 13:37:31 -0500
committerMartin K. Petersen <martin.petersen@oracle.com>2016-07-15 15:40:39 -0400
commit64ce60cab24603ac0fcd59c9fbc3be78f4c4d229 (patch)
treec45c5bc174ed56461c455b22c90c0735068d321a /drivers/scsi
parent094f71c70b5c25176709081cedda23228a0d82ab (diff)
downloadlinux-64ce60cab24603ac0fcd59c9fbc3be78f4c4d229.tar.bz2
hpsa: correct skipping masked peripherals
The SA controller spins down RAID drive spares. A REGNEWD event causes an inquiry to be sent to all physical drives. This causes the SA controller to spin up the spare. The controller suspends all I/O to a logical volume until the spare is spun up. The spin-up can take over 50 seconds. This can result in one or both of the following: - SML sends down aborts and resets to the logical volume and can cause the logical volume to be off-lined. - a negative impact on the logical volume's I/O performance each time a REGNEWD is triggered. Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/hpsa.c79
1 files changed, 74 insertions, 5 deletions
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index ff8dcd5b0631..375a39632a7a 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -4105,6 +4105,70 @@ static int hpsa_set_local_logical_count(struct ctlr_info *h,
return rc;
}
+static bool hpsa_is_disk_spare(struct ctlr_info *h, u8 *lunaddrbytes)
+{
+ struct bmic_identify_physical_device *id_phys;
+ bool is_spare = false;
+ int rc;
+
+ id_phys = kzalloc(sizeof(*id_phys), GFP_KERNEL);
+ if (!id_phys)
+ return false;
+
+ rc = hpsa_bmic_id_physical_device(h,
+ lunaddrbytes,
+ GET_BMIC_DRIVE_NUMBER(lunaddrbytes),
+ id_phys, sizeof(*id_phys));
+ if (rc == 0)
+ is_spare = (id_phys->more_flags >> 6) & 0x01;
+
+ kfree(id_phys);
+ return is_spare;
+}
+
+#define RPL_DEV_FLAG_NON_DISK 0x1
+#define RPL_DEV_FLAG_UNCONFIG_DISK_REPORTING_SUPPORTED 0x2
+#define RPL_DEV_FLAG_UNCONFIG_DISK 0x4
+
+#define BMIC_DEVICE_TYPE_ENCLOSURE 6
+
+static bool hpsa_skip_device(struct ctlr_info *h, u8 *lunaddrbytes,
+ struct ext_report_lun_entry *rle)
+{
+ u8 device_flags;
+ u8 device_type;
+
+ if (!MASKED_DEVICE(lunaddrbytes))
+ return false;
+
+ device_flags = rle->device_flags;
+ device_type = rle->device_type;
+
+ if (device_flags & RPL_DEV_FLAG_NON_DISK) {
+ if (device_type == BMIC_DEVICE_TYPE_ENCLOSURE)
+ return false;
+ return true;
+ }
+
+ if (!(device_flags & RPL_DEV_FLAG_UNCONFIG_DISK_REPORTING_SUPPORTED))
+ return false;
+
+ if (device_flags & RPL_DEV_FLAG_UNCONFIG_DISK)
+ return false;
+
+ /*
+ * Spares may be spun down, we do not want to
+ * do an Inquiry to a RAID set spare drive as
+ * that would have them spun up, that is a
+ * performance hit because I/O to the RAID device
+ * stops while the spin up occurs which can take
+ * over 50 seconds.
+ */
+ if (hpsa_is_disk_spare(h, lunaddrbytes))
+ return true;
+
+ return false;
+}
static void hpsa_update_scsi_devices(struct ctlr_info *h)
{
@@ -4198,6 +4262,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
u8 *lunaddrbytes, is_OBDR = 0;
int rc = 0;
int phys_dev_index = i - (raid_ctlr_position == 0);
+ bool skip_device = false;
physical_device = i < nphysicals + (raid_ctlr_position == 0);
@@ -4205,11 +4270,15 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position,
i, nphysicals, nlogicals, physdev_list, logdev_list);
- /* skip masked non-disk devices */
- if (MASKED_DEVICE(lunaddrbytes) && physical_device &&
- (physdev_list->LUN[phys_dev_index].device_type != 0x06) &&
- (physdev_list->LUN[phys_dev_index].device_flags & 0x01))
- continue;
+ /*
+ * Skip over some devices such as a spare.
+ */
+ if (!tmpdevice->external && physical_device) {
+ skip_device = hpsa_skip_device(h, lunaddrbytes,
+ &physdev_list->LUN[phys_dev_index]);
+ if (skip_device)
+ continue;
+ }
/* Get device type, vendor, model, device id */
rc = hpsa_update_device_info(h, lunaddrbytes, tmpdevice,