scsi: qla2xxx: Fix N2N and NVMe connect retry failure

FC-NVMe target discovery failed when initiator wwpn < target wwpn in an N2N
(Direct Attach) config, where the driver was stuck on FCP PRLI mode and
failed to retry with NVMe PRLI.

Link: https://lore.kernel.org/r/20201202132312.19966-10-njavali@marvell.com
Fixes: 84ed362ac40c ("scsi: qla2xxx: Dual FCP-NVMe target port support”)
Fixes: 983f127603fa ("scsi: qla2xxx: Retry PLOGI on FC-NVMe PRLI failure”)
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 52 insertions, 19 deletions

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 5626e9b6949f..12e3b05baf41 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1268,9 +1268,10 @@ qla24xx_async_prli(struct scsi_qla_host *vha, fc_port_t *fcport)
 		lio->u.logio.flags |= SRB_LOGIN_NVME_PRLI;
 
 	ql_dbg(ql_dbg_disc, vha, 0x211b,
-	    "Async-prli - %8phC hdl=%x, loopid=%x portid=%06x retries=%d %s.\n",
+	    "Async-prli - %8phC hdl=%x, loopid=%x portid=%06x retries=%d fc4type %x priority %x %s.\n",
 	    fcport->port_name, sp->handle, fcport->loop_id, fcport->d_id.b24,
-	    fcport->login_retry, NVME_TARGET(vha->hw, fcport) ? "nvme" : "fc");
+	    fcport->login_retry, fcport->fc4_type, vha->hw->fc4_type_priority,
+	    NVME_TARGET(vha->hw, fcport) ? "nvme" : "fcp");
 
 	rval = qla2x00_start_sp(sp);
 	if (rval != QLA_SUCCESS) {
@@ -1932,26 +1933,58 @@ qla24xx_handle_prli_done_event(struct scsi_qla_host *vha, struct event_arg *ea)
 			break;
 		}
 
-		/*
-		 * Retry PRLI with other FC-4 type if failure occurred on dual
-		 * FCP/NVMe port
-		 */
-		if (NVME_FCP_TARGET(ea->fcport)) {
-			ql_dbg(ql_dbg_disc, vha, 0x2118,
-				"%s %d %8phC post %s prli\n",
-				__func__, __LINE__, ea->fcport->port_name,
-				(ea->fcport->fc4_type & FS_FC4TYPE_NVME) ?
-				"NVMe" : "FCP");
-			if (vha->hw->fc4_type_priority == FC4_PRIORITY_NVME)
+		ql_dbg(ql_dbg_disc, vha, 0x2118,
+		       "%s %d %8phC priority %s, fc4type %x\n",
+		       __func__, __LINE__, ea->fcport->port_name,
+		       vha->hw->fc4_type_priority == FC4_PRIORITY_FCP ?
+		       "FCP" : "NVMe", ea->fcport->fc4_type);
+
+		if (N2N_TOPO(vha->hw)) {
+			if (vha->hw->fc4_type_priority == FC4_PRIORITY_NVME) {
 				ea->fcport->fc4_type &= ~FS_FC4TYPE_NVME;
-			else
+				ea->fcport->fc4_type |= FS_FC4TYPE_FCP;
+			} else {
 				ea->fcport->fc4_type &= ~FS_FC4TYPE_FCP;
-		}
+				ea->fcport->fc4_type |= FS_FC4TYPE_NVME;
+			}
 
-		ea->fcport->flags &= ~FCF_ASYNC_SENT;
-		ea->fcport->keep_nport_handle = 0;
-		ea->fcport->logout_on_delete = 1;
-		qlt_schedule_sess_for_deletion(ea->fcport);
+			if (ea->fcport->n2n_link_reset_cnt < 3) {
+				ea->fcport->n2n_link_reset_cnt++;
+				vha->relogin_jif = jiffies + 2 * HZ;
+				/*
+				 * PRLI failed. Reset link to kick start
+				 * state machine
+				 */
+				set_bit(N2N_LINK_RESET, &vha->dpc_flags);
+			} else {
+				ql_log(ql_log_warn, vha, 0x2119,
+				       "%s %d %8phC Unable to reconnect\n",
+				       __func__, __LINE__,
+				       ea->fcport->port_name);
+			}
+		} else {
+			/*
+			 * switch connect. login failed. Take connection down
+			 * and allow relogin to retrigger
+			 */
+			if (NVME_FCP_TARGET(ea->fcport)) {
+				ql_dbg(ql_dbg_disc, vha, 0x2118,
+				       "%s %d %8phC post %s prli\n",
+				       __func__, __LINE__,
+				       ea->fcport->port_name,
+				       (ea->fcport->fc4_type & FS_FC4TYPE_NVME)
+				       ? "NVMe" : "FCP");
+				if (vha->hw->fc4_type_priority == FC4_PRIORITY_NVME)
+					ea->fcport->fc4_type &= ~FS_FC4TYPE_NVME;
+				else
+					ea->fcport->fc4_type &= ~FS_FC4TYPE_FCP;
+			}
+
+			ea->fcport->flags &= ~FCF_ASYNC_SENT;
+			ea->fcport->keep_nport_handle = 0;
+			ea->fcport->logout_on_delete = 1;
+			qlt_schedule_sess_for_deletion(ea->fcport);
+		}
 		break;
 	}
 }