Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (40 commits)
  [SCSI] 3w-9xxx fix bug in sgl loading
  [SCSI] fcoe, libfc: adds enable/disable for fcoe interface
  [SCSI] libfc: reduce hold time on SCSI host lock
  [SCSI] libfc: remote port gets stuck in restart state without really restarting
  [SCSI] pm8001: misc code cleanup
  [SCSI] pm8001: enable read HBA SAS address from VPD
  [SCSI] pm8001: do not reset local sata as it will not be found if reset
  [SCSI] pm8001: bit set pm8001_ha->flags
  [SCSI] pm8001:fix potential NULL pointer dereference
  [SCSI] pm8001: set SSC down-spreading only to get less errors on some 6G device.
  [SCSI] pm8001: fix endian issues with SAS address
  [SCSI] pm8001: enhance error handle for IO patch
  [SCSI] pm8001: Fix for sata io circular lock dependency.
  [SCSI] hpsa: add driver for HP Smart Array controllers.
  [SCSI] cxgb3i: always use negative errno in case of error
  [SCSI] bnx2i: minor code cleanup and update driver version
  [SCSI] bnx2i: Task management ABORT TASK fixes
  [SCSI] bnx2i: update CQ arming algorith for 5771x chipsets
  [SCSI] bnx2i: Adjust sq_size module parametr to power of 2 only if a non-zero value is specified
  [SCSI] bnx2i: Add 5771E device support to bnx2i driver
  ...

1 files changed, 326 insertions, 0 deletions

diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
new file mode 100644
index 000000000000..12d71387ed9a
--- /dev/null
+++ b/drivers/scsi/hpsa_cmd.h
@@ -0,0 +1,326 @@
+/*
+ *    Disk Array driver for HP Smart Array SAS controllers
+ *    Copyright 2000, 2009 Hewlett-Packard Development Company, L.P.
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; version 2 of the License.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *    NON INFRINGEMENT.  See the GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *    Questions/Comments/Bugfixes to iss_storagedev@hp.com
+ *
+ */
+#ifndef HPSA_CMD_H
+#define HPSA_CMD_H
+
+/* general boundary defintions */
+#define SENSEINFOBYTES          32 /* may vary between hbas */
+#define MAXSGENTRIES            31
+#define MAXREPLYQS              256
+
+/* Command Status value */
+#define CMD_SUCCESS             0x0000
+#define CMD_TARGET_STATUS       0x0001
+#define CMD_DATA_UNDERRUN       0x0002
+#define CMD_DATA_OVERRUN        0x0003
+#define CMD_INVALID             0x0004
+#define CMD_PROTOCOL_ERR        0x0005
+#define CMD_HARDWARE_ERR        0x0006
+#define CMD_CONNECTION_LOST     0x0007
+#define CMD_ABORTED             0x0008
+#define CMD_ABORT_FAILED        0x0009
+#define CMD_UNSOLICITED_ABORT   0x000A
+#define CMD_TIMEOUT             0x000B
+#define CMD_UNABORTABLE		0x000C
+
+/* Unit Attentions ASC's as defined for the MSA2012sa */
+#define POWER_OR_RESET			0x29
+#define STATE_CHANGED			0x2a
+#define UNIT_ATTENTION_CLEARED		0x2f
+#define LUN_FAILED			0x3e
+#define REPORT_LUNS_CHANGED		0x3f
+
+/* Unit Attentions ASCQ's as defined for the MSA2012sa */
+
+	/* These ASCQ's defined for ASC = POWER_OR_RESET */
+#define POWER_ON_RESET			0x00
+#define POWER_ON_REBOOT			0x01
+#define SCSI_BUS_RESET			0x02
+#define MSA_TARGET_RESET		0x03
+#define CONTROLLER_FAILOVER		0x04
+#define TRANSCEIVER_SE			0x05
+#define TRANSCEIVER_LVD			0x06
+
+	/* These ASCQ's defined for ASC = STATE_CHANGED */
+#define RESERVATION_PREEMPTED		0x03
+#define ASYM_ACCESS_CHANGED		0x06
+#define LUN_CAPACITY_CHANGED		0x09
+
+/* transfer direction */
+#define XFER_NONE               0x00
+#define XFER_WRITE              0x01
+#define XFER_READ               0x02
+#define XFER_RSVD               0x03
+
+/* task attribute */
+#define ATTR_UNTAGGED           0x00
+#define ATTR_SIMPLE             0x04
+#define ATTR_HEADOFQUEUE        0x05
+#define ATTR_ORDERED            0x06
+#define ATTR_ACA                0x07
+
+/* cdb type */
+#define TYPE_CMD				0x00
+#define TYPE_MSG				0x01
+
+/* config space register offsets */
+#define CFG_VENDORID            0x00
+#define CFG_DEVICEID            0x02
+#define CFG_I2OBAR              0x10
+#define CFG_MEM1BAR             0x14
+
+/* i2o space register offsets */
+#define I2O_IBDB_SET            0x20
+#define I2O_IBDB_CLEAR          0x70
+#define I2O_INT_STATUS          0x30
+#define I2O_INT_MASK            0x34
+#define I2O_IBPOST_Q            0x40
+#define I2O_OBPOST_Q            0x44
+#define I2O_DMA1_CFG		0x214
+
+/* Configuration Table */
+#define CFGTBL_ChangeReq        0x00000001l
+#define CFGTBL_AccCmds          0x00000001l
+
+#define CFGTBL_Trans_Simple     0x00000002l
+
+#define CFGTBL_BusType_Ultra2   0x00000001l
+#define CFGTBL_BusType_Ultra3   0x00000002l
+#define CFGTBL_BusType_Fibre1G  0x00000100l
+#define CFGTBL_BusType_Fibre2G  0x00000200l
+struct vals32 {
+	__u32   lower;
+	__u32   upper;
+};
+
+union u64bit {
+	struct vals32 val32;
+	__u64 val;
+};
+
+/* FIXME this is a per controller value (barf!) */
+#define HPSA_MAX_TARGETS_PER_CTLR 16
+#define HPSA_MAX_LUN 256
+#define HPSA_MAX_PHYS_LUN 1024
+
+/* SCSI-3 Commands */
+#pragma pack(1)
+
+#define HPSA_INQUIRY 0x12
+struct InquiryData {
+	__u8 data_byte[36];
+};
+
+#define HPSA_REPORT_LOG 0xc2    /* Report Logical LUNs */
+#define HPSA_REPORT_PHYS 0xc3   /* Report Physical LUNs */
+struct ReportLUNdata {
+	__u8 LUNListLength[4];
+	__u32 reserved;
+	__u8 LUN[HPSA_MAX_LUN][8];
+};
+
+struct ReportExtendedLUNdata {
+	__u8 LUNListLength[4];
+	__u8 extended_response_flag;
+	__u8 reserved[3];
+	__u8 LUN[HPSA_MAX_LUN][24];
+};
+
+struct SenseSubsystem_info {
+	__u8 reserved[36];
+	__u8 portname[8];
+	__u8 reserved1[1108];
+};
+
+#define HPSA_READ_CAPACITY 0x25 /* Read Capacity */
+struct ReadCapdata {
+	__u8 total_size[4];	/* Total size in blocks */
+	__u8 block_size[4];	/* Size of blocks in bytes */
+};
+
+#if 0
+/* 12 byte commands not implemented in firmware yet. */
+#define HPSA_READ 	0xa8
+#define HPSA_WRITE	0xaa
+#endif
+
+#define HPSA_READ   0x28    /* Read(10) */
+#define HPSA_WRITE  0x2a    /* Write(10) */
+
+/* BMIC commands */
+#define BMIC_READ 0x26
+#define BMIC_WRITE 0x27
+#define BMIC_CACHE_FLUSH 0xc2
+#define HPSA_CACHE_FLUSH 0x01	/* C2 was already being used by HPSA */
+
+/* Command List Structure */
+union SCSI3Addr {
+	struct {
+		__u8 Dev;
+		__u8 Bus:6;
+		__u8 Mode:2;        /* b00 */
+	} PeripDev;
+	struct {
+		__u8 DevLSB;
+		__u8 DevMSB:6;
+		__u8 Mode:2;        /* b01 */
+	} LogDev;
+	struct {
+		__u8 Dev:5;
+		__u8 Bus:3;
+		__u8 Targ:6;
+		__u8 Mode:2;        /* b10 */
+	} LogUnit;
+};
+
+struct PhysDevAddr {
+	__u32             TargetId:24;
+	__u32             Bus:6;
+	__u32             Mode:2;
+	/* 2 level target device addr */
+	union SCSI3Addr  Target[2];
+};
+
+struct LogDevAddr {
+	__u32            VolId:30;
+	__u32            Mode:2;
+	__u8             reserved[4];
+};
+
+union LUNAddr {
+	__u8               LunAddrBytes[8];
+	union SCSI3Addr    SCSI3Lun[4];
+	struct PhysDevAddr PhysDev;
+	struct LogDevAddr  LogDev;
+};
+
+struct CommandListHeader {
+	__u8              ReplyQueue;
+	__u8              SGList;
+	__u16             SGTotal;
+	struct vals32     Tag;
+	union LUNAddr     LUN;
+};
+
+struct RequestBlock {
+	__u8   CDBLen;
+	struct {
+		__u8 Type:3;
+		__u8 Attribute:3;
+		__u8 Direction:2;
+	} Type;
+	__u16  Timeout;
+	__u8   CDB[16];
+};
+
+struct ErrDescriptor {
+	struct vals32 Addr;
+	__u32  Len;
+};
+
+struct SGDescriptor {
+	struct vals32 Addr;
+	__u32  Len;
+	__u32  Ext;
+};
+
+union MoreErrInfo {
+	struct {
+		__u8  Reserved[3];
+		__u8  Type;
+		__u32 ErrorInfo;
+	} Common_Info;
+	struct {
+		__u8  Reserved[2];
+		__u8  offense_size; /* size of offending entry */
+		__u8  offense_num;  /* byte # of offense 0-base */
+		__u32 offense_value;
+	} Invalid_Cmd;
+};
+struct ErrorInfo {
+	__u8               ScsiStatus;
+	__u8               SenseLen;
+	__u16              CommandStatus;
+	__u32              ResidualCnt;
+	union MoreErrInfo  MoreErrInfo;
+	__u8               SenseInfo[SENSEINFOBYTES];
+};
+/* Command types */
+#define CMD_IOCTL_PEND  0x01
+#define CMD_SCSI	0x03
+
+struct ctlr_info; /* defined in hpsa.h */
+/* The size of this structure needs to be divisible by 8
+ * od on all architectures, because the controller uses 2
+ * lower bits of the address, and the driver uses 1 lower
+ * bit (3 bits total.)
+ */
+struct CommandList {
+	struct CommandListHeader Header;
+	struct RequestBlock      Request;
+	struct ErrDescriptor     ErrDesc;
+	struct SGDescriptor      SG[MAXSGENTRIES];
+	/* information associated with the command */
+	__u32			   busaddr; /* physical addr of this record */
+	struct ErrorInfo *err_info; /* pointer to the allocated mem */
+	struct ctlr_info	   *h;
+	int			   cmd_type;
+	long			   cmdindex;
+	struct hlist_node list;
+	struct CommandList *prev;
+	struct CommandList *next;
+	struct request *rq;
+	struct completion *waiting;
+	int	 retry_count;
+	void   *scsi_cmd;
+};
+
+/* Configuration Table Structure */
+struct HostWrite {
+	__u32 TransportRequest;
+	__u32 Reserved;
+	__u32 CoalIntDelay;
+	__u32 CoalIntCount;
+};
+
+struct CfgTable {
+	__u8             Signature[4];
+	__u32            SpecValence;
+	__u32            TransportSupport;
+	__u32            TransportActive;
+	struct HostWrite HostWrite;
+	__u32            CmdsOutMax;
+	__u32            BusTypes;
+	__u32            Reserved;
+	__u8             ServerName[16];
+	__u32            HeartBeat;
+	__u32            SCSI_Prefetch;
+};
+
+struct hpsa_pci_info {
+	unsigned char	bus;
+	unsigned char	dev_fn;
+	unsigned short	domain;
+	__u32		board_id;
+};
+
+#pragma pack()
+#endif /* HPSA_CMD_H */