scsi: hisi_sas: add some print to enhance debugging

Add some print at some places such as error info and cq of exception IO,
device found etc, and also adjust some log levels.

All this to assist debugging ability.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 19 insertions, 5 deletions

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index cd9cd8468829..8d6886a452ef 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -2361,6 +2361,7 @@ slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot)
 	ts->resp = SAS_TASK_COMPLETE;
 
 	if (unlikely(aborted)) {
+		dev_dbg(dev, "slot_complete: task(%p) aborted\n", task);
 		ts->stat = SAS_ABORTED_TASK;
 		spin_lock_irqsave(&hisi_hba->lock, flags);
 		hisi_sas_slot_task_free(hisi_hba, task, slot);
@@ -2405,6 +2406,7 @@ slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot)
 		(!(complete_hdr->dw0 & CMPLT_HDR_RSPNS_XFRD_MSK))) {
 		u32 err_phase = (complete_hdr->dw0 & CMPLT_HDR_ERR_PHASE_MSK)
 				>> CMPLT_HDR_ERR_PHASE_OFF;
+		u32 *error_info = hisi_sas_status_buf_addr_mem(slot);
 
 		/* Analyse error happens on which phase TX or RX */
 		if (ERR_ON_TX_PHASE(err_phase))
@@ -2412,6 +2414,16 @@ slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot)
 		else if (ERR_ON_RX_PHASE(err_phase))
 			slot_err_v2_hw(hisi_hba, task, slot, 2);
 
+		if (ts->stat != SAS_DATA_UNDERRUN)
+			dev_info(dev, "erroneous completion iptt=%d task=%p "
+				"CQ hdr: 0x%x 0x%x 0x%x 0x%x "
+				"Error info: 0x%x 0x%x 0x%x 0x%x\n",
+				slot->idx, task,
+				complete_hdr->dw0, complete_hdr->dw1,
+				complete_hdr->act, complete_hdr->dw3,
+				error_info[0], error_info[1],
+				error_info[2], error_info[3]);
+
 		if (unlikely(slot->abort))
 			return ts->stat;
 		goto out;
@@ -2461,7 +2473,7 @@ slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot)
 	}
 
 	if (!slot->port->port_attached) {
-		dev_err(dev, "slot complete: port %d has removed\n",
+		dev_warn(dev, "slot complete: port %d has removed\n",
 			slot->port->sas_port.id);
 		ts->stat = SAS_PHY_DOWN;
 	}
@@ -2718,10 +2730,12 @@ static int phy_down_v2_hw(int phy_no, struct hisi_hba *hisi_hba)
 	u32 phy_state, sl_ctrl, txid_auto;
 	struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
 	struct hisi_sas_port *port = phy->port;
+	struct device *dev = hisi_hba->dev;
 
 	hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_NOT_RDY_MSK, 1);
 
 	phy_state = hisi_sas_read32(hisi_hba, PHY_STATE);
+	dev_info(dev, "phydown: phy%d phy_state=0x%x\n", phy_no, phy_state);
 	hisi_sas_phy_down(hisi_hba, phy_no, (phy_state & 1 << phy_no) ? 1 : 0);
 
 	sl_ctrl = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL);
@@ -2911,7 +2925,7 @@ static void multi_bit_ecc_error_process_v2_hw(struct hisi_hba *hisi_hba,
 			val = hisi_sas_read32(hisi_hba, ecc_error->reg);
 			val &= ecc_error->msk;
 			val >>= ecc_error->shift;
-			dev_warn(dev, ecc_error->msg, irq_value, val);
+			dev_err(dev, ecc_error->msg, irq_value, val);
 			queue_work(hisi_hba->wq, &hisi_hba->rst_work);
 		}
 	}
@@ -3020,12 +3034,12 @@ static irqreturn_t fatal_axi_int_v2_hw(int irq_no, void *p)
 			for (; sub->msk || sub->msg; sub++) {
 				if (!(err_value & sub->msk))
 					continue;
-				dev_warn(dev, "%s (0x%x) found!\n",
+				dev_err(dev, "%s (0x%x) found!\n",
 					 sub->msg, irq_value);
 				queue_work(hisi_hba->wq, &hisi_hba->rst_work);
 			}
 		} else {
-			dev_warn(dev, "%s (0x%x) found!\n",
+			dev_err(dev, "%s (0x%x) found!\n",
 				 axi_error->msg, irq_value);
 			queue_work(hisi_hba->wq, &hisi_hba->rst_work);
 		}
@@ -3397,7 +3411,7 @@ static int soft_reset_v2_hw(struct hisi_hba *hisi_hba)
 
 		udelay(10);
 		if (cnt++ > 10) {
-			dev_info(dev, "wait axi bus state to idle timeout!\n");
+			dev_err(dev, "wait axi bus state to idle timeout!\n");
 			return -1;
 		}
 	}