Merge tag 'driver-core-3.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core __dev* removal patches - take 3 - from Greg Kroah-Hartman:
 "Here are the remaining __dev* removal patches against the 3.8-rc2
  tree.  All of these patches were previously sent to the subsystem
  maintainers, most of them were picked up and pushed to you, but there
  were a number that fell through the cracks, and new drivers were added
  during the merge window, so this series cleans up the rest of the
  instances of these markings.

  Third time's the charm...

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed up trivial conflict with the pinctrl pull in pinctrl-sirf.c.

* tag 'driver-core-3.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
  misc: remove __dev* attributes.
  include: remove __dev* attributes.
  Documentation: remove __dev* attributes.
  Drivers: misc: remove __dev* attributes.
  Drivers: block: remove __dev* attributes.
  Drivers: bcma: remove __dev* attributes.
  Drivers: char: remove __dev* attributes.
  Drivers: clocksource: remove __dev* attributes.
  Drivers: ssb: remove __dev* attributes.
  Drivers: dma: remove __dev* attributes.
  Drivers: gpu: remove __dev* attributes.
  Drivers: infinband: remove __dev* attributes.
  Drivers: memory: remove __dev* attributes.
  Drivers: mmc: remove __dev* attributes.
  Drivers: iommu: remove __dev* attributes.
  Drivers: power: remove __dev* attributes.
  Drivers: message: remove __dev* attributes.
  Drivers: macintosh: remove __dev* attributes.
  Drivers: mfd: remove __dev* attributes.
  pstore: remove __dev* attributes.
  ...

1 files changed, 25 insertions, 26 deletions

diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 13aeca3d51f2..865c64fa923c 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -489,7 +489,7 @@ struct ParameterData {
 	int def;		/* default value */
 	int safe;		/* safe value */
 };
-static struct ParameterData __devinitdata cfg_data[] = {
+static struct ParameterData cfg_data[] = {
 	{ /* adapter id */
 		CFG_PARAM_UNSET,
 		0,
@@ -574,7 +574,7 @@ MODULE_PARM_DESC(reset_delay, "Reset delay in seconds. Default 1 (0-180)");
  * set_safe_settings - if the use_safe_settings option is set then
  * set all values to the safe and slow values.
  **/
-static void __devinit set_safe_settings(void)
+static void set_safe_settings(void)
 {
 	if (use_safe_settings)
 	{
@@ -593,7 +593,7 @@ static void __devinit set_safe_settings(void)
  * fix_settings - reset any boot parameters which are out of range
  * back to the default values.
  **/
-static void __devinit fix_settings(void)
+static void fix_settings(void)
 {
 	int i;
 
@@ -620,7 +620,7 @@ static void __devinit fix_settings(void)
  * Mapping from the eeprom delay index value (index into this array)
  * to the number of actual seconds that the delay should be for.
  */
-static char __devinitdata eeprom_index_to_delay_map[] = 
+static char eeprom_index_to_delay_map[] =
 	{ 1, 3, 5, 10, 16, 30, 60, 120 };
 
 
@@ -630,7 +630,7 @@ static char __devinitdata eeprom_index_to_delay_map[] =
  *
  * @eeprom: The eeprom structure in which we find the delay index to map.
  **/
-static void __devinit eeprom_index_to_delay(struct NvRamType *eeprom)
+static void eeprom_index_to_delay(struct NvRamType *eeprom)
 {
 	eeprom->delay_time = eeprom_index_to_delay_map[eeprom->delay_time];
 }
@@ -643,7 +643,7 @@ static void __devinit eeprom_index_to_delay(struct NvRamType *eeprom)
  *
  * @delay: The delay, in seconds, to find the eeprom index for.
  **/
-static int __devinit delay_to_eeprom_index(int delay)
+static int delay_to_eeprom_index(int delay)
 {
 	u8 idx = 0;
 	while (idx < 7 && eeprom_index_to_delay_map[idx] < delay)
@@ -659,7 +659,7 @@ static int __devinit delay_to_eeprom_index(int delay)
  *
  * @eeprom: The eeprom data to override with command line options.
  **/
-static void __devinit eeprom_override(struct NvRamType *eeprom)
+static void eeprom_override(struct NvRamType *eeprom)
 {
 	u8 id;
 
@@ -3938,7 +3938,7 @@ static void dc395x_slave_destroy(struct scsi_device *scsi_device)
  *
  * @io_port: base I/O address
  **/
-static void __devinit trms1040_wait_30us(unsigned long io_port)
+static void trms1040_wait_30us(unsigned long io_port)
 {
 	/* ScsiPortStallExecution(30); wait 30 us */
 	outb(5, io_port + TRM_S1040_GEN_TIMER);
@@ -3955,7 +3955,7 @@ static void __devinit trms1040_wait_30us(unsigned long io_port)
  * @cmd:	SB + op code (command) to send
  * @addr:	address to send
  **/
-static void __devinit trms1040_write_cmd(unsigned long io_port, u8 cmd, u8 addr)
+static void trms1040_write_cmd(unsigned long io_port, u8 cmd, u8 addr)
 {
 	int i;
 	u8 send_data;
@@ -4000,7 +4000,7 @@ static void __devinit trms1040_write_cmd(unsigned long io_port, u8 cmd, u8 addr)
  * @addr:	offset into EEPROM
  * @byte:	bytes to write
  **/
-static void __devinit trms1040_set_data(unsigned long io_port, u8 addr, u8 byte)
+static void trms1040_set_data(unsigned long io_port, u8 addr, u8 byte)
 {
 	int i;
 	u8 send_data;
@@ -4054,7 +4054,7 @@ static void __devinit trms1040_set_data(unsigned long io_port, u8 addr, u8 byte)
  * @eeprom:	the data to write
  * @io_port:	the base io port
  **/
-static void __devinit trms1040_write_all(struct NvRamType *eeprom, unsigned long io_port)
+static void trms1040_write_all(struct NvRamType *eeprom, unsigned long io_port)
 {
 	u8 *b_eeprom = (u8 *)eeprom;
 	u8 addr;
@@ -4094,7 +4094,7 @@ static void __devinit trms1040_write_all(struct NvRamType *eeprom, unsigned long
  *
  * Returns the byte read.
  **/
-static u8 __devinit trms1040_get_data(unsigned long io_port, u8 addr)
+static u8 trms1040_get_data(unsigned long io_port, u8 addr)
 {
 	int i;
 	u8 read_byte;
@@ -4132,7 +4132,7 @@ static u8 __devinit trms1040_get_data(unsigned long io_port, u8 addr)
  * @eeprom:	where to store the data
  * @io_port:	the base io port
  **/
-static void __devinit trms1040_read_all(struct NvRamType *eeprom, unsigned long io_port)
+static void trms1040_read_all(struct NvRamType *eeprom, unsigned long io_port)
 {
 	u8 *b_eeprom = (u8 *)eeprom;
 	u8 addr;
@@ -4162,7 +4162,7 @@ static void __devinit trms1040_read_all(struct NvRamType *eeprom, unsigned long
  * @eeprom:	caller allocated strcuture to read the eeprom data into
  * @io_port:	io port to read from
  **/
-static void __devinit check_eeprom(struct NvRamType *eeprom, unsigned long io_port)
+static void check_eeprom(struct NvRamType *eeprom, unsigned long io_port)
 {
 	u16 *w_eeprom = (u16 *)eeprom;
 	u16 w_addr;
@@ -4232,7 +4232,7 @@ static void __devinit check_eeprom(struct NvRamType *eeprom, unsigned long io_po
  *
  * @eeprom: The eeprom data strucutre to show details for.
  **/
-static void __devinit print_eeprom_settings(struct NvRamType *eeprom)
+static void print_eeprom_settings(struct NvRamType *eeprom)
 {
 	dprintkl(KERN_INFO, "Used settings: AdapterID=%02i, Speed=%i(%02i.%01iMHz), dev_mode=0x%02x\n",
 		eeprom->scsi_id,
@@ -4260,7 +4260,7 @@ static void adapter_sg_tables_free(struct AdapterCtlBlk *acb)
 /*
  * Allocate SG tables; as we have to pci_map them, an SG list (struct SGentry*)
  * should never cross a page boundary */
-static int __devinit adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
+static int adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
 {
 	const unsigned mem_needed = (DC395x_MAX_SRB_CNT+1)
 	                            *SEGMENTX_LEN;
@@ -4306,7 +4306,7 @@ static int __devinit adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
  *
  * @acb: The adapter to print the information for.
  **/
-static void __devinit adapter_print_config(struct AdapterCtlBlk *acb)
+static void adapter_print_config(struct AdapterCtlBlk *acb)
 {
 	u8 bval;
 
@@ -4350,7 +4350,7 @@ static void __devinit adapter_print_config(struct AdapterCtlBlk *acb)
  *
  * @acb: The adapter to initialize.
  **/
-static void __devinit adapter_init_params(struct AdapterCtlBlk *acb)
+static void adapter_init_params(struct AdapterCtlBlk *acb)
 {
 	struct NvRamType *eeprom = &acb->eeprom;
 	int i;
@@ -4412,7 +4412,7 @@ static void __devinit adapter_init_params(struct AdapterCtlBlk *acb)
  *
  * @host: The scsi host instance to fill in the values for.
  **/
-static void __devinit adapter_init_scsi_host(struct Scsi_Host *host)
+static void adapter_init_scsi_host(struct Scsi_Host *host)
 {
         struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)host->hostdata;
 	struct NvRamType *eeprom = &acb->eeprom;
@@ -4453,7 +4453,7 @@ static void __devinit adapter_init_scsi_host(struct Scsi_Host *host)
  *
  * @acb: The adapter which we are to init.
  **/
-static void __devinit adapter_init_chip(struct AdapterCtlBlk *acb)
+static void adapter_init_chip(struct AdapterCtlBlk *acb)
 {
         struct NvRamType *eeprom = &acb->eeprom;
         
@@ -4506,8 +4506,8 @@ static void __devinit adapter_init_chip(struct AdapterCtlBlk *acb)
  * Returns 0 if the initialization succeeds, any other value on
  * failure.
  **/
-static int __devinit adapter_init(struct AdapterCtlBlk *acb,
-	unsigned long io_port, u32 io_port_len, unsigned int irq)
+static int adapter_init(struct AdapterCtlBlk *acb, unsigned long io_port,
+			u32 io_port_len, unsigned int irq)
 {
 	if (!request_region(io_port, io_port_len, DC395X_NAME)) {
 		dprintkl(KERN_ERR, "Failed to reserve IO region 0x%lx\n", io_port);
@@ -4794,8 +4794,7 @@ static void banner_display(void)
  *
  * Returns 0 on success, or an error code (-ve) on failure.
  **/
-static int __devinit dc395x_init_one(struct pci_dev *dev,
-		const struct pci_device_id *id)
+static int dc395x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	struct Scsi_Host *scsi_host = NULL;
 	struct AdapterCtlBlk *acb = NULL;
@@ -4861,7 +4860,7 @@ fail:
  *
  * @dev: The PCI device to initialize.
  **/
-static void __devexit dc395x_remove_one(struct pci_dev *dev)
+static void dc395x_remove_one(struct pci_dev *dev)
 {
 	struct Scsi_Host *scsi_host = pci_get_drvdata(dev);
 	struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)(scsi_host->hostdata);
@@ -4892,7 +4891,7 @@ static struct pci_driver dc395x_driver = {
 	.name           = DC395X_NAME,
 	.id_table       = dc395x_pci_table,
 	.probe          = dc395x_init_one,
-	.remove         = __devexit_p(dc395x_remove_one),
+	.remove         = dc395x_remove_one,
 };