regulator: remove ab3100 driver

The ST-Ericsson U300 platform is getting removed, so this driver is no
longer needed.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210120151307.1726876-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

3 files changed, 0 insertions, 734 deletions

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index ba8c09d90701..88316b8a65d2 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -122,15 +122,6 @@ config REGULATOR_AAT2870
 	  If you have a AnalogicTech AAT2870 say Y to enable the
 	  regulator driver.
 
-config REGULATOR_AB3100
-	tristate "ST-Ericsson AB3100 Regulator functions"
-	depends on AB3100_CORE
-	default y if AB3100_CORE
-	help
-	 These regulators correspond to functionality in the
-	 AB3100 analog baseband dealing with power regulators
-	 for the system.
-
 config REGULATOR_AB8500
 	bool "ST-Ericsson AB8500 Power Regulators"
 	depends on AB8500_CORE
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index bd93fbd1b124..d1957629537b 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
 obj-$(CONFIG_REGULATOR_CROS_EC) += cros-ec-regulator.o
 obj-$(CONFIG_REGULATOR_CPCAP) += cpcap-regulator.o
 obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
-obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
 obj-$(CONFIG_REGULATOR_AB8500)	+= ab8500-ext.o ab8500.o
 obj-$(CONFIG_REGULATOR_ACT8865) += act8865-regulator.o
 obj-$(CONFIG_REGULATOR_ACT8945A) += act8945a-regulator.o
diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
deleted file mode 100644
index a544f45efe53..000000000000
--- a/drivers/regulator/ab3100.c
+++ /dev/null
@@ -1,724 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * drivers/regulator/ab3100.c
- *
- * Copyright (C) 2008-2009 ST-Ericsson AB
- * Low-level control of the AB3100 IC Low Dropout (LDO)
- * regulators, external regulator and buck converter
- * Author: Mattias Wallin <mattias.wallin@stericsson.com>
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/driver.h>
-#include <linux/mfd/ab3100.h>
-#include <linux/mfd/abx500.h>
-#include <linux/of.h>
-#include <linux/regulator/of_regulator.h>
-
-/* LDO registers and some handy masking definitions for AB3100 */
-#define AB3100_LDO_A		0x40
-#define AB3100_LDO_C		0x41
-#define AB3100_LDO_D		0x42
-#define AB3100_LDO_E		0x43
-#define AB3100_LDO_E_SLEEP	0x44
-#define AB3100_LDO_F		0x45
-#define AB3100_LDO_G		0x46
-#define AB3100_LDO_H		0x47
-#define AB3100_LDO_H_SLEEP_MODE	0
-#define AB3100_LDO_H_SLEEP_EN	2
-#define AB3100_LDO_ON		4
-#define AB3100_LDO_H_VSEL_AC	5
-#define AB3100_LDO_K		0x48
-#define AB3100_LDO_EXT		0x49
-#define AB3100_BUCK		0x4A
-#define AB3100_BUCK_SLEEP	0x4B
-#define AB3100_REG_ON_MASK	0x10
-
-/**
- * struct ab3100_regulator
- * A struct passed around the individual regulator functions
- * @platform_device: platform device holding this regulator
- * @dev: handle to the device
- * @plfdata: AB3100 platform data passed in at probe time
- * @regreg: regulator register number in the AB3100
- */
-struct ab3100_regulator {
-	struct device *dev;
-	struct ab3100_platform_data *plfdata;
-	u8 regreg;
-};
-
-/* The order in which registers are initialized */
-static const u8 ab3100_reg_init_order[AB3100_NUM_REGULATORS+2] = {
-	AB3100_LDO_A,
-	AB3100_LDO_C,
-	AB3100_LDO_E,
-	AB3100_LDO_E_SLEEP,
-	AB3100_LDO_F,
-	AB3100_LDO_G,
-	AB3100_LDO_H,
-	AB3100_LDO_K,
-	AB3100_LDO_EXT,
-	AB3100_BUCK,
-	AB3100_BUCK_SLEEP,
-	AB3100_LDO_D,
-};
-
-/* Preset (hardware defined) voltages for these regulators */
-#define LDO_A_VOLTAGE 2750000
-#define LDO_C_VOLTAGE 2650000
-#define LDO_D_VOLTAGE 2650000
-
-static const unsigned int ldo_e_buck_typ_voltages[] = {
-	1800000,
-	1400000,
-	1300000,
-	1200000,
-	1100000,
-	1050000,
-	900000,
-};
-
-static const unsigned int ldo_f_typ_voltages[] = {
-	1800000,
-	1400000,
-	1300000,
-	1200000,
-	1100000,
-	1050000,
-	2500000,
-	2650000,
-};
-
-static const unsigned int ldo_g_typ_voltages[] = {
-	2850000,
-	2750000,
-	1800000,
-	1500000,
-};
-
-static const unsigned int ldo_h_typ_voltages[] = {
-	2750000,
-	1800000,
-	1500000,
-	1200000,
-};
-
-static const unsigned int ldo_k_typ_voltages[] = {
-	2750000,
-	1800000,
-};
-
-
-/* The regulator devices */
-static struct ab3100_regulator
-ab3100_regulators[AB3100_NUM_REGULATORS] = {
-	{
-		.regreg = AB3100_LDO_A,
-	},
-	{
-		.regreg = AB3100_LDO_C,
-	},
-	{
-		.regreg = AB3100_LDO_D,
-	},
-	{
-		.regreg = AB3100_LDO_E,
-	},
-	{
-		.regreg = AB3100_LDO_F,
-	},
-	{
-		.regreg = AB3100_LDO_G,
-	},
-	{
-		.regreg = AB3100_LDO_H,
-	},
-	{
-		.regreg = AB3100_LDO_K,
-	},
-	{
-		.regreg = AB3100_LDO_EXT,
-		/* No voltages for the external regulator */
-	},
-	{
-		.regreg = AB3100_BUCK,
-	},
-};
-
-/*
- * General functions for enable, disable and is_enabled used for
- * LDO: A,C,E,F,G,H,K,EXT and BUCK
- */
-static int ab3100_enable_regulator(struct regulator_dev *reg)
-{
-	struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
-	int err;
-	u8 regval;
-
-	err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
-						&regval);
-	if (err) {
-		dev_warn(&reg->dev, "failed to get regid %d value\n",
-			 abreg->regreg);
-		return err;
-	}
-
-	/* The regulator is already on, no reason to go further */
-	if (regval & AB3100_REG_ON_MASK)
-		return 0;
-
-	regval |= AB3100_REG_ON_MASK;
-
-	err = abx500_set_register_interruptible(abreg->dev, 0, abreg->regreg,
-						regval);
-	if (err) {
-		dev_warn(&reg->dev, "failed to set regid %d value\n",
-			 abreg->regreg);
-		return err;
-	}
-
-	return 0;
-}
-
-static int ab3100_disable_regulator(struct regulator_dev *reg)
-{
-	struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
-	int err;
-	u8 regval;
-
-	/*
-	 * LDO D is a special regulator. When it is disabled, the entire
-	 * system is shut down. So this is handled specially.
-	 */
-	pr_info("Called ab3100_disable_regulator\n");
-	if (abreg->regreg == AB3100_LDO_D) {
-		dev_info(&reg->dev, "disabling LDO D - shut down system\n");
-		/* Setting LDO D to 0x00 cuts the power to the SoC */
-		return abx500_set_register_interruptible(abreg->dev, 0,
-							 AB3100_LDO_D, 0x00U);
-	}
-
-	/*
-	 * All other regulators are handled here
-	 */
-	err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
-						&regval);
-	if (err) {
-		dev_err(&reg->dev, "unable to get register 0x%x\n",
-			abreg->regreg);
-		return err;
-	}
-	regval &= ~AB3100_REG_ON_MASK;
-	return abx500_set_register_interruptible(abreg->dev, 0, abreg->regreg,
-						 regval);
-}
-
-static int ab3100_is_enabled_regulator(struct regulator_dev *reg)
-{
-	struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
-	u8 regval;
-	int err;
-
-	err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
-						&regval);
-	if (err) {
-		dev_err(&reg->dev, "unable to get register 0x%x\n",
-			abreg->regreg);
-		return err;
-	}
-
-	return regval & AB3100_REG_ON_MASK;
-}
-
-static int ab3100_get_voltage_regulator(struct regulator_dev *reg)
-{
-	struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
-	u8 regval;
-	int err;
-
-	/*
-	 * For variable types, read out setting and index into
-	 * supplied voltage list.
-	 */
-	err = abx500_get_register_interruptible(abreg->dev, 0,
-						abreg->regreg, &regval);
-	if (err) {
-		dev_warn(&reg->dev,
-			 "failed to get regulator value in register %02x\n",
-			 abreg->regreg);
-		return err;
-	}
-
-	/* The 3 highest bits index voltages */
-	regval &= 0xE0;
-	regval >>= 5;
-
-	if (regval >= reg->desc->n_voltages) {
-		dev_err(&reg->dev,
-			"regulator register %02x contains an illegal voltage setting\n",
-			abreg->regreg);
-		return -EINVAL;
-	}
-
-	return reg->desc->volt_table[regval];
-}
-
-static int ab3100_set_voltage_regulator_sel(struct regulator_dev *reg,
-					    unsigned selector)
-{
-	struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
-	u8 regval;
-	int err;
-
-	err = abx500_get_register_interruptible(abreg->dev, 0,
-						abreg->regreg, &regval);
-	if (err) {
-		dev_warn(&reg->dev,
-			 "failed to get regulator register %02x\n",
-			 abreg->regreg);
-		return err;
-	}
-
-	/* The highest three bits control the variable regulators */
-	regval &= ~0xE0;
-	regval |= (selector << 5);
-
-	err = abx500_set_register_interruptible(abreg->dev, 0,
-						abreg->regreg, regval);
-	if (err)
-		dev_warn(&reg->dev, "failed to set regulator register %02x\n",
-			abreg->regreg);
-
-	return err;
-}
-
-static int ab3100_set_suspend_voltage_regulator(struct regulator_dev *reg,
-						int uV)
-{
-	struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
-	u8 regval;
-	int err;
-	int bestindex;
-	u8 targetreg;
-
-	if (abreg->regreg == AB3100_LDO_E)
-		targetreg = AB3100_LDO_E_SLEEP;
-	else if (abreg->regreg == AB3100_BUCK)
-		targetreg = AB3100_BUCK_SLEEP;
-	else
-		return -EINVAL;
-
-	/* LDO E and BUCK have special suspend voltages you can set */
-	bestindex = regulator_map_voltage_iterate(reg, uV, uV);
-
-	err = abx500_get_register_interruptible(abreg->dev, 0,
-						targetreg, &regval);
-	if (err) {
-		dev_warn(&reg->dev,
-			 "failed to get regulator register %02x\n",
-			 targetreg);
-		return err;
-	}
-
-	/* The highest three bits control the variable regulators */
-	regval &= ~0xE0;
-	regval |= (bestindex << 5);
-
-	err = abx500_set_register_interruptible(abreg->dev, 0,
-						targetreg, regval);
-	if (err)
-		dev_warn(&reg->dev, "failed to set regulator register %02x\n",
-			abreg->regreg);
-
-	return err;
-}
-
-/*
- * The external regulator can just define a fixed voltage.
- */
-static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg)
-{
-	struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
-
-	if (abreg->plfdata)
-		return abreg->plfdata->external_voltage;
-	else
-		/* TODO: encode external voltage into device tree */
-		return 0;
-}
-
-static const struct regulator_ops regulator_ops_fixed = {
-	.enable      = ab3100_enable_regulator,
-	.disable     = ab3100_disable_regulator,
-	.is_enabled  = ab3100_is_enabled_regulator,
-};
-
-static const struct regulator_ops regulator_ops_variable = {
-	.enable      = ab3100_enable_regulator,
-	.disable     = ab3100_disable_regulator,
-	.is_enabled  = ab3100_is_enabled_regulator,
-	.get_voltage = ab3100_get_voltage_regulator,
-	.set_voltage_sel = ab3100_set_voltage_regulator_sel,
-	.list_voltage = regulator_list_voltage_table,
-};
-
-static const struct regulator_ops regulator_ops_variable_sleepable = {
-	.enable      = ab3100_enable_regulator,
-	.disable     = ab3100_disable_regulator,
-	.is_enabled  = ab3100_is_enabled_regulator,
-	.get_voltage = ab3100_get_voltage_regulator,
-	.set_voltage_sel = ab3100_set_voltage_regulator_sel,
-	.set_suspend_voltage = ab3100_set_suspend_voltage_regulator,
-	.list_voltage = regulator_list_voltage_table,
-};
-
-/*
- * LDO EXT is an external regulator so it is really
- * not possible to set any voltage locally here, AB3100
- * is an on/off switch plain an simple. The external
- * voltage is defined in the board set-up if any.
- */
-static const struct regulator_ops regulator_ops_external = {
-	.enable      = ab3100_enable_regulator,
-	.disable     = ab3100_disable_regulator,
-	.is_enabled  = ab3100_is_enabled_regulator,
-	.get_voltage = ab3100_get_voltage_regulator_external,
-};
-
-static const struct regulator_desc
-ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
-	{
-		.name = "LDO_A",
-		.id   = AB3100_LDO_A,
-		.ops  = &regulator_ops_fixed,
-		.n_voltages = 1,
-		.type = REGULATOR_VOLTAGE,
-		.owner = THIS_MODULE,
-		.fixed_uV = LDO_A_VOLTAGE,
-		.enable_time = 200,
-	},
-	{
-		.name = "LDO_C",
-		.id   = AB3100_LDO_C,
-		.ops  = &regulator_ops_fixed,
-		.n_voltages = 1,
-		.type = REGULATOR_VOLTAGE,
-		.owner = THIS_MODULE,
-		.fixed_uV = LDO_C_VOLTAGE,
-		.enable_time = 200,
-	},
-	{
-		.name = "LDO_D",
-		.id   = AB3100_LDO_D,
-		.ops  = &regulator_ops_fixed,
-		.n_voltages = 1,
-		.type = REGULATOR_VOLTAGE,
-		.owner = THIS_MODULE,
-		.fixed_uV = LDO_D_VOLTAGE,
-		.enable_time = 200,
-	},
-	{
-		.name = "LDO_E",
-		.id   = AB3100_LDO_E,
-		.ops  = &regulator_ops_variable_sleepable,
-		.n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
-		.volt_table = ldo_e_buck_typ_voltages,
-		.type = REGULATOR_VOLTAGE,
-		.owner = THIS_MODULE,
-		.enable_time = 200,
-	},
-	{
-		.name = "LDO_F",
-		.id   = AB3100_LDO_F,
-		.ops  = &regulator_ops_variable,
-		.n_voltages = ARRAY_SIZE(ldo_f_typ_voltages),
-		.volt_table = ldo_f_typ_voltages,
-		.type = REGULATOR_VOLTAGE,
-		.owner = THIS_MODULE,
-		.enable_time = 600,
-	},
-	{
-		.name = "LDO_G",
-		.id   = AB3100_LDO_G,
-		.ops  = &regulator_ops_variable,
-		.n_voltages = ARRAY_SIZE(ldo_g_typ_voltages),
-		.volt_table = ldo_g_typ_voltages,
-		.type = REGULATOR_VOLTAGE,
-		.owner = THIS_MODULE,
-		.enable_time = 400,
-	},
-	{
-		.name = "LDO_H",
-		.id   = AB3100_LDO_H,
-		.ops  = &regulator_ops_variable,
-		.n_voltages = ARRAY_SIZE(ldo_h_typ_voltages),
-		.volt_table = ldo_h_typ_voltages,
-		.type = REGULATOR_VOLTAGE,
-		.owner = THIS_MODULE,
-		.enable_time = 200,
-	},
-	{
-		.name = "LDO_K",
-		.id   = AB3100_LDO_K,
-		.ops  = &regulator_ops_variable,
-		.n_voltages = ARRAY_SIZE(ldo_k_typ_voltages),
-		.volt_table = ldo_k_typ_voltages,
-		.type = REGULATOR_VOLTAGE,
-		.owner = THIS_MODULE,
-		.enable_time = 200,
-	},
-	{
-		.name = "LDO_EXT",
-		.id   = AB3100_LDO_EXT,
-		.ops  = &regulator_ops_external,
-		.type = REGULATOR_VOLTAGE,
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "BUCK",
-		.id   = AB3100_BUCK,
-		.ops  = &regulator_ops_variable_sleepable,
-		.n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
-		.volt_table = ldo_e_buck_typ_voltages,
-		.type = REGULATOR_VOLTAGE,
-		.owner = THIS_MODULE,
-		.enable_time = 1000,
-	},
-};
-
-static int ab3100_regulator_register(struct platform_device *pdev,
-				     struct ab3100_platform_data *plfdata,
-				     struct regulator_init_data *init_data,
-				     struct device_node *np,
-				     unsigned long id)
-{
-	const struct regulator_desc *desc;
-	struct ab3100_regulator *reg;
-	struct regulator_dev *rdev;
-	struct regulator_config config = { };
-	int err, i;
-
-	for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
-		desc = &ab3100_regulator_desc[i];
-		if (desc->id == id)
-			break;
-	}
-	if (desc->id != id)
-		return -ENODEV;
-
-	/* Same index used for this array */
-	reg = &ab3100_regulators[i];
-
-	/*
-	 * Initialize per-regulator struct.
-	 * Inherit platform data, this comes down from the
-	 * i2c boarddata, from the machine. So if you want to
-	 * see what it looks like for a certain machine, go
-	 * into the machine I2C setup.
-	 */
-	reg->dev = &pdev->dev;
-	if (plfdata) {
-		reg->plfdata = plfdata;
-		config.init_data = &plfdata->reg_constraints[i];
-	} else if (np) {
-		config.of_node = np;
-		config.init_data = init_data;
-	}
-	config.dev = &pdev->dev;
-	config.driver_data = reg;
-
-	rdev = devm_regulator_register(&pdev->dev, desc, &config);
-	if (IS_ERR(rdev)) {
-		err = PTR_ERR(rdev);
-		dev_err(&pdev->dev,
-			"%s: failed to register regulator %s err %d\n",
-			__func__, desc->name,
-			err);
-		return err;
-	}
-
-	return 0;
-}
-
-static struct of_regulator_match ab3100_regulator_matches[] = {
-	{ .name = "ab3100_ldo_a", .driver_data = (void *) AB3100_LDO_A, },
-	{ .name = "ab3100_ldo_c", .driver_data = (void *) AB3100_LDO_C, },
-	{ .name = "ab3100_ldo_d", .driver_data = (void *) AB3100_LDO_D, },
-	{ .name = "ab3100_ldo_e", .driver_data = (void *) AB3100_LDO_E, },
-	{ .name = "ab3100_ldo_f", .driver_data = (void *) AB3100_LDO_F },
-	{ .name = "ab3100_ldo_g", .driver_data = (void *) AB3100_LDO_G },
-	{ .name = "ab3100_ldo_h", .driver_data = (void *) AB3100_LDO_H },
-	{ .name = "ab3100_ldo_k", .driver_data = (void *) AB3100_LDO_K },
-	{ .name = "ab3100_ext", .driver_data = (void *) AB3100_LDO_EXT },
-	{ .name = "ab3100_buck", .driver_data = (void *) AB3100_BUCK },
-};
-
-/*
- * Initial settings of ab3100 registers.
- * Common for below LDO regulator settings are that
- * bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0).
- * Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode.
- */
-/* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */
-#define LDO_A_SETTING		0x16
-/* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */
-#define LDO_C_SETTING		0x10
-/* LDO_D 0x10: 2.65V, ON, sleep mode not used */
-#define LDO_D_SETTING		0x10
-/* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */
-#define LDO_E_SETTING		0x10
-/* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */
-#define LDO_E_SLEEP_SETTING	0x00
-/* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */
-#define LDO_F_SETTING		0xD0
-/* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */
-#define LDO_G_SETTING		0x00
-/* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */
-#define LDO_H_SETTING		0x18
-/* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */
-#define LDO_K_SETTING		0x00
-/* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */
-#define LDO_EXT_SETTING		0x00
-/* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */
-#define BUCK_SETTING	0x7D
-/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */
-#define BUCK_SLEEP_SETTING	0xAC
-
-static const u8 ab3100_reg_initvals[] = {
-	LDO_A_SETTING,
-	LDO_C_SETTING,
-	LDO_E_SETTING,
-	LDO_E_SLEEP_SETTING,
-	LDO_F_SETTING,
-	LDO_G_SETTING,
-	LDO_H_SETTING,
-	LDO_K_SETTING,
-	LDO_EXT_SETTING,
-	BUCK_SETTING,
-	BUCK_SLEEP_SETTING,
-	LDO_D_SETTING,
-};
-
-static int
-ab3100_regulator_of_probe(struct platform_device *pdev, struct device_node *np)
-{
-	int err, i;
-
-	/*
-	 * Set up the regulator registers, as was previously done with
-	 * platform data.
-	 */
-	/* Set up regulators */
-	for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) {
-		err = abx500_set_register_interruptible(&pdev->dev, 0,
-					ab3100_reg_init_order[i],
-					ab3100_reg_initvals[i]);
-		if (err) {
-			dev_err(&pdev->dev, "regulator initialization failed with error %d\n",
-				err);
-			return err;
-		}
-	}
-
-	for (i = 0; i < ARRAY_SIZE(ab3100_regulator_matches); i++) {
-		err = ab3100_regulator_register(
-			pdev, NULL, ab3100_regulator_matches[i].init_data,
-			ab3100_regulator_matches[i].of_node,
-			(unsigned long)ab3100_regulator_matches[i].driver_data);
-		if (err)
-			return err;
-	}
-
-	return 0;
-}
-
-
-static int ab3100_regulators_probe(struct platform_device *pdev)
-{
-	struct ab3100_platform_data *plfdata = dev_get_platdata(&pdev->dev);
-	struct device_node *np = pdev->dev.of_node;
-	int err = 0;
-	u8 data;
-	int i;
-
-	/* Check chip state */
-	err = abx500_get_register_interruptible(&pdev->dev, 0,
-						AB3100_LDO_D, &data);
-	if (err) {
-		dev_err(&pdev->dev, "could not read initial status of LDO_D\n");
-		return err;
-	}
-	if (data & 0x10)
-		dev_notice(&pdev->dev,
-			   "chip is already in active mode (Warm start)\n");
-	else
-		dev_notice(&pdev->dev,
-			   "chip is in inactive mode (Cold start)\n");
-
-	if (np) {
-		err = of_regulator_match(&pdev->dev, np,
-					 ab3100_regulator_matches,
-					 ARRAY_SIZE(ab3100_regulator_matches));
-		if (err < 0) {
-			dev_err(&pdev->dev,
-				"Error parsing regulator init data: %d\n", err);
-			return err;
-		}
-		return ab3100_regulator_of_probe(pdev, np);
-	}
-
-	/* Set up regulators */
-	for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) {
-		err = abx500_set_register_interruptible(&pdev->dev, 0,
-					ab3100_reg_init_order[i],
-					plfdata->reg_initvals[i]);
-		if (err) {
-			dev_err(&pdev->dev, "regulator initialization failed with error %d\n",
-				err);
-			return err;
-		}
-	}
-
-	/* Register the regulators */
-	for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
-		const struct regulator_desc *desc = &ab3100_regulator_desc[i];
-
-		err = ab3100_regulator_register(pdev, plfdata, NULL, NULL,
-						desc->id);
-		if (err)
-			return err;
-	}
-
-	return 0;
-}
-
-static struct platform_driver ab3100_regulators_driver = {
-	.driver = {
-		.name  = "ab3100-regulators",
-	},
-	.probe = ab3100_regulators_probe,
-};
-
-static __init int ab3100_regulators_init(void)
-{
-	return platform_driver_register(&ab3100_regulators_driver);
-}
-
-static __exit void ab3100_regulators_exit(void)
-{
-	platform_driver_unregister(&ab3100_regulators_driver);
-}
-
-subsys_initcall(ab3100_regulators_init);
-module_exit(ab3100_regulators_exit);
-
-MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
-MODULE_DESCRIPTION("AB3100 Regulator driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:ab3100-regulators");