summaryrefslogtreecommitdiffstats
path: root/drivers/pwm/pwm-tiehrpwm.c
diff options
context:
space:
mode:
authorPhilip, Avinash <avinashphilip@ti.com>2012-09-06 10:40:03 +0530
committerThierry Reding <thierry.reding@avionic-design.de>2012-09-10 17:05:53 +0200
commitdaa5629b21a1e59ed0ef9515a9e791d2f75cc5ca (patch)
tree84a99183412d95253d77cf4f6d25e7f05677a94a /drivers/pwm/pwm-tiehrpwm.c
parent454870a44b0687675180506b7774fb559d610675 (diff)
downloadlinux-daa5629b21a1e59ed0ef9515a9e791d2f75cc5ca.tar.bz2
pwm: pwm-tiehrpwm: Add support for configuring polarity of PWM
EHRPWM hardware supports polarity configuration of PWM output. However configuration of polarity done in hardware only in .enable() to ensure PWM output present only after enabling PWM. This commit adds support for polarity configuration for EHRPWM. When being here, remove configuring of polarity during .config() and do it explicitly from .set_polarity(). Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Diffstat (limited to 'drivers/pwm/pwm-tiehrpwm.c')
-rw-r--r--drivers/pwm/pwm-tiehrpwm.c73
1 files changed, 51 insertions, 22 deletions
diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
index b1996bcd5b78..caf00feadc66 100644
--- a/drivers/pwm/pwm-tiehrpwm.c
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -81,6 +81,15 @@
#define AQCTL_ZRO_FRCHIGH BIT(1)
#define AQCTL_ZRO_FRCTOGGLE (BIT(1) | BIT(0))
+#define AQCTL_CHANA_POLNORMAL (AQCTL_CAU_FRCLOW | AQCTL_PRD_FRCHIGH | \
+ AQCTL_ZRO_FRCHIGH)
+#define AQCTL_CHANA_POLINVERSED (AQCTL_CAU_FRCHIGH | AQCTL_PRD_FRCLOW | \
+ AQCTL_ZRO_FRCLOW)
+#define AQCTL_CHANB_POLNORMAL (AQCTL_CBU_FRCLOW | AQCTL_PRD_FRCHIGH | \
+ AQCTL_ZRO_FRCHIGH)
+#define AQCTL_CHANB_POLINVERSED (AQCTL_CBU_FRCHIGH | AQCTL_PRD_FRCLOW | \
+ AQCTL_ZRO_FRCLOW)
+
#define AQSFRC_RLDCSF_MASK (BIT(7) | BIT(6))
#define AQSFRC_RLDCSF_ZRO 0
#define AQSFRC_RLDCSF_PRD BIT(6)
@@ -105,6 +114,7 @@ struct ehrpwm_pwm_chip {
unsigned int clk_rate;
void __iomem *mmio_base;
unsigned long period_cycles[NUM_PWM_CHANNEL];
+ enum pwm_polarity polarity[NUM_PWM_CHANNEL];
};
static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip)
@@ -165,39 +175,37 @@ static int set_prescale_div(unsigned long rqst_prescaler,
return 1;
}
-static void configure_chans(struct ehrpwm_pwm_chip *pc, int chan,
- unsigned long duty_cycles)
+static void configure_polarity(struct ehrpwm_pwm_chip *pc, int chan)
{
- int cmp_reg, aqctl_reg;
+ int aqctl_reg;
unsigned short aqctl_val, aqctl_mask;
/*
- * Channels can be configured from action qualifier module.
- * Channel 0 configured with compare A register and for
- * up-counter mode.
- * Channel 1 configured with compare B register and for
- * up-counter mode.
+ * Configure PWM output to HIGH/LOW level on counter
+ * reaches compare register value and LOW/HIGH level
+ * on counter value reaches period register value and
+ * zero value on counter
*/
if (chan == 1) {
aqctl_reg = AQCTLB;
- cmp_reg = CMPB;
- /* Configure PWM Low from compare B value */
- aqctl_val = AQCTL_CBU_FRCLOW;
aqctl_mask = AQCTL_CBU_MASK;
+
+ if (pc->polarity[chan] == PWM_POLARITY_INVERSED)
+ aqctl_val = AQCTL_CHANB_POLINVERSED;
+ else
+ aqctl_val = AQCTL_CHANB_POLNORMAL;
} else {
- cmp_reg = CMPA;
aqctl_reg = AQCTLA;
- /* Configure PWM Low from compare A value*/
- aqctl_val = AQCTL_CAU_FRCLOW;
aqctl_mask = AQCTL_CAU_MASK;
+
+ if (pc->polarity[chan] == PWM_POLARITY_INVERSED)
+ aqctl_val = AQCTL_CHANA_POLINVERSED;
+ else
+ aqctl_val = AQCTL_CHANA_POLNORMAL;
}
- /* Configure PWM High from period value and zero value */
- aqctl_val |= AQCTL_PRD_FRCHIGH | AQCTL_ZRO_FRCHIGH;
aqctl_mask |= AQCTL_PRD_MASK | AQCTL_ZRO_MASK;
- ehrpwm_modify(pc->mmio_base, aqctl_reg, aqctl_mask, aqctl_val);
-
- ehrpwm_write(pc->mmio_base, cmp_reg, duty_cycles);
+ ehrpwm_modify(pc->mmio_base, aqctl_reg, aqctl_mask, aqctl_val);
}
/*
@@ -211,7 +219,7 @@ static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
unsigned long long c;
unsigned long period_cycles, duty_cycles;
unsigned short ps_divval, tb_divval;
- int i;
+ int i, cmp_reg;
if (period_ns < 0 || duty_ns < 0 || period_ns > NSEC_PER_SEC)
return -ERANGE;
@@ -278,12 +286,29 @@ static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_CTRMODE_MASK,
TBCTL_CTRMODE_UP);
- /* Configure the channel for duty cycle */
- configure_chans(pc, pwm->hwpwm, duty_cycles);
+ if (pwm->hwpwm == 1)
+ /* Channel 1 configured with compare B register */
+ cmp_reg = CMPB;
+ else
+ /* Channel 0 configured with compare A register */
+ cmp_reg = CMPA;
+
+ ehrpwm_write(pc->mmio_base, cmp_reg, duty_cycles);
+
pm_runtime_put_sync(chip->dev);
return 0;
}
+static int ehrpwm_pwm_set_polarity(struct pwm_chip *chip,
+ struct pwm_device *pwm, enum pwm_polarity polarity)
+{
+ struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
+
+ /* Configuration of polarity in hardware delayed, do at enable */
+ pc->polarity[pwm->hwpwm] = polarity;
+ return 0;
+}
+
static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
@@ -307,6 +332,9 @@ static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val);
+ /* Channels polarity can be configured from action qualifier module */
+ configure_polarity(pc, pwm->hwpwm);
+
/* Enable time counter for free_run */
ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_FREE_RUN);
return 0;
@@ -358,6 +386,7 @@ static void ehrpwm_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
static const struct pwm_ops ehrpwm_pwm_ops = {
.free = ehrpwm_pwm_free,
.config = ehrpwm_pwm_config,
+ .set_polarity = ehrpwm_pwm_set_polarity,
.enable = ehrpwm_pwm_enable,
.disable = ehrpwm_pwm_disable,
.owner = THIS_MODULE,