ptp: ptp_clockmatrix: Add wait_for_sys_apll_dpll_lock.

Part of the device initialization aligns the rising edge of the output
clock to the internal 1 PPS clock. If the system APLL and DPLL is not
locked, then the alignment will fail and there will be a fixed offset
between the internal 1 PPS clock and the output clock.

After loading the device firmware, poll the system APLL and DPLL for
locked state prior to initialization, timing out after 2 seconds.

Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 10 insertions, 0 deletions

diff --git a/drivers/ptp/idt8a340_reg.h b/drivers/ptp/idt8a340_reg.h
index a664dfe5fd2f..ac524cf0f31f 100644
--- a/drivers/ptp/idt8a340_reg.h
+++ b/drivers/ptp/idt8a340_reg.h
@@ -122,6 +122,8 @@
 #define OTP_SCSR_CONFIG_SELECT            0x0022
 
 #define STATUS                            0xc03c
+#define DPLL_SYS_STATUS                   0x0020
+#define DPLL_SYS_APLL_STATUS              0x0021
 #define USER_GPIO0_TO_7_STATUS            0x008a
 #define USER_GPIO8_TO_15_STATUS           0x008b
 
@@ -707,4 +709,12 @@
 /* Bit definitions for the DPLL_CTRL_COMBO_MASTER_CFG register */
 #define COMBO_MASTER_HOLD                 BIT(0)
 
+/* Bit definitions for DPLL_SYS_STATUS register */
+#define DPLL_SYS_STATE_MASK               (0xf)
+
+/* Bit definitions for SYS_APLL_STATUS register */
+#define SYS_APLL_LOSS_LOCK_LIVE_MASK       BIT(0)
+#define SYS_APLL_LOSS_LOCK_LIVE_LOCKED     0
+#define SYS_APLL_LOSS_LOCK_LIVE_UNLOCKED   1
+
 #endif