diff options
| author | Geert Uytterhoeven <geert+renesas@glider.be> | 2015-02-27 18:38:02 +0100 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2015-03-09 18:10:56 +0100 |
| commit | 05c5f265c6f72750d2a60f75ff3cfefe47379210 (patch) | |
| tree | e5da0868abe619f969c6df7c78f53efc3d7a4041 /drivers/pinctrl/sh-pfc | |
| parent | eaef1279fa349db0cbec953e745d91db019a729e (diff) | |
| download | linux-05c5f265c6f72750d2a60f75ff3cfefe47379210.tar.bz2 | |
pinctrl: sh-pfc: Do not overwrite bias configuration
After the last user of the in_pd/in_pu bias parameters of the _PCRH()
macro was removed in commit 80da8e02d22caaef ("sh-pfc: r8a7740: Add bias
(pull-up/down) pinconf support"), bias parameters are supposed to be
configured using the generic pinctl mechanism, which calls the
.set_bias() method.
However, the PORTCR() macro still represents the control register as
consisting of two 4-bit fields. Hence the bias configuration in the
uppermost 2 bits is always overwritten with zeroes when a pin is
configured for GPIO, disabling any previously configured bias.
Use the variable config register macro instead, to represent the
register as having 4 fields, and to make sure only the input/output
control and function fields are touched.
This affects R-Mobile APE6 (r8a73a4), R-Mobile A1 (r8a7740), SH-Mobile
AP4 (sh7372), and SH-Mobile AG5 (sh73a0).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/pinctrl/sh-pfc')
| -rw-r--r-- | drivers/pinctrl/sh-pfc/sh_pfc.h | 25 |
1 files changed, 13 insertions, 12 deletions
diff --git a/drivers/pinctrl/sh-pfc/sh_pfc.h b/drivers/pinctrl/sh-pfc/sh_pfc.h index c83728626906..ed5cf4192fa1 100644 --- a/drivers/pinctrl/sh-pfc/sh_pfc.h +++ b/drivers/pinctrl/sh-pfc/sh_pfc.h @@ -302,20 +302,21 @@ struct sh_pfc_soc_info { /* * PORTnCR macro */ -#define _PCRH(in, in_pd, in_pu, out) \ - 0, (out), (in), 0, \ - 0, 0, 0, 0, \ - 0, 0, (in_pd), 0, \ - 0, 0, (in_pu), 0 - #define PORTCR(nr, reg) \ { \ - PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \ - _PCRH(PORT##nr##_IN, 0, 0, PORT##nr##_OUT), \ - PORT##nr##_FN0, PORT##nr##_FN1, \ - PORT##nr##_FN2, PORT##nr##_FN3, \ - PORT##nr##_FN4, PORT##nr##_FN5, \ - PORT##nr##_FN6, PORT##nr##_FN7 } \ + PINMUX_CFG_REG_VAR("PORT" nr "CR", reg, 8, 2, 2, 1, 3) {\ + /* PULMD[1:0], handled by .set_bias() */ \ + 0, 0, 0, 0, \ + /* IE and OE */ \ + 0, PORT##nr##_OUT, PORT##nr##_IN, 0, \ + /* SEC, not supported */ \ + 0, 0, \ + /* PTMD[2:0] */ \ + PORT##nr##_FN0, PORT##nr##_FN1, \ + PORT##nr##_FN2, PORT##nr##_FN3, \ + PORT##nr##_FN4, PORT##nr##_FN5, \ + PORT##nr##_FN6, PORT##nr##_FN7 \ + } \ } #endif /* __SH_PFC_H */ |