Merge tag 'pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "We have no core changes but lots of incremental development in drivers
  all over the place: Renesas, NXP, Mediatek and Actions Semiconductor
  keep churning out new SoCs.

  I have some subtree maintainers for Renesas and Intel helping out to
  keep down the load, it's been working smoothly (Samsung also have a
  subtree but it was not used this cycle.)

  New drivers:

   - NXP (ex Freescale) i.MX 8 QXP SoC driver.

   - Mediatek MT6797 SoC driver.

   - Mediatek MT7629 SoC driver.

   - Actions Semiconductor S700 SoC driver.

   - Renesas RZ/A2 SoC driver.

   - Allwinner sunxi suniv F1C100 SoC driver.

   - Qualcomm PMS405 PMIC driver.

   - Microsemi Ocelot Jaguar2 SoC driver.

  Improvements:

   - Some RT improvements (using raw spinlocks where appropriate).

   - A lot of new pin sets on the Renesas PFC pin controllers.

   - GPIO hogs now work on the Qualcomm SPMI/SSBI pin controller GPIO
     chips, and Xway.

   - Major modernization of the Intel pin control drivers.

   - STM32 pin control driver will now synchronize usage of pins with
     another CPU using a hardware spinlock"

* tag 'pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (145 commits)
  dt-bindings: arm: fsl-scu: add imx8qm pinctrl support
  pinctrl: freescale: Break dependency on SOC_IMX8MQ for i.MX8MQ
  pinctrl: imx-scu: Depend on IMX_SCU
  pinctrl: ocelot: Add dependency on HAS_IOMEM
  pinctrl: ocelot: add MSCC Jaguar2 support
  pinctrl: bcm: ns: support updated DT binding as syscon subnode
  dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon
  MAINTAINERS: merge at91 pinctrl entries
  pinctrl: imx8qxp: break the dependency on SOC_IMX8QXP
  pinctrl: uniphier: constify uniphier_pinctrl_socdata
  pinctrl: mediatek: improve Kconfig dependencies
  pinctrl: msm: mark PM functions as __maybe_unused
  dt-bindings: pinctrl: sunxi: Add supply properties
  pinctrl: meson: meson8b: add the missing GPIO_GROUPs for BOOT and CARD
  pinctrl: meson: meson8: add the missing GPIO_GROUPs for BOOT and CARD
  pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs"
  pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs"
  pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins
  pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins
  pinctrl: sh-pfc: Make pinmux_cfg_reg.var_field_width[] variable-length
  ...

1 files changed, 31 insertions, 2 deletions

diff --git a/drivers/pinctrl/meson/pinctrl-meson8.c b/drivers/pinctrl/meson/pinctrl-meson8.c
index 86466173114d..785e29e74a56 100644
--- a/drivers/pinctrl/meson/pinctrl-meson8.c
+++ b/drivers/pinctrl/meson/pinctrl-meson8.c
@@ -506,6 +506,32 @@ static struct meson_pmx_group meson8_cbus_groups[] = {
 	GPIO_GROUP(GPIOZ_12),
 	GPIO_GROUP(GPIOZ_13),
 	GPIO_GROUP(GPIOZ_14),
+	GPIO_GROUP(CARD_0),
+	GPIO_GROUP(CARD_1),
+	GPIO_GROUP(CARD_2),
+	GPIO_GROUP(CARD_3),
+	GPIO_GROUP(CARD_4),
+	GPIO_GROUP(CARD_5),
+	GPIO_GROUP(CARD_6),
+	GPIO_GROUP(BOOT_0),
+	GPIO_GROUP(BOOT_1),
+	GPIO_GROUP(BOOT_2),
+	GPIO_GROUP(BOOT_3),
+	GPIO_GROUP(BOOT_4),
+	GPIO_GROUP(BOOT_5),
+	GPIO_GROUP(BOOT_6),
+	GPIO_GROUP(BOOT_7),
+	GPIO_GROUP(BOOT_8),
+	GPIO_GROUP(BOOT_9),
+	GPIO_GROUP(BOOT_10),
+	GPIO_GROUP(BOOT_11),
+	GPIO_GROUP(BOOT_12),
+	GPIO_GROUP(BOOT_13),
+	GPIO_GROUP(BOOT_14),
+	GPIO_GROUP(BOOT_15),
+	GPIO_GROUP(BOOT_16),
+	GPIO_GROUP(BOOT_17),
+	GPIO_GROUP(BOOT_18),
 
 	/* bank X */
 	GROUP(sd_d0_a,		8,	5),
@@ -774,7 +800,7 @@ static struct meson_pmx_group meson8_aobus_groups[] = {
 	GROUP(hdmi_cec_ao,		0,	17),
 };
 
-static const char * const gpio_groups[] = {
+static const char * const gpio_periphs_groups[] = {
 	"GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3", "GPIOX_4",
 	"GPIOX_5", "GPIOX_6", "GPIOX_7", "GPIOX_8", "GPIOX_9",
 	"GPIOX_10", "GPIOX_11", "GPIOX_12", "GPIOX_13", "GPIOX_14",
@@ -807,7 +833,9 @@ static const char * const gpio_groups[] = {
 	"BOOT_5", "BOOT_6", "BOOT_7", "BOOT_8", "BOOT_9",
 	"BOOT_10", "BOOT_11", "BOOT_12", "BOOT_13", "BOOT_14",
 	"BOOT_15", "BOOT_16", "BOOT_17", "BOOT_18",
+};
 
+static const char * const gpio_aobus_groups[] = {
 	"GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3",
 	"GPIOAO_4", "GPIOAO_5", "GPIOAO_6", "GPIOAO_7",
 	"GPIOAO_8", "GPIOAO_9", "GPIOAO_10", "GPIOAO_11",
@@ -994,7 +1022,7 @@ static const char * const hdmi_cec_ao_groups[] = {
 };
 
 static struct meson_pmx_func meson8_cbus_functions[] = {
-	FUNCTION(gpio),
+	FUNCTION(gpio_periphs),
 	FUNCTION(sd_a),
 	FUNCTION(sdxc_a),
 	FUNCTION(pcm_a),
@@ -1030,6 +1058,7 @@ static struct meson_pmx_func meson8_cbus_functions[] = {
 };
 
 static struct meson_pmx_func meson8_aobus_functions[] = {
+	FUNCTION(gpio_aobus),
 	FUNCTION(uart_ao),
 	FUNCTION(remote),
 	FUNCTION(i2c_slave_ao),