diff options
| author | Liam Beguin <lvb@xiphos.com> | 2020-12-11 14:12:41 -0500 |
|---|---|---|
| committer | Vinod Koul <vkoul@kernel.org> | 2021-03-12 15:33:05 +0530 |
| commit | eb445a15fa6910dd25b2fc1217ac39f47104b7d6 (patch) | |
| tree | f75a88c0725dbf256f5452f40e0131b870ac7539 /drivers/phy/ti/phy-tusb1210.c | |
| parent | 015acd5d3addb0e2cae1c4e1ed81d5f0a1c785ad (diff) | |
| download | linux-eb445a15fa6910dd25b2fc1217ac39f47104b7d6.tar.bz2 | |
phy: tusb1210: use bitmasks to set VENDOR_SPECIFIC2
Start by reading the content of the VENDOR_SPECIFIC2 register and update
each bit field based on device properties when defined.
The use of bit masks prevents fields from overriding each other and
enables users to clear bits which are set by default, like datapolarity
in this instance.
Signed-off-by: Liam Beguin <lvb@xiphos.com>
Link: https://lore.kernel.org/r/20201211191241.21306-1-liambeguin@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Diffstat (limited to 'drivers/phy/ti/phy-tusb1210.c')
| -rw-r--r-- | drivers/phy/ti/phy-tusb1210.c | 27 |
1 files changed, 14 insertions, 13 deletions
diff --git a/drivers/phy/ti/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c index d8d0cc11d187..a63213f5972a 100644 --- a/drivers/phy/ti/phy-tusb1210.c +++ b/drivers/phy/ti/phy-tusb1210.c @@ -7,15 +7,16 @@ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> */ #include <linux/module.h> +#include <linux/bitfield.h> #include <linux/ulpi/driver.h> #include <linux/ulpi/regs.h> #include <linux/gpio/consumer.h> #include <linux/phy/ulpi_phy.h> #define TUSB1210_VENDOR_SPECIFIC2 0x80 -#define TUSB1210_VENDOR_SPECIFIC2_IHSTX_SHIFT 0 -#define TUSB1210_VENDOR_SPECIFIC2_ZHSDRV_SHIFT 4 -#define TUSB1210_VENDOR_SPECIFIC2_DP_SHIFT 6 +#define TUSB1210_VENDOR_SPECIFIC2_IHSTX_MASK GENMASK(3, 0) +#define TUSB1210_VENDOR_SPECIFIC2_ZHSDRV_MASK GENMASK(5, 4) +#define TUSB1210_VENDOR_SPECIFIC2_DP_MASK BIT(6) struct tusb1210 { struct ulpi *ulpi; @@ -118,22 +119,22 @@ static int tusb1210_probe(struct ulpi *ulpi) * diagram optimization and DP/DM swap. */ + reg = ulpi_read(ulpi, TUSB1210_VENDOR_SPECIFIC2); + /* High speed output drive strength configuration */ - device_property_read_u8(&ulpi->dev, "ihstx", &val); - reg = val << TUSB1210_VENDOR_SPECIFIC2_IHSTX_SHIFT; + if (!device_property_read_u8(&ulpi->dev, "ihstx", &val)) + u8p_replace_bits(®, val, (u8)TUSB1210_VENDOR_SPECIFIC2_IHSTX_MASK); /* High speed output impedance configuration */ - device_property_read_u8(&ulpi->dev, "zhsdrv", &val); - reg |= val << TUSB1210_VENDOR_SPECIFIC2_ZHSDRV_SHIFT; + if (!device_property_read_u8(&ulpi->dev, "zhsdrv", &val)) + u8p_replace_bits(®, val, (u8)TUSB1210_VENDOR_SPECIFIC2_ZHSDRV_MASK); /* DP/DM swap control */ - device_property_read_u8(&ulpi->dev, "datapolarity", &val); - reg |= val << TUSB1210_VENDOR_SPECIFIC2_DP_SHIFT; + if (!device_property_read_u8(&ulpi->dev, "datapolarity", &val)) + u8p_replace_bits(®, val, (u8)TUSB1210_VENDOR_SPECIFIC2_DP_MASK); - if (reg) { - ulpi_write(ulpi, TUSB1210_VENDOR_SPECIFIC2, reg); - tusb->vendor_specific2 = reg; - } + ulpi_write(ulpi, TUSB1210_VENDOR_SPECIFIC2, reg); + tusb->vendor_specific2 = reg; tusb->phy = ulpi_phy_create(ulpi, &phy_ops); if (IS_ERR(tusb->phy)) |