diff options
author | Vinod Koul <vkoul@kernel.org> | 2020-06-29 20:24:52 +0530 |
---|---|---|
committer | Vinod Koul <vkoul@kernel.org> | 2020-07-08 16:37:05 +0530 |
commit | 02dca8c981b552ad4caaa2e858800c78cc20f41c (patch) | |
tree | 9ba24b6462bac546e23f855436f34d3c3abb637d /drivers/phy/qualcomm/phy-qcom-ufs.c | |
parent | 1c59c2d95d3160a2af4a8655d19f56648b2dffa3 (diff) | |
download | linux-02dca8c981b552ad4caaa2e858800c78cc20f41c.tar.bz2 |
phy: qcom: remove ufs qmp phy driver
The UFS specific QMP PHY driver started off supporting the 14nm and
20nm hardware. With the 20nm support marked broken for a long time and
the 14nm support added to the common QMP PHY, this driver has not been
used in a while. So delete it
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200629145452.123035-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Diffstat (limited to 'drivers/phy/qualcomm/phy-qcom-ufs.c')
-rw-r--r-- | drivers/phy/qualcomm/phy-qcom-ufs.c | 648 |
1 files changed, 0 insertions, 648 deletions
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs.c b/drivers/phy/qualcomm/phy-qcom-ufs.c deleted file mode 100644 index 763c8d396af1..000000000000 --- a/drivers/phy/qualcomm/phy-qcom-ufs.c +++ /dev/null @@ -1,648 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. - */ - -#include "phy-qcom-ufs-i.h" - -#define MAX_PROP_NAME 32 -#define VDDA_PHY_MIN_UV 1000000 -#define VDDA_PHY_MAX_UV 1000000 -#define VDDA_PLL_MIN_UV 1800000 -#define VDDA_PLL_MAX_UV 1800000 -#define VDDP_REF_CLK_MIN_UV 1200000 -#define VDDP_REF_CLK_MAX_UV 1200000 - -int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, - struct ufs_qcom_phy_calibration *tbl_A, - int tbl_size_A, - struct ufs_qcom_phy_calibration *tbl_B, - int tbl_size_B, bool is_rate_B) -{ - int i; - int ret = 0; - - if (!tbl_A) { - dev_err(ufs_qcom_phy->dev, "%s: tbl_A is NULL", __func__); - ret = EINVAL; - goto out; - } - - for (i = 0; i < tbl_size_A; i++) - writel_relaxed(tbl_A[i].cfg_value, - ufs_qcom_phy->mmio + tbl_A[i].reg_offset); - - /* - * In case we would like to work in rate B, we need - * to override a registers that were configured in rate A table - * with registers of rate B table. - * table. - */ - if (is_rate_B) { - if (!tbl_B) { - dev_err(ufs_qcom_phy->dev, "%s: tbl_B is NULL", - __func__); - ret = EINVAL; - goto out; - } - - for (i = 0; i < tbl_size_B; i++) - writel_relaxed(tbl_B[i].cfg_value, - ufs_qcom_phy->mmio + tbl_B[i].reg_offset); - } - - /* flush buffered writes */ - mb(); - -out: - return ret; -} -EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate); - -/* - * This assumes the embedded phy structure inside generic_phy is of type - * struct ufs_qcom_phy. In order to function properly it's crucial - * to keep the embedded struct "struct ufs_qcom_phy common_cfg" - * as the first inside generic_phy. - */ -struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy) -{ - return (struct ufs_qcom_phy *)phy_get_drvdata(generic_phy); -} -EXPORT_SYMBOL_GPL(get_ufs_qcom_phy); - -static -int ufs_qcom_phy_base_init(struct platform_device *pdev, - struct ufs_qcom_phy *phy_common) -{ - struct device *dev = &pdev->dev; - struct resource *res; - int err = 0; - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_mem"); - phy_common->mmio = devm_ioremap_resource(dev, res); - if (IS_ERR((void const *)phy_common->mmio)) { - err = PTR_ERR((void const *)phy_common->mmio); - phy_common->mmio = NULL; - dev_err(dev, "%s: ioremap for phy_mem resource failed %d\n", - __func__, err); - return err; - } - - /* "dev_ref_clk_ctrl_mem" is optional resource */ - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "dev_ref_clk_ctrl_mem"); - phy_common->dev_ref_clk_ctrl_mmio = devm_ioremap_resource(dev, res); - if (IS_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio)) - phy_common->dev_ref_clk_ctrl_mmio = NULL; - - return 0; -} - -struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev, - struct ufs_qcom_phy *common_cfg, - const struct phy_ops *ufs_qcom_phy_gen_ops, - struct ufs_qcom_phy_specific_ops *phy_spec_ops) -{ - int err; - struct device *dev = &pdev->dev; - struct phy *generic_phy = NULL; - struct phy_provider *phy_provider; - - err = ufs_qcom_phy_base_init(pdev, common_cfg); - if (err) { - dev_err(dev, "%s: phy base init failed %d\n", __func__, err); - goto out; - } - - phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); - if (IS_ERR(phy_provider)) { - err = PTR_ERR(phy_provider); - dev_err(dev, "%s: failed to register phy %d\n", __func__, err); - goto out; - } - - generic_phy = devm_phy_create(dev, NULL, ufs_qcom_phy_gen_ops); - if (IS_ERR(generic_phy)) { - err = PTR_ERR(generic_phy); - dev_err(dev, "%s: failed to create phy %d\n", __func__, err); - generic_phy = NULL; - goto out; - } - - common_cfg->phy_spec_ops = phy_spec_ops; - common_cfg->dev = dev; - -out: - return generic_phy; -} -EXPORT_SYMBOL_GPL(ufs_qcom_phy_generic_probe); - -static int ufs_qcom_phy_get_reset(struct ufs_qcom_phy *phy_common) -{ - struct reset_control *reset; - - if (phy_common->ufs_reset) - return 0; - - reset = devm_reset_control_get_exclusive_by_index(phy_common->dev, 0); - if (IS_ERR(reset)) - return PTR_ERR(reset); - - phy_common->ufs_reset = reset; - return 0; -} - -static int __ufs_qcom_phy_clk_get(struct device *dev, - const char *name, struct clk **clk_out, bool err_print) -{ - struct clk *clk; - int err = 0; - - clk = devm_clk_get(dev, name); - if (IS_ERR(clk)) { - err = PTR_ERR(clk); - if (err_print) - dev_err(dev, "failed to get %s err %d", name, err); - } else { - *clk_out = clk; - } - - return err; -} - -static int ufs_qcom_phy_clk_get(struct device *dev, - const char *name, struct clk **clk_out) -{ - return __ufs_qcom_phy_clk_get(dev, name, clk_out, true); -} - -int ufs_qcom_phy_init_clks(struct ufs_qcom_phy *phy_common) -{ - int err; - - if (of_device_is_compatible(phy_common->dev->of_node, - "qcom,msm8996-ufs-phy-qmp-14nm")) - goto skip_txrx_clk; - - err = ufs_qcom_phy_clk_get(phy_common->dev, "tx_iface_clk", - &phy_common->tx_iface_clk); - if (err) - goto out; - - err = ufs_qcom_phy_clk_get(phy_common->dev, "rx_iface_clk", - &phy_common->rx_iface_clk); - if (err) - goto out; - -skip_txrx_clk: - err = ufs_qcom_phy_clk_get(phy_common->dev, "ref_clk_src", - &phy_common->ref_clk_src); - if (err) - goto out; - - /* - * "ref_clk_parent" is optional hence don't abort init if it's not - * found. - */ - __ufs_qcom_phy_clk_get(phy_common->dev, "ref_clk_parent", - &phy_common->ref_clk_parent, false); - - err = ufs_qcom_phy_clk_get(phy_common->dev, "ref_clk", - &phy_common->ref_clk); - -out: - return err; -} -EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_clks); - -static int ufs_qcom_phy_init_vreg(struct device *dev, - struct ufs_qcom_phy_vreg *vreg, - const char *name) -{ - int err = 0; - - char prop_name[MAX_PROP_NAME]; - - vreg->name = name; - vreg->reg = devm_regulator_get(dev, name); - if (IS_ERR(vreg->reg)) { - err = PTR_ERR(vreg->reg); - dev_err(dev, "failed to get %s, %d\n", name, err); - goto out; - } - - if (dev->of_node) { - snprintf(prop_name, MAX_PROP_NAME, "%s-max-microamp", name); - err = of_property_read_u32(dev->of_node, - prop_name, &vreg->max_uA); - if (err && err != -EINVAL) { - dev_err(dev, "%s: failed to read %s\n", - __func__, prop_name); - goto out; - } else if (err == -EINVAL || !vreg->max_uA) { - if (regulator_count_voltages(vreg->reg) > 0) { - dev_err(dev, "%s: %s is mandatory\n", - __func__, prop_name); - goto out; - } - err = 0; - } - } - - if (!strcmp(name, "vdda-pll")) { - vreg->max_uV = VDDA_PLL_MAX_UV; - vreg->min_uV = VDDA_PLL_MIN_UV; - } else if (!strcmp(name, "vdda-phy")) { - vreg->max_uV = VDDA_PHY_MAX_UV; - vreg->min_uV = VDDA_PHY_MIN_UV; - } else if (!strcmp(name, "vddp-ref-clk")) { - vreg->max_uV = VDDP_REF_CLK_MAX_UV; - vreg->min_uV = VDDP_REF_CLK_MIN_UV; - } - -out: - return err; -} - -int ufs_qcom_phy_init_vregulators(struct ufs_qcom_phy *phy_common) -{ - int err; - - err = ufs_qcom_phy_init_vreg(phy_common->dev, &phy_common->vdda_pll, - "vdda-pll"); - if (err) - goto out; - - err = ufs_qcom_phy_init_vreg(phy_common->dev, &phy_common->vdda_phy, - "vdda-phy"); - - if (err) - goto out; - - err = ufs_qcom_phy_init_vreg(phy_common->dev, &phy_common->vddp_ref_clk, - "vddp-ref-clk"); - -out: - return err; -} -EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_vregulators); - -static int ufs_qcom_phy_cfg_vreg(struct device *dev, - struct ufs_qcom_phy_vreg *vreg, bool on) -{ - int ret = 0; - struct regulator *reg = vreg->reg; - const char *name = vreg->name; - int min_uV; - int uA_load; - - if (regulator_count_voltages(reg) > 0) { - min_uV = on ? vreg->min_uV : 0; - ret = regulator_set_voltage(reg, min_uV, vreg->max_uV); - if (ret) { - dev_err(dev, "%s: %s set voltage failed, err=%d\n", - __func__, name, ret); - goto out; - } - uA_load = on ? vreg->max_uA : 0; - ret = regulator_set_load(reg, uA_load); - if (ret >= 0) { - /* - * regulator_set_load() returns new regulator - * mode upon success. - */ - ret = 0; - } else { - dev_err(dev, "%s: %s set optimum mode(uA_load=%d) failed, err=%d\n", - __func__, name, uA_load, ret); - goto out; - } - } -out: - return ret; -} - -static int ufs_qcom_phy_enable_vreg(struct device *dev, - struct ufs_qcom_phy_vreg *vreg) -{ - int ret = 0; - - if (!vreg || vreg->enabled) - goto out; - - ret = ufs_qcom_phy_cfg_vreg(dev, vreg, true); - if (ret) { - dev_err(dev, "%s: ufs_qcom_phy_cfg_vreg() failed, err=%d\n", - __func__, ret); - goto out; - } - - ret = regulator_enable(vreg->reg); - if (ret) { - dev_err(dev, "%s: enable failed, err=%d\n", - __func__, ret); - goto out; - } - - vreg->enabled = true; -out: - return ret; -} - -static int ufs_qcom_phy_enable_ref_clk(struct ufs_qcom_phy *phy) -{ - int ret = 0; - - if (phy->is_ref_clk_enabled) - goto out; - - /* - * reference clock is propagated in a daisy-chained manner from - * source to phy, so ungate them at each stage. - */ - ret = clk_prepare_enable(phy->ref_clk_src); - if (ret) { - dev_err(phy->dev, "%s: ref_clk_src enable failed %d\n", - __func__, ret); - goto out; - } - - /* - * "ref_clk_parent" is optional clock hence make sure that clk reference - * is available before trying to enable the clock. - */ - if (phy->ref_clk_parent) { - ret = clk_prepare_enable(phy->ref_clk_parent); - if (ret) { - dev_err(phy->dev, "%s: ref_clk_parent enable failed %d\n", - __func__, ret); - goto out_disable_src; - } - } - - ret = clk_prepare_enable(phy->ref_clk); - if (ret) { - dev_err(phy->dev, "%s: ref_clk enable failed %d\n", - __func__, ret); - goto out_disable_parent; - } - - phy->is_ref_clk_enabled = true; - goto out; - -out_disable_parent: - if (phy->ref_clk_parent) - clk_disable_unprepare(phy->ref_clk_parent); -out_disable_src: - clk_disable_unprepare(phy->ref_clk_src); -out: - return ret; -} - -static int ufs_qcom_phy_disable_vreg(struct device *dev, - struct ufs_qcom_phy_vreg *vreg) -{ - int ret = 0; - - if (!vreg || !vreg->enabled) - goto out; - - ret = regulator_disable(vreg->reg); - - if (!ret) { - /* ignore errors on applying disable config */ - ufs_qcom_phy_cfg_vreg(dev, vreg, false); - vreg->enabled = false; - } else { - dev_err(dev, "%s: %s disable failed, err=%d\n", - __func__, vreg->name, ret); - } -out: - return ret; -} - -static void ufs_qcom_phy_disable_ref_clk(struct ufs_qcom_phy *phy) -{ - if (phy->is_ref_clk_enabled) { - clk_disable_unprepare(phy->ref_clk); - /* - * "ref_clk_parent" is optional clock hence make sure that clk - * reference is available before trying to disable the clock. - */ - if (phy->ref_clk_parent) - clk_disable_unprepare(phy->ref_clk_parent); - clk_disable_unprepare(phy->ref_clk_src); - phy->is_ref_clk_enabled = false; - } -} - -/* Turn ON M-PHY RMMI interface clocks */ -static int ufs_qcom_phy_enable_iface_clk(struct ufs_qcom_phy *phy) -{ - int ret = 0; - - if (phy->is_iface_clk_enabled) - goto out; - - ret = clk_prepare_enable(phy->tx_iface_clk); - if (ret) { - dev_err(phy->dev, "%s: tx_iface_clk enable failed %d\n", - __func__, ret); - goto out; - } - ret = clk_prepare_enable(phy->rx_iface_clk); - if (ret) { - clk_disable_unprepare(phy->tx_iface_clk); - dev_err(phy->dev, "%s: rx_iface_clk enable failed %d. disabling also tx_iface_clk\n", - __func__, ret); - goto out; - } - phy->is_iface_clk_enabled = true; - -out: - return ret; -} - -/* Turn OFF M-PHY RMMI interface clocks */ -static void ufs_qcom_phy_disable_iface_clk(struct ufs_qcom_phy *phy) -{ - if (phy->is_iface_clk_enabled) { - clk_disable_unprepare(phy->tx_iface_clk); - clk_disable_unprepare(phy->rx_iface_clk); - phy->is_iface_clk_enabled = false; - } -} - -static int ufs_qcom_phy_start_serdes(struct ufs_qcom_phy *ufs_qcom_phy) -{ - int ret = 0; - - if (!ufs_qcom_phy->phy_spec_ops->start_serdes) { - dev_err(ufs_qcom_phy->dev, "%s: start_serdes() callback is not supported\n", - __func__); - ret = -ENOTSUPP; - } else { - ufs_qcom_phy->phy_spec_ops->start_serdes(ufs_qcom_phy); - } - - return ret; -} - -int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes) -{ - struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); - int ret = 0; - - if (!ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable) { - dev_err(ufs_qcom_phy->dev, "%s: set_tx_lane_enable() callback is not supported\n", - __func__); - ret = -ENOTSUPP; - } else { - ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable(ufs_qcom_phy, - tx_lanes); - } - - return ret; -} -EXPORT_SYMBOL_GPL(ufs_qcom_phy_set_tx_lane_enable); - -void ufs_qcom_phy_save_controller_version(struct phy *generic_phy, - u8 major, u16 minor, u16 step) -{ - struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); - - ufs_qcom_phy->host_ctrl_rev_major = major; - ufs_qcom_phy->host_ctrl_rev_minor = minor; - ufs_qcom_phy->host_ctrl_rev_step = step; -} -EXPORT_SYMBOL_GPL(ufs_qcom_phy_save_controller_version); - -static int ufs_qcom_phy_is_pcs_ready(struct ufs_qcom_phy *ufs_qcom_phy) -{ - if (!ufs_qcom_phy->phy_spec_ops->is_physical_coding_sublayer_ready) { - dev_err(ufs_qcom_phy->dev, "%s: is_physical_coding_sublayer_ready() callback is not supported\n", - __func__); - return -ENOTSUPP; - } - - return ufs_qcom_phy->phy_spec_ops-> - is_physical_coding_sublayer_ready(ufs_qcom_phy); -} - -int ufs_qcom_phy_power_on(struct phy *generic_phy) -{ - struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); - struct device *dev = phy_common->dev; - bool is_rate_B = false; - int err; - - err = ufs_qcom_phy_get_reset(phy_common); - if (err) - return err; - - err = reset_control_assert(phy_common->ufs_reset); - if (err) - return err; - - if (phy_common->mode == PHY_MODE_UFS_HS_B) - is_rate_B = true; - - err = phy_common->phy_spec_ops->calibrate(phy_common, is_rate_B); - if (err) - return err; - - err = reset_control_deassert(phy_common->ufs_reset); - if (err) { - dev_err(dev, "Failed to assert UFS PHY reset"); - return err; - } - - err = ufs_qcom_phy_start_serdes(phy_common); - if (err) - return err; - - err = ufs_qcom_phy_is_pcs_ready(phy_common); - if (err) - return err; - - err = ufs_qcom_phy_enable_vreg(dev, &phy_common->vdda_phy); - if (err) { - dev_err(dev, "%s enable vdda_phy failed, err=%d\n", - __func__, err); - goto out; - } - - phy_common->phy_spec_ops->power_control(phy_common, true); - - /* vdda_pll also enables ref clock LDOs so enable it first */ - err = ufs_qcom_phy_enable_vreg(dev, &phy_common->vdda_pll); - if (err) { - dev_err(dev, "%s enable vdda_pll failed, err=%d\n", - __func__, err); - goto out_disable_phy; - } - - err = ufs_qcom_phy_enable_iface_clk(phy_common); - if (err) { - dev_err(dev, "%s enable phy iface clock failed, err=%d\n", - __func__, err); - goto out_disable_pll; - } - - err = ufs_qcom_phy_enable_ref_clk(phy_common); - if (err) { - dev_err(dev, "%s enable phy ref clock failed, err=%d\n", - __func__, err); - goto out_disable_iface_clk; - } - - /* enable device PHY ref_clk pad rail */ - if (phy_common->vddp_ref_clk.reg) { - err = ufs_qcom_phy_enable_vreg(dev, - &phy_common->vddp_ref_clk); - if (err) { - dev_err(dev, "%s enable vddp_ref_clk failed, err=%d\n", - __func__, err); - goto out_disable_ref_clk; - } - } - - goto out; - -out_disable_ref_clk: - ufs_qcom_phy_disable_ref_clk(phy_common); -out_disable_iface_clk: - ufs_qcom_phy_disable_iface_clk(phy_common); -out_disable_pll: - ufs_qcom_phy_disable_vreg(dev, &phy_common->vdda_pll); -out_disable_phy: - ufs_qcom_phy_disable_vreg(dev, &phy_common->vdda_phy); -out: - return err; -} -EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_on); - -int ufs_qcom_phy_power_off(struct phy *generic_phy) -{ - struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); - - phy_common->phy_spec_ops->power_control(phy_common, false); - - if (phy_common->vddp_ref_clk.reg) - ufs_qcom_phy_disable_vreg(phy_common->dev, - &phy_common->vddp_ref_clk); - ufs_qcom_phy_disable_ref_clk(phy_common); - ufs_qcom_phy_disable_iface_clk(phy_common); - - ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_pll); - ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_phy); - reset_control_assert(phy_common->ufs_reset); - return 0; -} -EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_off); - -MODULE_AUTHOR("Yaniv Gardi <ygardi@codeaurora.org>"); -MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>"); -MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY"); -MODULE_LICENSE("GPL v2"); |