ARM: pxa: move pcmcia board data into mach-pxa

The drivers/pcmcia/pxa2xx_*.c are essentially part of the
board files, but for historic reasons located in drivers/pcmcia.

Move them into the same place as the actual board file to avoid
lots of machine header inclusions.

Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 118 deletions

diff --git a/drivers/pcmcia/pxa2xx_hx4700.c b/drivers/pcmcia/pxa2xx_hx4700.c
deleted file mode 100644
index 87b6a1639d94..000000000000
--- a/drivers/pcmcia/pxa2xx_hx4700.c
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2012 Paul Parsons <lost.distance@yahoo.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <mach/hx4700.h>
-
-#include "soc_common.h"
-
-static struct gpio gpios[] = {
-	{ GPIO114_HX4700_CF_RESET,    GPIOF_OUT_INIT_LOW,   "CF reset"        },
-	{ EGPIO4_CF_3V3_ON,           GPIOF_OUT_INIT_LOW,   "CF 3.3V enable"  },
-};
-
-static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(gpios, ARRAY_SIZE(gpios));
-	if (ret)
-		goto out;
-
-	/*
-	 * IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
-	 * The asic3 default IRQ type is level trigger low level detect, exactly
-	 * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
-	 * If the IRQ type is not changed, the asic3 interrupt handler will loop
-	 * repeatedly because it is unable to clear the level trigger interrupt.
-	 */
-	irq_set_irq_type(gpio_to_irq(GPIOD4_CF_nCD), IRQ_TYPE_EDGE_BOTH);
-
-	skt->stat[SOC_STAT_CD].gpio = GPIOD4_CF_nCD;
-	skt->stat[SOC_STAT_CD].name = "PCMCIA CD";
-	skt->stat[SOC_STAT_RDY].gpio = GPIO60_HX4700_CF_RNB;
-	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-
-out:
-	return ret;
-}
-
-static void hx4700_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(gpios, ARRAY_SIZE(gpios));
-}
-
-static void hx4700_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-	struct pcmcia_state *state)
-{
-	state->vs_3v = 1;
-	state->vs_Xv = 0;
-}
-
-static int hx4700_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-	const socket_state_t *state)
-{
-	switch (state->Vcc) {
-	case 0:
-		gpio_set_value(EGPIO4_CF_3V3_ON, 0);
-		break;
-	case 33:
-		gpio_set_value(EGPIO4_CF_3V3_ON, 1);
-		break;
-	default:
-		printk(KERN_ERR "pcmcia: Unsupported Vcc: %d\n", state->Vcc);
-		return -EINVAL;
-	}
-
-	gpio_set_value(GPIO114_HX4700_CF_RESET, (state->flags & SS_RESET) != 0);
-
-	return 0;
-}
-
-static struct pcmcia_low_level hx4700_pcmcia_ops = {
-	.owner          = THIS_MODULE,
-	.nr             = 1,
-	.hw_init        = hx4700_pcmcia_hw_init,
-	.hw_shutdown    = hx4700_pcmcia_hw_shutdown,
-	.socket_state   = hx4700_pcmcia_socket_state,
-	.configure_socket = hx4700_pcmcia_configure_socket,
-};
-
-static struct platform_device *hx4700_pcmcia_device;
-
-static int __init hx4700_pcmcia_init(void)
-{
-	struct platform_device *pdev;
-
-	if (!machine_is_h4700())
-		return -ENODEV;
-
-	pdev = platform_device_register_data(NULL, "pxa2xx-pcmcia", -1,
-		&hx4700_pcmcia_ops, sizeof(hx4700_pcmcia_ops));
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	hx4700_pcmcia_device = pdev;
-
-	return 0;
-}
-
-static void __exit hx4700_pcmcia_exit(void)
-{
-	platform_device_unregister(hx4700_pcmcia_device);
-}
-
-module_init(hx4700_pcmcia_init);
-module_exit(hx4700_pcmcia_exit);
-
-MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>");
-MODULE_DESCRIPTION("HP iPAQ hx4700 PCMCIA driver");
-MODULE_LICENSE("GPL");