ice: Add support for dynamic interrupt moderation

Currently there is no support for dynamic interrupt moderation. This
patch adds some initial code to support this. The following changes
were made:

1. Currently we are using multiple members to store the interrupt
   granularity (itr_gran_25/50/100/200). This is not necessary because
   we can query the device to determine what the interrupt granularity
   should be set to, done by a new function ice_get_itr_intrl_gran.

2. Added intrl to ice_q_vector structure to support interrupt rate
   limiting.

3. Added the function ice_intrl_usecs_to_reg for converting to a value
   in usecs that the device understands.

4. Added call to write to the GLINT_RATE register. Disable intrl by
   default for now.

5. Changed rx/tx_itr_setting to itr_setting because having both seems
   redundant because a ring is either Tx or Rx.

6. Initialize itr_setting for both Tx/Rx rings in ice_vsi_alloc_rings()

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

7 files changed, 102 insertions, 24 deletions

diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
index fc6bc1233f10..0b269c470343 100644
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@ -230,6 +230,10 @@ struct ice_q_vector {
 	u8 num_ring_tx;			/* total number of tx rings in vector */
 	u8 num_ring_rx;			/* total number of rx rings in vector */
 	char name[ICE_INT_NAME_STR_LEN];
+	/* in usecs, need to use ice_intrl_to_usecs_reg() before writing this
+	 * value to the device
+	 */
+	u8 intrl;
 } ____cacheline_internodealigned_in_smp;
 
 enum ice_pf_flags {
diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index 9ff291375869..68fbbb92d504 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -598,6 +598,39 @@ void ice_output_fw_log(struct ice_hw *hw, struct ice_aq_desc *desc, void *buf)
 }
 
 /**
+ * ice_get_itr_intrl_gran - determine int/intrl granularity
+ * @hw: pointer to the hw struct
+ *
+ * Determines the itr/intrl granularities based on the maximum aggregate
+ * bandwidth according to the device's configuration during power-on.
+ */
+static enum ice_status ice_get_itr_intrl_gran(struct ice_hw *hw)
+{
+	u8 max_agg_bw = (rd32(hw, GL_PWR_MODE_CTL) &
+			 GL_PWR_MODE_CTL_CAR_MAX_BW_M) >>
+			GL_PWR_MODE_CTL_CAR_MAX_BW_S;
+
+	switch (max_agg_bw) {
+	case ICE_MAX_AGG_BW_200G:
+	case ICE_MAX_AGG_BW_100G:
+	case ICE_MAX_AGG_BW_50G:
+		hw->itr_gran = ICE_ITR_GRAN_ABOVE_25;
+		hw->intrl_gran = ICE_INTRL_GRAN_ABOVE_25;
+		break;
+	case ICE_MAX_AGG_BW_25G:
+		hw->itr_gran = ICE_ITR_GRAN_MAX_25;
+		hw->intrl_gran = ICE_INTRL_GRAN_MAX_25;
+		break;
+	default:
+		ice_debug(hw, ICE_DBG_INIT,
+			  "Failed to determine itr/intrl granularity\n");
+		return ICE_ERR_CFG;
+	}
+
+	return 0;
+}
+
+/**
  * ice_init_hw - main hardware initialization routine
  * @hw: pointer to the hardware structure
  */
@@ -621,11 +654,9 @@ enum ice_status ice_init_hw(struct ice_hw *hw)
 	if (status)
 		return status;
 
-	/* set these values to minimum allowed */
-	hw->itr_gran_200 = ICE_ITR_GRAN_MIN_200;
-	hw->itr_gran_100 = ICE_ITR_GRAN_MIN_100;
-	hw->itr_gran_50 = ICE_ITR_GRAN_MIN_50;
-	hw->itr_gran_25 = ICE_ITR_GRAN_MIN_25;
+	status = ice_get_itr_intrl_gran(hw);
+	if (status)
+		return status;
 
 	status = ice_init_all_ctrlq(hw);
 	if (status)
diff --git a/drivers/net/ethernet/intel/ice/ice_hw_autogen.h b/drivers/net/ethernet/intel/ice/ice_hw_autogen.h
index 88f11498804b..9a78d83eaa3e 100644
--- a/drivers/net/ethernet/intel/ice/ice_hw_autogen.h
+++ b/drivers/net/ethernet/intel/ice/ice_hw_autogen.h
@@ -88,6 +88,8 @@
 #define GLINT_DYN_CTL_SW_ITR_INDX_M		ICE_M(0x3, 25)
 #define GLINT_DYN_CTL_INTENA_MSK_M		BIT(31)
 #define GLINT_ITR(_i, _INT)			(0x00154000 + ((_i) * 8192 + (_INT) * 4))
+#define GLINT_RATE(_INT)			(0x0015A000 + ((_INT) * 4))
+#define GLINT_RATE_INTRL_ENA_M			BIT(6)
 #define PFINT_FW_CTL				0x0016C800
 #define PFINT_FW_CTL_MSIX_INDX_M		ICE_M(0x7FF, 0)
 #define PFINT_FW_CTL_ITR_INDX_S			11
@@ -173,6 +175,9 @@
 #define PF_FUNC_RID				0x0009E880
 #define PF_FUNC_RID_FUNC_NUM_S			0
 #define PF_FUNC_RID_FUNC_NUM_M			ICE_M(0x7, 0)
+#define GL_PWR_MODE_CTL				0x000B820C
+#define GL_PWR_MODE_CTL_CAR_MAX_BW_S		30
+#define GL_PWR_MODE_CTL_CAR_MAX_BW_M		ICE_M(0x3, 30)
 #define GLPRT_BPRCH(_i)				(0x00381384 + ((_i) * 8))
 #define GLPRT_BPRCL(_i)				(0x00381380 + ((_i) * 8))
 #define GLPRT_BPTCH(_i)				(0x00381244 + ((_i) * 8))
diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index 98e8b7096e47..acf3478a3f3b 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -1139,6 +1139,7 @@ static int ice_vsi_alloc_rings(struct ice_vsi *vsi)
 		ring->vsi = vsi;
 		ring->dev = &pf->pdev->dev;
 		ring->count = vsi->num_desc;
+		ring->itr_setting = ICE_DFLT_TX_ITR;
 		vsi->tx_rings[i] = ring;
 	}
 
@@ -1158,6 +1159,7 @@ static int ice_vsi_alloc_rings(struct ice_vsi *vsi)
 		ring->netdev = vsi->netdev;
 		ring->dev = &pf->pdev->dev;
 		ring->count = vsi->num_desc;
+		ring->itr_setting = ICE_DFLT_RX_ITR;
 		vsi->rx_rings[i] = ring;
 	}
 
@@ -1596,6 +1598,23 @@ err_cfg_txqs:
 }
 
 /**
+ * ice_intrl_usec_to_reg - convert interrupt rate limit to register value
+ * @intrl: interrupt rate limit in usecs
+ * @gran: interrupt rate limit granularity in usecs
+ *
+ * This function converts a decimal interrupt rate limit in usecs to the format
+ * expected by firmware.
+ */
+static u32 ice_intrl_usec_to_reg(u8 intrl, u8 gran)
+{
+	u32 val = intrl / gran;
+
+	if (val)
+		return val | GLINT_RATE_INTRL_ENA_M;
+	return 0;
+}
+
+/**
  * ice_vsi_cfg_msix - MSIX mode Interrupt Config in the HW
  * @vsi: the VSI being configured
  */
@@ -1611,23 +1630,27 @@ void ice_vsi_cfg_msix(struct ice_vsi *vsi)
 	for (i = 0; i < vsi->num_q_vectors; i++, vector++) {
 		struct ice_q_vector *q_vector = vsi->q_vectors[i];
 
-		itr_gran = hw->itr_gran_200;
+		itr_gran = hw->itr_gran;
+
+		q_vector->intrl = ICE_DFLT_INTRL;
 
 		if (q_vector->num_ring_rx) {
 			q_vector->rx.itr =
-				ITR_TO_REG(vsi->rx_rings[rxq]->rx_itr_setting,
+				ITR_TO_REG(vsi->rx_rings[rxq]->itr_setting,
 					   itr_gran);
 			q_vector->rx.latency_range = ICE_LOW_LATENCY;
 		}
 
 		if (q_vector->num_ring_tx) {
 			q_vector->tx.itr =
-				ITR_TO_REG(vsi->tx_rings[txq]->tx_itr_setting,
+				ITR_TO_REG(vsi->tx_rings[txq]->itr_setting,
 					   itr_gran);
 			q_vector->tx.latency_range = ICE_LOW_LATENCY;
 		}
 		wr32(hw, GLINT_ITR(ICE_RX_ITR, vector), q_vector->rx.itr);
 		wr32(hw, GLINT_ITR(ICE_TX_ITR, vector), q_vector->tx.itr);
+		wr32(hw, GLINT_RATE(vector),
+		     ice_intrl_usec_to_reg(q_vector->intrl, hw->intrl_gran));
 
 		/* Both Transmit Queue Interrupt Cause Control register
 		 * and Receive Queue Interrupt Cause control register
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index f51857ead0f3..9638684f75ac 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -1406,7 +1406,7 @@ skip_req_irq:
 	       PFINT_FW_CTL_CAUSE_ENA_M);
 	wr32(hw, PFINT_FW_CTL, val);
 
-	itr_gran = hw->itr_gran_200;
+	itr_gran = hw->itr_gran;
 
 	wr32(hw, GLINT_ITR(ICE_RX_ITR, pf->hw_oicr_idx),
 	     ITR_TO_REG(ICE_ITR_8K, itr_gran));
diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.h b/drivers/net/ethernet/intel/ice/ice_txrx.h
index 839fd9ff6043..a9b92974e041 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.h
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.h
@@ -104,10 +104,16 @@ enum ice_rx_dtype {
 #define ICE_RX_ITR	ICE_IDX_ITR0
 #define ICE_TX_ITR	ICE_IDX_ITR1
 #define ICE_ITR_DYNAMIC	0x8000  /* use top bit as a flag */
-#define ICE_ITR_8K	0x003E
+#define ICE_ITR_8K	125
+#define ICE_DFLT_TX_ITR	ICE_ITR_8K
+#define ICE_DFLT_RX_ITR	ICE_ITR_8K
+/* apply ITR granularity translation to program the register. itr_gran is either
+ * 2 or 4 usecs so we need to divide by 2 first then shift by that value
+ */
+#define ITR_TO_REG(val, itr_gran) (((val) & ~ICE_ITR_DYNAMIC) >> \
+				   ((itr_gran) / 2))
 
-/* apply ITR HW granularity translation to program the HW registers */
-#define ITR_TO_REG(val, itr_gran) (((val) & ~ICE_ITR_DYNAMIC) >> (itr_gran))
+#define ICE_DFLT_INTRL	0
 
 /* Legacy or Advanced Mode Queue */
 #define ICE_TX_ADVANCED	0
@@ -130,12 +136,11 @@ struct ice_ring {
 	u32 txq_teid;			/* Added Tx queue TEID */
 
 	/* high bit set means dynamic, use accessor routines to read/write.
-	 * hardware supports 2us/1us resolution for the ITR registers.
+	 * hardware supports 4us/2us resolution for the ITR registers.
 	 * these values always store the USER setting, and must be converted
 	 * before programming to a register.
 	 */
-	u16 rx_itr_setting;
-	u16 tx_itr_setting;
+	u16 itr_setting;
 
 	u16 count;			/* Number of descriptors */
 	u16 reg_idx;			/* HW register index of the ring */
diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h
index 87930f68d3fb..f5c8de0ed0eb 100644
--- a/drivers/net/ethernet/intel/ice/ice_type.h
+++ b/drivers/net/ethernet/intel/ice/ice_type.h
@@ -333,16 +333,26 @@ struct ice_hw {
 	u32 fw_build;		/* firmware build number */
 
 	struct ice_fw_log_cfg fw_log;
-	/* minimum allowed value for different speeds */
-#define ICE_ITR_GRAN_MIN_200	1
-#define ICE_ITR_GRAN_MIN_100	1
-#define ICE_ITR_GRAN_MIN_50	2
-#define ICE_ITR_GRAN_MIN_25	4
+
+/* Device max aggregate bandwidths corresponding to the GL_PWR_MODE_CTL
+ * register. Used for determining the itr/intrl granularity during
+ * initialization.
+ */
+#define ICE_MAX_AGG_BW_200G	0x0
+#define ICE_MAX_AGG_BW_100G	0X1
+#define ICE_MAX_AGG_BW_50G	0x2
+#define ICE_MAX_AGG_BW_25G	0x3
+	/* ITR granularity for different speeds */
+#define ICE_ITR_GRAN_ABOVE_25	2
+#define ICE_ITR_GRAN_MAX_25	4
 	/* ITR granularity in 1 us */
-	u8 itr_gran_200;
-	u8 itr_gran_100;
-	u8 itr_gran_50;
-	u8 itr_gran_25;
+	u8 itr_gran;
+	/* INTRL granularity for different speeds */
+#define ICE_INTRL_GRAN_ABOVE_25	4
+#define ICE_INTRL_GRAN_MAX_25	8
+	/* INTRL granularity in 1 us */
+	u8 intrl_gran;
+
 	u8 ucast_shared;	/* true if VSIs can share unicast addr */
 
 };