diff options
author | Ivo van Doorn <IvDoorn@gmail.com> | 2011-04-18 15:27:06 +0200 |
---|---|---|
committer | John W. Linville <linville@tuxdriver.com> | 2011-04-19 15:39:11 -0400 |
commit | 7dab73b37f5e8885cb73efd25e73861f9b4f0246 (patch) | |
tree | 3c09412e1ec0b02eaf193879aed12db0f9874f7c /drivers/net/wireless/rt2x00/rt61pci.c | |
parent | 62fe778412b36791b7897cfa139342906fbbf07b (diff) | |
download | linux-7dab73b37f5e8885cb73efd25e73861f9b4f0246.tar.bz2 |
rt2x00: Split rt2x00dev->flags
The number of flags defined for the rt2x00dev->flags field,
has been growing over the years. Currently we are approaching
the maximum number of bits which are available in the field.
A secondary problem, is that one part of the field are initialized only
during boot, because the driver requirements are initialized or device
requirements are loaded from the EEPROM. In both cases, the flags are
fixed and will not change during device operation. The other flags are
the device state, and will change frequently. So far this resulted in the fact
that for some flags, the atomic bit accessors are used, while for the others
the non-atomic variants are used.
By splitting the flags up into a "flags" and "cap_flags" we can put all flags
which are fixed inside "cap_flags". This field can then be read non-atomically.
In the "flags" field we keep the device state, which is going to be read atomically.
This adds more room for more flags in the future, and sanitizes the field access methods.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt61pci.c')
-rw-r--r-- | drivers/net/wireless/rt2x00/rt61pci.c | 42 |
1 files changed, 21 insertions, 21 deletions
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 8ee1514a7943..c16c1501df18 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -683,7 +683,7 @@ static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev, rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, rt2x00_rf(rt2x00dev, RF2529)); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, - !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags)); + !test_bit(CAPABILITY_FRAME_TYPE, &rt2x00dev->cap_flags)); /* * Configure the RX antenna. @@ -811,10 +811,10 @@ static void rt61pci_config_ant(struct rt2x00_dev *rt2x00dev, if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { sel = antenna_sel_a; - lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); + lna = test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags); } else { sel = antenna_sel_bg; - lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); + lna = test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags); } for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++) @@ -834,7 +834,7 @@ static void rt61pci_config_ant(struct rt2x00_dev *rt2x00dev, else if (rt2x00_rf(rt2x00dev, RF2527)) rt61pci_config_antenna_2x(rt2x00dev, ant); else if (rt2x00_rf(rt2x00dev, RF2529)) { - if (test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags)) + if (test_bit(CAPABILITY_DOUBLE_ANTENNA, &rt2x00dev->cap_flags)) rt61pci_config_antenna_2x(rt2x00dev, ant); else rt61pci_config_antenna_2529(rt2x00dev, ant); @@ -848,13 +848,13 @@ static void rt61pci_config_lna_gain(struct rt2x00_dev *rt2x00dev, short lna_gain = 0; if (libconf->conf->channel->band == IEEE80211_BAND_2GHZ) { - if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) + if (test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags)) lna_gain += 14; rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); } else { - if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) + if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags)) lna_gain += 14; rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); @@ -1050,14 +1050,14 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev, if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { low_bound = 0x28; up_bound = 0x48; - if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) { + if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags)) { low_bound += 0x10; up_bound += 0x10; } } else { low_bound = 0x20; up_bound = 0x40; - if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) { + if (test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags)) { low_bound += 0x10; up_bound += 0x10; } @@ -2537,7 +2537,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * Determine number of antennas. */ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_NUM) == 2) - __set_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags); + __set_bit(CAPABILITY_DOUBLE_ANTENNA, &rt2x00dev->cap_flags); /* * Identify default antenna configuration. @@ -2551,20 +2551,20 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * Read the Frame type. */ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE)) - __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags); + __set_bit(CAPABILITY_FRAME_TYPE, &rt2x00dev->cap_flags); /* * Detect if this device has a hardware controlled radio. */ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) - __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); + __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags); /* * Read frequency offset and RF programming sequence. */ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom); if (rt2x00_get_field16(eeprom, EEPROM_FREQ_SEQ)) - __set_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags); + __set_bit(CAPABILITY_RF_SEQUENCE, &rt2x00dev->cap_flags); rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET); @@ -2574,9 +2574,9 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A)) - __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); + __set_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags); if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG)) - __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); + __set_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags); /* * When working with a RF2529 chip without double antenna, @@ -2584,7 +2584,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * eeprom word. */ if (rt2x00_rf(rt2x00dev, RF2529) && - !test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags)) { + !test_bit(CAPABILITY_DOUBLE_ANTENNA, &rt2x00dev->cap_flags)) { rt2x00dev->default_ant.rx = ANTENNA_A + rt2x00_get_field16(eeprom, EEPROM_NIC_RX_FIXED); rt2x00dev->default_ant.tx = @@ -2799,7 +2799,7 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) spec->supported_bands = SUPPORT_BAND_2GHZ; spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - if (!test_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags)) { + if (!test_bit(CAPABILITY_RF_SEQUENCE, &rt2x00dev->cap_flags)) { spec->num_channels = 14; spec->channels = rf_vals_noseq; } else { @@ -2869,16 +2869,16 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) * This device has multiple filters for control frames, * but has no a separate filter for PS Poll frames. */ - __set_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags); + __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags); /* * This device requires firmware and DMA mapped skbs. */ - __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); - __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); + __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags); + __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags); if (!modparam_nohwcrypt) - __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); - __set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags); + __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags); + __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags); /* * Set the rssi offset. |