summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/iwlwifi/mvm/fw-api.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-11-04 09:41:05 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2015-11-04 09:41:05 -0800
commitb0f85fa11aefc4f3e03306b4cd47f113bd57dcba (patch)
tree1333d36d99fde3f97210795941fc246f0ad08a75 /drivers/net/wireless/iwlwifi/mvm/fw-api.h
parentccc9d4a6d640cbde05d519edeb727881646cf71b (diff)
parentf32bfb9a8ca083f8d148ea90ae5ba66f4831836e (diff)
downloadlinux-b0f85fa11aefc4f3e03306b4cd47f113bd57dcba.tar.bz2
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: Changes of note: 1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell. 2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from David Ahern. 3) Allow the user to ask for the statistics to be filtered out of ipv4/ipv6 address netlink dumps. From Sowmini Varadhan. 4) More work to pass the network namespace context around deep into various packet path APIs, starting with the netfilter hooks. From Eric W Biederman. 5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas Richter. 6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng. 7) Support Very High Throughput in wireless MESH code, from Bob Copeland. 8) Allow setting the ageing_time in switchdev/rocker. From Scott Feldman. 9) Properly autoload L2TP type modules, from Stephen Hemminger. 10) Fix and enable offload features by default in 8139cp driver, from David Woodhouse. 11) Support both ipv4 and ipv6 sockets in a single vxlan device, from Jiri Benc. 12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning Opstad. 13) Fix IPSEC flowcache overflows on large systems, from Steffen Klassert. 14) Convert bridging to track VLANs using rhashtable entries rather than a bitmap. From Nikolay Aleksandrov. 15) Make TCP listener handling completely lockless, this is a major accomplishment. Incoming request sockets now live in the established hash table just like any other socket too. From Eric Dumazet. 15) Provide more bridging attributes to netlink, from Nikolay Aleksandrov. 16) Use hash based algorithm for ipv4 multipath routing, this was very long overdue. From Peter Nørlund. 17) Several y2038 cures, mostly avoiding timespec. From Arnd Bergmann. 18) Allow non-root execution of EBPF programs, from Alexei Starovoitov. 19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet. This influences the port binding selection logic used by SO_REUSEPORT. 20) Add ipv6 support to VRF, from David Ahern. 21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko. 22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen. 23) Implement RACK loss recovery in TCP, from Yuchung Cheng. 24) Support multipath routes in MPLS, from Roopa Prabhu. 25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric Dumazet. 26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and Sudarsana Kalluru. 27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic Sowa. 28) Support ipv6 geneve tunnels, from John W Linville. 29) Add flood control support to switchdev layer, from Ido Schimmel. 30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from Hannes Frederic Sowa. 31) Support persistent maps and progs in bpf, from Daniel Borkmann. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits) sh_eth: use DMA barriers switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion net: sched: kill dead code in sch_choke.c irda: Delete an unnecessary check before the function call "irlmp_unregister_service" net: dsa: mv88e6xxx: include DSA ports in VLANs net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports net/core: fix for_each_netdev_feature vlan: Invoke driver vlan hooks only if device is present arcnet/com20020: add LEDS_CLASS dependency bpf, verifier: annotate verbose printer with __printf dp83640: Only wait for timestamps for packets with timestamping enabled. ptp: Change ptp_class to a proper bitmask dp83640: Prune rx timestamp list before reading from it dp83640: Delay scheduled work. dp83640: Include hash in timestamp/packet matching ipv6: fix tunnel error handling net/mlx5e: Fix LSO vlan insertion net/mlx5e: Re-eanble client vlan TX acceleration net/mlx5e: Return error in case mlx5e_set_features() fails net/mlx5e: Don't allow more than max supported channels ...
Diffstat (limited to 'drivers/net/wireless/iwlwifi/mvm/fw-api.h')
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/fw-api.h259
1 files changed, 75 insertions, 184 deletions
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index 4af7513adda2..181590fbd3b3 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -67,6 +67,7 @@
#define __fw_api_h__
#include "fw-api-rs.h"
+#include "fw-api-rx.h"
#include "fw-api-tx.h"
#include "fw-api-sta.h"
#include "fw-api-mac.h"
@@ -100,6 +101,7 @@ enum iwl_mvm_tx_fifo {
enum {
MVM_ALIVE = 0x1,
REPLY_ERROR = 0x2,
+ ECHO_CMD = 0x3,
INIT_COMPLETE_NOTIF = 0x4,
@@ -266,6 +268,16 @@ enum {
REPLY_MAX = 0xff,
};
+enum iwl_phy_ops_subcmd_ids {
+ CMD_DTS_MEASUREMENT_TRIGGER_WIDE = 0x0,
+ DTS_MEASUREMENT_NOTIF_WIDE = 0xFF,
+};
+
+/* command groups */
+enum {
+ PHY_OPS_GROUP = 0x4,
+};
+
/**
* struct iwl_cmd_response - generic response struct for most commands
* @status: status of the command asked, changes for each one
@@ -1070,190 +1082,6 @@ struct iwl_hs20_roc_res {
__le32 status;
} __packed; /* HOT_SPOT_RSP_API_S_VER_1 */
-#define IWL_RX_INFO_PHY_CNT 8
-#define IWL_RX_INFO_ENERGY_ANT_ABC_IDX 1
-#define IWL_RX_INFO_ENERGY_ANT_A_MSK 0x000000ff
-#define IWL_RX_INFO_ENERGY_ANT_B_MSK 0x0000ff00
-#define IWL_RX_INFO_ENERGY_ANT_C_MSK 0x00ff0000
-#define IWL_RX_INFO_ENERGY_ANT_A_POS 0
-#define IWL_RX_INFO_ENERGY_ANT_B_POS 8
-#define IWL_RX_INFO_ENERGY_ANT_C_POS 16
-
-#define IWL_RX_INFO_AGC_IDX 1
-#define IWL_RX_INFO_RSSI_AB_IDX 2
-#define IWL_OFDM_AGC_A_MSK 0x0000007f
-#define IWL_OFDM_AGC_A_POS 0
-#define IWL_OFDM_AGC_B_MSK 0x00003f80
-#define IWL_OFDM_AGC_B_POS 7
-#define IWL_OFDM_AGC_CODE_MSK 0x3fe00000
-#define IWL_OFDM_AGC_CODE_POS 20
-#define IWL_OFDM_RSSI_INBAND_A_MSK 0x00ff
-#define IWL_OFDM_RSSI_A_POS 0
-#define IWL_OFDM_RSSI_ALLBAND_A_MSK 0xff00
-#define IWL_OFDM_RSSI_ALLBAND_A_POS 8
-#define IWL_OFDM_RSSI_INBAND_B_MSK 0xff0000
-#define IWL_OFDM_RSSI_B_POS 16
-#define IWL_OFDM_RSSI_ALLBAND_B_MSK 0xff000000
-#define IWL_OFDM_RSSI_ALLBAND_B_POS 24
-
-/**
- * struct iwl_rx_phy_info - phy info
- * (REPLY_RX_PHY_CMD = 0xc0)
- * @non_cfg_phy_cnt: non configurable DSP phy data byte count
- * @cfg_phy_cnt: configurable DSP phy data byte count
- * @stat_id: configurable DSP phy data set ID
- * @reserved1:
- * @system_timestamp: GP2 at on air rise
- * @timestamp: TSF at on air rise
- * @beacon_time_stamp: beacon at on-air rise
- * @phy_flags: general phy flags: band, modulation, ...
- * @channel: channel number
- * @non_cfg_phy_buf: for various implementations of non_cfg_phy
- * @rate_n_flags: RATE_MCS_*
- * @byte_count: frame's byte-count
- * @frame_time: frame's time on the air, based on byte count and frame rate
- * calculation
- * @mac_active_msk: what MACs were active when the frame was received
- *
- * Before each Rx, the device sends this data. It contains PHY information
- * about the reception of the packet.
- */
-struct iwl_rx_phy_info {
- u8 non_cfg_phy_cnt;
- u8 cfg_phy_cnt;
- u8 stat_id;
- u8 reserved1;
- __le32 system_timestamp;
- __le64 timestamp;
- __le32 beacon_time_stamp;
- __le16 phy_flags;
- __le16 channel;
- __le32 non_cfg_phy[IWL_RX_INFO_PHY_CNT];
- __le32 rate_n_flags;
- __le32 byte_count;
- __le16 mac_active_msk;
- __le16 frame_time;
-} __packed;
-
-/*
- * TCP offload Rx assist info
- *
- * bits 0:3 - reserved
- * bits 4:7 - MIC CRC length
- * bits 8:12 - MAC header length
- * bit 13 - Padding indication
- * bit 14 - A-AMSDU indication
- * bit 15 - Offload enabled
- */
-enum iwl_csum_rx_assist_info {
- CSUM_RXA_RESERVED_MASK = 0x000f,
- CSUM_RXA_MICSIZE_MASK = 0x00f0,
- CSUM_RXA_HEADERLEN_MASK = 0x1f00,
- CSUM_RXA_PADD = BIT(13),
- CSUM_RXA_AMSDU = BIT(14),
- CSUM_RXA_ENA = BIT(15)
-};
-
-/**
- * struct iwl_rx_mpdu_res_start - phy info
- * @assist: see CSUM_RX_ASSIST_ above
- */
-struct iwl_rx_mpdu_res_start {
- __le16 byte_count;
- __le16 assist;
-} __packed; /* _RX_MPDU_RES_START_API_S_VER_2 */
-
-/**
- * enum iwl_rx_phy_flags - to parse %iwl_rx_phy_info phy_flags
- * @RX_RES_PHY_FLAGS_BAND_24: true if the packet was received on 2.4 band
- * @RX_RES_PHY_FLAGS_MOD_CCK:
- * @RX_RES_PHY_FLAGS_SHORT_PREAMBLE: true if packet's preamble was short
- * @RX_RES_PHY_FLAGS_NARROW_BAND:
- * @RX_RES_PHY_FLAGS_ANTENNA: antenna on which the packet was received
- * @RX_RES_PHY_FLAGS_AGG: set if the packet was part of an A-MPDU
- * @RX_RES_PHY_FLAGS_OFDM_HT: The frame was an HT frame
- * @RX_RES_PHY_FLAGS_OFDM_GF: The frame used GF preamble
- * @RX_RES_PHY_FLAGS_OFDM_VHT: The frame was a VHT frame
- */
-enum iwl_rx_phy_flags {
- RX_RES_PHY_FLAGS_BAND_24 = BIT(0),
- RX_RES_PHY_FLAGS_MOD_CCK = BIT(1),
- RX_RES_PHY_FLAGS_SHORT_PREAMBLE = BIT(2),
- RX_RES_PHY_FLAGS_NARROW_BAND = BIT(3),
- RX_RES_PHY_FLAGS_ANTENNA = (0x7 << 4),
- RX_RES_PHY_FLAGS_ANTENNA_POS = 4,
- RX_RES_PHY_FLAGS_AGG = BIT(7),
- RX_RES_PHY_FLAGS_OFDM_HT = BIT(8),
- RX_RES_PHY_FLAGS_OFDM_GF = BIT(9),
- RX_RES_PHY_FLAGS_OFDM_VHT = BIT(10),
-};
-
-/**
- * enum iwl_mvm_rx_status - written by fw for each Rx packet
- * @RX_MPDU_RES_STATUS_CRC_OK: CRC is fine
- * @RX_MPDU_RES_STATUS_OVERRUN_OK: there was no RXE overflow
- * @RX_MPDU_RES_STATUS_SRC_STA_FOUND:
- * @RX_MPDU_RES_STATUS_KEY_VALID:
- * @RX_MPDU_RES_STATUS_KEY_PARAM_OK:
- * @RX_MPDU_RES_STATUS_ICV_OK: ICV is fine, if not, the packet is destroyed
- * @RX_MPDU_RES_STATUS_MIC_OK: used for CCM alg only. TKIP MIC is checked
- * in the driver.
- * @RX_MPDU_RES_STATUS_TTAK_OK: TTAK is fine
- * @RX_MPDU_RES_STATUS_MNG_FRAME_REPLAY_ERR: valid for alg = CCM_CMAC or
- * alg = CCM only. Checks replay attack for 11w frames. Relevant only if
- * %RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME is set.
- * @RX_MPDU_RES_STATUS_SEC_NO_ENC: this frame is not encrypted
- * @RX_MPDU_RES_STATUS_SEC_WEP_ENC: this frame is encrypted using WEP
- * @RX_MPDU_RES_STATUS_SEC_CCM_ENC: this frame is encrypted using CCM
- * @RX_MPDU_RES_STATUS_SEC_TKIP_ENC: this frame is encrypted using TKIP
- * @RX_MPDU_RES_STATUS_SEC_CCM_CMAC_ENC: this frame is encrypted using CCM_CMAC
- * @RX_MPDU_RES_STATUS_SEC_ENC_ERR: this frame couldn't be decrypted
- * @RX_MPDU_RES_STATUS_SEC_ENC_MSK: bitmask of the encryption algorithm
- * @RX_MPDU_RES_STATUS_DEC_DONE: this frame has been successfully decrypted
- * @RX_MPDU_RES_STATUS_PROTECT_FRAME_BIT_CMP:
- * @RX_MPDU_RES_STATUS_EXT_IV_BIT_CMP:
- * @RX_MPDU_RES_STATUS_KEY_ID_CMP_BIT:
- * @RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME: this frame is an 11w management frame
- * @RX_MPDU_RES_STATUS_CSUM_DONE: checksum was done by the hw
- * @RX_MPDU_RES_STATUS_CSUM_OK: checksum found no errors
- * @RX_MPDU_RES_STATUS_HASH_INDEX_MSK:
- * @RX_MPDU_RES_STATUS_STA_ID_MSK:
- * @RX_MPDU_RES_STATUS_RRF_KILL:
- * @RX_MPDU_RES_STATUS_FILTERING_MSK:
- * @RX_MPDU_RES_STATUS2_FILTERING_MSK:
- */
-enum iwl_mvm_rx_status {
- RX_MPDU_RES_STATUS_CRC_OK = BIT(0),
- RX_MPDU_RES_STATUS_OVERRUN_OK = BIT(1),
- RX_MPDU_RES_STATUS_SRC_STA_FOUND = BIT(2),
- RX_MPDU_RES_STATUS_KEY_VALID = BIT(3),
- RX_MPDU_RES_STATUS_KEY_PARAM_OK = BIT(4),
- RX_MPDU_RES_STATUS_ICV_OK = BIT(5),
- RX_MPDU_RES_STATUS_MIC_OK = BIT(6),
- RX_MPDU_RES_STATUS_TTAK_OK = BIT(7),
- RX_MPDU_RES_STATUS_MNG_FRAME_REPLAY_ERR = BIT(7),
- RX_MPDU_RES_STATUS_SEC_NO_ENC = (0 << 8),
- RX_MPDU_RES_STATUS_SEC_WEP_ENC = (1 << 8),
- RX_MPDU_RES_STATUS_SEC_CCM_ENC = (2 << 8),
- RX_MPDU_RES_STATUS_SEC_TKIP_ENC = (3 << 8),
- RX_MPDU_RES_STATUS_SEC_EXT_ENC = (4 << 8),
- RX_MPDU_RES_STATUS_SEC_CCM_CMAC_ENC = (6 << 8),
- RX_MPDU_RES_STATUS_SEC_ENC_ERR = (7 << 8),
- RX_MPDU_RES_STATUS_SEC_ENC_MSK = (7 << 8),
- RX_MPDU_RES_STATUS_DEC_DONE = BIT(11),
- RX_MPDU_RES_STATUS_PROTECT_FRAME_BIT_CMP = BIT(12),
- RX_MPDU_RES_STATUS_EXT_IV_BIT_CMP = BIT(13),
- RX_MPDU_RES_STATUS_KEY_ID_CMP_BIT = BIT(14),
- RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME = BIT(15),
- RX_MPDU_RES_STATUS_CSUM_DONE = BIT(16),
- RX_MPDU_RES_STATUS_CSUM_OK = BIT(17),
- RX_MPDU_RES_STATUS_HASH_INDEX_MSK = (0x3F0000),
- RX_MPDU_RES_STATUS_STA_ID_MSK = (0x1f000000),
- RX_MPDU_RES_STATUS_RRF_KILL = BIT(29),
- RX_MPDU_RES_STATUS_FILTERING_MSK = (0xc00000),
- RX_MPDU_RES_STATUS2_FILTERING_MSK = (0xc0000000),
-};
-
/**
* struct iwl_radio_version_notif - information on the radio version
* ( RADIO_VERSION_NOTIFICATION = 0x68 )
@@ -1696,6 +1524,69 @@ struct iwl_dts_measurement_cmd {
} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_CMD_S */
/**
+* enum iwl_dts_control_measurement_mode - DTS measurement type
+* @DTS_AUTOMATIC: Automatic mode (full SW control). Provide temperature read
+* back (latest value. Not waiting for new value). Use automatic
+* SW DTS configuration.
+* @DTS_REQUEST_READ: Request DTS read. Configure DTS with manual settings,
+* trigger DTS reading and provide read back temperature read
+* when available.
+* @DTS_OVER_WRITE: over-write the DTS temperatures in the SW until next read
+* @DTS_DIRECT_WITHOUT_MEASURE: DTS returns its latest temperature result,
+* without measurement trigger.
+*/
+enum iwl_dts_control_measurement_mode {
+ DTS_AUTOMATIC = 0,
+ DTS_REQUEST_READ = 1,
+ DTS_OVER_WRITE = 2,
+ DTS_DIRECT_WITHOUT_MEASURE = 3,
+};
+
+/**
+* enum iwl_dts_used - DTS to use or used for measurement in the DTS request
+* @DTS_USE_TOP: Top
+* @DTS_USE_CHAIN_A: chain A
+* @DTS_USE_CHAIN_B: chain B
+* @DTS_USE_CHAIN_C: chain C
+* @XTAL_TEMPERATURE - read temperature from xtal
+*/
+enum iwl_dts_used {
+ DTS_USE_TOP = 0,
+ DTS_USE_CHAIN_A = 1,
+ DTS_USE_CHAIN_B = 2,
+ DTS_USE_CHAIN_C = 3,
+ XTAL_TEMPERATURE = 4,
+};
+
+/**
+* enum iwl_dts_bit_mode - bit-mode to use in DTS request read mode
+* @DTS_BIT6_MODE: bit 6 mode
+* @DTS_BIT8_MODE: bit 8 mode
+*/
+enum iwl_dts_bit_mode {
+ DTS_BIT6_MODE = 0,
+ DTS_BIT8_MODE = 1,
+};
+
+/**
+ * iwl_ext_dts_measurement_cmd - request extended DTS temperature measurements
+ * @control_mode: see &enum iwl_dts_control_measurement_mode
+ * @temperature: used when over write DTS mode is selected
+ * @sensor: set temperature sensor to use. See &enum iwl_dts_used
+ * @avg_factor: average factor to DTS in request DTS read mode
+ * @bit_mode: value defines the DTS bit mode to use. See &enum iwl_dts_bit_mode
+ * @step_duration: step duration for the DTS
+ */
+struct iwl_ext_dts_measurement_cmd {
+ __le32 control_mode;
+ __le32 temperature;
+ __le32 sensor;
+ __le32 avg_factor;
+ __le32 bit_mode;
+ __le32 step_duration;
+} __packed; /* XVT_FW_DTS_CONTROL_MEASUREMENT_REQUEST_API_S */
+
+/**
* iwl_dts_measurement_notif - notification received with the measurements
*
* @temp: the measured temperature