diff options
| author | Zhu Yi <yi.zhu@intel.com> | 2006-01-24 16:36:59 +0800 |
|---|---|---|
| committer | John W. Linville <linville@tuxdriver.com> | 2006-01-30 20:35:33 -0500 |
| commit | 810dabd466fe70869b66ab64dd326b6153cef645 (patch) | |
| tree | ca919a3a3b819b6bb46cc9d072b58f8b698b1070 /drivers/net/wireless/ipw2200.h | |
| parent | 3e234b4e5768b4f783fc45f20be8c6515b875f17 (diff) | |
| download | linux-810dabd466fe70869b66ab64dd326b6153cef645.tar.bz2 | |
[PATCH] ipw2200: Bluetooth coexistence support
I've added a new module param "bt_coexist" which defaults to OFF.
This does not seem to fix the firmware restarts, but it does do "the
right thing" and disables something that we were enabling by default:
signaling the Bluetooth h/w which channel we're on (whether or not the
BT h/w was out there).
Signed-off-by: Ben M Cahill <ben.m.cahill@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/ipw2200.h')
| -rw-r--r-- | drivers/net/wireless/ipw2200.h | 35 |
1 files changed, 21 insertions, 14 deletions
diff --git a/drivers/net/wireless/ipw2200.h b/drivers/net/wireless/ipw2200.h index 5f32834745b5..d6d7d9db0462 100644 --- a/drivers/net/wireless/ipw2200.h +++ b/drivers/net/wireless/ipw2200.h @@ -1566,13 +1566,18 @@ do { if (ipw_debug_level & (level)) \ #define EEPROM_BSS_CHANNELS_BG (GET_EEPROM_ADDR(0x2c,LSB)) /* 2 bytes */ #define EEPROM_HW_VERSION (GET_EEPROM_ADDR(0x72,LSB)) /* 2 bytes */ -/* NIC type as found in the one byte EEPROM_NIC_TYPE offset*/ +/* NIC type as found in the one byte EEPROM_NIC_TYPE offset */ #define EEPROM_NIC_TYPE_0 0 #define EEPROM_NIC_TYPE_1 1 #define EEPROM_NIC_TYPE_2 2 #define EEPROM_NIC_TYPE_3 3 #define EEPROM_NIC_TYPE_4 4 +/* Bluetooth Coexistence capabilities as found in EEPROM_SKU_CAPABILITY */ +#define EEPROM_SKU_CAP_BT_CHANNEL_SIG 0x01 /* we can tell BT our channel # */ +#define EEPROM_SKU_CAP_BT_PRIORITY 0x02 /* BT can take priority over us */ +#define EEPROM_SKU_CAP_BT_OOB 0x04 /* we can signal BT out-of-band */ + #define FW_MEM_REG_LOWER_BOUND 0x00300000 #define FW_MEM_REG_EEPROM_ACCESS (FW_MEM_REG_LOWER_BOUND + 0x40) #define IPW_EVENT_REG (FW_MEM_REG_LOWER_BOUND + 0x04) @@ -1869,21 +1874,23 @@ struct ipw_cmd_log { struct host_cmd cmd; }; -#define CFG_BT_COEXISTENCE_MIN 0x00 -#define CFG_BT_COEXISTENCE_DEFER 0x02 -#define CFG_BT_COEXISTENCE_KILL 0x04 -#define CFG_BT_COEXISTENCE_WME_OVER_BT 0x08 -#define CFG_BT_COEXISTENCE_OOB 0x10 -#define CFG_BT_COEXISTENCE_MAX 0xFF -#define CFG_BT_COEXISTENCE_DEF 0x80 /* read Bt from EEPROM */ - -#define CFG_CTS_TO_ITSELF_ENABLED_MIN 0x0 -#define CFG_CTS_TO_ITSELF_ENABLED_MAX 0x1 +/* SysConfig command parameters ... */ +/* bt_coexistence param */ +#define CFG_BT_COEXISTENCE_SIGNAL_CHNL 0x01 /* tell BT our chnl # */ +#define CFG_BT_COEXISTENCE_DEFER 0x02 /* defer our Tx if BT traffic */ +#define CFG_BT_COEXISTENCE_KILL 0x04 /* kill our Tx if BT traffic */ +#define CFG_BT_COEXISTENCE_WME_OVER_BT 0x08 /* multimedia extensions */ +#define CFG_BT_COEXISTENCE_OOB 0x10 /* signal BT via out-of-band */ + +/* clear-to-send to self param */ +#define CFG_CTS_TO_ITSELF_ENABLED_MIN 0x00 +#define CFG_CTS_TO_ITSELF_ENABLED_MAX 0x01 #define CFG_CTS_TO_ITSELF_ENABLED_DEF CFG_CTS_TO_ITSELF_ENABLED_MIN -#define CFG_SYS_ANTENNA_BOTH 0x000 -#define CFG_SYS_ANTENNA_A 0x001 -#define CFG_SYS_ANTENNA_B 0x003 +/* Antenna diversity param (h/w can select best antenna, based on signal) */ +#define CFG_SYS_ANTENNA_BOTH 0x00 /* NIC selects best antenna */ +#define CFG_SYS_ANTENNA_A 0x01 /* force antenna A */ +#define CFG_SYS_ANTENNA_B 0x03 /* force antenna B */ /* * The definitions below were lifted off the ipw2100 driver, which only |