Merge tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v5.19

First set of patches for v5.19 and this is a big one. We have two new
drivers, a change in mac80211 STA API affecting most drivers and
ath11k getting support for WCN6750. And as usual lots of fixes and
cleanups all over.

Major changes:

new drivers
 - wfx: silicon labs devices
 - plfxlc: pureLiFi X, XL, XC devices

mac80211
 - host based BSS color collision detection
 - prepare sta handling for IEEE 802.11be Multi-Link Operation (MLO) support

rtw88
 - support TP-Link T2E devices

rtw89
 - support firmware crash simulation
 - preparation for 8852ce hardware support

ath11k
 - Wake-on-WLAN support for QCA6390 and WCN6855
 - device recovery (firmware restart) support for QCA6390 and WCN6855
 - support setting Specific Absorption Rate (SAR) for WCN6855
 - read country code from SMBIOS for WCN6855/QCA6390
 - support for WCN6750

wcn36xx
 - support for transmit rate reporting to user space

* tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (228 commits)
  rtw89: 8852c: rfk: add DPK
  rtw89: 8852c: rfk: add IQK
  rtw89: 8852c: rfk: add RX DCK
  rtw89: 8852c: rfk: add RCK
  rtw89: 8852c: rfk: add TSSI
  rtw89: 8852c: rfk: add LCK
  rtw89: 8852c: rfk: add DACK
  rtw89: 8852c: rfk: add RFK tables
  plfxlc: fix le16_to_cpu warning for beacon_interval
  rtw88: remove a copy of the NAPI_POLL_WEIGHT define
  carl9170: tx: fix an incorrect use of list iterator
  wil6210: use NAPI_POLL_WEIGHT for napi budget
  ath10k: remove a copy of the NAPI_POLL_WEIGHT define
  ath11k: Add support for WCN6750 device
  ath11k: Datapath changes to support WCN6750
  ath11k: HAL changes to support WCN6750
  ath11k: Add QMI changes for WCN6750
  ath11k: Fetch device information via QMI for WCN6750
  ath11k: Add register access logic for WCN6750
  ath11k: Add HW params for WCN6750
  ...
====================

Link: https://lore.kernel.org/r/20220503153622.C1671C385A4@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

5 files changed, 26 insertions, 20 deletions

diff --git a/drivers/net/wireless/broadcom/b43/phy_n.c b/drivers/net/wireless/broadcom/b43/phy_n.c
index cf3ccf4ddfe7..aa5c99465674 100644
--- a/drivers/net/wireless/broadcom/b43/phy_n.c
+++ b/drivers/net/wireless/broadcom/b43/phy_n.c
@@ -582,7 +582,7 @@ static void b43_nphy_adjust_lna_gain_table(struct b43_wldev *dev)
 	u16 data[4];
 	s16 gain[2];
 	u16 minmax[2];
-	static const u16 lna_gain[4] = { -2, 10, 19, 25 };
+	static const s16 lna_gain[4] = { -2, 10, 19, 25 };
 
 	if (nphy->hang_avoid)
 		b43_nphy_stay_in_carrier_search(dev, 1);
diff --git a/drivers/net/wireless/broadcom/b43legacy/phy.c b/drivers/net/wireless/broadcom/b43legacy/phy.c
index 05404fbd1e70..c1395e622759 100644
--- a/drivers/net/wireless/broadcom/b43legacy/phy.c
+++ b/drivers/net/wireless/broadcom/b43legacy/phy.c
@@ -1123,7 +1123,7 @@ void b43legacy_phy_lo_b_measure(struct b43legacy_wldev *dev)
 	struct b43legacy_phy *phy = &dev->phy;
 	u16 regstack[12] = { 0 };
 	u16 mls;
-	u16 fval;
+	s16 fval;
 	int i;
 	int j;
 
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index ac02244a6fdf..9c598ea97499 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -1119,9 +1119,21 @@ void brcmf_sdio_wowl_config(struct device *dev, bool enabled)
 {
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+	mmc_pm_flag_t pm_caps = sdio_get_host_pm_caps(sdiodev->func1);
 
-	brcmf_dbg(SDIO, "Configuring WOWL, enabled=%d\n", enabled);
-	sdiodev->wowl_enabled = enabled;
+	/* Power must be preserved to be able to support WOWL. */
+	if (!(pm_caps & MMC_PM_KEEP_POWER))
+		goto notsup;
+
+	if (sdiodev->settings->bus.sdio.oob_irq_supported ||
+	    pm_caps & MMC_PM_WAKE_SDIO_IRQ) {
+		sdiodev->wowl_enabled = enabled;
+		brcmf_dbg(SDIO, "Configuring WOWL, enabled=%d\n", enabled);
+		return;
+	}
+
+notsup:
+	brcmf_dbg(SDIO, "WOWL not supported\n");
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -1130,7 +1142,7 @@ static int brcmf_ops_sdio_suspend(struct device *dev)
 	struct sdio_func *func;
 	struct brcmf_bus *bus_if;
 	struct brcmf_sdio_dev *sdiodev;
-	mmc_pm_flag_t pm_caps, sdio_flags;
+	mmc_pm_flag_t sdio_flags;
 	int ret = 0;
 
 	func = container_of(dev, struct sdio_func, dev);
@@ -1142,20 +1154,15 @@ static int brcmf_ops_sdio_suspend(struct device *dev)
 	bus_if = dev_get_drvdata(dev);
 	sdiodev = bus_if->bus_priv.sdio;
 
-	pm_caps = sdio_get_host_pm_caps(func);
-
-	if (pm_caps & MMC_PM_KEEP_POWER) {
-		/* preserve card power during suspend */
+	if (sdiodev->wowl_enabled) {
 		brcmf_sdiod_freezer_on(sdiodev);
 		brcmf_sdio_wd_timer(sdiodev->bus, 0);
 
 		sdio_flags = MMC_PM_KEEP_POWER;
-		if (sdiodev->wowl_enabled) {
-			if (sdiodev->settings->bus.sdio.oob_irq_supported)
-				enable_irq_wake(sdiodev->settings->bus.sdio.oob_irq_nr);
-			else
-				sdio_flags |= MMC_PM_WAKE_SDIO_IRQ;
-		}
+		if (sdiodev->settings->bus.sdio.oob_irq_supported)
+			enable_irq_wake(sdiodev->settings->bus.sdio.oob_irq_nr);
+		else
+			sdio_flags |= MMC_PM_WAKE_SDIO_IRQ;
 
 		if (sdio_set_host_pm_flags(sdiodev->func1, sdio_flags))
 			brcmf_err("Failed to set pm_flags %x\n", sdio_flags);
@@ -1176,21 +1183,19 @@ static int brcmf_ops_sdio_resume(struct device *dev)
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 	struct sdio_func *func = container_of(dev, struct sdio_func, dev);
-	mmc_pm_flag_t pm_caps = sdio_get_host_pm_caps(func);
 	int ret = 0;
 
 	brcmf_dbg(SDIO, "Enter: F%d\n", func->num);
 	if (func->num != 2)
 		return 0;
 
-	if (!(pm_caps & MMC_PM_KEEP_POWER)) {
+	if (!sdiodev->wowl_enabled) {
 		/* bus was powered off and device removed, probe again */
 		ret = brcmf_sdiod_probe(sdiodev);
 		if (ret)
 			brcmf_err("Failed to probe device on resume\n");
 	} else {
-		if (sdiodev->wowl_enabled &&
-		    sdiodev->settings->bus.sdio.oob_irq_supported)
+		if (sdiodev->settings->bus.sdio.oob_irq_supported)
 			disable_irq_wake(sdiodev->settings->bus.sdio.oob_irq_nr);
 
 		brcmf_sdiod_freezer_off(sdiodev);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index f0ad1e23f3c8..360b103fe898 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -7481,6 +7481,7 @@ static bool brmcf_use_iso3166_ccode_fallback(struct brcmf_pub *drvr)
 {
 	switch (drvr->bus_if->chip) {
 	case BRCM_CC_4345_CHIP_ID:
+	case BRCM_CC_43602_CHIP_ID:
 		return true;
 	default:
 		return false;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
index eadac0f5590f..8c741b98d8e5 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
@@ -868,7 +868,7 @@ brcms_ops_ampdu_action(struct ieee80211_hw *hw,
 		spin_lock_bh(&wl->lock);
 		brcms_c_ampdu_tx_operational(wl->wlc, tid, buf_size,
 			(1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
-			 sta->ht_cap.ampdu_factor)) - 1);
+			 sta->deflink.ht_cap.ampdu_factor)) - 1);
 		spin_unlock_bh(&wl->lock);
 		/* Power save wakeup */
 		break;