diff options
author | Christian Riesch <christian.riesch@omicron.at> | 2012-07-13 05:26:31 +0000 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2012-07-16 23:26:23 -0700 |
commit | 16626b0cc3d5afe250850f96759b241f8a403b52 (patch) | |
tree | 97cb3cc00d2cebc7d59d6a56d253538d08c8fb02 /drivers/net/usb | |
parent | 607740bc1605395c96b09416cdcc5e77c8976eed (diff) | |
download | linux-16626b0cc3d5afe250850f96759b241f8a403b52.tar.bz2 |
asix: Add a new driver for the AX88172A
The Asix AX88172A is a USB 2.0 Ethernet interface that supports both an
internal PHY as well as an external PHY (connected via MII).
This patch adds a driver for the AX88172A and provides support for
both modes and the phylib.
Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/usb')
-rw-r--r-- | drivers/net/usb/Makefile | 2 | ||||
-rw-r--r-- | drivers/net/usb/asix.h | 5 | ||||
-rw-r--r-- | drivers/net/usb/asix_common.c | 12 | ||||
-rw-r--r-- | drivers/net/usb/asix_devices.c | 6 | ||||
-rw-r--r-- | drivers/net/usb/ax88172a.c | 415 |
5 files changed, 437 insertions, 3 deletions
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index a9490d9a4e98..bf063008c1af 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -8,7 +8,7 @@ obj-$(CONFIG_USB_PEGASUS) += pegasus.o obj-$(CONFIG_USB_RTL8150) += rtl8150.o obj-$(CONFIG_USB_HSO) += hso.o obj-$(CONFIG_USB_NET_AX8817X) += asix.o -asix-y := asix_devices.o asix_common.o +asix-y := asix_devices.o asix_common.o ax88172a.o obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o obj-$(CONFIG_USB_NET_DM9601) += dm9601.o diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h index 790af241f197..77d9e4c1e235 100644 --- a/drivers/net/usb/asix.h +++ b/drivers/net/usb/asix.h @@ -74,6 +74,10 @@ #define AX_CMD_SW_PHY_STATUS 0x21 #define AX_CMD_SW_PHY_SELECT 0x22 +#define AX_PHY_SELECT_MASK (BIT(3) | BIT(2)) +#define AX_PHY_SELECT_INTERNAL 0 +#define AX_PHY_SELECT_EXTERNAL BIT(2) + #define AX_MONITOR_MODE 0x01 #define AX_MONITOR_LINK 0x02 #define AX_MONITOR_MAGIC 0x04 @@ -181,6 +185,7 @@ struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, int asix_set_sw_mii(struct usbnet *dev); int asix_set_hw_mii(struct usbnet *dev); +int asix_read_phy_addr(struct usbnet *dev, int internal); int asix_get_phy_addr(struct usbnet *dev); int asix_sw_reset(struct usbnet *dev, u8 flags); diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c index 3c1429a25ca4..336f75567091 100644 --- a/drivers/net/usb/asix_common.c +++ b/drivers/net/usb/asix_common.c @@ -258,8 +258,9 @@ int asix_set_hw_mii(struct usbnet *dev) return ret; } -int asix_get_phy_addr(struct usbnet *dev) +int asix_read_phy_addr(struct usbnet *dev, int internal) { + int offset = (internal ? 1 : 0); u8 buf[2]; int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf); @@ -271,12 +272,19 @@ int asix_get_phy_addr(struct usbnet *dev) } netdev_dbg(dev->net, "asix_get_phy_addr() returning 0x%04x\n", *((__le16 *)buf)); - ret = buf[1]; + ret = buf[offset]; out: return ret; } +int asix_get_phy_addr(struct usbnet *dev) +{ + /* return the address of the internal phy */ + return asix_read_phy_addr(dev, 1); +} + + int asix_sw_reset(struct usbnet *dev, u8 flags) { int ret; diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index 8c513f7921f4..ed9403b0c437 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -872,6 +872,8 @@ static const struct driver_info ax88178_info = { .tx_fixup = asix_tx_fixup, }; +extern const struct driver_info ax88172a_info; + static const struct usb_device_id products [] = { { // Linksys USB200M @@ -997,6 +999,10 @@ static const struct usb_device_id products [] = { // Asus USB Ethernet Adapter USB_DEVICE (0x0b95, 0x7e2b), .driver_info = (unsigned long) &ax88772_info, +}, { + /* ASIX 88172a demo board */ + USB_DEVICE(0x0b95, 0x172a), + .driver_info = (unsigned long) &ax88172a_info, }, { }, // END }; diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c new file mode 100644 index 000000000000..534a144bd9e7 --- /dev/null +++ b/drivers/net/usb/ax88172a.c @@ -0,0 +1,415 @@ +/* + * ASIX AX88172A based USB 2.0 Ethernet Devices + * Copyright (C) 2012 OMICRON electronics GmbH + * + * Supports external PHYs via phylib. Based on the driver for the + * AX88772. Original copyrights follow: + * + * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com> + * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net> + * Copyright (C) 2006 James Painter <jamie.painter@iname.com> + * Copyright (c) 2002-2003 TiVo Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "asix.h" +#include <linux/phy.h> + +struct ax88172a_private { + struct mii_bus *mdio; + struct phy_device *phydev; + char phy_name[20]; + u16 phy_addr; + u16 oldmode; + int use_embdphy; +}; + +/* MDIO read and write wrappers for phylib */ +static int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum) +{ + return asix_mdio_read(((struct usbnet *)bus->priv)->net, phy_id, + regnum); +} + +static int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum, + u16 val) +{ + asix_mdio_write(((struct usbnet *)bus->priv)->net, phy_id, regnum, val); + return 0; +} + +static int ax88172a_ioctl(struct net_device *net, struct ifreq *rq, int cmd) +{ + if (!netif_running(net)) + return -EINVAL; + + if (!net->phydev) + return -ENODEV; + + return phy_mii_ioctl(net->phydev, rq, cmd); +} + +/* set MAC link settings according to information from phylib */ +static void ax88172a_adjust_link(struct net_device *netdev) +{ + struct phy_device *phydev = netdev->phydev; + struct usbnet *dev = netdev_priv(netdev); + struct ax88172a_private *priv = dev->driver_priv; + u16 mode = 0; + + if (phydev->link) { + mode = AX88772_MEDIUM_DEFAULT; + + if (phydev->duplex == DUPLEX_HALF) + mode &= ~AX_MEDIUM_FD; + + if (phydev->speed != SPEED_100) + mode &= ~AX_MEDIUM_PS; + } + + if (mode != priv->oldmode) { + asix_write_medium_mode(dev, mode); + priv->oldmode = mode; + netdev_dbg(netdev, "speed %u duplex %d, setting mode to 0x%04x\n", + phydev->speed, phydev->duplex, mode); + phy_print_status(phydev); + } +} + +static void ax88172a_status(struct usbnet *dev, struct urb *urb) +{ + /* link changes are detected by polling the phy */ +} + +/* use phylib infrastructure */ +static int ax88172a_init_mdio(struct usbnet *dev) +{ + struct ax88172a_private *priv = dev->driver_priv; + int ret, i; + + priv->mdio = mdiobus_alloc(); + if (!priv->mdio) { + netdev_err(dev->net, "Could not allocate MDIO bus\n"); + return -ENOMEM; + } + + priv->mdio->priv = (void *)dev; + priv->mdio->read = &asix_mdio_bus_read; + priv->mdio->write = &asix_mdio_bus_write; + priv->mdio->name = "Asix MDIO Bus"; + /* mii bus name is usb-<usb bus number>-<usb device number> */ + snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d", + dev->udev->bus->busnum, dev->udev->devnum); + + priv->mdio->irq = kzalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); + if (!priv->mdio->irq) { + netdev_err(dev->net, "Could not allocate mdio->irq\n"); + ret = -ENOMEM; + goto mfree; + } + for (i = 0; i < PHY_MAX_ADDR; i++) + priv->mdio->irq[i] = PHY_POLL; + + ret = mdiobus_register(priv->mdio); + if (ret) { + netdev_err(dev->net, "Could not register MDIO bus\n"); + goto ifree; + } + + netdev_info(dev->net, "registered mdio bus %s\n", priv->mdio->id); + return 0; + +ifree: + kfree(priv->mdio->irq); +mfree: + mdiobus_free(priv->mdio); + return ret; +} + +static void ax88172a_remove_mdio(struct usbnet *dev) +{ + struct ax88172a_private *priv = dev->driver_priv; + + netdev_info(dev->net, "deregistering mdio bus %s\n", priv->mdio->id); + mdiobus_unregister(priv->mdio); + kfree(priv->mdio->irq); + mdiobus_free(priv->mdio); +} + +static const struct net_device_ops ax88172a_netdev_ops = { + .ndo_open = usbnet_open, + .ndo_stop = usbnet_stop, + .ndo_start_xmit = usbnet_start_xmit, + .ndo_tx_timeout = usbnet_tx_timeout, + .ndo_change_mtu = usbnet_change_mtu, + .ndo_set_mac_address = asix_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_do_ioctl = ax88172a_ioctl, + .ndo_set_rx_mode = asix_set_multicast, +}; + +int ax88172a_get_settings(struct net_device *net, struct ethtool_cmd *cmd) +{ + if (!net->phydev) + return -ENODEV; + + return phy_ethtool_gset(net->phydev, cmd); +} + +int ax88172a_set_settings(struct net_device *net, struct ethtool_cmd *cmd) +{ + if (!net->phydev) + return -ENODEV; + + return phy_ethtool_sset(net->phydev, cmd); +} + +int ax88172a_nway_reset(struct net_device *net) +{ + if (!net->phydev) + return -ENODEV; + + return phy_start_aneg(net->phydev); +} + +static const struct ethtool_ops ax88172a_ethtool_ops = { + .get_drvinfo = asix_get_drvinfo, + .get_link = usbnet_get_link, + .get_msglevel = usbnet_get_msglevel, + .set_msglevel = usbnet_set_msglevel, + .get_wol = asix_get_wol, + .set_wol = asix_set_wol, + .get_eeprom_len = asix_get_eeprom_len, + .get_eeprom = asix_get_eeprom, + .get_settings = ax88172a_get_settings, + .set_settings = ax88172a_set_settings, + .nway_reset = ax88172a_nway_reset, +}; + +static int ax88172a_reset_phy(struct usbnet *dev, int embd_phy) +{ + int ret; + + ret = asix_sw_reset(dev, AX_SWRESET_IPPD); + if (ret < 0) + goto err; + + msleep(150); + ret = asix_sw_reset(dev, AX_SWRESET_CLEAR); + if (ret < 0) + goto err; + + msleep(150); + + ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD); + if (ret < 0) + goto err; + + return 0; + +err: + return ret; +} + + +static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int ret; + struct asix_data *data = (struct asix_data *)&dev->data; + u8 buf[ETH_ALEN]; + struct ax88172a_private *priv; + + data->eeprom_len = AX88772_EEPROM_LEN; + + usbnet_get_endpoints(dev, intf); + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + netdev_err(dev->net, "Could not allocate memory for private data\n"); + return -ENOMEM; + } + dev->driver_priv = priv; + + /* Get the MAC address */ + ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); + if (ret < 0) { + netdev_err(dev->net, "Failed to read MAC address: %d\n", ret); + goto free; + } + memcpy(dev->net->dev_addr, buf, ETH_ALEN); + + dev->net->netdev_ops = &ax88172a_netdev_ops; + dev->net->ethtool_ops = &ax88172a_ethtool_ops; + + /* are we using the internal or the external phy? */ + ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf); + if (ret < 0) { + netdev_err(dev->net, "Failed to read software interface selection register: %d\n", + ret); + goto free; + } + + netdev_dbg(dev->net, "AX_CMD_SW_PHY_STATUS = 0x%02x\n", buf[0]); + switch (buf[0] & AX_PHY_SELECT_MASK) { + case AX_PHY_SELECT_INTERNAL: + netdev_dbg(dev->net, "use internal phy\n"); + priv->use_embdphy = 1; + break; + case AX_PHY_SELECT_EXTERNAL: + netdev_dbg(dev->net, "use external phy\n"); + priv->use_embdphy = 0; + break; + default: + netdev_err(dev->net, "Interface mode not supported by driver\n"); + goto free; + } + + priv->phy_addr = asix_read_phy_addr(dev, priv->use_embdphy); + ax88172a_reset_phy(dev, priv->use_embdphy); + + /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ + if (dev->driver_info->flags & FLAG_FRAMING_AX) { + /* hard_mtu is still the default - the device does not support + jumbo eth frames */ + dev->rx_urb_size = 2048; + } + + /* init MDIO bus */ + ret = ax88172a_init_mdio(dev); + if (ret) + goto free; + + return 0; + +free: + kfree(priv); + return ret; +} + +static int ax88172a_stop(struct usbnet *dev) +{ + struct ax88172a_private *priv = dev->driver_priv; + + netdev_dbg(dev->net, "Stopping interface\n"); + + if (priv->phydev) { + netdev_info(dev->net, "Disconnecting from phy %s\n", + priv->phy_name); + phy_stop(priv->phydev); + phy_disconnect(priv->phydev); + } + + return 0; +} + +static void ax88172a_unbind(struct usbnet *dev, struct usb_interface *intf) +{ + struct ax88172a_private *priv = dev->driver_priv; + + ax88172a_remove_mdio(dev); + kfree(priv); +} + +static int ax88172a_reset(struct usbnet *dev) +{ + struct asix_data *data = (struct asix_data *)&dev->data; + struct ax88172a_private *priv = dev->driver_priv; + int ret; + u16 rx_ctl; + + ax88172a_reset_phy(dev, priv->use_embdphy); + + msleep(150); + rx_ctl = asix_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl); + ret = asix_write_rx_ctl(dev, 0x0000); + if (ret < 0) + goto out; + + rx_ctl = asix_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl); + + msleep(150); + + ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0, + AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT, + AX88772_IPG2_DEFAULT, 0, NULL); + if (ret < 0) { + netdev_err(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret); + goto out; + } + + /* Rewrite MAC address */ + memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN); + ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, + data->mac_addr); + if (ret < 0) + goto out; + + /* Set RX_CTL to default values with 2k buffer, and enable cactus */ + ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL); + if (ret < 0) + goto out; + + rx_ctl = asix_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n", + rx_ctl); + + rx_ctl = asix_read_medium_status(dev); + netdev_dbg(dev->net, "Medium Status is 0x%04x after all initializations\n", + rx_ctl); + + /* Connect to PHY */ + snprintf(priv->phy_name, 20, PHY_ID_FMT, + priv->mdio->id, priv->phy_addr); + + priv->phydev = phy_connect(dev->net, priv->phy_name, + &ax88172a_adjust_link, + 0, PHY_INTERFACE_MODE_MII); + if (IS_ERR(priv->phydev)) { + netdev_err(dev->net, "Could not connect to PHY device %s\n", + priv->phy_name); + ret = PTR_ERR(priv->phydev); + goto out; + } + + netdev_info(dev->net, "Connected to phy %s\n", priv->phy_name); + + /* During power-up, the AX88172A set the power down (BMCR_PDOWN) + * bit of the PHY. Bring the PHY up again. + */ + genphy_resume(priv->phydev); + phy_start(priv->phydev); + + return 0; + +out: + return ret; + +} + +const struct driver_info ax88172a_info = { + .description = "ASIX AX88172A USB 2.0 Ethernet", + .bind = ax88172a_bind, + .reset = ax88172a_reset, + .stop = ax88172a_stop, + .unbind = ax88172a_unbind, + .status = ax88172a_status, + .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | + FLAG_MULTI_PACKET, + .rx_fixup = asix_rx_fixup, + .tx_fixup = asix_tx_fixup, +}; |