summaryrefslogtreecommitdiffstats
path: root/drivers/net/smc9194.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/smc9194.h
downloadlinux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/smc9194.h')
-rw-r--r--drivers/net/smc9194.h241
1 files changed, 241 insertions, 0 deletions
diff --git a/drivers/net/smc9194.h b/drivers/net/smc9194.h
new file mode 100644
index 000000000000..393ab909bd86
--- /dev/null
+++ b/drivers/net/smc9194.h
@@ -0,0 +1,241 @@
+/*------------------------------------------------------------------------
+ . smc9194.h
+ . Copyright (C) 1996 by Erik Stahlman
+ .
+ . This software may be used and distributed according to the terms
+ . of the GNU General Public License, incorporated herein by reference.
+ .
+ . This file contains register information and access macros for
+ . the SMC91xxx chipset.
+ .
+ . Information contained in this file was obtained from the SMC91C94
+ . manual from SMC. To get a copy, if you really want one, you can find
+ . information under www.smc.com in the components division.
+ . ( this thanks to advice from Donald Becker ).
+ .
+ . Authors
+ . Erik Stahlman ( erik@vt.edu )
+ .
+ . History
+ . 01/06/96 Erik Stahlman moved definitions here from main .c file
+ . 01/19/96 Erik Stahlman polished this up some, and added better
+ . error handling
+ .
+ ---------------------------------------------------------------------------*/
+#ifndef _SMC9194_H_
+#define _SMC9194_H_
+
+/* I want some simple types */
+
+typedef unsigned char byte;
+typedef unsigned short word;
+typedef unsigned long int dword;
+
+
+/* Because of bank switching, the SMC91xxx uses only 16 I/O ports */
+
+#define SMC_IO_EXTENT 16
+
+
+/*---------------------------------------------------------------
+ .
+ . A description of the SMC registers is probably in order here,
+ . although for details, the SMC datasheet is invaluable.
+ .
+ . Basically, the chip has 4 banks of registers ( 0 to 3 ), which
+ . are accessed by writing a number into the BANK_SELECT register
+ . ( I also use a SMC_SELECT_BANK macro for this ).
+ .
+ . The banks are configured so that for most purposes, bank 2 is all
+ . that is needed for simple run time tasks.
+ -----------------------------------------------------------------------*/
+
+/*
+ . Bank Select Register:
+ .
+ . yyyy yyyy 0000 00xx
+ . xx = bank number
+ . yyyy yyyy = 0x33, for identification purposes.
+*/
+#define BANK_SELECT 14
+
+/* BANK 0 */
+
+#define TCR 0 /* transmit control register */
+#define TCR_ENABLE 0x0001 /* if this is 1, we can transmit */
+#define TCR_FDUPLX 0x0800 /* receive packets sent out */
+#define TCR_STP_SQET 0x1000 /* stop transmitting if Signal quality error */
+#define TCR_MON_CNS 0x0400 /* monitors the carrier status */
+#define TCR_PAD_ENABLE 0x0080 /* pads short packets to 64 bytes */
+
+#define TCR_CLEAR 0 /* do NOTHING */
+/* the normal settings for the TCR register : */
+/* QUESTION: do I want to enable padding of short packets ? */
+#define TCR_NORMAL TCR_ENABLE
+
+
+#define EPH_STATUS 2
+#define ES_LINK_OK 0x4000 /* is the link integrity ok ? */
+
+#define RCR 4
+#define RCR_SOFTRESET 0x8000 /* resets the chip */
+#define RCR_STRIP_CRC 0x200 /* strips CRC */
+#define RCR_ENABLE 0x100 /* IFF this is set, we can receive packets */
+#define RCR_ALMUL 0x4 /* receive all multicast packets */
+#define RCR_PROMISC 0x2 /* enable promiscuous mode */
+
+/* the normal settings for the RCR register : */
+#define RCR_NORMAL (RCR_STRIP_CRC | RCR_ENABLE)
+#define RCR_CLEAR 0x0 /* set it to a base state */
+
+#define COUNTER 6
+#define MIR 8
+#define MCR 10
+/* 12 is reserved */
+
+/* BANK 1 */
+#define CONFIG 0
+#define CFG_AUI_SELECT 0x100
+#define BASE 2
+#define ADDR0 4
+#define ADDR1 6
+#define ADDR2 8
+#define GENERAL 10
+#define CONTROL 12
+#define CTL_POWERDOWN 0x2000
+#define CTL_LE_ENABLE 0x80
+#define CTL_CR_ENABLE 0x40
+#define CTL_TE_ENABLE 0x0020
+#define CTL_AUTO_RELEASE 0x0800
+#define CTL_EPROM_ACCESS 0x0003 /* high if Eprom is being read */
+
+/* BANK 2 */
+#define MMU_CMD 0
+#define MC_BUSY 1 /* only readable bit in the register */
+#define MC_NOP 0
+#define MC_ALLOC 0x20 /* or with number of 256 byte packets */
+#define MC_RESET 0x40
+#define MC_REMOVE 0x60 /* remove the current rx packet */
+#define MC_RELEASE 0x80 /* remove and release the current rx packet */
+#define MC_FREEPKT 0xA0 /* Release packet in PNR register */
+#define MC_ENQUEUE 0xC0 /* Enqueue the packet for transmit */
+
+#define PNR_ARR 2
+#define FIFO_PORTS 4
+
+#define FP_RXEMPTY 0x8000
+#define FP_TXEMPTY 0x80
+
+#define POINTER 6
+#define PTR_READ 0x2000
+#define PTR_RCV 0x8000
+#define PTR_AUTOINC 0x4000
+#define PTR_AUTO_INC 0x0040
+
+#define DATA_1 8
+#define DATA_2 10
+#define INTERRUPT 12
+
+#define INT_MASK 13
+#define IM_RCV_INT 0x1
+#define IM_TX_INT 0x2
+#define IM_TX_EMPTY_INT 0x4
+#define IM_ALLOC_INT 0x8
+#define IM_RX_OVRN_INT 0x10
+#define IM_EPH_INT 0x20
+#define IM_ERCV_INT 0x40 /* not on SMC9192 */
+
+/* BANK 3 */
+#define MULTICAST1 0
+#define MULTICAST2 2
+#define MULTICAST3 4
+#define MULTICAST4 6
+#define MGMT 8
+#define REVISION 10 /* ( hi: chip id low: rev # ) */
+
+
+/* this is NOT on SMC9192 */
+#define ERCV 12
+
+#define CHIP_9190 3
+#define CHIP_9194 4
+#define CHIP_9195 5
+#define CHIP_91100 7
+
+static const char * chip_ids[ 15 ] = {
+ NULL, NULL, NULL,
+ /* 3 */ "SMC91C90/91C92",
+ /* 4 */ "SMC91C94",
+ /* 5 */ "SMC91C95",
+ NULL,
+ /* 7 */ "SMC91C100",
+ /* 8 */ "SMC91C100FD",
+ NULL, NULL, NULL,
+ NULL, NULL, NULL};
+
+/*
+ . Transmit status bits
+*/
+#define TS_SUCCESS 0x0001
+#define TS_LOSTCAR 0x0400
+#define TS_LATCOL 0x0200
+#define TS_16COL 0x0010
+
+/*
+ . Receive status bits
+*/
+#define RS_ALGNERR 0x8000
+#define RS_BADCRC 0x2000
+#define RS_ODDFRAME 0x1000
+#define RS_TOOLONG 0x0800
+#define RS_TOOSHORT 0x0400
+#define RS_MULTICAST 0x0001
+#define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
+
+static const char * interfaces[ 2 ] = { "TP", "AUI" };
+
+/*-------------------------------------------------------------------------
+ . I define some macros to make it easier to do somewhat common
+ . or slightly complicated, repeated tasks.
+ --------------------------------------------------------------------------*/
+
+/* select a register bank, 0 to 3 */
+
+#define SMC_SELECT_BANK(x) { outw( x, ioaddr + BANK_SELECT ); }
+
+/* define a small delay for the reset */
+#define SMC_DELAY() { inw( ioaddr + RCR );\
+ inw( ioaddr + RCR );\
+ inw( ioaddr + RCR ); }
+
+/* this enables an interrupt in the interrupt mask register */
+#define SMC_ENABLE_INT(x) {\
+ unsigned char mask;\
+ SMC_SELECT_BANK(2);\
+ mask = inb( ioaddr + INT_MASK );\
+ mask |= (x);\
+ outb( mask, ioaddr + INT_MASK ); \
+}
+
+/* this disables an interrupt from the interrupt mask register */
+
+#define SMC_DISABLE_INT(x) {\
+ unsigned char mask;\
+ SMC_SELECT_BANK(2);\
+ mask = inb( ioaddr + INT_MASK );\
+ mask &= ~(x);\
+ outb( mask, ioaddr + INT_MASK ); \
+}
+
+/*----------------------------------------------------------------------
+ . Define the interrupts that I want to receive from the card
+ .
+ . I want:
+ . IM_EPH_INT, for nasty errors
+ . IM_RCV_INT, for happy received packets
+ . IM_RX_OVRN_INT, because I have to kick the receiver
+ --------------------------------------------------------------------------*/
+#define SMC_INTERRUPT_MASK (IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT)
+
+#endif /* _SMC_9194_H_ */
+