diff options
| author | Matthias Schiffer <matthias.schiffer@ew.tq-group.com> | 2021-10-12 12:34:02 +0200 |
|---|---|---|
| committer | Jakub Kicinski <kuba@kernel.org> | 2021-10-14 19:04:16 -0700 |
| commit | 67ca5159dbe2edb5dae7544447b8677d2596933a (patch) | |
| tree | 38a24fb2844bc939642192271e626adab315f144 /drivers/net/phy | |
| parent | e15f5972b8031f9069f41e24adff63bd34463b3a (diff) | |
| download | linux-67ca5159dbe2edb5dae7544447b8677d2596933a.tar.bz2 | |
net: phy: micrel: make *-skew-ps check more lenient
It seems reasonable to fine-tune only some of the skew values when using
one of the rgmii-*id PHY modes, and even when all skew values are
specified, using the correct ID PHY mode makes sense for documentation
purposes. Such a configuration also appears in the binding docs in
Documentation/devicetree/bindings/net/micrel-ksz90x1.txt, so the driver
should not warn about it.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/20211012103402.21438-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/micrel.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index b70f62efdbc3..ff452669130a 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -863,9 +863,9 @@ static int ksz9031_config_init(struct phy_device *phydev) MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4, tx_data_skews, 4, &update); - if (update && phydev->interface != PHY_INTERFACE_MODE_RGMII) + if (update && !phy_interface_is_rgmii(phydev)) phydev_warn(phydev, - "*-skew-ps values should be used only with phy-mode = \"rgmii\"\n"); + "*-skew-ps values should be used only with RGMII PHY modes\n"); /* Silicon Errata Sheet (DS80000691D or DS80000692D): * When the device links in the 1000BASE-T slave mode only, |