Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:

 - Add redirect_neigh() BPF packet redirect helper, allowing to limit
   stack traversal in common container configs and improving TCP
   back-pressure.

   Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.

 - Expand netlink policy support and improve policy export to user
   space. (Ge)netlink core performs request validation according to
   declared policies. Expand the expressiveness of those policies
   (min/max length and bitmasks). Allow dumping policies for particular
   commands. This is used for feature discovery by user space (instead
   of kernel version parsing or trial and error).

 - Support IGMPv3/MLDv2 multicast listener discovery protocols in
   bridge.

 - Allow more than 255 IPv4 multicast interfaces.

 - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
   packets of TCPv6.

 - In Multi-patch TCP (MPTCP) support concurrent transmission of data on
   multiple subflows in a load balancing scenario. Enhance advertising
   addresses via the RM_ADDR/ADD_ADDR options.

 - Support SMC-Dv2 version of SMC, which enables multi-subnet
   deployments.

 - Allow more calls to same peer in RxRPC.

 - Support two new Controller Area Network (CAN) protocols - CAN-FD and
   ISO 15765-2:2016.

 - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
   kernel problem.

 - Add TC actions for implementing MPLS L2 VPNs.

 - Improve nexthop code - e.g. handle various corner cases when nexthop
   objects are removed from groups better, skip unnecessary
   notifications and make it easier to offload nexthops into HW by
   converting to a blocking notifier.

 - Support adding and consuming TCP header options by BPF programs,
   opening the doors for easy experimental and deployment-specific TCP
   option use.

 - Reorganize TCP congestion control (CC) initialization to simplify
   life of TCP CC implemented in BPF.

 - Add support for shipping BPF programs with the kernel and loading
   them early on boot via the User Mode Driver mechanism, hence reusing
   all the user space infra we have.

 - Support sleepable BPF programs, initially targeting LSM and tracing.

 - Add bpf_d_path() helper for returning full path for given 'struct
   path'.

 - Make bpf_tail_call compatible with bpf-to-bpf calls.

 - Allow BPF programs to call map_update_elem on sockmaps.

 - Add BPF Type Format (BTF) support for type and enum discovery, as
   well as support for using BTF within the kernel itself (current use
   is for pretty printing structures).

 - Support listing and getting information about bpf_links via the bpf
   syscall.

 - Enhance kernel interfaces around NIC firmware update. Allow
   specifying overwrite mask to control if settings etc. are reset
   during update; report expected max time operation may take to users;
   support firmware activation without machine reboot incl. limits of
   how much impact reset may have (e.g. dropping link or not).

 - Extend ethtool configuration interface to report IEEE-standard
   counters, to limit the need for per-vendor logic in user space.

 - Adopt or extend devlink use for debug, monitoring, fw update in many
   drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
   dpaa2-eth).

 - In mlxsw expose critical and emergency SFP module temperature alarms.
   Refactor port buffer handling to make the defaults more suitable and
   support setting these values explicitly via the DCBNL interface.

 - Add XDP support for Intel's igb driver.

 - Support offloading TC flower classification and filtering rules to
   mscc_ocelot switches.

 - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
   fixed interval period pulse generator and one-step timestamping in
   dpaa-eth.

 - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
   offload.

 - Add Lynx PHY/PCS MDIO module, and convert various drivers which have
   this HW to use it. Convert mvpp2 to split PCS.

 - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
   7-port Mediatek MT7531 IP.

 - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
   and wcn3680 support in wcn36xx.

 - Improve performance for packets which don't require much offloads on
   recent Mellanox NICs by 20% by making multiple packets share a
   descriptor entry.

 - Move chelsio inline crypto drivers (for TLS and IPsec) from the
   crypto subtree to drivers/net. Move MDIO drivers out of the phy
   directory.

 - Clean up a lot of W=1 warnings, reportedly the actively developed
   subsections of networking drivers should now build W=1 warning free.

 - Make sure drivers don't use in_interrupt() to dynamically adapt their
   code. Convert tasklets to use new tasklet_setup API (sadly this
   conversion is not yet complete).

* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
  Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
  net, sockmap: Don't call bpf_prog_put() on NULL pointer
  bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
  bpf, sockmap: Add locking annotations to iterator
  netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
  net: fix pos incrementment in ipv6_route_seq_next
  net/smc: fix invalid return code in smcd_new_buf_create()
  net/smc: fix valid DMBE buffer sizes
  net/smc: fix use-after-free of delayed events
  bpfilter: Fix build error with CONFIG_BPFILTER_UMH
  cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
  net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
  bpf: Fix register equivalence tracking.
  rxrpc: Fix loss of final ack on shutdown
  rxrpc: Fix bundle counting for exclusive connections
  netfilter: restore NF_INET_NUMHOOKS
  ibmveth: Identify ingress large send packets.
  ibmveth: Switch order of ibmveth_helper calls.
  cxgb4: handle 4-tuple PEDIT to NAT mode translation
  selftests: Add VRF route leaking tests
  ...

1 files changed, 28 insertions, 19 deletions

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 0f0960971800..fb1db713b7fb 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -26,11 +26,16 @@
 #define RTL821x_EXT_PAGE_SELECT			0x1e
 #define RTL821x_PAGE_SELECT			0x1f
 
+#define RTL8211F_PHYCR1				0x18
 #define RTL8211F_INSR				0x1d
 
 #define RTL8211F_TX_DELAY			BIT(8)
 #define RTL8211F_RX_DELAY			BIT(3)
 
+#define RTL8211F_ALDPS_PLL_OFF			BIT(1)
+#define RTL8211F_ALDPS_ENABLE			BIT(2)
+#define RTL8211F_ALDPS_XTAL_OFF			BIT(12)
+
 #define RTL8211E_CTRL_DELAY			BIT(13)
 #define RTL8211E_TX_DELAY			BIT(12)
 #define RTL8211E_RX_DELAY			BIT(11)
@@ -177,8 +182,12 @@ static int rtl8211f_config_init(struct phy_device *phydev)
 {
 	struct device *dev = &phydev->mdio.dev;
 	u16 val_txdly, val_rxdly;
+	u16 val;
 	int ret;
 
+	val = RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_XTAL_OFF;
+	phy_modify_paged_changed(phydev, 0xa43, RTL8211F_PHYCR1, val, val);
+
 	switch (phydev->interface) {
 	case PHY_INTERFACE_MODE_RGMII:
 		val_txdly = 0;
@@ -401,7 +410,7 @@ static int rtlgen_write_mmd(struct phy_device *phydev, int devnum, u16 regnum,
 	return ret;
 }
 
-static int rtl8125_read_mmd(struct phy_device *phydev, int devnum, u16 regnum)
+static int rtl822x_read_mmd(struct phy_device *phydev, int devnum, u16 regnum)
 {
 	int ret = rtlgen_read_mmd(phydev, devnum, regnum);
 
@@ -425,7 +434,7 @@ static int rtl8125_read_mmd(struct phy_device *phydev, int devnum, u16 regnum)
 	return ret;
 }
 
-static int rtl8125_write_mmd(struct phy_device *phydev, int devnum, u16 regnum,
+static int rtl822x_write_mmd(struct phy_device *phydev, int devnum, u16 regnum,
 			     u16 val)
 {
 	int ret = rtlgen_write_mmd(phydev, devnum, regnum, val);
@@ -442,7 +451,7 @@ static int rtl8125_write_mmd(struct phy_device *phydev, int devnum, u16 regnum,
 	return ret;
 }
 
-static int rtl8125_get_features(struct phy_device *phydev)
+static int rtl822x_get_features(struct phy_device *phydev)
 {
 	int val;
 
@@ -460,7 +469,7 @@ static int rtl8125_get_features(struct phy_device *phydev)
 	return genphy_read_abilities(phydev);
 }
 
-static int rtl8125_config_aneg(struct phy_device *phydev)
+static int rtl822x_config_aneg(struct phy_device *phydev)
 {
 	int ret = 0;
 
@@ -480,7 +489,7 @@ static int rtl8125_config_aneg(struct phy_device *phydev)
 	return __genphy_config_aneg(phydev, ret);
 }
 
-static int rtl8125_read_status(struct phy_device *phydev)
+static int rtl822x_read_status(struct phy_device *phydev)
 {
 	int ret;
 
@@ -522,7 +531,7 @@ static int rtlgen_match_phy_device(struct phy_device *phydev)
 	       !rtlgen_supports_2_5gbps(phydev);
 }
 
-static int rtl8125_match_phy_device(struct phy_device *phydev)
+static int rtl8226_match_phy_device(struct phy_device *phydev)
 {
 	return phydev->phy_id == RTL_GENERIC_PHYID &&
 	       rtlgen_supports_2_5gbps(phydev);
@@ -627,29 +636,29 @@ static struct phy_driver realtek_drvs[] = {
 		.read_mmd	= rtlgen_read_mmd,
 		.write_mmd	= rtlgen_write_mmd,
 	}, {
-		.name		= "RTL8125 2.5Gbps internal",
-		.match_phy_device = rtl8125_match_phy_device,
-		.get_features	= rtl8125_get_features,
-		.config_aneg	= rtl8125_config_aneg,
-		.read_status	= rtl8125_read_status,
+		.name		= "RTL8226 2.5Gbps PHY",
+		.match_phy_device = rtl8226_match_phy_device,
+		.get_features	= rtl822x_get_features,
+		.config_aneg	= rtl822x_config_aneg,
+		.read_status	= rtl822x_read_status,
 		.suspend	= genphy_suspend,
 		.resume		= rtlgen_resume,
 		.read_page	= rtl821x_read_page,
 		.write_page	= rtl821x_write_page,
-		.read_mmd	= rtl8125_read_mmd,
-		.write_mmd	= rtl8125_write_mmd,
+		.read_mmd	= rtl822x_read_mmd,
+		.write_mmd	= rtl822x_write_mmd,
 	}, {
 		PHY_ID_MATCH_EXACT(0x001cc840),
-		.name		= "RTL8125B 2.5Gbps internal",
-		.get_features	= rtl8125_get_features,
-		.config_aneg	= rtl8125_config_aneg,
-		.read_status	= rtl8125_read_status,
+		.name		= "RTL8226B_RTL8221B 2.5Gbps PHY",
+		.get_features	= rtl822x_get_features,
+		.config_aneg	= rtl822x_config_aneg,
+		.read_status	= rtl822x_read_status,
 		.suspend	= genphy_suspend,
 		.resume		= rtlgen_resume,
 		.read_page	= rtl821x_read_page,
 		.write_page	= rtl821x_write_page,
-		.read_mmd	= rtl8125_read_mmd,
-		.write_mmd	= rtl8125_write_mmd,
+		.read_mmd	= rtl822x_read_mmd,
+		.write_mmd	= rtl822x_write_mmd,
 	}, {
 		PHY_ID_MATCH_EXACT(0x001cc961),
 		.name		= "RTL8366RB Gigabit Ethernet",