Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.

   2) Add fib_sync_mem to control the amount of dirty memory we allow to
      queue up between synchronize RCU calls, from David Ahern.

   3) Make flow classifier more lockless, from Vlad Buslov.

   4) Add PHY downshift support to aquantia driver, from Heiner
      Kallweit.

   5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
      contention on SLAB spinlocks in heavy RPC workloads.

   6) Partial GSO offload support in XFRM, from Boris Pismenny.

   7) Add fast link down support to ethtool, from Heiner Kallweit.

   8) Use siphash for IP ID generator, from Eric Dumazet.

   9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
      entries, from David Ahern.

  10) Move skb->xmit_more into a per-cpu variable, from Florian
      Westphal.

  11) Improve eBPF verifier speed and increase maximum program size,
      from Alexei Starovoitov.

  12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
      spinlocks. From Neil Brown.

  13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.

  14) Improve link partner cap detection in generic PHY code, from
      Heiner Kallweit.

  15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
      Maguire.

  16) Remove SKB list implementation assumptions in SCTP, your's truly.

  17) Various cleanups, optimizations, and simplifications in r8169
      driver. From Heiner Kallweit.

  18) Add memory accounting on TX and RX path of SCTP, from Xin Long.

  19) Switch PHY drivers over to use dynamic featue detection, from
      Heiner Kallweit.

  20) Support flow steering without masking in dpaa2-eth, from Ioana
      Ciocoi.

  21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
      Pirko.

  22) Increase the strict parsing of current and future netlink
      attributes, also export such policies to userspace. From Johannes
      Berg.

  23) Allow DSA tag drivers to be modular, from Andrew Lunn.

  24) Remove legacy DSA probing support, also from Andrew Lunn.

  25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
      Haabendal.

  26) Add a generic tracepoint for TX queue timeouts to ease debugging,
      from Cong Wang.

  27) More indirect call optimizations, from Paolo Abeni"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
  cxgb4: Fix error path in cxgb4_init_module
  net: phy: improve pause mode reporting in phy_print_status
  dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
  net: macb: Change interrupt and napi enable order in open
  net: ll_temac: Improve error message on error IRQ
  net/sched: remove block pointer from common offload structure
  net: ethernet: support of_get_mac_address new ERR_PTR error
  net: usb: smsc: fix warning reported by kbuild test robot
  staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
  net: dsa: support of_get_mac_address new ERR_PTR error
  net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
  vrf: sit mtu should not be updated when vrf netdev is the link
  net: dsa: Fix error cleanup path in dsa_init_module
  l2tp: Fix possible NULL pointer dereference
  taprio: add null check on sched_nest to avoid potential null pointer dereference
  net: mvpp2: cls: fix less than zero check on a u32 variable
  net_sched: sch_fq: handle non connected flows
  net_sched: sch_fq: do not assume EDT packets are ordered
  net: hns3: use devm_kcalloc when allocating desc_cb
  net: hns3: some cleanup for struct hns3_enet_ring
  ...

1 files changed, 7 insertions, 75 deletions

diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index b8415f8fae14..8fc33867e524 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -37,77 +37,10 @@
 #define MII_BCM7XXX_SHD_3_TL4		0x23
 #define  MII_BCM7XXX_TL4_RST_MSK	(BIT(2) | BIT(1))
 
-/* 28nm only register definitions */
-#define MISC_ADDR(base, channel)	base, channel
-
-#define DSP_TAP10			MISC_ADDR(0x0a, 0)
-#define PLL_PLLCTRL_1			MISC_ADDR(0x32, 1)
-#define PLL_PLLCTRL_2			MISC_ADDR(0x32, 2)
-#define PLL_PLLCTRL_4			MISC_ADDR(0x33, 0)
-
-#define AFE_RXCONFIG_0			MISC_ADDR(0x38, 0)
-#define AFE_RXCONFIG_1			MISC_ADDR(0x38, 1)
-#define AFE_RXCONFIG_2			MISC_ADDR(0x38, 2)
-#define AFE_RX_LP_COUNTER		MISC_ADDR(0x38, 3)
-#define AFE_TX_CONFIG			MISC_ADDR(0x39, 0)
-#define AFE_VDCA_ICTRL_0		MISC_ADDR(0x39, 1)
-#define AFE_VDAC_OTHERS_0		MISC_ADDR(0x39, 3)
-#define AFE_HPF_TRIM_OTHERS		MISC_ADDR(0x3a, 0)
-
 struct bcm7xxx_phy_priv {
 	u64	*stats;
 };
 
-static void r_rc_cal_reset(struct phy_device *phydev)
-{
-	/* Reset R_CAL/RC_CAL Engine */
-	bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0010);
-
-	/* Disable Reset R_AL/RC_CAL Engine */
-	bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0000);
-}
-
-static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
-{
-	/* Increase VCO range to prevent unlocking problem of PLL at low
-	 * temp
-	 */
-	bcm_phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048);
-
-	/* Change Ki to 011 */
-	bcm_phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b);
-
-	/* Disable loading of TVCO buffer to bandgap, set bandgap trim
-	 * to 111
-	 */
-	bcm_phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20);
-
-	/* Adjust bias current trim by -3 */
-	bcm_phy_write_misc(phydev, DSP_TAP10, 0x690b);
-
-	/* Switch to CORE_BASE1E */
-	phy_write(phydev, MII_BRCM_CORE_BASE1E, 0xd);
-
-	r_rc_cal_reset(phydev);
-
-	/* write AFE_RXCONFIG_0 */
-	bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
-
-	/* write AFE_RXCONFIG_1 */
-	bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
-
-	/* write AFE_RX_LP_COUNTER */
-	bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
-
-	/* write AFE_HPF_TRIM_OTHERS */
-	bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
-
-	/* write AFTE_TX_CONFIG */
-	bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
-
-	return 0;
-}
-
 static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
 {
 	/* AFE_RXCONFIG_0 */
@@ -143,7 +76,7 @@ static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
 	bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b);
 
 	/* Reset R_CAL/RC_CAL engine */
-	r_rc_cal_reset(phydev);
+	bcm_phy_r_rc_cal_reset(phydev);
 
 	return 0;
 }
@@ -171,7 +104,7 @@ static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev)
 	bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b);
 
 	/* Reset R_CAL/RC_CAL engine */
-	r_rc_cal_reset(phydev);
+	bcm_phy_r_rc_cal_reset(phydev);
 
 	return 0;
 }
@@ -196,7 +129,7 @@ static int bcm7xxx_28nm_a0_patch_afe_config_init(struct phy_device *phydev)
 	/* Enable ffe zero detection for Vitesse interoperability */
 	bcm_phy_write_misc(phydev, 0x26, 0x2, 0x0015);
 
-	r_rc_cal_reset(phydev);
+	bcm_phy_r_rc_cal_reset(phydev);
 
 	return 0;
 }
@@ -227,7 +160,7 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
 	switch (rev) {
 	case 0xa0:
 	case 0xb0:
-		ret = bcm7xxx_28nm_b0_afe_config_init(phydev);
+		ret = bcm_phy_28nm_a0b0_afe_config_init(phydev);
 		break;
 	case 0xd0:
 		ret = bcm7xxx_28nm_d0_afe_config_init(phydev);
@@ -605,7 +538,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
 	.phy_id		= (_oui),					\
 	.phy_id_mask	= 0xfffffff0,					\
 	.name		= _name,					\
-	.features	= PHY_GBIT_FEATURES,				\
+	/* PHY_GBIT_FEATURES */						\
 	.flags		= PHY_IS_INTERNAL,				\
 	.config_init	= bcm7xxx_28nm_config_init,			\
 	.resume		= bcm7xxx_28nm_resume,				\
@@ -622,7 +555,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
 	.phy_id		= (_oui),					\
 	.phy_id_mask	= 0xfffffff0,					\
 	.name		= _name,					\
-	.features	= PHY_BASIC_FEATURES,				\
+	/* PHY_BASIC_FEATURES */					\
 	.flags		= PHY_IS_INTERNAL,				\
 	.config_init	= bcm7xxx_28nm_ephy_config_init,		\
 	.resume		= bcm7xxx_28nm_ephy_resume,			\
@@ -637,7 +570,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
 	.phy_id         = (_oui),					\
 	.phy_id_mask    = 0xfffffff0,					\
 	.name           = _name,					\
-	.features       = PHY_BASIC_FEATURES,				\
+	/* PHY_BASIC_FEATURES */					\
 	.flags          = PHY_IS_INTERNAL,				\
 	.config_init    = bcm7xxx_config_init,				\
 	.suspend        = bcm7xxx_suspend,				\
@@ -657,7 +590,6 @@ static struct phy_driver bcm7xxx_driver[] = {
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7439_2, "Broadcom BCM7439 (2)"),
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7445, "Broadcom BCM7445"),
-	BCM7XXX_28NM_GPHY(PHY_ID_BCM_OMEGA, "Broadcom Omega Combo GPHY"),
 	BCM7XXX_40NM_EPHY(PHY_ID_BCM7346, "Broadcom BCM7346"),
 	BCM7XXX_40NM_EPHY(PHY_ID_BCM7362, "Broadcom BCM7362"),
 	BCM7XXX_40NM_EPHY(PHY_ID_BCM7425, "Broadcom BCM7425"),