diff options
| author | Jonathan McDowell <noodles@earth.li> | 2022-01-31 13:56:41 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2022-02-01 11:57:09 +0000 |
| commit | 881cc731df6af99a21622e9be25a23b81adcd10b (patch) | |
| tree | 8e810d5dff9faaf3ebd22e829d895cda4f28a19e /drivers/net/phy/at803x.c | |
| parent | 9cef24c8b76c1f6effe499d2f131807c90f7ce9a (diff) | |
| download | linux-881cc731df6af99a21622e9be25a23b81adcd10b.tar.bz2 | |
net: phy: Fix qca8081 with speeds lower than 2.5Gb/s
A typo in qca808x_read_status means we try to set SMII mode on the port
rather than SGMII when the link speed is not 2.5Gb/s. This results in no
traffic due to the mismatch in configuration between the phy and the
mac.
v2:
Only change interface mode when the link is up
Fixes: 79c7bc0521545 ("net: phy: add qca8081 read_status")
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/phy/at803x.c')
| -rw-r--r-- | drivers/net/phy/at803x.c | 26 |
1 files changed, 13 insertions, 13 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 5b6c0d120e09..29aa811af430 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -1688,19 +1688,19 @@ static int qca808x_read_status(struct phy_device *phydev) if (ret < 0) return ret; - if (phydev->link && phydev->speed == SPEED_2500) - phydev->interface = PHY_INTERFACE_MODE_2500BASEX; - else - phydev->interface = PHY_INTERFACE_MODE_SMII; - - /* generate seed as a lower random value to make PHY linked as SLAVE easily, - * except for master/slave configuration fault detected. - * the reason for not putting this code into the function link_change_notify is - * the corner case where the link partner is also the qca8081 PHY and the seed - * value is configured as the same value, the link can't be up and no link change - * occurs. - */ - if (!phydev->link) { + if (phydev->link) { + if (phydev->speed == SPEED_2500) + phydev->interface = PHY_INTERFACE_MODE_2500BASEX; + else + phydev->interface = PHY_INTERFACE_MODE_SGMII; + } else { + /* generate seed as a lower random value to make PHY linked as SLAVE easily, + * except for master/slave configuration fault detected. + * the reason for not putting this code into the function link_change_notify is + * the corner case where the link partner is also the qca8081 PHY and the seed + * value is configured as the same value, the link can't be up and no link change + * occurs. + */ if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR) { qca808x_phy_ms_seed_enable(phydev, false); } else { |