diff options
author | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-03-30 03:47:06 -0700 |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-08-10 19:53:41 -0700 |
commit | ca7a8e85262e93065b2a49dfb96a24d4a534a049 (patch) | |
tree | 6fa505e3e6597548edd53b8faa559c6dff5a2bb8 /drivers/net/ethernet | |
parent | c1abc95b157fe4574919942018af143203ecca8e (diff) | |
download | linux-ca7a8e85262e93065b2a49dfb96a24d4a534a049.tar.bz2 |
3c*/acenic/typhoon: Move 3Com Ethernet drivers
Moves the 3Com drivers into drivers/net/ethernet/3com/ and the necessary
Kconfig and Makefile changes.
Did not move the following drivers becuase they use a non-3Com
chipset: 3c503, 3c505, 3c507, 3c523 and 3c527
CC: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
CC: David Dillow <dave@thedillows.org>
CC: Jes Sorensen <jes@trained-monkey.org>
CC: Alan Cox <alan@linux.intel.com>
CC: David Hinds <dahinds@users.sourceforge.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: David Dillow <dave@thedillows.org>
Diffstat (limited to 'drivers/net/ethernet')
-rw-r--r-- | drivers/net/ethernet/3com/3c501.c | 896 | ||||
-rw-r--r-- | drivers/net/ethernet/3com/3c501.h | 91 | ||||
-rw-r--r-- | drivers/net/ethernet/3com/3c509.c | 1594 | ||||
-rw-r--r-- | drivers/net/ethernet/3com/3c515.c | 1584 | ||||
-rw-r--r-- | drivers/net/ethernet/3com/3c574_cs.c | 1181 | ||||
-rw-r--r-- | drivers/net/ethernet/3com/3c589_cs.c | 943 | ||||
-rw-r--r-- | drivers/net/ethernet/3com/3c59x.c | 3326 | ||||
-rw-r--r-- | drivers/net/ethernet/3com/Kconfig | 147 | ||||
-rw-r--r-- | drivers/net/ethernet/3com/Makefile | 12 | ||||
-rw-r--r-- | drivers/net/ethernet/3com/acenic.c | 3206 | ||||
-rw-r--r-- | drivers/net/ethernet/3com/acenic.h | 790 | ||||
-rw-r--r-- | drivers/net/ethernet/3com/typhoon.c | 2574 | ||||
-rw-r--r-- | drivers/net/ethernet/3com/typhoon.h | 624 | ||||
-rw-r--r-- | drivers/net/ethernet/Kconfig | 2 | ||||
-rw-r--r-- | drivers/net/ethernet/Makefile | 2 |
15 files changed, 16972 insertions, 0 deletions
diff --git a/drivers/net/ethernet/3com/3c501.c b/drivers/net/ethernet/3com/3c501.c new file mode 100644 index 000000000000..5420f6de27df --- /dev/null +++ b/drivers/net/ethernet/3com/3c501.c @@ -0,0 +1,896 @@ +/* 3c501.c: A 3Com 3c501 Ethernet driver for Linux. */ +/* + Written 1992,1993,1994 Donald Becker + + Copyright 1993 United States Government as represented by the + Director, National Security Agency. This software may be used and + distributed according to the terms of the GNU General Public License, + incorporated herein by reference. + + This is a device driver for the 3Com Etherlink 3c501. + Do not purchase this card, even as a joke. It's performance is horrible, + and it breaks in many ways. + + The original author may be reached as becker@scyld.com, or C/O + Scyld Computing Corporation + 410 Severn Ave., Suite 210 + Annapolis MD 21403 + + Fixed (again!) the missing interrupt locking on TX/RX shifting. + Alan Cox <alan@lxorguk.ukuu.org.uk> + + Removed calls to init_etherdev since they are no longer needed, and + cleaned up modularization just a bit. The driver still allows only + the default address for cards when loaded as a module, but that's + really less braindead than anyone using a 3c501 board. :) + 19950208 (invid@msen.com) + + Added traps for interrupts hitting the window as we clear and TX load + the board. Now getting 150K/second FTP with a 3c501 card. Still playing + with a TX-TX optimisation to see if we can touch 180-200K/second as seems + theoretically maximum. + 19950402 Alan Cox <alan@lxorguk.ukuu.org.uk> + + Cleaned up for 2.3.x because we broke SMP now. + 20000208 Alan Cox <alan@lxorguk.ukuu.org.uk> + + Check up pass for 2.5. Nothing significant changed + 20021009 Alan Cox <alan@lxorguk.ukuu.org.uk> + + Fixed zero fill corner case + 20030104 Alan Cox <alan@lxorguk.ukuu.org.uk> + + + For the avoidance of doubt the "preferred form" of this code is one which + is in an open non patent encumbered format. Where cryptographic key signing + forms part of the process of creating an executable the information + including keys needed to generate an equivalently functional executable + are deemed to be part of the source code. + +*/ + + +/** + * DOC: 3c501 Card Notes + * + * Some notes on this thing if you have to hack it. [Alan] + * + * Some documentation is available from 3Com. Due to the boards age + * standard responses when you ask for this will range from 'be serious' + * to 'give it to a museum'. The documentation is incomplete and mostly + * of historical interest anyway. + * + * The basic system is a single buffer which can be used to receive or + * transmit a packet. A third command mode exists when you are setting + * things up. + * + * If it's transmitting it's not receiving and vice versa. In fact the + * time to get the board back into useful state after an operation is + * quite large. + * + * The driver works by keeping the board in receive mode waiting for a + * packet to arrive. When one arrives it is copied out of the buffer + * and delivered to the kernel. The card is reloaded and off we go. + * + * When transmitting lp->txing is set and the card is reset (from + * receive mode) [possibly losing a packet just received] to command + * mode. A packet is loaded and transmit mode triggered. The interrupt + * handler runs different code for transmit interrupts and can handle + * returning to receive mode or retransmissions (yes you have to help + * out with those too). + * + * DOC: Problems + * + * There are a wide variety of undocumented error returns from the card + * and you basically have to kick the board and pray if they turn up. Most + * only occur under extreme load or if you do something the board doesn't + * like (eg touching a register at the wrong time). + * + * The driver is less efficient than it could be. It switches through + * receive mode even if more transmits are queued. If this worries you buy + * a real Ethernet card. + * + * The combination of slow receive restart and no real multicast + * filter makes the board unusable with a kernel compiled for IP + * multicasting in a real multicast environment. That's down to the board, + * but even with no multicast programs running a multicast IP kernel is + * in group 224.0.0.1 and you will therefore be listening to all multicasts. + * One nv conference running over that Ethernet and you can give up. + * + */ + +#define DRV_NAME "3c501" +#define DRV_VERSION "2002/10/09" + + +static const char version[] = + DRV_NAME ".c: " DRV_VERSION " Alan Cox (alan@lxorguk.ukuu.org.uk).\n"; + +/* + * Braindamage remaining: + * The 3c501 board. + */ + +#include <linux/module.h> + +#include <linux/kernel.h> +#include <linux/fcntl.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/spinlock.h> +#include <linux/ethtool.h> +#include <linux/delay.h> +#include <linux/bitops.h> + +#include <asm/uaccess.h> +#include <asm/io.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/init.h> + +#include "3c501.h" + +/* + * The boilerplate probe code. + */ + +static int io = 0x280; +static int irq = 5; +static int mem_start; + +/** + * el1_probe: - probe for a 3c501 + * @dev: The device structure passed in to probe. + * + * This can be called from two places. The network layer will probe using + * a device structure passed in with the probe information completed. For a + * modular driver we use #init_module to fill in our own structure and probe + * for it. + * + * Returns 0 on success. ENXIO if asked not to probe and ENODEV if asked to + * probe and failing to find anything. + */ + +struct net_device * __init el1_probe(int unit) +{ + struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); + static const unsigned ports[] = { 0x280, 0x300, 0}; + const unsigned *port; + int err = 0; + + if (!dev) + return ERR_PTR(-ENOMEM); + + if (unit >= 0) { + sprintf(dev->name, "eth%d", unit); + netdev_boot_setup_check(dev); + io = dev->base_addr; + irq = dev->irq; + mem_start = dev->mem_start & 7; + } + + if (io > 0x1ff) { /* Check a single specified location. */ + err = el1_probe1(dev, io); + } else if (io != 0) { + err = -ENXIO; /* Don't probe at all. */ + } else { + for (port = ports; *port && el1_probe1(dev, *port); port++) + ; + if (!*port) + err = -ENODEV; + } + if (err) + goto out; + err = register_netdev(dev); + if (err) + goto out1; + return dev; +out1: + release_region(dev->base_addr, EL1_IO_EXTENT); +out: + free_netdev(dev); + return ERR_PTR(err); +} + +static const struct net_device_ops el_netdev_ops = { + .ndo_open = el_open, + .ndo_stop = el1_close, + .ndo_start_xmit = el_start_xmit, + .ndo_tx_timeout = el_timeout, + .ndo_set_multicast_list = set_multicast_list, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + +/** + * el1_probe1: + * @dev: The device structure to use + * @ioaddr: An I/O address to probe at. + * + * The actual probe. This is iterated over by #el1_probe in order to + * check all the applicable device locations. + * + * Returns 0 for a success, in which case the device is activated, + * EAGAIN if the IRQ is in use by another driver, and ENODEV if the + * board cannot be found. + */ + +static int __init el1_probe1(struct net_device *dev, int ioaddr) +{ + struct net_local *lp; + const char *mname; /* Vendor name */ + unsigned char station_addr[6]; + int autoirq = 0; + int i; + + /* + * Reserve I/O resource for exclusive use by this driver + */ + + if (!request_region(ioaddr, EL1_IO_EXTENT, DRV_NAME)) + return -ENODEV; + + /* + * Read the station address PROM data from the special port. + */ + + for (i = 0; i < 6; i++) { + outw(i, ioaddr + EL1_DATAPTR); + station_addr[i] = inb(ioaddr + EL1_SAPROM); + } + /* + * Check the first three octets of the S.A. for 3Com's prefix, or + * for the Sager NP943 prefix. + */ + + if (station_addr[0] == 0x02 && station_addr[1] == 0x60 && + station_addr[2] == 0x8c) + mname = "3c501"; + else if (station_addr[0] == 0x00 && station_addr[1] == 0x80 && + station_addr[2] == 0xC8) + mname = "NP943"; + else { + release_region(ioaddr, EL1_IO_EXTENT); + return -ENODEV; + } + + /* + * We auto-IRQ by shutting off the interrupt line and letting it + * float high. + */ + + dev->irq = irq; + + if (dev->irq < 2) { + unsigned long irq_mask; + + irq_mask = probe_irq_on(); + inb(RX_STATUS); /* Clear pending interrupts. */ + inb(TX_STATUS); + outb(AX_LOOP + 1, AX_CMD); + + outb(0x00, AX_CMD); + + mdelay(20); + autoirq = probe_irq_off(irq_mask); + + if (autoirq == 0) { + pr_warning("%s probe at %#x failed to detect IRQ line.\n", + mname, ioaddr); + release_region(ioaddr, EL1_IO_EXTENT); + return -EAGAIN; + } + } + + outb(AX_RESET+AX_LOOP, AX_CMD); /* Loopback mode. */ + dev->base_addr = ioaddr; + memcpy(dev->dev_addr, station_addr, ETH_ALEN); + + if (mem_start & 0xf) + el_debug = mem_start & 0x7; + if (autoirq) + dev->irq = autoirq; + + pr_info("%s: %s EtherLink at %#lx, using %sIRQ %d.\n", + dev->name, mname, dev->base_addr, + autoirq ? "auto":"assigned ", dev->irq); + +#ifdef CONFIG_IP_MULTICAST + pr_warning("WARNING: Use of the 3c501 in a multicast kernel is NOT recommended.\n"); +#endif + + if (el_debug) + pr_debug("%s", version); + + lp = netdev_priv(dev); + memset(lp, 0, sizeof(struct net_local)); + spin_lock_init(&lp->lock); + + /* + * The EL1-specific entries in the device structure. + */ + + dev->netdev_ops = &el_netdev_ops; + dev->watchdog_timeo = HZ; + dev->ethtool_ops = &netdev_ethtool_ops; + return 0; +} + +/** + * el1_open: + * @dev: device that is being opened + * + * When an ifconfig is issued which changes the device flags to include + * IFF_UP this function is called. It is only called when the change + * occurs, not when the interface remains up. #el1_close will be called + * when it goes down. + * + * Returns 0 for a successful open, or -EAGAIN if someone has run off + * with our interrupt line. + */ + +static int el_open(struct net_device *dev) +{ + int retval; + int ioaddr = dev->base_addr; + struct net_local *lp = netdev_priv(dev); + unsigned long flags; + + if (el_debug > 2) + pr_debug("%s: Doing el_open()...\n", dev->name); + + retval = request_irq(dev->irq, el_interrupt, 0, dev->name, dev); + if (retval) + return retval; + + spin_lock_irqsave(&lp->lock, flags); + el_reset(dev); + spin_unlock_irqrestore(&lp->lock, flags); + + lp->txing = 0; /* Board in RX mode */ + outb(AX_RX, AX_CMD); /* Aux control, irq and receive enabled */ + netif_start_queue(dev); + return 0; +} + +/** + * el_timeout: + * @dev: The 3c501 card that has timed out + * + * Attempt to restart the board. This is basically a mixture of extreme + * violence and prayer + * + */ + +static void el_timeout(struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + + if (el_debug) + pr_debug("%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n", + dev->name, inb(TX_STATUS), + inb(AX_STATUS), inb(RX_STATUS)); + dev->stats.tx_errors++; + outb(TX_NORM, TX_CMD); + outb(RX_NORM, RX_CMD); + outb(AX_OFF, AX_CMD); /* Just trigger a false interrupt. */ + outb(AX_RX, AX_CMD); /* Aux control, irq and receive enabled */ + lp->txing = 0; /* Ripped back in to RX */ + netif_wake_queue(dev); +} + + +/** + * el_start_xmit: + * @skb: The packet that is queued to be sent + * @dev: The 3c501 card we want to throw it down + * + * Attempt to send a packet to a 3c501 card. There are some interesting + * catches here because the 3c501 is an extremely old and therefore + * stupid piece of technology. + * + * If we are handling an interrupt on the other CPU we cannot load a packet + * as we may still be attempting to retrieve the last RX packet buffer. + * + * When a transmit times out we dump the card into control mode and just + * start again. It happens enough that it isn't worth logging. + * + * We avoid holding the spin locks when doing the packet load to the board. + * The device is very slow, and its DMA mode is even slower. If we held the + * lock while loading 1500 bytes onto the controller we would drop a lot of + * serial port characters. This requires we do extra locking, but we have + * no real choice. + */ + +static netdev_tx_t el_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + unsigned long flags; + + /* + * Avoid incoming interrupts between us flipping txing and flipping + * mode as the driver assumes txing is a faithful indicator of card + * state + */ + + spin_lock_irqsave(&lp->lock, flags); + + /* + * Avoid timer-based retransmission conflicts. + */ + + netif_stop_queue(dev); + + do { + int len = skb->len; + int pad = 0; + int gp_start; + unsigned char *buf = skb->data; + + if (len < ETH_ZLEN) + pad = ETH_ZLEN - len; + + gp_start = 0x800 - (len + pad); + + lp->tx_pkt_start = gp_start; + lp->collisions = 0; + + dev->stats.tx_bytes += skb->len; + + /* + * Command mode with status cleared should [in theory] + * mean no more interrupts can be pending on the card. + */ + + outb_p(AX_SYS, AX_CMD); + inb_p(RX_STATUS); + inb_p(TX_STATUS); + + lp->loading = 1; + lp->txing = 1; + + /* + * Turn interrupts back on while we spend a pleasant + * afternoon loading bytes into the board + */ + + spin_unlock_irqrestore(&lp->lock, flags); + + /* Set rx packet area to 0. */ + outw(0x00, RX_BUF_CLR); + /* aim - packet will be loaded into buffer start */ + outw(gp_start, GP_LOW); + /* load buffer (usual thing each byte increments the pointer) */ + outsb(DATAPORT, buf, len); + if (pad) { + while (pad--) /* Zero fill buffer tail */ + outb(0, DATAPORT); + } + /* the board reuses the same register */ + outw(gp_start, GP_LOW); + + if (lp->loading != 2) { + /* fire ... Trigger xmit. */ + outb(AX_XMIT, AX_CMD); + lp->loading = 0; + if (el_debug > 2) + pr_debug(" queued xmit.\n"); + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + /* A receive upset our load, despite our best efforts */ + if (el_debug > 2) + pr_debug("%s: burped during tx load.\n", dev->name); + spin_lock_irqsave(&lp->lock, flags); + } while (1); +} + +/** + * el_interrupt: + * @irq: Interrupt number + * @dev_id: The 3c501 that burped + * + * Handle the ether interface interrupts. The 3c501 needs a lot more + * hand holding than most cards. In particular we get a transmit interrupt + * with a collision error because the board firmware isn't capable of rewinding + * its own transmit buffer pointers. It can however count to 16 for us. + * + * On the receive side the card is also very dumb. It has no buffering to + * speak of. We simply pull the packet out of its PIO buffer (which is slow) + * and queue it for the kernel. Then we reset the card for the next packet. + * + * We sometimes get surprise interrupts late both because the SMP IRQ delivery + * is message passing and because the card sometimes seems to deliver late. I + * think if it is part way through a receive and the mode is changed it carries + * on receiving and sends us an interrupt. We have to band aid all these cases + * to get a sensible 150kBytes/second performance. Even then you want a small + * TCP window. + */ + +static irqreturn_t el_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct net_local *lp; + int ioaddr; + int axsr; /* Aux. status reg. */ + + ioaddr = dev->base_addr; + lp = netdev_priv(dev); + + spin_lock(&lp->lock); + + /* + * What happened ? + */ + + axsr = inb(AX_STATUS); + + /* + * Log it + */ + + if (el_debug > 3) + pr_debug("%s: el_interrupt() aux=%#02x\n", dev->name, axsr); + + if (lp->loading == 1 && !lp->txing) + pr_warning("%s: Inconsistent state loading while not in tx\n", + dev->name); + + if (lp->txing) { + /* + * Board in transmit mode. May be loading. If we are + * loading we shouldn't have got this. + */ + int txsr = inb(TX_STATUS); + + if (lp->loading == 1) { + if (el_debug > 2) + pr_debug("%s: Interrupt while loading [txsr=%02x gp=%04x rp=%04x]\n", + dev->name, txsr, inw(GP_LOW), inw(RX_LOW)); + + /* Force a reload */ + lp->loading = 2; + spin_unlock(&lp->lock); + goto out; + } + if (el_debug > 6) + pr_debug("%s: txsr=%02x gp=%04x rp=%04x\n", dev->name, + txsr, inw(GP_LOW), inw(RX_LOW)); + + if ((axsr & 0x80) && (txsr & TX_READY) == 0) { + /* + * FIXME: is there a logic to whether to keep + * on trying or reset immediately ? + */ + if (el_debug > 1) + pr_debug("%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x gp=%03x rp=%03x.\n", + dev->name, txsr, axsr, + inw(ioaddr + EL1_DATAPTR), + inw(ioaddr + EL1_RXPTR)); + lp->txing = 0; + netif_wake_queue(dev); + } else if (txsr & TX_16COLLISIONS) { + /* + * Timed out + */ + if (el_debug) + pr_debug("%s: Transmit failed 16 times, Ethernet jammed?\n", dev->name); + outb(AX_SYS, AX_CMD); + lp->txing = 0; + dev->stats.tx_aborted_errors++; + netif_wake_queue(dev); + } else if (txsr & TX_COLLISION) { + /* + * Retrigger xmit. + */ + + if (el_debug > 6) + pr_debug("%s: retransmitting after a collision.\n", dev->name); + /* + * Poor little chip can't reset its own start + * pointer + */ + + outb(AX_SYS, AX_CMD); + outw(lp->tx_pkt_start, GP_LOW); + outb(AX_XMIT, AX_CMD); + dev->stats.collisions++; + spin_unlock(&lp->lock); + goto out; + } else { + /* + * It worked.. we will now fall through and receive + */ + dev->stats.tx_packets++; + if (el_debug > 6) + pr_debug("%s: Tx succeeded %s\n", dev->name, + (txsr & TX_RDY) ? "." : "but tx is busy!"); + /* + * This is safe the interrupt is atomic WRT itself. + */ + lp->txing = 0; + /* In case more to transmit */ + netif_wake_queue(dev); + } + } else { + /* + * In receive mode. + */ + + int rxsr = inb(RX_STATUS); + if (el_debug > 5) + pr_debug("%s: rxsr=%02x txsr=%02x rp=%04x\n", + dev->name, rxsr, inb(TX_STATUS), inw(RX_LOW)); + /* + * Just reading rx_status fixes most errors. + */ + if (rxsr & RX_MISSED) + dev->stats.rx_missed_errors++; + else if (rxsr & RX_RUNT) { + /* Handled to avoid board lock-up. */ + dev->stats.rx_length_errors++; + if (el_debug > 5) + pr_debug("%s: runt.\n", dev->name); + } else if (rxsr & RX_GOOD) { + /* + * Receive worked. + */ + el_receive(dev); + } else { + /* + * Nothing? Something is broken! + */ + if (el_debug > 2) + pr_debug("%s: No packet seen, rxsr=%02x **resetting 3c501***\n", + dev->name, rxsr); + el_reset(dev); + } + } + + /* + * Move into receive mode + */ + + outb(AX_RX, AX_CMD); + outw(0x00, RX_BUF_CLR); + inb(RX_STATUS); /* Be certain that interrupts are cleared. */ + inb(TX_STATUS); + spin_unlock(&lp->lock); +out: + return IRQ_HANDLED; +} + + +/** + * el_receive: + * @dev: Device to pull the packets from + * + * We have a good packet. Well, not really "good", just mostly not broken. + * We must check everything to see if it is good. In particular we occasionally + * get wild packet sizes from the card. If the packet seems sane we PIO it + * off the card and queue it for the protocol layers. + */ + +static void el_receive(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + int pkt_len; + struct sk_buff *skb; + + pkt_len = inw(RX_LOW); + + if (el_debug > 4) + pr_debug(" el_receive %d.\n", pkt_len); + + if (pkt_len < 60 || pkt_len > 1536) { + if (el_debug) + pr_debug("%s: bogus packet, length=%d\n", + dev->name, pkt_len); + dev->stats.rx_over_errors++; + return; + } + + /* + * Command mode so we can empty the buffer + */ + + outb(AX_SYS, AX_CMD); + skb = dev_alloc_skb(pkt_len+2); + + /* + * Start of frame + */ + + outw(0x00, GP_LOW); + if (skb == NULL) { + pr_info("%s: Memory squeeze, dropping packet.\n", dev->name); + dev->stats.rx_dropped++; + return; + } else { + skb_reserve(skb, 2); /* Force 16 byte alignment */ + /* + * The read increments through the bytes. The interrupt + * handler will fix the pointer when it returns to + * receive mode. + */ + insb(DATAPORT, skb_put(skb, pkt_len), pkt_len); + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; + } +} + +/** + * el_reset: Reset a 3c501 card + * @dev: The 3c501 card about to get zapped + * + * Even resetting a 3c501 isn't simple. When you activate reset it loses all + * its configuration. You must hold the lock when doing this. The function + * cannot take the lock itself as it is callable from the irq handler. + */ + +static void el_reset(struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + + if (el_debug > 2) + pr_info("3c501 reset...\n"); + outb(AX_RESET, AX_CMD); /* Reset the chip */ + /* Aux control, irq and loopback enabled */ + outb(AX_LOOP, AX_CMD); + { + int i; + for (i = 0; i < 6; i++) /* Set the station address. */ + outb(dev->dev_addr[i], ioaddr + i); + } + + outw(0, RX_BUF_CLR); /* Set rx packet area to 0. */ + outb(TX_NORM, TX_CMD); /* tx irq on done, collision */ + outb(RX_NORM, RX_CMD); /* Set Rx commands. */ + inb(RX_STATUS); /* Clear status. */ + inb(TX_STATUS); + lp->txing = 0; +} + +/** + * el1_close: + * @dev: 3c501 card to shut down + * + * Close a 3c501 card. The IFF_UP flag has been cleared by the user via + * the SIOCSIFFLAGS ioctl. We stop any further transmissions being queued, + * and then disable the interrupts. Finally we reset the chip. The effects + * of the rest will be cleaned up by #el1_open. Always returns 0 indicating + * a success. + */ + +static int el1_close(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + + if (el_debug > 2) + pr_info("%s: Shutting down Ethernet card at %#x.\n", + dev->name, ioaddr); + + netif_stop_queue(dev); + + /* + * Free and disable the IRQ. + */ + + free_irq(dev->irq, dev); + outb(AX_RESET, AX_CMD); /* Reset the chip */ + + return 0; +} + +/** + * set_multicast_list: + * @dev: The device to adjust + * + * Set or clear the multicast filter for this adaptor to use the best-effort + * filtering supported. The 3c501 supports only three modes of filtering. + * It always receives broadcasts and packets for itself. You can choose to + * optionally receive all packets, or all multicast packets on top of this. + */ + +static void set_multicast_list(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + + if (dev->flags & IFF_PROMISC) { + outb(RX_PROM, RX_CMD); + inb(RX_STATUS); + } else if (!netdev_mc_empty(dev) || dev->flags & IFF_ALLMULTI) { + /* Multicast or all multicast is the same */ + outb(RX_MULT, RX_CMD); + inb(RX_STATUS); /* Clear status. */ + } else { + outb(RX_NORM, RX_CMD); + inb(RX_STATUS); + } +} + + +static void netdev_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr); +} + +static u32 netdev_get_msglevel(struct net_device *dev) +{ + return debug; +} + +static void netdev_set_msglevel(struct net_device *dev, u32 level) +{ + debug = level; +} + +static const struct ethtool_ops netdev_ethtool_ops = { + .get_drvinfo = netdev_get_drvinfo, + .get_msglevel = netdev_get_msglevel, + .set_msglevel = netdev_set_msglevel, +}; + +#ifdef MODULE + +static struct net_device *dev_3c501; + +module_param(io, int, 0); +module_param(irq, int, 0); +MODULE_PARM_DESC(io, "EtherLink I/O base address"); +MODULE_PARM_DESC(irq, "EtherLink IRQ number"); + +/** + * init_module: + * + * When the driver is loaded as a module this function is called. We fake up + * a device structure with the base I/O and interrupt set as if it were being + * called from Space.c. This minimises the extra code that would otherwise + * be required. + * + * Returns 0 for success or -EIO if a card is not found. Returning an error + * here also causes the module to be unloaded + */ + +int __init init_module(void) +{ + dev_3c501 = el1_probe(-1); + if (IS_ERR(dev_3c501)) + return PTR_ERR(dev_3c501); + return 0; +} + +/** + * cleanup_module: + * + * The module is being unloaded. We unhook our network device from the system + * and then free up the resources we took when the card was found. + */ + +void __exit cleanup_module(void) +{ + struct net_device *dev = dev_3c501; + unregister_netdev(dev); + release_region(dev->base_addr, EL1_IO_EXTENT); + free_netdev(dev); +} + +#endif /* MODULE */ + +MODULE_AUTHOR("Donald Becker, Alan Cox"); +MODULE_DESCRIPTION("Support for the ancient 3Com 3c501 ethernet card"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/net/ethernet/3com/3c501.h b/drivers/net/ethernet/3com/3c501.h new file mode 100644 index 000000000000..183fd55f03cb --- /dev/null +++ b/drivers/net/ethernet/3com/3c501.h @@ -0,0 +1,91 @@ + +/* + * Index to functions. + */ + +static int el1_probe1(struct net_device *dev, int ioaddr); +static int el_open(struct net_device *dev); +static void el_timeout(struct net_device *dev); +static netdev_tx_t el_start_xmit(struct sk_buff *skb, struct net_device *dev); +static irqreturn_t el_interrupt(int irq, void *dev_id); +static void el_receive(struct net_device *dev); +static void el_reset(struct net_device *dev); +static int el1_close(struct net_device *dev); +static void set_multicast_list(struct net_device *dev); +static const struct ethtool_ops netdev_ethtool_ops; + +#define EL1_IO_EXTENT 16 + +#ifndef EL_DEBUG +#define EL_DEBUG 0 /* use 0 for production, 1 for devel., >2 for debug */ +#endif /* Anything above 5 is wordy death! */ +#define debug el_debug +static int el_debug = EL_DEBUG; + +/* + * Board-specific info in netdev_priv(dev). + */ + +struct net_local +{ + int tx_pkt_start; /* The length of the current Tx packet. */ + int collisions; /* Tx collisions this packet */ + int loading; /* Spot buffer load collisions */ + int txing; /* True if card is in TX mode */ + spinlock_t lock; /* Serializing lock */ +}; + + +#define RX_STATUS (ioaddr + 0x06) +#define RX_CMD RX_STATUS +#define TX_STATUS (ioaddr + 0x07) +#define TX_CMD TX_STATUS +#define GP_LOW (ioaddr + 0x08) +#define GP_HIGH (ioaddr + 0x09) +#define RX_BUF_CLR (ioaddr + 0x0A) +#define RX_LOW (ioaddr + 0x0A) +#define RX_HIGH (ioaddr + 0x0B) +#define SAPROM (ioaddr + 0x0C) +#define AX_STATUS (ioaddr + 0x0E) +#define AX_CMD AX_STATUS +#define DATAPORT (ioaddr + 0x0F) +#define TX_RDY 0x08 /* In TX_STATUS */ + +#define EL1_DATAPTR 0x08 +#define EL1_RXPTR 0x0A +#define EL1_SAPROM 0x0C +#define EL1_DATAPORT 0x0f + +/* + * Writes to the ax command register. + */ + +#define AX_OFF 0x00 /* Irq off, buffer access on */ +#define AX_SYS 0x40 /* Load the buffer */ +#define AX_XMIT 0x44 /* Transmit a packet */ +#define AX_RX 0x48 /* Receive a packet */ +#define AX_LOOP 0x0C /* Loopback mode */ +#define AX_RESET 0x80 + +/* + * Normal receive mode written to RX_STATUS. We must intr on short packets + * to avoid bogus rx lockups. + */ + +#define RX_NORM 0xA8 /* 0x68 == all addrs, 0xA8 only to me. */ +#define RX_PROM 0x68 /* Senior Prom, uhmm promiscuous mode. */ +#define RX_MULT 0xE8 /* Accept multicast packets. */ +#define TX_NORM 0x0A /* Interrupt on everything that might hang the chip */ + +/* + * TX_STATUS register. + */ + +#define TX_COLLISION 0x02 +#define TX_16COLLISIONS 0x04 +#define TX_READY 0x08 + +#define RX_RUNT 0x08 +#define RX_MISSED 0x01 /* Missed a packet due to 3c501 braindamage. */ +#define RX_GOOD 0x30 /* Good packet 0x20, or simple overflow 0x10. */ + diff --git a/drivers/net/ethernet/3com/3c509.c b/drivers/net/ethernet/3com/3c509.c new file mode 100644 index 000000000000..44b28b2d7003 --- /dev/null +++ b/drivers/net/ethernet/3com/3c509.c @@ -0,0 +1,1594 @@ +/* 3c509.c: A 3c509 EtherLink3 ethernet driver for linux. */ +/* + Written 1993-2000 by Donald Becker. + + Copyright 1994-2000 by Donald Becker. + Copyright 1993 United States Government as represented by the + Director, National Security Agency. This software may be used and + distributed according to the terms of the GNU General Public License, + incorporated herein by reference. + + This driver is for the 3Com EtherLinkIII series. + + The author may be reached as becker@scyld.com, or C/O + Scyld Computing Corporation + 410 Severn Ave., Suite 210 + Annapolis MD 21403 + + Known limitations: + Because of the way 3c509 ISA detection works it's difficult to predict + a priori which of several ISA-mode cards will be detected first. + + This driver does not use predictive interrupt mode, resulting in higher + packet latency but lower overhead. If interrupts are disabled for an + unusually long time it could also result in missed packets, but in + practice this rarely happens. + + + FIXES: + Alan Cox: Removed the 'Unexpected interrupt' bug. + Michael Meskes: Upgraded to Donald Becker's version 1.07. + Alan Cox: Increased the eeprom delay. Regardless of + what the docs say some people definitely + get problems with lower (but in card spec) + delays + v1.10 4/21/97 Fixed module code so that multiple cards may be detected, + other cleanups. -djb + Andrea Arcangeli: Upgraded to Donald Becker's version 1.12. + Rick Payne: Fixed SMP race condition + v1.13 9/8/97 Made 'max_interrupt_work' an insmod-settable variable -djb + v1.14 10/15/97 Avoided waiting..discard message for fast machines -djb + v1.15 1/31/98 Faster recovery for Tx errors. -djb + v1.16 2/3/98 Different ID port handling to avoid sound cards. -djb + v1.18 12Mar2001 Andrew Morton + - Avoid bogus detect of 3c590's (Andrzej Krzysztofowicz) + - Reviewed against 1.18 from scyld.com + v1.18a 17Nov2001 Jeff Garzik <jgarzik@pobox.com> + - ethtool support + v1.18b 1Mar2002 Zwane Mwaikambo <zwane@commfireservices.com> + - Power Management support + v1.18c 1Mar2002 David Ruggiero <jdr@farfalle.com> + - Full duplex support + v1.19 16Oct2002 Zwane Mwaikambo <zwane@linuxpower.ca> + - Additional ethtool features + v1.19a 28Oct2002 Davud Ruggiero <jdr@farfalle.com> + - Increase *read_eeprom udelay to workaround oops with 2 cards. + v1.19b 08Nov2002 Marc Zyngier <maz@wild-wind.fr.eu.org> + - Introduce driver model for EISA cards. + v1.20 04Feb2008 Ondrej Zary <linux@rainbow-software.org> + - convert to isa_driver and pnp_driver and some cleanups +*/ + +#define DRV_NAME "3c509" +#define DRV_VERSION "1.20" +#define DRV_RELDATE "04Feb2008" + +/* A few values that may be tweaked. */ + +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (400*HZ/1000) + +#include <linux/module.h> +#include <linux/mca.h> +#include <linux/isa.h> +#include <linux/pnp.h> +#include <linux/string.h> +#include <linux/interrupt.h> +#include <linux/errno.h> +#include <linux/in.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/pm.h> +#include <linux/skbuff.h> +#include <linux/delay.h> /* for udelay() */ +#include <linux/spinlock.h> +#include <linux/ethtool.h> +#include <linux/device.h> +#include <linux/eisa.h> +#include <linux/bitops.h> + +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/irq.h> + +static char version[] __devinitdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n"; + +#ifdef EL3_DEBUG +static int el3_debug = EL3_DEBUG; +#else +static int el3_debug = 2; +#endif + +/* Used to do a global count of all the cards in the system. Must be + * a global variable so that the mca/eisa probe routines can increment + * it */ +static int el3_cards = 0; +#define EL3_MAX_CARDS 8 + +/* To minimize the size of the driver source I only define operating + constants if they are used several times. You'll need the manual + anyway if you want to understand driver details. */ +/* Offsets from base I/O address. */ +#define EL3_DATA 0x00 +#define EL3_CMD 0x0e +#define EL3_STATUS 0x0e +#define EEPROM_READ 0x80 + +#define EL3_IO_EXTENT 16 + +#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD) + + +/* The top five bits written to EL3_CMD are a command, the lower + 11 bits are the parameter, if applicable. */ +enum c509cmd { + TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11, + RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, RxDiscard = 8<<11, + TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11, + FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11, + SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11, + SetTxThreshold = 18<<11, SetTxStart = 19<<11, StatsEnable = 21<<11, + StatsDisable = 22<<11, StopCoax = 23<<11, PowerUp = 27<<11, + PowerDown = 28<<11, PowerAuto = 29<<11}; + +enum c509status { + IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004, + TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020, + IntReq = 0x0040, StatsFull = 0x0080, CmdBusy = 0x1000, }; + +/* The SetRxFilter command accepts the following classes: */ +enum RxFilter { + RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 }; + +/* Register window 1 offsets, the window used in normal operation. */ +#define TX_FIFO 0x00 +#define RX_FIFO 0x00 +#define RX_STATUS 0x08 +#define TX_STATUS 0x0B +#define TX_FREE 0x0C /* Remaining free bytes in Tx buffer. */ + +#define WN0_CONF_CTRL 0x04 /* Window 0: Configuration control register */ +#define WN0_ADDR_CONF 0x06 /* Window 0: Address configuration register */ +#define WN0_IRQ 0x08 /* Window 0: Set IRQ line in bits 12-15. */ +#define WN4_MEDIA 0x0A /* Window 4: Various transcvr/media bits. */ +#define MEDIA_TP 0x00C0 /* Enable link beat and jabber for 10baseT. */ +#define WN4_NETDIAG 0x06 /* Window 4: Net diagnostic */ +#define FD_ENABLE 0x8000 /* Enable full-duplex ("external loopback") */ + +/* + * Must be a power of two (we use a binary and in the + * circular queue) + */ +#define SKB_QUEUE_SIZE 64 + +enum el3_cardtype { EL3_ISA, EL3_PNP, EL3_MCA, EL3_EISA }; + +struct el3_private { + spinlock_t lock; + /* skb send-queue */ + int head, size; + struct sk_buff *queue[SKB_QUEUE_SIZE]; + enum el3_cardtype type; +}; +static int id_port; +static int current_tag; +static struct net_device *el3_devs[EL3_MAX_CARDS]; + +/* Parameters that may be passed into the module. */ +static int debug = -1; +static int irq[] = {-1, -1, -1, -1, -1, -1, -1, -1}; +/* Maximum events (Rx packets, etc.) to handle at each interrupt. */ +static int max_interrupt_work = 10; +#ifdef CONFIG_PNP +static int nopnp; +#endif + +static int __devinit el3_common_init(struct net_device *dev); +static void el3_common_remove(struct net_device *dev); +static ushort id_read_eeprom(int index); +static ushort read_eeprom(int ioaddr, int index); +static int el3_open(struct net_device *dev); +static netdev_tx_t el3_start_xmit(struct sk_buff *skb, struct net_device *dev); +static irqreturn_t el3_interrupt(int irq, void *dev_id); +static void update_stats(struct net_device *dev); +static struct net_device_stats *el3_get_stats(struct net_device *dev); +static int el3_rx(struct net_device *dev); +static int el3_close(struct net_device *dev); +static void set_multicast_list(struct net_device *dev); +static void el3_tx_timeout (struct net_device *dev); +static void el3_down(struct net_device *dev); +static void el3_up(struct net_device *dev); +static const struct ethtool_ops ethtool_ops; +#ifdef CONFIG_PM +static int el3_suspend(struct device *, pm_message_t); +static int el3_resume(struct device *); +#else +#define el3_suspend NULL +#define el3_resume NULL +#endif + + +/* generic device remove for all device types */ +static int el3_device_remove (struct device *device); +#ifdef CONFIG_NET_POLL_CONTROLLER +static void el3_poll_controller(struct net_device *dev); +#endif + +/* Return 0 on success, 1 on error, 2 when found already detected PnP card */ +static int el3_isa_id_sequence(__be16 *phys_addr) +{ + short lrs_state = 0xff; + int i; + + /* ISA boards are detected by sending the ID sequence to the + ID_PORT. We find cards past the first by setting the 'current_tag' + on cards as they are found. Cards with their tag set will not + respond to subsequent ID sequences. */ + + outb(0x00, id_port); + outb(0x00, id_port); + for (i = 0; i < 255; i++) { + outb(lrs_state, id_port); + lrs_state <<= 1; + lrs_state = lrs_state & 0x100 ? lrs_state ^ 0xcf : lrs_state; + } + /* For the first probe, clear all board's tag registers. */ + if (current_tag == 0) + outb(0xd0, id_port); + else /* Otherwise kill off already-found boards. */ + outb(0xd8, id_port); + if (id_read_eeprom(7) != 0x6d50) + return 1; + /* Read in EEPROM data, which does contention-select. + Only the lowest address board will stay "on-line". + 3Com got the byte order backwards. */ + for (i = 0; i < 3; i++) + phys_addr[i] = htons(id_read_eeprom(i)); +#ifdef CONFIG_PNP + if (!nopnp) { + /* The ISA PnP 3c509 cards respond to the ID sequence too. + This check is needed in order not to register them twice. */ + for (i = 0; i < el3_cards; i++) { + struct el3_private *lp = netdev_priv(el3_devs[i]); + if (lp->type == EL3_PNP && + !memcmp(phys_addr, el3_devs[i]->dev_addr, + ETH_ALEN)) { + if (el3_debug > 3) + pr_debug("3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n", + phys_addr[0] & 0xff, phys_addr[0] >> 8, + phys_addr[1] & 0xff, phys_addr[1] >> 8, + phys_addr[2] & 0xff, phys_addr[2] >> 8); + /* Set the adaptor tag so that the next card can be found. */ + outb(0xd0 + ++current_tag, id_port); + return 2; + } + } + } +#endif /* CONFIG_PNP */ + return 0; + +} + +static void __devinit el3_dev_fill(struct net_device *dev, __be16 *phys_addr, + int ioaddr, int irq, int if_port, + enum el3_cardtype type) +{ + struct el3_private *lp = netdev_priv(dev); + + memcpy(dev->dev_addr, phys_addr, ETH_ALEN); + dev->base_addr = ioaddr; + dev->irq = irq; + dev->if_port = if_port; + lp->type = type; +} + +static int __devinit el3_isa_match(struct device *pdev, + unsigned int ndev) +{ + struct net_device *dev; + int ioaddr, isa_irq, if_port, err; + unsigned int iobase; + __be16 phys_addr[3]; + + while ((err = el3_isa_id_sequence(phys_addr)) == 2) + ; /* Skip to next card when PnP card found */ + if (err == 1) + return 0; + + iobase = id_read_eeprom(8); + if_port = iobase >> 14; + ioaddr = 0x200 + ((iobase & 0x1f) << 4); + if (irq[el3_cards] > 1 && irq[el3_cards] < 16) + isa_irq = irq[el3_cards]; + else + isa_irq = id_read_eeprom(9) >> 12; + + dev = alloc_etherdev(sizeof(struct el3_private)); + if (!dev) + return -ENOMEM; + + netdev_boot_setup_check(dev); + + if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509-isa")) { + free_netdev(dev); + return 0; + } + + /* Set the adaptor tag so that the next card can be found. */ + outb(0xd0 + ++current_tag, id_port); + + /* Activate the adaptor at the EEPROM location. */ + outb((ioaddr >> 4) | 0xe0, id_port); + + EL3WINDOW(0); + if (inw(ioaddr) != 0x6d50) { + free_netdev(dev); + return 0; + } + + /* Free the interrupt so that some other card can use it. */ + outw(0x0f00, ioaddr + WN0_IRQ); + + el3_dev_fill(dev, phys_addr, ioaddr, isa_irq, if_port, EL3_ISA); + dev_set_drvdata(pdev, dev); + if (el3_common_init(dev)) { + free_netdev(dev); + return 0; + } + + el3_devs[el3_cards++] = dev; + return 1; +} + +static int __devexit el3_isa_remove(struct device *pdev, + unsigned int ndev) +{ + el3_device_remove(pdev); + dev_set_drvdata(pdev, NULL); + return 0; +} + +#ifdef CONFIG_PM +static int el3_isa_suspend(struct device *dev, unsigned int n, + pm_message_t state) +{ + current_tag = 0; + return el3_suspend(dev, state); +} + +static int el3_isa_resume(struct device *dev, unsigned int n) +{ + struct net_device *ndev = dev_get_drvdata(dev); + int ioaddr = ndev->base_addr, err; + __be16 phys_addr[3]; + + while ((err = el3_isa_id_sequence(phys_addr)) == 2) + ; /* Skip to next card when PnP card found */ + if (err == 1) + return 0; + /* Set the adaptor tag so that the next card can be found. */ + outb(0xd0 + ++current_tag, id_port); + /* Enable the card */ + outb((ioaddr >> 4) | 0xe0, id_port); + EL3WINDOW(0); + if (inw(ioaddr) != 0x6d50) + return 1; + /* Free the interrupt so that some other card can use it. */ + outw(0x0f00, ioaddr + WN0_IRQ); + return el3_resume(dev); +} +#endif + +static struct isa_driver el3_isa_driver = { + .match = el3_isa_match, + .remove = __devexit_p(el3_isa_remove), +#ifdef CONFIG_PM + .suspend = el3_isa_suspend, + .resume = el3_isa_resume, +#endif + .driver = { + .name = "3c509" + }, +}; +static int isa_registered; + +#ifdef CONFIG_PNP +static struct pnp_device_id el3_pnp_ids[] = { + { .id = "TCM5090" }, /* 3Com Etherlink III (TP) */ + { .id = "TCM5091" }, /* 3Com Etherlink III */ + { .id = "TCM5094" }, /* 3Com Etherlink III (combo) */ + { .id = "TCM5095" }, /* 3Com Etherlink III (TPO) */ + { .id = "TCM5098" }, /* 3Com Etherlink III (TPC) */ + { .id = "PNP80f7" }, /* 3Com Etherlink III compatible */ + { .id = "PNP80f8" }, /* 3Com Etherlink III compatible */ + { .id = "" } +}; +MODULE_DEVICE_TABLE(pnp, el3_pnp_ids); + +static int __devinit el3_pnp_probe(struct pnp_dev *pdev, + const struct pnp_device_id *id) +{ + short i; + int ioaddr, irq, if_port; + __be16 phys_addr[3]; + struct net_device *dev = NULL; + int err; + + ioaddr = pnp_port_start(pdev, 0); + if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509-pnp")) + return -EBUSY; + irq = pnp_irq(pdev, 0); + EL3WINDOW(0); + for (i = 0; i < 3; i++) + phys_addr[i] = htons(read_eeprom(ioaddr, i)); + if_port = read_eeprom(ioaddr, 8) >> 14; + dev = alloc_etherdev(sizeof(struct el3_private)); + if (!dev) { + release_region(ioaddr, EL3_IO_EXTENT); + return -ENOMEM; + } + SET_NETDEV_DEV(dev, &pdev->dev); + netdev_boot_setup_check(dev); + + el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_PNP); + pnp_set_drvdata(pdev, dev); + err = el3_common_init(dev); + + if (err) { + pnp_set_drvdata(pdev, NULL); + free_netdev(dev); + return err; + } + + el3_devs[el3_cards++] = dev; + return 0; +} + +static void __devexit el3_pnp_remove(struct pnp_dev *pdev) +{ + el3_common_remove(pnp_get_drvdata(pdev)); + pnp_set_drvdata(pdev, NULL); +} + +#ifdef CONFIG_PM +static int el3_pnp_suspend(struct pnp_dev *pdev, pm_message_t state) +{ + return el3_suspend(&pdev->dev, state); +} + +static int el3_pnp_resume(struct pnp_dev *pdev) +{ + return el3_resume(&pdev->dev); +} +#endif + +static struct pnp_driver el3_pnp_driver = { + .name = "3c509", + .id_table = el3_pnp_ids, + .probe = el3_pnp_probe, + .remove = __devexit_p(el3_pnp_remove), +#ifdef CONFIG_PM + .suspend = el3_pnp_suspend, + .resume = el3_pnp_resume, +#endif +}; +static int pnp_registered; +#endif /* CONFIG_PNP */ + +#ifdef CONFIG_EISA +static struct eisa_device_id el3_eisa_ids[] = { + { "TCM5090" }, + { "TCM5091" }, + { "TCM5092" }, + { "TCM5093" }, + { "TCM5094" }, + { "TCM5095" }, + { "TCM5098" }, + { "" } +}; +MODULE_DEVICE_TABLE(eisa, el3_eisa_ids); + +static int el3_eisa_probe (struct device *device); + +static struct eisa_driver el3_eisa_driver = { + .id_table = el3_eisa_ids, + .driver = { + .name = "3c579", + .probe = el3_eisa_probe, + .remove = __devexit_p (el3_device_remove), + .suspend = el3_suspend, + .resume = el3_resume, + } +}; +static int eisa_registered; +#endif + +#ifdef CONFIG_MCA +static int el3_mca_probe(struct device *dev); + +static short el3_mca_adapter_ids[] __initdata = { + 0x627c, + 0x627d, + 0x62db, + 0x62f6, + 0x62f7, + 0x0000 +}; + +static char *el3_mca_adapter_names[] __initdata = { + "3Com 3c529 EtherLink III (10base2)", + "3Com 3c529 EtherLink III (10baseT)", + "3Com 3c529 EtherLink III (test mode)", + "3Com 3c529 EtherLink III (TP or coax)", + "3Com 3c529 EtherLink III (TP)", + NULL +}; + +static struct mca_driver el3_mca_driver = { + .id_table = el3_mca_adapter_ids, + .driver = { + .name = "3c529", + .bus = &mca_bus_type, + .probe = el3_mca_probe, + .remove = __devexit_p(el3_device_remove), + .suspend = el3_suspend, + .resume = el3_resume, + }, +}; +static int mca_registered; +#endif /* CONFIG_MCA */ + +static const struct net_device_ops netdev_ops = { + .ndo_open = el3_open, + .ndo_stop = el3_close, + .ndo_start_xmit = el3_start_xmit, + .ndo_get_stats = el3_get_stats, + .ndo_set_multicast_list = set_multicast_list, + .ndo_tx_timeout = el3_tx_timeout, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = el3_poll_controller, +#endif +}; + +static int __devinit el3_common_init(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + int err; + const char *if_names[] = {"10baseT", "AUI", "undefined", "BNC"}; + + spin_lock_init(&lp->lock); + + if (dev->mem_start & 0x05) { /* xcvr codes 1/3/4/12 */ + dev->if_port = (dev->mem_start & 0x0f); + } else { /* xcvr codes 0/8 */ + /* use eeprom value, but save user's full-duplex selection */ + dev->if_port |= (dev->mem_start & 0x08); + } + + /* The EL3-specific entries in the device structure. */ + dev->netdev_ops = &netdev_ops; + dev->watchdog_timeo = TX_TIMEOUT; + SET_ETHTOOL_OPS(dev, ðtool_ops); + + err = register_netdev(dev); + if (err) { + pr_err("Failed to register 3c5x9 at %#3.3lx, IRQ %d.\n", + dev->base_addr, dev->irq); + release_region(dev->base_addr, EL3_IO_EXTENT); + return err; + } + + pr_info("%s: 3c5x9 found at %#3.3lx, %s port, address %pM, IRQ %d.\n", + dev->name, dev->base_addr, if_names[(dev->if_port & 0x03)], + dev->dev_addr, dev->irq); + + if (el3_debug > 0) + pr_info("%s", version); + return 0; + +} + +static void el3_common_remove (struct net_device *dev) +{ + unregister_netdev (dev); + release_region(dev->base_addr, EL3_IO_EXTENT); + free_netdev (dev); +} + +#ifdef CONFIG_MCA +static int __init el3_mca_probe(struct device *device) +{ + /* Based on Erik Nygren's (nygren@mit.edu) 3c529 patch, + * heavily modified by Chris Beauregard + * (cpbeaure@csclub.uwaterloo.ca) to support standard MCA + * probing. + * + * redone for multi-card detection by ZP Gu (zpg@castle.net) + * now works as a module */ + + short i; + int ioaddr, irq, if_port; + __be16 phys_addr[3]; + struct net_device *dev = NULL; + u_char pos4, pos5; + struct mca_device *mdev = to_mca_device(device); + int slot = mdev->slot; + int err; + + pos4 = mca_device_read_stored_pos(mdev, 4); + pos5 = mca_device_read_stored_pos(mdev, 5); + + ioaddr = ((short)((pos4&0xfc)|0x02)) << 8; + irq = pos5 & 0x0f; + + + pr_info("3c529: found %s at slot %d\n", + el3_mca_adapter_names[mdev->index], slot + 1); + + /* claim the slot */ + strncpy(mdev->name, el3_mca_adapter_names[mdev->index], + sizeof(mdev->name)); + mca_device_set_claim(mdev, 1); + + if_port = pos4 & 0x03; + + irq = mca_device_transform_irq(mdev, irq); + ioaddr = mca_device_transform_ioport(mdev, ioaddr); + if (el3_debug > 2) { + pr_debug("3c529: irq %d ioaddr 0x%x ifport %d\n", irq, ioaddr, if_port); + } + EL3WINDOW(0); + for (i = 0; i < 3; i++) + phys_addr[i] = htons(read_eeprom(ioaddr, i)); + + dev = alloc_etherdev(sizeof (struct el3_private)); + if (dev == NULL) { + release_region(ioaddr, EL3_IO_EXTENT); + return -ENOMEM; + } + + netdev_boot_setup_check(dev); + + el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_MCA); + dev_set_drvdata(device, dev); + err = el3_common_init(dev); + + if (err) { + dev_set_drvdata(device, NULL); + free_netdev(dev); + return -ENOMEM; + } + + el3_devs[el3_cards++] = dev; + return 0; +} + +#endif /* CONFIG_MCA */ + +#ifdef CONFIG_EISA +static int __init el3_eisa_probe (struct device *device) +{ + short i; + int ioaddr, irq, if_port; + __be16 phys_addr[3]; + struct net_device *dev = NULL; + struct eisa_device *edev; + int err; + + /* Yeepee, The driver framework is calling us ! */ + edev = to_eisa_device (device); + ioaddr = edev->base_addr; + + if (!request_region(ioaddr, EL3_IO_EXTENT, "3c579-eisa")) + return -EBUSY; + + /* Change the register set to the configuration window 0. */ + outw(SelectWindow | 0, ioaddr + 0xC80 + EL3_CMD); + + irq = inw(ioaddr + WN0_IRQ) >> 12; + if_port = inw(ioaddr + 6)>>14; + for (i = 0; i < 3; i++) + phys_addr[i] = htons(read_eeprom(ioaddr, i)); + + /* Restore the "Product ID" to the EEPROM read register. */ + read_eeprom(ioaddr, 3); + + dev = alloc_etherdev(sizeof (struct el3_private)); + if (dev == NULL) { + release_region(ioaddr, EL3_IO_EXTENT); + return -ENOMEM; + } + + netdev_boot_setup_check(dev); + + el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_EISA); + eisa_set_drvdata (edev, dev); + err = el3_common_init(dev); + + if (err) { + eisa_set_drvdata (edev, NULL); + free_netdev(dev); + return err; + } + + el3_devs[el3_cards++] = dev; + return 0; +} +#endif + +/* This remove works for all device types. + * + * The net dev must be stored in the driver data field */ +static int __devexit el3_device_remove (struct device *device) +{ + struct net_device *dev; + + dev = dev_get_drvdata(device); + + el3_common_remove (dev); + return 0; +} + +/* Read a word from the EEPROM using the regular EEPROM access register. + Assume that we are in register window zero. + */ +static ushort read_eeprom(int ioaddr, int index) +{ + outw(EEPROM_READ + index, ioaddr + 10); + /* Pause for at least 162 us. for the read to take place. + Some chips seem to require much longer */ + mdelay(2); + return inw(ioaddr + 12); +} + +/* Read a word from the EEPROM when in the ISA ID probe state. */ +static ushort id_read_eeprom(int index) +{ + int bit, word = 0; + + /* Issue read command, and pause for at least 162 us. for it to complete. + Assume extra-fast 16Mhz bus. */ + outb(EEPROM_READ + index, id_port); + + /* Pause for at least 162 us. for the read to take place. */ + /* Some chips seem to require much longer */ + mdelay(4); + + for (bit = 15; bit >= 0; bit--) + word = (word << 1) + (inb(id_port) & 0x01); + + if (el3_debug > 3) + pr_debug(" 3c509 EEPROM word %d %#4.4x.\n", index, word); + + return word; +} + + +static int +el3_open(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + int i; + + outw(TxReset, ioaddr + EL3_CMD); + outw(RxReset, ioaddr + EL3_CMD); + outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD); + + i = request_irq(dev->irq, el3_interrupt, 0, dev->name, dev); + if (i) + return i; + + EL3WINDOW(0); + if (el3_debug > 3) + pr_debug("%s: Opening, IRQ %d status@%x %4.4x.\n", dev->name, + dev->irq, ioaddr + EL3_STATUS, inw(ioaddr + EL3_STATUS)); + + el3_up(dev); + + if (el3_debug > 3) + pr_debug("%s: Opened 3c509 IRQ %d status %4.4x.\n", + dev->name, dev->irq, inw(ioaddr + EL3_STATUS)); + + return 0; +} + +static void +el3_tx_timeout (struct net_device *dev) +{ + int ioaddr = dev->base_addr; + + /* Transmitter timeout, serious problems. */ + pr_warning("%s: transmit timed out, Tx_status %2.2x status %4.4x Tx FIFO room %d.\n", + dev->name, inb(ioaddr + TX_STATUS), inw(ioaddr + EL3_STATUS), + inw(ioaddr + TX_FREE)); + dev->stats.tx_errors++; + dev->trans_start = jiffies; /* prevent tx timeout */ + /* Issue TX_RESET and TX_START commands. */ + outw(TxReset, ioaddr + EL3_CMD); + outw(TxEnable, ioaddr + EL3_CMD); + netif_wake_queue(dev); +} + + +static netdev_tx_t +el3_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + unsigned long flags; + + netif_stop_queue (dev); + + dev->stats.tx_bytes += skb->len; + + if (el3_debug > 4) { + pr_debug("%s: el3_start_xmit(length = %u) called, status %4.4x.\n", + dev->name, skb->len, inw(ioaddr + EL3_STATUS)); + } +#if 0 +#ifndef final_version + { /* Error-checking code, delete someday. */ + ushort status = inw(ioaddr + EL3_STATUS); + if (status & 0x0001 && /* IRQ line active, missed one. */ + inw(ioaddr + EL3_STATUS) & 1) { /* Make sure. */ + pr_debug("%s: Missed interrupt, status then %04x now %04x" + " Tx %2.2x Rx %4.4x.\n", dev->name, status, + inw(ioaddr + EL3_STATUS), inb(ioaddr + TX_STATUS), + inw(ioaddr + RX_STATUS)); + /* Fake interrupt trigger by masking, acknowledge interrupts. */ + outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD); + outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq, + ioaddr + EL3_CMD); + outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD); + } + } +#endif +#endif + /* + * We lock the driver against other processors. Note + * we don't need to lock versus the IRQ as we suspended + * that. This means that we lose the ability to take + * an RX during a TX upload. That sucks a bit with SMP + * on an original 3c509 (2K buffer) + * + * Using disable_irq stops us crapping on other + * time sensitive devices. + */ + + spin_lock_irqsave(&lp->lock, flags); + + /* Put out the doubleword header... */ + outw(skb->len, ioaddr + TX_FIFO); + outw(0x00, ioaddr + TX_FIFO); + /* ... and the packet rounded to a doubleword. */ + outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2); + + if (inw(ioaddr + TX_FREE) > 1536) + netif_start_queue(dev); + else + /* Interrupt us when the FIFO has room for max-sized packet. */ + outw(SetTxThreshold + 1536, ioaddr + EL3_CMD); + + spin_unlock_irqrestore(&lp->lock, flags); + + dev_kfree_skb (skb); + + /* Clear the Tx status stack. */ + { + short tx_status; + int i = 4; + + while (--i > 0 && (tx_status = inb(ioaddr + TX_STATUS)) > 0) { + if (tx_status & 0x38) dev->stats.tx_aborted_errors++; + if (tx_status & 0x30) outw(TxReset, ioaddr + EL3_CMD); + if (tx_status & 0x3C) outw(TxEnable, ioaddr + EL3_CMD); + outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */ + } + } + return NETDEV_TX_OK; +} + +/* The EL3 interrupt handler. */ +static irqreturn_t +el3_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct el3_private *lp; + int ioaddr, status; + int i = max_interrupt_work; + + lp = netdev_priv(dev); + spin_lock(&lp->lock); + + ioaddr = dev->base_addr; + + if (el3_debug > 4) { + status = inw(ioaddr + EL3_STATUS); + pr_debug("%s: interrupt, status %4.4x.\n", dev->name, status); + } + + while ((status = inw(ioaddr + EL3_STATUS)) & + (IntLatch | RxComplete | StatsFull)) { + + if (status & RxComplete) + el3_rx(dev); + + if (status & TxAvailable) { + if (el3_debug > 5) + pr_debug(" TX room bit was handled.\n"); + /* There's room in the FIFO for a full-sized packet. */ + outw(AckIntr | TxAvailable, ioaddr + EL3_CMD); + netif_wake_queue (dev); + } + if (status & (AdapterFailure | RxEarly | StatsFull | TxComplete)) { + /* Handle all uncommon interrupts. */ + if (status & StatsFull) /* Empty statistics. */ + update_stats(dev); + if (status & RxEarly) { /* Rx early is unused. */ + el3_rx(dev); + outw(AckIntr | RxEarly, ioaddr + EL3_CMD); + } + if (status & TxComplete) { /* Really Tx error. */ + short tx_status; + int i = 4; + + while (--i>0 && (tx_status = inb(ioaddr + TX_STATUS)) > 0) { + if (tx_status & 0x38) dev->stats.tx_aborted_errors++; + if (tx_status & 0x30) outw(TxReset, ioaddr + EL3_CMD); + if (tx_status & 0x3C) outw(TxEnable, ioaddr + EL3_CMD); + outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */ + } + } + if (status & AdapterFailure) { + /* Adapter failure requires Rx reset and reinit. */ + outw(RxReset, ioaddr + EL3_CMD); + /* Set the Rx filter to the current state. */ + outw(SetRxFilter | RxStation | RxBroadcast + | (dev->flags & IFF_ALLMULTI ? RxMulticast : 0) + | (dev->flags & IFF_PROMISC ? RxProm : 0), + ioaddr + EL3_CMD); + outw(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */ + outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD); + } + } + + if (--i < 0) { + pr_err("%s: Infinite loop in interrupt, status %4.4x.\n", + dev->name, status); + /* Clear all interrupts. */ + outw(AckIntr | 0xFF, ioaddr + EL3_CMD); + break; + } + /* Acknowledge the IRQ. */ + outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); /* Ack IRQ */ + } + + if (el3_debug > 4) { + pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name, + inw(ioaddr + EL3_STATUS)); + } + spin_unlock(&lp->lock); + return IRQ_HANDLED; +} + + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling receive - used by netconsole and other diagnostic tools + * to allow network i/o with interrupts disabled. + */ +static void el3_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + el3_interrupt(dev->irq, dev); + enable_irq(dev->irq); +} +#endif + +static struct net_device_stats * +el3_get_stats(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + unsigned long flags; + + /* + * This is fast enough not to bother with disable IRQ + * stuff. + */ + + spin_lock_irqsave(&lp->lock, flags); + update_stats(dev); + spin_unlock_irqrestore(&lp->lock, flags); + return &dev->stats; +} + +/* Update statistics. We change to register window 6, so this should be run + single-threaded if the device is active. This is expected to be a rare + operation, and it's simpler for the rest of the driver to assume that + window 1 is always valid rather than use a special window-state variable. + */ +static void update_stats(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + + if (el3_debug > 5) + pr_debug(" Updating the statistics.\n"); + /* Turn off statistics updates while reading. */ + outw(StatsDisable, ioaddr + EL3_CMD); + /* Switch to the stats window, and read everything. */ + EL3WINDOW(6); + dev->stats.tx_carrier_errors += inb(ioaddr + 0); + dev->stats.tx_heartbeat_errors += inb(ioaddr + 1); + /* Multiple collisions. */ inb(ioaddr + 2); + dev->stats.collisions += inb(ioaddr + 3); + dev->stats.tx_window_errors += inb(ioaddr + 4); + dev->stats.rx_fifo_errors += inb(ioaddr + 5); + dev->stats.tx_packets += inb(ioaddr + 6); + /* Rx packets */ inb(ioaddr + 7); + /* Tx deferrals */ inb(ioaddr + 8); + inw(ioaddr + 10); /* Total Rx and Tx octets. */ + inw(ioaddr + 12); + + /* Back to window 1, and turn statistics back on. */ + EL3WINDOW(1); + outw(StatsEnable, ioaddr + EL3_CMD); +} + +static int +el3_rx(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + short rx_status; + + if (el3_debug > 5) + pr_debug(" In rx_packet(), status %4.4x, rx_status %4.4x.\n", + inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS)); + while ((rx_status = inw(ioaddr + RX_STATUS)) > 0) { + if (rx_status & 0x4000) { /* Error, update stats. */ + short error = rx_status & 0x3800; + + outw(RxDiscard, ioaddr + EL3_CMD); + dev->stats.rx_errors++; + switch (error) { + case 0x0000: dev->stats.rx_over_errors++; break; + case 0x0800: dev->stats.rx_length_errors++; break; + case 0x1000: dev->stats.rx_frame_errors++; break; + case 0x1800: dev->stats.rx_length_errors++; break; + case 0x2000: dev->stats.rx_frame_errors++; break; + case 0x2800: dev->stats.rx_crc_errors++; break; + } + } else { + short pkt_len = rx_status & 0x7ff; + struct sk_buff *skb; + + skb = dev_alloc_skb(pkt_len+5); + if (el3_debug > 4) + pr_debug("Receiving packet size %d status %4.4x.\n", + pkt_len, rx_status); + if (skb != NULL) { + skb_reserve(skb, 2); /* Align IP on 16 byte */ + + /* 'skb->data' points to the start of sk_buff data area. */ + insl(ioaddr + RX_FIFO, skb_put(skb,pkt_len), + (pkt_len + 3) >> 2); + + outw(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */ + skb->protocol = eth_type_trans(skb,dev); + netif_rx(skb); + dev->stats.rx_bytes += pkt_len; + dev->stats.rx_packets++; + continue; + } + outw(RxDiscard, ioaddr + EL3_CMD); + dev->stats.rx_dropped++; + if (el3_debug) + pr_debug("%s: Couldn't allocate a sk_buff of size %d.\n", + dev->name, pkt_len); + } + inw(ioaddr + EL3_STATUS); /* Delay. */ + while (inw(ioaddr + EL3_STATUS) & 0x1000) + pr_debug(" Waiting for 3c509 to discard packet, status %x.\n", + inw(ioaddr + EL3_STATUS) ); + } + + return 0; +} + +/* + * Set or clear the multicast filter for this adaptor. + */ +static void +set_multicast_list(struct net_device *dev) +{ + unsigned long flags; + struct el3_private *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + int mc_count = netdev_mc_count(dev); + + if (el3_debug > 1) { + static int old; + if (old != mc_count) { + old = mc_count; + pr_debug("%s: Setting Rx mode to %d addresses.\n", + dev->name, mc_count); + } + } + spin_lock_irqsave(&lp->lock, flags); + if (dev->flags&IFF_PROMISC) { + outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm, + ioaddr + EL3_CMD); + } + else if (mc_count || (dev->flags&IFF_ALLMULTI)) { + outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast, ioaddr + EL3_CMD); + } + else + outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD); + spin_unlock_irqrestore(&lp->lock, flags); +} + +static int +el3_close(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + struct el3_private *lp = netdev_priv(dev); + + if (el3_debug > 2) + pr_debug("%s: Shutting down ethercard.\n", dev->name); + + el3_down(dev); + + free_irq(dev->irq, dev); + /* Switching back to window 0 disables the IRQ. */ + EL3WINDOW(0); + if (lp->type != EL3_EISA) { + /* But we explicitly zero the IRQ line select anyway. Don't do + * it on EISA cards, it prevents the module from getting an + * IRQ after unload+reload... */ + outw(0x0f00, ioaddr + WN0_IRQ); + } + + return 0; +} + +static int +el3_link_ok(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + u16 tmp; + + EL3WINDOW(4); + tmp = inw(ioaddr + WN4_MEDIA); + EL3WINDOW(1); + return tmp & (1<<11); +} + +static int +el3_netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + u16 tmp; + int ioaddr = dev->base_addr; + + EL3WINDOW(0); + /* obtain current transceiver via WN4_MEDIA? */ + tmp = inw(ioaddr + WN0_ADDR_CONF); + ecmd->transceiver = XCVR_INTERNAL; + switch (tmp >> 14) { + case 0: + ecmd->port = PORT_TP; + break; + case 1: + ecmd->port = PORT_AUI; + ecmd->transceiver = XCVR_EXTERNAL; + break; + case 3: + ecmd->port = PORT_BNC; + default: + break; + } + + ecmd->duplex = DUPLEX_HALF; + ecmd->supported = 0; + tmp = inw(ioaddr + WN0_CONF_CTRL); + if (tmp & (1<<13)) + ecmd->supported |= SUPPORTED_AUI; + if (tmp & (1<<12)) + ecmd->supported |= SUPPORTED_BNC; + if (tmp & (1<<9)) { + ecmd->supported |= SUPPORTED_TP | SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full; /* hmm... */ + EL3WINDOW(4); + tmp = inw(ioaddr + WN4_NETDIAG); + if (tmp & FD_ENABLE) + ecmd->duplex = DUPLEX_FULL; + } + + ethtool_cmd_speed_set(ecmd, SPEED_10); + EL3WINDOW(1); + return 0; +} + +static int +el3_netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + u16 tmp; + int ioaddr = dev->base_addr; + + if (ecmd->speed != SPEED_10) + return -EINVAL; + if ((ecmd->duplex != DUPLEX_HALF) && (ecmd->duplex != DUPLEX_FULL)) + return -EINVAL; + if ((ecmd->transceiver != XCVR_INTERNAL) && (ecmd->transceiver != XCVR_EXTERNAL)) + return -EINVAL; + + /* change XCVR type */ + EL3WINDOW(0); + tmp = inw(ioaddr + WN0_ADDR_CONF); + switch (ecmd->port) { + case PORT_TP: + tmp &= ~(3<<14); + dev->if_port = 0; + break; + case PORT_AUI: + tmp |= (1<<14); + dev->if_port = 1; + break; + case PORT_BNC: + tmp |= (3<<14); + dev->if_port = 3; + break; + default: + return -EINVAL; + } + + outw(tmp, ioaddr + WN0_ADDR_CONF); + if (dev->if_port == 3) { + /* fire up the DC-DC convertor if BNC gets enabled */ + tmp = inw(ioaddr + WN0_ADDR_CONF); + if (tmp & (3 << 14)) { + outw(StartCoax, ioaddr + EL3_CMD); + udelay(800); + } else + return -EIO; + } + + EL3WINDOW(4); + tmp = inw(ioaddr + WN4_NETDIAG); + if (ecmd->duplex == DUPLEX_FULL) + tmp |= FD_ENABLE; + else + tmp &= ~FD_ENABLE; + outw(tmp, ioaddr + WN4_NETDIAG); + EL3WINDOW(1); + + return 0; +} + +static void el3_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); +} + +static int el3_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct el3_private *lp = netdev_priv(dev); + int ret; + + spin_lock_irq(&lp->lock); + ret = el3_netdev_get_ecmd(dev, ecmd); + spin_unlock_irq(&lp->lock); + return ret; +} + +static int el3_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct el3_private *lp = netdev_priv(dev); + int ret; + + spin_lock_irq(&lp->lock); + ret = el3_netdev_set_ecmd(dev, ecmd); + spin_unlock_irq(&lp->lock); + return ret; +} + +static u32 el3_get_link(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + u32 ret; + + spin_lock_irq(&lp->lock); + ret = el3_link_ok(dev); + spin_unlock_irq(&lp->lock); + return ret; +} + +static u32 el3_get_msglevel(struct net_device *dev) +{ + return el3_debug; +} + +static void el3_set_msglevel(struct net_device *dev, u32 v) +{ + el3_debug = v; +} + +static const struct ethtool_ops ethtool_ops = { + .get_drvinfo = el3_get_drvinfo, + .get_settings = el3_get_settings, + .set_settings = el3_set_settings, + .get_link = el3_get_link, + .get_msglevel = el3_get_msglevel, + .set_msglevel = el3_set_msglevel, +}; + +static void +el3_down(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + + netif_stop_queue(dev); + + /* Turn off statistics ASAP. We update lp->stats below. */ + outw(StatsDisable, ioaddr + EL3_CMD); + + /* Disable the receiver and transmitter. */ + outw(RxDisable, ioaddr + EL3_CMD); + outw(TxDisable, ioaddr + EL3_CMD); + + if (dev->if_port == 3) + /* Turn off thinnet power. Green! */ + outw(StopCoax, ioaddr + EL3_CMD); + else if (dev->if_port == 0) { + /* Disable link beat and jabber, if_port may change here next open(). */ + EL3WINDOW(4); + outw(inw(ioaddr + WN4_MEDIA) & ~MEDIA_TP, ioaddr + WN4_MEDIA); + } + + outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD); + + update_stats(dev); +} + +static void +el3_up(struct net_device *dev) +{ + int i, sw_info, net_diag; + int ioaddr = dev->base_addr; + + /* Activating the board required and does no harm otherwise */ + outw(0x0001, ioaddr + 4); + + /* Set the IRQ line. */ + outw((dev->irq << 12) | 0x0f00, ioaddr + WN0_IRQ); + + /* Set the station address in window 2 each time opened. */ + EL3WINDOW(2); + + for (i = 0; i < 6; i++) + outb(dev->dev_addr[i], ioaddr + i); + + if ((dev->if_port & 0x03) == 3) /* BNC interface */ + /* Start the thinnet transceiver. We should really wait 50ms...*/ + outw(StartCoax, ioaddr + EL3_CMD); + else if ((dev->if_port & 0x03) == 0) { /* 10baseT interface */ + /* Combine secondary sw_info word (the adapter level) and primary + sw_info word (duplex setting plus other useless bits) */ + EL3WINDOW(0); + sw_info = (read_eeprom(ioaddr, 0x14) & 0x400f) | + (read_eeprom(ioaddr, 0x0d) & 0xBff0); + + EL3WINDOW(4); + net_diag = inw(ioaddr + WN4_NETDIAG); + net_diag = (net_diag | FD_ENABLE); /* temporarily assume full-duplex will be set */ + pr_info("%s: ", dev->name); + switch (dev->if_port & 0x0c) { + case 12: + /* force full-duplex mode if 3c5x9b */ + if (sw_info & 0x000f) { + pr_cont("Forcing 3c5x9b full-duplex mode"); + break; + } + case 8: + /* set full-duplex mode based on eeprom config setting */ + if ((sw_info & 0x000f) && (sw_info & 0x8000)) { + pr_cont("Setting 3c5x9b full-duplex mode (from EEPROM configuration bit)"); + break; + } + default: + /* xcvr=(0 || 4) OR user has an old 3c5x9 non "B" model */ + pr_cont("Setting 3c5x9/3c5x9B half-duplex mode"); + net_diag = (net_diag & ~FD_ENABLE); /* disable full duplex */ + } + + outw(net_diag, ioaddr + WN4_NETDIAG); + pr_cont(" if_port: %d, sw_info: %4.4x\n", dev->if_port, sw_info); + if (el3_debug > 3) + pr_debug("%s: 3c5x9 net diag word is now: %4.4x.\n", dev->name, net_diag); + /* Enable link beat and jabber check. */ + outw(inw(ioaddr + WN4_MEDIA) | MEDIA_TP, ioaddr + WN4_MEDIA); + } + + /* Switch to the stats window, and clear all stats by reading. */ + outw(StatsDisable, ioaddr + EL3_CMD); + EL3WINDOW(6); + for (i = 0; i < 9; i++) + inb(ioaddr + i); + inw(ioaddr + 10); + inw(ioaddr + 12); + + /* Switch to register set 1 for normal use. */ + EL3WINDOW(1); + + /* Accept b-case and phys addr only. */ + outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD); + outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */ + + outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */ + outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */ + /* Allow status bits to be seen. */ + outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD); + /* Ack all pending events, and set active indicator mask. */ + outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq, + ioaddr + EL3_CMD); + outw(SetIntrEnb | IntLatch|TxAvailable|TxComplete|RxComplete|StatsFull, + ioaddr + EL3_CMD); + + netif_start_queue(dev); +} + +/* Power Management support functions */ +#ifdef CONFIG_PM + +static int +el3_suspend(struct device *pdev, pm_message_t state) +{ + unsigned long flags; + struct net_device *dev; + struct el3_private *lp; + int ioaddr; + + dev = dev_get_drvdata(pdev); + lp = netdev_priv(dev); + ioaddr = dev->base_addr; + + spin_lock_irqsave(&lp->lock, flags); + + if (netif_running(dev)) + netif_device_detach(dev); + + el3_down(dev); + outw(PowerDown, ioaddr + EL3_CMD); + + spin_unlock_irqrestore(&lp->lock, flags); + return 0; +} + +static int +el3_resume(struct device *pdev) +{ + unsigned long flags; + struct net_device *dev; + struct el3_private *lp; + int ioaddr; + + dev = dev_get_drvdata(pdev); + lp = netdev_priv(dev); + ioaddr = dev->base_addr; + + spin_lock_irqsave(&lp->lock, flags); + + outw(PowerUp, ioaddr + EL3_CMD); + EL3WINDOW(0); + el3_up(dev); + + if (netif_running(dev)) + netif_device_attach(dev); + + spin_unlock_irqrestore(&lp->lock, flags); + return 0; +} + +#endif /* CONFIG_PM */ + +module_param(debug,int, 0); +module_param_array(irq, int, NULL, 0); +module_param(max_interrupt_work, int, 0); +MODULE_PARM_DESC(debug, "debug level (0-6)"); +MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); +MODULE_PARM_DESC(max_interrupt_work, "maximum events handled per interrupt"); +#ifdef CONFIG_PNP +module_param(nopnp, int, 0); +MODULE_PARM_DESC(nopnp, "disable ISA PnP support (0-1)"); +#endif /* CONFIG_PNP */ +MODULE_DESCRIPTION("3Com Etherlink III (3c509, 3c509B, 3c529, 3c579) ethernet driver"); +MODULE_LICENSE("GPL"); + +static int __init el3_init_module(void) +{ + int ret = 0; + + if (debug >= 0) + el3_debug = debug; + +#ifdef CONFIG_PNP + if (!nopnp) { + ret = pnp_register_driver(&el3_pnp_driver); + if (!ret) + pnp_registered = 1; + } +#endif + /* Select an open I/O location at 0x1*0 to do ISA contention select. */ + /* Start with 0x110 to avoid some sound cards.*/ + for (id_port = 0x110 ; id_port < 0x200; id_port += 0x10) { + if (!request_region(id_port, 1, "3c509-control")) + continue; + outb(0x00, id_port); + outb(0xff, id_port); + if (inb(id_port) & 0x01) + break; + else + release_region(id_port, 1); + } + if (id_port >= 0x200) { + id_port = 0; + pr_err("No I/O port available for 3c509 activation.\n"); + } else { + ret = isa_register_driver(&el3_isa_driver, EL3_MAX_CARDS); + if (!ret) + isa_registered = 1; + } +#ifdef CONFIG_EISA + ret = eisa_driver_register(&el3_eisa_driver); + if (!ret) + eisa_registered = 1; +#endif +#ifdef CONFIG_MCA + ret = mca_register_driver(&el3_mca_driver); + if (!ret) + mca_registered = 1; +#endif + +#ifdef CONFIG_PNP + if (pnp_registered) + ret = 0; +#endif + if (isa_registered) + ret = 0; +#ifdef CONFIG_EISA + if (eisa_registered) + ret = 0; +#endif +#ifdef CONFIG_MCA + if (mca_registered) + ret = 0; +#endif + return ret; +} + +static void __exit el3_cleanup_module(void) +{ +#ifdef CONFIG_PNP + if (pnp_registered) + pnp_unregister_driver(&el3_pnp_driver); +#endif + if (isa_registered) + isa_unregister_driver(&el3_isa_driver); + if (id_port) + release_region(id_port, 1); +#ifdef CONFIG_EISA + if (eisa_registered) + eisa_driver_unregister(&el3_eisa_driver); +#endif +#ifdef CONFIG_MCA + if (mca_registered) + mca_unregister_driver(&el3_mca_driver); +#endif +} + +module_init (el3_init_module); +module_exit (el3_cleanup_module); diff --git a/drivers/net/ethernet/3com/3c515.c b/drivers/net/ethernet/3com/3c515.c new file mode 100644 index 000000000000..d2bb4b254c57 --- /dev/null +++ b/drivers/net/ethernet/3com/3c515.c @@ -0,0 +1,1584 @@ +/* + Written 1997-1998 by Donald Becker. + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + This driver is for the 3Com ISA EtherLink XL "Corkscrew" 3c515 ethercard. + + The author may be reached as becker@scyld.com, or C/O + Scyld Computing Corporation + 410 Severn Ave., Suite 210 + Annapolis MD 21403 + + + 2000/2/2- Added support for kernel-level ISAPnP + by Stephen Frost <sfrost@snowman.net> and Alessandro Zummo + Cleaned up for 2.3.x/softnet by Jeff Garzik and Alan Cox. + + 2001/11/17 - Added ethtool support (jgarzik) + + 2002/10/28 - Locking updates for 2.5 (alan@lxorguk.ukuu.org.uk) + +*/ + +#define DRV_NAME "3c515" +#define DRV_VERSION "0.99t-ac" +#define DRV_RELDATE "28-Oct-2002" + +static char *version = +DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " becker@scyld.com and others\n"; + +#define CORKSCREW 1 + +/* "Knobs" that adjust features and parameters. */ +/* Set the copy breakpoint for the copy-only-tiny-frames scheme. + Setting to > 1512 effectively disables this feature. */ +static int rx_copybreak = 200; + +/* Allow setting MTU to a larger size, bypassing the normal ethernet setup. */ +static const int mtu = 1500; + +/* Maximum events (Rx packets, etc.) to handle at each interrupt. */ +static int max_interrupt_work = 20; + +/* Enable the automatic media selection code -- usually set. */ +#define AUTOMEDIA 1 + +/* Allow the use of fragment bus master transfers instead of only + programmed-I/O for Vortex cards. Full-bus-master transfers are always + enabled by default on Boomerang cards. If VORTEX_BUS_MASTER is defined, + the feature may be turned on using 'options'. */ +#define VORTEX_BUS_MASTER + +/* A few values that may be tweaked. */ +/* Keep the ring sizes a power of two for efficiency. */ +#define TX_RING_SIZE 16 +#define RX_RING_SIZE 16 +#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer. */ + +#include <linux/module.h> +#include <linux/isapnp.h> +#include <linux/kernel.h> +#include <linux/netdevice.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/in.h> +#include <linux/ioport.h> +#include <linux/skbuff.h> +#include <linux/etherdevice.h> +#include <linux/interrupt.h> +#include <linux/timer.h> +#include <linux/ethtool.h> +#include <linux/bitops.h> + +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/dma.h> + +#define NEW_MULTICAST +#include <linux/delay.h> + +#define MAX_UNITS 8 + +MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); +MODULE_DESCRIPTION("3Com 3c515 Corkscrew driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +/* "Knobs" for adjusting internal parameters. */ +/* Put out somewhat more debugging messages. (0 - no msg, 1 minimal msgs). */ +#define DRIVER_DEBUG 1 +/* Some values here only for performance evaluation and path-coverage + debugging. */ +static int rx_nocopy, rx_copy, queued_packet; + +/* Number of times to check to see if the Tx FIFO has space, used in some + limited cases. */ +#define WAIT_TX_AVAIL 200 + +/* Operational parameter that usually are not changed. */ +#define TX_TIMEOUT ((4*HZ)/10) /* Time in jiffies before concluding Tx hung */ + +/* The size here is somewhat misleading: the Corkscrew also uses the ISA + aliased registers at <base>+0x400. + */ +#define CORKSCREW_TOTAL_SIZE 0x20 + +#ifdef DRIVER_DEBUG +static int corkscrew_debug = DRIVER_DEBUG; +#else +static int corkscrew_debug = 1; +#endif + +#define CORKSCREW_ID 10 + +/* + Theory of Operation + +I. Board Compatibility + +This device driver is designed for the 3Com 3c515 ISA Fast EtherLink XL, +3Com's ISA bus adapter for Fast Ethernet. Due to the unique I/O port layout, +it's not practical to integrate this driver with the other EtherLink drivers. + +II. Board-specific settings + +The Corkscrew has an EEPROM for configuration, but no special settings are +needed for Linux. + +III. Driver operation + +The 3c515 series use an interface that's very similar to the 3c900 "Boomerang" +PCI cards, with the bus master interface extensively modified to work with +the ISA bus. + +The card is capable of full-bus-master transfers with separate +lists of transmit and receive descriptors, similar to the AMD LANCE/PCnet, +DEC Tulip and Intel Speedo3. + +This driver uses a "RX_COPYBREAK" scheme rather than a fixed intermediate +receive buffer. This scheme allocates full-sized skbuffs as receive +buffers. The value RX_COPYBREAK is used as the copying breakpoint: it is +chosen to trade-off the memory wasted by passing the full-sized skbuff to +the queue layer for all frames vs. the copying cost of copying a frame to a +correctly-sized skbuff. + + +IIIC. Synchronization +The driver runs as two independent, single-threaded flows of control. One +is the send-packet routine, which enforces single-threaded use by the netif +layer. The other thread is the interrupt handler, which is single +threaded by the hardware and other software. + +IV. Notes + +Thanks to Terry Murphy of 3Com for providing documentation and a development +board. + +The names "Vortex", "Boomerang" and "Corkscrew" are the internal 3Com +project names. I use these names to eliminate confusion -- 3Com product +numbers and names are very similar and often confused. + +The new chips support both ethernet (1.5K) and FDDI (4.5K) frame sizes! +This driver only supports ethernet frames because of the recent MTU limit +of 1.5K, but the changes to support 4.5K are minimal. +*/ + +/* Operational definitions. + These are not used by other compilation units and thus are not + exported in a ".h" file. + + First the windows. There are eight register windows, with the command + and status registers available in each. + */ +#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD) +#define EL3_CMD 0x0e +#define EL3_STATUS 0x0e + +/* The top five bits written to EL3_CMD are a command, the lower + 11 bits are the parameter, if applicable. + Note that 11 parameters bits was fine for ethernet, but the new chips + can handle FDDI length frames (~4500 octets) and now parameters count + 32-bit 'Dwords' rather than octets. */ + +enum corkscrew_cmd { + TotalReset = 0 << 11, SelectWindow = 1 << 11, StartCoax = 2 << 11, + RxDisable = 3 << 11, RxEnable = 4 << 11, RxReset = 5 << 11, + UpStall = 6 << 11, UpUnstall = (6 << 11) + 1, DownStall = (6 << 11) + 2, + DownUnstall = (6 << 11) + 3, RxDiscard = 8 << 11, TxEnable = 9 << 11, + TxDisable = 10 << 11, TxReset = 11 << 11, FakeIntr = 12 << 11, + AckIntr = 13 << 11, SetIntrEnb = 14 << 11, SetStatusEnb = 15 << 11, + SetRxFilter = 16 << 11, SetRxThreshold = 17 << 11, + SetTxThreshold = 18 << 11, SetTxStart = 19 << 11, StartDMAUp = 20 << 11, + StartDMADown = (20 << 11) + 1, StatsEnable = 21 << 11, + StatsDisable = 22 << 11, StopCoax = 23 << 11, +}; + +/* The SetRxFilter command accepts the following classes: */ +enum RxFilter { + RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 +}; + +/* Bits in the general status register. */ +enum corkscrew_status { + IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004, + TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020, + IntReq = 0x0040, StatsFull = 0x0080, + DMADone = 1 << 8, DownComplete = 1 << 9, UpComplete = 1 << 10, + DMAInProgress = 1 << 11, /* DMA controller is still busy. */ + CmdInProgress = 1 << 12, /* EL3_CMD is still busy. */ +}; + +/* Register window 1 offsets, the window used in normal operation. + On the Corkscrew this window is always mapped at offsets 0x10-0x1f. */ +enum Window1 { + TX_FIFO = 0x10, RX_FIFO = 0x10, RxErrors = 0x14, + RxStatus = 0x18, Timer = 0x1A, TxStatus = 0x1B, + TxFree = 0x1C, /* Remaining free bytes in Tx buffer. */ +}; +enum Window0 { + Wn0IRQ = 0x08, +#if defined(CORKSCREW) + Wn0EepromCmd = 0x200A, /* Corkscrew EEPROM command register. */ + Wn0EepromData = 0x200C, /* Corkscrew EEPROM results register. */ +#else + Wn0EepromCmd = 10, /* Window 0: EEPROM command register. */ + Wn0EepromData = 12, /* Window 0: EEPROM results register. */ +#endif +}; +enum Win0_EEPROM_bits { + EEPROM_Read = 0x80, EEPROM_WRITE = 0x40, EEPROM_ERASE = 0xC0, + EEPROM_EWENB = 0x30, /* Enable erasing/writing for 10 msec. */ + EEPROM_EWDIS = 0x00, /* Disable EWENB before 10 msec timeout. */ +}; + +/* EEPROM locations. */ +enum eeprom_offset { + PhysAddr01 = 0, PhysAddr23 = 1, PhysAddr45 = 2, ModelID = 3, + EtherLink3ID = 7, +}; + +enum Window3 { /* Window 3: MAC/config bits. */ + Wn3_Config = 0, Wn3_MAC_Ctrl = 6, Wn3_Options = 8, +}; +enum wn3_config { + Ram_size = 7, + Ram_width = 8, + Ram_speed = 0x30, + Rom_size = 0xc0, + Ram_split_shift = 16, + Ram_split = 3 << Ram_split_shift, + Xcvr_shift = 20, + Xcvr = 7 << Xcvr_shift, + Autoselect = 0x1000000, +}; + +enum Window4 { + Wn4_NetDiag = 6, Wn4_Media = 10, /* Window 4: Xcvr/media bits. */ +}; +enum Win4_Media_bits { + Media_SQE = 0x0008, /* Enable SQE error counting for AUI. */ + Media_10TP = 0x00C0, /* Enable link beat and jabber for 10baseT. */ + Media_Lnk = 0x0080, /* Enable just link beat for 100TX/100FX. */ + Media_LnkBeat = 0x0800, +}; +enum Window7 { /* Window 7: Bus Master control. */ + Wn7_MasterAddr = 0, Wn7_MasterLen = 6, Wn7_MasterStatus = 12, +}; + +/* Boomerang-style bus master control registers. Note ISA aliases! */ +enum MasterCtrl { + PktStatus = 0x400, DownListPtr = 0x404, FragAddr = 0x408, FragLen = + 0x40c, + TxFreeThreshold = 0x40f, UpPktStatus = 0x410, UpListPtr = 0x418, +}; + +/* The Rx and Tx descriptor lists. + Caution Alpha hackers: these types are 32 bits! Note also the 8 byte + alignment contraint on tx_ring[] and rx_ring[]. */ +struct boom_rx_desc { + u32 next; + s32 status; + u32 addr; + s32 length; +}; + +/* Values for the Rx status entry. */ +enum rx_desc_status { + RxDComplete = 0x00008000, RxDError = 0x4000, + /* See boomerang_rx() for actual error bits */ +}; + +struct boom_tx_desc { + u32 next; + s32 status; + u32 addr; + s32 length; +}; + +struct corkscrew_private { + const char *product_name; + struct list_head list; + struct net_device *our_dev; + /* The Rx and Tx rings are here to keep them quad-word-aligned. */ + struct boom_rx_desc rx_ring[RX_RING_SIZE]; + struct boom_tx_desc tx_ring[TX_RING_SIZE]; + /* The addresses of transmit- and receive-in-place skbuffs. */ + struct sk_buff *rx_skbuff[RX_RING_SIZE]; + struct sk_buff *tx_skbuff[TX_RING_SIZE]; + unsigned int cur_rx, cur_tx; /* The next free ring entry */ + unsigned int dirty_rx, dirty_tx;/* The ring entries to be free()ed. */ + struct sk_buff *tx_skb; /* Packet being eaten by bus master ctrl. */ + struct timer_list timer; /* Media selection timer. */ + int capabilities ; /* Adapter capabilities word. */ + int options; /* User-settable misc. driver options. */ + int last_rx_packets; /* For media autoselection. */ + unsigned int available_media:8, /* From Wn3_Options */ + media_override:3, /* Passed-in media type. */ + default_media:3, /* Read from the EEPROM. */ + full_duplex:1, autoselect:1, bus_master:1, /* Vortex can only do a fragment bus-m. */ + full_bus_master_tx:1, full_bus_master_rx:1, /* Boomerang */ + tx_full:1; + spinlock_t lock; + struct device *dev; +}; + +/* The action to take with a media selection timer tick. + Note that we deviate from the 3Com order by checking 10base2 before AUI. + */ +enum xcvr_types { + XCVR_10baseT = 0, XCVR_AUI, XCVR_10baseTOnly, XCVR_10base2, XCVR_100baseTx, + XCVR_100baseFx, XCVR_MII = 6, XCVR_Default = 8, +}; + +static struct media_table { + char *name; + unsigned int media_bits:16, /* Bits to set in Wn4_Media register. */ + mask:8, /* The transceiver-present bit in Wn3_Config. */ + next:8; /* The media type to try next. */ + short wait; /* Time before we check media status. */ +} media_tbl[] = { + { "10baseT", Media_10TP, 0x08, XCVR_10base2, (14 * HZ) / 10 }, + { "10Mbs AUI", Media_SQE, 0x20, XCVR_Default, (1 * HZ) / 10}, + { "undefined", 0, 0x80, XCVR_10baseT, 10000}, + { "10base2", 0, 0x10, XCVR_AUI, (1 * HZ) / 10}, + { "100baseTX", Media_Lnk, 0x02, XCVR_100baseFx, (14 * HZ) / 10}, + { "100baseFX", Media_Lnk, 0x04, XCVR_MII, (14 * HZ) / 10}, + { "MII", 0, 0x40, XCVR_10baseT, 3 * HZ}, + { "undefined", 0, 0x01, XCVR_10baseT, 10000}, + { "Default", 0, 0xFF, XCVR_10baseT, 10000}, +}; + +#ifdef __ISAPNP__ +static struct isapnp_device_id corkscrew_isapnp_adapters[] = { + { ISAPNP_ANY_ID, ISAPNP_ANY_ID, + ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5051), + (long) "3Com Fast EtherLink ISA" }, + { } /* terminate list */ +}; + +MODULE_DEVICE_TABLE(isapnp, corkscrew_isapnp_adapters); + +static int nopnp; +#endif /* __ISAPNP__ */ + +static struct net_device *corkscrew_scan(int unit); +static int corkscrew_setup(struct net_device *dev, int ioaddr, + struct pnp_dev *idev, int card_number); +static int corkscrew_open(struct net_device *dev); +static void corkscrew_timer(unsigned long arg); +static netdev_tx_t corkscrew_start_xmit(struct sk_buff *skb, + struct net_device *dev); +static int corkscrew_rx(struct net_device *dev); +static void corkscrew_timeout(struct net_device *dev); +static int boomerang_rx(struct net_device *dev); +static irqreturn_t corkscrew_interrupt(int irq, void *dev_id); +static int corkscrew_close(struct net_device *dev); +static void update_stats(int addr, struct net_device *dev); +static struct net_device_stats *corkscrew_get_stats(struct net_device *dev); +static void set_rx_mode(struct net_device *dev); +static const struct ethtool_ops netdev_ethtool_ops; + + +/* + Unfortunately maximizing the shared code between the integrated and + module version of the driver results in a complicated set of initialization + procedures. + init_module() -- modules / tc59x_init() -- built-in + The wrappers for corkscrew_scan() + corkscrew_scan() The common routine that scans for PCI and EISA cards + corkscrew_found_device() Allocate a device structure when we find a card. + Different versions exist for modules and built-in. + corkscrew_probe1() Fill in the device structure -- this is separated + so that the modules code can put it in dev->init. +*/ +/* This driver uses 'options' to pass the media type, full-duplex flag, etc. */ +/* Note: this is the only limit on the number of cards supported!! */ +static int options[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1, }; + +#ifdef MODULE +static int debug = -1; + +module_param(debug, int, 0); +module_param_array(options, int, NULL, 0); +module_param(rx_copybreak, int, 0); +module_param(max_interrupt_work, int, 0); +MODULE_PARM_DESC(debug, "3c515 debug level (0-6)"); +MODULE_PARM_DESC(options, "3c515: Bits 0-2: media type, bit 3: full duplex, bit 4: bus mastering"); +MODULE_PARM_DESC(rx_copybreak, "3c515 copy breakpoint for copy-only-tiny-frames"); +MODULE_PARM_DESC(max_interrupt_work, "3c515 maximum events handled per interrupt"); + +/* A list of all installed Vortex devices, for removing the driver module. */ +/* we will need locking (and refcounting) if we ever use it for more */ +static LIST_HEAD(root_corkscrew_dev); + +int init_module(void) +{ + int found = 0; + if (debug >= 0) + corkscrew_debug = debug; + if (corkscrew_debug) + pr_debug("%s", version); + while (corkscrew_scan(-1)) + found++; + return found ? 0 : -ENODEV; +} + +#else +struct net_device *tc515_probe(int unit) +{ + struct net_device *dev = corkscrew_scan(unit); + static int printed; + + if (!dev) + return ERR_PTR(-ENODEV); + + if (corkscrew_debug > 0 && !printed) { + printed = 1; + pr_debug("%s", version); + } + + return dev; +} +#endif /* not MODULE */ + +static int check_device(unsigned ioaddr) +{ + int timer; + + if (!request_region(ioaddr, CORKSCREW_TOTAL_SIZE, "3c515")) + return 0; + /* Check the resource configuration for a matching ioaddr. */ + if ((inw(ioaddr + 0x2002) & 0x1f0) != (ioaddr & 0x1f0)) { + release_region(ioaddr, CORKSCREW_TOTAL_SIZE); + return 0; + } + /* Verify by reading the device ID from the EEPROM. */ + outw(EEPROM_Read + 7, ioaddr + Wn0EepromCmd); + /* Pause for at least 162 us. for the read to take place. */ + for (timer = 4; timer >= 0; timer--) { + udelay(162); + if ((inw(ioaddr + Wn0EepromCmd) & 0x0200) == 0) + break; + } + if (inw(ioaddr + Wn0EepromData) != 0x6d50) { + release_region(ioaddr, CORKSCREW_TOTAL_SIZE); + return 0; + } + return 1; +} + +static void cleanup_card(struct net_device *dev) +{ + struct corkscrew_private *vp = netdev_priv(dev); + list_del_init(&vp->list); + if (dev->dma) + free_dma(dev->dma); + outw(TotalReset, dev->base_addr + EL3_CMD); + release_region(dev->base_addr, CORKSCREW_TOTAL_SIZE); + if (vp->dev) + pnp_device_detach(to_pnp_dev(vp->dev)); +} + +static struct net_device *corkscrew_scan(int unit) +{ + struct net_device *dev; + static int cards_found = 0; + static int ioaddr; + int err; +#ifdef __ISAPNP__ + short i; + static int pnp_cards; +#endif + + dev = alloc_etherdev(sizeof(struct corkscrew_private)); + if (!dev) + return ERR_PTR(-ENOMEM); + + if (unit >= 0) { + sprintf(dev->name, "eth%d", unit); + netdev_boot_setup_check(dev); + } + +#ifdef __ISAPNP__ + if(nopnp == 1) + goto no_pnp; + for(i=0; corkscrew_isapnp_adapters[i].vendor != 0; i++) { + struct pnp_dev *idev = NULL; + int irq; + while((idev = pnp_find_dev(NULL, + corkscrew_isapnp_adapters[i].vendor, + corkscrew_isapnp_adapters[i].function, + idev))) { + + if (pnp_device_attach(idev) < 0) + continue; + if (pnp_activate_dev(idev) < 0) { + pr_warning("pnp activate failed (out of resources?)\n"); + pnp_device_detach(idev); + continue; + } + if (!pnp_port_valid(idev, 0) || !pnp_irq_valid(idev, 0)) { + pnp_device_detach(idev); + continue; + } + ioaddr = pnp_port_start(idev, 0); + irq = pnp_irq(idev, 0); + if (!check_device(ioaddr)) { + pnp_device_detach(idev); + continue; + } + if(corkscrew_debug) + pr_debug("ISAPNP reports %s at i/o 0x%x, irq %d\n", + (char*) corkscrew_isapnp_adapters[i].driver_data, ioaddr, irq); + pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n", + inl(ioaddr + 0x2002), inw(ioaddr + 0x2000)); + /* irq = inw(ioaddr + 0x2002) & 15; */ /* Use the irq from isapnp */ + SET_NETDEV_DEV(dev, &idev->dev); + pnp_cards++; + err = corkscrew_setup(dev, ioaddr, idev, cards_found++); + if (!err) + return dev; + cleanup_card(dev); + } + } +no_pnp: +#endif /* __ISAPNP__ */ + + /* Check all locations on the ISA bus -- evil! */ + for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x20) { + if (!check_device(ioaddr)) + continue; + + pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n", + inl(ioaddr + 0x2002), inw(ioaddr + 0x2000)); + err = corkscrew_setup(dev, ioaddr, NULL, cards_found++); + if (!err) + return dev; + cleanup_card(dev); + } + free_netdev(dev); + return NULL; +} + + +static const struct net_device_ops netdev_ops = { + .ndo_open = corkscrew_open, + .ndo_stop = corkscrew_close, + .ndo_start_xmit = corkscrew_start_xmit, + .ndo_tx_timeout = corkscrew_timeout, + .ndo_get_stats = corkscrew_get_stats, + .ndo_set_multicast_list = set_rx_mode, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + + +static int corkscrew_setup(struct net_device *dev, int ioaddr, + struct pnp_dev *idev, int card_number) +{ + struct corkscrew_private *vp = netdev_priv(dev); + unsigned int eeprom[0x40], checksum = 0; /* EEPROM contents */ + int i; + int irq; + +#ifdef __ISAPNP__ + if (idev) { + irq = pnp_irq(idev, 0); + vp->dev = &idev->dev; + } else { + irq = inw(ioaddr + 0x2002) & 15; + } +#else + irq = inw(ioaddr + 0x2002) & 15; +#endif + + dev->base_addr = ioaddr; + dev->irq = irq; + dev->dma = inw(ioaddr + 0x2000) & 7; + vp->product_name = "3c515"; + vp->options = dev->mem_start; + vp->our_dev = dev; + + if (!vp->options) { + if (card_number >= MAX_UNITS) + vp->options = -1; + else + vp->options = options[card_number]; + } + + if (vp->options >= 0) { + vp->media_override = vp->options & 7; + if (vp->media_override == 2) + vp->media_override = 0; + vp->full_duplex = (vp->options & 8) ? 1 : 0; + vp->bus_master = (vp->options & 16) ? 1 : 0; + } else { + vp->media_override = 7; + vp->full_duplex = 0; + vp->bus_master = 0; + } +#ifdef MODULE + list_add(&vp->list, &root_corkscrew_dev); +#endif + + pr_info("%s: 3Com %s at %#3x,", dev->name, vp->product_name, ioaddr); + + spin_lock_init(&vp->lock); + + /* Read the station address from the EEPROM. */ + EL3WINDOW(0); + for (i = 0; i < 0x18; i++) { + __be16 *phys_addr = (__be16 *) dev->dev_addr; + int timer; + outw(EEPROM_Read + i, ioaddr + Wn0EepromCmd); + /* Pause for at least 162 us. for the read to take place. */ + for (timer = 4; timer >= 0; timer--) { + udelay(162); + if ((inw(ioaddr + Wn0EepromCmd) & 0x0200) == 0) + break; + } + eeprom[i] = inw(ioaddr + Wn0EepromData); + checksum ^= eeprom[i]; + if (i < 3) + phys_addr[i] = htons(eeprom[i]); + } + checksum = (checksum ^ (checksum >> 8)) & 0xff; + if (checksum != 0x00) + pr_cont(" ***INVALID CHECKSUM %4.4x*** ", checksum); + pr_cont(" %pM", dev->dev_addr); + if (eeprom[16] == 0x11c7) { /* Corkscrew */ + if (request_dma(dev->dma, "3c515")) { + pr_cont(", DMA %d allocation failed", dev->dma); + dev->dma = 0; + } else + pr_cont(", DMA %d", dev->dma); + } + pr_cont(", IRQ %d\n", dev->irq); + /* Tell them about an invalid IRQ. */ + if (corkscrew_debug && (dev->irq <= 0 || dev->irq > 15)) + pr_warning(" *** Warning: this IRQ is unlikely to work! ***\n"); + + { + static const char * const ram_split[] = { + "5:3", "3:1", "1:1", "3:5" + }; + __u32 config; + EL3WINDOW(3); + vp->available_media = inw(ioaddr + Wn3_Options); + config = inl(ioaddr + Wn3_Config); + if (corkscrew_debug > 1) + pr_info(" Internal config register is %4.4x, transceivers %#x.\n", + config, inw(ioaddr + Wn3_Options)); + pr_info(" %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n", + 8 << config & Ram_size, + config & Ram_width ? "word" : "byte", + ram_split[(config & Ram_split) >> Ram_split_shift], + config & Autoselect ? "autoselect/" : "", + media_tbl[(config & Xcvr) >> Xcvr_shift].name); + vp->default_media = (config & Xcvr) >> Xcvr_shift; + vp->autoselect = config & Autoselect ? 1 : 0; + dev->if_port = vp->default_media; + } + if (vp->media_override != 7) { + pr_info(" Media override to transceiver type %d (%s).\n", + vp->media_override, + media_tbl[vp->media_override].name); + dev->if_port = vp->media_override; + } + + vp->capabilities = eeprom[16]; + vp->full_bus_master_tx = (vp->capabilities & 0x20) ? 1 : 0; + /* Rx is broken at 10mbps, so we always disable it. */ + /* vp->full_bus_master_rx = 0; */ + vp->full_bus_master_rx = (vp->capabilities & 0x20) ? 1 : 0; + + /* The 3c51x-specific entries in the device structure. */ + dev->netdev_ops = &netdev_ops; + dev->watchdog_timeo = (400 * HZ) / 1000; + dev->ethtool_ops = &netdev_ethtool_ops; + + return register_netdev(dev); +} + + +static int corkscrew_open(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + struct corkscrew_private *vp = netdev_priv(dev); + __u32 config; + int i; + + /* Before initializing select the active media port. */ + EL3WINDOW(3); + if (vp->full_duplex) + outb(0x20, ioaddr + Wn3_MAC_Ctrl); /* Set the full-duplex bit. */ + config = inl(ioaddr + Wn3_Config); + + if (vp->media_override != 7) { + if (corkscrew_debug > 1) + pr_info("%s: Media override to transceiver %d (%s).\n", + dev->name, vp->media_override, + media_tbl[vp->media_override].name); + dev->if_port = vp->media_override; + } else if (vp->autoselect) { + /* Find first available media type, starting with 100baseTx. */ + dev->if_port = 4; + while (!(vp->available_media & media_tbl[dev->if_port].mask)) + dev->if_port = media_tbl[dev->if_port].next; + + if (corkscrew_debug > 1) + pr_debug("%s: Initial media type %s.\n", + dev->name, media_tbl[dev->if_port].name); + + init_timer(&vp->timer); + vp->timer.expires = jiffies + media_tbl[dev->if_port].wait; + vp->timer.data = (unsigned long) dev; + vp->timer.function = corkscrew_timer; /* timer handler */ + add_timer(&vp->timer); + } else + dev->if_port = vp->default_media; + + config = (config & ~Xcvr) | (dev->if_port << Xcvr_shift); + outl(config, ioaddr + Wn3_Config); + + if (corkscrew_debug > 1) { + pr_debug("%s: corkscrew_open() InternalConfig %8.8x.\n", + dev->name, config); + } + + outw(TxReset, ioaddr + EL3_CMD); + for (i = 20; i >= 0; i--) + if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress)) + break; + + outw(RxReset, ioaddr + EL3_CMD); + /* Wait a few ticks for the RxReset command to complete. */ + for (i = 20; i >= 0; i--) + if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress)) + break; + + outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD); + + /* Use the now-standard shared IRQ implementation. */ + if (vp->capabilities == 0x11c7) { + /* Corkscrew: Cannot share ISA resources. */ + if (dev->irq == 0 || + dev->dma == 0 || + request_irq(dev->irq, corkscrew_interrupt, 0, + vp->product_name, dev)) + return -EAGAIN; + enable_dma(dev->dma); + set_dma_mode(dev->dma, DMA_MODE_CASCADE); + } else if (request_irq(dev->irq, corkscrew_interrupt, IRQF_SHARED, + vp->product_name, dev)) { + return -EAGAIN; + } + + if (corkscrew_debug > 1) { + EL3WINDOW(4); + pr_debug("%s: corkscrew_open() irq %d media status %4.4x.\n", + dev->name, dev->irq, inw(ioaddr + Wn4_Media)); + } + + /* Set the station address and mask in window 2 each time opened. */ + EL3WINDOW(2); + for (i = 0; i < 6; i++) + outb(dev->dev_addr[i], ioaddr + i); + for (; i < 12; i += 2) + outw(0, ioaddr + i); + + if (dev->if_port == 3) + /* Start the thinnet transceiver. We should really wait 50ms... */ + outw(StartCoax, ioaddr + EL3_CMD); + EL3WINDOW(4); + outw((inw(ioaddr + Wn4_Media) & ~(Media_10TP | Media_SQE)) | + media_tbl[dev->if_port].media_bits, ioaddr + Wn4_Media); + + /* Switch to the stats window, and clear all stats by reading. */ + outw(StatsDisable, ioaddr + EL3_CMD); + EL3WINDOW(6); + for (i = 0; i < 10; i++) + inb(ioaddr + i); + inw(ioaddr + 10); + inw(ioaddr + 12); + /* New: On the Vortex we must also clear the BadSSD counter. */ + EL3WINDOW(4); + inb(ioaddr + 12); + /* ..and on the Boomerang we enable the extra statistics bits. */ + outw(0x0040, ioaddr + Wn4_NetDiag); + + /* Switch to register set 7 for normal use. */ + EL3WINDOW(7); + + if (vp->full_bus_master_rx) { /* Boomerang bus master. */ + vp->cur_rx = vp->dirty_rx = 0; + if (corkscrew_debug > 2) + pr_debug("%s: Filling in the Rx ring.\n", dev->name); + for (i = 0; i < RX_RING_SIZE; i++) { + struct sk_buff *skb; + if (i < (RX_RING_SIZE - 1)) + vp->rx_ring[i].next = + isa_virt_to_bus(&vp->rx_ring[i + 1]); + else + vp->rx_ring[i].next = 0; + vp->rx_ring[i].status = 0; /* Clear complete bit. */ + vp->rx_ring[i].length = PKT_BUF_SZ | 0x80000000; + skb = dev_alloc_skb(PKT_BUF_SZ); + vp->rx_skbuff[i] = skb; + if (skb == NULL) + break; /* Bad news! */ + skb->dev = dev; /* Mark as being used by this device. */ + skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ + vp->rx_ring[i].addr = isa_virt_to_bus(skb->data); + } + if (i != 0) + vp->rx_ring[i - 1].next = + isa_virt_to_bus(&vp->rx_ring[0]); /* Wrap the ring. */ + outl(isa_virt_to_bus(&vp->rx_ring[0]), ioaddr + UpListPtr); + } + if (vp->full_bus_master_tx) { /* Boomerang bus master Tx. */ + vp->cur_tx = vp->dirty_tx = 0; + outb(PKT_BUF_SZ >> 8, ioaddr + TxFreeThreshold); /* Room for a packet. */ + /* Clear the Tx ring. */ + for (i = 0; i < TX_RING_SIZE; i++) + vp->tx_skbuff[i] = NULL; + outl(0, ioaddr + DownListPtr); + } + /* Set receiver mode: presumably accept b-case and phys addr only. */ + set_rx_mode(dev); + outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */ + + netif_start_queue(dev); + + outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */ + outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */ + /* Allow status bits to be seen. */ + outw(SetStatusEnb | AdapterFailure | IntReq | StatsFull | + (vp->full_bus_master_tx ? DownComplete : TxAvailable) | + (vp->full_bus_master_rx ? UpComplete : RxComplete) | + (vp->bus_master ? DMADone : 0), ioaddr + EL3_CMD); + /* Ack all pending events, and set active indicator mask. */ + outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq, + ioaddr + EL3_CMD); + outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull + | (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete, + ioaddr + EL3_CMD); + + return 0; +} + +static void corkscrew_timer(unsigned long data) +{ +#ifdef AUTOMEDIA + struct net_device *dev = (struct net_device *) data; + struct corkscrew_private *vp = netdev_priv(dev); + int ioaddr = dev->base_addr; + unsigned long flags; + int ok = 0; + + if (corkscrew_debug > 1) + pr_debug("%s: Media selection timer tick happened, %s.\n", + dev->name, media_tbl[dev->if_port].name); + + spin_lock_irqsave(&vp->lock, flags); + + { + int old_window = inw(ioaddr + EL3_CMD) >> 13; + int media_status; + EL3WINDOW(4); + media_status = inw(ioaddr + Wn4_Media); + switch (dev->if_port) { + case 0: + case 4: + case 5: /* 10baseT, 100baseTX, 100baseFX */ + if (media_status & Media_LnkBeat) { + ok = 1; + if (corkscrew_debug > 1) + pr_debug("%s: Media %s has link beat, %x.\n", + dev->name, + media_tbl[dev->if_port].name, + media_status); + } else if (corkscrew_debug > 1) + pr_debug("%s: Media %s is has no link beat, %x.\n", + dev->name, + media_tbl[dev->if_port].name, + media_status); + + break; + default: /* Other media types handled by Tx timeouts. */ + if (corkscrew_debug > 1) + pr_debug("%s: Media %s is has no indication, %x.\n", + dev->name, + media_tbl[dev->if_port].name, + media_status); + ok = 1; + } + if (!ok) { + __u32 config; + + do { + dev->if_port = + media_tbl[dev->if_port].next; + } + while (!(vp->available_media & media_tbl[dev->if_port].mask)); + + if (dev->if_port == 8) { /* Go back to default. */ + dev->if_port = vp->default_media; + if (corkscrew_debug > 1) + pr_debug("%s: Media selection failing, using default %s port.\n", + dev->name, + media_tbl[dev->if_port].name); + } else { + if (corkscrew_debug > 1) + pr_debug("%s: Media selection failed, now trying %s port.\n", + dev->name, + media_tbl[dev->if_port].name); + vp->timer.expires = jiffies + media_tbl[dev->if_port].wait; + add_timer(&vp->timer); + } + outw((media_status & ~(Media_10TP | Media_SQE)) | + media_tbl[dev->if_port].media_bits, + ioaddr + Wn4_Media); + + EL3WINDOW(3); + config = inl(ioaddr + Wn3_Config); + config = (config & ~Xcvr) | (dev->if_port << Xcvr_shift); + outl(config, ioaddr + Wn3_Config); + + outw(dev->if_port == 3 ? StartCoax : StopCoax, + ioaddr + EL3_CMD); + } + EL3WINDOW(old_window); + } + + spin_unlock_irqrestore(&vp->lock, flags); + if (corkscrew_debug > 1) + pr_debug("%s: Media selection timer finished, %s.\n", + dev->name, media_tbl[dev->if_port].name); + +#endif /* AUTOMEDIA */ +} + +static void corkscrew_timeout(struct net_device *dev) +{ + int i; + struct corkscrew_private *vp = netdev_priv(dev); + int ioaddr = dev->base_addr; + + pr_warning("%s: transmit timed out, tx_status %2.2x status %4.4x.\n", + dev->name, inb(ioaddr + TxStatus), + inw(ioaddr + EL3_STATUS)); + /* Slight code bloat to be user friendly. */ + if ((inb(ioaddr + TxStatus) & 0x88) == 0x88) + pr_warning("%s: Transmitter encountered 16 collisions --" + " network cable problem?\n", dev->name); +#ifndef final_version + pr_debug(" Flags; bus-master %d, full %d; dirty %d current %d.\n", + vp->full_bus_master_tx, vp->tx_full, vp->dirty_tx, + vp->cur_tx); + pr_debug(" Down list %8.8x vs. %p.\n", inl(ioaddr + DownListPtr), + &vp->tx_ring[0]); + for (i = 0; i < TX_RING_SIZE; i++) { + pr_debug(" %d: %p length %8.8x status %8.8x\n", i, + &vp->tx_ring[i], + vp->tx_ring[i].length, vp->tx_ring[i].status); + } +#endif + /* Issue TX_RESET and TX_START commands. */ + outw(TxReset, ioaddr + EL3_CMD); + for (i = 20; i >= 0; i--) + if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress)) + break; + outw(TxEnable, ioaddr + EL3_CMD); + dev->trans_start = jiffies; /* prevent tx timeout */ + dev->stats.tx_errors++; + dev->stats.tx_dropped++; + netif_wake_queue(dev); +} + +static netdev_tx_t corkscrew_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct corkscrew_private *vp = netdev_priv(dev); + int ioaddr = dev->base_addr; + + /* Block a timer-based transmit from overlapping. */ + + netif_stop_queue(dev); + + if (vp->full_bus_master_tx) { /* BOOMERANG bus-master */ + /* Calculate the next Tx descriptor entry. */ + int entry = vp->cur_tx % TX_RING_SIZE; + struct boom_tx_desc *prev_entry; + unsigned long flags; + int i; + + if (vp->tx_full) /* No room to transmit with */ + return NETDEV_TX_BUSY; + if (vp->cur_tx != 0) + prev_entry = &vp->tx_ring[(vp->cur_tx - 1) % TX_RING_SIZE]; + else + prev_entry = NULL; + if (corkscrew_debug > 3) + pr_debug("%s: Trying to send a packet, Tx index %d.\n", + dev->name, vp->cur_tx); + /* vp->tx_full = 1; */ + vp->tx_skbuff[entry] = skb; + vp->tx_ring[entry].next = 0; + vp->tx_ring[entry].addr = isa_virt_to_bus(skb->data); + vp->tx_ring[entry].length = skb->len | 0x80000000; + vp->tx_ring[entry].status = skb->len | 0x80000000; + + spin_lock_irqsave(&vp->lock, flags); + outw(DownStall, ioaddr + EL3_CMD); + /* Wait for the stall to complete. */ + for (i = 20; i >= 0; i--) + if ((inw(ioaddr + EL3_STATUS) & CmdInProgress) == 0) + break; + if (prev_entry) + prev_entry->next = isa_virt_to_bus(&vp->tx_ring[entry]); + if (inl(ioaddr + DownListPtr) == 0) { + outl(isa_virt_to_bus(&vp->tx_ring[entry]), + ioaddr + DownListPtr); + queued_packet++; + } + outw(DownUnstall, ioaddr + EL3_CMD); + spin_unlock_irqrestore(&vp->lock, flags); + + vp->cur_tx++; + if (vp->cur_tx - vp->dirty_tx > TX_RING_SIZE - 1) + vp->tx_full = 1; + else { /* Clear previous interrupt enable. */ + if (prev_entry) + prev_entry->status &= ~0x80000000; + netif_wake_queue(dev); + } + return NETDEV_TX_OK; + } + /* Put out the doubleword header... */ + outl(skb->len, ioaddr + TX_FIFO); + dev->stats.tx_bytes += skb->len; +#ifdef VORTEX_BUS_MASTER + if (vp->bus_master) { + /* Set the bus-master controller to transfer the packet. */ + outl((int) (skb->data), ioaddr + Wn7_MasterAddr); + outw((skb->len + 3) & ~3, ioaddr + Wn7_MasterLen); + vp->tx_skb = skb; + outw(StartDMADown, ioaddr + EL3_CMD); + /* queue will be woken at the DMADone interrupt. */ + } else { + /* ... and the packet rounded to a doubleword. */ + outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2); + dev_kfree_skb(skb); + if (inw(ioaddr + TxFree) > 1536) { + netif_wake_queue(dev); + } else + /* Interrupt us when the FIFO has room for max-sized packet. */ + outw(SetTxThreshold + (1536 >> 2), + ioaddr + EL3_CMD); + } +#else + /* ... and the packet rounded to a doubleword. */ + outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2); + dev_kfree_skb(skb); + if (inw(ioaddr + TxFree) > 1536) { + netif_wake_queue(dev); + } else + /* Interrupt us when the FIFO has room for max-sized packet. */ + outw(SetTxThreshold + (1536 >> 2), ioaddr + EL3_CMD); +#endif /* bus master */ + + + /* Clear the Tx status stack. */ + { + short tx_status; + int i = 4; + + while (--i > 0 && (tx_status = inb(ioaddr + TxStatus)) > 0) { + if (tx_status & 0x3C) { /* A Tx-disabling error occurred. */ + if (corkscrew_debug > 2) + pr_debug("%s: Tx error, status %2.2x.\n", + dev->name, tx_status); + if (tx_status & 0x04) + dev->stats.tx_fifo_errors++; + if (tx_status & 0x38) + dev->stats.tx_aborted_errors++; + if (tx_status & 0x30) { + int j; + outw(TxReset, ioaddr + EL3_CMD); + for (j = 20; j >= 0; j--) + if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress)) + break; + } + outw(TxEnable, ioaddr + EL3_CMD); + } + outb(0x00, ioaddr + TxStatus); /* Pop the status stack. */ + } + } + return NETDEV_TX_OK; +} + +/* The interrupt handler does all of the Rx thread work and cleans up + after the Tx thread. */ + +static irqreturn_t corkscrew_interrupt(int irq, void *dev_id) +{ + /* Use the now-standard shared IRQ implementation. */ + struct net_device *dev = dev_id; + struct corkscrew_private *lp = netdev_priv(dev); + int ioaddr, status; + int latency; + int i = max_interrupt_work; + + ioaddr = dev->base_addr; + latency = inb(ioaddr + Timer); + + spin_lock(&lp->lock); + + status = inw(ioaddr + EL3_STATUS); + + if (corkscrew_debug > 4) + pr_debug("%s: interrupt, status %4.4x, timer %d.\n", + dev->name, status, latency); + if ((status & 0xE000) != 0xE000) { + static int donedidthis; + /* Some interrupt controllers store a bogus interrupt from boot-time. + Ignore a single early interrupt, but don't hang the machine for + other interrupt problems. */ + if (donedidthis++ > 100) { + pr_err("%s: Bogus interrupt, bailing. Status %4.4x, start=%d.\n", + dev->name, status, netif_running(dev)); + free_irq(dev->irq, dev); + dev->irq = -1; + } + } + + do { + if (corkscrew_debug > 5) + pr_debug("%s: In interrupt loop, status %4.4x.\n", + dev->name, status); + if (status & RxComplete) + corkscrew_rx(dev); + + if (status & TxAvailable) { + if (corkscrew_debug > 5) + pr_debug(" TX room bit was handled.\n"); + /* There's room in the FIFO for a full-sized packet. */ + outw(AckIntr | TxAvailable, ioaddr + EL3_CMD); + netif_wake_queue(dev); + } + if (status & DownComplete) { + unsigned int dirty_tx = lp->dirty_tx; + + while (lp->cur_tx - dirty_tx > 0) { + int entry = dirty_tx % TX_RING_SIZE; + if (inl(ioaddr + DownListPtr) == isa_virt_to_bus(&lp->tx_ring[entry])) + break; /* It still hasn't been processed. */ + if (lp->tx_skbuff[entry]) { + dev_kfree_skb_irq(lp->tx_skbuff[entry]); + lp->tx_skbuff[entry] = NULL; + } + dirty_tx++; + } + lp->dirty_tx = dirty_tx; + outw(AckIntr | DownComplete, ioaddr + EL3_CMD); + if (lp->tx_full && (lp->cur_tx - dirty_tx <= TX_RING_SIZE - 1)) { + lp->tx_full = 0; + netif_wake_queue(dev); + } + } +#ifdef VORTEX_BUS_MASTER + if (status & DMADone) { + outw(0x1000, ioaddr + Wn7_MasterStatus); /* Ack the event. */ + dev_kfree_skb_irq(lp->tx_skb); /* Release the transferred buffer */ + netif_wake_queue(dev); + } +#endif + if (status & UpComplete) { + boomerang_rx(dev); + outw(AckIntr | UpComplete, ioaddr + EL3_CMD); + } + if (status & (AdapterFailure | RxEarly | StatsFull)) { + /* Handle all uncommon interrupts at once. */ + if (status & RxEarly) { /* Rx early is unused. */ + corkscrew_rx(dev); + outw(AckIntr | RxEarly, ioaddr + EL3_CMD); + } + if (status & StatsFull) { /* Empty statistics. */ + static int DoneDidThat; + if (corkscrew_debug > 4) + pr_debug("%s: Updating stats.\n", dev->name); + update_stats(ioaddr, dev); + /* DEBUG HACK: Disable statistics as an interrupt source. */ + /* This occurs when we have the wrong media type! */ + if (DoneDidThat == 0 && inw(ioaddr + EL3_STATUS) & StatsFull) { + int win, reg; + pr_notice("%s: Updating stats failed, disabling stats as an interrupt source.\n", + dev->name); + for (win = 0; win < 8; win++) { + EL3WINDOW(win); + pr_notice("Vortex window %d:", win); + for (reg = 0; reg < 16; reg++) + pr_cont(" %2.2x", inb(ioaddr + reg)); + pr_cont("\n"); + } + EL3WINDOW(7); + outw(SetIntrEnb | TxAvailable | + RxComplete | AdapterFailure | + UpComplete | DownComplete | + TxComplete, ioaddr + EL3_CMD); + DoneDidThat++; + } + } + if (status & AdapterFailure) { + /* Adapter failure requires Rx reset and reinit. */ + outw(RxReset, ioaddr + EL3_CMD); + /* Set the Rx filter to the current state. */ + set_rx_mode(dev); + outw(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */ + outw(AckIntr | AdapterFailure, + ioaddr + EL3_CMD); + } + } + + if (--i < 0) { + pr_err("%s: Too much work in interrupt, status %4.4x. Disabling functions (%4.4x).\n", + dev->name, status, SetStatusEnb | ((~status) & 0x7FE)); + /* Disable all pending interrupts. */ + outw(SetStatusEnb | ((~status) & 0x7FE), ioaddr + EL3_CMD); + outw(AckIntr | 0x7FF, ioaddr + EL3_CMD); + break; + } + /* Acknowledge the IRQ. */ + outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); + + } while ((status = inw(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete)); + + spin_unlock(&lp->lock); + + if (corkscrew_debug > 4) + pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name, status); + return IRQ_HANDLED; +} + +static int corkscrew_rx(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + int i; + short rx_status; + + if (corkscrew_debug > 5) + pr_debug(" In rx_packet(), status %4.4x, rx_status %4.4x.\n", + inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus)); + while ((rx_status = inw(ioaddr + RxStatus)) > 0) { + if (rx_status & 0x4000) { /* Error, update stats. */ + unsigned char rx_error = inb(ioaddr + RxErrors); + if (corkscrew_debug > 2) + pr_debug(" Rx error: status %2.2x.\n", + rx_error); + dev->stats.rx_errors++; + if (rx_error & 0x01) + dev->stats.rx_over_errors++; + if (rx_error & 0x02) + dev->stats.rx_length_errors++; + if (rx_error & 0x04) + dev->stats.rx_frame_errors++; + if (rx_error & 0x08) + dev->stats.rx_crc_errors++; + if (rx_error & 0x10) + dev->stats.rx_length_errors++; + } else { + /* The packet length: up to 4.5K!. */ + short pkt_len = rx_status & 0x1fff; + struct sk_buff *skb; + + skb = dev_alloc_skb(pkt_len + 5 + 2); + if (corkscrew_debug > 4) + pr_debug("Receiving packet size %d status %4.4x.\n", + pkt_len, rx_status); + if (skb != NULL) { + skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ + /* 'skb_put()' points to the start of sk_buff data area. */ + insl(ioaddr + RX_FIFO, + skb_put(skb, pkt_len), + (pkt_len + 3) >> 2); + outw(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */ + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; + /* Wait a limited time to go to next packet. */ + for (i = 200; i >= 0; i--) + if (! (inw(ioaddr + EL3_STATUS) & CmdInProgress)) + break; + continue; + } else if (corkscrew_debug) + pr_debug("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, pkt_len); + } + outw(RxDiscard, ioaddr + EL3_CMD); + dev->stats.rx_dropped++; + /* Wait a limited time to skip this packet. */ + for (i = 200; i >= 0; i--) + if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress)) + break; + } + return 0; +} + +static int boomerang_rx(struct net_device *dev) +{ + struct corkscrew_private *vp = netdev_priv(dev); + int entry = vp->cur_rx % RX_RING_SIZE; + int ioaddr = dev->base_addr; + int rx_status; + + if (corkscrew_debug > 5) + pr_debug(" In boomerang_rx(), status %4.4x, rx_status %4.4x.\n", + inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus)); + while ((rx_status = vp->rx_ring[entry].status) & RxDComplete) { + if (rx_status & RxDError) { /* Error, update stats. */ + unsigned char rx_error = rx_status >> 16; + if (corkscrew_debug > 2) + pr_debug(" Rx error: status %2.2x.\n", + rx_error); + dev->stats.rx_errors++; + if (rx_error & 0x01) + dev->stats.rx_over_errors++; + if (rx_error & 0x02) + dev->stats.rx_length_errors++; + if (rx_error & 0x04) + dev->stats.rx_frame_errors++; + if (rx_error & 0x08) + dev->stats.rx_crc_errors++; + if (rx_error & 0x10) + dev->stats.rx_length_errors++; + } else { + /* The packet length: up to 4.5K!. */ + short pkt_len = rx_status & 0x1fff; + struct sk_buff *skb; + + dev->stats.rx_bytes += pkt_len; + if (corkscrew_debug > 4) + pr_debug("Receiving packet size %d status %4.4x.\n", + pkt_len, rx_status); + + /* Check if the packet is long enough to just accept without + copying to a properly sized skbuff. */ + if (pkt_len < rx_copybreak && + (skb = dev_alloc_skb(pkt_len + 4)) != NULL) { + skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ + /* 'skb_put()' points to the start of sk_buff data area. */ + memcpy(skb_put(skb, pkt_len), + isa_bus_to_virt(vp->rx_ring[entry]. + addr), pkt_len); + rx_copy++; + } else { + void *temp; + /* Pass up the skbuff already on the Rx ring. */ + skb = vp->rx_skbuff[entry]; + vp->rx_skbuff[entry] = NULL; + temp = skb_put(skb, pkt_len); + /* Remove this checking code for final release. */ + if (isa_bus_to_virt(vp->rx_ring[entry].addr) != temp) + pr_warning("%s: Warning -- the skbuff addresses do not match" + " in boomerang_rx: %p vs. %p / %p.\n", + dev->name, + isa_bus_to_virt(vp-> + rx_ring[entry]. + addr), skb->head, + temp); + rx_nocopy++; + } + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->stats.rx_packets++; + } + entry = (++vp->cur_rx) % RX_RING_SIZE; + } + /* Refill the Rx ring buffers. */ + for (; vp->cur_rx - vp->dirty_rx > 0; vp->dirty_rx++) { + struct sk_buff *skb; + entry = vp->dirty_rx % RX_RING_SIZE; + if (vp->rx_skbuff[entry] == NULL) { + skb = dev_alloc_skb(PKT_BUF_SZ); + if (skb == NULL) + break; /* Bad news! */ + skb->dev = dev; /* Mark as being used by this device. */ + skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ + vp->rx_ring[entry].addr = isa_virt_to_bus(skb->data); + vp->rx_skbuff[entry] = skb; + } + vp->rx_ring[entry].status = 0; /* Clear complete bit. */ + } + return 0; +} + +static int corkscrew_close(struct net_device *dev) +{ + struct corkscrew_private *vp = netdev_priv(dev); + int ioaddr = dev->base_addr; + int i; + + netif_stop_queue(dev); + + if (corkscrew_debug > 1) { + pr_debug("%s: corkscrew_close() status %4.4x, Tx status %2.2x.\n", + dev->name, inw(ioaddr + EL3_STATUS), + inb(ioaddr + TxStatus)); + pr_debug("%s: corkscrew close stats: rx_nocopy %d rx_copy %d tx_queued %d.\n", + dev->name, rx_nocopy, rx_copy, queued_packet); + } + + del_timer(&vp->timer); + + /* Turn off statistics ASAP. We update lp->stats below. */ + outw(StatsDisable, ioaddr + EL3_CMD); + + /* Disable the receiver and transmitter. */ + outw(RxDisable, ioaddr + EL3_CMD); + outw(TxDisable, ioaddr + EL3_CMD); + + if (dev->if_port == XCVR_10base2) + /* Turn off thinnet power. Green! */ + outw(StopCoax, ioaddr + EL3_CMD); + + free_irq(dev->irq, dev); + + outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD); + + update_stats(ioaddr, dev); + if (vp->full_bus_master_rx) { /* Free Boomerang bus master Rx buffers. */ + outl(0, ioaddr + UpListPtr); + for (i = 0; i < RX_RING_SIZE; i++) + if (vp->rx_skbuff[i]) { + dev_kfree_skb(vp->rx_skbuff[i]); + vp->rx_skbuff[i] = NULL; + } + } + if (vp->full_bus_master_tx) { /* Free Boomerang bus master Tx buffers. */ + outl(0, ioaddr + DownListPtr); + for (i = 0; i < TX_RING_SIZE; i++) + if (vp->tx_skbuff[i]) { + dev_kfree_skb(vp->tx_skbuff[i]); + vp->tx_skbuff[i] = NULL; + } + } + + return 0; +} + +static struct net_device_stats *corkscrew_get_stats(struct net_device *dev) +{ + struct corkscrew_private *vp = netdev_priv(dev); + unsigned long flags; + + if (netif_running(dev)) { + spin_lock_irqsave(&vp->lock, flags); + update_stats(dev->base_addr, dev); + spin_unlock_irqrestore(&vp->lock, flags); + } + return &dev->stats; +} + +/* Update statistics. + Unlike with the EL3 we need not worry about interrupts changing + the window setting from underneath us, but we must still guard + against a race condition with a StatsUpdate interrupt updating the + table. This is done by checking that the ASM (!) code generated uses + atomic updates with '+='. + */ +static void update_stats(int ioaddr, struct net_device *dev) +{ + /* Unlike the 3c5x9 we need not turn off stats updates while reading. */ + /* Switch to the stats window, and read everything. */ + EL3WINDOW(6); + dev->stats.tx_carrier_errors += inb(ioaddr + 0); + dev->stats.tx_heartbeat_errors += inb(ioaddr + 1); + /* Multiple collisions. */ inb(ioaddr + 2); + dev->stats.collisions += inb(ioaddr + 3); + dev->stats.tx_window_errors += inb(ioaddr + 4); + dev->stats.rx_fifo_errors += inb(ioaddr + 5); + dev->stats.tx_packets += inb(ioaddr + 6); + dev->stats.tx_packets += (inb(ioaddr + 9) & 0x30) << 4; + /* Rx packets */ inb(ioaddr + 7); + /* Must read to clear */ + /* Tx deferrals */ inb(ioaddr + 8); + /* Don't bother with register 9, an extension of registers 6&7. + If we do use the 6&7 values the atomic update assumption above + is invalid. */ + inw(ioaddr + 10); /* Total Rx and Tx octets. */ + inw(ioaddr + 12); + /* New: On the Vortex we must also clear the BadSSD counter. */ + EL3WINDOW(4); + inb(ioaddr + 12); + + /* We change back to window 7 (not 1) with the Vortex. */ + EL3WINDOW(7); +} + +/* This new version of set_rx_mode() supports v1.4 kernels. + The Vortex chip has no documented multicast filter, so the only + multicast setting is to receive all multicast frames. At least + the chip has a very clean way to set the mode, unlike many others. */ +static void set_rx_mode(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + short new_mode; + + if (dev->flags & IFF_PROMISC) { + if (corkscrew_debug > 3) + pr_debug("%s: Setting promiscuous mode.\n", + dev->name); + new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm; + } else if (!netdev_mc_empty(dev) || dev->flags & IFF_ALLMULTI) { + new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast; + } else + new_mode = SetRxFilter | RxStation | RxBroadcast; + + outw(new_mode, ioaddr + EL3_CMD); +} + +static void netdev_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr); +} + +static u32 netdev_get_msglevel(struct net_device *dev) +{ + return corkscrew_debug; +} + +static void netdev_set_msglevel(struct net_device *dev, u32 level) +{ + corkscrew_debug = level; +} + +static const struct ethtool_ops netdev_ethtool_ops = { + .get_drvinfo = netdev_get_drvinfo, + .get_msglevel = netdev_get_msglevel, + .set_msglevel = netdev_set_msglevel, +}; + + +#ifdef MODULE +void cleanup_module(void) +{ + while (!list_empty(&root_corkscrew_dev)) { + struct net_device *dev; + struct corkscrew_private *vp; + + vp = list_entry(root_corkscrew_dev.next, + struct corkscrew_private, list); + dev = vp->our_dev; + unregister_netdev(dev); + cleanup_card(dev); + free_netdev(dev); + } +} +#endif /* MODULE */ diff --git a/drivers/net/ethernet/3com/3c574_cs.c b/drivers/net/ethernet/3com/3c574_cs.c new file mode 100644 index 000000000000..34c5e1cbf65d --- /dev/null +++ b/drivers/net/ethernet/3com/3c574_cs.c @@ -0,0 +1,1181 @@ +/* 3c574.c: A PCMCIA ethernet driver for the 3com 3c574 "RoadRunner". + + Written 1993-1998 by + Donald Becker, becker@scyld.com, (driver core) and + David Hinds, dahinds@users.sourceforge.net (from his PC card code). + Locking fixes (C) Copyright 2003 Red Hat Inc + + This software may be used and distributed according to the terms of + the GNU General Public License, incorporated herein by reference. + + This driver derives from Donald Becker's 3c509 core, which has the + following copyright: + Copyright 1993 United States Government as represented by the + Director, National Security Agency. + + +*/ + +/* + Theory of Operation + +I. Board Compatibility + +This device driver is designed for the 3Com 3c574 PC card Fast Ethernet +Adapter. + +II. Board-specific settings + +None -- PC cards are autoconfigured. + +III. Driver operation + +The 3c574 uses a Boomerang-style interface, without the bus-master capability. +See the Boomerang driver and documentation for most details. + +IV. Notes and chip documentation. + +Two added registers are used to enhance PIO performance, RunnerRdCtrl and +RunnerWrCtrl. These are 11 bit down-counters that are preloaded with the +count of word (16 bits) reads or writes the driver is about to do to the Rx +or Tx FIFO. The chip is then able to hide the internal-PCI-bus to PC-card +translation latency by buffering the I/O operations with an 8 word FIFO. +Note: No other chip accesses are permitted when this buffer is used. + +A second enhancement is that both attribute and common memory space +0x0800-0x0fff can translated to the PIO FIFO. Thus memory operations (faster +with *some* PCcard bridges) may be used instead of I/O operations. +This is enabled by setting the 0x10 bit in the PCMCIA LAN COR. + +Some slow PC card bridges work better if they never see a WAIT signal. +This is configured by setting the 0x20 bit in the PCMCIA LAN COR. +Only do this after testing that it is reliable and improves performance. + +The upper five bits of RunnerRdCtrl are used to window into PCcard +configuration space registers. Window 0 is the regular Boomerang/Odie +register set, 1-5 are various PC card control registers, and 16-31 are +the (reversed!) CIS table. + +A final note: writing the InternalConfig register in window 3 with an +invalid ramWidth is Very Bad. + +V. References + +http://www.scyld.com/expert/NWay.html +http://www.national.com/opf/DP/DP83840A.html + +Thanks to Terry Murphy of 3Com for providing development information for +earlier 3Com products. + +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> +#include <linux/bitops.h> +#include <linux/mii.h> + +#include <pcmcia/cistpl.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/ciscode.h> +#include <pcmcia/ds.h> + +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/system.h> + +/*====================================================================*/ + +/* Module parameters */ + +MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>"); +MODULE_DESCRIPTION("3Com 3c574 series PCMCIA ethernet driver"); +MODULE_LICENSE("GPL"); + +#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) + +/* Maximum events (Rx packets, etc.) to handle at each interrupt. */ +INT_MODULE_PARM(max_interrupt_work, 32); + +/* Force full duplex modes? */ +INT_MODULE_PARM(full_duplex, 0); + +/* Autodetect link polarity reversal? */ +INT_MODULE_PARM(auto_polarity, 1); + + +/*====================================================================*/ + +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT ((800*HZ)/1000) + +/* To minimize the size of the driver source and make the driver more + readable not all constants are symbolically defined. + You'll need the manual if you want to understand driver details anyway. */ +/* Offsets from base I/O address. */ +#define EL3_DATA 0x00 +#define EL3_CMD 0x0e +#define EL3_STATUS 0x0e + +#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD) + +/* The top five bits written to EL3_CMD are a command, the lower + 11 bits are the parameter, if applicable. */ +enum el3_cmds { + TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11, + RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, RxDiscard = 8<<11, + TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11, + FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11, + SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11, + SetTxThreshold = 18<<11, SetTxStart = 19<<11, StatsEnable = 21<<11, + StatsDisable = 22<<11, StopCoax = 23<<11, +}; + +enum elxl_status { + IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004, + TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020, + IntReq = 0x0040, StatsFull = 0x0080, CmdBusy = 0x1000 }; + +/* The SetRxFilter command accepts the following classes: */ +enum RxFilter { + RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 +}; + +enum Window0 { + Wn0EepromCmd = 10, Wn0EepromData = 12, /* EEPROM command/address, data. */ + IntrStatus=0x0E, /* Valid in all windows. */ +}; +/* These assumes the larger EEPROM. */ +enum Win0_EEPROM_cmds { + EEPROM_Read = 0x200, EEPROM_WRITE = 0x100, EEPROM_ERASE = 0x300, + EEPROM_EWENB = 0x30, /* Enable erasing/writing for 10 msec. */ + EEPROM_EWDIS = 0x00, /* Disable EWENB before 10 msec timeout. */ +}; + +/* Register window 1 offsets, the window used in normal operation. + On the "Odie" this window is always mapped at offsets 0x10-0x1f. + Except for TxFree, which is overlapped by RunnerWrCtrl. */ +enum Window1 { + TX_FIFO = 0x10, RX_FIFO = 0x10, RxErrors = 0x14, + RxStatus = 0x18, Timer=0x1A, TxStatus = 0x1B, + TxFree = 0x0C, /* Remaining free bytes in Tx buffer. */ + RunnerRdCtrl = 0x16, RunnerWrCtrl = 0x1c, +}; + +enum Window3 { /* Window 3: MAC/config bits. */ + Wn3_Config=0, Wn3_MAC_Ctrl=6, Wn3_Options=8, +}; +enum wn3_config { + Ram_size = 7, + Ram_width = 8, + Ram_speed = 0x30, + Rom_size = 0xc0, + Ram_split_shift = 16, + Ram_split = 3 << Ram_split_shift, + Xcvr_shift = 20, + Xcvr = 7 << Xcvr_shift, + Autoselect = 0x1000000, +}; + +enum Window4 { /* Window 4: Xcvr/media bits. */ + Wn4_FIFODiag = 4, Wn4_NetDiag = 6, Wn4_PhysicalMgmt=8, Wn4_Media = 10, +}; + +#define MEDIA_TP 0x00C0 /* Enable link beat and jabber for 10baseT. */ + +struct el3_private { + struct pcmcia_device *p_dev; + u16 advertising, partner; /* NWay media advertisement */ + unsigned char phys; /* MII device address */ + unsigned int autoselect:1, default_media:3; /* Read from the EEPROM/Wn3_Config. */ + /* for transceiver monitoring */ + struct timer_list media; + unsigned short media_status; + unsigned short fast_poll; + unsigned long last_irq; + spinlock_t window_lock; /* Guards the Window selection */ +}; + +/* Set iff a MII transceiver on any interface requires mdio preamble. + This only set with the original DP83840 on older 3c905 boards, so the extra + code size of a per-interface flag is not worthwhile. */ +static char mii_preamble_required = 0; + +/* Index of functions. */ + +static int tc574_config(struct pcmcia_device *link); +static void tc574_release(struct pcmcia_device *link); + +static void mdio_sync(unsigned int ioaddr, int bits); +static int mdio_read(unsigned int ioaddr, int phy_id, int location); +static void mdio_write(unsigned int ioaddr, int phy_id, int location, + int value); +static unsigned short read_eeprom(unsigned int ioaddr, int index); +static void tc574_wait_for_completion(struct net_device *dev, int cmd); + +static void tc574_reset(struct net_device *dev); +static void media_check(unsigned long arg); +static int el3_open(struct net_device *dev); +static netdev_tx_t el3_start_xmit(struct sk_buff *skb, + struct net_device *dev); +static irqreturn_t el3_interrupt(int irq, void *dev_id); +static void update_stats(struct net_device *dev); +static struct net_device_stats *el3_get_stats(struct net_device *dev); +static int el3_rx(struct net_device *dev, int worklimit); +static int el3_close(struct net_device *dev); +static void el3_tx_timeout(struct net_device *dev); +static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static void set_rx_mode(struct net_device *dev); +static void set_multicast_list(struct net_device *dev); + +static void tc574_detach(struct pcmcia_device *p_dev); + +/* + tc574_attach() creates an "instance" of the driver, allocating + local data structures for one device. The device is registered + with Card Services. +*/ +static const struct net_device_ops el3_netdev_ops = { + .ndo_open = el3_open, + .ndo_stop = el3_close, + .ndo_start_xmit = el3_start_xmit, + .ndo_tx_timeout = el3_tx_timeout, + .ndo_get_stats = el3_get_stats, + .ndo_do_ioctl = el3_ioctl, + .ndo_set_multicast_list = set_multicast_list, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + +static int tc574_probe(struct pcmcia_device *link) +{ + struct el3_private *lp; + struct net_device *dev; + + dev_dbg(&link->dev, "3c574_attach()\n"); + + /* Create the PC card device object. */ + dev = alloc_etherdev(sizeof(struct el3_private)); + if (!dev) + return -ENOMEM; + lp = netdev_priv(dev); + link->priv = dev; + lp->p_dev = link; + + spin_lock_init(&lp->window_lock); + link->resource[0]->end = 32; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 1; + + dev->netdev_ops = &el3_netdev_ops; + dev->watchdog_timeo = TX_TIMEOUT; + + return tc574_config(link); +} + +static void tc574_detach(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + + dev_dbg(&link->dev, "3c574_detach()\n"); + + unregister_netdev(dev); + + tc574_release(link); + + free_netdev(dev); +} /* tc574_detach */ + +static const char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"}; + +static int tc574_config(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + struct el3_private *lp = netdev_priv(dev); + int ret, i, j; + unsigned int ioaddr; + __be16 *phys_addr; + char *cardname; + __u32 config; + u8 *buf; + size_t len; + + phys_addr = (__be16 *)dev->dev_addr; + + dev_dbg(&link->dev, "3c574_config()\n"); + + link->io_lines = 16; + + for (i = j = 0; j < 0x400; j += 0x20) { + link->resource[0]->start = j ^ 0x300; + i = pcmcia_request_io(link); + if (i == 0) + break; + } + if (i != 0) + goto failed; + + ret = pcmcia_request_irq(link, el3_interrupt); + if (ret) + goto failed; + + ret = pcmcia_enable_device(link); + if (ret) + goto failed; + + dev->irq = link->irq; + dev->base_addr = link->resource[0]->start; + + ioaddr = dev->base_addr; + + /* The 3c574 normally uses an EEPROM for configuration info, including + the hardware address. The future products may include a modem chip + and put the address in the CIS. */ + + len = pcmcia_get_tuple(link, 0x88, &buf); + if (buf && len >= 6) { + for (i = 0; i < 3; i++) + phys_addr[i] = htons(le16_to_cpu(buf[i * 2])); + kfree(buf); + } else { + kfree(buf); /* 0 < len < 6 */ + EL3WINDOW(0); + for (i = 0; i < 3; i++) + phys_addr[i] = htons(read_eeprom(ioaddr, i + 10)); + if (phys_addr[0] == htons(0x6060)) { + pr_notice("IO port conflict at 0x%03lx-0x%03lx\n", + dev->base_addr, dev->base_addr+15); + goto failed; + } + } + if (link->prod_id[1]) + cardname = link->prod_id[1]; + else + cardname = "3Com 3c574"; + + { + u_char mcr; + outw(2<<11, ioaddr + RunnerRdCtrl); + mcr = inb(ioaddr + 2); + outw(0<<11, ioaddr + RunnerRdCtrl); + pr_info(" ASIC rev %d,", mcr>>3); + EL3WINDOW(3); + config = inl(ioaddr + Wn3_Config); + lp->default_media = (config & Xcvr) >> Xcvr_shift; + lp->autoselect = config & Autoselect ? 1 : 0; + } + + init_timer(&lp->media); + + { + int phy; + + /* Roadrunner only: Turn on the MII transceiver */ + outw(0x8040, ioaddr + Wn3_Options); + mdelay(1); + outw(0xc040, ioaddr + Wn3_Options); + tc574_wait_for_completion(dev, TxReset); + tc574_wait_for_completion(dev, RxReset); + mdelay(1); + outw(0x8040, ioaddr + Wn3_Options); + + EL3WINDOW(4); + for (phy = 1; phy <= 32; phy++) { + int mii_status; + mdio_sync(ioaddr, 32); + mii_status = mdio_read(ioaddr, phy & 0x1f, 1); + if (mii_status != 0xffff) { + lp->phys = phy & 0x1f; + dev_dbg(&link->dev, " MII transceiver at " + "index %d, status %x.\n", + phy, mii_status); + if ((mii_status & 0x0040) == 0) + mii_preamble_required = 1; + break; + } + } + if (phy > 32) { + pr_notice(" No MII transceivers found!\n"); + goto failed; + } + i = mdio_read(ioaddr, lp->phys, 16) | 0x40; + mdio_write(ioaddr, lp->phys, 16, i); + lp->advertising = mdio_read(ioaddr, lp->phys, 4); + if (full_duplex) { + /* Only advertise the FD media types. */ + lp->advertising &= ~0x02a0; + mdio_write(ioaddr, lp->phys, 4, lp->advertising); + } + } + + SET_NETDEV_DEV(dev, &link->dev); + + if (register_netdev(dev) != 0) { + pr_notice("register_netdev() failed\n"); + goto failed; + } + + netdev_info(dev, "%s at io %#3lx, irq %d, hw_addr %pM\n", + cardname, dev->base_addr, dev->irq, dev->dev_addr); + netdev_info(dev, " %dK FIFO split %s Rx:Tx, %sMII interface.\n", + 8 << config & Ram_size, + ram_split[(config & Ram_split) >> Ram_split_shift], + config & Autoselect ? "autoselect " : ""); + + return 0; + +failed: + tc574_release(link); + return -ENODEV; + +} /* tc574_config */ + +static void tc574_release(struct pcmcia_device *link) +{ + pcmcia_disable_device(link); +} + +static int tc574_suspend(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + + if (link->open) + netif_device_detach(dev); + + return 0; +} + +static int tc574_resume(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + + if (link->open) { + tc574_reset(dev); + netif_device_attach(dev); + } + + return 0; +} + +static void dump_status(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + EL3WINDOW(1); + netdev_info(dev, " irq status %04x, rx status %04x, tx status %02x, tx free %04x\n", + inw(ioaddr+EL3_STATUS), + inw(ioaddr+RxStatus), inb(ioaddr+TxStatus), + inw(ioaddr+TxFree)); + EL3WINDOW(4); + netdev_info(dev, " diagnostics: fifo %04x net %04x ethernet %04x media %04x\n", + inw(ioaddr+0x04), inw(ioaddr+0x06), + inw(ioaddr+0x08), inw(ioaddr+0x0a)); + EL3WINDOW(1); +} + +/* + Use this for commands that may take time to finish +*/ +static void tc574_wait_for_completion(struct net_device *dev, int cmd) +{ + int i = 1500; + outw(cmd, dev->base_addr + EL3_CMD); + while (--i > 0) + if (!(inw(dev->base_addr + EL3_STATUS) & 0x1000)) break; + if (i == 0) + netdev_notice(dev, "command 0x%04x did not complete!\n", cmd); +} + +/* Read a word from the EEPROM using the regular EEPROM access register. + Assume that we are in register window zero. + */ +static unsigned short read_eeprom(unsigned int ioaddr, int index) +{ + int timer; + outw(EEPROM_Read + index, ioaddr + Wn0EepromCmd); + /* Pause for at least 162 usec for the read to take place. */ + for (timer = 1620; timer >= 0; timer--) { + if ((inw(ioaddr + Wn0EepromCmd) & 0x8000) == 0) + break; + } + return inw(ioaddr + Wn0EepromData); +} + +/* MII transceiver control section. + Read and write the MII registers using software-generated serial + MDIO protocol. See the MII specifications or DP83840A data sheet + for details. + The maxium data clock rate is 2.5 Mhz. The timing is easily met by the + slow PC card interface. */ + +#define MDIO_SHIFT_CLK 0x01 +#define MDIO_DIR_WRITE 0x04 +#define MDIO_DATA_WRITE0 (0x00 | MDIO_DIR_WRITE) +#define MDIO_DATA_WRITE1 (0x02 | MDIO_DIR_WRITE) +#define MDIO_DATA_READ 0x02 +#define MDIO_ENB_IN 0x00 + +/* Generate the preamble required for initial synchronization and + a few older transceivers. */ +static void mdio_sync(unsigned int ioaddr, int bits) +{ + unsigned int mdio_addr = ioaddr + Wn4_PhysicalMgmt; + + /* Establish sync by sending at least 32 logic ones. */ + while (-- bits >= 0) { + outw(MDIO_DATA_WRITE1, mdio_addr); + outw(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr); + } +} + +static int mdio_read(unsigned int ioaddr, int phy_id, int location) +{ + int i; + int read_cmd = (0xf6 << 10) | (phy_id << 5) | location; + unsigned int retval = 0; + unsigned int mdio_addr = ioaddr + Wn4_PhysicalMgmt; + + if (mii_preamble_required) + mdio_sync(ioaddr, 32); + + /* Shift the read command bits out. */ + for (i = 14; i >= 0; i--) { + int dataval = (read_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; + outw(dataval, mdio_addr); + outw(dataval | MDIO_SHIFT_CLK, mdio_addr); + } + /* Read the two transition, 16 data, and wire-idle bits. */ + for (i = 19; i > 0; i--) { + outw(MDIO_ENB_IN, mdio_addr); + retval = (retval << 1) | ((inw(mdio_addr) & MDIO_DATA_READ) ? 1 : 0); + outw(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr); + } + return (retval>>1) & 0xffff; +} + +static void mdio_write(unsigned int ioaddr, int phy_id, int location, int value) +{ + int write_cmd = 0x50020000 | (phy_id << 23) | (location << 18) | value; + unsigned int mdio_addr = ioaddr + Wn4_PhysicalMgmt; + int i; + + if (mii_preamble_required) + mdio_sync(ioaddr, 32); + + /* Shift the command bits out. */ + for (i = 31; i >= 0; i--) { + int dataval = (write_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; + outw(dataval, mdio_addr); + outw(dataval | MDIO_SHIFT_CLK, mdio_addr); + } + /* Leave the interface idle. */ + for (i = 1; i >= 0; i--) { + outw(MDIO_ENB_IN, mdio_addr); + outw(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr); + } +} + +/* Reset and restore all of the 3c574 registers. */ +static void tc574_reset(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + int i; + unsigned int ioaddr = dev->base_addr; + unsigned long flags; + + tc574_wait_for_completion(dev, TotalReset|0x10); + + spin_lock_irqsave(&lp->window_lock, flags); + /* Clear any transactions in progress. */ + outw(0, ioaddr + RunnerWrCtrl); + outw(0, ioaddr + RunnerRdCtrl); + + /* Set the station address and mask. */ + EL3WINDOW(2); + for (i = 0; i < 6; i++) + outb(dev->dev_addr[i], ioaddr + i); + for (; i < 12; i+=2) + outw(0, ioaddr + i); + + /* Reset config options */ + EL3WINDOW(3); + outb((dev->mtu > 1500 ? 0x40 : 0), ioaddr + Wn3_MAC_Ctrl); + outl((lp->autoselect ? 0x01000000 : 0) | 0x0062001b, + ioaddr + Wn3_Config); + /* Roadrunner only: Turn on the MII transceiver. */ + outw(0x8040, ioaddr + Wn3_Options); + mdelay(1); + outw(0xc040, ioaddr + Wn3_Options); + EL3WINDOW(1); + spin_unlock_irqrestore(&lp->window_lock, flags); + + tc574_wait_for_completion(dev, TxReset); + tc574_wait_for_completion(dev, RxReset); + mdelay(1); + spin_lock_irqsave(&lp->window_lock, flags); + EL3WINDOW(3); + outw(0x8040, ioaddr + Wn3_Options); + + /* Switch to the stats window, and clear all stats by reading. */ + outw(StatsDisable, ioaddr + EL3_CMD); + EL3WINDOW(6); + for (i = 0; i < 10; i++) + inb(ioaddr + i); + inw(ioaddr + 10); + inw(ioaddr + 12); + EL3WINDOW(4); + inb(ioaddr + 12); + inb(ioaddr + 13); + + /* .. enable any extra statistics bits.. */ + outw(0x0040, ioaddr + Wn4_NetDiag); + + EL3WINDOW(1); + spin_unlock_irqrestore(&lp->window_lock, flags); + + /* .. re-sync MII and re-fill what NWay is advertising. */ + mdio_sync(ioaddr, 32); + mdio_write(ioaddr, lp->phys, 4, lp->advertising); + if (!auto_polarity) { + /* works for TDK 78Q2120 series MII's */ + i = mdio_read(ioaddr, lp->phys, 16) | 0x20; + mdio_write(ioaddr, lp->phys, 16, i); + } + + spin_lock_irqsave(&lp->window_lock, flags); + /* Switch to register set 1 for normal use, just for TxFree. */ + set_rx_mode(dev); + spin_unlock_irqrestore(&lp->window_lock, flags); + outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */ + outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */ + outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */ + /* Allow status bits to be seen. */ + outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD); + /* Ack all pending events, and set active indicator mask. */ + outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq, + ioaddr + EL3_CMD); + outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull + | AdapterFailure | RxEarly, ioaddr + EL3_CMD); +} + +static int el3_open(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + struct pcmcia_device *link = lp->p_dev; + + if (!pcmcia_dev_present(link)) + return -ENODEV; + + link->open++; + netif_start_queue(dev); + + tc574_reset(dev); + lp->media.function = media_check; + lp->media.data = (unsigned long) dev; + lp->media.expires = jiffies + HZ; + add_timer(&lp->media); + + dev_dbg(&link->dev, "%s: opened, status %4.4x.\n", + dev->name, inw(dev->base_addr + EL3_STATUS)); + + return 0; +} + +static void el3_tx_timeout(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + + netdev_notice(dev, "Transmit timed out!\n"); + dump_status(dev); + dev->stats.tx_errors++; + dev->trans_start = jiffies; /* prevent tx timeout */ + /* Issue TX_RESET and TX_START commands. */ + tc574_wait_for_completion(dev, TxReset); + outw(TxEnable, ioaddr + EL3_CMD); + netif_wake_queue(dev); +} + +static void pop_tx_status(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + int i; + + /* Clear the Tx status stack. */ + for (i = 32; i > 0; i--) { + u_char tx_status = inb(ioaddr + TxStatus); + if (!(tx_status & 0x84)) + break; + /* reset transmitter on jabber error or underrun */ + if (tx_status & 0x30) + tc574_wait_for_completion(dev, TxReset); + if (tx_status & 0x38) { + pr_debug("%s: transmit error: status 0x%02x\n", + dev->name, tx_status); + outw(TxEnable, ioaddr + EL3_CMD); + dev->stats.tx_aborted_errors++; + } + outb(0x00, ioaddr + TxStatus); /* Pop the status stack. */ + } +} + +static netdev_tx_t el3_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + struct el3_private *lp = netdev_priv(dev); + unsigned long flags; + + pr_debug("%s: el3_start_xmit(length = %ld) called, " + "status %4.4x.\n", dev->name, (long)skb->len, + inw(ioaddr + EL3_STATUS)); + + spin_lock_irqsave(&lp->window_lock, flags); + + dev->stats.tx_bytes += skb->len; + + /* Put out the doubleword header... */ + outw(skb->len, ioaddr + TX_FIFO); + outw(0, ioaddr + TX_FIFO); + /* ... and the packet rounded to a doubleword. */ + outsl(ioaddr + TX_FIFO, skb->data, (skb->len+3)>>2); + + /* TxFree appears only in Window 1, not offset 0x1c. */ + if (inw(ioaddr + TxFree) <= 1536) { + netif_stop_queue(dev); + /* Interrupt us when the FIFO has room for max-sized packet. + The threshold is in units of dwords. */ + outw(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD); + } + + pop_tx_status(dev); + spin_unlock_irqrestore(&lp->window_lock, flags); + dev_kfree_skb(skb); + return NETDEV_TX_OK; +} + +/* The EL3 interrupt handler. */ +static irqreturn_t el3_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *) dev_id; + struct el3_private *lp = netdev_priv(dev); + unsigned int ioaddr; + unsigned status; + int work_budget = max_interrupt_work; + int handled = 0; + + if (!netif_device_present(dev)) + return IRQ_NONE; + ioaddr = dev->base_addr; + + pr_debug("%s: interrupt, status %4.4x.\n", + dev->name, inw(ioaddr + EL3_STATUS)); + + spin_lock(&lp->window_lock); + + while ((status = inw(ioaddr + EL3_STATUS)) & + (IntLatch | RxComplete | RxEarly | StatsFull)) { + if (!netif_device_present(dev) || + ((status & 0xe000) != 0x2000)) { + pr_debug("%s: Interrupt from dead card\n", dev->name); + break; + } + + handled = 1; + + if (status & RxComplete) + work_budget = el3_rx(dev, work_budget); + + if (status & TxAvailable) { + pr_debug(" TX room bit was handled.\n"); + /* There's room in the FIFO for a full-sized packet. */ + outw(AckIntr | TxAvailable, ioaddr + EL3_CMD); + netif_wake_queue(dev); + } + + if (status & TxComplete) + pop_tx_status(dev); + + if (status & (AdapterFailure | RxEarly | StatsFull)) { + /* Handle all uncommon interrupts. */ + if (status & StatsFull) + update_stats(dev); + if (status & RxEarly) { + work_budget = el3_rx(dev, work_budget); + outw(AckIntr | RxEarly, ioaddr + EL3_CMD); + } + if (status & AdapterFailure) { + u16 fifo_diag; + EL3WINDOW(4); + fifo_diag = inw(ioaddr + Wn4_FIFODiag); + EL3WINDOW(1); + netdev_notice(dev, "adapter failure, FIFO diagnostic register %04x\n", + fifo_diag); + if (fifo_diag & 0x0400) { + /* Tx overrun */ + tc574_wait_for_completion(dev, TxReset); + outw(TxEnable, ioaddr + EL3_CMD); + } + if (fifo_diag & 0x2000) { + /* Rx underrun */ + tc574_wait_for_completion(dev, RxReset); + set_rx_mode(dev); + outw(RxEnable, ioaddr + EL3_CMD); + } + outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD); + } + } + + if (--work_budget < 0) { + pr_debug("%s: Too much work in interrupt, " + "status %4.4x.\n", dev->name, status); + /* Clear all interrupts */ + outw(AckIntr | 0xFF, ioaddr + EL3_CMD); + break; + } + /* Acknowledge the IRQ. */ + outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); + } + + pr_debug("%s: exiting interrupt, status %4.4x.\n", + dev->name, inw(ioaddr + EL3_STATUS)); + + spin_unlock(&lp->window_lock); + return IRQ_RETVAL(handled); +} + +/* + This timer serves two purposes: to check for missed interrupts + (and as a last resort, poll the NIC for events), and to monitor + the MII, reporting changes in cable status. +*/ +static void media_check(unsigned long arg) +{ + struct net_device *dev = (struct net_device *) arg; + struct el3_private *lp = netdev_priv(dev); + unsigned int ioaddr = dev->base_addr; + unsigned long flags; + unsigned short /* cable, */ media, partner; + + if (!netif_device_present(dev)) + goto reschedule; + + /* Check for pending interrupt with expired latency timer: with + this, we can limp along even if the interrupt is blocked */ + if ((inw(ioaddr + EL3_STATUS) & IntLatch) && (inb(ioaddr + Timer) == 0xff)) { + if (!lp->fast_poll) + netdev_info(dev, "interrupt(s) dropped!\n"); + + local_irq_save(flags); + el3_interrupt(dev->irq, dev); + local_irq_restore(flags); + + lp->fast_poll = HZ; + } + if (lp->fast_poll) { + lp->fast_poll--; + lp->media.expires = jiffies + 2*HZ/100; + add_timer(&lp->media); + return; + } + + spin_lock_irqsave(&lp->window_lock, flags); + EL3WINDOW(4); + media = mdio_read(ioaddr, lp->phys, 1); + partner = mdio_read(ioaddr, lp->phys, 5); + EL3WINDOW(1); + + if (media != lp->media_status) { + if ((media ^ lp->media_status) & 0x0004) + netdev_info(dev, "%s link beat\n", + (lp->media_status & 0x0004) ? "lost" : "found"); + if ((media ^ lp->media_status) & 0x0020) { + lp->partner = 0; + if (lp->media_status & 0x0020) { + netdev_info(dev, "autonegotiation restarted\n"); + } else if (partner) { + partner &= lp->advertising; + lp->partner = partner; + netdev_info(dev, "autonegotiation complete: " + "%dbaseT-%cD selected\n", + (partner & 0x0180) ? 100 : 10, + (partner & 0x0140) ? 'F' : 'H'); + } else { + netdev_info(dev, "link partner did not autonegotiate\n"); + } + + EL3WINDOW(3); + outb((partner & 0x0140 ? 0x20 : 0) | + (dev->mtu > 1500 ? 0x40 : 0), ioaddr + Wn3_MAC_Ctrl); + EL3WINDOW(1); + + } + if (media & 0x0010) + netdev_info(dev, "remote fault detected\n"); + if (media & 0x0002) + netdev_info(dev, "jabber detected\n"); + lp->media_status = media; + } + spin_unlock_irqrestore(&lp->window_lock, flags); + +reschedule: + lp->media.expires = jiffies + HZ; + add_timer(&lp->media); +} + +static struct net_device_stats *el3_get_stats(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + + if (netif_device_present(dev)) { + unsigned long flags; + spin_lock_irqsave(&lp->window_lock, flags); + update_stats(dev); + spin_unlock_irqrestore(&lp->window_lock, flags); + } + return &dev->stats; +} + +/* Update statistics. + Surprisingly this need not be run single-threaded, but it effectively is. + The counters clear when read, so the adds must merely be atomic. + */ +static void update_stats(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + u8 rx, tx, up; + + pr_debug("%s: updating the statistics.\n", dev->name); + + if (inw(ioaddr+EL3_STATUS) == 0xffff) /* No card. */ + return; + + /* Unlike the 3c509 we need not turn off stats updates while reading. */ + /* Switch to the stats window, and read everything. */ + EL3WINDOW(6); + dev->stats.tx_carrier_errors += inb(ioaddr + 0); + dev->stats.tx_heartbeat_errors += inb(ioaddr + 1); + /* Multiple collisions. */ inb(ioaddr + 2); + dev->stats.collisions += inb(ioaddr + 3); + dev->stats.tx_window_errors += inb(ioaddr + 4); + dev->stats.rx_fifo_errors += inb(ioaddr + 5); + dev->stats.tx_packets += inb(ioaddr + 6); + up = inb(ioaddr + 9); + dev->stats.tx_packets += (up&0x30) << 4; + /* Rx packets */ inb(ioaddr + 7); + /* Tx deferrals */ inb(ioaddr + 8); + rx = inw(ioaddr + 10); + tx = inw(ioaddr + 12); + + EL3WINDOW(4); + /* BadSSD */ inb(ioaddr + 12); + up = inb(ioaddr + 13); + + EL3WINDOW(1); +} + +static int el3_rx(struct net_device *dev, int worklimit) +{ + unsigned int ioaddr = dev->base_addr; + short rx_status; + + pr_debug("%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n", + dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RxStatus)); + while (!((rx_status = inw(ioaddr + RxStatus)) & 0x8000) && + worklimit > 0) { + worklimit--; + if (rx_status & 0x4000) { /* Error, update stats. */ + short error = rx_status & 0x3800; + dev->stats.rx_errors++; + switch (error) { + case 0x0000: dev->stats.rx_over_errors++; break; + case 0x0800: dev->stats.rx_length_errors++; break; + case 0x1000: dev->stats.rx_frame_errors++; break; + case 0x1800: dev->stats.rx_length_errors++; break; + case 0x2000: dev->stats.rx_frame_errors++; break; + case 0x2800: dev->stats.rx_crc_errors++; break; + } + } else { + short pkt_len = rx_status & 0x7ff; + struct sk_buff *skb; + + skb = dev_alloc_skb(pkt_len+5); + + pr_debug(" Receiving packet size %d status %4.4x.\n", + pkt_len, rx_status); + if (skb != NULL) { + skb_reserve(skb, 2); + insl(ioaddr+RX_FIFO, skb_put(skb, pkt_len), + ((pkt_len+3)>>2)); + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; + } else { + pr_debug("%s: couldn't allocate a sk_buff of" + " size %d.\n", dev->name, pkt_len); + dev->stats.rx_dropped++; + } + } + tc574_wait_for_completion(dev, RxDiscard); + } + + return worklimit; +} + +/* Provide ioctl() calls to examine the MII xcvr state. */ +static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct el3_private *lp = netdev_priv(dev); + unsigned int ioaddr = dev->base_addr; + struct mii_ioctl_data *data = if_mii(rq); + int phy = lp->phys & 0x1f; + + pr_debug("%s: In ioct(%-.6s, %#4.4x) %4.4x %4.4x %4.4x %4.4x.\n", + dev->name, rq->ifr_ifrn.ifrn_name, cmd, + data->phy_id, data->reg_num, data->val_in, data->val_out); + + switch(cmd) { + case SIOCGMIIPHY: /* Get the address of the PHY in use. */ + data->phy_id = phy; + case SIOCGMIIREG: /* Read the specified MII register. */ + { + int saved_window; + unsigned long flags; + + spin_lock_irqsave(&lp->window_lock, flags); + saved_window = inw(ioaddr + EL3_CMD) >> 13; + EL3WINDOW(4); + data->val_out = mdio_read(ioaddr, data->phy_id & 0x1f, + data->reg_num & 0x1f); + EL3WINDOW(saved_window); + spin_unlock_irqrestore(&lp->window_lock, flags); + return 0; + } + case SIOCSMIIREG: /* Write the specified MII register */ + { + int saved_window; + unsigned long flags; + + spin_lock_irqsave(&lp->window_lock, flags); + saved_window = inw(ioaddr + EL3_CMD) >> 13; + EL3WINDOW(4); + mdio_write(ioaddr, data->phy_id & 0x1f, + data->reg_num & 0x1f, data->val_in); + EL3WINDOW(saved_window); + spin_unlock_irqrestore(&lp->window_lock, flags); + return 0; + } + default: + return -EOPNOTSUPP; + } +} + +/* The Odie chip has a 64 bin multicast filter, but the bit layout is not + documented. Until it is we revert to receiving all multicast frames when + any multicast reception is desired. + Note: My other drivers emit a log message whenever promiscuous mode is + entered to help detect password sniffers. This is less desirable on + typical PC card machines, so we omit the message. + */ + +static void set_rx_mode(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + + if (dev->flags & IFF_PROMISC) + outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm, + ioaddr + EL3_CMD); + else if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI)) + outw(SetRxFilter|RxStation|RxMulticast|RxBroadcast, ioaddr + EL3_CMD); + else + outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD); +} + +static void set_multicast_list(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + unsigned long flags; + + spin_lock_irqsave(&lp->window_lock, flags); + set_rx_mode(dev); + spin_unlock_irqrestore(&lp->window_lock, flags); +} + +static int el3_close(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + struct el3_private *lp = netdev_priv(dev); + struct pcmcia_device *link = lp->p_dev; + + dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name); + + if (pcmcia_dev_present(link)) { + unsigned long flags; + + /* Turn off statistics ASAP. We update lp->stats below. */ + outw(StatsDisable, ioaddr + EL3_CMD); + + /* Disable the receiver and transmitter. */ + outw(RxDisable, ioaddr + EL3_CMD); + outw(TxDisable, ioaddr + EL3_CMD); + + /* Note: Switching to window 0 may disable the IRQ. */ + EL3WINDOW(0); + spin_lock_irqsave(&lp->window_lock, flags); + update_stats(dev); + spin_unlock_irqrestore(&lp->window_lock, flags); + + /* force interrupts off */ + outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD); + } + + link->open--; + netif_stop_queue(dev); + del_timer_sync(&lp->media); + + return 0; +} + +static const struct pcmcia_device_id tc574_ids[] = { + PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0574), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x0556, "cis/3CCFEM556.cis"), + PCMCIA_DEVICE_NULL, +}; +MODULE_DEVICE_TABLE(pcmcia, tc574_ids); + +static struct pcmcia_driver tc574_driver = { + .owner = THIS_MODULE, + .name = "3c574_cs", + .probe = tc574_probe, + .remove = tc574_detach, + .id_table = tc574_ids, + .suspend = tc574_suspend, + .resume = tc574_resume, +}; + +static int __init init_tc574(void) +{ + return pcmcia_register_driver(&tc574_driver); +} + +static void __exit exit_tc574(void) +{ + pcmcia_unregister_driver(&tc574_driver); +} + +module_init(init_tc574); +module_exit(exit_tc574); diff --git a/drivers/net/ethernet/3com/3c589_cs.c b/drivers/net/ethernet/3com/3c589_cs.c new file mode 100644 index 000000000000..4a1a35809807 --- /dev/null +++ b/drivers/net/ethernet/3com/3c589_cs.c @@ -0,0 +1,943 @@ +/*====================================================================== + + A PCMCIA ethernet driver for the 3com 3c589 card. + + Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net + + 3c589_cs.c 1.162 2001/10/13 00:08:50 + + The network driver code is based on Donald Becker's 3c589 code: + + Written 1994 by Donald Becker. + Copyright 1993 United States Government as represented by the + Director, National Security Agency. This software may be used and + distributed according to the terms of the GNU General Public License, + incorporated herein by reference. + Donald Becker may be reached at becker@scyld.com + + Updated for 2.5.x by Alan Cox <alan@lxorguk.ukuu.org.uk> + +======================================================================*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#define DRV_NAME "3c589_cs" +#define DRV_VERSION "1.162-ac" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/delay.h> +#include <linux/ethtool.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> +#include <linux/bitops.h> +#include <linux/jiffies.h> + +#include <pcmcia/cistpl.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/ciscode.h> +#include <pcmcia/ds.h> + +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/system.h> + +/* To minimize the size of the driver source I only define operating + constants if they are used several times. You'll need the manual + if you want to understand driver details. */ +/* Offsets from base I/O address. */ +#define EL3_DATA 0x00 +#define EL3_TIMER 0x0a +#define EL3_CMD 0x0e +#define EL3_STATUS 0x0e + +#define EEPROM_READ 0x0080 +#define EEPROM_BUSY 0x8000 + +#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD) + +/* The top five bits written to EL3_CMD are a command, the lower + 11 bits are the parameter, if applicable. */ +enum c509cmd { + TotalReset = 0<<11, + SelectWindow = 1<<11, + StartCoax = 2<<11, + RxDisable = 3<<11, + RxEnable = 4<<11, + RxReset = 5<<11, + RxDiscard = 8<<11, + TxEnable = 9<<11, + TxDisable = 10<<11, + TxReset = 11<<11, + FakeIntr = 12<<11, + AckIntr = 13<<11, + SetIntrEnb = 14<<11, + SetStatusEnb = 15<<11, + SetRxFilter = 16<<11, + SetRxThreshold = 17<<11, + SetTxThreshold = 18<<11, + SetTxStart = 19<<11, + StatsEnable = 21<<11, + StatsDisable = 22<<11, + StopCoax = 23<<11 +}; + +enum c509status { + IntLatch = 0x0001, + AdapterFailure = 0x0002, + TxComplete = 0x0004, + TxAvailable = 0x0008, + RxComplete = 0x0010, + RxEarly = 0x0020, + IntReq = 0x0040, + StatsFull = 0x0080, + CmdBusy = 0x1000 +}; + +/* The SetRxFilter command accepts the following classes: */ +enum RxFilter { + RxStation = 1, + RxMulticast = 2, + RxBroadcast = 4, + RxProm = 8 +}; + +/* Register window 1 offsets, the window used in normal operation. */ +#define TX_FIFO 0x00 +#define RX_FIFO 0x00 +#define RX_STATUS 0x08 +#define TX_STATUS 0x0B +#define TX_FREE 0x0C /* Remaining free bytes in Tx buffer. */ + +#define WN0_IRQ 0x08 /* Window 0: Set IRQ line in bits 12-15. */ +#define WN4_MEDIA 0x0A /* Window 4: Various transcvr/media bits. */ +#define MEDIA_TP 0x00C0 /* Enable link beat and jabber for 10baseT. */ +#define MEDIA_LED 0x0001 /* Enable link light on 3C589E cards. */ + +/* Time in jiffies before concluding Tx hung */ +#define TX_TIMEOUT ((400*HZ)/1000) + +struct el3_private { + struct pcmcia_device *p_dev; + /* For transceiver monitoring */ + struct timer_list media; + u16 media_status; + u16 fast_poll; + unsigned long last_irq; + spinlock_t lock; +}; + +static const char *if_names[] = { "auto", "10baseT", "10base2", "AUI" }; + +/*====================================================================*/ + +/* Module parameters */ + +MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>"); +MODULE_DESCRIPTION("3Com 3c589 series PCMCIA ethernet driver"); +MODULE_LICENSE("GPL"); + +#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) + +/* Special hook for setting if_port when module is loaded */ +INT_MODULE_PARM(if_port, 0); + + +/*====================================================================*/ + +static int tc589_config(struct pcmcia_device *link); +static void tc589_release(struct pcmcia_device *link); + +static u16 read_eeprom(unsigned int ioaddr, int index); +static void tc589_reset(struct net_device *dev); +static void media_check(unsigned long arg); +static int el3_config(struct net_device *dev, struct ifmap *map); +static int el3_open(struct net_device *dev); +static netdev_tx_t el3_start_xmit(struct sk_buff *skb, + struct net_device *dev); +static irqreturn_t el3_interrupt(int irq, void *dev_id); +static void update_stats(struct net_device *dev); +static struct net_device_stats *el3_get_stats(struct net_device *dev); +static int el3_rx(struct net_device *dev); +static int el3_close(struct net_device *dev); +static void el3_tx_timeout(struct net_device *dev); +static void set_rx_mode(struct net_device *dev); +static void set_multicast_list(struct net_device *dev); +static const struct ethtool_ops netdev_ethtool_ops; + +static void tc589_detach(struct pcmcia_device *p_dev); + +static const struct net_device_ops el3_netdev_ops = { + .ndo_open = el3_open, + .ndo_stop = el3_close, + .ndo_start_xmit = el3_start_xmit, + .ndo_tx_timeout = el3_tx_timeout, + .ndo_set_config = el3_config, + .ndo_get_stats = el3_get_stats, + .ndo_set_multicast_list = set_multicast_list, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + +static int tc589_probe(struct pcmcia_device *link) +{ + struct el3_private *lp; + struct net_device *dev; + + dev_dbg(&link->dev, "3c589_attach()\n"); + + /* Create new ethernet device */ + dev = alloc_etherdev(sizeof(struct el3_private)); + if (!dev) + return -ENOMEM; + lp = netdev_priv(dev); + link->priv = dev; + lp->p_dev = link; + + spin_lock_init(&lp->lock); + link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 1; + + dev->netdev_ops = &el3_netdev_ops; + dev->watchdog_timeo = TX_TIMEOUT; + + SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); + + return tc589_config(link); +} + +static void tc589_detach(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + + dev_dbg(&link->dev, "3c589_detach\n"); + + unregister_netdev(dev); + + tc589_release(link); + + free_netdev(dev); +} /* tc589_detach */ + +static int tc589_config(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + __be16 *phys_addr; + int ret, i, j, multi = 0, fifo; + unsigned int ioaddr; + static const char * const ram_split[] = {"5:3", "3:1", "1:1", "3:5"}; + u8 *buf; + size_t len; + + dev_dbg(&link->dev, "3c589_config\n"); + + phys_addr = (__be16 *)dev->dev_addr; + /* Is this a 3c562? */ + if (link->manf_id != MANFID_3COM) + dev_info(&link->dev, "hmmm, is this really a 3Com card??\n"); + multi = (link->card_id == PRODID_3COM_3C562); + + link->io_lines = 16; + + /* For the 3c562, the base address must be xx00-xx7f */ + for (i = j = 0; j < 0x400; j += 0x10) { + if (multi && (j & 0x80)) continue; + link->resource[0]->start = j ^ 0x300; + i = pcmcia_request_io(link); + if (i == 0) + break; + } + if (i != 0) + goto failed; + + ret = pcmcia_request_irq(link, el3_interrupt); + if (ret) + goto failed; + + ret = pcmcia_enable_device(link); + if (ret) + goto failed; + + dev->irq = link->irq; + dev->base_addr = link->resource[0]->start; + ioaddr = dev->base_addr; + EL3WINDOW(0); + + /* The 3c589 has an extra EEPROM for configuration info, including + the hardware address. The 3c562 puts the address in the CIS. */ + len = pcmcia_get_tuple(link, 0x88, &buf); + if (buf && len >= 6) { + for (i = 0; i < 3; i++) + phys_addr[i] = htons(le16_to_cpu(buf[i*2])); + kfree(buf); + } else { + kfree(buf); /* 0 < len < 6 */ + for (i = 0; i < 3; i++) + phys_addr[i] = htons(read_eeprom(ioaddr, i)); + if (phys_addr[0] == htons(0x6060)) { + dev_err(&link->dev, "IO port conflict at 0x%03lx-0x%03lx\n", + dev->base_addr, dev->base_addr+15); + goto failed; + } + } + + /* The address and resource configuration register aren't loaded from + the EEPROM and *must* be set to 0 and IRQ3 for the PCMCIA version. */ + outw(0x3f00, ioaddr + 8); + fifo = inl(ioaddr); + + /* The if_port symbol can be set when the module is loaded */ + if ((if_port >= 0) && (if_port <= 3)) + dev->if_port = if_port; + else + dev_err(&link->dev, "invalid if_port requested\n"); + + SET_NETDEV_DEV(dev, &link->dev); + + if (register_netdev(dev) != 0) { + dev_err(&link->dev, "register_netdev() failed\n"); + goto failed; + } + + netdev_info(dev, "3Com 3c%s, io %#3lx, irq %d, hw_addr %pM\n", + (multi ? "562" : "589"), dev->base_addr, dev->irq, + dev->dev_addr); + netdev_info(dev, " %dK FIFO split %s Rx:Tx, %s xcvr\n", + (fifo & 7) ? 32 : 8, ram_split[(fifo >> 16) & 3], + if_names[dev->if_port]); + return 0; + +failed: + tc589_release(link); + return -ENODEV; +} /* tc589_config */ + +static void tc589_release(struct pcmcia_device *link) +{ + pcmcia_disable_device(link); +} + +static int tc589_suspend(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + + if (link->open) + netif_device_detach(dev); + + return 0; +} + +static int tc589_resume(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + + if (link->open) { + tc589_reset(dev); + netif_device_attach(dev); + } + + return 0; +} + +/*====================================================================*/ + +/* + Use this for commands that may take time to finish +*/ +static void tc589_wait_for_completion(struct net_device *dev, int cmd) +{ + int i = 100; + outw(cmd, dev->base_addr + EL3_CMD); + while (--i > 0) + if (!(inw(dev->base_addr + EL3_STATUS) & 0x1000)) break; + if (i == 0) + netdev_warn(dev, "command 0x%04x did not complete!\n", cmd); +} + +/* + Read a word from the EEPROM using the regular EEPROM access register. + Assume that we are in register window zero. +*/ +static u16 read_eeprom(unsigned int ioaddr, int index) +{ + int i; + outw(EEPROM_READ + index, ioaddr + 10); + /* Reading the eeprom takes 162 us */ + for (i = 1620; i >= 0; i--) + if ((inw(ioaddr + 10) & EEPROM_BUSY) == 0) + break; + return inw(ioaddr + 12); +} + +/* + Set transceiver type, perhaps to something other than what the user + specified in dev->if_port. +*/ +static void tc589_set_xcvr(struct net_device *dev, int if_port) +{ + struct el3_private *lp = netdev_priv(dev); + unsigned int ioaddr = dev->base_addr; + + EL3WINDOW(0); + switch (if_port) { + case 0: case 1: outw(0, ioaddr + 6); break; + case 2: outw(3<<14, ioaddr + 6); break; + case 3: outw(1<<14, ioaddr + 6); break; + } + /* On PCMCIA, this just turns on the LED */ + outw((if_port == 2) ? StartCoax : StopCoax, ioaddr + EL3_CMD); + /* 10baseT interface, enable link beat and jabber check. */ + EL3WINDOW(4); + outw(MEDIA_LED | ((if_port < 2) ? MEDIA_TP : 0), ioaddr + WN4_MEDIA); + EL3WINDOW(1); + if (if_port == 2) + lp->media_status = ((dev->if_port == 0) ? 0x8000 : 0x4000); + else + lp->media_status = ((dev->if_port == 0) ? 0x4010 : 0x8800); +} + +static void dump_status(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + EL3WINDOW(1); + netdev_info(dev, " irq status %04x, rx status %04x, tx status %02x tx free %04x\n", + inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS), + inb(ioaddr+TX_STATUS), inw(ioaddr+TX_FREE)); + EL3WINDOW(4); + netdev_info(dev, " diagnostics: fifo %04x net %04x ethernet %04x media %04x\n", + inw(ioaddr+0x04), inw(ioaddr+0x06), inw(ioaddr+0x08), + inw(ioaddr+0x0a)); + EL3WINDOW(1); +} + +/* Reset and restore all of the 3c589 registers. */ +static void tc589_reset(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + int i; + + EL3WINDOW(0); + outw(0x0001, ioaddr + 4); /* Activate board. */ + outw(0x3f00, ioaddr + 8); /* Set the IRQ line. */ + + /* Set the station address in window 2. */ + EL3WINDOW(2); + for (i = 0; i < 6; i++) + outb(dev->dev_addr[i], ioaddr + i); + + tc589_set_xcvr(dev, dev->if_port); + + /* Switch to the stats window, and clear all stats by reading. */ + outw(StatsDisable, ioaddr + EL3_CMD); + EL3WINDOW(6); + for (i = 0; i < 9; i++) + inb(ioaddr+i); + inw(ioaddr + 10); + inw(ioaddr + 12); + + /* Switch to register set 1 for normal use. */ + EL3WINDOW(1); + + set_rx_mode(dev); + outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */ + outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */ + outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */ + /* Allow status bits to be seen. */ + outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD); + /* Ack all pending events, and set active indicator mask. */ + outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq, + ioaddr + EL3_CMD); + outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull + | AdapterFailure, ioaddr + EL3_CMD); +} + +static void netdev_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr); +} + +static const struct ethtool_ops netdev_ethtool_ops = { + .get_drvinfo = netdev_get_drvinfo, +}; + +static int el3_config(struct net_device *dev, struct ifmap *map) +{ + if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) { + if (map->port <= 3) { + dev->if_port = map->port; + netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]); + tc589_set_xcvr(dev, dev->if_port); + } else + return -EINVAL; + } + return 0; +} + +static int el3_open(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + struct pcmcia_device *link = lp->p_dev; + + if (!pcmcia_dev_present(link)) + return -ENODEV; + + link->open++; + netif_start_queue(dev); + + tc589_reset(dev); + init_timer(&lp->media); + lp->media.function = media_check; + lp->media.data = (unsigned long) dev; + lp->media.expires = jiffies + HZ; + add_timer(&lp->media); + + dev_dbg(&link->dev, "%s: opened, status %4.4x.\n", + dev->name, inw(dev->base_addr + EL3_STATUS)); + + return 0; +} + +static void el3_tx_timeout(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + + netdev_warn(dev, "Transmit timed out!\n"); + dump_status(dev); + dev->stats.tx_errors++; + dev->trans_start = jiffies; /* prevent tx timeout */ + /* Issue TX_RESET and TX_START commands. */ + tc589_wait_for_completion(dev, TxReset); + outw(TxEnable, ioaddr + EL3_CMD); + netif_wake_queue(dev); +} + +static void pop_tx_status(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + int i; + + /* Clear the Tx status stack. */ + for (i = 32; i > 0; i--) { + u_char tx_status = inb(ioaddr + TX_STATUS); + if (!(tx_status & 0x84)) break; + /* reset transmitter on jabber error or underrun */ + if (tx_status & 0x30) + tc589_wait_for_completion(dev, TxReset); + if (tx_status & 0x38) { + netdev_dbg(dev, "transmit error: status 0x%02x\n", tx_status); + outw(TxEnable, ioaddr + EL3_CMD); + dev->stats.tx_aborted_errors++; + } + outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */ + } +} + +static netdev_tx_t el3_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + struct el3_private *priv = netdev_priv(dev); + unsigned long flags; + + netdev_dbg(dev, "el3_start_xmit(length = %ld) called, status %4.4x.\n", + (long)skb->len, inw(ioaddr + EL3_STATUS)); + + spin_lock_irqsave(&priv->lock, flags); + + dev->stats.tx_bytes += skb->len; + + /* Put out the doubleword header... */ + outw(skb->len, ioaddr + TX_FIFO); + outw(0x00, ioaddr + TX_FIFO); + /* ... and the packet rounded to a doubleword. */ + outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2); + + if (inw(ioaddr + TX_FREE) <= 1536) { + netif_stop_queue(dev); + /* Interrupt us when the FIFO has room for max-sized packet. */ + outw(SetTxThreshold + 1536, ioaddr + EL3_CMD); + } + + pop_tx_status(dev); + spin_unlock_irqrestore(&priv->lock, flags); + dev_kfree_skb(skb); + + return NETDEV_TX_OK; +} + +/* The EL3 interrupt handler. */ +static irqreturn_t el3_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *) dev_id; + struct el3_private *lp = netdev_priv(dev); + unsigned int ioaddr; + __u16 status; + int i = 0, handled = 1; + + if (!netif_device_present(dev)) + return IRQ_NONE; + + ioaddr = dev->base_addr; + + netdev_dbg(dev, "interrupt, status %4.4x.\n", inw(ioaddr + EL3_STATUS)); + + spin_lock(&lp->lock); + while ((status = inw(ioaddr + EL3_STATUS)) & + (IntLatch | RxComplete | StatsFull)) { + if ((status & 0xe000) != 0x2000) { + netdev_dbg(dev, "interrupt from dead card\n"); + handled = 0; + break; + } + if (status & RxComplete) + el3_rx(dev); + if (status & TxAvailable) { + netdev_dbg(dev, " TX room bit was handled.\n"); + /* There's room in the FIFO for a full-sized packet. */ + outw(AckIntr | TxAvailable, ioaddr + EL3_CMD); + netif_wake_queue(dev); + } + if (status & TxComplete) + pop_tx_status(dev); + if (status & (AdapterFailure | RxEarly | StatsFull)) { + /* Handle all uncommon interrupts. */ + if (status & StatsFull) /* Empty statistics. */ + update_stats(dev); + if (status & RxEarly) { /* Rx early is unused. */ + el3_rx(dev); + outw(AckIntr | RxEarly, ioaddr + EL3_CMD); + } + if (status & AdapterFailure) { + u16 fifo_diag; + EL3WINDOW(4); + fifo_diag = inw(ioaddr + 4); + EL3WINDOW(1); + netdev_warn(dev, "adapter failure, FIFO diagnostic register %04x.\n", + fifo_diag); + if (fifo_diag & 0x0400) { + /* Tx overrun */ + tc589_wait_for_completion(dev, TxReset); + outw(TxEnable, ioaddr + EL3_CMD); + } + if (fifo_diag & 0x2000) { + /* Rx underrun */ + tc589_wait_for_completion(dev, RxReset); + set_rx_mode(dev); + outw(RxEnable, ioaddr + EL3_CMD); + } + outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD); + } + } + if (++i > 10) { + netdev_err(dev, "infinite loop in interrupt, status %4.4x.\n", + status); + /* Clear all interrupts */ + outw(AckIntr | 0xFF, ioaddr + EL3_CMD); + break; + } + /* Acknowledge the IRQ. */ + outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); + } + lp->last_irq = jiffies; + spin_unlock(&lp->lock); + netdev_dbg(dev, "exiting interrupt, status %4.4x.\n", + inw(ioaddr + EL3_STATUS)); + return IRQ_RETVAL(handled); +} + +static void media_check(unsigned long arg) +{ + struct net_device *dev = (struct net_device *)(arg); + struct el3_private *lp = netdev_priv(dev); + unsigned int ioaddr = dev->base_addr; + u16 media, errs; + unsigned long flags; + + if (!netif_device_present(dev)) goto reschedule; + + /* Check for pending interrupt with expired latency timer: with + this, we can limp along even if the interrupt is blocked */ + if ((inw(ioaddr + EL3_STATUS) & IntLatch) && + (inb(ioaddr + EL3_TIMER) == 0xff)) { + if (!lp->fast_poll) + netdev_warn(dev, "interrupt(s) dropped!\n"); + + local_irq_save(flags); + el3_interrupt(dev->irq, dev); + local_irq_restore(flags); + + lp->fast_poll = HZ; + } + if (lp->fast_poll) { + lp->fast_poll--; + lp->media.expires = jiffies + HZ/100; + add_timer(&lp->media); + return; + } + + /* lp->lock guards the EL3 window. Window should always be 1 except + when the lock is held */ + spin_lock_irqsave(&lp->lock, flags); + EL3WINDOW(4); + media = inw(ioaddr+WN4_MEDIA) & 0xc810; + + /* Ignore collisions unless we've had no irq's recently */ + if (time_before(jiffies, lp->last_irq + HZ)) { + media &= ~0x0010; + } else { + /* Try harder to detect carrier errors */ + EL3WINDOW(6); + outw(StatsDisable, ioaddr + EL3_CMD); + errs = inb(ioaddr + 0); + outw(StatsEnable, ioaddr + EL3_CMD); + dev->stats.tx_carrier_errors += errs; + if (errs || (lp->media_status & 0x0010)) media |= 0x0010; + } + + if (media != lp->media_status) { + if ((media & lp->media_status & 0x8000) && + ((lp->media_status ^ media) & 0x0800)) + netdev_info(dev, "%s link beat\n", + (lp->media_status & 0x0800 ? "lost" : "found")); + else if ((media & lp->media_status & 0x4000) && + ((lp->media_status ^ media) & 0x0010)) + netdev_info(dev, "coax cable %s\n", + (lp->media_status & 0x0010 ? "ok" : "problem")); + if (dev->if_port == 0) { + if (media & 0x8000) { + if (media & 0x0800) + netdev_info(dev, "flipped to 10baseT\n"); + else + tc589_set_xcvr(dev, 2); + } else if (media & 0x4000) { + if (media & 0x0010) + tc589_set_xcvr(dev, 1); + else + netdev_info(dev, "flipped to 10base2\n"); + } + } + lp->media_status = media; + } + + EL3WINDOW(1); + spin_unlock_irqrestore(&lp->lock, flags); + +reschedule: + lp->media.expires = jiffies + HZ; + add_timer(&lp->media); +} + +static struct net_device_stats *el3_get_stats(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + unsigned long flags; + struct pcmcia_device *link = lp->p_dev; + + if (pcmcia_dev_present(link)) { + spin_lock_irqsave(&lp->lock, flags); + update_stats(dev); + spin_unlock_irqrestore(&lp->lock, flags); + } + return &dev->stats; +} + +/* + Update statistics. We change to register window 6, so this should be run + single-threaded if the device is active. This is expected to be a rare + operation, and it's simpler for the rest of the driver to assume that + window 1 is always valid rather than use a special window-state variable. + + Caller must hold the lock for this +*/ +static void update_stats(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + + netdev_dbg(dev, "updating the statistics.\n"); + /* Turn off statistics updates while reading. */ + outw(StatsDisable, ioaddr + EL3_CMD); + /* Switch to the stats window, and read everything. */ + EL3WINDOW(6); + dev->stats.tx_carrier_errors += inb(ioaddr + 0); + dev->stats.tx_heartbeat_errors += inb(ioaddr + 1); + /* Multiple collisions. */ inb(ioaddr + 2); + dev->stats.collisions += inb(ioaddr + 3); + dev->stats.tx_window_errors += inb(ioaddr + 4); + dev->stats.rx_fifo_errors += inb(ioaddr + 5); + dev->stats.tx_packets += inb(ioaddr + 6); + /* Rx packets */ inb(ioaddr + 7); + /* Tx deferrals */ inb(ioaddr + 8); + /* Rx octets */ inw(ioaddr + 10); + /* Tx octets */ inw(ioaddr + 12); + + /* Back to window 1, and turn statistics back on. */ + EL3WINDOW(1); + outw(StatsEnable, ioaddr + EL3_CMD); +} + +static int el3_rx(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + int worklimit = 32; + short rx_status; + + netdev_dbg(dev, "in rx_packet(), status %4.4x, rx_status %4.4x.\n", + inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS)); + while (!((rx_status = inw(ioaddr + RX_STATUS)) & 0x8000) && + worklimit > 0) { + worklimit--; + if (rx_status & 0x4000) { /* Error, update stats. */ + short error = rx_status & 0x3800; + dev->stats.rx_errors++; + switch (error) { + case 0x0000: dev->stats.rx_over_errors++; break; + case 0x0800: dev->stats.rx_length_errors++; break; + case 0x1000: dev->stats.rx_frame_errors++; break; + case 0x1800: dev->stats.rx_length_errors++; break; + case 0x2000: dev->stats.rx_frame_errors++; break; + case 0x2800: dev->stats.rx_crc_errors++; break; + } + } else { + short pkt_len = rx_status & 0x7ff; + struct sk_buff *skb; + + skb = dev_alloc_skb(pkt_len+5); + + netdev_dbg(dev, " Receiving packet size %d status %4.4x.\n", + pkt_len, rx_status); + if (skb != NULL) { + skb_reserve(skb, 2); + insl(ioaddr+RX_FIFO, skb_put(skb, pkt_len), + (pkt_len+3)>>2); + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; + } else { + netdev_dbg(dev, "couldn't allocate a sk_buff of size %d.\n", + pkt_len); + dev->stats.rx_dropped++; + } + } + /* Pop the top of the Rx FIFO */ + tc589_wait_for_completion(dev, RxDiscard); + } + if (worklimit == 0) + netdev_warn(dev, "too much work in el3_rx!\n"); + return 0; +} + +static void set_rx_mode(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + u16 opts = SetRxFilter | RxStation | RxBroadcast; + + if (dev->flags & IFF_PROMISC) + opts |= RxMulticast | RxProm; + else if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI)) + opts |= RxMulticast; + outw(opts, ioaddr + EL3_CMD); +} + +static void set_multicast_list(struct net_device *dev) +{ + struct el3_private *priv = netdev_priv(dev); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + set_rx_mode(dev); + spin_unlock_irqrestore(&priv->lock, flags); +} + +static int el3_close(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + struct pcmcia_device *link = lp->p_dev; + unsigned int ioaddr = dev->base_addr; + + dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name); + + if (pcmcia_dev_present(link)) { + /* Turn off statistics ASAP. We update dev->stats below. */ + outw(StatsDisable, ioaddr + EL3_CMD); + + /* Disable the receiver and transmitter. */ + outw(RxDisable, ioaddr + EL3_CMD); + outw(TxDisable, ioaddr + EL3_CMD); + + if (dev->if_port == 2) + /* Turn off thinnet power. Green! */ + outw(StopCoax, ioaddr + EL3_CMD); + else if (dev->if_port == 1) { + /* Disable link beat and jabber */ + EL3WINDOW(4); + outw(0, ioaddr + WN4_MEDIA); + } + + /* Switching back to window 0 disables the IRQ. */ + EL3WINDOW(0); + /* But we explicitly zero the IRQ line select anyway. */ + outw(0x0f00, ioaddr + WN0_IRQ); + + /* Check if the card still exists */ + if ((inw(ioaddr+EL3_STATUS) & 0xe000) == 0x2000) + update_stats(dev); + } + + link->open--; + netif_stop_queue(dev); + del_timer_sync(&lp->media); + + return 0; +} + +static const struct pcmcia_device_id tc589_ids[] = { + PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0101, 0x0562), + PCMCIA_MFC_DEVICE_PROD_ID1(0, "Motorola MARQUIS", 0xf03e4e77), + PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0589), + PCMCIA_DEVICE_PROD_ID12("Farallon", "ENet", 0x58d93fc4, 0x992c2202), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x0035, "cis/3CXEM556.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x003d, "cis/3CXEM556.cis"), + PCMCIA_DEVICE_NULL, +}; +MODULE_DEVICE_TABLE(pcmcia, tc589_ids); + +static struct pcmcia_driver tc589_driver = { + .owner = THIS_MODULE, + .name = "3c589_cs", + .probe = tc589_probe, + .remove = tc589_detach, + .id_table = tc589_ids, + .suspend = tc589_suspend, + .resume = tc589_resume, +}; + +static int __init init_tc589(void) +{ + return pcmcia_register_driver(&tc589_driver); +} + +static void __exit exit_tc589(void) +{ + pcmcia_unregister_driver(&tc589_driver); +} + +module_init(init_tc589); +module_exit(exit_tc589); diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c new file mode 100644 index 000000000000..8cc22568ebd3 --- /dev/null +++ b/drivers/net/ethernet/3com/3c59x.c @@ -0,0 +1,3326 @@ +/* EtherLinkXL.c: A 3Com EtherLink PCI III/XL ethernet driver for linux. */ +/* + Written 1996-1999 by Donald Becker. + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + This driver is for the 3Com "Vortex" and "Boomerang" series ethercards. + Members of the series include Fast EtherLink 3c590/3c592/3c595/3c597 + and the EtherLink XL 3c900 and 3c905 cards. + + Problem reports and questions should be directed to + vortex@scyld.com + + The author may be reached as becker@scyld.com, or C/O + Scyld Computing Corporation + 410 Severn Ave., Suite 210 + Annapolis MD 21403 + +*/ + +/* + * FIXME: This driver _could_ support MTU changing, but doesn't. See Don's hamachi.c implementation + * as well as other drivers + * + * NOTE: If you make 'vortex_debug' a constant (#define vortex_debug 0) the driver shrinks by 2k + * due to dead code elimination. There will be some performance benefits from this due to + * elimination of all the tests and reduced cache footprint. + */ + + +#define DRV_NAME "3c59x" + + + +/* A few values that may be tweaked. */ +/* Keep the ring sizes a power of two for efficiency. */ +#define TX_RING_SIZE 16 +#define RX_RING_SIZE 32 +#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ + +/* "Knobs" that adjust features and parameters. */ +/* Set the copy breakpoint for the copy-only-tiny-frames scheme. + Setting to > 1512 effectively disables this feature. */ +#ifndef __arm__ +static int rx_copybreak = 200; +#else +/* ARM systems perform better by disregarding the bus-master + transfer capability of these cards. -- rmk */ +static int rx_copybreak = 1513; +#endif +/* Allow setting MTU to a larger size, bypassing the normal ethernet setup. */ +static const int mtu = 1500; +/* Maximum events (Rx packets, etc.) to handle at each interrupt. */ +static int max_interrupt_work = 32; +/* Tx timeout interval (millisecs) */ +static int watchdog = 5000; + +/* Allow aggregation of Tx interrupts. Saves CPU load at the cost + * of possible Tx stalls if the system is blocking interrupts + * somewhere else. Undefine this to disable. + */ +#define tx_interrupt_mitigation 1 + +/* Put out somewhat more debugging messages. (0: no msg, 1 minimal .. 6). */ +#define vortex_debug debug +#ifdef VORTEX_DEBUG +static int vortex_debug = VORTEX_DEBUG; +#else +static int vortex_debug = 1; +#endif + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/errno.h> +#include <linux/in.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/mii.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/ethtool.h> +#include <linux/highmem.h> +#include <linux/eisa.h> +#include <linux/bitops.h> +#include <linux/jiffies.h> +#include <linux/gfp.h> +#include <asm/irq.h> /* For nr_irqs only. */ +#include <asm/io.h> +#include <asm/uaccess.h> + +/* Kernel compatibility defines, some common to David Hinds' PCMCIA package. + This is only in the support-all-kernels source code. */ + +#define RUN_AT(x) (jiffies + (x)) + +#include <linux/delay.h> + + +static const char version[] __devinitconst = + DRV_NAME ": Donald Becker and others.\n"; + +MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); +MODULE_DESCRIPTION("3Com 3c59x/3c9xx ethernet driver "); +MODULE_LICENSE("GPL"); + + +/* Operational parameter that usually are not changed. */ + +/* The Vortex size is twice that of the original EtherLinkIII series: the + runtime register window, window 1, is now always mapped in. + The Boomerang size is twice as large as the Vortex -- it has additional + bus master control registers. */ +#define VORTEX_TOTAL_SIZE 0x20 +#define BOOMERANG_TOTAL_SIZE 0x40 + +/* Set iff a MII transceiver on any interface requires mdio preamble. + This only set with the original DP83840 on older 3c905 boards, so the extra + code size of a per-interface flag is not worthwhile. */ +static char mii_preamble_required; + +#define PFX DRV_NAME ": " + + + +/* + Theory of Operation + +I. Board Compatibility + +This device driver is designed for the 3Com FastEtherLink and FastEtherLink +XL, 3Com's PCI to 10/100baseT adapters. It also works with the 10Mbs +versions of the FastEtherLink cards. The supported product IDs are + 3c590, 3c592, 3c595, 3c597, 3c900, 3c905 + +The related ISA 3c515 is supported with a separate driver, 3c515.c, included +with the kernel source or available from + cesdis.gsfc.nasa.gov:/pub/linux/drivers/3c515.html + +II. Board-specific settings + +PCI bus devices are configured by the system at boot time, so no jumpers +need to be set on the board. The system BIOS should be set to assign the +PCI INTA signal to an otherwise unused system IRQ line. + +The EEPROM settings for media type and forced-full-duplex are observed. +The EEPROM media type should be left at the default "autoselect" unless using +10base2 or AUI connections which cannot be reliably detected. + +III. Driver operation + +The 3c59x series use an interface that's very similar to the previous 3c5x9 +series. The primary interface is two programmed-I/O FIFOs, with an +alternate single-contiguous-region bus-master transfer (see next). + +The 3c900 "Boomerang" series uses a full-bus-master interface with separate +lists of transmit and receive descriptors, similar to the AMD LANCE/PCnet, +DEC Tulip and Intel Speedo3. The first chip version retains a compatible +programmed-I/O interface that has been removed in 'B' and subsequent board +revisions. + +One extension that is advertised in a very large font is that the adapters +are capable of being bus masters. On the Vortex chip this capability was +only for a single contiguous region making it far less useful than the full +bus master capability. There is a significant performance impact of taking +an extra interrupt or polling for the completion of each transfer, as well +as difficulty sharing the single transfer engine between the transmit and +receive threads. Using DMA transfers is a win only with large blocks or +with the flawed versions of the Intel Orion motherboard PCI controller. + +The Boomerang chip's full-bus-master interface is useful, and has the +currently-unused advantages over other similar chips that queued transmit +packets may be reordered and receive buffer groups are associated with a +single frame. + +With full-bus-master support, this driver uses a "RX_COPYBREAK" scheme. +Rather than a fixed intermediate receive buffer, this scheme allocates +full-sized skbuffs as receive buffers. The value RX_COPYBREAK is used as +the copying breakpoint: it is chosen to trade-off the memory wasted by +passing the full-sized skbuff to the queue layer for all frames vs. the +copying cost of copying a frame to a correctly-sized skbuff. + +IIIC. Synchronization +The driver runs as two independent, single-threaded flows of control. One +is the send-packet routine, which enforces single-threaded use by the +dev->tbusy flag. The other thread is the interrupt handler, which is single +threaded by the hardware and other software. + +IV. Notes + +Thanks to Cameron Spitzer and Terry Murphy of 3Com for providing development +3c590, 3c595, and 3c900 boards. +The name "Vortex" is the internal 3Com project name for the PCI ASIC, and +the EISA version is called "Demon". According to Terry these names come +from rides at the local amusement park. + +The new chips support both ethernet (1.5K) and FDDI (4.5K) packet sizes! +This driver only supports ethernet packets because of the skbuff allocation +limit of 4K. +*/ + +/* This table drives the PCI probe routines. It's mostly boilerplate in all + of the drivers, and will likely be provided by some future kernel. +*/ +enum pci_flags_bit { + PCI_USES_MASTER=4, +}; + +enum { IS_VORTEX=1, IS_BOOMERANG=2, IS_CYCLONE=4, IS_TORNADO=8, + EEPROM_8BIT=0x10, /* AKPM: Uses 0x230 as the base bitmaps for EEPROM reads */ + HAS_PWR_CTRL=0x20, HAS_MII=0x40, HAS_NWAY=0x80, HAS_CB_FNS=0x100, + INVERT_MII_PWR=0x200, INVERT_LED_PWR=0x400, MAX_COLLISION_RESET=0x800, + EEPROM_OFFSET=0x1000, HAS_HWCKSM=0x2000, WNO_XCVR_PWR=0x4000, + EXTRA_PREAMBLE=0x8000, EEPROM_RESET=0x10000, }; + +enum vortex_chips { + CH_3C590 = 0, + CH_3C592, + CH_3C597, + CH_3C595_1, + CH_3C595_2, + + CH_3C595_3, + CH_3C900_1, + CH_3C900_2, + CH_3C900_3, + CH_3C900_4, + + CH_3C900_5, + CH_3C900B_FL, + CH_3C905_1, + CH_3C905_2, + CH_3C905B_TX, + CH_3C905B_1, + + CH_3C905B_2, + CH_3C905B_FX, + CH_3C905C, + CH_3C9202, + CH_3C980, + CH_3C9805, + + CH_3CSOHO100_TX, + CH_3C555, + CH_3C556, + CH_3C556B, + CH_3C575, + + CH_3C575_1, + CH_3CCFE575, + CH_3CCFE575CT, + CH_3CCFE656, + CH_3CCFEM656, + + CH_3CCFEM656_1, + CH_3C450, + CH_3C920, + CH_3C982A, + CH_3C982B, + + CH_905BT4, + CH_920B_EMB_WNM, +}; + + +/* note: this array directly indexed by above enums, and MUST + * be kept in sync with both the enums above, and the PCI device + * table below + */ +static struct vortex_chip_info { + const char *name; + int flags; + int drv_flags; + int io_size; +} vortex_info_tbl[] __devinitdata = { + {"3c590 Vortex 10Mbps", + PCI_USES_MASTER, IS_VORTEX, 32, }, + {"3c592 EISA 10Mbps Demon/Vortex", /* AKPM: from Don's 3c59x_cb.c 0.49H */ + PCI_USES_MASTER, IS_VORTEX, 32, }, + {"3c597 EISA Fast Demon/Vortex", /* AKPM: from Don's 3c59x_cb.c 0.49H */ + PCI_USES_MASTER, IS_VORTEX, 32, }, + {"3c595 Vortex 100baseTx", + PCI_USES_MASTER, IS_VORTEX, 32, }, + {"3c595 Vortex 100baseT4", + PCI_USES_MASTER, IS_VORTEX, 32, }, + + {"3c595 Vortex 100base-MII", + PCI_USES_MASTER, IS_VORTEX, 32, }, + {"3c900 Boomerang 10baseT", + PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, }, + {"3c900 Boomerang 10Mbps Combo", + PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, }, + {"3c900 Cyclone 10Mbps TPO", /* AKPM: from Don's 0.99M */ + PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, + {"3c900 Cyclone 10Mbps Combo", + PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, + + {"3c900 Cyclone 10Mbps TPC", /* AKPM: from Don's 0.99M */ + PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, + {"3c900B-FL Cyclone 10base-FL", + PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, + {"3c905 Boomerang 100baseTx", + PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, }, + {"3c905 Boomerang 100baseT4", + PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, }, + {"3C905B-TX Fast Etherlink XL PCI", + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, + {"3c905B Cyclone 100baseTx", + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, + + {"3c905B Cyclone 10/100/BNC", + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, }, + {"3c905B-FX Cyclone 100baseFx", + PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, + {"3c905C Tornado", + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, + {"3c920B-EMB-WNM (ATI Radeon 9100 IGP)", + PCI_USES_MASTER, IS_TORNADO|HAS_MII|HAS_HWCKSM, 128, }, + {"3c980 Cyclone", + PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, + + {"3c980C Python-T", + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, }, + {"3cSOHO100-TX Hurricane", + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, + {"3c555 Laptop Hurricane", + PCI_USES_MASTER, IS_CYCLONE|EEPROM_8BIT|HAS_HWCKSM, 128, }, + {"3c556 Laptop Tornado", + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_8BIT|HAS_CB_FNS|INVERT_MII_PWR| + HAS_HWCKSM, 128, }, + {"3c556B Laptop Hurricane", + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_OFFSET|HAS_CB_FNS|INVERT_MII_PWR| + WNO_XCVR_PWR|HAS_HWCKSM, 128, }, + + {"3c575 [Megahertz] 10/100 LAN CardBus", + PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, }, + {"3c575 Boomerang CardBus", + PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, }, + {"3CCFE575BT Cyclone CardBus", + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT| + INVERT_LED_PWR|HAS_HWCKSM, 128, }, + {"3CCFE575CT Tornado CardBus", + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| + MAX_COLLISION_RESET|HAS_HWCKSM, 128, }, + {"3CCFE656 Cyclone CardBus", + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| + INVERT_LED_PWR|HAS_HWCKSM, 128, }, + + {"3CCFEM656B Cyclone+Winmodem CardBus", + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| + INVERT_LED_PWR|HAS_HWCKSM, 128, }, + {"3CXFEM656C Tornado+Winmodem CardBus", /* From pcmcia-cs-3.1.5 */ + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| + MAX_COLLISION_RESET|HAS_HWCKSM, 128, }, + {"3c450 HomePNA Tornado", /* AKPM: from Don's 0.99Q */ + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, }, + {"3c920 Tornado", + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, }, + {"3c982 Hydra Dual Port A", + PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, }, + + {"3c982 Hydra Dual Port B", + PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, }, + {"3c905B-T4", + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, + {"3c920B-EMB-WNM Tornado", + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, }, + + {NULL,}, /* NULL terminated list. */ +}; + + +static DEFINE_PCI_DEVICE_TABLE(vortex_pci_tbl) = { + { 0x10B7, 0x5900, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C590 }, + { 0x10B7, 0x5920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C592 }, + { 0x10B7, 0x5970, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C597 }, + { 0x10B7, 0x5950, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C595_1 }, + { 0x10B7, 0x5951, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C595_2 }, + + { 0x10B7, 0x5952, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C595_3 }, + { 0x10B7, 0x9000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_1 }, + { 0x10B7, 0x9001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_2 }, + { 0x10B7, 0x9004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_3 }, + { 0x10B7, 0x9005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_4 }, + + { 0x10B7, 0x9006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_5 }, + { 0x10B7, 0x900A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900B_FL }, + { 0x10B7, 0x9050, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_1 }, + { 0x10B7, 0x9051, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_2 }, + { 0x10B7, 0x9054, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_TX }, + { 0x10B7, 0x9055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_1 }, + + { 0x10B7, 0x9058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_2 }, + { 0x10B7, 0x905A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_FX }, + { 0x10B7, 0x9200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905C }, + { 0x10B7, 0x9202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C9202 }, + { 0x10B7, 0x9800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C980 }, + { 0x10B7, 0x9805, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C9805 }, + + { 0x10B7, 0x7646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CSOHO100_TX }, + { 0x10B7, 0x5055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C555 }, + { 0x10B7, 0x6055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C556 }, + { 0x10B7, 0x6056, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C556B }, + { 0x10B7, 0x5b57, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C575 }, + + { 0x10B7, 0x5057, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C575_1 }, + { 0x10B7, 0x5157, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFE575 }, + { 0x10B7, 0x5257, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFE575CT }, + { 0x10B7, 0x6560, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFE656 }, + { 0x10B7, 0x6562, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFEM656 }, + + { 0x10B7, 0x6564, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFEM656_1 }, + { 0x10B7, 0x4500, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C450 }, + { 0x10B7, 0x9201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C920 }, + { 0x10B7, 0x1201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C982A }, + { 0x10B7, 0x1202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C982B }, + + { 0x10B7, 0x9056, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_905BT4 }, + { 0x10B7, 0x9210, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_920B_EMB_WNM }, + + {0,} /* 0 terminated list. */ +}; +MODULE_DEVICE_TABLE(pci, vortex_pci_tbl); + + +/* Operational definitions. + These are not used by other compilation units and thus are not + exported in a ".h" file. + + First the windows. There are eight register windows, with the command + and status registers available in each. + */ +#define EL3_CMD 0x0e +#define EL3_STATUS 0x0e + +/* The top five bits written to EL3_CMD are a command, the lower + 11 bits are the parameter, if applicable. + Note that 11 parameters bits was fine for ethernet, but the new chip + can handle FDDI length frames (~4500 octets) and now parameters count + 32-bit 'Dwords' rather than octets. */ + +enum vortex_cmd { + TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11, + RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, + UpStall = 6<<11, UpUnstall = (6<<11)+1, + DownStall = (6<<11)+2, DownUnstall = (6<<11)+3, + RxDiscard = 8<<11, TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11, + FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11, + SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11, + SetTxThreshold = 18<<11, SetTxStart = 19<<11, + StartDMAUp = 20<<11, StartDMADown = (20<<11)+1, StatsEnable = 21<<11, + StatsDisable = 22<<11, StopCoax = 23<<11, SetFilterBit = 25<<11,}; + +/* The SetRxFilter command accepts the following classes: */ +enum RxFilter { + RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 }; + +/* Bits in the general status register. */ +enum vortex_status { + IntLatch = 0x0001, HostError = 0x0002, TxComplete = 0x0004, + TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020, + IntReq = 0x0040, StatsFull = 0x0080, + DMADone = 1<<8, DownComplete = 1<<9, UpComplete = 1<<10, + DMAInProgress = 1<<11, /* DMA controller is still busy.*/ + CmdInProgress = 1<<12, /* EL3_CMD is still busy.*/ +}; + +/* Register window 1 offsets, the window used in normal operation. + On the Vortex this window is always mapped at offsets 0x10-0x1f. */ +enum Window1 { + TX_FIFO = 0x10, RX_FIFO = 0x10, RxErrors = 0x14, + RxStatus = 0x18, Timer=0x1A, TxStatus = 0x1B, + TxFree = 0x1C, /* Remaining free bytes in Tx buffer. */ +}; +enum Window0 { + Wn0EepromCmd = 10, /* Window 0: EEPROM command register. */ + Wn0EepromData = 12, /* Window 0: EEPROM results register. */ + IntrStatus=0x0E, /* Valid in all windows. */ +}; +enum Win0_EEPROM_bits { + EEPROM_Read = 0x80, EEPROM_WRITE = 0x40, EEPROM_ERASE = 0xC0, + EEPROM_EWENB = 0x30, /* Enable erasing/writing for 10 msec. */ + EEPROM_EWDIS = 0x00, /* Disable EWENB before 10 msec timeout. */ +}; +/* EEPROM locations. */ +enum eeprom_offset { + PhysAddr01=0, PhysAddr23=1, PhysAddr45=2, ModelID=3, + EtherLink3ID=7, IFXcvrIO=8, IRQLine=9, + NodeAddr01=10, NodeAddr23=11, NodeAddr45=12, + DriverTune=13, Checksum=15}; + +enum Window2 { /* Window 2. */ + Wn2_ResetOptions=12, +}; +enum Window3 { /* Window 3: MAC/config bits. */ + Wn3_Config=0, Wn3_MaxPktSize=4, Wn3_MAC_Ctrl=6, Wn3_Options=8, +}; + +#define BFEXT(value, offset, bitcount) \ + ((((unsigned long)(value)) >> (offset)) & ((1 << (bitcount)) - 1)) + +#define BFINS(lhs, rhs, offset, bitcount) \ + (((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) | \ + (((rhs) & ((1 << (bitcount)) - 1)) << (offset))) + +#define RAM_SIZE(v) BFEXT(v, 0, 3) +#define RAM_WIDTH(v) BFEXT(v, 3, 1) +#define RAM_SPEED(v) BFEXT(v, 4, 2) +#define ROM_SIZE(v) BFEXT(v, 6, 2) +#define RAM_SPLIT(v) BFEXT(v, 16, 2) +#define XCVR(v) BFEXT(v, 20, 4) +#define AUTOSELECT(v) BFEXT(v, 24, 1) + +enum Window4 { /* Window 4: Xcvr/media bits. */ + Wn4_FIFODiag = 4, Wn4_NetDiag = 6, Wn4_PhysicalMgmt=8, Wn4_Media = 10, +}; +enum Win4_Media_bits { + Media_SQE = 0x0008, /* Enable SQE error counting for AUI. */ + Media_10TP = 0x00C0, /* Enable link beat and jabber for 10baseT. */ + Media_Lnk = 0x0080, /* Enable just link beat for 100TX/100FX. */ + Media_LnkBeat = 0x0800, +}; +enum Window7 { /* Window 7: Bus Master control. */ + Wn7_MasterAddr = 0, Wn7_VlanEtherType=4, Wn7_MasterLen = 6, + Wn7_MasterStatus = 12, +}; +/* Boomerang bus master control registers. */ +enum MasterCtrl { + PktStatus = 0x20, DownListPtr = 0x24, FragAddr = 0x28, FragLen = 0x2c, + TxFreeThreshold = 0x2f, UpPktStatus = 0x30, UpListPtr = 0x38, +}; + +/* The Rx and Tx descriptor lists. + Caution Alpha hackers: these types are 32 bits! Note also the 8 byte + alignment contraint on tx_ring[] and rx_ring[]. */ +#define LAST_FRAG 0x80000000 /* Last Addr/Len pair in descriptor. */ +#define DN_COMPLETE 0x00010000 /* This packet has been downloaded */ +struct boom_rx_desc { + __le32 next; /* Last entry points to 0. */ + __le32 status; + __le32 addr; /* Up to 63 addr/len pairs possible. */ + __le32 length; /* Set LAST_FRAG to indicate last pair. */ +}; +/* Values for the Rx status entry. */ +enum rx_desc_status { + RxDComplete=0x00008000, RxDError=0x4000, + /* See boomerang_rx() for actual error bits */ + IPChksumErr=1<<25, TCPChksumErr=1<<26, UDPChksumErr=1<<27, + IPChksumValid=1<<29, TCPChksumValid=1<<30, UDPChksumValid=1<<31, +}; + +#ifdef MAX_SKB_FRAGS +#define DO_ZEROCOPY 1 +#else +#define DO_ZEROCOPY 0 +#endif + +struct boom_tx_desc { + __le32 next; /* Last entry points to 0. */ + __le32 status; /* bits 0:12 length, others see below. */ +#if DO_ZEROCOPY + struct { + __le32 addr; + __le32 length; + } frag[1+MAX_SKB_FRAGS]; +#else + __le32 addr; + __le32 length; +#endif +}; + +/* Values for the Tx status entry. */ +enum tx_desc_status { + CRCDisable=0x2000, TxDComplete=0x8000, + AddIPChksum=0x02000000, AddTCPChksum=0x04000000, AddUDPChksum=0x08000000, + TxIntrUploaded=0x80000000, /* IRQ when in FIFO, but maybe not sent. */ +}; + +/* Chip features we care about in vp->capabilities, read from the EEPROM. */ +enum ChipCaps { CapBusMaster=0x20, CapPwrMgmt=0x2000 }; + +struct vortex_extra_stats { + unsigned long tx_deferred; + unsigned long tx_max_collisions; + unsigned long tx_multiple_collisions; + unsigned long tx_single_collisions; + unsigned long rx_bad_ssd; +}; + +struct vortex_private { + /* The Rx and Tx rings should be quad-word-aligned. */ + struct boom_rx_desc* rx_ring; + struct boom_tx_desc* tx_ring; + dma_addr_t rx_ring_dma; + dma_addr_t tx_ring_dma; + /* The addresses of transmit- and receive-in-place skbuffs. */ + struct sk_buff* rx_skbuff[RX_RING_SIZE]; + struct sk_buff* tx_skbuff[TX_RING_SIZE]; + unsigned int cur_rx, cur_tx; /* The next free ring entry */ + unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */ + struct vortex_extra_stats xstats; /* NIC-specific extra stats */ + struct sk_buff *tx_skb; /* Packet being eaten by bus master ctrl. */ + dma_addr_t tx_skb_dma; /* Allocated DMA address for bus master ctrl DMA. */ + + /* PCI configuration space information. */ + struct device *gendev; + void __iomem *ioaddr; /* IO address space */ + void __iomem *cb_fn_base; /* CardBus function status addr space. */ + + /* Some values here only for performance evaluation and path-coverage */ + int rx_nocopy, rx_copy, queued_packet, rx_csumhits; + int card_idx; + + /* The remainder are related to chip state, mostly media selection. */ + struct timer_list timer; /* Media selection timer. */ + struct timer_list rx_oom_timer; /* Rx skb allocation retry timer */ + int options; /* User-settable misc. driver options. */ + unsigned int media_override:4, /* Passed-in media type. */ + default_media:4, /* Read from the EEPROM/Wn3_Config. */ + full_duplex:1, autoselect:1, + bus_master:1, /* Vortex can only do a fragment bus-m. */ + full_bus_master_tx:1, full_bus_master_rx:2, /* Boomerang */ + flow_ctrl:1, /* Use 802.3x flow control (PAUSE only) */ + partner_flow_ctrl:1, /* Partner supports flow control */ + has_nway:1, + enable_wol:1, /* Wake-on-LAN is enabled */ + pm_state_valid:1, /* pci_dev->saved_config_space has sane contents */ + open:1, + medialock:1, + must_free_region:1, /* Flag: if zero, Cardbus owns the I/O region */ + large_frames:1, /* accept large frames */ + handling_irq:1; /* private in_irq indicator */ + /* {get|set}_wol operations are already serialized by rtnl. + * no additional locking is required for the enable_wol and acpi_set_WOL() + */ + int drv_flags; + u16 status_enable; + u16 intr_enable; + u16 available_media; /* From Wn3_Options. */ + u16 capabilities, info1, info2; /* Various, from EEPROM. */ + u16 advertising; /* NWay media advertisement */ + unsigned char phys[2]; /* MII device addresses. */ + u16 deferred; /* Resend these interrupts when we + * bale from the ISR */ + u16 io_size; /* Size of PCI region (for release_region) */ + + /* Serialises access to hardware other than MII and variables below. + * The lock hierarchy is rtnl_lock > {lock, mii_lock} > window_lock. */ + spinlock_t lock; + + spinlock_t mii_lock; /* Serialises access to MII */ + struct mii_if_info mii; /* MII lib hooks/info */ + spinlock_t window_lock; /* Serialises access to windowed regs */ + int window; /* Register window */ +}; + +static void window_set(struct vortex_private *vp, int window) +{ + if (window != vp->window) { + iowrite16(SelectWindow + window, vp->ioaddr + EL3_CMD); + vp->window = window; + } +} + +#define DEFINE_WINDOW_IO(size) \ +static u ## size \ +window_read ## size(struct vortex_private *vp, int window, int addr) \ +{ \ + unsigned long flags; \ + u ## size ret; \ + spin_lock_irqsave(&vp->window_lock, flags); \ + window_set(vp, window); \ + ret = ioread ## size(vp->ioaddr + addr); \ + spin_unlock_irqrestore(&vp->window_lock, flags); \ + return ret; \ +} \ +static void \ +window_write ## size(struct vortex_private *vp, u ## size value, \ + int window, int addr) \ +{ \ + unsigned long flags; \ + spin_lock_irqsave(&vp->window_lock, flags); \ + window_set(vp, window); \ + iowrite ## size(value, vp->ioaddr + addr); \ + spin_unlock_irqrestore(&vp->window_lock, flags); \ +} +DEFINE_WINDOW_IO(8) +DEFINE_WINDOW_IO(16) +DEFINE_WINDOW_IO(32) + +#ifdef CONFIG_PCI +#define DEVICE_PCI(dev) (((dev)->bus == &pci_bus_type) ? to_pci_dev((dev)) : NULL) +#else +#define DEVICE_PCI(dev) NULL +#endif + +#define VORTEX_PCI(vp) \ + ((struct pci_dev *) (((vp)->gendev) ? DEVICE_PCI((vp)->gendev) : NULL)) + +#ifdef CONFIG_EISA +#define DEVICE_EISA(dev) (((dev)->bus == &eisa_bus_type) ? to_eisa_device((dev)) : NULL) +#else +#define DEVICE_EISA(dev) NULL +#endif + +#define VORTEX_EISA(vp) \ + ((struct eisa_device *) (((vp)->gendev) ? DEVICE_EISA((vp)->gendev) : NULL)) + +/* The action to take with a media selection timer tick. + Note that we deviate from the 3Com order by checking 10base2 before AUI. + */ +enum xcvr_types { + XCVR_10baseT=0, XCVR_AUI, XCVR_10baseTOnly, XCVR_10base2, XCVR_100baseTx, + XCVR_100baseFx, XCVR_MII=6, XCVR_NWAY=8, XCVR_ExtMII=9, XCVR_Default=10, +}; + +static const struct media_table { + char *name; + unsigned int media_bits:16, /* Bits to set in Wn4_Media register. */ + mask:8, /* The transceiver-present bit in Wn3_Config.*/ + next:8; /* The media type to try next. */ + int wait; /* Time before we check media status. */ +} media_tbl[] = { + { "10baseT", Media_10TP,0x08, XCVR_10base2, (14*HZ)/10}, + { "10Mbs AUI", Media_SQE, 0x20, XCVR_Default, (1*HZ)/10}, + { "undefined", 0, 0x80, XCVR_10baseT, 10000}, + { "10base2", 0, 0x10, XCVR_AUI, (1*HZ)/10}, + { "100baseTX", Media_Lnk, 0x02, XCVR_100baseFx, (14*HZ)/10}, + { "100baseFX", Media_Lnk, 0x04, XCVR_MII, (14*HZ)/10}, + { "MII", 0, 0x41, XCVR_10baseT, 3*HZ }, + { "undefined", 0, 0x01, XCVR_10baseT, 10000}, + { "Autonegotiate", 0, 0x41, XCVR_10baseT, 3*HZ}, + { "MII-External", 0, 0x41, XCVR_10baseT, 3*HZ }, + { "Default", 0, 0xFF, XCVR_10baseT, 10000}, +}; + +static struct { + const char str[ETH_GSTRING_LEN]; +} ethtool_stats_keys[] = { + { "tx_deferred" }, + { "tx_max_collisions" }, + { "tx_multiple_collisions" }, + { "tx_single_collisions" }, + { "rx_bad_ssd" }, +}; + +/* number of ETHTOOL_GSTATS u64's */ +#define VORTEX_NUM_STATS 5 + +static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq, + int chip_idx, int card_idx); +static int vortex_up(struct net_device *dev); +static void vortex_down(struct net_device *dev, int final); +static int vortex_open(struct net_device *dev); +static void mdio_sync(struct vortex_private *vp, int bits); +static int mdio_read(struct net_device *dev, int phy_id, int location); +static void mdio_write(struct net_device *vp, int phy_id, int location, int value); +static void vortex_timer(unsigned long arg); +static void rx_oom_timer(unsigned long arg); +static netdev_tx_t vortex_start_xmit(struct sk_buff *skb, + struct net_device *dev); +static netdev_tx_t boomerang_start_xmit(struct sk_buff *skb, + struct net_device *dev); +static int vortex_rx(struct net_device *dev); +static int boomerang_rx(struct net_device *dev); +static irqreturn_t vortex_interrupt(int irq, void *dev_id); +static irqreturn_t boomerang_interrupt(int irq, void *dev_id); +static int vortex_close(struct net_device *dev); +static void dump_tx_ring(struct net_device *dev); +static void update_stats(void __iomem *ioaddr, struct net_device *dev); +static struct net_device_stats *vortex_get_stats(struct net_device *dev); +static void set_rx_mode(struct net_device *dev); +#ifdef CONFIG_PCI +static int vortex_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +#endif +static void vortex_tx_timeout(struct net_device *dev); +static void acpi_set_WOL(struct net_device *dev); +static const struct ethtool_ops vortex_ethtool_ops; +static void set_8021q_mode(struct net_device *dev, int enable); + +/* This driver uses 'options' to pass the media type, full-duplex flag, etc. */ +/* Option count limit only -- unlimited interfaces are supported. */ +#define MAX_UNITS 8 +static int options[MAX_UNITS] = { [0 ... MAX_UNITS-1] = -1 }; +static int full_duplex[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; +static int hw_checksums[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; +static int flow_ctrl[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; +static int enable_wol[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; +static int use_mmio[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; +static int global_options = -1; +static int global_full_duplex = -1; +static int global_enable_wol = -1; +static int global_use_mmio = -1; + +/* Variables to work-around the Compaq PCI BIOS32 problem. */ +static int compaq_ioaddr, compaq_irq, compaq_device_id = 0x5900; +static struct net_device *compaq_net_device; + +static int vortex_cards_found; + +module_param(debug, int, 0); +module_param(global_options, int, 0); +module_param_array(options, int, NULL, 0); +module_param(global_full_duplex, int, 0); +module_param_array(full_duplex, int, NULL, 0); +module_param_array(hw_checksums, int, NULL, 0); +module_param_array(flow_ctrl, int, NULL, 0); +module_param(global_enable_wol, int, 0); +module_param_array(enable_wol, int, NULL, 0); +module_param(rx_copybreak, int, 0); +module_param(max_interrupt_work, int, 0); +module_param(compaq_ioaddr, int, 0); +module_param(compaq_irq, int, 0); +module_param(compaq_device_id, int, 0); +module_param(watchdog, int, 0); +module_param(global_use_mmio, int, 0); +module_param_array(use_mmio, int, NULL, 0); +MODULE_PARM_DESC(debug, "3c59x debug level (0-6)"); +MODULE_PARM_DESC(options, "3c59x: Bits 0-3: media type, bit 4: bus mastering, bit 9: full duplex"); +MODULE_PARM_DESC(global_options, "3c59x: same as options, but applies to all NICs if options is unset"); +MODULE_PARM_DESC(full_duplex, "3c59x full duplex setting(s) (1)"); +MODULE_PARM_DESC(global_full_duplex, "3c59x: same as full_duplex, but applies to all NICs if full_duplex is unset"); +MODULE_PARM_DESC(hw_checksums, "3c59x Hardware checksum checking by adapter(s) (0-1)"); +MODULE_PARM_DESC(flow_ctrl, "3c59x 802.3x flow control usage (PAUSE only) (0-1)"); +MODULE_PARM_DESC(enable_wol, "3c59x: Turn on Wake-on-LAN for adapter(s) (0-1)"); +MODULE_PARM_DESC(global_enable_wol, "3c59x: same as enable_wol, but applies to all NICs if enable_wol is unset"); +MODULE_PARM_DESC(rx_copybreak, "3c59x copy breakpoint for copy-only-tiny-frames"); +MODULE_PARM_DESC(max_interrupt_work, "3c59x maximum events handled per interrupt"); +MODULE_PARM_DESC(compaq_ioaddr, "3c59x PCI I/O base address (Compaq BIOS problem workaround)"); +MODULE_PARM_DESC(compaq_irq, "3c59x PCI IRQ number (Compaq BIOS problem workaround)"); +MODULE_PARM_DESC(compaq_device_id, "3c59x PCI device ID (Compaq BIOS problem workaround)"); +MODULE_PARM_DESC(watchdog, "3c59x transmit timeout in milliseconds"); +MODULE_PARM_DESC(global_use_mmio, "3c59x: same as use_mmio, but applies to all NICs if options is unset"); +MODULE_PARM_DESC(use_mmio, "3c59x: use memory-mapped PCI I/O resource (0-1)"); + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void poll_vortex(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + unsigned long flags; + local_irq_save(flags); + (vp->full_bus_master_rx ? boomerang_interrupt:vortex_interrupt)(dev->irq,dev); + local_irq_restore(flags); +} +#endif + +#ifdef CONFIG_PM + +static int vortex_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct net_device *ndev = pci_get_drvdata(pdev); + + if (!ndev || !netif_running(ndev)) + return 0; + + netif_device_detach(ndev); + vortex_down(ndev, 1); + + return 0; +} + +static int vortex_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct net_device *ndev = pci_get_drvdata(pdev); + int err; + + if (!ndev || !netif_running(ndev)) + return 0; + + err = vortex_up(ndev); + if (err) + return err; + + netif_device_attach(ndev); + + return 0; +} + +static const struct dev_pm_ops vortex_pm_ops = { + .suspend = vortex_suspend, + .resume = vortex_resume, + .freeze = vortex_suspend, + .thaw = vortex_resume, + .poweroff = vortex_suspend, + .restore = vortex_resume, +}; + +#define VORTEX_PM_OPS (&vortex_pm_ops) + +#else /* !CONFIG_PM */ + +#define VORTEX_PM_OPS NULL + +#endif /* !CONFIG_PM */ + +#ifdef CONFIG_EISA +static struct eisa_device_id vortex_eisa_ids[] = { + { "TCM5920", CH_3C592 }, + { "TCM5970", CH_3C597 }, + { "" } +}; +MODULE_DEVICE_TABLE(eisa, vortex_eisa_ids); + +static int __init vortex_eisa_probe(struct device *device) +{ + void __iomem *ioaddr; + struct eisa_device *edev; + + edev = to_eisa_device(device); + + if (!request_region(edev->base_addr, VORTEX_TOTAL_SIZE, DRV_NAME)) + return -EBUSY; + + ioaddr = ioport_map(edev->base_addr, VORTEX_TOTAL_SIZE); + + if (vortex_probe1(device, ioaddr, ioread16(ioaddr + 0xC88) >> 12, + edev->id.driver_data, vortex_cards_found)) { + release_region(edev->base_addr, VORTEX_TOTAL_SIZE); + return -ENODEV; + } + + vortex_cards_found++; + + return 0; +} + +static int __devexit vortex_eisa_remove(struct device *device) +{ + struct eisa_device *edev; + struct net_device *dev; + struct vortex_private *vp; + void __iomem *ioaddr; + + edev = to_eisa_device(device); + dev = eisa_get_drvdata(edev); + + if (!dev) { + pr_err("vortex_eisa_remove called for Compaq device!\n"); + BUG(); + } + + vp = netdev_priv(dev); + ioaddr = vp->ioaddr; + + unregister_netdev(dev); + iowrite16(TotalReset|0x14, ioaddr + EL3_CMD); + release_region(dev->base_addr, VORTEX_TOTAL_SIZE); + + free_netdev(dev); + return 0; +} + +static struct eisa_driver vortex_eisa_driver = { + .id_table = vortex_eisa_ids, + .driver = { + .name = "3c59x", + .probe = vortex_eisa_probe, + .remove = __devexit_p(vortex_eisa_remove) + } +}; + +#endif /* CONFIG_EISA */ + +/* returns count found (>= 0), or negative on error */ +static int __init vortex_eisa_init(void) +{ + int eisa_found = 0; + int orig_cards_found = vortex_cards_found; + +#ifdef CONFIG_EISA + int err; + + err = eisa_driver_register (&vortex_eisa_driver); + if (!err) { + /* + * Because of the way EISA bus is probed, we cannot assume + * any device have been found when we exit from + * eisa_driver_register (the bus root driver may not be + * initialized yet). So we blindly assume something was + * found, and let the sysfs magic happened... + */ + eisa_found = 1; + } +#endif + + /* Special code to work-around the Compaq PCI BIOS32 problem. */ + if (compaq_ioaddr) { + vortex_probe1(NULL, ioport_map(compaq_ioaddr, VORTEX_TOTAL_SIZE), + compaq_irq, compaq_device_id, vortex_cards_found++); + } + + return vortex_cards_found - orig_cards_found + eisa_found; +} + +/* returns count (>= 0), or negative on error */ +static int __devinit vortex_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int rc, unit, pci_bar; + struct vortex_chip_info *vci; + void __iomem *ioaddr; + + /* wake up and enable device */ + rc = pci_enable_device(pdev); + if (rc < 0) + goto out; + + unit = vortex_cards_found; + + if (global_use_mmio < 0 && (unit >= MAX_UNITS || use_mmio[unit] < 0)) { + /* Determine the default if the user didn't override us */ + vci = &vortex_info_tbl[ent->driver_data]; + pci_bar = vci->drv_flags & (IS_CYCLONE | IS_TORNADO) ? 1 : 0; + } else if (unit < MAX_UNITS && use_mmio[unit] >= 0) + pci_bar = use_mmio[unit] ? 1 : 0; + else + pci_bar = global_use_mmio ? 1 : 0; + + ioaddr = pci_iomap(pdev, pci_bar, 0); + if (!ioaddr) /* If mapping fails, fall-back to BAR 0... */ + ioaddr = pci_iomap(pdev, 0, 0); + if (!ioaddr) { + pci_disable_device(pdev); + rc = -ENOMEM; + goto out; + } + + rc = vortex_probe1(&pdev->dev, ioaddr, pdev->irq, + ent->driver_data, unit); + if (rc < 0) { + pci_iounmap(pdev, ioaddr); + pci_disable_device(pdev); + goto out; + } + + vortex_cards_found++; + +out: + return rc; +} + +static const struct net_device_ops boomrang_netdev_ops = { + .ndo_open = vortex_open, + .ndo_stop = vortex_close, + .ndo_start_xmit = boomerang_start_xmit, + .ndo_tx_timeout = vortex_tx_timeout, + .ndo_get_stats = vortex_get_stats, +#ifdef CONFIG_PCI + .ndo_do_ioctl = vortex_ioctl, +#endif + .ndo_set_multicast_list = set_rx_mode, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = poll_vortex, +#endif +}; + +static const struct net_device_ops vortex_netdev_ops = { + .ndo_open = vortex_open, + .ndo_stop = vortex_close, + .ndo_start_xmit = vortex_start_xmit, + .ndo_tx_timeout = vortex_tx_timeout, + .ndo_get_stats = vortex_get_stats, +#ifdef CONFIG_PCI + .ndo_do_ioctl = vortex_ioctl, +#endif + .ndo_set_multicast_list = set_rx_mode, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = poll_vortex, +#endif +}; + +/* + * Start up the PCI/EISA device which is described by *gendev. + * Return 0 on success. + * + * NOTE: pdev can be NULL, for the case of a Compaq device + */ +static int __devinit vortex_probe1(struct device *gendev, + void __iomem *ioaddr, int irq, + int chip_idx, int card_idx) +{ + struct vortex_private *vp; + int option; + unsigned int eeprom[0x40], checksum = 0; /* EEPROM contents */ + int i, step; + struct net_device *dev; + static int printed_version; + int retval, print_info; + struct vortex_chip_info * const vci = &vortex_info_tbl[chip_idx]; + const char *print_name = "3c59x"; + struct pci_dev *pdev = NULL; + struct eisa_device *edev = NULL; + + if (!printed_version) { + pr_info("%s", version); + printed_version = 1; + } + + if (gendev) { + if ((pdev = DEVICE_PCI(gendev))) { + print_name = pci_name(pdev); + } + + if ((edev = DEVICE_EISA(gendev))) { + print_name = dev_name(&edev->dev); + } + } + + dev = alloc_etherdev(sizeof(*vp)); + retval = -ENOMEM; + if (!dev) { + pr_err(PFX "unable to allocate etherdev, aborting\n"); + goto out; + } + SET_NETDEV_DEV(dev, gendev); + vp = netdev_priv(dev); + + option = global_options; + + /* The lower four bits are the media type. */ + if (dev->mem_start) { + /* + * The 'options' param is passed in as the third arg to the + * LILO 'ether=' argument for non-modular use + */ + option = dev->mem_start; + } + else if (card_idx < MAX_UNITS) { + if (options[card_idx] >= 0) + option = options[card_idx]; + } + + if (option > 0) { + if (option & 0x8000) + vortex_debug = 7; + if (option & 0x4000) + vortex_debug = 2; + if (option & 0x0400) + vp->enable_wol = 1; + } + + print_info = (vortex_debug > 1); + if (print_info) + pr_info("See Documentation/networking/vortex.txt\n"); + + pr_info("%s: 3Com %s %s at %p.\n", + print_name, + pdev ? "PCI" : "EISA", + vci->name, + ioaddr); + + dev->base_addr = (unsigned long)ioaddr; + dev->irq = irq; + dev->mtu = mtu; + vp->ioaddr = ioaddr; + vp->large_frames = mtu > 1500; + vp->drv_flags = vci->drv_flags; + vp->has_nway = (vci->drv_flags & HAS_NWAY) ? 1 : 0; + vp->io_size = vci->io_size; + vp->card_idx = card_idx; + vp->window = -1; + + /* module list only for Compaq device */ + if (gendev == NULL) { + compaq_net_device = dev; + } + + /* PCI-only startup logic */ + if (pdev) { + /* EISA resources already marked, so only PCI needs to do this here */ + /* Ignore return value, because Cardbus drivers already allocate for us */ + if (request_region(dev->base_addr, vci->io_size, print_name) != NULL) + vp->must_free_region = 1; + + /* enable bus-mastering if necessary */ + if (vci->flags & PCI_USES_MASTER) + pci_set_master(pdev); + + if (vci->drv_flags & IS_VORTEX) { + u8 pci_latency; + u8 new_latency = 248; + + /* Check the PCI latency value. On the 3c590 series the latency timer + must be set to the maximum value to avoid data corruption that occurs + when the timer expires during a transfer. This bug exists the Vortex + chip only. */ + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency); + if (pci_latency < new_latency) { + pr_info("%s: Overriding PCI latency timer (CFLT) setting of %d, new value is %d.\n", + print_name, pci_latency, new_latency); + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, new_latency); + } + } + } + + spin_lock_init(&vp->lock); + spin_lock_init(&vp->mii_lock); + spin_lock_init(&vp->window_lock); + vp->gendev = gendev; + vp->mii.dev = dev; + vp->mii.mdio_read = mdio_read; + vp->mii.mdio_write = mdio_write; + vp->mii.phy_id_mask = 0x1f; + vp->mii.reg_num_mask = 0x1f; + + /* Makes sure rings are at least 16 byte aligned. */ + vp->rx_ring = pci_alloc_consistent(pdev, sizeof(struct boom_rx_desc) * RX_RING_SIZE + + sizeof(struct boom_tx_desc) * TX_RING_SIZE, + &vp->rx_ring_dma); + retval = -ENOMEM; + if (!vp->rx_ring) + goto free_region; + + vp->tx_ring = (struct boom_tx_desc *)(vp->rx_ring + RX_RING_SIZE); + vp->tx_ring_dma = vp->rx_ring_dma + sizeof(struct boom_rx_desc) * RX_RING_SIZE; + + /* if we are a PCI driver, we store info in pdev->driver_data + * instead of a module list */ + if (pdev) + pci_set_drvdata(pdev, dev); + if (edev) + eisa_set_drvdata(edev, dev); + + vp->media_override = 7; + if (option >= 0) { + vp->media_override = ((option & 7) == 2) ? 0 : option & 15; + if (vp->media_override != 7) + vp->medialock = 1; + vp->full_duplex = (option & 0x200) ? 1 : 0; + vp->bus_master = (option & 16) ? 1 : 0; + } + + if (global_full_duplex > 0) + vp->full_duplex = 1; + if (global_enable_wol > 0) + vp->enable_wol = 1; + + if (card_idx < MAX_UNITS) { + if (full_duplex[card_idx] > 0) + vp->full_duplex = 1; + if (flow_ctrl[card_idx] > 0) + vp->flow_ctrl = 1; + if (enable_wol[card_idx] > 0) + vp->enable_wol = 1; + } + + vp->mii.force_media = vp->full_duplex; + vp->options = option; + /* Read the station address from the EEPROM. */ + { + int base; + + if (vci->drv_flags & EEPROM_8BIT) + base = 0x230; + else if (vci->drv_flags & EEPROM_OFFSET) + base = EEPROM_Read + 0x30; + else + base = EEPROM_Read; + + for (i = 0; i < 0x40; i++) { + int timer; + window_write16(vp, base + i, 0, Wn0EepromCmd); + /* Pause for at least 162 us. for the read to take place. */ + for (timer = 10; timer >= 0; timer--) { + udelay(162); + if ((window_read16(vp, 0, Wn0EepromCmd) & + 0x8000) == 0) + break; + } + eeprom[i] = window_read16(vp, 0, Wn0EepromData); + } + } + for (i = 0; i < 0x18; i++) + checksum ^= eeprom[i]; + checksum = (checksum ^ (checksum >> 8)) & 0xff; + if (checksum != 0x00) { /* Grrr, needless incompatible change 3Com. */ + while (i < 0x21) + checksum ^= eeprom[i++]; + checksum = (checksum ^ (checksum >> 8)) & 0xff; + } + if ((checksum != 0x00) && !(vci->drv_flags & IS_TORNADO)) + pr_cont(" ***INVALID CHECKSUM %4.4x*** ", checksum); + for (i = 0; i < 3; i++) + ((__be16 *)dev->dev_addr)[i] = htons(eeprom[i + 10]); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); + if (print_info) + pr_cont(" %pM", dev->dev_addr); + /* Unfortunately an all zero eeprom passes the checksum and this + gets found in the wild in failure cases. Crypto is hard 8) */ + if (!is_valid_ether_addr(dev->dev_addr)) { + retval = -EINVAL; + pr_err("*** EEPROM MAC address is invalid.\n"); + goto free_ring; /* With every pack */ + } + for (i = 0; i < 6; i++) + window_write8(vp, dev->dev_addr[i], 2, i); + + if (print_info) + pr_cont(", IRQ %d\n", dev->irq); + /* Tell them about an invalid IRQ. */ + if (dev->irq <= 0 || dev->irq >= nr_irqs) + pr_warning(" *** Warning: IRQ %d is unlikely to work! ***\n", + dev->irq); + + step = (window_read8(vp, 4, Wn4_NetDiag) & 0x1e) >> 1; + if (print_info) { + pr_info(" product code %02x%02x rev %02x.%d date %02d-%02d-%02d\n", + eeprom[6]&0xff, eeprom[6]>>8, eeprom[0x14], + step, (eeprom[4]>>5) & 15, eeprom[4] & 31, eeprom[4]>>9); + } + + + if (pdev && vci->drv_flags & HAS_CB_FNS) { + unsigned short n; + + vp->cb_fn_base = pci_iomap(pdev, 2, 0); + if (!vp->cb_fn_base) { + retval = -ENOMEM; + goto free_ring; + } + + if (print_info) { + pr_info("%s: CardBus functions mapped %16.16llx->%p\n", + print_name, + (unsigned long long)pci_resource_start(pdev, 2), + vp->cb_fn_base); + } + + n = window_read16(vp, 2, Wn2_ResetOptions) & ~0x4010; + if (vp->drv_flags & INVERT_LED_PWR) + n |= 0x10; + if (vp->drv_flags & INVERT_MII_PWR) + n |= 0x4000; + window_write16(vp, n, 2, Wn2_ResetOptions); + if (vp->drv_flags & WNO_XCVR_PWR) { + window_write16(vp, 0x0800, 0, 0); + } + } + + /* Extract our information from the EEPROM data. */ + vp->info1 = eeprom[13]; + vp->info2 = eeprom[15]; + vp->capabilities = eeprom[16]; + + if (vp->info1 & 0x8000) { + vp->full_duplex = 1; + if (print_info) + pr_info("Full duplex capable\n"); + } + + { + static const char * const ram_split[] = {"5:3", "3:1", "1:1", "3:5"}; + unsigned int config; + vp->available_media = window_read16(vp, 3, Wn3_Options); + if ((vp->available_media & 0xff) == 0) /* Broken 3c916 */ + vp->available_media = 0x40; + config = window_read32(vp, 3, Wn3_Config); + if (print_info) { + pr_debug(" Internal config register is %4.4x, transceivers %#x.\n", + config, window_read16(vp, 3, Wn3_Options)); + pr_info(" %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n", + 8 << RAM_SIZE(config), + RAM_WIDTH(config) ? "word" : "byte", + ram_split[RAM_SPLIT(config)], + AUTOSELECT(config) ? "autoselect/" : "", + XCVR(config) > XCVR_ExtMII ? "<invalid transceiver>" : + media_tbl[XCVR(config)].name); + } + vp->default_media = XCVR(config); + if (vp->default_media == XCVR_NWAY) + vp->has_nway = 1; + vp->autoselect = AUTOSELECT(config); + } + + if (vp->media_override != 7) { + pr_info("%s: Media override to transceiver type %d (%s).\n", + print_name, vp->media_override, + media_tbl[vp->media_override].name); + dev->if_port = vp->media_override; + } else + dev->if_port = vp->default_media; + + if ((vp->available_media & 0x40) || (vci->drv_flags & HAS_NWAY) || + dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) { + int phy, phy_idx = 0; + mii_preamble_required++; + if (vp->drv_flags & EXTRA_PREAMBLE) + mii_preamble_required++; + mdio_sync(vp, 32); + mdio_read(dev, 24, MII_BMSR); + for (phy = 0; phy < 32 && phy_idx < 1; phy++) { + int mii_status, phyx; + + /* + * For the 3c905CX we look at index 24 first, because it bogusly + * reports an external PHY at all indices + */ + if (phy == 0) + phyx = 24; + else if (phy <= 24) + phyx = phy - 1; + else + phyx = phy; + mii_status = mdio_read(dev, phyx, MII_BMSR); + if (mii_status && mii_status != 0xffff) { + vp->phys[phy_idx++] = phyx; + if (print_info) { + pr_info(" MII transceiver found at address %d, status %4x.\n", + phyx, mii_status); + } + if ((mii_status & 0x0040) == 0) + mii_preamble_required++; + } + } + mii_preamble_required--; + if (phy_idx == 0) { + pr_warning(" ***WARNING*** No MII transceivers found!\n"); + vp->phys[0] = 24; + } else { + vp->advertising = mdio_read(dev, vp->phys[0], MII_ADVERTISE); + if (vp->full_duplex) { + /* Only advertise the FD media types. */ + vp->advertising &= ~0x02A0; + mdio_write(dev, vp->phys[0], 4, vp->advertising); + } + } + vp->mii.phy_id = vp->phys[0]; + } + + if (vp->capabilities & CapBusMaster) { + vp->full_bus_master_tx = 1; + if (print_info) { + pr_info(" Enabling bus-master transmits and %s receives.\n", + (vp->info2 & 1) ? "early" : "whole-frame" ); + } + vp->full_bus_master_rx = (vp->info2 & 1) ? 1 : 2; + vp->bus_master = 0; /* AKPM: vortex only */ + } + + /* The 3c59x-specific entries in the device structure. */ + if (vp->full_bus_master_tx) { + dev->netdev_ops = &boomrang_netdev_ops; + /* Actually, it still should work with iommu. */ + if (card_idx < MAX_UNITS && + ((hw_checksums[card_idx] == -1 && (vp->drv_flags & HAS_HWCKSM)) || + hw_checksums[card_idx] == 1)) { + dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; + } + } else + dev->netdev_ops = &vortex_netdev_ops; + + if (print_info) { + pr_info("%s: scatter/gather %sabled. h/w checksums %sabled\n", + print_name, + (dev->features & NETIF_F_SG) ? "en":"dis", + (dev->features & NETIF_F_IP_CSUM) ? "en":"dis"); + } + + dev->ethtool_ops = &vortex_ethtool_ops; + dev->watchdog_timeo = (watchdog * HZ) / 1000; + + if (pdev) { + vp->pm_state_valid = 1; + pci_save_state(VORTEX_PCI(vp)); + acpi_set_WOL(dev); + } + retval = register_netdev(dev); + if (retval == 0) + return 0; + +free_ring: + pci_free_consistent(pdev, + sizeof(struct boom_rx_desc) * RX_RING_SIZE + + sizeof(struct boom_tx_desc) * TX_RING_SIZE, + vp->rx_ring, + vp->rx_ring_dma); +free_region: + if (vp->must_free_region) + release_region(dev->base_addr, vci->io_size); + free_netdev(dev); + pr_err(PFX "vortex_probe1 fails. Returns %d\n", retval); +out: + return retval; +} + +static void +issue_and_wait(struct net_device *dev, int cmd) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + int i; + + iowrite16(cmd, ioaddr + EL3_CMD); + for (i = 0; i < 2000; i++) { + if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) + return; + } + + /* OK, that didn't work. Do it the slow way. One second */ + for (i = 0; i < 100000; i++) { + if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) { + if (vortex_debug > 1) + pr_info("%s: command 0x%04x took %d usecs\n", + dev->name, cmd, i * 10); + return; + } + udelay(10); + } + pr_err("%s: command 0x%04x did not complete! Status=0x%x\n", + dev->name, cmd, ioread16(ioaddr + EL3_STATUS)); +} + +static void +vortex_set_duplex(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + + pr_info("%s: setting %s-duplex.\n", + dev->name, (vp->full_duplex) ? "full" : "half"); + + /* Set the full-duplex bit. */ + window_write16(vp, + ((vp->info1 & 0x8000) || vp->full_duplex ? 0x20 : 0) | + (vp->large_frames ? 0x40 : 0) | + ((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ? + 0x100 : 0), + 3, Wn3_MAC_Ctrl); +} + +static void vortex_check_media(struct net_device *dev, unsigned int init) +{ + struct vortex_private *vp = netdev_priv(dev); + unsigned int ok_to_print = 0; + + if (vortex_debug > 3) + ok_to_print = 1; + + if (mii_check_media(&vp->mii, ok_to_print, init)) { + vp->full_duplex = vp->mii.full_duplex; + vortex_set_duplex(dev); + } else if (init) { + vortex_set_duplex(dev); + } +} + +static int +vortex_up(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + unsigned int config; + int i, mii_reg1, mii_reg5, err = 0; + + if (VORTEX_PCI(vp)) { + pci_set_power_state(VORTEX_PCI(vp), PCI_D0); /* Go active */ + if (vp->pm_state_valid) + pci_restore_state(VORTEX_PCI(vp)); + err = pci_enable_device(VORTEX_PCI(vp)); + if (err) { + pr_warning("%s: Could not enable device\n", + dev->name); + goto err_out; + } + } + + /* Before initializing select the active media port. */ + config = window_read32(vp, 3, Wn3_Config); + + if (vp->media_override != 7) { + pr_info("%s: Media override to transceiver %d (%s).\n", + dev->name, vp->media_override, + media_tbl[vp->media_override].name); + dev->if_port = vp->media_override; + } else if (vp->autoselect) { + if (vp->has_nway) { + if (vortex_debug > 1) + pr_info("%s: using NWAY device table, not %d\n", + dev->name, dev->if_port); + dev->if_port = XCVR_NWAY; + } else { + /* Find first available media type, starting with 100baseTx. */ + dev->if_port = XCVR_100baseTx; + while (! (vp->available_media & media_tbl[dev->if_port].mask)) + dev->if_port = media_tbl[dev->if_port].next; + if (vortex_debug > 1) + pr_info("%s: first available media type: %s\n", + dev->name, media_tbl[dev->if_port].name); + } + } else { + dev->if_port = vp->default_media; + if (vortex_debug > 1) + pr_info("%s: using default media %s\n", + dev->name, media_tbl[dev->if_port].name); + } + + init_timer(&vp->timer); + vp->timer.expires = RUN_AT(media_tbl[dev->if_port].wait); + vp->timer.data = (unsigned long)dev; + vp->timer.function = vortex_timer; /* timer handler */ + add_timer(&vp->timer); + + init_timer(&vp->rx_oom_timer); + vp->rx_oom_timer.data = (unsigned long)dev; + vp->rx_oom_timer.function = rx_oom_timer; + + if (vortex_debug > 1) + pr_debug("%s: Initial media type %s.\n", + dev->name, media_tbl[dev->if_port].name); + + vp->full_duplex = vp->mii.force_media; + config = BFINS(config, dev->if_port, 20, 4); + if (vortex_debug > 6) + pr_debug("vortex_up(): writing 0x%x to InternalConfig\n", config); + window_write32(vp, config, 3, Wn3_Config); + + if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) { + mii_reg1 = mdio_read(dev, vp->phys[0], MII_BMSR); + mii_reg5 = mdio_read(dev, vp->phys[0], MII_LPA); + vp->partner_flow_ctrl = ((mii_reg5 & 0x0400) != 0); + vp->mii.full_duplex = vp->full_duplex; + + vortex_check_media(dev, 1); + } + else + vortex_set_duplex(dev); + + issue_and_wait(dev, TxReset); + /* + * Don't reset the PHY - that upsets autonegotiation during DHCP operations. + */ + issue_and_wait(dev, RxReset|0x04); + + + iowrite16(SetStatusEnb | 0x00, ioaddr + EL3_CMD); + + if (vortex_debug > 1) { + pr_debug("%s: vortex_up() irq %d media status %4.4x.\n", + dev->name, dev->irq, window_read16(vp, 4, Wn4_Media)); + } + + /* Set the station address and mask in window 2 each time opened. */ + for (i = 0; i < 6; i++) + window_write8(vp, dev->dev_addr[i], 2, i); + for (; i < 12; i+=2) + window_write16(vp, 0, 2, i); + + if (vp->cb_fn_base) { + unsigned short n = window_read16(vp, 2, Wn2_ResetOptions) & ~0x4010; + if (vp->drv_flags & INVERT_LED_PWR) + n |= 0x10; + if (vp->drv_flags & INVERT_MII_PWR) + n |= 0x4000; + window_write16(vp, n, 2, Wn2_ResetOptions); + } + + if (dev->if_port == XCVR_10base2) + /* Start the thinnet transceiver. We should really wait 50ms...*/ + iowrite16(StartCoax, ioaddr + EL3_CMD); + if (dev->if_port != XCVR_NWAY) { + window_write16(vp, + (window_read16(vp, 4, Wn4_Media) & + ~(Media_10TP|Media_SQE)) | + media_tbl[dev->if_port].media_bits, + 4, Wn4_Media); + } + + /* Switch to the stats window, and clear all stats by reading. */ + iowrite16(StatsDisable, ioaddr + EL3_CMD); + for (i = 0; i < 10; i++) + window_read8(vp, 6, i); + window_read16(vp, 6, 10); + window_read16(vp, 6, 12); + /* New: On the Vortex we must also clear the BadSSD counter. */ + window_read8(vp, 4, 12); + /* ..and on the Boomerang we enable the extra statistics bits. */ + window_write16(vp, 0x0040, 4, Wn4_NetDiag); + + if (vp->full_bus_master_rx) { /* Boomerang bus master. */ + vp->cur_rx = vp->dirty_rx = 0; + /* Initialize the RxEarly register as recommended. */ + iowrite16(SetRxThreshold + (1536>>2), ioaddr + EL3_CMD); + iowrite32(0x0020, ioaddr + PktStatus); + iowrite32(vp->rx_ring_dma, ioaddr + UpListPtr); + } + if (vp->full_bus_master_tx) { /* Boomerang bus master Tx. */ + vp->cur_tx = vp->dirty_tx = 0; + if (vp->drv_flags & IS_BOOMERANG) + iowrite8(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold); /* Room for a packet. */ + /* Clear the Rx, Tx rings. */ + for (i = 0; i < RX_RING_SIZE; i++) /* AKPM: this is done in vortex_open, too */ + vp->rx_ring[i].status = 0; + for (i = 0; i < TX_RING_SIZE; i++) + vp->tx_skbuff[i] = NULL; + iowrite32(0, ioaddr + DownListPtr); + } + /* Set receiver mode: presumably accept b-case and phys addr only. */ + set_rx_mode(dev); + /* enable 802.1q tagged frames */ + set_8021q_mode(dev, 1); + iowrite16(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */ + + iowrite16(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */ + iowrite16(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */ + /* Allow status bits to be seen. */ + vp->status_enable = SetStatusEnb | HostError|IntReq|StatsFull|TxComplete| + (vp->full_bus_master_tx ? DownComplete : TxAvailable) | + (vp->full_bus_master_rx ? UpComplete : RxComplete) | + (vp->bus_master ? DMADone : 0); + vp->intr_enable = SetIntrEnb | IntLatch | TxAvailable | + (vp->full_bus_master_rx ? 0 : RxComplete) | + StatsFull | HostError | TxComplete | IntReq + | (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete; + iowrite16(vp->status_enable, ioaddr + EL3_CMD); + /* Ack all pending events, and set active indicator mask. */ + iowrite16(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq, + ioaddr + EL3_CMD); + iowrite16(vp->intr_enable, ioaddr + EL3_CMD); + if (vp->cb_fn_base) /* The PCMCIA people are idiots. */ + iowrite32(0x8000, vp->cb_fn_base + 4); + netif_start_queue (dev); +err_out: + return err; +} + +static int +vortex_open(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + int i; + int retval; + + /* Use the now-standard shared IRQ implementation. */ + if ((retval = request_irq(dev->irq, vp->full_bus_master_rx ? + boomerang_interrupt : vortex_interrupt, IRQF_SHARED, dev->name, dev))) { + pr_err("%s: Could not reserve IRQ %d\n", dev->name, dev->irq); + goto err; + } + + if (vp->full_bus_master_rx) { /* Boomerang bus master. */ + if (vortex_debug > 2) + pr_debug("%s: Filling in the Rx ring.\n", dev->name); + for (i = 0; i < RX_RING_SIZE; i++) { + struct sk_buff *skb; + vp->rx_ring[i].next = cpu_to_le32(vp->rx_ring_dma + sizeof(struct boom_rx_desc) * (i+1)); + vp->rx_ring[i].status = 0; /* Clear complete bit. */ + vp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ | LAST_FRAG); + + skb = __netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN, + GFP_KERNEL); + vp->rx_skbuff[i] = skb; + if (skb == NULL) + break; /* Bad news! */ + + skb_reserve(skb, NET_IP_ALIGN); /* Align IP on 16 byte boundaries */ + vp->rx_ring[i].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE)); + } + if (i != RX_RING_SIZE) { + int j; + pr_emerg("%s: no memory for rx ring\n", dev->name); + for (j = 0; j < i; j++) { + if (vp->rx_skbuff[j]) { + dev_kfree_skb(vp->rx_skbuff[j]); + vp->rx_skbuff[j] = NULL; + } + } + retval = -ENOMEM; + goto err_free_irq; + } + /* Wrap the ring. */ + vp->rx_ring[i-1].next = cpu_to_le32(vp->rx_ring_dma); + } + + retval = vortex_up(dev); + if (!retval) + goto out; + +err_free_irq: + free_irq(dev->irq, dev); +err: + if (vortex_debug > 1) + pr_err("%s: vortex_open() fails: returning %d\n", dev->name, retval); +out: + return retval; +} + +static void +vortex_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + int next_tick = 60*HZ; + int ok = 0; + int media_status; + + if (vortex_debug > 2) { + pr_debug("%s: Media selection timer tick happened, %s.\n", + dev->name, media_tbl[dev->if_port].name); + pr_debug("dev->watchdog_timeo=%d\n", dev->watchdog_timeo); + } + + media_status = window_read16(vp, 4, Wn4_Media); + switch (dev->if_port) { + case XCVR_10baseT: case XCVR_100baseTx: case XCVR_100baseFx: + if (media_status & Media_LnkBeat) { + netif_carrier_on(dev); + ok = 1; + if (vortex_debug > 1) + pr_debug("%s: Media %s has link beat, %x.\n", + dev->name, media_tbl[dev->if_port].name, media_status); + } else { + netif_carrier_off(dev); + if (vortex_debug > 1) { + pr_debug("%s: Media %s has no link beat, %x.\n", + dev->name, media_tbl[dev->if_port].name, media_status); + } + } + break; + case XCVR_MII: case XCVR_NWAY: + { + ok = 1; + vortex_check_media(dev, 0); + } + break; + default: /* Other media types handled by Tx timeouts. */ + if (vortex_debug > 1) + pr_debug("%s: Media %s has no indication, %x.\n", + dev->name, media_tbl[dev->if_port].name, media_status); + ok = 1; + } + + if (!netif_carrier_ok(dev)) + next_tick = 5*HZ; + + if (vp->medialock) + goto leave_media_alone; + + if (!ok) { + unsigned int config; + + spin_lock_irq(&vp->lock); + + do { + dev->if_port = media_tbl[dev->if_port].next; + } while ( ! (vp->available_media & media_tbl[dev->if_port].mask)); + if (dev->if_port == XCVR_Default) { /* Go back to default. */ + dev->if_port = vp->default_media; + if (vortex_debug > 1) + pr_debug("%s: Media selection failing, using default %s port.\n", + dev->name, media_tbl[dev->if_port].name); + } else { + if (vortex_debug > 1) + pr_debug("%s: Media selection failed, now trying %s port.\n", + dev->name, media_tbl[dev->if_port].name); + next_tick = media_tbl[dev->if_port].wait; + } + window_write16(vp, + (media_status & ~(Media_10TP|Media_SQE)) | + media_tbl[dev->if_port].media_bits, + 4, Wn4_Media); + + config = window_read32(vp, 3, Wn3_Config); + config = BFINS(config, dev->if_port, 20, 4); + window_write32(vp, config, 3, Wn3_Config); + + iowrite16(dev->if_port == XCVR_10base2 ? StartCoax : StopCoax, + ioaddr + EL3_CMD); + if (vortex_debug > 1) + pr_debug("wrote 0x%08x to Wn3_Config\n", config); + /* AKPM: FIXME: Should reset Rx & Tx here. P60 of 3c90xc.pdf */ + + spin_unlock_irq(&vp->lock); + } + +leave_media_alone: + if (vortex_debug > 2) + pr_debug("%s: Media selection timer finished, %s.\n", + dev->name, media_tbl[dev->if_port].name); + + mod_timer(&vp->timer, RUN_AT(next_tick)); + if (vp->deferred) + iowrite16(FakeIntr, ioaddr + EL3_CMD); +} + +static void vortex_tx_timeout(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + + pr_err("%s: transmit timed out, tx_status %2.2x status %4.4x.\n", + dev->name, ioread8(ioaddr + TxStatus), + ioread16(ioaddr + EL3_STATUS)); + pr_err(" diagnostics: net %04x media %04x dma %08x fifo %04x\n", + window_read16(vp, 4, Wn4_NetDiag), + window_read16(vp, 4, Wn4_Media), + ioread32(ioaddr + PktStatus), + window_read16(vp, 4, Wn4_FIFODiag)); + /* Slight code bloat to be user friendly. */ + if ((ioread8(ioaddr + TxStatus) & 0x88) == 0x88) + pr_err("%s: Transmitter encountered 16 collisions --" + " network cable problem?\n", dev->name); + if (ioread16(ioaddr + EL3_STATUS) & IntLatch) { + pr_err("%s: Interrupt posted but not delivered --" + " IRQ blocked by another device?\n", dev->name); + /* Bad idea here.. but we might as well handle a few events. */ + { + /* + * Block interrupts because vortex_interrupt does a bare spin_lock() + */ + unsigned long flags; + local_irq_save(flags); + if (vp->full_bus_master_tx) + boomerang_interrupt(dev->irq, dev); + else + vortex_interrupt(dev->irq, dev); + local_irq_restore(flags); + } + } + + if (vortex_debug > 0) + dump_tx_ring(dev); + + issue_and_wait(dev, TxReset); + + dev->stats.tx_errors++; + if (vp->full_bus_master_tx) { + pr_debug("%s: Resetting the Tx ring pointer.\n", dev->name); + if (vp->cur_tx - vp->dirty_tx > 0 && ioread32(ioaddr + DownListPtr) == 0) + iowrite32(vp->tx_ring_dma + (vp->dirty_tx % TX_RING_SIZE) * sizeof(struct boom_tx_desc), + ioaddr + DownListPtr); + if (vp->cur_tx - vp->dirty_tx < TX_RING_SIZE) + netif_wake_queue (dev); + if (vp->drv_flags & IS_BOOMERANG) + iowrite8(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold); + iowrite16(DownUnstall, ioaddr + EL3_CMD); + } else { + dev->stats.tx_dropped++; + netif_wake_queue(dev); + } + + /* Issue Tx Enable */ + iowrite16(TxEnable, ioaddr + EL3_CMD); + dev->trans_start = jiffies; /* prevent tx timeout */ +} + +/* + * Handle uncommon interrupt sources. This is a separate routine to minimize + * the cache impact. + */ +static void +vortex_error(struct net_device *dev, int status) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + int do_tx_reset = 0, reset_mask = 0; + unsigned char tx_status = 0; + + if (vortex_debug > 2) { + pr_err("%s: vortex_error(), status=0x%x\n", dev->name, status); + } + + if (status & TxComplete) { /* Really "TxError" for us. */ + tx_status = ioread8(ioaddr + TxStatus); + /* Presumably a tx-timeout. We must merely re-enable. */ + if (vortex_debug > 2 || + (tx_status != 0x88 && vortex_debug > 0)) { + pr_err("%s: Transmit error, Tx status register %2.2x.\n", + dev->name, tx_status); + if (tx_status == 0x82) { + pr_err("Probably a duplex mismatch. See " + "Documentation/networking/vortex.txt\n"); + } + dump_tx_ring(dev); + } + if (tx_status & 0x14) dev->stats.tx_fifo_errors++; + if (tx_status & 0x38) dev->stats.tx_aborted_errors++; + if (tx_status & 0x08) vp->xstats.tx_max_collisions++; + iowrite8(0, ioaddr + TxStatus); + if (tx_status & 0x30) { /* txJabber or txUnderrun */ + do_tx_reset = 1; + } else if ((tx_status & 0x08) && (vp->drv_flags & MAX_COLLISION_RESET)) { /* maxCollisions */ + do_tx_reset = 1; + reset_mask = 0x0108; /* Reset interface logic, but not download logic */ + } else { /* Merely re-enable the transmitter. */ + iowrite16(TxEnable, ioaddr + EL3_CMD); + } + } + + if (status & RxEarly) /* Rx early is unused. */ + iowrite16(AckIntr | RxEarly, ioaddr + EL3_CMD); + + if (status & StatsFull) { /* Empty statistics. */ + static int DoneDidThat; + if (vortex_debug > 4) + pr_debug("%s: Updating stats.\n", dev->name); + update_stats(ioaddr, dev); + /* HACK: Disable statistics as an interrupt source. */ + /* This occurs when we have the wrong media type! */ + if (DoneDidThat == 0 && + ioread16(ioaddr + EL3_STATUS) & StatsFull) { + pr_warning("%s: Updating statistics failed, disabling " + "stats as an interrupt source.\n", dev->name); + iowrite16(SetIntrEnb | + (window_read16(vp, 5, 10) & ~StatsFull), + ioaddr + EL3_CMD); + vp->intr_enable &= ~StatsFull; + DoneDidThat++; + } + } + if (status & IntReq) { /* Restore all interrupt sources. */ + iowrite16(vp->status_enable, ioaddr + EL3_CMD); + iowrite16(vp->intr_enable, ioaddr + EL3_CMD); + } + if (status & HostError) { + u16 fifo_diag; + fifo_diag = window_read16(vp, 4, Wn4_FIFODiag); + pr_err("%s: Host error, FIFO diagnostic register %4.4x.\n", + dev->name, fifo_diag); + /* Adapter failure requires Tx/Rx reset and reinit. */ + if (vp->full_bus_master_tx) { + int bus_status = ioread32(ioaddr + PktStatus); + /* 0x80000000 PCI master abort. */ + /* 0x40000000 PCI target abort. */ + if (vortex_debug) + pr_err("%s: PCI bus error, bus status %8.8x\n", dev->name, bus_status); + + /* In this case, blow the card away */ + /* Must not enter D3 or we can't legally issue the reset! */ + vortex_down(dev, 0); + issue_and_wait(dev, TotalReset | 0xff); + vortex_up(dev); /* AKPM: bug. vortex_up() assumes that the rx ring is full. It may not be. */ + } else if (fifo_diag & 0x0400) + do_tx_reset = 1; + if (fifo_diag & 0x3000) { + /* Reset Rx fifo and upload logic */ + issue_and_wait(dev, RxReset|0x07); + /* Set the Rx filter to the current state. */ + set_rx_mode(dev); + /* enable 802.1q VLAN tagged frames */ + set_8021q_mode(dev, 1); + iowrite16(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */ + iowrite16(AckIntr | HostError, ioaddr + EL3_CMD); + } + } + + if (do_tx_reset) { + issue_and_wait(dev, TxReset|reset_mask); + iowrite16(TxEnable, ioaddr + EL3_CMD); + if (!vp->full_bus_master_tx) + netif_wake_queue(dev); + } +} + +static netdev_tx_t +vortex_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + + /* Put out the doubleword header... */ + iowrite32(skb->len, ioaddr + TX_FIFO); + if (vp->bus_master) { + /* Set the bus-master controller to transfer the packet. */ + int len = (skb->len + 3) & ~3; + vp->tx_skb_dma = pci_map_single(VORTEX_PCI(vp), skb->data, len, + PCI_DMA_TODEVICE); + spin_lock_irq(&vp->window_lock); + window_set(vp, 7); + iowrite32(vp->tx_skb_dma, ioaddr + Wn7_MasterAddr); + iowrite16(len, ioaddr + Wn7_MasterLen); + spin_unlock_irq(&vp->window_lock); + vp->tx_skb = skb; + iowrite16(StartDMADown, ioaddr + EL3_CMD); + /* netif_wake_queue() will be called at the DMADone interrupt. */ + } else { + /* ... and the packet rounded to a doubleword. */ + iowrite32_rep(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2); + dev_kfree_skb (skb); + if (ioread16(ioaddr + TxFree) > 1536) { + netif_start_queue (dev); /* AKPM: redundant? */ + } else { + /* Interrupt us when the FIFO has room for max-sized packet. */ + netif_stop_queue(dev); + iowrite16(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD); + } + } + + + /* Clear the Tx status stack. */ + { + int tx_status; + int i = 32; + + while (--i > 0 && (tx_status = ioread8(ioaddr + TxStatus)) > 0) { + if (tx_status & 0x3C) { /* A Tx-disabling error occurred. */ + if (vortex_debug > 2) + pr_debug("%s: Tx error, status %2.2x.\n", + dev->name, tx_status); + if (tx_status & 0x04) dev->stats.tx_fifo_errors++; + if (tx_status & 0x38) dev->stats.tx_aborted_errors++; + if (tx_status & 0x30) { + issue_and_wait(dev, TxReset); + } + iowrite16(TxEnable, ioaddr + EL3_CMD); + } + iowrite8(0x00, ioaddr + TxStatus); /* Pop the status stack. */ + } + } + return NETDEV_TX_OK; +} + +static netdev_tx_t +boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + /* Calculate the next Tx descriptor entry. */ + int entry = vp->cur_tx % TX_RING_SIZE; + struct boom_tx_desc *prev_entry = &vp->tx_ring[(vp->cur_tx-1) % TX_RING_SIZE]; + unsigned long flags; + + if (vortex_debug > 6) { + pr_debug("boomerang_start_xmit()\n"); + pr_debug("%s: Trying to send a packet, Tx index %d.\n", + dev->name, vp->cur_tx); + } + + /* + * We can't allow a recursion from our interrupt handler back into the + * tx routine, as they take the same spin lock, and that causes + * deadlock. Just return NETDEV_TX_BUSY and let the stack try again in + * a bit + */ + if (vp->handling_irq) + return NETDEV_TX_BUSY; + + if (vp->cur_tx - vp->dirty_tx >= TX_RING_SIZE) { + if (vortex_debug > 0) + pr_warning("%s: BUG! Tx Ring full, refusing to send buffer.\n", + dev->name); + netif_stop_queue(dev); + return NETDEV_TX_BUSY; + } + + vp->tx_skbuff[entry] = skb; + + vp->tx_ring[entry].next = 0; +#if DO_ZEROCOPY + if (skb->ip_summed != CHECKSUM_PARTIAL) + vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded); + else + vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded | AddTCPChksum | AddUDPChksum); + + if (!skb_shinfo(skb)->nr_frags) { + vp->tx_ring[entry].frag[0].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, + skb->len, PCI_DMA_TODEVICE)); + vp->tx_ring[entry].frag[0].length = cpu_to_le32(skb->len | LAST_FRAG); + } else { + int i; + + vp->tx_ring[entry].frag[0].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, + skb_headlen(skb), PCI_DMA_TODEVICE)); + vp->tx_ring[entry].frag[0].length = cpu_to_le32(skb_headlen(skb)); + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + vp->tx_ring[entry].frag[i+1].addr = + cpu_to_le32(pci_map_single(VORTEX_PCI(vp), + (void*)page_address(frag->page) + frag->page_offset, + frag->size, PCI_DMA_TODEVICE)); + + if (i == skb_shinfo(skb)->nr_frags-1) + vp->tx_ring[entry].frag[i+1].length = cpu_to_le32(frag->size|LAST_FRAG); + else + vp->tx_ring[entry].frag[i+1].length = cpu_to_le32(frag->size); + } + } +#else + vp->tx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, skb->len, PCI_DMA_TODEVICE)); + vp->tx_ring[entry].length = cpu_to_le32(skb->len | LAST_FRAG); + vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded); +#endif + + spin_lock_irqsave(&vp->lock, flags); + /* Wait for the stall to complete. */ + issue_and_wait(dev, DownStall); + prev_entry->next = cpu_to_le32(vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc)); + if (ioread32(ioaddr + DownListPtr) == 0) { + iowrite32(vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc), ioaddr + DownListPtr); + vp->queued_packet++; + } + + vp->cur_tx++; + if (vp->cur_tx - vp->dirty_tx > TX_RING_SIZE - 1) { + netif_stop_queue (dev); + } else { /* Clear previous interrupt enable. */ +#if defined(tx_interrupt_mitigation) + /* Dubious. If in boomeang_interrupt "faster" cyclone ifdef + * were selected, this would corrupt DN_COMPLETE. No? + */ + prev_entry->status &= cpu_to_le32(~TxIntrUploaded); +#endif + } + iowrite16(DownUnstall, ioaddr + EL3_CMD); + spin_unlock_irqrestore(&vp->lock, flags); + return NETDEV_TX_OK; +} + +/* The interrupt handler does all of the Rx thread work and cleans up + after the Tx thread. */ + +/* + * This is the ISR for the vortex series chips. + * full_bus_master_tx == 0 && full_bus_master_rx == 0 + */ + +static irqreturn_t +vortex_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr; + int status; + int work_done = max_interrupt_work; + int handled = 0; + + ioaddr = vp->ioaddr; + spin_lock(&vp->lock); + + status = ioread16(ioaddr + EL3_STATUS); + + if (vortex_debug > 6) + pr_debug("vortex_interrupt(). status=0x%4x\n", status); + + if ((status & IntLatch) == 0) + goto handler_exit; /* No interrupt: shared IRQs cause this */ + handled = 1; + + if (status & IntReq) { + status |= vp->deferred; + vp->deferred = 0; + } + + if (status == 0xffff) /* h/w no longer present (hotplug)? */ + goto handler_exit; + + if (vortex_debug > 4) + pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n", + dev->name, status, ioread8(ioaddr + Timer)); + + spin_lock(&vp->window_lock); + window_set(vp, 7); + + do { + if (vortex_debug > 5) + pr_debug("%s: In interrupt loop, status %4.4x.\n", + dev->name, status); + if (status & RxComplete) + vortex_rx(dev); + + if (status & TxAvailable) { + if (vortex_debug > 5) + pr_debug(" TX room bit was handled.\n"); + /* There's room in the FIFO for a full-sized packet. */ + iowrite16(AckIntr | TxAvailable, ioaddr + EL3_CMD); + netif_wake_queue (dev); + } + + if (status & DMADone) { + if (ioread16(ioaddr + Wn7_MasterStatus) & 0x1000) { + iowrite16(0x1000, ioaddr + Wn7_MasterStatus); /* Ack the event. */ + pci_unmap_single(VORTEX_PCI(vp), vp->tx_skb_dma, (vp->tx_skb->len + 3) & ~3, PCI_DMA_TODEVICE); + dev_kfree_skb_irq(vp->tx_skb); /* Release the transferred buffer */ + if (ioread16(ioaddr + TxFree) > 1536) { + /* + * AKPM: FIXME: I don't think we need this. If the queue was stopped due to + * insufficient FIFO room, the TxAvailable test will succeed and call + * netif_wake_queue() + */ + netif_wake_queue(dev); + } else { /* Interrupt when FIFO has room for max-sized packet. */ + iowrite16(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD); + netif_stop_queue(dev); + } + } + } + /* Check for all uncommon interrupts at once. */ + if (status & (HostError | RxEarly | StatsFull | TxComplete | IntReq)) { + if (status == 0xffff) + break; + if (status & RxEarly) + vortex_rx(dev); + spin_unlock(&vp->window_lock); + vortex_error(dev, status); + spin_lock(&vp->window_lock); + window_set(vp, 7); + } + + if (--work_done < 0) { + pr_warning("%s: Too much work in interrupt, status %4.4x.\n", + dev->name, status); + /* Disable all pending interrupts. */ + do { + vp->deferred |= status; + iowrite16(SetStatusEnb | (~vp->deferred & vp->status_enable), + ioaddr + EL3_CMD); + iowrite16(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD); + } while ((status = ioread16(ioaddr + EL3_CMD)) & IntLatch); + /* The timer will reenable interrupts. */ + mod_timer(&vp->timer, jiffies + 1*HZ); + break; + } + /* Acknowledge the IRQ. */ + iowrite16(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); + } while ((status = ioread16(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete)); + + spin_unlock(&vp->window_lock); + + if (vortex_debug > 4) + pr_debug("%s: exiting interrupt, status %4.4x.\n", + dev->name, status); +handler_exit: + spin_unlock(&vp->lock); + return IRQ_RETVAL(handled); +} + +/* + * This is the ISR for the boomerang series chips. + * full_bus_master_tx == 1 && full_bus_master_rx == 1 + */ + +static irqreturn_t +boomerang_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr; + int status; + int work_done = max_interrupt_work; + + ioaddr = vp->ioaddr; + + + /* + * It seems dopey to put the spinlock this early, but we could race against vortex_tx_timeout + * and boomerang_start_xmit + */ + spin_lock(&vp->lock); + vp->handling_irq = 1; + + status = ioread16(ioaddr + EL3_STATUS); + + if (vortex_debug > 6) + pr_debug("boomerang_interrupt. status=0x%4x\n", status); + + if ((status & IntLatch) == 0) + goto handler_exit; /* No interrupt: shared IRQs can cause this */ + + if (status == 0xffff) { /* h/w no longer present (hotplug)? */ + if (vortex_debug > 1) + pr_debug("boomerang_interrupt(1): status = 0xffff\n"); + goto handler_exit; + } + + if (status & IntReq) { + status |= vp->deferred; + vp->deferred = 0; + } + + if (vortex_debug > 4) + pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n", + dev->name, status, ioread8(ioaddr + Timer)); + do { + if (vortex_debug > 5) + pr_debug("%s: In interrupt loop, status %4.4x.\n", + dev->name, status); + if (status & UpComplete) { + iowrite16(AckIntr | UpComplete, ioaddr + EL3_CMD); + if (vortex_debug > 5) + pr_debug("boomerang_interrupt->boomerang_rx\n"); + boomerang_rx(dev); + } + + if (status & DownComplete) { + unsigned int dirty_tx = vp->dirty_tx; + + iowrite16(AckIntr | DownComplete, ioaddr + EL3_CMD); + while (vp->cur_tx - dirty_tx > 0) { + int entry = dirty_tx % TX_RING_SIZE; +#if 1 /* AKPM: the latter is faster, but cyclone-only */ + if (ioread32(ioaddr + DownListPtr) == + vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc)) + break; /* It still hasn't been processed. */ +#else + if ((vp->tx_ring[entry].status & DN_COMPLETE) == 0) + break; /* It still hasn't been processed. */ +#endif + + if (vp->tx_skbuff[entry]) { + struct sk_buff *skb = vp->tx_skbuff[entry]; +#if DO_ZEROCOPY + int i; + for (i=0; i<=skb_shinfo(skb)->nr_frags; i++) + pci_unmap_single(VORTEX_PCI(vp), + le32_to_cpu(vp->tx_ring[entry].frag[i].addr), + le32_to_cpu(vp->tx_ring[entry].frag[i].length)&0xFFF, + PCI_DMA_TODEVICE); +#else + pci_unmap_single(VORTEX_PCI(vp), + le32_to_cpu(vp->tx_ring[entry].addr), skb->len, PCI_DMA_TODEVICE); +#endif + dev_kfree_skb_irq(skb); + vp->tx_skbuff[entry] = NULL; + } else { + pr_debug("boomerang_interrupt: no skb!\n"); + } + /* dev->stats.tx_packets++; Counted below. */ + dirty_tx++; + } + vp->dirty_tx = dirty_tx; + if (vp->cur_tx - dirty_tx <= TX_RING_SIZE - 1) { + if (vortex_debug > 6) + pr_debug("boomerang_interrupt: wake queue\n"); + netif_wake_queue (dev); + } + } + + /* Check for all uncommon interrupts at once. */ + if (status & (HostError | RxEarly | StatsFull | TxComplete | IntReq)) + vortex_error(dev, status); + + if (--work_done < 0) { + pr_warning("%s: Too much work in interrupt, status %4.4x.\n", + dev->name, status); + /* Disable all pending interrupts. */ + do { + vp->deferred |= status; + iowrite16(SetStatusEnb | (~vp->deferred & vp->status_enable), + ioaddr + EL3_CMD); + iowrite16(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD); + } while ((status = ioread16(ioaddr + EL3_CMD)) & IntLatch); + /* The timer will reenable interrupts. */ + mod_timer(&vp->timer, jiffies + 1*HZ); + break; + } + /* Acknowledge the IRQ. */ + iowrite16(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); + if (vp->cb_fn_base) /* The PCMCIA people are idiots. */ + iowrite32(0x8000, vp->cb_fn_base + 4); + + } while ((status = ioread16(ioaddr + EL3_STATUS)) & IntLatch); + + if (vortex_debug > 4) + pr_debug("%s: exiting interrupt, status %4.4x.\n", + dev->name, status); +handler_exit: + vp->handling_irq = 0; + spin_unlock(&vp->lock); + return IRQ_HANDLED; +} + +static int vortex_rx(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + int i; + short rx_status; + + if (vortex_debug > 5) + pr_debug("vortex_rx(): status %4.4x, rx_status %4.4x.\n", + ioread16(ioaddr+EL3_STATUS), ioread16(ioaddr+RxStatus)); + while ((rx_status = ioread16(ioaddr + RxStatus)) > 0) { + if (rx_status & 0x4000) { /* Error, update stats. */ + unsigned char rx_error = ioread8(ioaddr + RxErrors); + if (vortex_debug > 2) + pr_debug(" Rx error: status %2.2x.\n", rx_error); + dev->stats.rx_errors++; + if (rx_error & 0x01) dev->stats.rx_over_errors++; + if (rx_error & 0x02) dev->stats.rx_length_errors++; + if (rx_error & 0x04) dev->stats.rx_frame_errors++; + if (rx_error & 0x08) dev->stats.rx_crc_errors++; + if (rx_error & 0x10) dev->stats.rx_length_errors++; + } else { + /* The packet length: up to 4.5K!. */ + int pkt_len = rx_status & 0x1fff; + struct sk_buff *skb; + + skb = dev_alloc_skb(pkt_len + 5); + if (vortex_debug > 4) + pr_debug("Receiving packet size %d status %4.4x.\n", + pkt_len, rx_status); + if (skb != NULL) { + skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ + /* 'skb_put()' points to the start of sk_buff data area. */ + if (vp->bus_master && + ! (ioread16(ioaddr + Wn7_MasterStatus) & 0x8000)) { + dma_addr_t dma = pci_map_single(VORTEX_PCI(vp), skb_put(skb, pkt_len), + pkt_len, PCI_DMA_FROMDEVICE); + iowrite32(dma, ioaddr + Wn7_MasterAddr); + iowrite16((skb->len + 3) & ~3, ioaddr + Wn7_MasterLen); + iowrite16(StartDMAUp, ioaddr + EL3_CMD); + while (ioread16(ioaddr + Wn7_MasterStatus) & 0x8000) + ; + pci_unmap_single(VORTEX_PCI(vp), dma, pkt_len, PCI_DMA_FROMDEVICE); + } else { + ioread32_rep(ioaddr + RX_FIFO, + skb_put(skb, pkt_len), + (pkt_len + 3) >> 2); + } + iowrite16(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */ + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->stats.rx_packets++; + /* Wait a limited time to go to next packet. */ + for (i = 200; i >= 0; i--) + if ( ! (ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) + break; + continue; + } else if (vortex_debug > 0) + pr_notice("%s: No memory to allocate a sk_buff of size %d.\n", + dev->name, pkt_len); + dev->stats.rx_dropped++; + } + issue_and_wait(dev, RxDiscard); + } + + return 0; +} + +static int +boomerang_rx(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + int entry = vp->cur_rx % RX_RING_SIZE; + void __iomem *ioaddr = vp->ioaddr; + int rx_status; + int rx_work_limit = vp->dirty_rx + RX_RING_SIZE - vp->cur_rx; + + if (vortex_debug > 5) + pr_debug("boomerang_rx(): status %4.4x\n", ioread16(ioaddr+EL3_STATUS)); + + while ((rx_status = le32_to_cpu(vp->rx_ring[entry].status)) & RxDComplete){ + if (--rx_work_limit < 0) + break; + if (rx_status & RxDError) { /* Error, update stats. */ + unsigned char rx_error = rx_status >> 16; + if (vortex_debug > 2) + pr_debug(" Rx error: status %2.2x.\n", rx_error); + dev->stats.rx_errors++; + if (rx_error & 0x01) dev->stats.rx_over_errors++; + if (rx_error & 0x02) dev->stats.rx_length_errors++; + if (rx_error & 0x04) dev->stats.rx_frame_errors++; + if (rx_error & 0x08) dev->stats.rx_crc_errors++; + if (rx_error & 0x10) dev->stats.rx_length_errors++; + } else { + /* The packet length: up to 4.5K!. */ + int pkt_len = rx_status & 0x1fff; + struct sk_buff *skb; + dma_addr_t dma = le32_to_cpu(vp->rx_ring[entry].addr); + + if (vortex_debug > 4) + pr_debug("Receiving packet size %d status %4.4x.\n", + pkt_len, rx_status); + + /* Check if the packet is long enough to just accept without + copying to a properly sized skbuff. */ + if (pkt_len < rx_copybreak && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { + skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ + pci_dma_sync_single_for_cpu(VORTEX_PCI(vp), dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE); + /* 'skb_put()' points to the start of sk_buff data area. */ + memcpy(skb_put(skb, pkt_len), + vp->rx_skbuff[entry]->data, + pkt_len); + pci_dma_sync_single_for_device(VORTEX_PCI(vp), dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE); + vp->rx_copy++; + } else { + /* Pass up the skbuff already on the Rx ring. */ + skb = vp->rx_skbuff[entry]; + vp->rx_skbuff[entry] = NULL; + skb_put(skb, pkt_len); + pci_unmap_single(VORTEX_PCI(vp), dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE); + vp->rx_nocopy++; + } + skb->protocol = eth_type_trans(skb, dev); + { /* Use hardware checksum info. */ + int csum_bits = rx_status & 0xee000000; + if (csum_bits && + (csum_bits == (IPChksumValid | TCPChksumValid) || + csum_bits == (IPChksumValid | UDPChksumValid))) { + skb->ip_summed = CHECKSUM_UNNECESSARY; + vp->rx_csumhits++; + } + } + netif_rx(skb); + dev->stats.rx_packets++; + } + entry = (++vp->cur_rx) % RX_RING_SIZE; + } + /* Refill the Rx ring buffers. */ + for (; vp->cur_rx - vp->dirty_rx > 0; vp->dirty_rx++) { + struct sk_buff *skb; + entry = vp->dirty_rx % RX_RING_SIZE; + if (vp->rx_skbuff[entry] == NULL) { + skb = netdev_alloc_skb_ip_align(dev, PKT_BUF_SZ); + if (skb == NULL) { + static unsigned long last_jif; + if (time_after(jiffies, last_jif + 10 * HZ)) { + pr_warning("%s: memory shortage\n", dev->name); + last_jif = jiffies; + } + if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE) + mod_timer(&vp->rx_oom_timer, RUN_AT(HZ * 1)); + break; /* Bad news! */ + } + + vp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE)); + vp->rx_skbuff[entry] = skb; + } + vp->rx_ring[entry].status = 0; /* Clear complete bit. */ + iowrite16(UpUnstall, ioaddr + EL3_CMD); + } + return 0; +} + +/* + * If we've hit a total OOM refilling the Rx ring we poll once a second + * for some memory. Otherwise there is no way to restart the rx process. + */ +static void +rx_oom_timer(unsigned long arg) +{ + struct net_device *dev = (struct net_device *)arg; + struct vortex_private *vp = netdev_priv(dev); + + spin_lock_irq(&vp->lock); + if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE) /* This test is redundant, but makes me feel good */ + boomerang_rx(dev); + if (vortex_debug > 1) { + pr_debug("%s: rx_oom_timer %s\n", dev->name, + ((vp->cur_rx - vp->dirty_rx) != RX_RING_SIZE) ? "succeeded" : "retrying"); + } + spin_unlock_irq(&vp->lock); +} + +static void +vortex_down(struct net_device *dev, int final_down) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + + netif_stop_queue (dev); + + del_timer_sync(&vp->rx_oom_timer); + del_timer_sync(&vp->timer); + + /* Turn off statistics ASAP. We update dev->stats below. */ + iowrite16(StatsDisable, ioaddr + EL3_CMD); + + /* Disable the receiver and transmitter. */ + iowrite16(RxDisable, ioaddr + EL3_CMD); + iowrite16(TxDisable, ioaddr + EL3_CMD); + + /* Disable receiving 802.1q tagged frames */ + set_8021q_mode(dev, 0); + + if (dev->if_port == XCVR_10base2) + /* Turn off thinnet power. Green! */ + iowrite16(StopCoax, ioaddr + EL3_CMD); + + iowrite16(SetIntrEnb | 0x0000, ioaddr + EL3_CMD); + + update_stats(ioaddr, dev); + if (vp->full_bus_master_rx) + iowrite32(0, ioaddr + UpListPtr); + if (vp->full_bus_master_tx) + iowrite32(0, ioaddr + DownListPtr); + + if (final_down && VORTEX_PCI(vp)) { + vp->pm_state_valid = 1; + pci_save_state(VORTEX_PCI(vp)); + acpi_set_WOL(dev); + } +} + +static int +vortex_close(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + int i; + + if (netif_device_present(dev)) + vortex_down(dev, 1); + + if (vortex_debug > 1) { + pr_debug("%s: vortex_close() status %4.4x, Tx status %2.2x.\n", + dev->name, ioread16(ioaddr + EL3_STATUS), ioread8(ioaddr + TxStatus)); + pr_debug("%s: vortex close stats: rx_nocopy %d rx_copy %d" + " tx_queued %d Rx pre-checksummed %d.\n", + dev->name, vp->rx_nocopy, vp->rx_copy, vp->queued_packet, vp->rx_csumhits); + } + +#if DO_ZEROCOPY + if (vp->rx_csumhits && + (vp->drv_flags & HAS_HWCKSM) == 0 && + (vp->card_idx >= MAX_UNITS || hw_checksums[vp->card_idx] == -1)) { + pr_warning("%s supports hardware checksums, and we're not using them!\n", dev->name); + } +#endif + + free_irq(dev->irq, dev); + + if (vp->full_bus_master_rx) { /* Free Boomerang bus master Rx buffers. */ + for (i = 0; i < RX_RING_SIZE; i++) + if (vp->rx_skbuff[i]) { + pci_unmap_single( VORTEX_PCI(vp), le32_to_cpu(vp->rx_ring[i].addr), + PKT_BUF_SZ, PCI_DMA_FROMDEVICE); + dev_kfree_skb(vp->rx_skbuff[i]); + vp->rx_skbuff[i] = NULL; + } + } + if (vp->full_bus_master_tx) { /* Free Boomerang bus master Tx buffers. */ + for (i = 0; i < TX_RING_SIZE; i++) { + if (vp->tx_skbuff[i]) { + struct sk_buff *skb = vp->tx_skbuff[i]; +#if DO_ZEROCOPY + int k; + + for (k=0; k<=skb_shinfo(skb)->nr_frags; k++) + pci_unmap_single(VORTEX_PCI(vp), + le32_to_cpu(vp->tx_ring[i].frag[k].addr), + le32_to_cpu(vp->tx_ring[i].frag[k].length)&0xFFF, + PCI_DMA_TODEVICE); +#else + pci_unmap_single(VORTEX_PCI(vp), le32_to_cpu(vp->tx_ring[i].addr), skb->len, PCI_DMA_TODEVICE); +#endif + dev_kfree_skb(skb); + vp->tx_skbuff[i] = NULL; + } + } + } + + return 0; +} + +static void +dump_tx_ring(struct net_device *dev) +{ + if (vortex_debug > 0) { + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + + if (vp->full_bus_master_tx) { + int i; + int stalled = ioread32(ioaddr + PktStatus) & 0x04; /* Possible racy. But it's only debug stuff */ + + pr_err(" Flags; bus-master %d, dirty %d(%d) current %d(%d)\n", + vp->full_bus_master_tx, + vp->dirty_tx, vp->dirty_tx % TX_RING_SIZE, + vp->cur_tx, vp->cur_tx % TX_RING_SIZE); + pr_err(" Transmit list %8.8x vs. %p.\n", + ioread32(ioaddr + DownListPtr), + &vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]); + issue_and_wait(dev, DownStall); + for (i = 0; i < TX_RING_SIZE; i++) { + unsigned int length; + +#if DO_ZEROCOPY + length = le32_to_cpu(vp->tx_ring[i].frag[0].length); +#else + length = le32_to_cpu(vp->tx_ring[i].length); +#endif + pr_err(" %d: @%p length %8.8x status %8.8x\n", + i, &vp->tx_ring[i], length, + le32_to_cpu(vp->tx_ring[i].status)); + } + if (!stalled) + iowrite16(DownUnstall, ioaddr + EL3_CMD); + } + } +} + +static struct net_device_stats *vortex_get_stats(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + unsigned long flags; + + if (netif_device_present(dev)) { /* AKPM: Used to be netif_running */ + spin_lock_irqsave (&vp->lock, flags); + update_stats(ioaddr, dev); + spin_unlock_irqrestore (&vp->lock, flags); + } + return &dev->stats; +} + +/* Update statistics. + Unlike with the EL3 we need not worry about interrupts changing + the window setting from underneath us, but we must still guard + against a race condition with a StatsUpdate interrupt updating the + table. This is done by checking that the ASM (!) code generated uses + atomic updates with '+='. + */ +static void update_stats(void __iomem *ioaddr, struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + + /* Unlike the 3c5x9 we need not turn off stats updates while reading. */ + /* Switch to the stats window, and read everything. */ + dev->stats.tx_carrier_errors += window_read8(vp, 6, 0); + dev->stats.tx_heartbeat_errors += window_read8(vp, 6, 1); + dev->stats.tx_window_errors += window_read8(vp, 6, 4); + dev->stats.rx_fifo_errors += window_read8(vp, 6, 5); + dev->stats.tx_packets += window_read8(vp, 6, 6); + dev->stats.tx_packets += (window_read8(vp, 6, 9) & + 0x30) << 4; + /* Rx packets */ window_read8(vp, 6, 7); /* Must read to clear */ + /* Don't bother with register 9, an extension of registers 6&7. + If we do use the 6&7 values the atomic update assumption above + is invalid. */ + dev->stats.rx_bytes += window_read16(vp, 6, 10); + dev->stats.tx_bytes += window_read16(vp, 6, 12); + /* Extra stats for get_ethtool_stats() */ + vp->xstats.tx_multiple_collisions += window_read8(vp, 6, 2); + vp->xstats.tx_single_collisions += window_read8(vp, 6, 3); + vp->xstats.tx_deferred += window_read8(vp, 6, 8); + vp->xstats.rx_bad_ssd += window_read8(vp, 4, 12); + + dev->stats.collisions = vp->xstats.tx_multiple_collisions + + vp->xstats.tx_single_collisions + + vp->xstats.tx_max_collisions; + + { + u8 up = window_read8(vp, 4, 13); + dev->stats.rx_bytes += (up & 0x0f) << 16; + dev->stats.tx_bytes += (up & 0xf0) << 12; + } +} + +static int vortex_nway_reset(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + + return mii_nway_restart(&vp->mii); +} + +static int vortex_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct vortex_private *vp = netdev_priv(dev); + + return mii_ethtool_gset(&vp->mii, cmd); +} + +static int vortex_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct vortex_private *vp = netdev_priv(dev); + + return mii_ethtool_sset(&vp->mii, cmd); +} + +static u32 vortex_get_msglevel(struct net_device *dev) +{ + return vortex_debug; +} + +static void vortex_set_msglevel(struct net_device *dev, u32 dbg) +{ + vortex_debug = dbg; +} + +static int vortex_get_sset_count(struct net_device *dev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return VORTEX_NUM_STATS; + default: + return -EOPNOTSUPP; + } +} + +static void vortex_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 *data) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + unsigned long flags; + + spin_lock_irqsave(&vp->lock, flags); + update_stats(ioaddr, dev); + spin_unlock_irqrestore(&vp->lock, flags); + + data[0] = vp->xstats.tx_deferred; + data[1] = vp->xstats.tx_max_collisions; + data[2] = vp->xstats.tx_multiple_collisions; + data[3] = vp->xstats.tx_single_collisions; + data[4] = vp->xstats.rx_bad_ssd; +} + + +static void vortex_get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + switch (stringset) { + case ETH_SS_STATS: + memcpy(data, ðtool_stats_keys, sizeof(ethtool_stats_keys)); + break; + default: + WARN_ON(1); + break; + } +} + +static void vortex_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct vortex_private *vp = netdev_priv(dev); + + strcpy(info->driver, DRV_NAME); + if (VORTEX_PCI(vp)) { + strcpy(info->bus_info, pci_name(VORTEX_PCI(vp))); + } else { + if (VORTEX_EISA(vp)) + strcpy(info->bus_info, dev_name(vp->gendev)); + else + sprintf(info->bus_info, "EISA 0x%lx %d", + dev->base_addr, dev->irq); + } +} + +static void vortex_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct vortex_private *vp = netdev_priv(dev); + + if (!VORTEX_PCI(vp)) + return; + + wol->supported = WAKE_MAGIC; + + wol->wolopts = 0; + if (vp->enable_wol) + wol->wolopts |= WAKE_MAGIC; +} + +static int vortex_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct vortex_private *vp = netdev_priv(dev); + + if (!VORTEX_PCI(vp)) + return -EOPNOTSUPP; + + if (wol->wolopts & ~WAKE_MAGIC) + return -EINVAL; + + if (wol->wolopts & WAKE_MAGIC) + vp->enable_wol = 1; + else + vp->enable_wol = 0; + acpi_set_WOL(dev); + + return 0; +} + +static const struct ethtool_ops vortex_ethtool_ops = { + .get_drvinfo = vortex_get_drvinfo, + .get_strings = vortex_get_strings, + .get_msglevel = vortex_get_msglevel, + .set_msglevel = vortex_set_msglevel, + .get_ethtool_stats = vortex_get_ethtool_stats, + .get_sset_count = vortex_get_sset_count, + .get_settings = vortex_get_settings, + .set_settings = vortex_set_settings, + .get_link = ethtool_op_get_link, + .nway_reset = vortex_nway_reset, + .get_wol = vortex_get_wol, + .set_wol = vortex_set_wol, +}; + +#ifdef CONFIG_PCI +/* + * Must power the device up to do MDIO operations + */ +static int vortex_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + int err; + struct vortex_private *vp = netdev_priv(dev); + pci_power_t state = 0; + + if(VORTEX_PCI(vp)) + state = VORTEX_PCI(vp)->current_state; + + /* The kernel core really should have pci_get_power_state() */ + + if(state != 0) + pci_set_power_state(VORTEX_PCI(vp), PCI_D0); + err = generic_mii_ioctl(&vp->mii, if_mii(rq), cmd, NULL); + if(state != 0) + pci_set_power_state(VORTEX_PCI(vp), state); + + return err; +} +#endif + + +/* Pre-Cyclone chips have no documented multicast filter, so the only + multicast setting is to receive all multicast frames. At least + the chip has a very clean way to set the mode, unlike many others. */ +static void set_rx_mode(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + int new_mode; + + if (dev->flags & IFF_PROMISC) { + if (vortex_debug > 3) + pr_notice("%s: Setting promiscuous mode.\n", dev->name); + new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast|RxProm; + } else if (!netdev_mc_empty(dev) || dev->flags & IFF_ALLMULTI) { + new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast; + } else + new_mode = SetRxFilter | RxStation | RxBroadcast; + + iowrite16(new_mode, ioaddr + EL3_CMD); +} + +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +/* Setup the card so that it can receive frames with an 802.1q VLAN tag. + Note that this must be done after each RxReset due to some backwards + compatibility logic in the Cyclone and Tornado ASICs */ + +/* The Ethernet Type used for 802.1q tagged frames */ +#define VLAN_ETHER_TYPE 0x8100 + +static void set_8021q_mode(struct net_device *dev, int enable) +{ + struct vortex_private *vp = netdev_priv(dev); + int mac_ctrl; + + if ((vp->drv_flags&IS_CYCLONE) || (vp->drv_flags&IS_TORNADO)) { + /* cyclone and tornado chipsets can recognize 802.1q + * tagged frames and treat them correctly */ + + int max_pkt_size = dev->mtu+14; /* MTU+Ethernet header */ + if (enable) + max_pkt_size += 4; /* 802.1Q VLAN tag */ + + window_write16(vp, max_pkt_size, 3, Wn3_MaxPktSize); + + /* set VlanEtherType to let the hardware checksumming + treat tagged frames correctly */ + window_write16(vp, VLAN_ETHER_TYPE, 7, Wn7_VlanEtherType); + } else { + /* on older cards we have to enable large frames */ + + vp->large_frames = dev->mtu > 1500 || enable; + + mac_ctrl = window_read16(vp, 3, Wn3_MAC_Ctrl); + if (vp->large_frames) + mac_ctrl |= 0x40; + else + mac_ctrl &= ~0x40; + window_write16(vp, mac_ctrl, 3, Wn3_MAC_Ctrl); + } +} +#else + +static void set_8021q_mode(struct net_device *dev, int enable) +{ +} + + +#endif + +/* MII transceiver control section. + Read and write the MII registers using software-generated serial + MDIO protocol. See the MII specifications or DP83840A data sheet + for details. */ + +/* The maximum data clock rate is 2.5 Mhz. The minimum timing is usually + met by back-to-back PCI I/O cycles, but we insert a delay to avoid + "overclocking" issues. */ +static void mdio_delay(struct vortex_private *vp) +{ + window_read32(vp, 4, Wn4_PhysicalMgmt); +} + +#define MDIO_SHIFT_CLK 0x01 +#define MDIO_DIR_WRITE 0x04 +#define MDIO_DATA_WRITE0 (0x00 | MDIO_DIR_WRITE) +#define MDIO_DATA_WRITE1 (0x02 | MDIO_DIR_WRITE) +#define MDIO_DATA_READ 0x02 +#define MDIO_ENB_IN 0x00 + +/* Generate the preamble required for initial synchronization and + a few older transceivers. */ +static void mdio_sync(struct vortex_private *vp, int bits) +{ + /* Establish sync by sending at least 32 logic ones. */ + while (-- bits >= 0) { + window_write16(vp, MDIO_DATA_WRITE1, 4, Wn4_PhysicalMgmt); + mdio_delay(vp); + window_write16(vp, MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, + 4, Wn4_PhysicalMgmt); + mdio_delay(vp); + } +} + +static int mdio_read(struct net_device *dev, int phy_id, int location) +{ + int i; + struct vortex_private *vp = netdev_priv(dev); + int read_cmd = (0xf6 << 10) | (phy_id << 5) | location; + unsigned int retval = 0; + + spin_lock_bh(&vp->mii_lock); + + if (mii_preamble_required) + mdio_sync(vp, 32); + + /* Shift the read command bits out. */ + for (i = 14; i >= 0; i--) { + int dataval = (read_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; + window_write16(vp, dataval, 4, Wn4_PhysicalMgmt); + mdio_delay(vp); + window_write16(vp, dataval | MDIO_SHIFT_CLK, + 4, Wn4_PhysicalMgmt); + mdio_delay(vp); + } + /* Read the two transition, 16 data, and wire-idle bits. */ + for (i = 19; i > 0; i--) { + window_write16(vp, MDIO_ENB_IN, 4, Wn4_PhysicalMgmt); + mdio_delay(vp); + retval = (retval << 1) | + ((window_read16(vp, 4, Wn4_PhysicalMgmt) & + MDIO_DATA_READ) ? 1 : 0); + window_write16(vp, MDIO_ENB_IN | MDIO_SHIFT_CLK, + 4, Wn4_PhysicalMgmt); + mdio_delay(vp); + } + + spin_unlock_bh(&vp->mii_lock); + + return retval & 0x20000 ? 0xffff : retval>>1 & 0xffff; +} + +static void mdio_write(struct net_device *dev, int phy_id, int location, int value) +{ + struct vortex_private *vp = netdev_priv(dev); + int write_cmd = 0x50020000 | (phy_id << 23) | (location << 18) | value; + int i; + + spin_lock_bh(&vp->mii_lock); + + if (mii_preamble_required) + mdio_sync(vp, 32); + + /* Shift the command bits out. */ + for (i = 31; i >= 0; i--) { + int dataval = (write_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; + window_write16(vp, dataval, 4, Wn4_PhysicalMgmt); + mdio_delay(vp); + window_write16(vp, dataval | MDIO_SHIFT_CLK, + 4, Wn4_PhysicalMgmt); + mdio_delay(vp); + } + /* Leave the interface idle. */ + for (i = 1; i >= 0; i--) { + window_write16(vp, MDIO_ENB_IN, 4, Wn4_PhysicalMgmt); + mdio_delay(vp); + window_write16(vp, MDIO_ENB_IN | MDIO_SHIFT_CLK, + 4, Wn4_PhysicalMgmt); + mdio_delay(vp); + } + + spin_unlock_bh(&vp->mii_lock); +} + +/* ACPI: Advanced Configuration and Power Interface. */ +/* Set Wake-On-LAN mode and put the board into D3 (power-down) state. */ +static void acpi_set_WOL(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + + device_set_wakeup_enable(vp->gendev, vp->enable_wol); + + if (vp->enable_wol) { + /* Power up on: 1==Downloaded Filter, 2==Magic Packets, 4==Link Status. */ + window_write16(vp, 2, 7, 0x0c); + /* The RxFilter must accept the WOL frames. */ + iowrite16(SetRxFilter|RxStation|RxMulticast|RxBroadcast, ioaddr + EL3_CMD); + iowrite16(RxEnable, ioaddr + EL3_CMD); + + if (pci_enable_wake(VORTEX_PCI(vp), PCI_D3hot, 1)) { + pr_info("%s: WOL not supported.\n", pci_name(VORTEX_PCI(vp))); + + vp->enable_wol = 0; + return; + } + + if (VORTEX_PCI(vp)->current_state < PCI_D3hot) + return; + + /* Change the power state to D3; RxEnable doesn't take effect. */ + pci_set_power_state(VORTEX_PCI(vp), PCI_D3hot); + } +} + + +static void __devexit vortex_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct vortex_private *vp; + + if (!dev) { + pr_err("vortex_remove_one called for Compaq device!\n"); + BUG(); + } + + vp = netdev_priv(dev); + + if (vp->cb_fn_base) + pci_iounmap(VORTEX_PCI(vp), vp->cb_fn_base); + + unregister_netdev(dev); + + if (VORTEX_PCI(vp)) { + pci_set_power_state(VORTEX_PCI(vp), PCI_D0); /* Go active */ + if (vp->pm_state_valid) + pci_restore_state(VORTEX_PCI(vp)); + pci_disable_device(VORTEX_PCI(vp)); + } + /* Should really use issue_and_wait() here */ + iowrite16(TotalReset | ((vp->drv_flags & EEPROM_RESET) ? 0x04 : 0x14), + vp->ioaddr + EL3_CMD); + + pci_iounmap(VORTEX_PCI(vp), vp->ioaddr); + + pci_free_consistent(pdev, + sizeof(struct boom_rx_desc) * RX_RING_SIZE + + sizeof(struct boom_tx_desc) * TX_RING_SIZE, + vp->rx_ring, + vp->rx_ring_dma); + if (vp->must_free_region) + release_region(dev->base_addr, vp->io_size); + free_netdev(dev); +} + + +static struct pci_driver vortex_driver = { + .name = "3c59x", + .probe = vortex_init_one, + .remove = __devexit_p(vortex_remove_one), + .id_table = vortex_pci_tbl, + .driver.pm = VORTEX_PM_OPS, +}; + + +static int vortex_have_pci; +static int vortex_have_eisa; + + +static int __init vortex_init(void) +{ + int pci_rc, eisa_rc; + + pci_rc = pci_register_driver(&vortex_driver); + eisa_rc = vortex_eisa_init(); + + if (pci_rc == 0) + vortex_have_pci = 1; + if (eisa_rc > 0) + vortex_have_eisa = 1; + + return (vortex_have_pci + vortex_have_eisa) ? 0 : -ENODEV; +} + + +static void __exit vortex_eisa_cleanup(void) +{ + struct vortex_private *vp; + void __iomem *ioaddr; + +#ifdef CONFIG_EISA + /* Take care of the EISA devices */ + eisa_driver_unregister(&vortex_eisa_driver); +#endif + + if (compaq_net_device) { + vp = netdev_priv(compaq_net_device); + ioaddr = ioport_map(compaq_net_device->base_addr, + VORTEX_TOTAL_SIZE); + + unregister_netdev(compaq_net_device); + iowrite16(TotalReset, ioaddr + EL3_CMD); + release_region(compaq_net_device->base_addr, + VORTEX_TOTAL_SIZE); + + free_netdev(compaq_net_device); + } +} + + +static void __exit vortex_cleanup(void) +{ + if (vortex_have_pci) + pci_unregister_driver(&vortex_driver); + if (vortex_have_eisa) + vortex_eisa_cleanup(); +} + + +module_init(vortex_init); +module_exit(vortex_cleanup); diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig new file mode 100644 index 000000000000..497f038dcd47 --- /dev/null +++ b/drivers/net/ethernet/3com/Kconfig @@ -0,0 +1,147 @@ +# +# 3Com Ethernet device configuration +# + +config NET_VENDOR_3COM + bool "3Com devices" + depends on ISA || EISA || MCA || PCI || PCMCIA + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about 3Com cards. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_3COM + +config EL1 + tristate "3c501 \"EtherLink\" support" + depends on ISA + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. Also, consider buying a + new card, since the 3c501 is slow, broken, and obsolete: you will + have problems. Some people suggest to ping ("man ping") a nearby + machine every minute ("man cron") when using this card. + + To compile this driver as a module, choose M here. The module + will be called 3c501. + +config EL3 + tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support" + depends on (ISA || EISA || MCA) + ---help--- + If you have a network (Ethernet) card belonging to the 3Com + EtherLinkIII series, say Y and read the Ethernet-HOWTO, available + from <http://www.tldp.org/docs.html#howto>. + + If your card is not working you may need to use the DOS + setup disk to disable Plug & Play mode, and to select the default + media type. + + To compile this driver as a module, choose M here. The module + will be called 3c509. + +config 3C515 + tristate "3c515 ISA \"Fast EtherLink\"" + depends on (ISA || EISA) && ISA_DMA_API + ---help--- + If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet + network card, say Y and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called 3c515. + +config PCMCIA_3C574 + tristate "3Com 3c574 PCMCIA support" + depends on PCMCIA + ---help--- + Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA + (PC-card) Fast Ethernet card to your computer. + + To compile this driver as a module, choose M here: the module will be + called 3c574_cs. If unsure, say N. + +config PCMCIA_3C589 + tristate "3Com 3c589 PCMCIA support" + depends on PCMCIA + ---help--- + Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA + (PC-card) Ethernet card to your computer. + + To compile this driver as a module, choose M here: the module will be + called 3c589_cs. If unsure, say N. + +config VORTEX + tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support" + depends on (PCI || EISA) + select MII + ---help--- + This option enables driver support for a large number of 10Mbps and + 10/100Mbps EISA, PCI and PCMCIA 3Com network cards: + + "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI + "Boomerang" (EtherLink XL 3c900 or 3c905) PCI + "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus + "Tornado" (3c905) PCI + "Hurricane" (3c555/3cSOHO) PCI + + If you have such a card, say Y and read the Ethernet-HOWTO, + available from <http://www.tldp.org/docs.html#howto>. More + specific information is in + <file:Documentation/networking/vortex.txt> and in the comments at + the beginning of <file:drivers/net/3c59x.c>. + + To compile this support as a module, choose M here. + +config TYPHOON + tristate "3cr990 series \"Typhoon\" support" + depends on PCI + select CRC32 + ---help--- + This option enables driver support for the 3cr990 series of cards: + + 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97, + 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server, + 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR + + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called typhoon. + +config ACENIC + tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support" + depends on PCI + ---help--- + Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear + GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet + adapter. The driver allows for using the Jumbo Frame option (9000 + bytes/frame) however it requires that your switches can handle this + as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig + line. + + To compile this driver as a module, choose M here: the + module will be called acenic. + +config ACENIC_OMIT_TIGON_I + bool "Omit support for old Tigon I based AceNICs" + depends on ACENIC + ---help--- + Say Y here if you only have Tigon II based AceNICs and want to leave + out support for the older Tigon I based cards which are no longer + being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B + version)). This will reduce the size of the driver object by + app. 100KB. If you are not sure whether your card is a Tigon I or a + Tigon II, say N here. + + The safe and default value for this is N. + +endif # NET_VENDOR_3COM diff --git a/drivers/net/ethernet/3com/Makefile b/drivers/net/ethernet/3com/Makefile new file mode 100644 index 000000000000..96d1d60d67b6 --- /dev/null +++ b/drivers/net/ethernet/3com/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for the 3Com Ethernet device drivers +# + +obj-$(CONFIG_EL1) += 3c501.o +obj-$(CONFIG_EL3) += 3c509.o +obj-$(CONFIG_3C515) += 3c515.o +obj-$(CONFIG_PCMCIA_3C589) += 3c589_cs.o +obj-$(CONFIG_PCMCIA_3C574) += 3c574_cs.o +obj-$(CONFIG_VORTEX) += 3c59x.o +obj-$(CONFIG_ACENIC) += acenic.o +obj-$(CONFIG_TYPHOON) += typhoon.o diff --git a/drivers/net/ethernet/3com/acenic.c b/drivers/net/ethernet/3com/acenic.c new file mode 100644 index 000000000000..31798f5f5d06 --- /dev/null +++ b/drivers/net/ethernet/3com/acenic.c @@ -0,0 +1,3206 @@ +/* + * acenic.c: Linux driver for the Alteon AceNIC Gigabit Ethernet card + * and other Tigon based cards. + * + * Copyright 1998-2002 by Jes Sorensen, <jes@trained-monkey.org>. + * + * Thanks to Alteon and 3Com for providing hardware and documentation + * enabling me to write this driver. + * + * A mailing list for discussing the use of this driver has been + * setup, please subscribe to the lists if you have any questions + * about the driver. Send mail to linux-acenic-help@sunsite.auc.dk to + * see how to subscribe. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Additional credits: + * Pete Wyckoff <wyckoff@ca.sandia.gov>: Initial Linux/Alpha and trace + * dump support. The trace dump support has not been + * integrated yet however. + * Troy Benjegerdes: Big Endian (PPC) patches. + * Nate Stahl: Better out of memory handling and stats support. + * Aman Singla: Nasty race between interrupt handler and tx code dealing + * with 'testing the tx_ret_csm and setting tx_full' + * David S. Miller <davem@redhat.com>: conversion to new PCI dma mapping + * infrastructure and Sparc support + * Pierrick Pinasseau (CERN): For lending me an Ultra 5 to test the + * driver under Linux/Sparc64 + * Matt Domsch <Matt_Domsch@dell.com>: Detect Alteon 1000baseT cards + * ETHTOOL_GDRVINFO support + * Chip Salzenberg <chip@valinux.com>: Fix race condition between tx + * handler and close() cleanup. + * Ken Aaker <kdaaker@rchland.vnet.ibm.com>: Correct check for whether + * memory mapped IO is enabled to + * make the driver work on RS/6000. + * Takayoshi Kouchi <kouchi@hpc.bs1.fc.nec.co.jp>: Identifying problem + * where the driver would disable + * bus master mode if it had to disable + * write and invalidate. + * Stephen Hack <stephen_hack@hp.com>: Fixed ace_set_mac_addr for little + * endian systems. + * Val Henson <vhenson@esscom.com>: Reset Jumbo skb producer and + * rx producer index when + * flushing the Jumbo ring. + * Hans Grobler <grobh@sun.ac.za>: Memory leak fixes in the + * driver init path. + * Grant Grundler <grundler@cup.hp.com>: PCI write posting fixes. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/kernel.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/mm.h> +#include <linux/highmem.h> +#include <linux/sockios.h> +#include <linux/firmware.h> +#include <linux/slab.h> +#include <linux/prefetch.h> +#include <linux/if_vlan.h> + +#ifdef SIOCETHTOOL +#include <linux/ethtool.h> +#endif + +#include <net/sock.h> +#include <net/ip.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/byteorder.h> +#include <asm/uaccess.h> + + +#define DRV_NAME "acenic" + +#undef INDEX_DEBUG + +#ifdef CONFIG_ACENIC_OMIT_TIGON_I +#define ACE_IS_TIGON_I(ap) 0 +#define ACE_TX_RING_ENTRIES(ap) MAX_TX_RING_ENTRIES +#else +#define ACE_IS_TIGON_I(ap) (ap->version == 1) +#define ACE_TX_RING_ENTRIES(ap) ap->tx_ring_entries +#endif + +#ifndef PCI_VENDOR_ID_ALTEON +#define PCI_VENDOR_ID_ALTEON 0x12ae +#endif +#ifndef PCI_DEVICE_ID_ALTEON_ACENIC_FIBRE +#define PCI_DEVICE_ID_ALTEON_ACENIC_FIBRE 0x0001 +#define PCI_DEVICE_ID_ALTEON_ACENIC_COPPER 0x0002 +#endif +#ifndef PCI_DEVICE_ID_3COM_3C985 +#define PCI_DEVICE_ID_3COM_3C985 0x0001 +#endif +#ifndef PCI_VENDOR_ID_NETGEAR +#define PCI_VENDOR_ID_NETGEAR 0x1385 +#define PCI_DEVICE_ID_NETGEAR_GA620 0x620a +#endif +#ifndef PCI_DEVICE_ID_NETGEAR_GA620T +#define PCI_DEVICE_ID_NETGEAR_GA620T 0x630a +#endif + + +/* + * Farallon used the DEC vendor ID by mistake and they seem not + * to care - stinky! + */ +#ifndef PCI_DEVICE_ID_FARALLON_PN9000SX +#define PCI_DEVICE_ID_FARALLON_PN9000SX 0x1a +#endif +#ifndef PCI_DEVICE_ID_FARALLON_PN9100T +#define PCI_DEVICE_ID_FARALLON_PN9100T 0xfa +#endif +#ifndef PCI_VENDOR_ID_SGI +#define PCI_VENDOR_ID_SGI 0x10a9 +#endif +#ifndef PCI_DEVICE_ID_SGI_ACENIC +#define PCI_DEVICE_ID_SGI_ACENIC 0x0009 +#endif + +static DEFINE_PCI_DEVICE_TABLE(acenic_pci_tbl) = { + { PCI_VENDOR_ID_ALTEON, PCI_DEVICE_ID_ALTEON_ACENIC_FIBRE, + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, }, + { PCI_VENDOR_ID_ALTEON, PCI_DEVICE_ID_ALTEON_ACENIC_COPPER, + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, }, + { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C985, + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, }, + { PCI_VENDOR_ID_NETGEAR, PCI_DEVICE_ID_NETGEAR_GA620, + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, }, + { PCI_VENDOR_ID_NETGEAR, PCI_DEVICE_ID_NETGEAR_GA620T, + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, }, + /* + * Farallon used the DEC vendor ID on their cards incorrectly, + * then later Alteon's ID. + */ + { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_FARALLON_PN9000SX, + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, }, + { PCI_VENDOR_ID_ALTEON, PCI_DEVICE_ID_FARALLON_PN9100T, + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, }, + { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_ACENIC, + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, }, + { } +}; +MODULE_DEVICE_TABLE(pci, acenic_pci_tbl); + +#define ace_sync_irq(irq) synchronize_irq(irq) + +#ifndef offset_in_page +#define offset_in_page(ptr) ((unsigned long)(ptr) & ~PAGE_MASK) +#endif + +#define ACE_MAX_MOD_PARMS 8 +#define BOARD_IDX_STATIC 0 +#define BOARD_IDX_OVERFLOW -1 + +#include "acenic.h" + +/* + * These must be defined before the firmware is included. + */ +#define MAX_TEXT_LEN 96*1024 +#define MAX_RODATA_LEN 8*1024 +#define MAX_DATA_LEN 2*1024 + +#ifndef tigon2FwReleaseLocal +#define tigon2FwReleaseLocal 0 +#endif + +/* + * This driver currently supports Tigon I and Tigon II based cards + * including the Alteon AceNIC, the 3Com 3C985[B] and NetGear + * GA620. The driver should also work on the SGI, DEC and Farallon + * versions of the card, however I have not been able to test that + * myself. + * + * This card is really neat, it supports receive hardware checksumming + * and jumbo frames (up to 9000 bytes) and does a lot of work in the + * firmware. Also the programming interface is quite neat, except for + * the parts dealing with the i2c eeprom on the card ;-) + * + * Using jumbo frames: + * + * To enable jumbo frames, simply specify an mtu between 1500 and 9000 + * bytes to ifconfig. Jumbo frames can be enabled or disabled at any time + * by running `ifconfig eth<X> mtu <MTU>' with <X> being the Ethernet + * interface number and <MTU> being the MTU value. + * + * Module parameters: + * + * When compiled as a loadable module, the driver allows for a number + * of module parameters to be specified. The driver supports the + * following module parameters: + * + * trace=<val> - Firmware trace level. This requires special traced + * firmware to replace the firmware supplied with + * the driver - for debugging purposes only. + * + * link=<val> - Link state. Normally you want to use the default link + * parameters set by the driver. This can be used to + * override these in case your switch doesn't negotiate + * the link properly. Valid values are: + * 0x0001 - Force half duplex link. + * 0x0002 - Do not negotiate line speed with the other end. + * 0x0010 - 10Mbit/sec link. + * 0x0020 - 100Mbit/sec link. + * 0x0040 - 1000Mbit/sec link. + * 0x0100 - Do not negotiate flow control. + * 0x0200 - Enable RX flow control Y + * 0x0400 - Enable TX flow control Y (Tigon II NICs only). + * Default value is 0x0270, ie. enable link+flow + * control negotiation. Negotiating the highest + * possible link speed with RX flow control enabled. + * + * When disabling link speed negotiation, only one link + * speed is allowed to be specified! + * + * tx_coal_tick=<val> - number of coalescing clock ticks (us) allowed + * to wait for more packets to arive before + * interrupting the host, from the time the first + * packet arrives. + * + * rx_coal_tick=<val> - number of coalescing clock ticks (us) allowed + * to wait for more packets to arive in the transmit ring, + * before interrupting the host, after transmitting the + * first packet in the ring. + * + * max_tx_desc=<val> - maximum number of transmit descriptors + * (packets) transmitted before interrupting the host. + * + * max_rx_desc=<val> - maximum number of receive descriptors + * (packets) received before interrupting the host. + * + * tx_ratio=<val> - 7 bit value (0 - 63) specifying the split in 64th + * increments of the NIC's on board memory to be used for + * transmit and receive buffers. For the 1MB NIC app. 800KB + * is available, on the 1/2MB NIC app. 300KB is available. + * 68KB will always be available as a minimum for both + * directions. The default value is a 50/50 split. + * dis_pci_mem_inval=<val> - disable PCI memory write and invalidate + * operations, default (1) is to always disable this as + * that is what Alteon does on NT. I have not been able + * to measure any real performance differences with + * this on my systems. Set <val>=0 if you want to + * enable these operations. + * + * If you use more than one NIC, specify the parameters for the + * individual NICs with a comma, ie. trace=0,0x00001fff,0 you want to + * run tracing on NIC #2 but not on NIC #1 and #3. + * + * TODO: + * + * - Proper multicast support. + * - NIC dump support. + * - More tuning parameters. + * + * The mini ring is not used under Linux and I am not sure it makes sense + * to actually use it. + * + * New interrupt handler strategy: + * + * The old interrupt handler worked using the traditional method of + * replacing an skbuff with a new one when a packet arrives. However + * the rx rings do not need to contain a static number of buffer + * descriptors, thus it makes sense to move the memory allocation out + * of the main interrupt handler and do it in a bottom half handler + * and only allocate new buffers when the number of buffers in the + * ring is below a certain threshold. In order to avoid starving the + * NIC under heavy load it is however necessary to force allocation + * when hitting a minimum threshold. The strategy for alloction is as + * follows: + * + * RX_LOW_BUF_THRES - allocate buffers in the bottom half + * RX_PANIC_LOW_THRES - we are very low on buffers, allocate + * the buffers in the interrupt handler + * RX_RING_THRES - maximum number of buffers in the rx ring + * RX_MINI_THRES - maximum number of buffers in the mini ring + * RX_JUMBO_THRES - maximum number of buffers in the jumbo ring + * + * One advantagous side effect of this allocation approach is that the + * entire rx processing can be done without holding any spin lock + * since the rx rings and registers are totally independent of the tx + * ring and its registers. This of course includes the kmalloc's of + * new skb's. Thus start_xmit can run in parallel with rx processing + * and the memory allocation on SMP systems. + * + * Note that running the skb reallocation in a bottom half opens up + * another can of races which needs to be handled properly. In + * particular it can happen that the interrupt handler tries to run + * the reallocation while the bottom half is either running on another + * CPU or was interrupted on the same CPU. To get around this the + * driver uses bitops to prevent the reallocation routines from being + * reentered. + * + * TX handling can also be done without holding any spin lock, wheee + * this is fun! since tx_ret_csm is only written to by the interrupt + * handler. The case to be aware of is when shutting down the device + * and cleaning up where it is necessary to make sure that + * start_xmit() is not running while this is happening. Well DaveM + * informs me that this case is already protected against ... bye bye + * Mr. Spin Lock, it was nice to know you. + * + * TX interrupts are now partly disabled so the NIC will only generate + * TX interrupts for the number of coal ticks, not for the number of + * TX packets in the queue. This should reduce the number of TX only, + * ie. when no RX processing is done, interrupts seen. + */ + +/* + * Threshold values for RX buffer allocation - the low water marks for + * when to start refilling the rings are set to 75% of the ring + * sizes. It seems to make sense to refill the rings entirely from the + * intrrupt handler once it gets below the panic threshold, that way + * we don't risk that the refilling is moved to another CPU when the + * one running the interrupt handler just got the slab code hot in its + * cache. + */ +#define RX_RING_SIZE 72 +#define RX_MINI_SIZE 64 +#define RX_JUMBO_SIZE 48 + +#define RX_PANIC_STD_THRES 16 +#define RX_PANIC_STD_REFILL (3*RX_PANIC_STD_THRES)/2 +#define RX_LOW_STD_THRES (3*RX_RING_SIZE)/4 +#define RX_PANIC_MINI_THRES 12 +#define RX_PANIC_MINI_REFILL (3*RX_PANIC_MINI_THRES)/2 +#define RX_LOW_MINI_THRES (3*RX_MINI_SIZE)/4 +#define RX_PANIC_JUMBO_THRES 6 +#define RX_PANIC_JUMBO_REFILL (3*RX_PANIC_JUMBO_THRES)/2 +#define RX_LOW_JUMBO_THRES (3*RX_JUMBO_SIZE)/4 + + +/* + * Size of the mini ring entries, basically these just should be big + * enough to take TCP ACKs + */ +#define ACE_MINI_SIZE 100 + +#define ACE_MINI_BUFSIZE ACE_MINI_SIZE +#define ACE_STD_BUFSIZE (ACE_STD_MTU + ETH_HLEN + 4) +#define ACE_JUMBO_BUFSIZE (ACE_JUMBO_MTU + ETH_HLEN + 4) + +/* + * There seems to be a magic difference in the effect between 995 and 996 + * but little difference between 900 and 995 ... no idea why. + * + * There is now a default set of tuning parameters which is set, depending + * on whether or not the user enables Jumbo frames. It's assumed that if + * Jumbo frames are enabled, the user wants optimal tuning for that case. + */ +#define DEF_TX_COAL 400 /* 996 */ +#define DEF_TX_MAX_DESC 60 /* was 40 */ +#define DEF_RX_COAL 120 /* 1000 */ +#define DEF_RX_MAX_DESC 25 +#define DEF_TX_RATIO 21 /* 24 */ + +#define DEF_JUMBO_TX_COAL 20 +#define DEF_JUMBO_TX_MAX_DESC 60 +#define DEF_JUMBO_RX_COAL 30 +#define DEF_JUMBO_RX_MAX_DESC 6 +#define DEF_JUMBO_TX_RATIO 21 + +#if tigon2FwReleaseLocal < 20001118 +/* + * Standard firmware and early modifications duplicate + * IRQ load without this flag (coal timer is never reset). + * Note that with this flag tx_coal should be less than + * time to xmit full tx ring. + * 400usec is not so bad for tx ring size of 128. + */ +#define TX_COAL_INTS_ONLY 1 /* worth it */ +#else +/* + * With modified firmware, this is not necessary, but still useful. + */ +#define TX_COAL_INTS_ONLY 1 +#endif + +#define DEF_TRACE 0 +#define DEF_STAT (2 * TICKS_PER_SEC) + + +static int link_state[ACE_MAX_MOD_PARMS]; +static int trace[ACE_MAX_MOD_PARMS]; +static int tx_coal_tick[ACE_MAX_MOD_PARMS]; +static int rx_coal_tick[ACE_MAX_MOD_PARMS]; +static int max_tx_desc[ACE_MAX_MOD_PARMS]; +static int max_rx_desc[ACE_MAX_MOD_PARMS]; +static int tx_ratio[ACE_MAX_MOD_PARMS]; +static int dis_pci_mem_inval[ACE_MAX_MOD_PARMS] = {1, 1, 1, 1, 1, 1, 1, 1}; + +MODULE_AUTHOR("Jes Sorensen <jes@trained-monkey.org>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("AceNIC/3C985/GA620 Gigabit Ethernet driver"); +#ifndef CONFIG_ACENIC_OMIT_TIGON_I +MODULE_FIRMWARE("acenic/tg1.bin"); +#endif +MODULE_FIRMWARE("acenic/tg2.bin"); + +module_param_array_named(link, link_state, int, NULL, 0); +module_param_array(trace, int, NULL, 0); +module_param_array(tx_coal_tick, int, NULL, 0); +module_param_array(max_tx_desc, int, NULL, 0); +module_param_array(rx_coal_tick, int, NULL, 0); +module_param_array(max_rx_desc, int, NULL, 0); +module_param_array(tx_ratio, int, NULL, 0); +MODULE_PARM_DESC(link, "AceNIC/3C985/NetGear link state"); +MODULE_PARM_DESC(trace, "AceNIC/3C985/NetGear firmware trace level"); +MODULE_PARM_DESC(tx_coal_tick, "AceNIC/3C985/GA620 max clock ticks to wait from first tx descriptor arrives"); +MODULE_PARM_DESC(max_tx_desc, "AceNIC/3C985/GA620 max number of transmit descriptors to wait"); +MODULE_PARM_DESC(rx_coal_tick, "AceNIC/3C985/GA620 max clock ticks to wait from first rx descriptor arrives"); +MODULE_PARM_DESC(max_rx_desc, "AceNIC/3C985/GA620 max number of receive descriptors to wait"); +MODULE_PARM_DESC(tx_ratio, "AceNIC/3C985/GA620 ratio of NIC memory used for TX/RX descriptors (range 0-63)"); + + +static const char version[] __devinitconst = + "acenic.c: v0.92 08/05/2002 Jes Sorensen, linux-acenic@SunSITE.dk\n" + " http://home.cern.ch/~jes/gige/acenic.html\n"; + +static int ace_get_settings(struct net_device *, struct ethtool_cmd *); +static int ace_set_settings(struct net_device *, struct ethtool_cmd *); +static void ace_get_drvinfo(struct net_device *, struct ethtool_drvinfo *); + +static const struct ethtool_ops ace_ethtool_ops = { + .get_settings = ace_get_settings, + .set_settings = ace_set_settings, + .get_drvinfo = ace_get_drvinfo, +}; + +static void ace_watchdog(struct net_device *dev); + +static const struct net_device_ops ace_netdev_ops = { + .ndo_open = ace_open, + .ndo_stop = ace_close, + .ndo_tx_timeout = ace_watchdog, + .ndo_get_stats = ace_get_stats, + .ndo_start_xmit = ace_start_xmit, + .ndo_set_multicast_list = ace_set_multicast_list, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = ace_set_mac_addr, + .ndo_change_mtu = ace_change_mtu, +}; + +static int __devinit acenic_probe_one(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct net_device *dev; + struct ace_private *ap; + static int boards_found; + + dev = alloc_etherdev(sizeof(struct ace_private)); + if (dev == NULL) { + printk(KERN_ERR "acenic: Unable to allocate " + "net_device structure!\n"); + return -ENOMEM; + } + + SET_NETDEV_DEV(dev, &pdev->dev); + + ap = netdev_priv(dev); + ap->pdev = pdev; + ap->name = pci_name(pdev); + + dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; + dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; + + dev->watchdog_timeo = 5*HZ; + + dev->netdev_ops = &ace_netdev_ops; + SET_ETHTOOL_OPS(dev, &ace_ethtool_ops); + + /* we only display this string ONCE */ + if (!boards_found) + printk(version); + + if (pci_enable_device(pdev)) + goto fail_free_netdev; + + /* + * Enable master mode before we start playing with the + * pci_command word since pci_set_master() will modify + * it. + */ + pci_set_master(pdev); + + pci_read_config_word(pdev, PCI_COMMAND, &ap->pci_command); + + /* OpenFirmware on Mac's does not set this - DOH.. */ + if (!(ap->pci_command & PCI_COMMAND_MEMORY)) { + printk(KERN_INFO "%s: Enabling PCI Memory Mapped " + "access - was not enabled by BIOS/Firmware\n", + ap->name); + ap->pci_command = ap->pci_command | PCI_COMMAND_MEMORY; + pci_write_config_word(ap->pdev, PCI_COMMAND, + ap->pci_command); + wmb(); + } + + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &ap->pci_latency); + if (ap->pci_latency <= 0x40) { + ap->pci_latency = 0x40; + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, ap->pci_latency); + } + + /* + * Remap the regs into kernel space - this is abuse of + * dev->base_addr since it was means for I/O port + * addresses but who gives a damn. + */ + dev->base_addr = pci_resource_start(pdev, 0); + ap->regs = ioremap(dev->base_addr, 0x4000); + if (!ap->regs) { + printk(KERN_ERR "%s: Unable to map I/O register, " + "AceNIC %i will be disabled.\n", + ap->name, boards_found); + goto fail_free_netdev; + } + + switch(pdev->vendor) { + case PCI_VENDOR_ID_ALTEON: + if (pdev->device == PCI_DEVICE_ID_FARALLON_PN9100T) { + printk(KERN_INFO "%s: Farallon PN9100-T ", + ap->name); + } else { + printk(KERN_INFO "%s: Alteon AceNIC ", + ap->name); + } + break; + case PCI_VENDOR_ID_3COM: + printk(KERN_INFO "%s: 3Com 3C985 ", ap->name); + break; + case PCI_VENDOR_ID_NETGEAR: + printk(KERN_INFO "%s: NetGear GA620 ", ap->name); + break; + case PCI_VENDOR_ID_DEC: + if (pdev->device == PCI_DEVICE_ID_FARALLON_PN9000SX) { + printk(KERN_INFO "%s: Farallon PN9000-SX ", + ap->name); + break; + } + case PCI_VENDOR_ID_SGI: + printk(KERN_INFO "%s: SGI AceNIC ", ap->name); + break; + default: + printk(KERN_INFO "%s: Unknown AceNIC ", ap->name); + break; + } + + printk("Gigabit Ethernet at 0x%08lx, ", dev->base_addr); + printk("irq %d\n", pdev->irq); + +#ifdef CONFIG_ACENIC_OMIT_TIGON_I + if ((readl(&ap->regs->HostCtrl) >> 28) == 4) { + printk(KERN_ERR "%s: Driver compiled without Tigon I" + " support - NIC disabled\n", dev->name); + goto fail_uninit; + } +#endif + + if (ace_allocate_descriptors(dev)) + goto fail_free_netdev; + +#ifdef MODULE + if (boards_found >= ACE_MAX_MOD_PARMS) + ap->board_idx = BOARD_IDX_OVERFLOW; + else + ap->board_idx = boards_found; +#else + ap->board_idx = BOARD_IDX_STATIC; +#endif + + if (ace_init(dev)) + goto fail_free_netdev; + + if (register_netdev(dev)) { + printk(KERN_ERR "acenic: device registration failed\n"); + goto fail_uninit; + } + ap->name = dev->name; + + if (ap->pci_using_dac) + dev->features |= NETIF_F_HIGHDMA; + + pci_set_drvdata(pdev, dev); + + boards_found++; + return 0; + + fail_uninit: + ace_init_cleanup(dev); + fail_free_netdev: + free_netdev(dev); + return -ENODEV; +} + +static void __devexit acenic_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + short i; + + unregister_netdev(dev); + + writel(readl(®s->CpuCtrl) | CPU_HALT, ®s->CpuCtrl); + if (ap->version >= 2) + writel(readl(®s->CpuBCtrl) | CPU_HALT, ®s->CpuBCtrl); + + /* + * This clears any pending interrupts + */ + writel(1, ®s->Mb0Lo); + readl(®s->CpuCtrl); /* flush */ + + /* + * Make sure no other CPUs are processing interrupts + * on the card before the buffers are being released. + * Otherwise one might experience some `interesting' + * effects. + * + * Then release the RX buffers - jumbo buffers were + * already released in ace_close(). + */ + ace_sync_irq(dev->irq); + + for (i = 0; i < RX_STD_RING_ENTRIES; i++) { + struct sk_buff *skb = ap->skb->rx_std_skbuff[i].skb; + + if (skb) { + struct ring_info *ringp; + dma_addr_t mapping; + + ringp = &ap->skb->rx_std_skbuff[i]; + mapping = dma_unmap_addr(ringp, mapping); + pci_unmap_page(ap->pdev, mapping, + ACE_STD_BUFSIZE, + PCI_DMA_FROMDEVICE); + + ap->rx_std_ring[i].size = 0; + ap->skb->rx_std_skbuff[i].skb = NULL; + dev_kfree_skb(skb); + } + } + + if (ap->version >= 2) { + for (i = 0; i < RX_MINI_RING_ENTRIES; i++) { + struct sk_buff *skb = ap->skb->rx_mini_skbuff[i].skb; + + if (skb) { + struct ring_info *ringp; + dma_addr_t mapping; + + ringp = &ap->skb->rx_mini_skbuff[i]; + mapping = dma_unmap_addr(ringp,mapping); + pci_unmap_page(ap->pdev, mapping, + ACE_MINI_BUFSIZE, + PCI_DMA_FROMDEVICE); + + ap->rx_mini_ring[i].size = 0; + ap->skb->rx_mini_skbuff[i].skb = NULL; + dev_kfree_skb(skb); + } + } + } + + for (i = 0; i < RX_JUMBO_RING_ENTRIES; i++) { + struct sk_buff *skb = ap->skb->rx_jumbo_skbuff[i].skb; + if (skb) { + struct ring_info *ringp; + dma_addr_t mapping; + + ringp = &ap->skb->rx_jumbo_skbuff[i]; + mapping = dma_unmap_addr(ringp, mapping); + pci_unmap_page(ap->pdev, mapping, + ACE_JUMBO_BUFSIZE, + PCI_DMA_FROMDEVICE); + + ap->rx_jumbo_ring[i].size = 0; + ap->skb->rx_jumbo_skbuff[i].skb = NULL; + dev_kfree_skb(skb); + } + } + + ace_init_cleanup(dev); + free_netdev(dev); +} + +static struct pci_driver acenic_pci_driver = { + .name = "acenic", + .id_table = acenic_pci_tbl, + .probe = acenic_probe_one, + .remove = __devexit_p(acenic_remove_one), +}; + +static int __init acenic_init(void) +{ + return pci_register_driver(&acenic_pci_driver); +} + +static void __exit acenic_exit(void) +{ + pci_unregister_driver(&acenic_pci_driver); +} + +module_init(acenic_init); +module_exit(acenic_exit); + +static void ace_free_descriptors(struct net_device *dev) +{ + struct ace_private *ap = netdev_priv(dev); + int size; + + if (ap->rx_std_ring != NULL) { + size = (sizeof(struct rx_desc) * + (RX_STD_RING_ENTRIES + + RX_JUMBO_RING_ENTRIES + + RX_MINI_RING_ENTRIES + + RX_RETURN_RING_ENTRIES)); + pci_free_consistent(ap->pdev, size, ap->rx_std_ring, + ap->rx_ring_base_dma); + ap->rx_std_ring = NULL; + ap->rx_jumbo_ring = NULL; + ap->rx_mini_ring = NULL; + ap->rx_return_ring = NULL; + } + if (ap->evt_ring != NULL) { + size = (sizeof(struct event) * EVT_RING_ENTRIES); + pci_free_consistent(ap->pdev, size, ap->evt_ring, + ap->evt_ring_dma); + ap->evt_ring = NULL; + } + if (ap->tx_ring != NULL && !ACE_IS_TIGON_I(ap)) { + size = (sizeof(struct tx_desc) * MAX_TX_RING_ENTRIES); + pci_free_consistent(ap->pdev, size, ap->tx_ring, + ap->tx_ring_dma); + } + ap->tx_ring = NULL; + + if (ap->evt_prd != NULL) { + pci_free_consistent(ap->pdev, sizeof(u32), + (void *)ap->evt_prd, ap->evt_prd_dma); + ap->evt_prd = NULL; + } + if (ap->rx_ret_prd != NULL) { + pci_free_consistent(ap->pdev, sizeof(u32), + (void *)ap->rx_ret_prd, + ap->rx_ret_prd_dma); + ap->rx_ret_prd = NULL; + } + if (ap->tx_csm != NULL) { + pci_free_consistent(ap->pdev, sizeof(u32), + (void *)ap->tx_csm, ap->tx_csm_dma); + ap->tx_csm = NULL; + } +} + + +static int ace_allocate_descriptors(struct net_device *dev) +{ + struct ace_private *ap = netdev_priv(dev); + int size; + + size = (sizeof(struct rx_desc) * + (RX_STD_RING_ENTRIES + + RX_JUMBO_RING_ENTRIES + + RX_MINI_RING_ENTRIES + + RX_RETURN_RING_ENTRIES)); + + ap->rx_std_ring = pci_alloc_consistent(ap->pdev, size, + &ap->rx_ring_base_dma); + if (ap->rx_std_ring == NULL) + goto fail; + + ap->rx_jumbo_ring = ap->rx_std_ring + RX_STD_RING_ENTRIES; + ap->rx_mini_ring = ap->rx_jumbo_ring + RX_JUMBO_RING_ENTRIES; + ap->rx_return_ring = ap->rx_mini_ring + RX_MINI_RING_ENTRIES; + + size = (sizeof(struct event) * EVT_RING_ENTRIES); + + ap->evt_ring = pci_alloc_consistent(ap->pdev, size, &ap->evt_ring_dma); + + if (ap->evt_ring == NULL) + goto fail; + + /* + * Only allocate a host TX ring for the Tigon II, the Tigon I + * has to use PCI registers for this ;-( + */ + if (!ACE_IS_TIGON_I(ap)) { + size = (sizeof(struct tx_desc) * MAX_TX_RING_ENTRIES); + + ap->tx_ring = pci_alloc_consistent(ap->pdev, size, + &ap->tx_ring_dma); + + if (ap->tx_ring == NULL) + goto fail; + } + + ap->evt_prd = pci_alloc_consistent(ap->pdev, sizeof(u32), + &ap->evt_prd_dma); + if (ap->evt_prd == NULL) + goto fail; + + ap->rx_ret_prd = pci_alloc_consistent(ap->pdev, sizeof(u32), + &ap->rx_ret_prd_dma); + if (ap->rx_ret_prd == NULL) + goto fail; + + ap->tx_csm = pci_alloc_consistent(ap->pdev, sizeof(u32), + &ap->tx_csm_dma); + if (ap->tx_csm == NULL) + goto fail; + + return 0; + +fail: + /* Clean up. */ + ace_init_cleanup(dev); + return 1; +} + + +/* + * Generic cleanup handling data allocated during init. Used when the + * module is unloaded or if an error occurs during initialization + */ +static void ace_init_cleanup(struct net_device *dev) +{ + struct ace_private *ap; + + ap = netdev_priv(dev); + + ace_free_descriptors(dev); + + if (ap->info) + pci_free_consistent(ap->pdev, sizeof(struct ace_info), + ap->info, ap->info_dma); + kfree(ap->skb); + kfree(ap->trace_buf); + + if (dev->irq) + free_irq(dev->irq, dev); + + iounmap(ap->regs); +} + + +/* + * Commands are considered to be slow. + */ +static inline void ace_issue_cmd(struct ace_regs __iomem *regs, struct cmd *cmd) +{ + u32 idx; + + idx = readl(®s->CmdPrd); + + writel(*(u32 *)(cmd), ®s->CmdRng[idx]); + idx = (idx + 1) % CMD_RING_ENTRIES; + + writel(idx, ®s->CmdPrd); +} + + +static int __devinit ace_init(struct net_device *dev) +{ + struct ace_private *ap; + struct ace_regs __iomem *regs; + struct ace_info *info = NULL; + struct pci_dev *pdev; + unsigned long myjif; + u64 tmp_ptr; + u32 tig_ver, mac1, mac2, tmp, pci_state; + int board_idx, ecode = 0; + short i; + unsigned char cache_size; + + ap = netdev_priv(dev); + regs = ap->regs; + + board_idx = ap->board_idx; + + /* + * aman@sgi.com - its useful to do a NIC reset here to + * address the `Firmware not running' problem subsequent + * to any crashes involving the NIC + */ + writel(HW_RESET | (HW_RESET << 24), ®s->HostCtrl); + readl(®s->HostCtrl); /* PCI write posting */ + udelay(5); + + /* + * Don't access any other registers before this point! + */ +#ifdef __BIG_ENDIAN + /* + * This will most likely need BYTE_SWAP once we switch + * to using __raw_writel() + */ + writel((WORD_SWAP | CLR_INT | ((WORD_SWAP | CLR_INT) << 24)), + ®s->HostCtrl); +#else + writel((CLR_INT | WORD_SWAP | ((CLR_INT | WORD_SWAP) << 24)), + ®s->HostCtrl); +#endif + readl(®s->HostCtrl); /* PCI write posting */ + + /* + * Stop the NIC CPU and clear pending interrupts + */ + writel(readl(®s->CpuCtrl) | CPU_HALT, ®s->CpuCtrl); + readl(®s->CpuCtrl); /* PCI write posting */ + writel(0, ®s->Mb0Lo); + + tig_ver = readl(®s->HostCtrl) >> 28; + + switch(tig_ver){ +#ifndef CONFIG_ACENIC_OMIT_TIGON_I + case 4: + case 5: + printk(KERN_INFO " Tigon I (Rev. %i), Firmware: %i.%i.%i, ", + tig_ver, ap->firmware_major, ap->firmware_minor, + ap->firmware_fix); + writel(0, ®s->LocalCtrl); + ap->version = 1; + ap->tx_ring_entries = TIGON_I_TX_RING_ENTRIES; + break; +#endif + case 6: + printk(KERN_INFO " Tigon II (Rev. %i), Firmware: %i.%i.%i, ", + tig_ver, ap->firmware_major, ap->firmware_minor, + ap->firmware_fix); + writel(readl(®s->CpuBCtrl) | CPU_HALT, ®s->CpuBCtrl); + readl(®s->CpuBCtrl); /* PCI write posting */ + /* + * The SRAM bank size does _not_ indicate the amount + * of memory on the card, it controls the _bank_ size! + * Ie. a 1MB AceNIC will have two banks of 512KB. + */ + writel(SRAM_BANK_512K, ®s->LocalCtrl); + writel(SYNC_SRAM_TIMING, ®s->MiscCfg); + ap->version = 2; + ap->tx_ring_entries = MAX_TX_RING_ENTRIES; + break; + default: + printk(KERN_WARNING " Unsupported Tigon version detected " + "(%i)\n", tig_ver); + ecode = -ENODEV; + goto init_error; + } + + /* + * ModeStat _must_ be set after the SRAM settings as this change + * seems to corrupt the ModeStat and possible other registers. + * The SRAM settings survive resets and setting it to the same + * value a second time works as well. This is what caused the + * `Firmware not running' problem on the Tigon II. + */ +#ifdef __BIG_ENDIAN + writel(ACE_BYTE_SWAP_DMA | ACE_WARN | ACE_FATAL | ACE_BYTE_SWAP_BD | + ACE_WORD_SWAP_BD | ACE_NO_JUMBO_FRAG, ®s->ModeStat); +#else + writel(ACE_BYTE_SWAP_DMA | ACE_WARN | ACE_FATAL | + ACE_WORD_SWAP_BD | ACE_NO_JUMBO_FRAG, ®s->ModeStat); +#endif + readl(®s->ModeStat); /* PCI write posting */ + + mac1 = 0; + for(i = 0; i < 4; i++) { + int t; + + mac1 = mac1 << 8; + t = read_eeprom_byte(dev, 0x8c+i); + if (t < 0) { + ecode = -EIO; + goto init_error; + } else + mac1 |= (t & 0xff); + } + mac2 = 0; + for(i = 4; i < 8; i++) { + int t; + + mac2 = mac2 << 8; + t = read_eeprom_byte(dev, 0x8c+i); + if (t < 0) { + ecode = -EIO; + goto init_error; + } else + mac2 |= (t & 0xff); + } + + writel(mac1, ®s->MacAddrHi); + writel(mac2, ®s->MacAddrLo); + + dev->dev_addr[0] = (mac1 >> 8) & 0xff; + dev->dev_addr[1] = mac1 & 0xff; + dev->dev_addr[2] = (mac2 >> 24) & 0xff; + dev->dev_addr[3] = (mac2 >> 16) & 0xff; + dev->dev_addr[4] = (mac2 >> 8) & 0xff; + dev->dev_addr[5] = mac2 & 0xff; + + printk("MAC: %pM\n", dev->dev_addr); + + /* + * Looks like this is necessary to deal with on all architectures, + * even this %$#%$# N440BX Intel based thing doesn't get it right. + * Ie. having two NICs in the machine, one will have the cache + * line set at boot time, the other will not. + */ + pdev = ap->pdev; + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_size); + cache_size <<= 2; + if (cache_size != SMP_CACHE_BYTES) { + printk(KERN_INFO " PCI cache line size set incorrectly " + "(%i bytes) by BIOS/FW, ", cache_size); + if (cache_size > SMP_CACHE_BYTES) + printk("expecting %i\n", SMP_CACHE_BYTES); + else { + printk("correcting to %i\n", SMP_CACHE_BYTES); + pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, + SMP_CACHE_BYTES >> 2); + } + } + + pci_state = readl(®s->PciState); + printk(KERN_INFO " PCI bus width: %i bits, speed: %iMHz, " + "latency: %i clks\n", + (pci_state & PCI_32BIT) ? 32 : 64, + (pci_state & PCI_66MHZ) ? 66 : 33, + ap->pci_latency); + + /* + * Set the max DMA transfer size. Seems that for most systems + * the performance is better when no MAX parameter is + * set. However for systems enabling PCI write and invalidate, + * DMA writes must be set to the L1 cache line size to get + * optimal performance. + * + * The default is now to turn the PCI write and invalidate off + * - that is what Alteon does for NT. + */ + tmp = READ_CMD_MEM | WRITE_CMD_MEM; + if (ap->version >= 2) { + tmp |= (MEM_READ_MULTIPLE | (pci_state & PCI_66MHZ)); + /* + * Tuning parameters only supported for 8 cards + */ + if (board_idx == BOARD_IDX_OVERFLOW || + dis_pci_mem_inval[board_idx]) { + if (ap->pci_command & PCI_COMMAND_INVALIDATE) { + ap->pci_command &= ~PCI_COMMAND_INVALIDATE; + pci_write_config_word(pdev, PCI_COMMAND, + ap->pci_command); + printk(KERN_INFO " Disabling PCI memory " + "write and invalidate\n"); + } + } else if (ap->pci_command & PCI_COMMAND_INVALIDATE) { + printk(KERN_INFO " PCI memory write & invalidate " + "enabled by BIOS, enabling counter measures\n"); + + switch(SMP_CACHE_BYTES) { + case 16: + tmp |= DMA_WRITE_MAX_16; + break; + case 32: + tmp |= DMA_WRITE_MAX_32; + break; + case 64: + tmp |= DMA_WRITE_MAX_64; + break; + case 128: + tmp |= DMA_WRITE_MAX_128; + break; + default: + printk(KERN_INFO " Cache line size %i not " + "supported, PCI write and invalidate " + "disabled\n", SMP_CACHE_BYTES); + ap->pci_command &= ~PCI_COMMAND_INVALIDATE; + pci_write_config_word(pdev, PCI_COMMAND, + ap->pci_command); + } + } + } + +#ifdef __sparc__ + /* + * On this platform, we know what the best dma settings + * are. We use 64-byte maximum bursts, because if we + * burst larger than the cache line size (or even cross + * a 64byte boundary in a single burst) the UltraSparc + * PCI controller will disconnect at 64-byte multiples. + * + * Read-multiple will be properly enabled above, and when + * set will give the PCI controller proper hints about + * prefetching. + */ + tmp &= ~DMA_READ_WRITE_MASK; + tmp |= DMA_READ_MAX_64; + tmp |= DMA_WRITE_MAX_64; +#endif +#ifdef __alpha__ + tmp &= ~DMA_READ_WRITE_MASK; + tmp |= DMA_READ_MAX_128; + /* + * All the docs say MUST NOT. Well, I did. + * Nothing terrible happens, if we load wrong size. + * Bit w&i still works better! + */ + tmp |= DMA_WRITE_MAX_128; +#endif + writel(tmp, ®s->PciState); + +#if 0 + /* + * The Host PCI bus controller driver has to set FBB. + * If all devices on that PCI bus support FBB, then the controller + * can enable FBB support in the Host PCI Bus controller (or on + * the PCI-PCI bridge if that applies). + * -ggg + */ + /* + * I have received reports from people having problems when this + * bit is enabled. + */ + if (!(ap->pci_command & PCI_COMMAND_FAST_BACK)) { + printk(KERN_INFO " Enabling PCI Fast Back to Back\n"); + ap->pci_command |= PCI_COMMAND_FAST_BACK; + pci_write_config_word(pdev, PCI_COMMAND, ap->pci_command); + } +#endif + + /* + * Configure DMA attributes. + */ + if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { + ap->pci_using_dac = 1; + } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { + ap->pci_using_dac = 0; + } else { + ecode = -ENODEV; + goto init_error; + } + + /* + * Initialize the generic info block and the command+event rings + * and the control blocks for the transmit and receive rings + * as they need to be setup once and for all. + */ + if (!(info = pci_alloc_consistent(ap->pdev, sizeof(struct ace_info), + &ap->info_dma))) { + ecode = -EAGAIN; + goto init_error; + } + ap->info = info; + + /* + * Get the memory for the skb rings. + */ + if (!(ap->skb = kmalloc(sizeof(struct ace_skb), GFP_KERNEL))) { + ecode = -EAGAIN; + goto init_error; + } + + ecode = request_irq(pdev->irq, ace_interrupt, IRQF_SHARED, + DRV_NAME, dev); + if (ecode) { + printk(KERN_WARNING "%s: Requested IRQ %d is busy\n", + DRV_NAME, pdev->irq); + goto init_error; + } else + dev->irq = pdev->irq; + +#ifdef INDEX_DEBUG + spin_lock_init(&ap->debug_lock); + ap->last_tx = ACE_TX_RING_ENTRIES(ap) - 1; + ap->last_std_rx = 0; + ap->last_mini_rx = 0; +#endif + + memset(ap->info, 0, sizeof(struct ace_info)); + memset(ap->skb, 0, sizeof(struct ace_skb)); + + ecode = ace_load_firmware(dev); + if (ecode) + goto init_error; + + ap->fw_running = 0; + + tmp_ptr = ap->info_dma; + writel(tmp_ptr >> 32, ®s->InfoPtrHi); + writel(tmp_ptr & 0xffffffff, ®s->InfoPtrLo); + + memset(ap->evt_ring, 0, EVT_RING_ENTRIES * sizeof(struct event)); + + set_aceaddr(&info->evt_ctrl.rngptr, ap->evt_ring_dma); + info->evt_ctrl.flags = 0; + + *(ap->evt_prd) = 0; + wmb(); + set_aceaddr(&info->evt_prd_ptr, ap->evt_prd_dma); + writel(0, ®s->EvtCsm); + + set_aceaddr(&info->cmd_ctrl.rngptr, 0x100); + info->cmd_ctrl.flags = 0; + info->cmd_ctrl.max_len = 0; + + for (i = 0; i < CMD_RING_ENTRIES; i++) + writel(0, ®s->CmdRng[i]); + + writel(0, ®s->CmdPrd); + writel(0, ®s->CmdCsm); + + tmp_ptr = ap->info_dma; + tmp_ptr += (unsigned long) &(((struct ace_info *)0)->s.stats); + set_aceaddr(&info->stats2_ptr, (dma_addr_t) tmp_ptr); + + set_aceaddr(&info->rx_std_ctrl.rngptr, ap->rx_ring_base_dma); + info->rx_std_ctrl.max_len = ACE_STD_BUFSIZE; + info->rx_std_ctrl.flags = + RCB_FLG_TCP_UDP_SUM | RCB_FLG_NO_PSEUDO_HDR | RCB_FLG_VLAN_ASSIST; + + memset(ap->rx_std_ring, 0, + RX_STD_RING_ENTRIES * sizeof(struct rx_desc)); + + for (i = 0; i < RX_STD_RING_ENTRIES; i++) + ap->rx_std_ring[i].flags = BD_FLG_TCP_UDP_SUM; + + ap->rx_std_skbprd = 0; + atomic_set(&ap->cur_rx_bufs, 0); + + set_aceaddr(&info->rx_jumbo_ctrl.rngptr, + (ap->rx_ring_base_dma + + (sizeof(struct rx_desc) * RX_STD_RING_ENTRIES))); + info->rx_jumbo_ctrl.max_len = 0; + info->rx_jumbo_ctrl.flags = + RCB_FLG_TCP_UDP_SUM | RCB_FLG_NO_PSEUDO_HDR | RCB_FLG_VLAN_ASSIST; + + memset(ap->rx_jumbo_ring, 0, + RX_JUMBO_RING_ENTRIES * sizeof(struct rx_desc)); + + for (i = 0; i < RX_JUMBO_RING_ENTRIES; i++) + ap->rx_jumbo_ring[i].flags = BD_FLG_TCP_UDP_SUM | BD_FLG_JUMBO; + + ap->rx_jumbo_skbprd = 0; + atomic_set(&ap->cur_jumbo_bufs, 0); + + memset(ap->rx_mini_ring, 0, + RX_MINI_RING_ENTRIES * sizeof(struct rx_desc)); + + if (ap->version >= 2) { + set_aceaddr(&info->rx_mini_ctrl.rngptr, + (ap->rx_ring_base_dma + + (sizeof(struct rx_desc) * + (RX_STD_RING_ENTRIES + + RX_JUMBO_RING_ENTRIES)))); + info->rx_mini_ctrl.max_len = ACE_MINI_SIZE; + info->rx_mini_ctrl.flags = + RCB_FLG_TCP_UDP_SUM|RCB_FLG_NO_PSEUDO_HDR|RCB_FLG_VLAN_ASSIST; + + for (i = 0; i < RX_MINI_RING_ENTRIES; i++) + ap->rx_mini_ring[i].flags = + BD_FLG_TCP_UDP_SUM | BD_FLG_MINI; + } else { + set_aceaddr(&info->rx_mini_ctrl.rngptr, 0); + info->rx_mini_ctrl.flags = RCB_FLG_RNG_DISABLE; + info->rx_mini_ctrl.max_len = 0; + } + + ap->rx_mini_skbprd = 0; + atomic_set(&ap->cur_mini_bufs, 0); + + set_aceaddr(&info->rx_return_ctrl.rngptr, + (ap->rx_ring_base_dma + + (sizeof(struct rx_desc) * + (RX_STD_RING_ENTRIES + + RX_JUMBO_RING_ENTRIES + + RX_MINI_RING_ENTRIES)))); + info->rx_return_ctrl.flags = 0; + info->rx_return_ctrl.max_len = RX_RETURN_RING_ENTRIES; + + memset(ap->rx_return_ring, 0, + RX_RETURN_RING_ENTRIES * sizeof(struct rx_desc)); + + set_aceaddr(&info->rx_ret_prd_ptr, ap->rx_ret_prd_dma); + *(ap->rx_ret_prd) = 0; + + writel(TX_RING_BASE, ®s->WinBase); + + if (ACE_IS_TIGON_I(ap)) { + ap->tx_ring = (__force struct tx_desc *) regs->Window; + for (i = 0; i < (TIGON_I_TX_RING_ENTRIES + * sizeof(struct tx_desc)) / sizeof(u32); i++) + writel(0, (__force void __iomem *)ap->tx_ring + i * 4); + + set_aceaddr(&info->tx_ctrl.rngptr, TX_RING_BASE); + } else { + memset(ap->tx_ring, 0, + MAX_TX_RING_ENTRIES * sizeof(struct tx_desc)); + + set_aceaddr(&info->tx_ctrl.rngptr, ap->tx_ring_dma); + } + + info->tx_ctrl.max_len = ACE_TX_RING_ENTRIES(ap); + tmp = RCB_FLG_TCP_UDP_SUM | RCB_FLG_NO_PSEUDO_HDR | RCB_FLG_VLAN_ASSIST; + + /* + * The Tigon I does not like having the TX ring in host memory ;-( + */ + if (!ACE_IS_TIGON_I(ap)) + tmp |= RCB_FLG_TX_HOST_RING; +#if TX_COAL_INTS_ONLY + tmp |= RCB_FLG_COAL_INT_ONLY; +#endif + info->tx_ctrl.flags = tmp; + + set_aceaddr(&info->tx_csm_ptr, ap->tx_csm_dma); + + /* + * Potential item for tuning parameter + */ +#if 0 /* NO */ + writel(DMA_THRESH_16W, ®s->DmaReadCfg); + writel(DMA_THRESH_16W, ®s->DmaWriteCfg); +#else + writel(DMA_THRESH_8W, ®s->DmaReadCfg); + writel(DMA_THRESH_8W, ®s->DmaWriteCfg); +#endif + + writel(0, ®s->MaskInt); + writel(1, ®s->IfIdx); +#if 0 + /* + * McKinley boxes do not like us fiddling with AssistState + * this early + */ + writel(1, ®s->AssistState); +#endif + + writel(DEF_STAT, ®s->TuneStatTicks); + writel(DEF_TRACE, ®s->TuneTrace); + + ace_set_rxtx_parms(dev, 0); + + if (board_idx == BOARD_IDX_OVERFLOW) { + printk(KERN_WARNING "%s: more than %i NICs detected, " + "ignoring module parameters!\n", + ap->name, ACE_MAX_MOD_PARMS); + } else if (board_idx >= 0) { + if (tx_coal_tick[board_idx]) + writel(tx_coal_tick[board_idx], + ®s->TuneTxCoalTicks); + if (max_tx_desc[board_idx]) + writel(max_tx_desc[board_idx], ®s->TuneMaxTxDesc); + + if (rx_coal_tick[board_idx]) + writel(rx_coal_tick[board_idx], + ®s->TuneRxCoalTicks); + if (max_rx_desc[board_idx]) + writel(max_rx_desc[board_idx], ®s->TuneMaxRxDesc); + + if (trace[board_idx]) + writel(trace[board_idx], ®s->TuneTrace); + + if ((tx_ratio[board_idx] > 0) && (tx_ratio[board_idx] < 64)) + writel(tx_ratio[board_idx], ®s->TxBufRat); + } + + /* + * Default link parameters + */ + tmp = LNK_ENABLE | LNK_FULL_DUPLEX | LNK_1000MB | LNK_100MB | + LNK_10MB | LNK_RX_FLOW_CTL_Y | LNK_NEG_FCTL | LNK_NEGOTIATE; + if(ap->version >= 2) + tmp |= LNK_TX_FLOW_CTL_Y; + + /* + * Override link default parameters + */ + if ((board_idx >= 0) && link_state[board_idx]) { + int option = link_state[board_idx]; + + tmp = LNK_ENABLE; + + if (option & 0x01) { + printk(KERN_INFO "%s: Setting half duplex link\n", + ap->name); + tmp &= ~LNK_FULL_DUPLEX; + } + if (option & 0x02) + tmp &= ~LNK_NEGOTIATE; + if (option & 0x10) + tmp |= LNK_10MB; + if (option & 0x20) + tmp |= LNK_100MB; + if (option & 0x40) + tmp |= LNK_1000MB; + if ((option & 0x70) == 0) { + printk(KERN_WARNING "%s: No media speed specified, " + "forcing auto negotiation\n", ap->name); + tmp |= LNK_NEGOTIATE | LNK_1000MB | + LNK_100MB | LNK_10MB; + } + if ((option & 0x100) == 0) + tmp |= LNK_NEG_FCTL; + else + printk(KERN_INFO "%s: Disabling flow control " + "negotiation\n", ap->name); + if (option & 0x200) + tmp |= LNK_RX_FLOW_CTL_Y; + if ((option & 0x400) && (ap->version >= 2)) { + printk(KERN_INFO "%s: Enabling TX flow control\n", + ap->name); + tmp |= LNK_TX_FLOW_CTL_Y; + } + } + + ap->link = tmp; + writel(tmp, ®s->TuneLink); + if (ap->version >= 2) + writel(tmp, ®s->TuneFastLink); + + writel(ap->firmware_start, ®s->Pc); + + writel(0, ®s->Mb0Lo); + + /* + * Set tx_csm before we start receiving interrupts, otherwise + * the interrupt handler might think it is supposed to process + * tx ints before we are up and running, which may cause a null + * pointer access in the int handler. + */ + ap->cur_rx = 0; + ap->tx_prd = *(ap->tx_csm) = ap->tx_ret_csm = 0; + + wmb(); + ace_set_txprd(regs, ap, 0); + writel(0, ®s->RxRetCsm); + + /* + * Enable DMA engine now. + * If we do this sooner, Mckinley box pukes. + * I assume it's because Tigon II DMA engine wants to check + * *something* even before the CPU is started. + */ + writel(1, ®s->AssistState); /* enable DMA */ + + /* + * Start the NIC CPU + */ + writel(readl(®s->CpuCtrl) & ~(CPU_HALT|CPU_TRACE), ®s->CpuCtrl); + readl(®s->CpuCtrl); + + /* + * Wait for the firmware to spin up - max 3 seconds. + */ + myjif = jiffies + 3 * HZ; + while (time_before(jiffies, myjif) && !ap->fw_running) + cpu_relax(); + + if (!ap->fw_running) { + printk(KERN_ERR "%s: Firmware NOT running!\n", ap->name); + + ace_dump_trace(ap); + writel(readl(®s->CpuCtrl) | CPU_HALT, ®s->CpuCtrl); + readl(®s->CpuCtrl); + + /* aman@sgi.com - account for badly behaving firmware/NIC: + * - have observed that the NIC may continue to generate + * interrupts for some reason; attempt to stop it - halt + * second CPU for Tigon II cards, and also clear Mb0 + * - if we're a module, we'll fail to load if this was + * the only GbE card in the system => if the kernel does + * see an interrupt from the NIC, code to handle it is + * gone and OOps! - so free_irq also + */ + if (ap->version >= 2) + writel(readl(®s->CpuBCtrl) | CPU_HALT, + ®s->CpuBCtrl); + writel(0, ®s->Mb0Lo); + readl(®s->Mb0Lo); + + ecode = -EBUSY; + goto init_error; + } + + /* + * We load the ring here as there seem to be no way to tell the + * firmware to wipe the ring without re-initializing it. + */ + if (!test_and_set_bit(0, &ap->std_refill_busy)) + ace_load_std_rx_ring(dev, RX_RING_SIZE); + else + printk(KERN_ERR "%s: Someone is busy refilling the RX ring\n", + ap->name); + if (ap->version >= 2) { + if (!test_and_set_bit(0, &ap->mini_refill_busy)) + ace_load_mini_rx_ring(dev, RX_MINI_SIZE); + else + printk(KERN_ERR "%s: Someone is busy refilling " + "the RX mini ring\n", ap->name); + } + return 0; + + init_error: + ace_init_cleanup(dev); + return ecode; +} + + +static void ace_set_rxtx_parms(struct net_device *dev, int jumbo) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + int board_idx = ap->board_idx; + + if (board_idx >= 0) { + if (!jumbo) { + if (!tx_coal_tick[board_idx]) + writel(DEF_TX_COAL, ®s->TuneTxCoalTicks); + if (!max_tx_desc[board_idx]) + writel(DEF_TX_MAX_DESC, ®s->TuneMaxTxDesc); + if (!rx_coal_tick[board_idx]) + writel(DEF_RX_COAL, ®s->TuneRxCoalTicks); + if (!max_rx_desc[board_idx]) + writel(DEF_RX_MAX_DESC, ®s->TuneMaxRxDesc); + if (!tx_ratio[board_idx]) + writel(DEF_TX_RATIO, ®s->TxBufRat); + } else { + if (!tx_coal_tick[board_idx]) + writel(DEF_JUMBO_TX_COAL, + ®s->TuneTxCoalTicks); + if (!max_tx_desc[board_idx]) + writel(DEF_JUMBO_TX_MAX_DESC, + ®s->TuneMaxTxDesc); + if (!rx_coal_tick[board_idx]) + writel(DEF_JUMBO_RX_COAL, + ®s->TuneRxCoalTicks); + if (!max_rx_desc[board_idx]) + writel(DEF_JUMBO_RX_MAX_DESC, + ®s->TuneMaxRxDesc); + if (!tx_ratio[board_idx]) + writel(DEF_JUMBO_TX_RATIO, ®s->TxBufRat); + } + } +} + + +static void ace_watchdog(struct net_device *data) +{ + struct net_device *dev = data; + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + + /* + * We haven't received a stats update event for more than 2.5 + * seconds and there is data in the transmit queue, thus we + * assume the card is stuck. + */ + if (*ap->tx_csm != ap->tx_ret_csm) { + printk(KERN_WARNING "%s: Transmitter is stuck, %08x\n", + dev->name, (unsigned int)readl(®s->HostCtrl)); + /* This can happen due to ieee flow control. */ + } else { + printk(KERN_DEBUG "%s: BUG... transmitter died. Kicking it.\n", + dev->name); +#if 0 + netif_wake_queue(dev); +#endif + } +} + + +static void ace_tasklet(unsigned long arg) +{ + struct net_device *dev = (struct net_device *) arg; + struct ace_private *ap = netdev_priv(dev); + int cur_size; + + cur_size = atomic_read(&ap->cur_rx_bufs); + if ((cur_size < RX_LOW_STD_THRES) && + !test_and_set_bit(0, &ap->std_refill_busy)) { +#ifdef DEBUG + printk("refilling buffers (current %i)\n", cur_size); +#endif + ace_load_std_rx_ring(dev, RX_RING_SIZE - cur_size); + } + + if (ap->version >= 2) { + cur_size = atomic_read(&ap->cur_mini_bufs); + if ((cur_size < RX_LOW_MINI_THRES) && + !test_and_set_bit(0, &ap->mini_refill_busy)) { +#ifdef DEBUG + printk("refilling mini buffers (current %i)\n", + cur_size); +#endif + ace_load_mini_rx_ring(dev, RX_MINI_SIZE - cur_size); + } + } + + cur_size = atomic_read(&ap->cur_jumbo_bufs); + if (ap->jumbo && (cur_size < RX_LOW_JUMBO_THRES) && + !test_and_set_bit(0, &ap->jumbo_refill_busy)) { +#ifdef DEBUG + printk("refilling jumbo buffers (current %i)\n", cur_size); +#endif + ace_load_jumbo_rx_ring(dev, RX_JUMBO_SIZE - cur_size); + } + ap->tasklet_pending = 0; +} + + +/* + * Copy the contents of the NIC's trace buffer to kernel memory. + */ +static void ace_dump_trace(struct ace_private *ap) +{ +#if 0 + if (!ap->trace_buf) + if (!(ap->trace_buf = kmalloc(ACE_TRACE_SIZE, GFP_KERNEL))) + return; +#endif +} + + +/* + * Load the standard rx ring. + * + * Loading rings is safe without holding the spin lock since this is + * done only before the device is enabled, thus no interrupts are + * generated and by the interrupt handler/tasklet handler. + */ +static void ace_load_std_rx_ring(struct net_device *dev, int nr_bufs) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + short i, idx; + + + prefetchw(&ap->cur_rx_bufs); + + idx = ap->rx_std_skbprd; + + for (i = 0; i < nr_bufs; i++) { + struct sk_buff *skb; + struct rx_desc *rd; + dma_addr_t mapping; + + skb = netdev_alloc_skb_ip_align(dev, ACE_STD_BUFSIZE); + if (!skb) + break; + + mapping = pci_map_page(ap->pdev, virt_to_page(skb->data), + offset_in_page(skb->data), + ACE_STD_BUFSIZE, + PCI_DMA_FROMDEVICE); + ap->skb->rx_std_skbuff[idx].skb = skb; + dma_unmap_addr_set(&ap->skb->rx_std_skbuff[idx], + mapping, mapping); + + rd = &ap->rx_std_ring[idx]; + set_aceaddr(&rd->addr, mapping); + rd->size = ACE_STD_BUFSIZE; + rd->idx = idx; + idx = (idx + 1) % RX_STD_RING_ENTRIES; + } + + if (!i) + goto error_out; + + atomic_add(i, &ap->cur_rx_bufs); + ap->rx_std_skbprd = idx; + + if (ACE_IS_TIGON_I(ap)) { + struct cmd cmd; + cmd.evt = C_SET_RX_PRD_IDX; + cmd.code = 0; + cmd.idx = ap->rx_std_skbprd; + ace_issue_cmd(regs, &cmd); + } else { + writel(idx, ®s->RxStdPrd); + wmb(); + } + + out: + clear_bit(0, &ap->std_refill_busy); + return; + + error_out: + printk(KERN_INFO "Out of memory when allocating " + "standard receive buffers\n"); + goto out; +} + + +static void ace_load_mini_rx_ring(struct net_device *dev, int nr_bufs) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + short i, idx; + + prefetchw(&ap->cur_mini_bufs); + + idx = ap->rx_mini_skbprd; + for (i = 0; i < nr_bufs; i++) { + struct sk_buff *skb; + struct rx_desc *rd; + dma_addr_t mapping; + + skb = netdev_alloc_skb_ip_align(dev, ACE_MINI_BUFSIZE); + if (!skb) + break; + + mapping = pci_map_page(ap->pdev, virt_to_page(skb->data), + offset_in_page(skb->data), + ACE_MINI_BUFSIZE, + PCI_DMA_FROMDEVICE); + ap->skb->rx_mini_skbuff[idx].skb = skb; + dma_unmap_addr_set(&ap->skb->rx_mini_skbuff[idx], + mapping, mapping); + + rd = &ap->rx_mini_ring[idx]; + set_aceaddr(&rd->addr, mapping); + rd->size = ACE_MINI_BUFSIZE; + rd->idx = idx; + idx = (idx + 1) % RX_MINI_RING_ENTRIES; + } + + if (!i) + goto error_out; + + atomic_add(i, &ap->cur_mini_bufs); + + ap->rx_mini_skbprd = idx; + + writel(idx, ®s->RxMiniPrd); + wmb(); + + out: + clear_bit(0, &ap->mini_refill_busy); + return; + error_out: + printk(KERN_INFO "Out of memory when allocating " + "mini receive buffers\n"); + goto out; +} + + +/* + * Load the jumbo rx ring, this may happen at any time if the MTU + * is changed to a value > 1500. + */ +static void ace_load_jumbo_rx_ring(struct net_device *dev, int nr_bufs) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + short i, idx; + + idx = ap->rx_jumbo_skbprd; + + for (i = 0; i < nr_bufs; i++) { + struct sk_buff *skb; + struct rx_desc *rd; + dma_addr_t mapping; + + skb = netdev_alloc_skb_ip_align(dev, ACE_JUMBO_BUFSIZE); + if (!skb) + break; + + mapping = pci_map_page(ap->pdev, virt_to_page(skb->data), + offset_in_page(skb->data), + ACE_JUMBO_BUFSIZE, + PCI_DMA_FROMDEVICE); + ap->skb->rx_jumbo_skbuff[idx].skb = skb; + dma_unmap_addr_set(&ap->skb->rx_jumbo_skbuff[idx], + mapping, mapping); + + rd = &ap->rx_jumbo_ring[idx]; + set_aceaddr(&rd->addr, mapping); + rd->size = ACE_JUMBO_BUFSIZE; + rd->idx = idx; + idx = (idx + 1) % RX_JUMBO_RING_ENTRIES; + } + + if (!i) + goto error_out; + + atomic_add(i, &ap->cur_jumbo_bufs); + ap->rx_jumbo_skbprd = idx; + + if (ACE_IS_TIGON_I(ap)) { + struct cmd cmd; + cmd.evt = C_SET_RX_JUMBO_PRD_IDX; + cmd.code = 0; + cmd.idx = ap->rx_jumbo_skbprd; + ace_issue_cmd(regs, &cmd); + } else { + writel(idx, ®s->RxJumboPrd); + wmb(); + } + + out: + clear_bit(0, &ap->jumbo_refill_busy); + return; + error_out: + if (net_ratelimit()) + printk(KERN_INFO "Out of memory when allocating " + "jumbo receive buffers\n"); + goto out; +} + + +/* + * All events are considered to be slow (RX/TX ints do not generate + * events) and are handled here, outside the main interrupt handler, + * to reduce the size of the handler. + */ +static u32 ace_handle_event(struct net_device *dev, u32 evtcsm, u32 evtprd) +{ + struct ace_private *ap; + + ap = netdev_priv(dev); + + while (evtcsm != evtprd) { + switch (ap->evt_ring[evtcsm].evt) { + case E_FW_RUNNING: + printk(KERN_INFO "%s: Firmware up and running\n", + ap->name); + ap->fw_running = 1; + wmb(); + break; + case E_STATS_UPDATED: + break; + case E_LNK_STATE: + { + u16 code = ap->evt_ring[evtcsm].code; + switch (code) { + case E_C_LINK_UP: + { + u32 state = readl(&ap->regs->GigLnkState); + printk(KERN_WARNING "%s: Optical link UP " + "(%s Duplex, Flow Control: %s%s)\n", + ap->name, + state & LNK_FULL_DUPLEX ? "Full":"Half", + state & LNK_TX_FLOW_CTL_Y ? "TX " : "", + state & LNK_RX_FLOW_CTL_Y ? "RX" : ""); + break; + } + case E_C_LINK_DOWN: + printk(KERN_WARNING "%s: Optical link DOWN\n", + ap->name); + break; + case E_C_LINK_10_100: + printk(KERN_WARNING "%s: 10/100BaseT link " + "UP\n", ap->name); + break; + default: + printk(KERN_ERR "%s: Unknown optical link " + "state %02x\n", ap->name, code); + } + break; + } + case E_ERROR: + switch(ap->evt_ring[evtcsm].code) { + case E_C_ERR_INVAL_CMD: + printk(KERN_ERR "%s: invalid command error\n", + ap->name); + break; + case E_C_ERR_UNIMP_CMD: + printk(KERN_ERR "%s: unimplemented command " + "error\n", ap->name); + break; + case E_C_ERR_BAD_CFG: + printk(KERN_ERR "%s: bad config error\n", + ap->name); + break; + default: + printk(KERN_ERR "%s: unknown error %02x\n", + ap->name, ap->evt_ring[evtcsm].code); + } + break; + case E_RESET_JUMBO_RNG: + { + int i; + for (i = 0; i < RX_JUMBO_RING_ENTRIES; i++) { + if (ap->skb->rx_jumbo_skbuff[i].skb) { + ap->rx_jumbo_ring[i].size = 0; + set_aceaddr(&ap->rx_jumbo_ring[i].addr, 0); + dev_kfree_skb(ap->skb->rx_jumbo_skbuff[i].skb); + ap->skb->rx_jumbo_skbuff[i].skb = NULL; + } + } + + if (ACE_IS_TIGON_I(ap)) { + struct cmd cmd; + cmd.evt = C_SET_RX_JUMBO_PRD_IDX; + cmd.code = 0; + cmd.idx = 0; + ace_issue_cmd(ap->regs, &cmd); + } else { + writel(0, &((ap->regs)->RxJumboPrd)); + wmb(); + } + + ap->jumbo = 0; + ap->rx_jumbo_skbprd = 0; + printk(KERN_INFO "%s: Jumbo ring flushed\n", + ap->name); + clear_bit(0, &ap->jumbo_refill_busy); + break; + } + default: + printk(KERN_ERR "%s: Unhandled event 0x%02x\n", + ap->name, ap->evt_ring[evtcsm].evt); + } + evtcsm = (evtcsm + 1) % EVT_RING_ENTRIES; + } + + return evtcsm; +} + + +static void ace_rx_int(struct net_device *dev, u32 rxretprd, u32 rxretcsm) +{ + struct ace_private *ap = netdev_priv(dev); + u32 idx; + int mini_count = 0, std_count = 0; + + idx = rxretcsm; + + prefetchw(&ap->cur_rx_bufs); + prefetchw(&ap->cur_mini_bufs); + + while (idx != rxretprd) { + struct ring_info *rip; + struct sk_buff *skb; + struct rx_desc *rxdesc, *retdesc; + u32 skbidx; + int bd_flags, desc_type, mapsize; + u16 csum; + + + /* make sure the rx descriptor isn't read before rxretprd */ + if (idx == rxretcsm) + rmb(); + + retdesc = &ap->rx_return_ring[idx]; + skbidx = retdesc->idx; + bd_flags = retdesc->flags; + desc_type = bd_flags & (BD_FLG_JUMBO | BD_FLG_MINI); + + switch(desc_type) { + /* + * Normal frames do not have any flags set + * + * Mini and normal frames arrive frequently, + * so use a local counter to avoid doing + * atomic operations for each packet arriving. + */ + case 0: + rip = &ap->skb->rx_std_skbuff[skbidx]; + mapsize = ACE_STD_BUFSIZE; + rxdesc = &ap->rx_std_ring[skbidx]; + std_count++; + break; + case BD_FLG_JUMBO: + rip = &ap->skb->rx_jumbo_skbuff[skbidx]; + mapsize = ACE_JUMBO_BUFSIZE; + rxdesc = &ap->rx_jumbo_ring[skbidx]; + atomic_dec(&ap->cur_jumbo_bufs); + break; + case BD_FLG_MINI: + rip = &ap->skb->rx_mini_skbuff[skbidx]; + mapsize = ACE_MINI_BUFSIZE; + rxdesc = &ap->rx_mini_ring[skbidx]; + mini_count++; + break; + default: + printk(KERN_INFO "%s: unknown frame type (0x%02x) " + "returned by NIC\n", dev->name, + retdesc->flags); + goto error; + } + + skb = rip->skb; + rip->skb = NULL; + pci_unmap_page(ap->pdev, + dma_unmap_addr(rip, mapping), + mapsize, + PCI_DMA_FROMDEVICE); + skb_put(skb, retdesc->size); + + /* + * Fly baby, fly! + */ + csum = retdesc->tcp_udp_csum; + + skb->protocol = eth_type_trans(skb, dev); + + /* + * Instead of forcing the poor tigon mips cpu to calculate + * pseudo hdr checksum, we do this ourselves. + */ + if (bd_flags & BD_FLG_TCP_UDP_SUM) { + skb->csum = htons(csum); + skb->ip_summed = CHECKSUM_COMPLETE; + } else { + skb_checksum_none_assert(skb); + } + + /* send it up */ + if ((bd_flags & BD_FLG_VLAN_TAG)) + __vlan_hwaccel_put_tag(skb, retdesc->vlan); + netif_rx(skb); + + dev->stats.rx_packets++; + dev->stats.rx_bytes += retdesc->size; + + idx = (idx + 1) % RX_RETURN_RING_ENTRIES; + } + + atomic_sub(std_count, &ap->cur_rx_bufs); + if (!ACE_IS_TIGON_I(ap)) + atomic_sub(mini_count, &ap->cur_mini_bufs); + + out: + /* + * According to the documentation RxRetCsm is obsolete with + * the 12.3.x Firmware - my Tigon I NICs seem to disagree! + */ + if (ACE_IS_TIGON_I(ap)) { + writel(idx, &ap->regs->RxRetCsm); + } + ap->cur_rx = idx; + + return; + error: + idx = rxretprd; + goto out; +} + + +static inline void ace_tx_int(struct net_device *dev, + u32 txcsm, u32 idx) +{ + struct ace_private *ap = netdev_priv(dev); + + do { + struct sk_buff *skb; + struct tx_ring_info *info; + + info = ap->skb->tx_skbuff + idx; + skb = info->skb; + + if (dma_unmap_len(info, maplen)) { + pci_unmap_page(ap->pdev, dma_unmap_addr(info, mapping), + dma_unmap_len(info, maplen), + PCI_DMA_TODEVICE); + dma_unmap_len_set(info, maplen, 0); + } + + if (skb) { + dev->stats.tx_packets++; + dev->stats.tx_bytes += skb->len; + dev_kfree_skb_irq(skb); + info->skb = NULL; + } + + idx = (idx + 1) % ACE_TX_RING_ENTRIES(ap); + } while (idx != txcsm); + + if (netif_queue_stopped(dev)) + netif_wake_queue(dev); + + wmb(); + ap->tx_ret_csm = txcsm; + + /* So... tx_ret_csm is advanced _after_ check for device wakeup. + * + * We could try to make it before. In this case we would get + * the following race condition: hard_start_xmit on other cpu + * enters after we advanced tx_ret_csm and fills space, + * which we have just freed, so that we make illegal device wakeup. + * There is no good way to workaround this (at entry + * to ace_start_xmit detects this condition and prevents + * ring corruption, but it is not a good workaround.) + * + * When tx_ret_csm is advanced after, we wake up device _only_ + * if we really have some space in ring (though the core doing + * hard_start_xmit can see full ring for some period and has to + * synchronize.) Superb. + * BUT! We get another subtle race condition. hard_start_xmit + * may think that ring is full between wakeup and advancing + * tx_ret_csm and will stop device instantly! It is not so bad. + * We are guaranteed that there is something in ring, so that + * the next irq will resume transmission. To speedup this we could + * mark descriptor, which closes ring with BD_FLG_COAL_NOW + * (see ace_start_xmit). + * + * Well, this dilemma exists in all lock-free devices. + * We, following scheme used in drivers by Donald Becker, + * select the least dangerous. + * --ANK + */ +} + + +static irqreturn_t ace_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + u32 idx; + u32 txcsm, rxretcsm, rxretprd; + u32 evtcsm, evtprd; + + /* + * In case of PCI shared interrupts or spurious interrupts, + * we want to make sure it is actually our interrupt before + * spending any time in here. + */ + if (!(readl(®s->HostCtrl) & IN_INT)) + return IRQ_NONE; + + /* + * ACK intr now. Otherwise we will lose updates to rx_ret_prd, + * which happened _after_ rxretprd = *ap->rx_ret_prd; but before + * writel(0, ®s->Mb0Lo). + * + * "IRQ avoidance" recommended in docs applies to IRQs served + * threads and it is wrong even for that case. + */ + writel(0, ®s->Mb0Lo); + readl(®s->Mb0Lo); + + /* + * There is no conflict between transmit handling in + * start_xmit and receive processing, thus there is no reason + * to take a spin lock for RX handling. Wait until we start + * working on the other stuff - hey we don't need a spin lock + * anymore. + */ + rxretprd = *ap->rx_ret_prd; + rxretcsm = ap->cur_rx; + + if (rxretprd != rxretcsm) + ace_rx_int(dev, rxretprd, rxretcsm); + + txcsm = *ap->tx_csm; + idx = ap->tx_ret_csm; + + if (txcsm != idx) { + /* + * If each skb takes only one descriptor this check degenerates + * to identity, because new space has just been opened. + * But if skbs are fragmented we must check that this index + * update releases enough of space, otherwise we just + * wait for device to make more work. + */ + if (!tx_ring_full(ap, txcsm, ap->tx_prd)) + ace_tx_int(dev, txcsm, idx); + } + + evtcsm = readl(®s->EvtCsm); + evtprd = *ap->evt_prd; + + if (evtcsm != evtprd) { + evtcsm = ace_handle_event(dev, evtcsm, evtprd); + writel(evtcsm, ®s->EvtCsm); + } + + /* + * This has to go last in the interrupt handler and run with + * the spin lock released ... what lock? + */ + if (netif_running(dev)) { + int cur_size; + int run_tasklet = 0; + + cur_size = atomic_read(&ap->cur_rx_bufs); + if (cur_size < RX_LOW_STD_THRES) { + if ((cur_size < RX_PANIC_STD_THRES) && + !test_and_set_bit(0, &ap->std_refill_busy)) { +#ifdef DEBUG + printk("low on std buffers %i\n", cur_size); +#endif + ace_load_std_rx_ring(dev, + RX_RING_SIZE - cur_size); + } else + run_tasklet = 1; + } + + if (!ACE_IS_TIGON_I(ap)) { + cur_size = atomic_read(&ap->cur_mini_bufs); + if (cur_size < RX_LOW_MINI_THRES) { + if ((cur_size < RX_PANIC_MINI_THRES) && + !test_and_set_bit(0, + &ap->mini_refill_busy)) { +#ifdef DEBUG + printk("low on mini buffers %i\n", + cur_size); +#endif + ace_load_mini_rx_ring(dev, + RX_MINI_SIZE - cur_size); + } else + run_tasklet = 1; + } + } + + if (ap->jumbo) { + cur_size = atomic_read(&ap->cur_jumbo_bufs); + if (cur_size < RX_LOW_JUMBO_THRES) { + if ((cur_size < RX_PANIC_JUMBO_THRES) && + !test_and_set_bit(0, + &ap->jumbo_refill_busy)){ +#ifdef DEBUG + printk("low on jumbo buffers %i\n", + cur_size); +#endif + ace_load_jumbo_rx_ring(dev, + RX_JUMBO_SIZE - cur_size); + } else + run_tasklet = 1; + } + } + if (run_tasklet && !ap->tasklet_pending) { + ap->tasklet_pending = 1; + tasklet_schedule(&ap->ace_tasklet); + } + } + + return IRQ_HANDLED; +} + +static int ace_open(struct net_device *dev) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + struct cmd cmd; + + if (!(ap->fw_running)) { + printk(KERN_WARNING "%s: Firmware not running!\n", dev->name); + return -EBUSY; + } + + writel(dev->mtu + ETH_HLEN + 4, ®s->IfMtu); + + cmd.evt = C_CLEAR_STATS; + cmd.code = 0; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + + cmd.evt = C_HOST_STATE; + cmd.code = C_C_STACK_UP; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + + if (ap->jumbo && + !test_and_set_bit(0, &ap->jumbo_refill_busy)) + ace_load_jumbo_rx_ring(dev, RX_JUMBO_SIZE); + + if (dev->flags & IFF_PROMISC) { + cmd.evt = C_SET_PROMISC_MODE; + cmd.code = C_C_PROMISC_ENABLE; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + + ap->promisc = 1; + }else + ap->promisc = 0; + ap->mcast_all = 0; + +#if 0 + cmd.evt = C_LNK_NEGOTIATION; + cmd.code = 0; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); +#endif + + netif_start_queue(dev); + + /* + * Setup the bottom half rx ring refill handler + */ + tasklet_init(&ap->ace_tasklet, ace_tasklet, (unsigned long)dev); + return 0; +} + + +static int ace_close(struct net_device *dev) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + struct cmd cmd; + unsigned long flags; + short i; + + /* + * Without (or before) releasing irq and stopping hardware, this + * is an absolute non-sense, by the way. It will be reset instantly + * by the first irq. + */ + netif_stop_queue(dev); + + + if (ap->promisc) { + cmd.evt = C_SET_PROMISC_MODE; + cmd.code = C_C_PROMISC_DISABLE; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + ap->promisc = 0; + } + + cmd.evt = C_HOST_STATE; + cmd.code = C_C_STACK_DOWN; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + + tasklet_kill(&ap->ace_tasklet); + + /* + * Make sure one CPU is not processing packets while + * buffers are being released by another. + */ + + local_irq_save(flags); + ace_mask_irq(dev); + + for (i = 0; i < ACE_TX_RING_ENTRIES(ap); i++) { + struct sk_buff *skb; + struct tx_ring_info *info; + + info = ap->skb->tx_skbuff + i; + skb = info->skb; + + if (dma_unmap_len(info, maplen)) { + if (ACE_IS_TIGON_I(ap)) { + /* NB: TIGON_1 is special, tx_ring is in io space */ + struct tx_desc __iomem *tx; + tx = (__force struct tx_desc __iomem *) &ap->tx_ring[i]; + writel(0, &tx->addr.addrhi); + writel(0, &tx->addr.addrlo); + writel(0, &tx->flagsize); + } else + memset(ap->tx_ring + i, 0, + sizeof(struct tx_desc)); + pci_unmap_page(ap->pdev, dma_unmap_addr(info, mapping), + dma_unmap_len(info, maplen), + PCI_DMA_TODEVICE); + dma_unmap_len_set(info, maplen, 0); + } + if (skb) { + dev_kfree_skb(skb); + info->skb = NULL; + } + } + + if (ap->jumbo) { + cmd.evt = C_RESET_JUMBO_RNG; + cmd.code = 0; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + } + + ace_unmask_irq(dev); + local_irq_restore(flags); + + return 0; +} + + +static inline dma_addr_t +ace_map_tx_skb(struct ace_private *ap, struct sk_buff *skb, + struct sk_buff *tail, u32 idx) +{ + dma_addr_t mapping; + struct tx_ring_info *info; + + mapping = pci_map_page(ap->pdev, virt_to_page(skb->data), + offset_in_page(skb->data), + skb->len, PCI_DMA_TODEVICE); + + info = ap->skb->tx_skbuff + idx; + info->skb = tail; + dma_unmap_addr_set(info, mapping, mapping); + dma_unmap_len_set(info, maplen, skb->len); + return mapping; +} + + +static inline void +ace_load_tx_bd(struct ace_private *ap, struct tx_desc *desc, u64 addr, + u32 flagsize, u32 vlan_tag) +{ +#if !USE_TX_COAL_NOW + flagsize &= ~BD_FLG_COAL_NOW; +#endif + + if (ACE_IS_TIGON_I(ap)) { + struct tx_desc __iomem *io = (__force struct tx_desc __iomem *) desc; + writel(addr >> 32, &io->addr.addrhi); + writel(addr & 0xffffffff, &io->addr.addrlo); + writel(flagsize, &io->flagsize); + writel(vlan_tag, &io->vlanres); + } else { + desc->addr.addrhi = addr >> 32; + desc->addr.addrlo = addr; + desc->flagsize = flagsize; + desc->vlanres = vlan_tag; + } +} + + +static netdev_tx_t ace_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + struct tx_desc *desc; + u32 idx, flagsize; + unsigned long maxjiff = jiffies + 3*HZ; + +restart: + idx = ap->tx_prd; + + if (tx_ring_full(ap, ap->tx_ret_csm, idx)) + goto overflow; + + if (!skb_shinfo(skb)->nr_frags) { + dma_addr_t mapping; + u32 vlan_tag = 0; + + mapping = ace_map_tx_skb(ap, skb, skb, idx); + flagsize = (skb->len << 16) | (BD_FLG_END); + if (skb->ip_summed == CHECKSUM_PARTIAL) + flagsize |= BD_FLG_TCP_UDP_SUM; + if (vlan_tx_tag_present(skb)) { + flagsize |= BD_FLG_VLAN_TAG; + vlan_tag = vlan_tx_tag_get(skb); + } + desc = ap->tx_ring + idx; + idx = (idx + 1) % ACE_TX_RING_ENTRIES(ap); + + /* Look at ace_tx_int for explanations. */ + if (tx_ring_full(ap, ap->tx_ret_csm, idx)) + flagsize |= BD_FLG_COAL_NOW; + + ace_load_tx_bd(ap, desc, mapping, flagsize, vlan_tag); + } else { + dma_addr_t mapping; + u32 vlan_tag = 0; + int i, len = 0; + + mapping = ace_map_tx_skb(ap, skb, NULL, idx); + flagsize = (skb_headlen(skb) << 16); + if (skb->ip_summed == CHECKSUM_PARTIAL) + flagsize |= BD_FLG_TCP_UDP_SUM; + if (vlan_tx_tag_present(skb)) { + flagsize |= BD_FLG_VLAN_TAG; + vlan_tag = vlan_tx_tag_get(skb); + } + + ace_load_tx_bd(ap, ap->tx_ring + idx, mapping, flagsize, vlan_tag); + + idx = (idx + 1) % ACE_TX_RING_ENTRIES(ap); + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + struct tx_ring_info *info; + + len += frag->size; + info = ap->skb->tx_skbuff + idx; + desc = ap->tx_ring + idx; + + mapping = pci_map_page(ap->pdev, frag->page, + frag->page_offset, frag->size, + PCI_DMA_TODEVICE); + + flagsize = (frag->size << 16); + if (skb->ip_summed == CHECKSUM_PARTIAL) + flagsize |= BD_FLG_TCP_UDP_SUM; + idx = (idx + 1) % ACE_TX_RING_ENTRIES(ap); + + if (i == skb_shinfo(skb)->nr_frags - 1) { + flagsize |= BD_FLG_END; + if (tx_ring_full(ap, ap->tx_ret_csm, idx)) + flagsize |= BD_FLG_COAL_NOW; + + /* + * Only the last fragment frees + * the skb! + */ + info->skb = skb; + } else { + info->skb = NULL; + } + dma_unmap_addr_set(info, mapping, mapping); + dma_unmap_len_set(info, maplen, frag->size); + ace_load_tx_bd(ap, desc, mapping, flagsize, vlan_tag); + } + } + + wmb(); + ap->tx_prd = idx; + ace_set_txprd(regs, ap, idx); + + if (flagsize & BD_FLG_COAL_NOW) { + netif_stop_queue(dev); + + /* + * A TX-descriptor producer (an IRQ) might have gotten + * between, making the ring free again. Since xmit is + * serialized, this is the only situation we have to + * re-test. + */ + if (!tx_ring_full(ap, ap->tx_ret_csm, idx)) + netif_wake_queue(dev); + } + + return NETDEV_TX_OK; + +overflow: + /* + * This race condition is unavoidable with lock-free drivers. + * We wake up the queue _before_ tx_prd is advanced, so that we can + * enter hard_start_xmit too early, while tx ring still looks closed. + * This happens ~1-4 times per 100000 packets, so that we can allow + * to loop syncing to other CPU. Probably, we need an additional + * wmb() in ace_tx_intr as well. + * + * Note that this race is relieved by reserving one more entry + * in tx ring than it is necessary (see original non-SG driver). + * However, with SG we need to reserve 2*MAX_SKB_FRAGS+1, which + * is already overkill. + * + * Alternative is to return with 1 not throttling queue. In this + * case loop becomes longer, no more useful effects. + */ + if (time_before(jiffies, maxjiff)) { + barrier(); + cpu_relax(); + goto restart; + } + + /* The ring is stuck full. */ + printk(KERN_WARNING "%s: Transmit ring stuck full\n", dev->name); + return NETDEV_TX_BUSY; +} + + +static int ace_change_mtu(struct net_device *dev, int new_mtu) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + + if (new_mtu > ACE_JUMBO_MTU) + return -EINVAL; + + writel(new_mtu + ETH_HLEN + 4, ®s->IfMtu); + dev->mtu = new_mtu; + + if (new_mtu > ACE_STD_MTU) { + if (!(ap->jumbo)) { + printk(KERN_INFO "%s: Enabling Jumbo frame " + "support\n", dev->name); + ap->jumbo = 1; + if (!test_and_set_bit(0, &ap->jumbo_refill_busy)) + ace_load_jumbo_rx_ring(dev, RX_JUMBO_SIZE); + ace_set_rxtx_parms(dev, 1); + } + } else { + while (test_and_set_bit(0, &ap->jumbo_refill_busy)); + ace_sync_irq(dev->irq); + ace_set_rxtx_parms(dev, 0); + if (ap->jumbo) { + struct cmd cmd; + + cmd.evt = C_RESET_JUMBO_RNG; + cmd.code = 0; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + } + } + + return 0; +} + +static int ace_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + u32 link; + + memset(ecmd, 0, sizeof(struct ethtool_cmd)); + ecmd->supported = + (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg | SUPPORTED_FIBRE); + + ecmd->port = PORT_FIBRE; + ecmd->transceiver = XCVR_INTERNAL; + + link = readl(®s->GigLnkState); + if (link & LNK_1000MB) + ethtool_cmd_speed_set(ecmd, SPEED_1000); + else { + link = readl(®s->FastLnkState); + if (link & LNK_100MB) + ethtool_cmd_speed_set(ecmd, SPEED_100); + else if (link & LNK_10MB) + ethtool_cmd_speed_set(ecmd, SPEED_10); + else + ethtool_cmd_speed_set(ecmd, 0); + } + if (link & LNK_FULL_DUPLEX) + ecmd->duplex = DUPLEX_FULL; + else + ecmd->duplex = DUPLEX_HALF; + + if (link & LNK_NEGOTIATE) + ecmd->autoneg = AUTONEG_ENABLE; + else + ecmd->autoneg = AUTONEG_DISABLE; + +#if 0 + /* + * Current struct ethtool_cmd is insufficient + */ + ecmd->trace = readl(®s->TuneTrace); + + ecmd->txcoal = readl(®s->TuneTxCoalTicks); + ecmd->rxcoal = readl(®s->TuneRxCoalTicks); +#endif + ecmd->maxtxpkt = readl(®s->TuneMaxTxDesc); + ecmd->maxrxpkt = readl(®s->TuneMaxRxDesc); + + return 0; +} + +static int ace_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + u32 link, speed; + + link = readl(®s->GigLnkState); + if (link & LNK_1000MB) + speed = SPEED_1000; + else { + link = readl(®s->FastLnkState); + if (link & LNK_100MB) + speed = SPEED_100; + else if (link & LNK_10MB) + speed = SPEED_10; + else + speed = SPEED_100; + } + + link = LNK_ENABLE | LNK_1000MB | LNK_100MB | LNK_10MB | + LNK_RX_FLOW_CTL_Y | LNK_NEG_FCTL; + if (!ACE_IS_TIGON_I(ap)) + link |= LNK_TX_FLOW_CTL_Y; + if (ecmd->autoneg == AUTONEG_ENABLE) + link |= LNK_NEGOTIATE; + if (ethtool_cmd_speed(ecmd) != speed) { + link &= ~(LNK_1000MB | LNK_100MB | LNK_10MB); + switch (ethtool_cmd_speed(ecmd)) { + case SPEED_1000: + link |= LNK_1000MB; + break; + case SPEED_100: + link |= LNK_100MB; + break; + case SPEED_10: + link |= LNK_10MB; + break; + } + } + + if (ecmd->duplex == DUPLEX_FULL) + link |= LNK_FULL_DUPLEX; + + if (link != ap->link) { + struct cmd cmd; + printk(KERN_INFO "%s: Renegotiating link state\n", + dev->name); + + ap->link = link; + writel(link, ®s->TuneLink); + if (!ACE_IS_TIGON_I(ap)) + writel(link, ®s->TuneFastLink); + wmb(); + + cmd.evt = C_LNK_NEGOTIATION; + cmd.code = 0; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + } + return 0; +} + +static void ace_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct ace_private *ap = netdev_priv(dev); + + strlcpy(info->driver, "acenic", sizeof(info->driver)); + snprintf(info->version, sizeof(info->version), "%i.%i.%i", + ap->firmware_major, ap->firmware_minor, + ap->firmware_fix); + + if (ap->pdev) + strlcpy(info->bus_info, pci_name(ap->pdev), + sizeof(info->bus_info)); + +} + +/* + * Set the hardware MAC address. + */ +static int ace_set_mac_addr(struct net_device *dev, void *p) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + struct sockaddr *addr=p; + u8 *da; + struct cmd cmd; + + if(netif_running(dev)) + return -EBUSY; + + memcpy(dev->dev_addr, addr->sa_data,dev->addr_len); + + da = (u8 *)dev->dev_addr; + + writel(da[0] << 8 | da[1], ®s->MacAddrHi); + writel((da[2] << 24) | (da[3] << 16) | (da[4] << 8) | da[5], + ®s->MacAddrLo); + + cmd.evt = C_SET_MAC_ADDR; + cmd.code = 0; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + + return 0; +} + + +static void ace_set_multicast_list(struct net_device *dev) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + struct cmd cmd; + + if ((dev->flags & IFF_ALLMULTI) && !(ap->mcast_all)) { + cmd.evt = C_SET_MULTICAST_MODE; + cmd.code = C_C_MCAST_ENABLE; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + ap->mcast_all = 1; + } else if (ap->mcast_all) { + cmd.evt = C_SET_MULTICAST_MODE; + cmd.code = C_C_MCAST_DISABLE; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + ap->mcast_all = 0; + } + + if ((dev->flags & IFF_PROMISC) && !(ap->promisc)) { + cmd.evt = C_SET_PROMISC_MODE; + cmd.code = C_C_PROMISC_ENABLE; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + ap->promisc = 1; + }else if (!(dev->flags & IFF_PROMISC) && (ap->promisc)) { + cmd.evt = C_SET_PROMISC_MODE; + cmd.code = C_C_PROMISC_DISABLE; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + ap->promisc = 0; + } + + /* + * For the time being multicast relies on the upper layers + * filtering it properly. The Firmware does not allow one to + * set the entire multicast list at a time and keeping track of + * it here is going to be messy. + */ + if (!netdev_mc_empty(dev) && !ap->mcast_all) { + cmd.evt = C_SET_MULTICAST_MODE; + cmd.code = C_C_MCAST_ENABLE; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + }else if (!ap->mcast_all) { + cmd.evt = C_SET_MULTICAST_MODE; + cmd.code = C_C_MCAST_DISABLE; + cmd.idx = 0; + ace_issue_cmd(regs, &cmd); + } +} + + +static struct net_device_stats *ace_get_stats(struct net_device *dev) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_mac_stats __iomem *mac_stats = + (struct ace_mac_stats __iomem *)ap->regs->Stats; + + dev->stats.rx_missed_errors = readl(&mac_stats->drop_space); + dev->stats.multicast = readl(&mac_stats->kept_mc); + dev->stats.collisions = readl(&mac_stats->coll); + + return &dev->stats; +} + + +static void __devinit ace_copy(struct ace_regs __iomem *regs, const __be32 *src, + u32 dest, int size) +{ + void __iomem *tdest; + short tsize, i; + + if (size <= 0) + return; + + while (size > 0) { + tsize = min_t(u32, ((~dest & (ACE_WINDOW_SIZE - 1)) + 1), + min_t(u32, size, ACE_WINDOW_SIZE)); + tdest = (void __iomem *) ®s->Window + + (dest & (ACE_WINDOW_SIZE - 1)); + writel(dest & ~(ACE_WINDOW_SIZE - 1), ®s->WinBase); + for (i = 0; i < (tsize / 4); i++) { + /* Firmware is big-endian */ + writel(be32_to_cpup(src), tdest); + src++; + tdest += 4; + dest += 4; + size -= 4; + } + } +} + + +static void __devinit ace_clear(struct ace_regs __iomem *regs, u32 dest, int size) +{ + void __iomem *tdest; + short tsize = 0, i; + + if (size <= 0) + return; + + while (size > 0) { + tsize = min_t(u32, ((~dest & (ACE_WINDOW_SIZE - 1)) + 1), + min_t(u32, size, ACE_WINDOW_SIZE)); + tdest = (void __iomem *) ®s->Window + + (dest & (ACE_WINDOW_SIZE - 1)); + writel(dest & ~(ACE_WINDOW_SIZE - 1), ®s->WinBase); + + for (i = 0; i < (tsize / 4); i++) { + writel(0, tdest + i*4); + } + + dest += tsize; + size -= tsize; + } +} + + +/* + * Download the firmware into the SRAM on the NIC + * + * This operation requires the NIC to be halted and is performed with + * interrupts disabled and with the spinlock hold. + */ +static int __devinit ace_load_firmware(struct net_device *dev) +{ + const struct firmware *fw; + const char *fw_name = "acenic/tg2.bin"; + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + const __be32 *fw_data; + u32 load_addr; + int ret; + + if (!(readl(®s->CpuCtrl) & CPU_HALTED)) { + printk(KERN_ERR "%s: trying to download firmware while the " + "CPU is running!\n", ap->name); + return -EFAULT; + } + + if (ACE_IS_TIGON_I(ap)) + fw_name = "acenic/tg1.bin"; + + ret = request_firmware(&fw, fw_name, &ap->pdev->dev); + if (ret) { + printk(KERN_ERR "%s: Failed to load firmware \"%s\"\n", + ap->name, fw_name); + return ret; + } + + fw_data = (void *)fw->data; + + /* Firmware blob starts with version numbers, followed by + load and start address. Remainder is the blob to be loaded + contiguously from load address. We don't bother to represent + the BSS/SBSS sections any more, since we were clearing the + whole thing anyway. */ + ap->firmware_major = fw->data[0]; + ap->firmware_minor = fw->data[1]; + ap->firmware_fix = fw->data[2]; + + ap->firmware_start = be32_to_cpu(fw_data[1]); + if (ap->firmware_start < 0x4000 || ap->firmware_start >= 0x80000) { + printk(KERN_ERR "%s: bogus load address %08x in \"%s\"\n", + ap->name, ap->firmware_start, fw_name); + ret = -EINVAL; + goto out; + } + + load_addr = be32_to_cpu(fw_data[2]); + if (load_addr < 0x4000 || load_addr >= 0x80000) { + printk(KERN_ERR "%s: bogus load address %08x in \"%s\"\n", + ap->name, load_addr, fw_name); + ret = -EINVAL; + goto out; + } + + /* + * Do not try to clear more than 512KiB or we end up seeing + * funny things on NICs with only 512KiB SRAM + */ + ace_clear(regs, 0x2000, 0x80000-0x2000); + ace_copy(regs, &fw_data[3], load_addr, fw->size-12); + out: + release_firmware(fw); + return ret; +} + + +/* + * The eeprom on the AceNIC is an Atmel i2c EEPROM. + * + * Accessing the EEPROM is `interesting' to say the least - don't read + * this code right after dinner. + * + * This is all about black magic and bit-banging the device .... I + * wonder in what hospital they have put the guy who designed the i2c + * specs. + * + * Oh yes, this is only the beginning! + * + * Thanks to Stevarino Webinski for helping tracking down the bugs in the + * code i2c readout code by beta testing all my hacks. + */ +static void __devinit eeprom_start(struct ace_regs __iomem *regs) +{ + u32 local; + + readl(®s->LocalCtrl); + udelay(ACE_SHORT_DELAY); + local = readl(®s->LocalCtrl); + local |= EEPROM_DATA_OUT | EEPROM_WRITE_ENABLE; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + local |= EEPROM_CLK_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + local &= ~EEPROM_DATA_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + local &= ~EEPROM_CLK_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); +} + + +static void __devinit eeprom_prep(struct ace_regs __iomem *regs, u8 magic) +{ + short i; + u32 local; + + udelay(ACE_SHORT_DELAY); + local = readl(®s->LocalCtrl); + local &= ~EEPROM_DATA_OUT; + local |= EEPROM_WRITE_ENABLE; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + + for (i = 0; i < 8; i++, magic <<= 1) { + udelay(ACE_SHORT_DELAY); + if (magic & 0x80) + local |= EEPROM_DATA_OUT; + else + local &= ~EEPROM_DATA_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + + udelay(ACE_SHORT_DELAY); + local |= EEPROM_CLK_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + local &= ~(EEPROM_CLK_OUT | EEPROM_DATA_OUT); + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + } +} + + +static int __devinit eeprom_check_ack(struct ace_regs __iomem *regs) +{ + int state; + u32 local; + + local = readl(®s->LocalCtrl); + local &= ~EEPROM_WRITE_ENABLE; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_LONG_DELAY); + local |= EEPROM_CLK_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + /* sample data in middle of high clk */ + state = (readl(®s->LocalCtrl) & EEPROM_DATA_IN) != 0; + udelay(ACE_SHORT_DELAY); + mb(); + writel(readl(®s->LocalCtrl) & ~EEPROM_CLK_OUT, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + + return state; +} + + +static void __devinit eeprom_stop(struct ace_regs __iomem *regs) +{ + u32 local; + + udelay(ACE_SHORT_DELAY); + local = readl(®s->LocalCtrl); + local |= EEPROM_WRITE_ENABLE; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + local &= ~EEPROM_DATA_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + local |= EEPROM_CLK_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + local |= EEPROM_DATA_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_LONG_DELAY); + local &= ~EEPROM_CLK_OUT; + writel(local, ®s->LocalCtrl); + mb(); +} + + +/* + * Read a whole byte from the EEPROM. + */ +static int __devinit read_eeprom_byte(struct net_device *dev, + unsigned long offset) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + unsigned long flags; + u32 local; + int result = 0; + short i; + + /* + * Don't take interrupts on this CPU will bit banging + * the %#%#@$ I2C device + */ + local_irq_save(flags); + + eeprom_start(regs); + + eeprom_prep(regs, EEPROM_WRITE_SELECT); + if (eeprom_check_ack(regs)) { + local_irq_restore(flags); + printk(KERN_ERR "%s: Unable to sync eeprom\n", ap->name); + result = -EIO; + goto eeprom_read_error; + } + + eeprom_prep(regs, (offset >> 8) & 0xff); + if (eeprom_check_ack(regs)) { + local_irq_restore(flags); + printk(KERN_ERR "%s: Unable to set address byte 0\n", + ap->name); + result = -EIO; + goto eeprom_read_error; + } + + eeprom_prep(regs, offset & 0xff); + if (eeprom_check_ack(regs)) { + local_irq_restore(flags); + printk(KERN_ERR "%s: Unable to set address byte 1\n", + ap->name); + result = -EIO; + goto eeprom_read_error; + } + + eeprom_start(regs); + eeprom_prep(regs, EEPROM_READ_SELECT); + if (eeprom_check_ack(regs)) { + local_irq_restore(flags); + printk(KERN_ERR "%s: Unable to set READ_SELECT\n", + ap->name); + result = -EIO; + goto eeprom_read_error; + } + + for (i = 0; i < 8; i++) { + local = readl(®s->LocalCtrl); + local &= ~EEPROM_WRITE_ENABLE; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + udelay(ACE_LONG_DELAY); + mb(); + local |= EEPROM_CLK_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + /* sample data mid high clk */ + result = (result << 1) | + ((readl(®s->LocalCtrl) & EEPROM_DATA_IN) != 0); + udelay(ACE_SHORT_DELAY); + mb(); + local = readl(®s->LocalCtrl); + local &= ~EEPROM_CLK_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + udelay(ACE_SHORT_DELAY); + mb(); + if (i == 7) { + local |= EEPROM_WRITE_ENABLE; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + } + } + + local |= EEPROM_DATA_OUT; + writel(local, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + writel(readl(®s->LocalCtrl) | EEPROM_CLK_OUT, ®s->LocalCtrl); + readl(®s->LocalCtrl); + udelay(ACE_LONG_DELAY); + writel(readl(®s->LocalCtrl) & ~EEPROM_CLK_OUT, ®s->LocalCtrl); + readl(®s->LocalCtrl); + mb(); + udelay(ACE_SHORT_DELAY); + eeprom_stop(regs); + + local_irq_restore(flags); + out: + return result; + + eeprom_read_error: + printk(KERN_ERR "%s: Unable to read eeprom byte 0x%02lx\n", + ap->name, offset); + goto out; +} diff --git a/drivers/net/ethernet/3com/acenic.h b/drivers/net/ethernet/3com/acenic.h new file mode 100644 index 000000000000..51c486cfbb8c --- /dev/null +++ b/drivers/net/ethernet/3com/acenic.h @@ -0,0 +1,790 @@ +#ifndef _ACENIC_H_ +#define _ACENIC_H_ +#include <linux/interrupt.h> + + +/* + * Generate TX index update each time, when TX ring is closed. + * Normally, this is not useful, because results in more dma (and irqs + * without TX_COAL_INTS_ONLY). + */ +#define USE_TX_COAL_NOW 0 + +/* + * Addressing: + * + * The Tigon uses 64-bit host addresses, regardless of their actual + * length, and it expects a big-endian format. For 32 bit systems the + * upper 32 bits of the address are simply ignored (zero), however for + * little endian 64 bit systems (Alpha) this looks strange with the + * two parts of the address word being swapped. + * + * The addresses are split in two 32 bit words for all architectures + * as some of them are in PCI shared memory and it is necessary to use + * readl/writel to access them. + * + * The addressing code is derived from Pete Wyckoff's work, but + * modified to deal properly with readl/writel usage. + */ + +struct ace_regs { + u32 pad0[16]; /* PCI control registers */ + + u32 HostCtrl; /* 0x40 */ + u32 LocalCtrl; + + u32 pad1[2]; + + u32 MiscCfg; /* 0x50 */ + + u32 pad2[2]; + + u32 PciState; + + u32 pad3[2]; /* 0x60 */ + + u32 WinBase; + u32 WinData; + + u32 pad4[12]; /* 0x70 */ + + u32 DmaWriteState; /* 0xa0 */ + u32 pad5[3]; + u32 DmaReadState; /* 0xb0 */ + + u32 pad6[26]; + + u32 AssistState; + + u32 pad7[8]; /* 0x120 */ + + u32 CpuCtrl; /* 0x140 */ + u32 Pc; + + u32 pad8[3]; + + u32 SramAddr; /* 0x154 */ + u32 SramData; + + u32 pad9[49]; + + u32 MacRxState; /* 0x220 */ + + u32 pad10[7]; + + u32 CpuBCtrl; /* 0x240 */ + u32 PcB; + + u32 pad11[3]; + + u32 SramBAddr; /* 0x254 */ + u32 SramBData; + + u32 pad12[105]; + + u32 pad13[32]; /* 0x400 */ + u32 Stats[32]; + + u32 Mb0Hi; /* 0x500 */ + u32 Mb0Lo; + u32 Mb1Hi; + u32 CmdPrd; + u32 Mb2Hi; + u32 TxPrd; + u32 Mb3Hi; + u32 RxStdPrd; + u32 Mb4Hi; + u32 RxJumboPrd; + u32 Mb5Hi; + u32 RxMiniPrd; + u32 Mb6Hi; + u32 Mb6Lo; + u32 Mb7Hi; + u32 Mb7Lo; + u32 Mb8Hi; + u32 Mb8Lo; + u32 Mb9Hi; + u32 Mb9Lo; + u32 MbAHi; + u32 MbALo; + u32 MbBHi; + u32 MbBLo; + u32 MbCHi; + u32 MbCLo; + u32 MbDHi; + u32 MbDLo; + u32 MbEHi; + u32 MbELo; + u32 MbFHi; + u32 MbFLo; + + u32 pad14[32]; + + u32 MacAddrHi; /* 0x600 */ + u32 MacAddrLo; + u32 InfoPtrHi; + u32 InfoPtrLo; + u32 MultiCastHi; /* 0x610 */ + u32 MultiCastLo; + u32 ModeStat; + u32 DmaReadCfg; + u32 DmaWriteCfg; /* 0x620 */ + u32 TxBufRat; + u32 EvtCsm; + u32 CmdCsm; + u32 TuneRxCoalTicks;/* 0x630 */ + u32 TuneTxCoalTicks; + u32 TuneStatTicks; + u32 TuneMaxTxDesc; + u32 TuneMaxRxDesc; /* 0x640 */ + u32 TuneTrace; + u32 TuneLink; + u32 TuneFastLink; + u32 TracePtr; /* 0x650 */ + u32 TraceStrt; + u32 TraceLen; + u32 IfIdx; + u32 IfMtu; /* 0x660 */ + u32 MaskInt; + u32 GigLnkState; + u32 FastLnkState; + u32 pad16[4]; /* 0x670 */ + u32 RxRetCsm; /* 0x680 */ + + u32 pad17[31]; + + u32 CmdRng[64]; /* 0x700 */ + u32 Window[0x200]; +}; + + +typedef struct { + u32 addrhi; + u32 addrlo; +} aceaddr; + + +#define ACE_WINDOW_SIZE 0x800 + +#define ACE_JUMBO_MTU 9000 +#define ACE_STD_MTU 1500 + +#define ACE_TRACE_SIZE 0x8000 + +/* + * Host control register bits. + */ + +#define IN_INT 0x01 +#define CLR_INT 0x02 +#define HW_RESET 0x08 +#define BYTE_SWAP 0x10 +#define WORD_SWAP 0x20 +#define MASK_INTS 0x40 + +/* + * Local control register bits. + */ + +#define EEPROM_DATA_IN 0x800000 +#define EEPROM_DATA_OUT 0x400000 +#define EEPROM_WRITE_ENABLE 0x200000 +#define EEPROM_CLK_OUT 0x100000 + +#define EEPROM_BASE 0xa0000000 + +#define EEPROM_WRITE_SELECT 0xa0 +#define EEPROM_READ_SELECT 0xa1 + +#define SRAM_BANK_512K 0x200 + + +/* + * udelay() values for when clocking the eeprom + */ +#define ACE_SHORT_DELAY 2 +#define ACE_LONG_DELAY 4 + + +/* + * Misc Config bits + */ + +#define SYNC_SRAM_TIMING 0x100000 + + +/* + * CPU state bits. + */ + +#define CPU_RESET 0x01 +#define CPU_TRACE 0x02 +#define CPU_PROM_FAILED 0x10 +#define CPU_HALT 0x00010000 +#define CPU_HALTED 0xffff0000 + + +/* + * PCI State bits. + */ + +#define DMA_READ_MAX_4 0x04 +#define DMA_READ_MAX_16 0x08 +#define DMA_READ_MAX_32 0x0c +#define DMA_READ_MAX_64 0x10 +#define DMA_READ_MAX_128 0x14 +#define DMA_READ_MAX_256 0x18 +#define DMA_READ_MAX_1K 0x1c +#define DMA_WRITE_MAX_4 0x20 +#define DMA_WRITE_MAX_16 0x40 +#define DMA_WRITE_MAX_32 0x60 +#define DMA_WRITE_MAX_64 0x80 +#define DMA_WRITE_MAX_128 0xa0 +#define DMA_WRITE_MAX_256 0xc0 +#define DMA_WRITE_MAX_1K 0xe0 +#define DMA_READ_WRITE_MASK 0xfc +#define MEM_READ_MULTIPLE 0x00020000 +#define PCI_66MHZ 0x00080000 +#define PCI_32BIT 0x00100000 +#define DMA_WRITE_ALL_ALIGN 0x00800000 +#define READ_CMD_MEM 0x06000000 +#define WRITE_CMD_MEM 0x70000000 + + +/* + * Mode status + */ + +#define ACE_BYTE_SWAP_BD 0x02 +#define ACE_WORD_SWAP_BD 0x04 /* not actually used */ +#define ACE_WARN 0x08 +#define ACE_BYTE_SWAP_DMA 0x10 +#define ACE_NO_JUMBO_FRAG 0x200 +#define ACE_FATAL 0x40000000 + + +/* + * DMA config + */ + +#define DMA_THRESH_1W 0x10 +#define DMA_THRESH_2W 0x20 +#define DMA_THRESH_4W 0x40 +#define DMA_THRESH_8W 0x80 +#define DMA_THRESH_16W 0x100 +#define DMA_THRESH_32W 0x0 /* not described in doc, but exists. */ + + +/* + * Tuning parameters + */ + +#define TICKS_PER_SEC 1000000 + + +/* + * Link bits + */ + +#define LNK_PREF 0x00008000 +#define LNK_10MB 0x00010000 +#define LNK_100MB 0x00020000 +#define LNK_1000MB 0x00040000 +#define LNK_FULL_DUPLEX 0x00080000 +#define LNK_HALF_DUPLEX 0x00100000 +#define LNK_TX_FLOW_CTL_Y 0x00200000 +#define LNK_NEG_ADVANCED 0x00400000 +#define LNK_RX_FLOW_CTL_Y 0x00800000 +#define LNK_NIC 0x01000000 +#define LNK_JAM 0x02000000 +#define LNK_JUMBO 0x04000000 +#define LNK_ALTEON 0x08000000 +#define LNK_NEG_FCTL 0x10000000 +#define LNK_NEGOTIATE 0x20000000 +#define LNK_ENABLE 0x40000000 +#define LNK_UP 0x80000000 + + +/* + * Event definitions + */ + +#define EVT_RING_ENTRIES 256 +#define EVT_RING_SIZE (EVT_RING_ENTRIES * sizeof(struct event)) + +struct event { +#ifdef __LITTLE_ENDIAN_BITFIELD + u32 idx:12; + u32 code:12; + u32 evt:8; +#else + u32 evt:8; + u32 code:12; + u32 idx:12; +#endif + u32 pad; +}; + + +/* + * Events + */ + +#define E_FW_RUNNING 0x01 +#define E_STATS_UPDATED 0x04 + +#define E_STATS_UPDATE 0x04 + +#define E_LNK_STATE 0x06 +#define E_C_LINK_UP 0x01 +#define E_C_LINK_DOWN 0x02 +#define E_C_LINK_10_100 0x03 + +#define E_ERROR 0x07 +#define E_C_ERR_INVAL_CMD 0x01 +#define E_C_ERR_UNIMP_CMD 0x02 +#define E_C_ERR_BAD_CFG 0x03 + +#define E_MCAST_LIST 0x08 +#define E_C_MCAST_ADDR_ADD 0x01 +#define E_C_MCAST_ADDR_DEL 0x02 + +#define E_RESET_JUMBO_RNG 0x09 + + +/* + * Commands + */ + +#define CMD_RING_ENTRIES 64 + +struct cmd { +#ifdef __LITTLE_ENDIAN_BITFIELD + u32 idx:12; + u32 code:12; + u32 evt:8; +#else + u32 evt:8; + u32 code:12; + u32 idx:12; +#endif +}; + + +#define C_HOST_STATE 0x01 +#define C_C_STACK_UP 0x01 +#define C_C_STACK_DOWN 0x02 + +#define C_FDR_FILTERING 0x02 +#define C_C_FDR_FILT_ENABLE 0x01 +#define C_C_FDR_FILT_DISABLE 0x02 + +#define C_SET_RX_PRD_IDX 0x03 +#define C_UPDATE_STATS 0x04 +#define C_RESET_JUMBO_RNG 0x05 +#define C_ADD_MULTICAST_ADDR 0x08 +#define C_DEL_MULTICAST_ADDR 0x09 + +#define C_SET_PROMISC_MODE 0x0a +#define C_C_PROMISC_ENABLE 0x01 +#define C_C_PROMISC_DISABLE 0x02 + +#define C_LNK_NEGOTIATION 0x0b +#define C_C_NEGOTIATE_BOTH 0x00 +#define C_C_NEGOTIATE_GIG 0x01 +#define C_C_NEGOTIATE_10_100 0x02 + +#define C_SET_MAC_ADDR 0x0c +#define C_CLEAR_PROFILE 0x0d + +#define C_SET_MULTICAST_MODE 0x0e +#define C_C_MCAST_ENABLE 0x01 +#define C_C_MCAST_DISABLE 0x02 + +#define C_CLEAR_STATS 0x0f +#define C_SET_RX_JUMBO_PRD_IDX 0x10 +#define C_REFRESH_STATS 0x11 + + +/* + * Descriptor flags + */ +#define BD_FLG_TCP_UDP_SUM 0x01 +#define BD_FLG_IP_SUM 0x02 +#define BD_FLG_END 0x04 +#define BD_FLG_MORE 0x08 +#define BD_FLG_JUMBO 0x10 +#define BD_FLG_UCAST 0x20 +#define BD_FLG_MCAST 0x40 +#define BD_FLG_BCAST 0x60 +#define BD_FLG_TYP_MASK 0x60 +#define BD_FLG_IP_FRAG 0x80 +#define BD_FLG_IP_FRAG_END 0x100 +#define BD_FLG_VLAN_TAG 0x200 +#define BD_FLG_FRAME_ERROR 0x400 +#define BD_FLG_COAL_NOW 0x800 +#define BD_FLG_MINI 0x1000 + + +/* + * Ring Control block flags + */ +#define RCB_FLG_TCP_UDP_SUM 0x01 +#define RCB_FLG_IP_SUM 0x02 +#define RCB_FLG_NO_PSEUDO_HDR 0x08 +#define RCB_FLG_VLAN_ASSIST 0x10 +#define RCB_FLG_COAL_INT_ONLY 0x20 +#define RCB_FLG_TX_HOST_RING 0x40 +#define RCB_FLG_IEEE_SNAP_SUM 0x80 +#define RCB_FLG_EXT_RX_BD 0x100 +#define RCB_FLG_RNG_DISABLE 0x200 + + +/* + * TX ring - maximum TX ring entries for Tigon I's is 128 + */ +#define MAX_TX_RING_ENTRIES 256 +#define TIGON_I_TX_RING_ENTRIES 128 +#define TX_RING_SIZE (MAX_TX_RING_ENTRIES * sizeof(struct tx_desc)) +#define TX_RING_BASE 0x3800 + +struct tx_desc{ + aceaddr addr; + u32 flagsize; +#if 0 +/* + * This is in PCI shared mem and must be accessed with readl/writel + * real layout is: + */ +#if __LITTLE_ENDIAN + u16 flags; + u16 size; + u16 vlan; + u16 reserved; +#else + u16 size; + u16 flags; + u16 reserved; + u16 vlan; +#endif +#endif + u32 vlanres; +}; + + +#define RX_STD_RING_ENTRIES 512 +#define RX_STD_RING_SIZE (RX_STD_RING_ENTRIES * sizeof(struct rx_desc)) + +#define RX_JUMBO_RING_ENTRIES 256 +#define RX_JUMBO_RING_SIZE (RX_JUMBO_RING_ENTRIES *sizeof(struct rx_desc)) + +#define RX_MINI_RING_ENTRIES 1024 +#define RX_MINI_RING_SIZE (RX_MINI_RING_ENTRIES *sizeof(struct rx_desc)) + +#define RX_RETURN_RING_ENTRIES 2048 +#define RX_RETURN_RING_SIZE (RX_MAX_RETURN_RING_ENTRIES * \ + sizeof(struct rx_desc)) + +struct rx_desc{ + aceaddr addr; +#ifdef __LITTLE_ENDIAN + u16 size; + u16 idx; +#else + u16 idx; + u16 size; +#endif +#ifdef __LITTLE_ENDIAN + u16 flags; + u16 type; +#else + u16 type; + u16 flags; +#endif +#ifdef __LITTLE_ENDIAN + u16 tcp_udp_csum; + u16 ip_csum; +#else + u16 ip_csum; + u16 tcp_udp_csum; +#endif +#ifdef __LITTLE_ENDIAN + u16 vlan; + u16 err_flags; +#else + u16 err_flags; + u16 vlan; +#endif + u32 reserved; + u32 opague; +}; + + +/* + * This struct is shared with the NIC firmware. + */ +struct ring_ctrl { + aceaddr rngptr; +#ifdef __LITTLE_ENDIAN + u16 flags; + u16 max_len; +#else + u16 max_len; + u16 flags; +#endif + u32 pad; +}; + + +struct ace_mac_stats { + u32 excess_colls; + u32 coll_1; + u32 coll_2; + u32 coll_3; + u32 coll_4; + u32 coll_5; + u32 coll_6; + u32 coll_7; + u32 coll_8; + u32 coll_9; + u32 coll_10; + u32 coll_11; + u32 coll_12; + u32 coll_13; + u32 coll_14; + u32 coll_15; + u32 late_coll; + u32 defers; + u32 crc_err; + u32 underrun; + u32 crs_err; + u32 pad[3]; + u32 drop_ula; + u32 drop_mc; + u32 drop_fc; + u32 drop_space; + u32 coll; + u32 kept_bc; + u32 kept_mc; + u32 kept_uc; +}; + + +struct ace_info { + union { + u32 stats[256]; + } s; + struct ring_ctrl evt_ctrl; + struct ring_ctrl cmd_ctrl; + struct ring_ctrl tx_ctrl; + struct ring_ctrl rx_std_ctrl; + struct ring_ctrl rx_jumbo_ctrl; + struct ring_ctrl rx_mini_ctrl; + struct ring_ctrl rx_return_ctrl; + aceaddr evt_prd_ptr; + aceaddr rx_ret_prd_ptr; + aceaddr tx_csm_ptr; + aceaddr stats2_ptr; +}; + + +struct ring_info { + struct sk_buff *skb; + DEFINE_DMA_UNMAP_ADDR(mapping); +}; + + +/* + * Funny... As soon as we add maplen on alpha, it starts to work + * much slower. Hmm... is it because struct does not fit to one cacheline? + * So, split tx_ring_info. + */ +struct tx_ring_info { + struct sk_buff *skb; + DEFINE_DMA_UNMAP_ADDR(mapping); + DEFINE_DMA_UNMAP_LEN(maplen); +}; + + +/* + * struct ace_skb holding the rings of skb's. This is an awful lot of + * pointers, but I don't see any other smart mode to do this in an + * efficient manner ;-( + */ +struct ace_skb +{ + struct tx_ring_info tx_skbuff[MAX_TX_RING_ENTRIES]; + struct ring_info rx_std_skbuff[RX_STD_RING_ENTRIES]; + struct ring_info rx_mini_skbuff[RX_MINI_RING_ENTRIES]; + struct ring_info rx_jumbo_skbuff[RX_JUMBO_RING_ENTRIES]; +}; + + +/* + * Struct private for the AceNIC. + * + * Elements are grouped so variables used by the tx handling goes + * together, and will go into the same cache lines etc. in order to + * avoid cache line contention between the rx and tx handling on SMP. + * + * Frequently accessed variables are put at the beginning of the + * struct to help the compiler generate better/shorter code. + */ +struct ace_private +{ + struct ace_info *info; + struct ace_regs __iomem *regs; /* register base */ + struct ace_skb *skb; + dma_addr_t info_dma; /* 32/64 bit */ + + int version, link; + int promisc, mcast_all; + + /* + * TX elements + */ + struct tx_desc *tx_ring; + u32 tx_prd; + volatile u32 tx_ret_csm; + int tx_ring_entries; + + /* + * RX elements + */ + unsigned long std_refill_busy + __attribute__ ((aligned (SMP_CACHE_BYTES))); + unsigned long mini_refill_busy, jumbo_refill_busy; + atomic_t cur_rx_bufs; + atomic_t cur_mini_bufs; + atomic_t cur_jumbo_bufs; + u32 rx_std_skbprd, rx_mini_skbprd, rx_jumbo_skbprd; + u32 cur_rx; + + struct rx_desc *rx_std_ring; + struct rx_desc *rx_jumbo_ring; + struct rx_desc *rx_mini_ring; + struct rx_desc *rx_return_ring; + + int tasklet_pending, jumbo; + struct tasklet_struct ace_tasklet; + + struct event *evt_ring; + + volatile u32 *evt_prd, *rx_ret_prd, *tx_csm; + + dma_addr_t tx_ring_dma; /* 32/64 bit */ + dma_addr_t rx_ring_base_dma; + dma_addr_t evt_ring_dma; + dma_addr_t evt_prd_dma, rx_ret_prd_dma, tx_csm_dma; + + unsigned char *trace_buf; + struct pci_dev *pdev; + struct net_device *next; + volatile int fw_running; + int board_idx; + u16 pci_command; + u8 pci_latency; + const char *name; +#ifdef INDEX_DEBUG + spinlock_t debug_lock + __attribute__ ((aligned (SMP_CACHE_BYTES))); + u32 last_tx, last_std_rx, last_mini_rx; +#endif + int pci_using_dac; + u8 firmware_major; + u8 firmware_minor; + u8 firmware_fix; + u32 firmware_start; +}; + + +#define TX_RESERVED MAX_SKB_FRAGS + +static inline int tx_space (struct ace_private *ap, u32 csm, u32 prd) +{ + return (csm - prd - 1) & (ACE_TX_RING_ENTRIES(ap) - 1); +} + +#define tx_free(ap) tx_space((ap)->tx_ret_csm, (ap)->tx_prd, ap) +#define tx_ring_full(ap, csm, prd) (tx_space(ap, csm, prd) <= TX_RESERVED) + +static inline void set_aceaddr(aceaddr *aa, dma_addr_t addr) +{ + u64 baddr = (u64) addr; + aa->addrlo = baddr & 0xffffffff; + aa->addrhi = baddr >> 32; + wmb(); +} + + +static inline void ace_set_txprd(struct ace_regs __iomem *regs, + struct ace_private *ap, u32 value) +{ +#ifdef INDEX_DEBUG + unsigned long flags; + spin_lock_irqsave(&ap->debug_lock, flags); + writel(value, ®s->TxPrd); + if (value == ap->last_tx) + printk(KERN_ERR "AceNIC RACE ALERT! writing identical value " + "to tx producer (%i)\n", value); + ap->last_tx = value; + spin_unlock_irqrestore(&ap->debug_lock, flags); +#else + writel(value, ®s->TxPrd); +#endif + wmb(); +} + + +static inline void ace_mask_irq(struct net_device *dev) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + + if (ACE_IS_TIGON_I(ap)) + writel(1, ®s->MaskInt); + else + writel(readl(®s->HostCtrl) | MASK_INTS, ®s->HostCtrl); + + ace_sync_irq(dev->irq); +} + + +static inline void ace_unmask_irq(struct net_device *dev) +{ + struct ace_private *ap = netdev_priv(dev); + struct ace_regs __iomem *regs = ap->regs; + + if (ACE_IS_TIGON_I(ap)) + writel(0, ®s->MaskInt); + else + writel(readl(®s->HostCtrl) & ~MASK_INTS, ®s->HostCtrl); +} + + +/* + * Prototypes + */ +static int ace_init(struct net_device *dev); +static void ace_load_std_rx_ring(struct net_device *dev, int nr_bufs); +static void ace_load_mini_rx_ring(struct net_device *dev, int nr_bufs); +static void ace_load_jumbo_rx_ring(struct net_device *dev, int nr_bufs); +static irqreturn_t ace_interrupt(int irq, void *dev_id); +static int ace_load_firmware(struct net_device *dev); +static int ace_open(struct net_device *dev); +static netdev_tx_t ace_start_xmit(struct sk_buff *skb, + struct net_device *dev); +static int ace_close(struct net_device *dev); +static void ace_tasklet(unsigned long dev); +static void ace_dump_trace(struct ace_private *ap); +static void ace_set_multicast_list(struct net_device *dev); +static int ace_change_mtu(struct net_device *dev, int new_mtu); +static int ace_set_mac_addr(struct net_device *dev, void *p); +static void ace_set_rxtx_parms(struct net_device *dev, int jumbo); +static int ace_allocate_descriptors(struct net_device *dev); +static void ace_free_descriptors(struct net_device *dev); +static void ace_init_cleanup(struct net_device *dev); +static struct net_device_stats *ace_get_stats(struct net_device *dev); +static int read_eeprom_byte(struct net_device *dev, unsigned long offset); + +#endif /* _ACENIC_H_ */ diff --git a/drivers/net/ethernet/3com/typhoon.c b/drivers/net/ethernet/3com/typhoon.c new file mode 100644 index 000000000000..1d5091a1e49a --- /dev/null +++ b/drivers/net/ethernet/3com/typhoon.c @@ -0,0 +1,2574 @@ +/* typhoon.c: A Linux Ethernet device driver for 3Com 3CR990 family of NICs */ +/* + Written 2002-2004 by David Dillow <dave@thedillows.org> + Based on code written 1998-2000 by Donald Becker <becker@scyld.com> and + Linux 2.2.x driver by David P. McLean <davidpmclean@yahoo.com>. + + This software may be used and distributed according to the terms of + the GNU General Public License (GPL), incorporated herein by reference. + Drivers based on or derived from this code fall under the GPL and must + retain the authorship, copyright and license notice. This file is not + a complete program and may only be used when the entire operating + system is licensed under the GPL. + + This software is available on a public web site. It may enable + cryptographic capabilities of the 3Com hardware, and may be + exported from the United States under License Exception "TSU" + pursuant to 15 C.F.R. Section 740.13(e). + + This work was funded by the National Library of Medicine under + the Department of Energy project number 0274DD06D1 and NLM project + number Y1-LM-2015-01. + + This driver is designed for the 3Com 3CR990 Family of cards with the + 3XP Processor. It has been tested on x86 and sparc64. + + KNOWN ISSUES: + *) Cannot DMA Rx packets to a 2 byte aligned address. Also firmware + issue. Hopefully 3Com will fix it. + *) Waiting for a command response takes 8ms due to non-preemptable + polling. Only significant for getting stats and creating + SAs, but an ugly wart never the less. + + TODO: + *) Doesn't do IPSEC offloading. Yet. Keep yer pants on, it's coming. + *) Add more support for ethtool (especially for NIC stats) + *) Allow disabling of RX checksum offloading + *) Fix MAC changing to work while the interface is up + (Need to put commands on the TX ring, which changes + the locking) + *) Add in FCS to {rx,tx}_bytes, since the hardware doesn't. See + http://oss.sgi.com/cgi-bin/mesg.cgi?a=netdev&i=20031215152211.7003fe8e.rddunlap%40osdl.org +*/ + +/* Set the copy breakpoint for the copy-only-tiny-frames scheme. + * Setting to > 1518 effectively disables this feature. + */ +static int rx_copybreak = 200; + +/* Should we use MMIO or Port IO? + * 0: Port IO + * 1: MMIO + * 2: Try MMIO, fallback to Port IO + */ +static unsigned int use_mmio = 2; + +/* end user-configurable values */ + +/* Maximum number of multicast addresses to filter (vs. rx-all-multicast). + */ +static const int multicast_filter_limit = 32; + +/* Operational parameters that are set at compile time. */ + +/* Keep the ring sizes a power of two for compile efficiency. + * The compiler will convert <unsigned>'%'<2^N> into a bit mask. + * Making the Tx ring too large decreases the effectiveness of channel + * bonding and packet priority. + * There are no ill effects from too-large receive rings. + * + * We don't currently use the Hi Tx ring so, don't make it very big. + * + * Beware that if we start using the Hi Tx ring, we will need to change + * typhoon_num_free_tx() and typhoon_tx_complete() to account for that. + */ +#define TXHI_ENTRIES 2 +#define TXLO_ENTRIES 128 +#define RX_ENTRIES 32 +#define COMMAND_ENTRIES 16 +#define RESPONSE_ENTRIES 32 + +#define COMMAND_RING_SIZE (COMMAND_ENTRIES * sizeof(struct cmd_desc)) +#define RESPONSE_RING_SIZE (RESPONSE_ENTRIES * sizeof(struct resp_desc)) + +/* The 3XP will preload and remove 64 entries from the free buffer + * list, and we need one entry to keep the ring from wrapping, so + * to keep this a power of two, we use 128 entries. + */ +#define RXFREE_ENTRIES 128 +#define RXENT_ENTRIES (RXFREE_ENTRIES - 1) + +/* Operational parameters that usually are not changed. */ + +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (2*HZ) + +#define PKT_BUF_SZ 1536 +#define FIRMWARE_NAME "3com/typhoon.bin" + +#define pr_fmt(fmt) KBUILD_MODNAME " " fmt + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/ethtool.h> +#include <linux/if_vlan.h> +#include <linux/crc32.h> +#include <linux/bitops.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/uaccess.h> +#include <linux/in6.h> +#include <linux/dma-mapping.h> +#include <linux/firmware.h> + +#include "typhoon.h" + +MODULE_AUTHOR("David Dillow <dave@thedillows.org>"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(FIRMWARE_NAME); +MODULE_DESCRIPTION("3Com Typhoon Family (3C990, 3CR990, and variants)"); +MODULE_PARM_DESC(rx_copybreak, "Packets smaller than this are copied and " + "the buffer given back to the NIC. Default " + "is 200."); +MODULE_PARM_DESC(use_mmio, "Use MMIO (1) or PIO(0) to access the NIC. " + "Default is to try MMIO and fallback to PIO."); +module_param(rx_copybreak, int, 0); +module_param(use_mmio, int, 0); + +#if defined(NETIF_F_TSO) && MAX_SKB_FRAGS > 32 +#warning Typhoon only supports 32 entries in its SG list for TSO, disabling TSO +#undef NETIF_F_TSO +#endif + +#if TXLO_ENTRIES <= (2 * MAX_SKB_FRAGS) +#error TX ring too small! +#endif + +struct typhoon_card_info { + const char *name; + const int capabilities; +}; + +#define TYPHOON_CRYPTO_NONE 0x00 +#define TYPHOON_CRYPTO_DES 0x01 +#define TYPHOON_CRYPTO_3DES 0x02 +#define TYPHOON_CRYPTO_VARIABLE 0x04 +#define TYPHOON_FIBER 0x08 +#define TYPHOON_WAKEUP_NEEDS_RESET 0x10 + +enum typhoon_cards { + TYPHOON_TX = 0, TYPHOON_TX95, TYPHOON_TX97, TYPHOON_SVR, + TYPHOON_SVR95, TYPHOON_SVR97, TYPHOON_TXM, TYPHOON_BSVR, + TYPHOON_FX95, TYPHOON_FX97, TYPHOON_FX95SVR, TYPHOON_FX97SVR, + TYPHOON_FXM, +}; + +/* directly indexed by enum typhoon_cards, above */ +static struct typhoon_card_info typhoon_card_info[] __devinitdata = { + { "3Com Typhoon (3C990-TX)", + TYPHOON_CRYPTO_NONE}, + { "3Com Typhoon (3CR990-TX-95)", + TYPHOON_CRYPTO_DES}, + { "3Com Typhoon (3CR990-TX-97)", + TYPHOON_CRYPTO_DES | TYPHOON_CRYPTO_3DES}, + { "3Com Typhoon (3C990SVR)", + TYPHOON_CRYPTO_NONE}, + { "3Com Typhoon (3CR990SVR95)", + TYPHOON_CRYPTO_DES}, + { "3Com Typhoon (3CR990SVR97)", + TYPHOON_CRYPTO_DES | TYPHOON_CRYPTO_3DES}, + { "3Com Typhoon2 (3C990B-TX-M)", + TYPHOON_CRYPTO_VARIABLE}, + { "3Com Typhoon2 (3C990BSVR)", + TYPHOON_CRYPTO_VARIABLE}, + { "3Com Typhoon (3CR990-FX-95)", + TYPHOON_CRYPTO_DES | TYPHOON_FIBER}, + { "3Com Typhoon (3CR990-FX-97)", + TYPHOON_CRYPTO_DES | TYPHOON_CRYPTO_3DES | TYPHOON_FIBER}, + { "3Com Typhoon (3CR990-FX-95 Server)", + TYPHOON_CRYPTO_DES | TYPHOON_FIBER}, + { "3Com Typhoon (3CR990-FX-97 Server)", + TYPHOON_CRYPTO_DES | TYPHOON_CRYPTO_3DES | TYPHOON_FIBER}, + { "3Com Typhoon2 (3C990B-FX-97)", + TYPHOON_CRYPTO_VARIABLE | TYPHOON_FIBER}, +}; + +/* Notes on the new subsystem numbering scheme: + * bits 0-1 indicate crypto capabilities: (0) variable, (1) DES, or (2) 3DES + * bit 4 indicates if this card has secured firmware (we don't support it) + * bit 8 indicates if this is a (0) copper or (1) fiber card + * bits 12-16 indicate card type: (0) client and (1) server + */ +static DEFINE_PCI_DEVICE_TABLE(typhoon_pci_tbl) = { + { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990, + PCI_ANY_ID, PCI_ANY_ID, 0, 0,TYPHOON_TX }, + { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_TX_95, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPHOON_TX95 }, + { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_TX_97, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPHOON_TX97 }, + { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990B, + PCI_ANY_ID, 0x1000, 0, 0, TYPHOON_TXM }, + { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990B, + PCI_ANY_ID, 0x1102, 0, 0, TYPHOON_FXM }, + { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990B, + PCI_ANY_ID, 0x2000, 0, 0, TYPHOON_BSVR }, + { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_FX, + PCI_ANY_ID, 0x1101, 0, 0, TYPHOON_FX95 }, + { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_FX, + PCI_ANY_ID, 0x1102, 0, 0, TYPHOON_FX97 }, + { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_FX, + PCI_ANY_ID, 0x2101, 0, 0, TYPHOON_FX95SVR }, + { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_FX, + PCI_ANY_ID, 0x2102, 0, 0, TYPHOON_FX97SVR }, + { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990SVR95, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPHOON_SVR95 }, + { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990SVR97, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPHOON_SVR97 }, + { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990SVR, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPHOON_SVR }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, typhoon_pci_tbl); + +/* Define the shared memory area + * Align everything the 3XP will normally be using. + * We'll need to move/align txHi if we start using that ring. + */ +#define __3xp_aligned ____cacheline_aligned +struct typhoon_shared { + struct typhoon_interface iface; + struct typhoon_indexes indexes __3xp_aligned; + struct tx_desc txLo[TXLO_ENTRIES] __3xp_aligned; + struct rx_desc rxLo[RX_ENTRIES] __3xp_aligned; + struct rx_desc rxHi[RX_ENTRIES] __3xp_aligned; + struct cmd_desc cmd[COMMAND_ENTRIES] __3xp_aligned; + struct resp_desc resp[RESPONSE_ENTRIES] __3xp_aligned; + struct rx_free rxBuff[RXFREE_ENTRIES] __3xp_aligned; + u32 zeroWord; + struct tx_desc txHi[TXHI_ENTRIES]; +} __packed; + +struct rxbuff_ent { + struct sk_buff *skb; + dma_addr_t dma_addr; +}; + +struct typhoon { + /* Tx cache line section */ + struct transmit_ring txLoRing ____cacheline_aligned; + struct pci_dev * tx_pdev; + void __iomem *tx_ioaddr; + u32 txlo_dma_addr; + + /* Irq/Rx cache line section */ + void __iomem *ioaddr ____cacheline_aligned; + struct typhoon_indexes *indexes; + u8 awaiting_resp; + u8 duplex; + u8 speed; + u8 card_state; + struct basic_ring rxLoRing; + struct pci_dev * pdev; + struct net_device * dev; + struct napi_struct napi; + struct basic_ring rxHiRing; + struct basic_ring rxBuffRing; + struct rxbuff_ent rxbuffers[RXENT_ENTRIES]; + + /* general section */ + spinlock_t command_lock ____cacheline_aligned; + struct basic_ring cmdRing; + struct basic_ring respRing; + struct net_device_stats stats; + struct net_device_stats stats_saved; + struct typhoon_shared * shared; + dma_addr_t shared_dma; + __le16 xcvr_select; + __le16 wol_events; + __le32 offload; + + /* unused stuff (future use) */ + int capabilities; + struct transmit_ring txHiRing; +}; + +enum completion_wait_values { + NoWait = 0, WaitNoSleep, WaitSleep, +}; + +/* These are the values for the typhoon.card_state variable. + * These determine where the statistics will come from in get_stats(). + * The sleep image does not support the statistics we need. + */ +enum state_values { + Sleeping = 0, Running, +}; + +/* PCI writes are not guaranteed to be posted in order, but outstanding writes + * cannot pass a read, so this forces current writes to post. + */ +#define typhoon_post_pci_writes(x) \ + do { if(likely(use_mmio)) ioread32(x+TYPHOON_REG_HEARTBEAT); } while(0) + +/* We'll wait up to six seconds for a reset, and half a second normally. + */ +#define TYPHOON_UDELAY 50 +#define TYPHOON_RESET_TIMEOUT_SLEEP (6 * HZ) +#define TYPHOON_RESET_TIMEOUT_NOSLEEP ((6 * 1000000) / TYPHOON_UDELAY) +#define TYPHOON_WAIT_TIMEOUT ((1000000 / 2) / TYPHOON_UDELAY) + +#if defined(NETIF_F_TSO) +#define skb_tso_size(x) (skb_shinfo(x)->gso_size) +#define TSO_NUM_DESCRIPTORS 2 +#define TSO_OFFLOAD_ON TYPHOON_OFFLOAD_TCP_SEGMENT +#else +#define NETIF_F_TSO 0 +#define skb_tso_size(x) 0 +#define TSO_NUM_DESCRIPTORS 0 +#define TSO_OFFLOAD_ON 0 +#endif + +static inline void +typhoon_inc_index(u32 *index, const int count, const int num_entries) +{ + /* Increment a ring index -- we can use this for all rings execept + * the Rx rings, as they use different size descriptors + * otherwise, everything is the same size as a cmd_desc + */ + *index += count * sizeof(struct cmd_desc); + *index %= num_entries * sizeof(struct cmd_desc); +} + +static inline void +typhoon_inc_cmd_index(u32 *index, const int count) +{ + typhoon_inc_index(index, count, COMMAND_ENTRIES); +} + +static inline void +typhoon_inc_resp_index(u32 *index, const int count) +{ + typhoon_inc_index(index, count, RESPONSE_ENTRIES); +} + +static inline void +typhoon_inc_rxfree_index(u32 *index, const int count) +{ + typhoon_inc_index(index, count, RXFREE_ENTRIES); +} + +static inline void +typhoon_inc_tx_index(u32 *index, const int count) +{ + /* if we start using the Hi Tx ring, this needs updateing */ + typhoon_inc_index(index, count, TXLO_ENTRIES); +} + +static inline void +typhoon_inc_rx_index(u32 *index, const int count) +{ + /* sizeof(struct rx_desc) != sizeof(struct cmd_desc) */ + *index += count * sizeof(struct rx_desc); + *index %= RX_ENTRIES * sizeof(struct rx_desc); +} + +static int +typhoon_reset(void __iomem *ioaddr, int wait_type) +{ + int i, err = 0; + int timeout; + + if(wait_type == WaitNoSleep) + timeout = TYPHOON_RESET_TIMEOUT_NOSLEEP; + else + timeout = TYPHOON_RESET_TIMEOUT_SLEEP; + + iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_MASK); + iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_STATUS); + + iowrite32(TYPHOON_RESET_ALL, ioaddr + TYPHOON_REG_SOFT_RESET); + typhoon_post_pci_writes(ioaddr); + udelay(1); + iowrite32(TYPHOON_RESET_NONE, ioaddr + TYPHOON_REG_SOFT_RESET); + + if(wait_type != NoWait) { + for(i = 0; i < timeout; i++) { + if(ioread32(ioaddr + TYPHOON_REG_STATUS) == + TYPHOON_STATUS_WAITING_FOR_HOST) + goto out; + + if(wait_type == WaitSleep) + schedule_timeout_uninterruptible(1); + else + udelay(TYPHOON_UDELAY); + } + + err = -ETIMEDOUT; + } + +out: + iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_MASK); + iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_STATUS); + + /* The 3XP seems to need a little extra time to complete the load + * of the sleep image before we can reliably boot it. Failure to + * do this occasionally results in a hung adapter after boot in + * typhoon_init_one() while trying to read the MAC address or + * putting the card to sleep. 3Com's driver waits 5ms, but + * that seems to be overkill. However, if we can sleep, we might + * as well give it that much time. Otherwise, we'll give it 500us, + * which should be enough (I've see it work well at 100us, but still + * saw occasional problems.) + */ + if(wait_type == WaitSleep) + msleep(5); + else + udelay(500); + return err; +} + +static int +typhoon_wait_status(void __iomem *ioaddr, u32 wait_value) +{ + int i, err = 0; + + for(i = 0; i < TYPHOON_WAIT_TIMEOUT; i++) { + if(ioread32(ioaddr + TYPHOON_REG_STATUS) == wait_value) + goto out; + udelay(TYPHOON_UDELAY); + } + + err = -ETIMEDOUT; + +out: + return err; +} + +static inline void +typhoon_media_status(struct net_device *dev, struct resp_desc *resp) +{ + if(resp->parm1 & TYPHOON_MEDIA_STAT_NO_LINK) + netif_carrier_off(dev); + else + netif_carrier_on(dev); +} + +static inline void +typhoon_hello(struct typhoon *tp) +{ + struct basic_ring *ring = &tp->cmdRing; + struct cmd_desc *cmd; + + /* We only get a hello request if we've not sent anything to the + * card in a long while. If the lock is held, then we're in the + * process of issuing a command, so we don't need to respond. + */ + if(spin_trylock(&tp->command_lock)) { + cmd = (struct cmd_desc *)(ring->ringBase + ring->lastWrite); + typhoon_inc_cmd_index(&ring->lastWrite, 1); + + INIT_COMMAND_NO_RESPONSE(cmd, TYPHOON_CMD_HELLO_RESP); + wmb(); + iowrite32(ring->lastWrite, tp->ioaddr + TYPHOON_REG_CMD_READY); + spin_unlock(&tp->command_lock); + } +} + +static int +typhoon_process_response(struct typhoon *tp, int resp_size, + struct resp_desc *resp_save) +{ + struct typhoon_indexes *indexes = tp->indexes; + struct resp_desc *resp; + u8 *base = tp->respRing.ringBase; + int count, len, wrap_len; + u32 cleared; + u32 ready; + + cleared = le32_to_cpu(indexes->respCleared); + ready = le32_to_cpu(indexes->respReady); + while(cleared != ready) { + resp = (struct resp_desc *)(base + cleared); + count = resp->numDesc + 1; + if(resp_save && resp->seqNo) { + if(count > resp_size) { + resp_save->flags = TYPHOON_RESP_ERROR; + goto cleanup; + } + + wrap_len = 0; + len = count * sizeof(*resp); + if(unlikely(cleared + len > RESPONSE_RING_SIZE)) { + wrap_len = cleared + len - RESPONSE_RING_SIZE; + len = RESPONSE_RING_SIZE - cleared; + } + + memcpy(resp_save, resp, len); + if(unlikely(wrap_len)) { + resp_save += len / sizeof(*resp); + memcpy(resp_save, base, wrap_len); + } + + resp_save = NULL; + } else if(resp->cmd == TYPHOON_CMD_READ_MEDIA_STATUS) { + typhoon_media_status(tp->dev, resp); + } else if(resp->cmd == TYPHOON_CMD_HELLO_RESP) { + typhoon_hello(tp); + } else { + netdev_err(tp->dev, + "dumping unexpected response 0x%04x:%d:0x%02x:0x%04x:%08x:%08x\n", + le16_to_cpu(resp->cmd), + resp->numDesc, resp->flags, + le16_to_cpu(resp->parm1), + le32_to_cpu(resp->parm2), + le32_to_cpu(resp->parm3)); + } + +cleanup: + typhoon_inc_resp_index(&cleared, count); + } + + indexes->respCleared = cpu_to_le32(cleared); + wmb(); + return resp_save == NULL; +} + +static inline int +typhoon_num_free(int lastWrite, int lastRead, int ringSize) +{ + /* this works for all descriptors but rx_desc, as they are a + * different size than the cmd_desc -- everyone else is the same + */ + lastWrite /= sizeof(struct cmd_desc); + lastRead /= sizeof(struct cmd_desc); + return (ringSize + lastRead - lastWrite - 1) % ringSize; +} + +static inline int +typhoon_num_free_cmd(struct typhoon *tp) +{ + int lastWrite = tp->cmdRing.lastWrite; + int cmdCleared = le32_to_cpu(tp->indexes->cmdCleared); + + return typhoon_num_free(lastWrite, cmdCleared, COMMAND_ENTRIES); +} + +static inline int +typhoon_num_free_resp(struct typhoon *tp) +{ + int respReady = le32_to_cpu(tp->indexes->respReady); + int respCleared = le32_to_cpu(tp->indexes->respCleared); + + return typhoon_num_free(respReady, respCleared, RESPONSE_ENTRIES); +} + +static inline int +typhoon_num_free_tx(struct transmit_ring *ring) +{ + /* if we start using the Hi Tx ring, this needs updating */ + return typhoon_num_free(ring->lastWrite, ring->lastRead, TXLO_ENTRIES); +} + +static int +typhoon_issue_command(struct typhoon *tp, int num_cmd, struct cmd_desc *cmd, + int num_resp, struct resp_desc *resp) +{ + struct typhoon_indexes *indexes = tp->indexes; + struct basic_ring *ring = &tp->cmdRing; + struct resp_desc local_resp; + int i, err = 0; + int got_resp; + int freeCmd, freeResp; + int len, wrap_len; + + spin_lock(&tp->command_lock); + + freeCmd = typhoon_num_free_cmd(tp); + freeResp = typhoon_num_free_resp(tp); + + if(freeCmd < num_cmd || freeResp < num_resp) { + netdev_err(tp->dev, "no descs for cmd, had (needed) %d (%d) cmd, %d (%d) resp\n", + freeCmd, num_cmd, freeResp, num_resp); + err = -ENOMEM; + goto out; + } + + if(cmd->flags & TYPHOON_CMD_RESPOND) { + /* If we're expecting a response, but the caller hasn't given + * us a place to put it, we'll provide one. + */ + tp->awaiting_resp = 1; + if(resp == NULL) { + resp = &local_resp; + num_resp = 1; + } + } + + wrap_len = 0; + len = num_cmd * sizeof(*cmd); + if(unlikely(ring->lastWrite + len > COMMAND_RING_SIZE)) { + wrap_len = ring->lastWrite + len - COMMAND_RING_SIZE; + len = COMMAND_RING_SIZE - ring->lastWrite; + } + + memcpy(ring->ringBase + ring->lastWrite, cmd, len); + if(unlikely(wrap_len)) { + struct cmd_desc *wrap_ptr = cmd; + wrap_ptr += len / sizeof(*cmd); + memcpy(ring->ringBase, wrap_ptr, wrap_len); + } + + typhoon_inc_cmd_index(&ring->lastWrite, num_cmd); + + /* "I feel a presence... another warrior is on the mesa." + */ + wmb(); + iowrite32(ring->lastWrite, tp->ioaddr + TYPHOON_REG_CMD_READY); + typhoon_post_pci_writes(tp->ioaddr); + + if((cmd->flags & TYPHOON_CMD_RESPOND) == 0) + goto out; + + /* Ugh. We'll be here about 8ms, spinning our thumbs, unable to + * preempt or do anything other than take interrupts. So, don't + * wait for a response unless you have to. + * + * I've thought about trying to sleep here, but we're called + * from many contexts that don't allow that. Also, given the way + * 3Com has implemented irq coalescing, we would likely timeout -- + * this has been observed in real life! + * + * The big killer is we have to wait to get stats from the card, + * though we could go to a periodic refresh of those if we don't + * mind them getting somewhat stale. The rest of the waiting + * commands occur during open/close/suspend/resume, so they aren't + * time critical. Creating SAs in the future will also have to + * wait here. + */ + got_resp = 0; + for(i = 0; i < TYPHOON_WAIT_TIMEOUT && !got_resp; i++) { + if(indexes->respCleared != indexes->respReady) + got_resp = typhoon_process_response(tp, num_resp, + resp); + udelay(TYPHOON_UDELAY); + } + + if(!got_resp) { + err = -ETIMEDOUT; + goto out; + } + + /* Collect the error response even if we don't care about the + * rest of the response + */ + if(resp->flags & TYPHOON_RESP_ERROR) + err = -EIO; + +out: + if(tp->awaiting_resp) { + tp->awaiting_resp = 0; + smp_wmb(); + + /* Ugh. If a response was added to the ring between + * the call to typhoon_process_response() and the clearing + * of tp->awaiting_resp, we could have missed the interrupt + * and it could hang in the ring an indeterminate amount of + * time. So, check for it, and interrupt ourselves if this + * is the case. + */ + if(indexes->respCleared != indexes->respReady) + iowrite32(1, tp->ioaddr + TYPHOON_REG_SELF_INTERRUPT); + } + + spin_unlock(&tp->command_lock); + return err; +} + +static inline void +typhoon_tso_fill(struct sk_buff *skb, struct transmit_ring *txRing, + u32 ring_dma) +{ + struct tcpopt_desc *tcpd; + u32 tcpd_offset = ring_dma; + + tcpd = (struct tcpopt_desc *) (txRing->ringBase + txRing->lastWrite); + tcpd_offset += txRing->lastWrite; + tcpd_offset += offsetof(struct tcpopt_desc, bytesTx); + typhoon_inc_tx_index(&txRing->lastWrite, 1); + + tcpd->flags = TYPHOON_OPT_DESC | TYPHOON_OPT_TCP_SEG; + tcpd->numDesc = 1; + tcpd->mss_flags = cpu_to_le16(skb_tso_size(skb)); + tcpd->mss_flags |= TYPHOON_TSO_FIRST | TYPHOON_TSO_LAST; + tcpd->respAddrLo = cpu_to_le32(tcpd_offset); + tcpd->bytesTx = cpu_to_le32(skb->len); + tcpd->status = 0; +} + +static netdev_tx_t +typhoon_start_tx(struct sk_buff *skb, struct net_device *dev) +{ + struct typhoon *tp = netdev_priv(dev); + struct transmit_ring *txRing; + struct tx_desc *txd, *first_txd; + dma_addr_t skb_dma; + int numDesc; + + /* we have two rings to choose from, but we only use txLo for now + * If we start using the Hi ring as well, we'll need to update + * typhoon_stop_runtime(), typhoon_interrupt(), typhoon_num_free_tx(), + * and TXHI_ENTRIES to match, as well as update the TSO code below + * to get the right DMA address + */ + txRing = &tp->txLoRing; + + /* We need one descriptor for each fragment of the sk_buff, plus the + * one for the ->data area of it. + * + * The docs say a maximum of 16 fragment descriptors per TCP option + * descriptor, then make a new packet descriptor and option descriptor + * for the next 16 fragments. The engineers say just an option + * descriptor is needed. I've tested up to 26 fragments with a single + * packet descriptor/option descriptor combo, so I use that for now. + * + * If problems develop with TSO, check this first. + */ + numDesc = skb_shinfo(skb)->nr_frags + 1; + if (skb_is_gso(skb)) + numDesc++; + + /* When checking for free space in the ring, we need to also + * account for the initial Tx descriptor, and we always must leave + * at least one descriptor unused in the ring so that it doesn't + * wrap and look empty. + * + * The only time we should loop here is when we hit the race + * between marking the queue awake and updating the cleared index. + * Just loop and it will appear. This comes from the acenic driver. + */ + while(unlikely(typhoon_num_free_tx(txRing) < (numDesc + 2))) + smp_rmb(); + + first_txd = (struct tx_desc *) (txRing->ringBase + txRing->lastWrite); + typhoon_inc_tx_index(&txRing->lastWrite, 1); + + first_txd->flags = TYPHOON_TX_DESC | TYPHOON_DESC_VALID; + first_txd->numDesc = 0; + first_txd->len = 0; + first_txd->tx_addr = (u64)((unsigned long) skb); + first_txd->processFlags = 0; + + if(skb->ip_summed == CHECKSUM_PARTIAL) { + /* The 3XP will figure out if this is UDP/TCP */ + first_txd->processFlags |= TYPHOON_TX_PF_TCP_CHKSUM; + first_txd->processFlags |= TYPHOON_TX_PF_UDP_CHKSUM; + first_txd->processFlags |= TYPHOON_TX_PF_IP_CHKSUM; + } + + if(vlan_tx_tag_present(skb)) { + first_txd->processFlags |= + TYPHOON_TX_PF_INSERT_VLAN | TYPHOON_TX_PF_VLAN_PRIORITY; + first_txd->processFlags |= + cpu_to_le32(htons(vlan_tx_tag_get(skb)) << + TYPHOON_TX_PF_VLAN_TAG_SHIFT); + } + + if (skb_is_gso(skb)) { + first_txd->processFlags |= TYPHOON_TX_PF_TCP_SEGMENT; + first_txd->numDesc++; + + typhoon_tso_fill(skb, txRing, tp->txlo_dma_addr); + } + + txd = (struct tx_desc *) (txRing->ringBase + txRing->lastWrite); + typhoon_inc_tx_index(&txRing->lastWrite, 1); + + /* No need to worry about padding packet -- the firmware pads + * it with zeros to ETH_ZLEN for us. + */ + if(skb_shinfo(skb)->nr_frags == 0) { + skb_dma = pci_map_single(tp->tx_pdev, skb->data, skb->len, + PCI_DMA_TODEVICE); + txd->flags = TYPHOON_FRAG_DESC | TYPHOON_DESC_VALID; + txd->len = cpu_to_le16(skb->len); + txd->frag.addr = cpu_to_le32(skb_dma); + txd->frag.addrHi = 0; + first_txd->numDesc++; + } else { + int i, len; + + len = skb_headlen(skb); + skb_dma = pci_map_single(tp->tx_pdev, skb->data, len, + PCI_DMA_TODEVICE); + txd->flags = TYPHOON_FRAG_DESC | TYPHOON_DESC_VALID; + txd->len = cpu_to_le16(len); + txd->frag.addr = cpu_to_le32(skb_dma); + txd->frag.addrHi = 0; + first_txd->numDesc++; + + for(i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + void *frag_addr; + + txd = (struct tx_desc *) (txRing->ringBase + + txRing->lastWrite); + typhoon_inc_tx_index(&txRing->lastWrite, 1); + + len = frag->size; + frag_addr = (void *) page_address(frag->page) + + frag->page_offset; + skb_dma = pci_map_single(tp->tx_pdev, frag_addr, len, + PCI_DMA_TODEVICE); + txd->flags = TYPHOON_FRAG_DESC | TYPHOON_DESC_VALID; + txd->len = cpu_to_le16(len); + txd->frag.addr = cpu_to_le32(skb_dma); + txd->frag.addrHi = 0; + first_txd->numDesc++; + } + } + + /* Kick the 3XP + */ + wmb(); + iowrite32(txRing->lastWrite, tp->tx_ioaddr + txRing->writeRegister); + + /* If we don't have room to put the worst case packet on the + * queue, then we must stop the queue. We need 2 extra + * descriptors -- one to prevent ring wrap, and one for the + * Tx header. + */ + numDesc = MAX_SKB_FRAGS + TSO_NUM_DESCRIPTORS + 1; + + if(typhoon_num_free_tx(txRing) < (numDesc + 2)) { + netif_stop_queue(dev); + + /* A Tx complete IRQ could have gotten between, making + * the ring free again. Only need to recheck here, since + * Tx is serialized. + */ + if(typhoon_num_free_tx(txRing) >= (numDesc + 2)) + netif_wake_queue(dev); + } + + return NETDEV_TX_OK; +} + +static void +typhoon_set_rx_mode(struct net_device *dev) +{ + struct typhoon *tp = netdev_priv(dev); + struct cmd_desc xp_cmd; + u32 mc_filter[2]; + __le16 filter; + + filter = TYPHOON_RX_FILTER_DIRECTED | TYPHOON_RX_FILTER_BROADCAST; + if(dev->flags & IFF_PROMISC) { + filter |= TYPHOON_RX_FILTER_PROMISCOUS; + } else if ((netdev_mc_count(dev) > multicast_filter_limit) || + (dev->flags & IFF_ALLMULTI)) { + /* Too many to match, or accept all multicasts. */ + filter |= TYPHOON_RX_FILTER_ALL_MCAST; + } else if (!netdev_mc_empty(dev)) { + struct netdev_hw_addr *ha; + + memset(mc_filter, 0, sizeof(mc_filter)); + netdev_for_each_mc_addr(ha, dev) { + int bit = ether_crc(ETH_ALEN, ha->addr) & 0x3f; + mc_filter[bit >> 5] |= 1 << (bit & 0x1f); + } + + INIT_COMMAND_NO_RESPONSE(&xp_cmd, + TYPHOON_CMD_SET_MULTICAST_HASH); + xp_cmd.parm1 = TYPHOON_MCAST_HASH_SET; + xp_cmd.parm2 = cpu_to_le32(mc_filter[0]); + xp_cmd.parm3 = cpu_to_le32(mc_filter[1]); + typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL); + + filter |= TYPHOON_RX_FILTER_MCAST_HASH; + } + + INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_RX_FILTER); + xp_cmd.parm1 = filter; + typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL); +} + +static int +typhoon_do_get_stats(struct typhoon *tp) +{ + struct net_device_stats *stats = &tp->stats; + struct net_device_stats *saved = &tp->stats_saved; + struct cmd_desc xp_cmd; + struct resp_desc xp_resp[7]; + struct stats_resp *s = (struct stats_resp *) xp_resp; + int err; + + INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_STATS); + err = typhoon_issue_command(tp, 1, &xp_cmd, 7, xp_resp); + if(err < 0) + return err; + + /* 3Com's Linux driver uses txMultipleCollisions as it's + * collisions value, but there is some other collision info as well... + * + * The extra status reported would be a good candidate for + * ethtool_ops->get_{strings,stats}() + */ + stats->tx_packets = le32_to_cpu(s->txPackets) + + saved->tx_packets; + stats->tx_bytes = le64_to_cpu(s->txBytes) + + saved->tx_bytes; + stats->tx_errors = le32_to_cpu(s->txCarrierLost) + + saved->tx_errors; + stats->tx_carrier_errors = le32_to_cpu(s->txCarrierLost) + + saved->tx_carrier_errors; + stats->collisions = le32_to_cpu(s->txMultipleCollisions) + + saved->collisions; + stats->rx_packets = le32_to_cpu(s->rxPacketsGood) + + saved->rx_packets; + stats->rx_bytes = le64_to_cpu(s->rxBytesGood) + + saved->rx_bytes; + stats->rx_fifo_errors = le32_to_cpu(s->rxFifoOverruns) + + saved->rx_fifo_errors; + stats->rx_errors = le32_to_cpu(s->rxFifoOverruns) + + le32_to_cpu(s->BadSSD) + le32_to_cpu(s->rxCrcErrors) + + saved->rx_errors; + stats->rx_crc_errors = le32_to_cpu(s->rxCrcErrors) + + saved->rx_crc_errors; + stats->rx_length_errors = le32_to_cpu(s->rxOversized) + + saved->rx_length_errors; + tp->speed = (s->linkStatus & TYPHOON_LINK_100MBPS) ? + SPEED_100 : SPEED_10; + tp->duplex = (s->linkStatus & TYPHOON_LINK_FULL_DUPLEX) ? + DUPLEX_FULL : DUPLEX_HALF; + + return 0; +} + +static struct net_device_stats * +typhoon_get_stats(struct net_device *dev) +{ + struct typhoon *tp = netdev_priv(dev); + struct net_device_stats *stats = &tp->stats; + struct net_device_stats *saved = &tp->stats_saved; + + smp_rmb(); + if(tp->card_state == Sleeping) + return saved; + + if(typhoon_do_get_stats(tp) < 0) { + netdev_err(dev, "error getting stats\n"); + return saved; + } + + return stats; +} + +static int +typhoon_set_mac_address(struct net_device *dev, void *addr) +{ + struct sockaddr *saddr = (struct sockaddr *) addr; + + if(netif_running(dev)) + return -EBUSY; + + memcpy(dev->dev_addr, saddr->sa_data, dev->addr_len); + return 0; +} + +static void +typhoon_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct typhoon *tp = netdev_priv(dev); + struct pci_dev *pci_dev = tp->pdev; + struct cmd_desc xp_cmd; + struct resp_desc xp_resp[3]; + + smp_rmb(); + if(tp->card_state == Sleeping) { + strcpy(info->fw_version, "Sleep image"); + } else { + INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_VERSIONS); + if(typhoon_issue_command(tp, 1, &xp_cmd, 3, xp_resp) < 0) { + strcpy(info->fw_version, "Unknown runtime"); + } else { + u32 sleep_ver = le32_to_cpu(xp_resp[0].parm2); + snprintf(info->fw_version, 32, "%02x.%03x.%03x", + sleep_ver >> 24, (sleep_ver >> 12) & 0xfff, + sleep_ver & 0xfff); + } + } + + strcpy(info->driver, KBUILD_MODNAME); + strcpy(info->bus_info, pci_name(pci_dev)); +} + +static int +typhoon_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct typhoon *tp = netdev_priv(dev); + + cmd->supported = SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | + SUPPORTED_Autoneg; + + switch (tp->xcvr_select) { + case TYPHOON_XCVR_10HALF: + cmd->advertising = ADVERTISED_10baseT_Half; + break; + case TYPHOON_XCVR_10FULL: + cmd->advertising = ADVERTISED_10baseT_Full; + break; + case TYPHOON_XCVR_100HALF: + cmd->advertising = ADVERTISED_100baseT_Half; + break; + case TYPHOON_XCVR_100FULL: + cmd->advertising = ADVERTISED_100baseT_Full; + break; + case TYPHOON_XCVR_AUTONEG: + cmd->advertising = ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_Autoneg; + break; + } + + if(tp->capabilities & TYPHOON_FIBER) { + cmd->supported |= SUPPORTED_FIBRE; + cmd->advertising |= ADVERTISED_FIBRE; + cmd->port = PORT_FIBRE; + } else { + cmd->supported |= SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_TP; + cmd->advertising |= ADVERTISED_TP; + cmd->port = PORT_TP; + } + + /* need to get stats to make these link speed/duplex valid */ + typhoon_do_get_stats(tp); + ethtool_cmd_speed_set(cmd, tp->speed); + cmd->duplex = tp->duplex; + cmd->phy_address = 0; + cmd->transceiver = XCVR_INTERNAL; + if(tp->xcvr_select == TYPHOON_XCVR_AUTONEG) + cmd->autoneg = AUTONEG_ENABLE; + else + cmd->autoneg = AUTONEG_DISABLE; + cmd->maxtxpkt = 1; + cmd->maxrxpkt = 1; + + return 0; +} + +static int +typhoon_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct typhoon *tp = netdev_priv(dev); + u32 speed = ethtool_cmd_speed(cmd); + struct cmd_desc xp_cmd; + __le16 xcvr; + int err; + + err = -EINVAL; + if (cmd->autoneg == AUTONEG_ENABLE) { + xcvr = TYPHOON_XCVR_AUTONEG; + } else { + if (cmd->duplex == DUPLEX_HALF) { + if (speed == SPEED_10) + xcvr = TYPHOON_XCVR_10HALF; + else if (speed == SPEED_100) + xcvr = TYPHOON_XCVR_100HALF; + else + goto out; + } else if (cmd->duplex == DUPLEX_FULL) { + if (speed == SPEED_10) + xcvr = TYPHOON_XCVR_10FULL; + else if (speed == SPEED_100) + xcvr = TYPHOON_XCVR_100FULL; + else + goto out; + } else + goto out; + } + + INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_XCVR_SELECT); + xp_cmd.parm1 = xcvr; + err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL); + if(err < 0) + goto out; + + tp->xcvr_select = xcvr; + if(cmd->autoneg == AUTONEG_ENABLE) { + tp->speed = 0xff; /* invalid */ + tp->duplex = 0xff; /* invalid */ + } else { + tp->speed = speed; + tp->duplex = cmd->duplex; + } + +out: + return err; +} + +static void +typhoon_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct typhoon *tp = netdev_priv(dev); + + wol->supported = WAKE_PHY | WAKE_MAGIC; + wol->wolopts = 0; + if(tp->wol_events & TYPHOON_WAKE_LINK_EVENT) + wol->wolopts |= WAKE_PHY; + if(tp->wol_events & TYPHOON_WAKE_MAGIC_PKT) + wol->wolopts |= WAKE_MAGIC; + memset(&wol->sopass, 0, sizeof(wol->sopass)); +} + +static int +typhoon_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct typhoon *tp = netdev_priv(dev); + + if(wol->wolopts & ~(WAKE_PHY | WAKE_MAGIC)) + return -EINVAL; + + tp->wol_events = 0; + if(wol->wolopts & WAKE_PHY) + tp->wol_events |= TYPHOON_WAKE_LINK_EVENT; + if(wol->wolopts & WAKE_MAGIC) + tp->wol_events |= TYPHOON_WAKE_MAGIC_PKT; + + return 0; +} + +static void +typhoon_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ering) +{ + ering->rx_max_pending = RXENT_ENTRIES; + ering->rx_mini_max_pending = 0; + ering->rx_jumbo_max_pending = 0; + ering->tx_max_pending = TXLO_ENTRIES - 1; + + ering->rx_pending = RXENT_ENTRIES; + ering->rx_mini_pending = 0; + ering->rx_jumbo_pending = 0; + ering->tx_pending = TXLO_ENTRIES - 1; +} + +static const struct ethtool_ops typhoon_ethtool_ops = { + .get_settings = typhoon_get_settings, + .set_settings = typhoon_set_settings, + .get_drvinfo = typhoon_get_drvinfo, + .get_wol = typhoon_get_wol, + .set_wol = typhoon_set_wol, + .get_link = ethtool_op_get_link, + .get_ringparam = typhoon_get_ringparam, +}; + +static int +typhoon_wait_interrupt(void __iomem *ioaddr) +{ + int i, err = 0; + + for(i = 0; i < TYPHOON_WAIT_TIMEOUT; i++) { + if(ioread32(ioaddr + TYPHOON_REG_INTR_STATUS) & + TYPHOON_INTR_BOOTCMD) + goto out; + udelay(TYPHOON_UDELAY); + } + + err = -ETIMEDOUT; + +out: + iowrite32(TYPHOON_INTR_BOOTCMD, ioaddr + TYPHOON_REG_INTR_STATUS); + return err; +} + +#define shared_offset(x) offsetof(struct typhoon_shared, x) + +static void +typhoon_init_interface(struct typhoon *tp) +{ + struct typhoon_interface *iface = &tp->shared->iface; + dma_addr_t shared_dma; + + memset(tp->shared, 0, sizeof(struct typhoon_shared)); + + /* The *Hi members of iface are all init'd to zero by the memset(). + */ + shared_dma = tp->shared_dma + shared_offset(indexes); + iface->ringIndex = cpu_to_le32(shared_dma); + + shared_dma = tp->shared_dma + shared_offset(txLo); + iface->txLoAddr = cpu_to_le32(shared_dma); + iface->txLoSize = cpu_to_le32(TXLO_ENTRIES * sizeof(struct tx_desc)); + + shared_dma = tp->shared_dma + shared_offset(txHi); + iface->txHiAddr = cpu_to_le32(shared_dma); + iface->txHiSize = cpu_to_le32(TXHI_ENTRIES * sizeof(struct tx_desc)); + + shared_dma = tp->shared_dma + shared_offset(rxBuff); + iface->rxBuffAddr = cpu_to_le32(shared_dma); + iface->rxBuffSize = cpu_to_le32(RXFREE_ENTRIES * + sizeof(struct rx_free)); + + shared_dma = tp->shared_dma + shared_offset(rxLo); + iface->rxLoAddr = cpu_to_le32(shared_dma); + iface->rxLoSize = cpu_to_le32(RX_ENTRIES * sizeof(struct rx_desc)); + + shared_dma = tp->shared_dma + shared_offset(rxHi); + iface->rxHiAddr = cpu_to_le32(shared_dma); + iface->rxHiSize = cpu_to_le32(RX_ENTRIES * sizeof(struct rx_desc)); + + shared_dma = tp->shared_dma + shared_offset(cmd); + iface->cmdAddr = cpu_to_le32(shared_dma); + iface->cmdSize = cpu_to_le32(COMMAND_RING_SIZE); + + shared_dma = tp->shared_dma + shared_offset(resp); + iface->respAddr = cpu_to_le32(shared_dma); + iface->respSize = cpu_to_le32(RESPONSE_RING_SIZE); + + shared_dma = tp->shared_dma + shared_offset(zeroWord); + iface->zeroAddr = cpu_to_le32(shared_dma); + + tp->indexes = &tp->shared->indexes; + tp->txLoRing.ringBase = (u8 *) tp->shared->txLo; + tp->txHiRing.ringBase = (u8 *) tp->shared->txHi; + tp->rxLoRing.ringBase = (u8 *) tp->shared->rxLo; + tp->rxHiRing.ringBase = (u8 *) tp->shared->rxHi; + tp->rxBuffRing.ringBase = (u8 *) tp->shared->rxBuff; + tp->cmdRing.ringBase = (u8 *) tp->shared->cmd; + tp->respRing.ringBase = (u8 *) tp->shared->resp; + + tp->txLoRing.writeRegister = TYPHOON_REG_TX_LO_READY; + tp->txHiRing.writeRegister = TYPHOON_REG_TX_HI_READY; + + tp->txlo_dma_addr = le32_to_cpu(iface->txLoAddr); + tp->card_state = Sleeping; + + tp->offload = TYPHOON_OFFLOAD_IP_CHKSUM | TYPHOON_OFFLOAD_TCP_CHKSUM; + tp->offload |= TYPHOON_OFFLOAD_UDP_CHKSUM | TSO_OFFLOAD_ON; + tp->offload |= TYPHOON_OFFLOAD_VLAN; + + spin_lock_init(&tp->command_lock); + + /* Force the writes to the shared memory area out before continuing. */ + wmb(); +} + +static void +typhoon_init_rings(struct typhoon *tp) +{ + memset(tp->indexes, 0, sizeof(struct typhoon_indexes)); + + tp->txLoRing.lastWrite = 0; + tp->txHiRing.lastWrite = 0; + tp->rxLoRing.lastWrite = 0; + tp->rxHiRing.lastWrite = 0; + tp->rxBuffRing.lastWrite = 0; + tp->cmdRing.lastWrite = 0; + tp->respRing.lastWrite = 0; + + tp->txLoRing.lastRead = 0; + tp->txHiRing.lastRead = 0; +} + +static const struct firmware *typhoon_fw; + +static int +typhoon_request_firmware(struct typhoon *tp) +{ + const struct typhoon_file_header *fHdr; + const struct typhoon_section_header *sHdr; + const u8 *image_data; + u32 numSections; + u32 section_len; + u32 remaining; + int err; + + if (typhoon_fw) + return 0; + + err = request_firmware(&typhoon_fw, FIRMWARE_NAME, &tp->pdev->dev); + if (err) { + netdev_err(tp->dev, "Failed to load firmware \"%s\"\n", + FIRMWARE_NAME); + return err; + } + + image_data = (u8 *) typhoon_fw->data; + remaining = typhoon_fw->size; + if (remaining < sizeof(struct typhoon_file_header)) + goto invalid_fw; + + fHdr = (struct typhoon_file_header *) image_data; + if (memcmp(fHdr->tag, "TYPHOON", 8)) + goto invalid_fw; + + numSections = le32_to_cpu(fHdr->numSections); + image_data += sizeof(struct typhoon_file_header); + remaining -= sizeof(struct typhoon_file_header); + + while (numSections--) { + if (remaining < sizeof(struct typhoon_section_header)) + goto invalid_fw; + + sHdr = (struct typhoon_section_header *) image_data; + image_data += sizeof(struct typhoon_section_header); + section_len = le32_to_cpu(sHdr->len); + + if (remaining < section_len) + goto invalid_fw; + + image_data += section_len; + remaining -= section_len; + } + + return 0; + +invalid_fw: + netdev_err(tp->dev, "Invalid firmware image\n"); + release_firmware(typhoon_fw); + typhoon_fw = NULL; + return -EINVAL; +} + +static int +typhoon_download_firmware(struct typhoon *tp) +{ + void __iomem *ioaddr = tp->ioaddr; + struct pci_dev *pdev = tp->pdev; + const struct typhoon_file_header *fHdr; + const struct typhoon_section_header *sHdr; + const u8 *image_data; + void *dpage; + dma_addr_t dpage_dma; + __sum16 csum; + u32 irqEnabled; + u32 irqMasked; + u32 numSections; + u32 section_len; + u32 len; + u32 load_addr; + u32 hmac; + int i; + int err; + + image_data = (u8 *) typhoon_fw->data; + fHdr = (struct typhoon_file_header *) image_data; + + /* Cannot just map the firmware image using pci_map_single() as + * the firmware is vmalloc()'d and may not be physically contiguous, + * so we allocate some consistent memory to copy the sections into. + */ + err = -ENOMEM; + dpage = pci_alloc_consistent(pdev, PAGE_SIZE, &dpage_dma); + if(!dpage) { + netdev_err(tp->dev, "no DMA mem for firmware\n"); + goto err_out; + } + + irqEnabled = ioread32(ioaddr + TYPHOON_REG_INTR_ENABLE); + iowrite32(irqEnabled | TYPHOON_INTR_BOOTCMD, + ioaddr + TYPHOON_REG_INTR_ENABLE); + irqMasked = ioread32(ioaddr + TYPHOON_REG_INTR_MASK); + iowrite32(irqMasked | TYPHOON_INTR_BOOTCMD, + ioaddr + TYPHOON_REG_INTR_MASK); + + err = -ETIMEDOUT; + if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) { + netdev_err(tp->dev, "card ready timeout\n"); + goto err_out_irq; + } + + numSections = le32_to_cpu(fHdr->numSections); + load_addr = le32_to_cpu(fHdr->startAddr); + + iowrite32(TYPHOON_INTR_BOOTCMD, ioaddr + TYPHOON_REG_INTR_STATUS); + iowrite32(load_addr, ioaddr + TYPHOON_REG_DOWNLOAD_BOOT_ADDR); + hmac = le32_to_cpu(fHdr->hmacDigest[0]); + iowrite32(hmac, ioaddr + TYPHOON_REG_DOWNLOAD_HMAC_0); + hmac = le32_to_cpu(fHdr->hmacDigest[1]); + iowrite32(hmac, ioaddr + TYPHOON_REG_DOWNLOAD_HMAC_1); + hmac = le32_to_cpu(fHdr->hmacDigest[2]); + iowrite32(hmac, ioaddr + TYPHOON_REG_DOWNLOAD_HMAC_2); + hmac = le32_to_cpu(fHdr->hmacDigest[3]); + iowrite32(hmac, ioaddr + TYPHOON_REG_DOWNLOAD_HMAC_3); + hmac = le32_to_cpu(fHdr->hmacDigest[4]); + iowrite32(hmac, ioaddr + TYPHOON_REG_DOWNLOAD_HMAC_4); + typhoon_post_pci_writes(ioaddr); + iowrite32(TYPHOON_BOOTCMD_RUNTIME_IMAGE, ioaddr + TYPHOON_REG_COMMAND); + + image_data += sizeof(struct typhoon_file_header); + + /* The ioread32() in typhoon_wait_interrupt() will force the + * last write to the command register to post, so + * we don't need a typhoon_post_pci_writes() after it. + */ + for(i = 0; i < numSections; i++) { + sHdr = (struct typhoon_section_header *) image_data; + image_data += sizeof(struct typhoon_section_header); + load_addr = le32_to_cpu(sHdr->startAddr); + section_len = le32_to_cpu(sHdr->len); + + while(section_len) { + len = min_t(u32, section_len, PAGE_SIZE); + + if(typhoon_wait_interrupt(ioaddr) < 0 || + ioread32(ioaddr + TYPHOON_REG_STATUS) != + TYPHOON_STATUS_WAITING_FOR_SEGMENT) { + netdev_err(tp->dev, "segment ready timeout\n"); + goto err_out_irq; + } + + /* Do an pseudo IPv4 checksum on the data -- first + * need to convert each u16 to cpu order before + * summing. Fortunately, due to the properties of + * the checksum, we can do this once, at the end. + */ + csum = csum_fold(csum_partial_copy_nocheck(image_data, + dpage, len, + 0)); + + iowrite32(len, ioaddr + TYPHOON_REG_BOOT_LENGTH); + iowrite32(le16_to_cpu((__force __le16)csum), + ioaddr + TYPHOON_REG_BOOT_CHECKSUM); + iowrite32(load_addr, + ioaddr + TYPHOON_REG_BOOT_DEST_ADDR); + iowrite32(0, ioaddr + TYPHOON_REG_BOOT_DATA_HI); + iowrite32(dpage_dma, ioaddr + TYPHOON_REG_BOOT_DATA_LO); + typhoon_post_pci_writes(ioaddr); + iowrite32(TYPHOON_BOOTCMD_SEG_AVAILABLE, + ioaddr + TYPHOON_REG_COMMAND); + + image_data += len; + load_addr += len; + section_len -= len; + } + } + + if(typhoon_wait_interrupt(ioaddr) < 0 || + ioread32(ioaddr + TYPHOON_REG_STATUS) != + TYPHOON_STATUS_WAITING_FOR_SEGMENT) { + netdev_err(tp->dev, "final segment ready timeout\n"); + goto err_out_irq; + } + + iowrite32(TYPHOON_BOOTCMD_DNLD_COMPLETE, ioaddr + TYPHOON_REG_COMMAND); + + if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_WAITING_FOR_BOOT) < 0) { + netdev_err(tp->dev, "boot ready timeout, status 0x%0x\n", + ioread32(ioaddr + TYPHOON_REG_STATUS)); + goto err_out_irq; + } + + err = 0; + +err_out_irq: + iowrite32(irqMasked, ioaddr + TYPHOON_REG_INTR_MASK); + iowrite32(irqEnabled, ioaddr + TYPHOON_REG_INTR_ENABLE); + + pci_free_consistent(pdev, PAGE_SIZE, dpage, dpage_dma); + +err_out: + return err; +} + +static int +typhoon_boot_3XP(struct typhoon *tp, u32 initial_status) +{ + void __iomem *ioaddr = tp->ioaddr; + + if(typhoon_wait_status(ioaddr, initial_status) < 0) { + netdev_err(tp->dev, "boot ready timeout\n"); + goto out_timeout; + } + + iowrite32(0, ioaddr + TYPHOON_REG_BOOT_RECORD_ADDR_HI); + iowrite32(tp->shared_dma, ioaddr + TYPHOON_REG_BOOT_RECORD_ADDR_LO); + typhoon_post_pci_writes(ioaddr); + iowrite32(TYPHOON_BOOTCMD_REG_BOOT_RECORD, + ioaddr + TYPHOON_REG_COMMAND); + + if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_RUNNING) < 0) { + netdev_err(tp->dev, "boot finish timeout (status 0x%x)\n", + ioread32(ioaddr + TYPHOON_REG_STATUS)); + goto out_timeout; + } + + /* Clear the Transmit and Command ready registers + */ + iowrite32(0, ioaddr + TYPHOON_REG_TX_HI_READY); + iowrite32(0, ioaddr + TYPHOON_REG_CMD_READY); + iowrite32(0, ioaddr + TYPHOON_REG_TX_LO_READY); + typhoon_post_pci_writes(ioaddr); + iowrite32(TYPHOON_BOOTCMD_BOOT, ioaddr + TYPHOON_REG_COMMAND); + + return 0; + +out_timeout: + return -ETIMEDOUT; +} + +static u32 +typhoon_clean_tx(struct typhoon *tp, struct transmit_ring *txRing, + volatile __le32 * index) +{ + u32 lastRead = txRing->lastRead; + struct tx_desc *tx; + dma_addr_t skb_dma; + int dma_len; + int type; + + while(lastRead != le32_to_cpu(*index)) { + tx = (struct tx_desc *) (txRing->ringBase + lastRead); + type = tx->flags & TYPHOON_TYPE_MASK; + + if(type == TYPHOON_TX_DESC) { + /* This tx_desc describes a packet. + */ + unsigned long ptr = tx->tx_addr; + struct sk_buff *skb = (struct sk_buff *) ptr; + dev_kfree_skb_irq(skb); + } else if(type == TYPHOON_FRAG_DESC) { + /* This tx_desc describes a memory mapping. Free it. + */ + skb_dma = (dma_addr_t) le32_to_cpu(tx->frag.addr); + dma_len = le16_to_cpu(tx->len); + pci_unmap_single(tp->pdev, skb_dma, dma_len, + PCI_DMA_TODEVICE); + } + + tx->flags = 0; + typhoon_inc_tx_index(&lastRead, 1); + } + + return lastRead; +} + +static void +typhoon_tx_complete(struct typhoon *tp, struct transmit_ring *txRing, + volatile __le32 * index) +{ + u32 lastRead; + int numDesc = MAX_SKB_FRAGS + 1; + + /* This will need changing if we start to use the Hi Tx ring. */ + lastRead = typhoon_clean_tx(tp, txRing, index); + if(netif_queue_stopped(tp->dev) && typhoon_num_free(txRing->lastWrite, + lastRead, TXLO_ENTRIES) > (numDesc + 2)) + netif_wake_queue(tp->dev); + + txRing->lastRead = lastRead; + smp_wmb(); +} + +static void +typhoon_recycle_rx_skb(struct typhoon *tp, u32 idx) +{ + struct typhoon_indexes *indexes = tp->indexes; + struct rxbuff_ent *rxb = &tp->rxbuffers[idx]; + struct basic_ring *ring = &tp->rxBuffRing; + struct rx_free *r; + + if((ring->lastWrite + sizeof(*r)) % (RXFREE_ENTRIES * sizeof(*r)) == + le32_to_cpu(indexes->rxBuffCleared)) { + /* no room in ring, just drop the skb + */ + dev_kfree_skb_any(rxb->skb); + rxb->skb = NULL; + return; + } + + r = (struct rx_free *) (ring->ringBase + ring->lastWrite); + typhoon_inc_rxfree_index(&ring->lastWrite, 1); + r->virtAddr = idx; + r->physAddr = cpu_to_le32(rxb->dma_addr); + + /* Tell the card about it */ + wmb(); + indexes->rxBuffReady = cpu_to_le32(ring->lastWrite); +} + +static int +typhoon_alloc_rx_skb(struct typhoon *tp, u32 idx) +{ + struct typhoon_indexes *indexes = tp->indexes; + struct rxbuff_ent *rxb = &tp->rxbuffers[idx]; + struct basic_ring *ring = &tp->rxBuffRing; + struct rx_free *r; + struct sk_buff *skb; + dma_addr_t dma_addr; + + rxb->skb = NULL; + + if((ring->lastWrite + sizeof(*r)) % (RXFREE_ENTRIES * sizeof(*r)) == + le32_to_cpu(indexes->rxBuffCleared)) + return -ENOMEM; + + skb = dev_alloc_skb(PKT_BUF_SZ); + if(!skb) + return -ENOMEM; + +#if 0 + /* Please, 3com, fix the firmware to allow DMA to a unaligned + * address! Pretty please? + */ + skb_reserve(skb, 2); +#endif + + skb->dev = tp->dev; + dma_addr = pci_map_single(tp->pdev, skb->data, + PKT_BUF_SZ, PCI_DMA_FROMDEVICE); + + /* Since no card does 64 bit DAC, the high bits will never + * change from zero. + */ + r = (struct rx_free *) (ring->ringBase + ring->lastWrite); + typhoon_inc_rxfree_index(&ring->lastWrite, 1); + r->virtAddr = idx; + r->physAddr = cpu_to_le32(dma_addr); + rxb->skb = skb; + rxb->dma_addr = dma_addr; + + /* Tell the card about it */ + wmb(); + indexes->rxBuffReady = cpu_to_le32(ring->lastWrite); + return 0; +} + +static int +typhoon_rx(struct typhoon *tp, struct basic_ring *rxRing, volatile __le32 * ready, + volatile __le32 * cleared, int budget) +{ + struct rx_desc *rx; + struct sk_buff *skb, *new_skb; + struct rxbuff_ent *rxb; + dma_addr_t dma_addr; + u32 local_ready; + u32 rxaddr; + int pkt_len; + u32 idx; + __le32 csum_bits; + int received; + + received = 0; + local_ready = le32_to_cpu(*ready); + rxaddr = le32_to_cpu(*cleared); + while(rxaddr != local_ready && budget > 0) { + rx = (struct rx_desc *) (rxRing->ringBase + rxaddr); + idx = rx->addr; + rxb = &tp->rxbuffers[idx]; + skb = rxb->skb; + dma_addr = rxb->dma_addr; + + typhoon_inc_rx_index(&rxaddr, 1); + + if(rx->flags & TYPHOON_RX_ERROR) { + typhoon_recycle_rx_skb(tp, idx); + continue; + } + + pkt_len = le16_to_cpu(rx->frameLen); + + if(pkt_len < rx_copybreak && + (new_skb = dev_alloc_skb(pkt_len + 2)) != NULL) { + skb_reserve(new_skb, 2); + pci_dma_sync_single_for_cpu(tp->pdev, dma_addr, + PKT_BUF_SZ, + PCI_DMA_FROMDEVICE); + skb_copy_to_linear_data(new_skb, skb->data, pkt_len); + pci_dma_sync_single_for_device(tp->pdev, dma_addr, + PKT_BUF_SZ, + PCI_DMA_FROMDEVICE); + skb_put(new_skb, pkt_len); + typhoon_recycle_rx_skb(tp, idx); + } else { + new_skb = skb; + skb_put(new_skb, pkt_len); + pci_unmap_single(tp->pdev, dma_addr, PKT_BUF_SZ, + PCI_DMA_FROMDEVICE); + typhoon_alloc_rx_skb(tp, idx); + } + new_skb->protocol = eth_type_trans(new_skb, tp->dev); + csum_bits = rx->rxStatus & (TYPHOON_RX_IP_CHK_GOOD | + TYPHOON_RX_UDP_CHK_GOOD | TYPHOON_RX_TCP_CHK_GOOD); + if(csum_bits == + (TYPHOON_RX_IP_CHK_GOOD | TYPHOON_RX_TCP_CHK_GOOD) || + csum_bits == + (TYPHOON_RX_IP_CHK_GOOD | TYPHOON_RX_UDP_CHK_GOOD)) { + new_skb->ip_summed = CHECKSUM_UNNECESSARY; + } else + skb_checksum_none_assert(new_skb); + + if (rx->rxStatus & TYPHOON_RX_VLAN) + __vlan_hwaccel_put_tag(new_skb, + ntohl(rx->vlanTag) & 0xffff); + netif_receive_skb(new_skb); + + received++; + budget--; + } + *cleared = cpu_to_le32(rxaddr); + + return received; +} + +static void +typhoon_fill_free_ring(struct typhoon *tp) +{ + u32 i; + + for(i = 0; i < RXENT_ENTRIES; i++) { + struct rxbuff_ent *rxb = &tp->rxbuffers[i]; + if(rxb->skb) + continue; + if(typhoon_alloc_rx_skb(tp, i) < 0) + break; + } +} + +static int +typhoon_poll(struct napi_struct *napi, int budget) +{ + struct typhoon *tp = container_of(napi, struct typhoon, napi); + struct typhoon_indexes *indexes = tp->indexes; + int work_done; + + rmb(); + if(!tp->awaiting_resp && indexes->respReady != indexes->respCleared) + typhoon_process_response(tp, 0, NULL); + + if(le32_to_cpu(indexes->txLoCleared) != tp->txLoRing.lastRead) + typhoon_tx_complete(tp, &tp->txLoRing, &indexes->txLoCleared); + + work_done = 0; + + if(indexes->rxHiCleared != indexes->rxHiReady) { + work_done += typhoon_rx(tp, &tp->rxHiRing, &indexes->rxHiReady, + &indexes->rxHiCleared, budget); + } + + if(indexes->rxLoCleared != indexes->rxLoReady) { + work_done += typhoon_rx(tp, &tp->rxLoRing, &indexes->rxLoReady, + &indexes->rxLoCleared, budget - work_done); + } + + if(le32_to_cpu(indexes->rxBuffCleared) == tp->rxBuffRing.lastWrite) { + /* rxBuff ring is empty, try to fill it. */ + typhoon_fill_free_ring(tp); + } + + if (work_done < budget) { + napi_complete(napi); + iowrite32(TYPHOON_INTR_NONE, + tp->ioaddr + TYPHOON_REG_INTR_MASK); + typhoon_post_pci_writes(tp->ioaddr); + } + + return work_done; +} + +static irqreturn_t +typhoon_interrupt(int irq, void *dev_instance) +{ + struct net_device *dev = dev_instance; + struct typhoon *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->ioaddr; + u32 intr_status; + + intr_status = ioread32(ioaddr + TYPHOON_REG_INTR_STATUS); + if(!(intr_status & TYPHOON_INTR_HOST_INT)) + return IRQ_NONE; + + iowrite32(intr_status, ioaddr + TYPHOON_REG_INTR_STATUS); + + if (napi_schedule_prep(&tp->napi)) { + iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_MASK); + typhoon_post_pci_writes(ioaddr); + __napi_schedule(&tp->napi); + } else { + netdev_err(dev, "Error, poll already scheduled\n"); + } + return IRQ_HANDLED; +} + +static void +typhoon_free_rx_rings(struct typhoon *tp) +{ + u32 i; + + for(i = 0; i < RXENT_ENTRIES; i++) { + struct rxbuff_ent *rxb = &tp->rxbuffers[i]; + if(rxb->skb) { + pci_unmap_single(tp->pdev, rxb->dma_addr, PKT_BUF_SZ, + PCI_DMA_FROMDEVICE); + dev_kfree_skb(rxb->skb); + rxb->skb = NULL; + } + } +} + +static int +typhoon_sleep(struct typhoon *tp, pci_power_t state, __le16 events) +{ + struct pci_dev *pdev = tp->pdev; + void __iomem *ioaddr = tp->ioaddr; + struct cmd_desc xp_cmd; + int err; + + INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_ENABLE_WAKE_EVENTS); + xp_cmd.parm1 = events; + err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL); + if(err < 0) { + netdev_err(tp->dev, "typhoon_sleep(): wake events cmd err %d\n", + err); + return err; + } + + INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_GOTO_SLEEP); + err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL); + if(err < 0) { + netdev_err(tp->dev, "typhoon_sleep(): sleep cmd err %d\n", err); + return err; + } + + if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_SLEEPING) < 0) + return -ETIMEDOUT; + + /* Since we cannot monitor the status of the link while sleeping, + * tell the world it went away. + */ + netif_carrier_off(tp->dev); + + pci_enable_wake(tp->pdev, state, 1); + pci_disable_device(pdev); + return pci_set_power_state(pdev, state); +} + +static int +typhoon_wakeup(struct typhoon *tp, int wait_type) +{ + struct pci_dev *pdev = tp->pdev; + void __iomem *ioaddr = tp->ioaddr; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + /* Post 2.x.x versions of the Sleep Image require a reset before + * we can download the Runtime Image. But let's not make users of + * the old firmware pay for the reset. + */ + iowrite32(TYPHOON_BOOTCMD_WAKEUP, ioaddr + TYPHOON_REG_COMMAND); + if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_WAITING_FOR_HOST) < 0 || + (tp->capabilities & TYPHOON_WAKEUP_NEEDS_RESET)) + return typhoon_reset(ioaddr, wait_type); + + return 0; +} + +static int +typhoon_start_runtime(struct typhoon *tp) +{ + struct net_device *dev = tp->dev; + void __iomem *ioaddr = tp->ioaddr; + struct cmd_desc xp_cmd; + int err; + + typhoon_init_rings(tp); + typhoon_fill_free_ring(tp); + + err = typhoon_download_firmware(tp); + if(err < 0) { + netdev_err(tp->dev, "cannot load runtime on 3XP\n"); + goto error_out; + } + + if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_BOOT) < 0) { + netdev_err(tp->dev, "cannot boot 3XP\n"); + err = -EIO; + goto error_out; + } + + INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_MAX_PKT_SIZE); + xp_cmd.parm1 = cpu_to_le16(PKT_BUF_SZ); + err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL); + if(err < 0) + goto error_out; + + INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_MAC_ADDRESS); + xp_cmd.parm1 = cpu_to_le16(ntohs(*(__be16 *)&dev->dev_addr[0])); + xp_cmd.parm2 = cpu_to_le32(ntohl(*(__be32 *)&dev->dev_addr[2])); + err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL); + if(err < 0) + goto error_out; + + /* Disable IRQ coalescing -- we can reenable it when 3Com gives + * us some more information on how to control it. + */ + INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_IRQ_COALESCE_CTRL); + xp_cmd.parm1 = 0; + err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL); + if(err < 0) + goto error_out; + + INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_XCVR_SELECT); + xp_cmd.parm1 = tp->xcvr_select; + err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL); + if(err < 0) + goto error_out; + + INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_VLAN_TYPE_WRITE); + xp_cmd.parm1 = cpu_to_le16(ETH_P_8021Q); + err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL); + if(err < 0) + goto error_out; + + INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_OFFLOAD_TASKS); + xp_cmd.parm2 = tp->offload; + xp_cmd.parm3 = tp->offload; + err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL); + if(err < 0) + goto error_out; + + typhoon_set_rx_mode(dev); + + INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_TX_ENABLE); + err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL); + if(err < 0) + goto error_out; + + INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_RX_ENABLE); + err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL); + if(err < 0) + goto error_out; + + tp->card_state = Running; + smp_wmb(); + + iowrite32(TYPHOON_INTR_ENABLE_ALL, ioaddr + TYPHOON_REG_INTR_ENABLE); + iowrite32(TYPHOON_INTR_NONE, ioaddr + TYPHOON_REG_INTR_MASK); + typhoon_post_pci_writes(ioaddr); + + return 0; + +error_out: + typhoon_reset(ioaddr, WaitNoSleep); + typhoon_free_rx_rings(tp); + typhoon_init_rings(tp); + return err; +} + +static int +typhoon_stop_runtime(struct typhoon *tp, int wait_type) +{ + struct typhoon_indexes *indexes = tp->indexes; + struct transmit_ring *txLo = &tp->txLoRing; + void __iomem *ioaddr = tp->ioaddr; + struct cmd_desc xp_cmd; + int i; + + /* Disable interrupts early, since we can't schedule a poll + * when called with !netif_running(). This will be posted + * when we force the posting of the command. + */ + iowrite32(TYPHOON_INTR_NONE, ioaddr + TYPHOON_REG_INTR_ENABLE); + + INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_RX_DISABLE); + typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL); + + /* Wait 1/2 sec for any outstanding transmits to occur + * We'll cleanup after the reset if this times out. + */ + for(i = 0; i < TYPHOON_WAIT_TIMEOUT; i++) { + if(indexes->txLoCleared == cpu_to_le32(txLo->lastWrite)) + break; + udelay(TYPHOON_UDELAY); + } + + if(i == TYPHOON_WAIT_TIMEOUT) + netdev_err(tp->dev, "halt timed out waiting for Tx to complete\n"); + + INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_TX_DISABLE); + typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL); + + /* save the statistics so when we bring the interface up again, + * the values reported to userspace are correct. + */ + tp->card_state = Sleeping; + smp_wmb(); + typhoon_do_get_stats(tp); + memcpy(&tp->stats_saved, &tp->stats, sizeof(struct net_device_stats)); + + INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_HALT); + typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL); + + if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_HALTED) < 0) + netdev_err(tp->dev, "timed out waiting for 3XP to halt\n"); + + if(typhoon_reset(ioaddr, wait_type) < 0) { + netdev_err(tp->dev, "unable to reset 3XP\n"); + return -ETIMEDOUT; + } + + /* cleanup any outstanding Tx packets */ + if(indexes->txLoCleared != cpu_to_le32(txLo->lastWrite)) { + indexes->txLoCleared = cpu_to_le32(txLo->lastWrite); + typhoon_clean_tx(tp, &tp->txLoRing, &indexes->txLoCleared); + } + + return 0; +} + +static void +typhoon_tx_timeout(struct net_device *dev) +{ + struct typhoon *tp = netdev_priv(dev); + + if(typhoon_reset(tp->ioaddr, WaitNoSleep) < 0) { + netdev_warn(dev, "could not reset in tx timeout\n"); + goto truly_dead; + } + + /* If we ever start using the Hi ring, it will need cleaning too */ + typhoon_clean_tx(tp, &tp->txLoRing, &tp->indexes->txLoCleared); + typhoon_free_rx_rings(tp); + + if(typhoon_start_runtime(tp) < 0) { + netdev_err(dev, "could not start runtime in tx timeout\n"); + goto truly_dead; + } + + netif_wake_queue(dev); + return; + +truly_dead: + /* Reset the hardware, and turn off carrier to avoid more timeouts */ + typhoon_reset(tp->ioaddr, NoWait); + netif_carrier_off(dev); +} + +static int +typhoon_open(struct net_device *dev) +{ + struct typhoon *tp = netdev_priv(dev); + int err; + + err = typhoon_request_firmware(tp); + if (err) + goto out; + + err = typhoon_wakeup(tp, WaitSleep); + if(err < 0) { + netdev_err(dev, "unable to wakeup device\n"); + goto out_sleep; + } + + err = request_irq(dev->irq, typhoon_interrupt, IRQF_SHARED, + dev->name, dev); + if(err < 0) + goto out_sleep; + + napi_enable(&tp->napi); + + err = typhoon_start_runtime(tp); + if(err < 0) { + napi_disable(&tp->napi); + goto out_irq; + } + + netif_start_queue(dev); + return 0; + +out_irq: + free_irq(dev->irq, dev); + +out_sleep: + if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) { + netdev_err(dev, "unable to reboot into sleep img\n"); + typhoon_reset(tp->ioaddr, NoWait); + goto out; + } + + if(typhoon_sleep(tp, PCI_D3hot, 0) < 0) + netdev_err(dev, "unable to go back to sleep\n"); + +out: + return err; +} + +static int +typhoon_close(struct net_device *dev) +{ + struct typhoon *tp = netdev_priv(dev); + + netif_stop_queue(dev); + napi_disable(&tp->napi); + + if(typhoon_stop_runtime(tp, WaitSleep) < 0) + netdev_err(dev, "unable to stop runtime\n"); + + /* Make sure there is no irq handler running on a different CPU. */ + free_irq(dev->irq, dev); + + typhoon_free_rx_rings(tp); + typhoon_init_rings(tp); + + if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) + netdev_err(dev, "unable to boot sleep image\n"); + + if(typhoon_sleep(tp, PCI_D3hot, 0) < 0) + netdev_err(dev, "unable to put card to sleep\n"); + + return 0; +} + +#ifdef CONFIG_PM +static int +typhoon_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct typhoon *tp = netdev_priv(dev); + + /* If we're down, resume when we are upped. + */ + if(!netif_running(dev)) + return 0; + + if(typhoon_wakeup(tp, WaitNoSleep) < 0) { + netdev_err(dev, "critical: could not wake up in resume\n"); + goto reset; + } + + if(typhoon_start_runtime(tp) < 0) { + netdev_err(dev, "critical: could not start runtime in resume\n"); + goto reset; + } + + netif_device_attach(dev); + return 0; + +reset: + typhoon_reset(tp->ioaddr, NoWait); + return -EBUSY; +} + +static int +typhoon_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct typhoon *tp = netdev_priv(dev); + struct cmd_desc xp_cmd; + + /* If we're down, we're already suspended. + */ + if(!netif_running(dev)) + return 0; + + /* TYPHOON_OFFLOAD_VLAN is always on now, so this doesn't work */ + if(tp->wol_events & TYPHOON_WAKE_MAGIC_PKT) + netdev_warn(dev, "cannot do WAKE_MAGIC with VLAN offloading\n"); + + netif_device_detach(dev); + + if(typhoon_stop_runtime(tp, WaitNoSleep) < 0) { + netdev_err(dev, "unable to stop runtime\n"); + goto need_resume; + } + + typhoon_free_rx_rings(tp); + typhoon_init_rings(tp); + + if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) { + netdev_err(dev, "unable to boot sleep image\n"); + goto need_resume; + } + + INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_MAC_ADDRESS); + xp_cmd.parm1 = cpu_to_le16(ntohs(*(__be16 *)&dev->dev_addr[0])); + xp_cmd.parm2 = cpu_to_le32(ntohl(*(__be32 *)&dev->dev_addr[2])); + if(typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL) < 0) { + netdev_err(dev, "unable to set mac address in suspend\n"); + goto need_resume; + } + + INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_RX_FILTER); + xp_cmd.parm1 = TYPHOON_RX_FILTER_DIRECTED | TYPHOON_RX_FILTER_BROADCAST; + if(typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL) < 0) { + netdev_err(dev, "unable to set rx filter in suspend\n"); + goto need_resume; + } + + if(typhoon_sleep(tp, pci_choose_state(pdev, state), tp->wol_events) < 0) { + netdev_err(dev, "unable to put card to sleep\n"); + goto need_resume; + } + + return 0; + +need_resume: + typhoon_resume(pdev); + return -EBUSY; +} +#endif + +static int __devinit +typhoon_test_mmio(struct pci_dev *pdev) +{ + void __iomem *ioaddr = pci_iomap(pdev, 1, 128); + int mode = 0; + u32 val; + + if(!ioaddr) + goto out; + + if(ioread32(ioaddr + TYPHOON_REG_STATUS) != + TYPHOON_STATUS_WAITING_FOR_HOST) + goto out_unmap; + + iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_MASK); + iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_STATUS); + iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_ENABLE); + + /* Ok, see if we can change our interrupt status register by + * sending ourselves an interrupt. If so, then MMIO works. + * The 50usec delay is arbitrary -- it could probably be smaller. + */ + val = ioread32(ioaddr + TYPHOON_REG_INTR_STATUS); + if((val & TYPHOON_INTR_SELF) == 0) { + iowrite32(1, ioaddr + TYPHOON_REG_SELF_INTERRUPT); + ioread32(ioaddr + TYPHOON_REG_INTR_STATUS); + udelay(50); + val = ioread32(ioaddr + TYPHOON_REG_INTR_STATUS); + if(val & TYPHOON_INTR_SELF) + mode = 1; + } + + iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_MASK); + iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_STATUS); + iowrite32(TYPHOON_INTR_NONE, ioaddr + TYPHOON_REG_INTR_ENABLE); + ioread32(ioaddr + TYPHOON_REG_INTR_STATUS); + +out_unmap: + pci_iounmap(pdev, ioaddr); + +out: + if(!mode) + pr_info("%s: falling back to port IO\n", pci_name(pdev)); + return mode; +} + +static const struct net_device_ops typhoon_netdev_ops = { + .ndo_open = typhoon_open, + .ndo_stop = typhoon_close, + .ndo_start_xmit = typhoon_start_tx, + .ndo_set_multicast_list = typhoon_set_rx_mode, + .ndo_tx_timeout = typhoon_tx_timeout, + .ndo_get_stats = typhoon_get_stats, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = typhoon_set_mac_address, + .ndo_change_mtu = eth_change_mtu, +}; + +static int __devinit +typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct net_device *dev; + struct typhoon *tp; + int card_id = (int) ent->driver_data; + void __iomem *ioaddr; + void *shared; + dma_addr_t shared_dma; + struct cmd_desc xp_cmd; + struct resp_desc xp_resp[3]; + int err = 0; + const char *err_msg; + + dev = alloc_etherdev(sizeof(*tp)); + if(dev == NULL) { + err_msg = "unable to alloc new net device"; + err = -ENOMEM; + goto error_out; + } + SET_NETDEV_DEV(dev, &pdev->dev); + + err = pci_enable_device(pdev); + if(err < 0) { + err_msg = "unable to enable device"; + goto error_out_dev; + } + + err = pci_set_mwi(pdev); + if(err < 0) { + err_msg = "unable to set MWI"; + goto error_out_disable; + } + + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if(err < 0) { + err_msg = "No usable DMA configuration"; + goto error_out_mwi; + } + + /* sanity checks on IO and MMIO BARs + */ + if(!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) { + err_msg = "region #1 not a PCI IO resource, aborting"; + err = -ENODEV; + goto error_out_mwi; + } + if(pci_resource_len(pdev, 0) < 128) { + err_msg = "Invalid PCI IO region size, aborting"; + err = -ENODEV; + goto error_out_mwi; + } + if(!(pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) { + err_msg = "region #1 not a PCI MMIO resource, aborting"; + err = -ENODEV; + goto error_out_mwi; + } + if(pci_resource_len(pdev, 1) < 128) { + err_msg = "Invalid PCI MMIO region size, aborting"; + err = -ENODEV; + goto error_out_mwi; + } + + err = pci_request_regions(pdev, KBUILD_MODNAME); + if(err < 0) { + err_msg = "could not request regions"; + goto error_out_mwi; + } + + /* map our registers + */ + if(use_mmio != 0 && use_mmio != 1) + use_mmio = typhoon_test_mmio(pdev); + + ioaddr = pci_iomap(pdev, use_mmio, 128); + if (!ioaddr) { + err_msg = "cannot remap registers, aborting"; + err = -EIO; + goto error_out_regions; + } + + /* allocate pci dma space for rx and tx descriptor rings + */ + shared = pci_alloc_consistent(pdev, sizeof(struct typhoon_shared), + &shared_dma); + if(!shared) { + err_msg = "could not allocate DMA memory"; + err = -ENOMEM; + goto error_out_remap; + } + + dev->irq = pdev->irq; + tp = netdev_priv(dev); + tp->shared = shared; + tp->shared_dma = shared_dma; + tp->pdev = pdev; + tp->tx_pdev = pdev; + tp->ioaddr = ioaddr; + tp->tx_ioaddr = ioaddr; + tp->dev = dev; + + /* Init sequence: + * 1) Reset the adapter to clear any bad juju + * 2) Reload the sleep image + * 3) Boot the sleep image + * 4) Get the hardware address. + * 5) Put the card to sleep. + */ + if (typhoon_reset(ioaddr, WaitSleep) < 0) { + err_msg = "could not reset 3XP"; + err = -EIO; + goto error_out_dma; + } + + /* Now that we've reset the 3XP and are sure it's not going to + * write all over memory, enable bus mastering, and save our + * state for resuming after a suspend. + */ + pci_set_master(pdev); + pci_save_state(pdev); + + typhoon_init_interface(tp); + typhoon_init_rings(tp); + + if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) { + err_msg = "cannot boot 3XP sleep image"; + err = -EIO; + goto error_out_reset; + } + + INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_MAC_ADDRESS); + if(typhoon_issue_command(tp, 1, &xp_cmd, 1, xp_resp) < 0) { + err_msg = "cannot read MAC address"; + err = -EIO; + goto error_out_reset; + } + + *(__be16 *)&dev->dev_addr[0] = htons(le16_to_cpu(xp_resp[0].parm1)); + *(__be32 *)&dev->dev_addr[2] = htonl(le32_to_cpu(xp_resp[0].parm2)); + + if(!is_valid_ether_addr(dev->dev_addr)) { + err_msg = "Could not obtain valid ethernet address, aborting"; + goto error_out_reset; + } + + /* Read the Sleep Image version last, so the response is valid + * later when we print out the version reported. + */ + INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_VERSIONS); + if(typhoon_issue_command(tp, 1, &xp_cmd, 3, xp_resp) < 0) { + err_msg = "Could not get Sleep Image version"; + goto error_out_reset; + } + + tp->capabilities = typhoon_card_info[card_id].capabilities; + tp->xcvr_select = TYPHOON_XCVR_AUTONEG; + + /* Typhoon 1.0 Sleep Images return one response descriptor to the + * READ_VERSIONS command. Those versions are OK after waking up + * from sleep without needing a reset. Typhoon 1.1+ Sleep Images + * seem to need a little extra help to get started. Since we don't + * know how to nudge it along, just kick it. + */ + if(xp_resp[0].numDesc != 0) + tp->capabilities |= TYPHOON_WAKEUP_NEEDS_RESET; + + if(typhoon_sleep(tp, PCI_D3hot, 0) < 0) { + err_msg = "cannot put adapter to sleep"; + err = -EIO; + goto error_out_reset; + } + + /* The chip-specific entries in the device structure. */ + dev->netdev_ops = &typhoon_netdev_ops; + netif_napi_add(dev, &tp->napi, typhoon_poll, 16); + dev->watchdog_timeo = TX_TIMEOUT; + + SET_ETHTOOL_OPS(dev, &typhoon_ethtool_ops); + + /* We can handle scatter gather, up to 16 entries, and + * we can do IP checksumming (only version 4, doh...) + * + * There's no way to turn off the RX VLAN offloading and stripping + * on the current 3XP firmware -- it does not respect the offload + * settings -- so we only allow the user to toggle the TX processing. + */ + dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO | + NETIF_F_HW_VLAN_TX; + dev->features = dev->hw_features | + NETIF_F_HW_VLAN_RX | NETIF_F_RXCSUM; + + if(register_netdev(dev) < 0) { + err_msg = "unable to register netdev"; + goto error_out_reset; + } + + pci_set_drvdata(pdev, dev); + + netdev_info(dev, "%s at %s 0x%llx, %pM\n", + typhoon_card_info[card_id].name, + use_mmio ? "MMIO" : "IO", + (unsigned long long)pci_resource_start(pdev, use_mmio), + dev->dev_addr); + + /* xp_resp still contains the response to the READ_VERSIONS command. + * For debugging, let the user know what version he has. + */ + if(xp_resp[0].numDesc == 0) { + /* This is the Typhoon 1.0 type Sleep Image, last 16 bits + * of version is Month/Day of build. + */ + u16 monthday = le32_to_cpu(xp_resp[0].parm2) & 0xffff; + netdev_info(dev, "Typhoon 1.0 Sleep Image built %02u/%02u/2000\n", + monthday >> 8, monthday & 0xff); + } else if(xp_resp[0].numDesc == 2) { + /* This is the Typhoon 1.1+ type Sleep Image + */ + u32 sleep_ver = le32_to_cpu(xp_resp[0].parm2); + u8 *ver_string = (u8 *) &xp_resp[1]; + ver_string[25] = 0; + netdev_info(dev, "Typhoon 1.1+ Sleep Image version %02x.%03x.%03x %s\n", + sleep_ver >> 24, (sleep_ver >> 12) & 0xfff, + sleep_ver & 0xfff, ver_string); + } else { + netdev_warn(dev, "Unknown Sleep Image version (%u:%04x)\n", + xp_resp[0].numDesc, le32_to_cpu(xp_resp[0].parm2)); + } + + return 0; + +error_out_reset: + typhoon_reset(ioaddr, NoWait); + +error_out_dma: + pci_free_consistent(pdev, sizeof(struct typhoon_shared), + shared, shared_dma); +error_out_remap: + pci_iounmap(pdev, ioaddr); +error_out_regions: + pci_release_regions(pdev); +error_out_mwi: + pci_clear_mwi(pdev); +error_out_disable: + pci_disable_device(pdev); +error_out_dev: + free_netdev(dev); +error_out: + pr_err("%s: %s\n", pci_name(pdev), err_msg); + return err; +} + +static void __devexit +typhoon_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct typhoon *tp = netdev_priv(dev); + + unregister_netdev(dev); + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + typhoon_reset(tp->ioaddr, NoWait); + pci_iounmap(pdev, tp->ioaddr); + pci_free_consistent(pdev, sizeof(struct typhoon_shared), + tp->shared, tp->shared_dma); + pci_release_regions(pdev); + pci_clear_mwi(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + free_netdev(dev); +} + +static struct pci_driver typhoon_driver = { + .name = KBUILD_MODNAME, + .id_table = typhoon_pci_tbl, + .probe = typhoon_init_one, + .remove = __devexit_p(typhoon_remove_one), +#ifdef CONFIG_PM + .suspend = typhoon_suspend, + .resume = typhoon_resume, +#endif +}; + +static int __init +typhoon_init(void) +{ + return pci_register_driver(&typhoon_driver); +} + +static void __exit +typhoon_cleanup(void) +{ + if (typhoon_fw) + release_firmware(typhoon_fw); + pci_unregister_driver(&typhoon_driver); +} + +module_init(typhoon_init); +module_exit(typhoon_cleanup); diff --git a/drivers/net/ethernet/3com/typhoon.h b/drivers/net/ethernet/3com/typhoon.h new file mode 100644 index 000000000000..88187fc84aa3 --- /dev/null +++ b/drivers/net/ethernet/3com/typhoon.h @@ -0,0 +1,624 @@ +/* typhoon.h: chip info for the 3Com 3CR990 family of controllers */ +/* + Written 2002-2003 by David Dillow <dave@thedillows.org> + + This software may be used and distributed according to the terms of + the GNU General Public License (GPL), incorporated herein by reference. + Drivers based on or derived from this code fall under the GPL and must + retain the authorship, copyright and license notice. This file is not + a complete program and may only be used when the entire operating + system is licensed under the GPL. + + This software is available on a public web site. It may enable + cryptographic capabilities of the 3Com hardware, and may be + exported from the United States under License Exception "TSU" + pursuant to 15 C.F.R. Section 740.13(e). + + This work was funded by the National Library of Medicine under + the Department of Energy project number 0274DD06D1 and NLM project + number Y1-LM-2015-01. +*/ + +/* All Typhoon ring positions are specificed in bytes, and point to the + * first "clean" entry in the ring -- ie the next entry we use for whatever + * purpose. + */ + +/* The Typhoon basic ring + * ringBase: where this ring lives (our virtual address) + * lastWrite: the next entry we'll use + */ +struct basic_ring { + u8 *ringBase; + u32 lastWrite; +}; + +/* The Typoon transmit ring -- same as a basic ring, plus: + * lastRead: where we're at in regard to cleaning up the ring + * writeRegister: register to use for writing (different for Hi & Lo rings) + */ +struct transmit_ring { + u8 *ringBase; + u32 lastWrite; + u32 lastRead; + int writeRegister; +}; + +/* The host<->Typhoon ring index structure + * This indicates the current positions in the rings + * + * All values must be in little endian format for the 3XP + * + * rxHiCleared: entry we've cleared to in the Hi receive ring + * rxLoCleared: entry we've cleared to in the Lo receive ring + * rxBuffReady: next entry we'll put a free buffer in + * respCleared: entry we've cleared to in the response ring + * + * txLoCleared: entry the NIC has cleared to in the Lo transmit ring + * txHiCleared: entry the NIC has cleared to in the Hi transmit ring + * rxLoReady: entry the NIC has filled to in the Lo receive ring + * rxBuffCleared: entry the NIC has cleared in the free buffer ring + * cmdCleared: entry the NIC has cleared in the command ring + * respReady: entry the NIC has filled to in the response ring + * rxHiReady: entry the NIC has filled to in the Hi receive ring + */ +struct typhoon_indexes { + /* The first four are written by the host, and read by the NIC */ + volatile __le32 rxHiCleared; + volatile __le32 rxLoCleared; + volatile __le32 rxBuffReady; + volatile __le32 respCleared; + + /* The remaining are written by the NIC, and read by the host */ + volatile __le32 txLoCleared; + volatile __le32 txHiCleared; + volatile __le32 rxLoReady; + volatile __le32 rxBuffCleared; + volatile __le32 cmdCleared; + volatile __le32 respReady; + volatile __le32 rxHiReady; +} __packed; + +/* The host<->Typhoon interface + * Our means of communicating where things are + * + * All values must be in little endian format for the 3XP + * + * ringIndex: 64 bit bus address of the index structure + * txLoAddr: 64 bit bus address of the Lo transmit ring + * txLoSize: size (in bytes) of the Lo transmit ring + * txHi*: as above for the Hi priority transmit ring + * rxLo*: as above for the Lo priority receive ring + * rxBuff*: as above for the free buffer ring + * cmd*: as above for the command ring + * resp*: as above for the response ring + * zeroAddr: 64 bit bus address of a zero word (for DMA) + * rxHi*: as above for the Hi Priority receive ring + * + * While there is room for 64 bit addresses, current versions of the 3XP + * only do 32 bit addresses, so the *Hi for each of the above will always + * be zero. + */ +struct typhoon_interface { + __le32 ringIndex; + __le32 ringIndexHi; + __le32 txLoAddr; + __le32 txLoAddrHi; + __le32 txLoSize; + __le32 txHiAddr; + __le32 txHiAddrHi; + __le32 txHiSize; + __le32 rxLoAddr; + __le32 rxLoAddrHi; + __le32 rxLoSize; + __le32 rxBuffAddr; + __le32 rxBuffAddrHi; + __le32 rxBuffSize; + __le32 cmdAddr; + __le32 cmdAddrHi; + __le32 cmdSize; + __le32 respAddr; + __le32 respAddrHi; + __le32 respSize; + __le32 zeroAddr; + __le32 zeroAddrHi; + __le32 rxHiAddr; + __le32 rxHiAddrHi; + __le32 rxHiSize; +} __packed; + +/* The Typhoon transmit/fragment descriptor + * + * A packet is described by a packet descriptor, followed by option descriptors, + * if any, then one or more fragment descriptors. + * + * Packet descriptor: + * flags: Descriptor type + * len:i zero, or length of this packet + * addr*: 8 bytes of opaque data to the firmware -- for skb pointer + * processFlags: Determine offload tasks to perform on this packet. + * + * Fragment descriptor: + * flags: Descriptor type + * len:i length of this fragment + * addr: low bytes of DMA address for this part of the packet + * addrHi: hi bytes of DMA address for this part of the packet + * processFlags: must be zero + * + * TYPHOON_DESC_VALID is not mentioned in their docs, but their Linux + * driver uses it. + */ +struct tx_desc { + u8 flags; +#define TYPHOON_TYPE_MASK 0x07 +#define TYPHOON_FRAG_DESC 0x00 +#define TYPHOON_TX_DESC 0x01 +#define TYPHOON_CMD_DESC 0x02 +#define TYPHOON_OPT_DESC 0x03 +#define TYPHOON_RX_DESC 0x04 +#define TYPHOON_RESP_DESC 0x05 +#define TYPHOON_OPT_TYPE_MASK 0xf0 +#define TYPHOON_OPT_IPSEC 0x00 +#define TYPHOON_OPT_TCP_SEG 0x10 +#define TYPHOON_CMD_RESPOND 0x40 +#define TYPHOON_RESP_ERROR 0x40 +#define TYPHOON_RX_ERROR 0x40 +#define TYPHOON_DESC_VALID 0x80 + u8 numDesc; + __le16 len; + union { + struct { + __le32 addr; + __le32 addrHi; + } frag; + u64 tx_addr; /* opaque for hardware, for TX_DESC */ + }; + __le32 processFlags; +#define TYPHOON_TX_PF_NO_CRC cpu_to_le32(0x00000001) +#define TYPHOON_TX_PF_IP_CHKSUM cpu_to_le32(0x00000002) +#define TYPHOON_TX_PF_TCP_CHKSUM cpu_to_le32(0x00000004) +#define TYPHOON_TX_PF_TCP_SEGMENT cpu_to_le32(0x00000008) +#define TYPHOON_TX_PF_INSERT_VLAN cpu_to_le32(0x00000010) +#define TYPHOON_TX_PF_IPSEC cpu_to_le32(0x00000020) +#define TYPHOON_TX_PF_VLAN_PRIORITY cpu_to_le32(0x00000040) +#define TYPHOON_TX_PF_UDP_CHKSUM cpu_to_le32(0x00000080) +#define TYPHOON_TX_PF_PAD_FRAME cpu_to_le32(0x00000100) +#define TYPHOON_TX_PF_RESERVED cpu_to_le32(0x00000e00) +#define TYPHOON_TX_PF_VLAN_MASK cpu_to_le32(0x0ffff000) +#define TYPHOON_TX_PF_INTERNAL cpu_to_le32(0xf0000000) +#define TYPHOON_TX_PF_VLAN_TAG_SHIFT 12 +} __packed; + +/* The TCP Segmentation offload option descriptor + * + * flags: descriptor type + * numDesc: must be 1 + * mss_flags: bits 0-11 (little endian) are MSS, 12 is first TSO descriptor + * 13 is list TSO descriptor, set both if only one TSO + * respAddrLo: low bytes of address of the bytesTx field of this descriptor + * bytesTx: total number of bytes in this TSO request + * status: 0 on completion + */ +struct tcpopt_desc { + u8 flags; + u8 numDesc; + __le16 mss_flags; +#define TYPHOON_TSO_FIRST cpu_to_le16(0x1000) +#define TYPHOON_TSO_LAST cpu_to_le16(0x2000) + __le32 respAddrLo; + __le32 bytesTx; + __le32 status; +} __packed; + +/* The IPSEC Offload descriptor + * + * flags: descriptor type + * numDesc: must be 1 + * ipsecFlags: bit 0: 0 -- generate IV, 1 -- use supplied IV + * sa1, sa2: Security Association IDs for this packet + * reserved: set to 0 + */ +struct ipsec_desc { + u8 flags; + u8 numDesc; + __le16 ipsecFlags; +#define TYPHOON_IPSEC_GEN_IV cpu_to_le16(0x0000) +#define TYPHOON_IPSEC_USE_IV cpu_to_le16(0x0001) + __le32 sa1; + __le32 sa2; + __le32 reserved; +} __packed; + +/* The Typhoon receive descriptor (Updated by NIC) + * + * flags: Descriptor type, error indication + * numDesc: Always zero + * frameLen: the size of the packet received + * addr: low 32 bytes of the virtual addr passed in for this buffer + * addrHi: high 32 bytes of the virtual addr passed in for this buffer + * rxStatus: Error if set in flags, otherwise result of offload processing + * filterResults: results of filtering on packet, not used + * ipsecResults: Results of IPSEC processing + * vlanTag: the 801.2q TCI from the packet + */ +struct rx_desc { + u8 flags; + u8 numDesc; + __le16 frameLen; + u32 addr; /* opaque, comes from virtAddr */ + u32 addrHi; /* opaque, comes from virtAddrHi */ + __le32 rxStatus; +#define TYPHOON_RX_ERR_INTERNAL cpu_to_le32(0x00000000) +#define TYPHOON_RX_ERR_FIFO_UNDERRUN cpu_to_le32(0x00000001) +#define TYPHOON_RX_ERR_BAD_SSD cpu_to_le32(0x00000002) +#define TYPHOON_RX_ERR_RUNT cpu_to_le32(0x00000003) +#define TYPHOON_RX_ERR_CRC cpu_to_le32(0x00000004) +#define TYPHOON_RX_ERR_OVERSIZE cpu_to_le32(0x00000005) +#define TYPHOON_RX_ERR_ALIGN cpu_to_le32(0x00000006) +#define TYPHOON_RX_ERR_DRIBBLE cpu_to_le32(0x00000007) +#define TYPHOON_RX_PROTO_MASK cpu_to_le32(0x00000003) +#define TYPHOON_RX_PROTO_UNKNOWN cpu_to_le32(0x00000000) +#define TYPHOON_RX_PROTO_IP cpu_to_le32(0x00000001) +#define TYPHOON_RX_PROTO_IPX cpu_to_le32(0x00000002) +#define TYPHOON_RX_VLAN cpu_to_le32(0x00000004) +#define TYPHOON_RX_IP_FRAG cpu_to_le32(0x00000008) +#define TYPHOON_RX_IPSEC cpu_to_le32(0x00000010) +#define TYPHOON_RX_IP_CHK_FAIL cpu_to_le32(0x00000020) +#define TYPHOON_RX_TCP_CHK_FAIL cpu_to_le32(0x00000040) +#define TYPHOON_RX_UDP_CHK_FAIL cpu_to_le32(0x00000080) +#define TYPHOON_RX_IP_CHK_GOOD cpu_to_le32(0x00000100) +#define TYPHOON_RX_TCP_CHK_GOOD cpu_to_le32(0x00000200) +#define TYPHOON_RX_UDP_CHK_GOOD cpu_to_le32(0x00000400) + __le16 filterResults; +#define TYPHOON_RX_FILTER_MASK cpu_to_le16(0x7fff) +#define TYPHOON_RX_FILTERED cpu_to_le16(0x8000) + __le16 ipsecResults; +#define TYPHOON_RX_OUTER_AH_GOOD cpu_to_le16(0x0001) +#define TYPHOON_RX_OUTER_ESP_GOOD cpu_to_le16(0x0002) +#define TYPHOON_RX_INNER_AH_GOOD cpu_to_le16(0x0004) +#define TYPHOON_RX_INNER_ESP_GOOD cpu_to_le16(0x0008) +#define TYPHOON_RX_OUTER_AH_FAIL cpu_to_le16(0x0010) +#define TYPHOON_RX_OUTER_ESP_FAIL cpu_to_le16(0x0020) +#define TYPHOON_RX_INNER_AH_FAIL cpu_to_le16(0x0040) +#define TYPHOON_RX_INNER_ESP_FAIL cpu_to_le16(0x0080) +#define TYPHOON_RX_UNKNOWN_SA cpu_to_le16(0x0100) +#define TYPHOON_RX_ESP_FORMAT_ERR cpu_to_le16(0x0200) + __be32 vlanTag; +} __packed; + +/* The Typhoon free buffer descriptor, used to give a buffer to the NIC + * + * physAddr: low 32 bits of the bus address of the buffer + * physAddrHi: high 32 bits of the bus address of the buffer, always zero + * virtAddr: low 32 bits of the skb address + * virtAddrHi: high 32 bits of the skb address, always zero + * + * the virt* address is basically two 32 bit cookies, just passed back + * from the NIC + */ +struct rx_free { + __le32 physAddr; + __le32 physAddrHi; + u32 virtAddr; + u32 virtAddrHi; +} __packed; + +/* The Typhoon command descriptor, used for commands and responses + * + * flags: descriptor type + * numDesc: number of descriptors following in this command/response, + * ie, zero for a one descriptor command + * cmd: the command + * seqNo: sequence number (unused) + * parm1: use varies by command + * parm2: use varies by command + * parm3: use varies by command + */ +struct cmd_desc { + u8 flags; + u8 numDesc; + __le16 cmd; +#define TYPHOON_CMD_TX_ENABLE cpu_to_le16(0x0001) +#define TYPHOON_CMD_TX_DISABLE cpu_to_le16(0x0002) +#define TYPHOON_CMD_RX_ENABLE cpu_to_le16(0x0003) +#define TYPHOON_CMD_RX_DISABLE cpu_to_le16(0x0004) +#define TYPHOON_CMD_SET_RX_FILTER cpu_to_le16(0x0005) +#define TYPHOON_CMD_READ_STATS cpu_to_le16(0x0007) +#define TYPHOON_CMD_XCVR_SELECT cpu_to_le16(0x0013) +#define TYPHOON_CMD_SET_MAX_PKT_SIZE cpu_to_le16(0x001a) +#define TYPHOON_CMD_READ_MEDIA_STATUS cpu_to_le16(0x001b) +#define TYPHOON_CMD_GOTO_SLEEP cpu_to_le16(0x0023) +#define TYPHOON_CMD_SET_MULTICAST_HASH cpu_to_le16(0x0025) +#define TYPHOON_CMD_SET_MAC_ADDRESS cpu_to_le16(0x0026) +#define TYPHOON_CMD_READ_MAC_ADDRESS cpu_to_le16(0x0027) +#define TYPHOON_CMD_VLAN_TYPE_WRITE cpu_to_le16(0x002b) +#define TYPHOON_CMD_CREATE_SA cpu_to_le16(0x0034) +#define TYPHOON_CMD_DELETE_SA cpu_to_le16(0x0035) +#define TYPHOON_CMD_READ_VERSIONS cpu_to_le16(0x0043) +#define TYPHOON_CMD_IRQ_COALESCE_CTRL cpu_to_le16(0x0045) +#define TYPHOON_CMD_ENABLE_WAKE_EVENTS cpu_to_le16(0x0049) +#define TYPHOON_CMD_SET_OFFLOAD_TASKS cpu_to_le16(0x004f) +#define TYPHOON_CMD_HELLO_RESP cpu_to_le16(0x0057) +#define TYPHOON_CMD_HALT cpu_to_le16(0x005d) +#define TYPHOON_CMD_READ_IPSEC_INFO cpu_to_le16(0x005e) +#define TYPHOON_CMD_GET_IPSEC_ENABLE cpu_to_le16(0x0067) +#define TYPHOON_CMD_GET_CMD_LVL cpu_to_le16(0x0069) + u16 seqNo; + __le16 parm1; + __le32 parm2; + __le32 parm3; +} __packed; + +/* The Typhoon response descriptor, see command descriptor for details + */ +struct resp_desc { + u8 flags; + u8 numDesc; + __le16 cmd; + __le16 seqNo; + __le16 parm1; + __le32 parm2; + __le32 parm3; +} __packed; + +#define INIT_COMMAND_NO_RESPONSE(x, command) \ + do { struct cmd_desc *_ptr = (x); \ + memset(_ptr, 0, sizeof(struct cmd_desc)); \ + _ptr->flags = TYPHOON_CMD_DESC | TYPHOON_DESC_VALID; \ + _ptr->cmd = command; \ + } while(0) + +/* We set seqNo to 1 if we're expecting a response from this command */ +#define INIT_COMMAND_WITH_RESPONSE(x, command) \ + do { struct cmd_desc *_ptr = (x); \ + memset(_ptr, 0, sizeof(struct cmd_desc)); \ + _ptr->flags = TYPHOON_CMD_RESPOND | TYPHOON_CMD_DESC; \ + _ptr->flags |= TYPHOON_DESC_VALID; \ + _ptr->cmd = command; \ + _ptr->seqNo = 1; \ + } while(0) + +/* TYPHOON_CMD_SET_RX_FILTER filter bits (cmd.parm1) + */ +#define TYPHOON_RX_FILTER_DIRECTED cpu_to_le16(0x0001) +#define TYPHOON_RX_FILTER_ALL_MCAST cpu_to_le16(0x0002) +#define TYPHOON_RX_FILTER_BROADCAST cpu_to_le16(0x0004) +#define TYPHOON_RX_FILTER_PROMISCOUS cpu_to_le16(0x0008) +#define TYPHOON_RX_FILTER_MCAST_HASH cpu_to_le16(0x0010) + +/* TYPHOON_CMD_READ_STATS response format + */ +struct stats_resp { + u8 flags; + u8 numDesc; + __le16 cmd; + __le16 seqNo; + __le16 unused; + __le32 txPackets; + __le64 txBytes; + __le32 txDeferred; + __le32 txLateCollisions; + __le32 txCollisions; + __le32 txCarrierLost; + __le32 txMultipleCollisions; + __le32 txExcessiveCollisions; + __le32 txFifoUnderruns; + __le32 txMulticastTxOverflows; + __le32 txFiltered; + __le32 rxPacketsGood; + __le64 rxBytesGood; + __le32 rxFifoOverruns; + __le32 BadSSD; + __le32 rxCrcErrors; + __le32 rxOversized; + __le32 rxBroadcast; + __le32 rxMulticast; + __le32 rxOverflow; + __le32 rxFiltered; + __le32 linkStatus; +#define TYPHOON_LINK_STAT_MASK cpu_to_le32(0x00000001) +#define TYPHOON_LINK_GOOD cpu_to_le32(0x00000001) +#define TYPHOON_LINK_BAD cpu_to_le32(0x00000000) +#define TYPHOON_LINK_SPEED_MASK cpu_to_le32(0x00000002) +#define TYPHOON_LINK_100MBPS cpu_to_le32(0x00000002) +#define TYPHOON_LINK_10MBPS cpu_to_le32(0x00000000) +#define TYPHOON_LINK_DUPLEX_MASK cpu_to_le32(0x00000004) +#define TYPHOON_LINK_FULL_DUPLEX cpu_to_le32(0x00000004) +#define TYPHOON_LINK_HALF_DUPLEX cpu_to_le32(0x00000000) + __le32 unused2; + __le32 unused3; +} __packed; + +/* TYPHOON_CMD_XCVR_SELECT xcvr values (resp.parm1) + */ +#define TYPHOON_XCVR_10HALF cpu_to_le16(0x0000) +#define TYPHOON_XCVR_10FULL cpu_to_le16(0x0001) +#define TYPHOON_XCVR_100HALF cpu_to_le16(0x0002) +#define TYPHOON_XCVR_100FULL cpu_to_le16(0x0003) +#define TYPHOON_XCVR_AUTONEG cpu_to_le16(0x0004) + +/* TYPHOON_CMD_READ_MEDIA_STATUS (resp.parm1) + */ +#define TYPHOON_MEDIA_STAT_CRC_STRIP_DISABLE cpu_to_le16(0x0004) +#define TYPHOON_MEDIA_STAT_COLLISION_DETECT cpu_to_le16(0x0010) +#define TYPHOON_MEDIA_STAT_CARRIER_SENSE cpu_to_le16(0x0020) +#define TYPHOON_MEDIA_STAT_POLARITY_REV cpu_to_le16(0x0400) +#define TYPHOON_MEDIA_STAT_NO_LINK cpu_to_le16(0x0800) + +/* TYPHOON_CMD_SET_MULTICAST_HASH enable values (cmd.parm1) + */ +#define TYPHOON_MCAST_HASH_DISABLE cpu_to_le16(0x0000) +#define TYPHOON_MCAST_HASH_ENABLE cpu_to_le16(0x0001) +#define TYPHOON_MCAST_HASH_SET cpu_to_le16(0x0002) + +/* TYPHOON_CMD_CREATE_SA descriptor and settings + */ +struct sa_descriptor { + u8 flags; + u8 numDesc; + u16 cmd; + u16 seqNo; + u16 mode; +#define TYPHOON_SA_MODE_NULL cpu_to_le16(0x0000) +#define TYPHOON_SA_MODE_AH cpu_to_le16(0x0001) +#define TYPHOON_SA_MODE_ESP cpu_to_le16(0x0002) + u8 hashFlags; +#define TYPHOON_SA_HASH_ENABLE 0x01 +#define TYPHOON_SA_HASH_SHA1 0x02 +#define TYPHOON_SA_HASH_MD5 0x04 + u8 direction; +#define TYPHOON_SA_DIR_RX 0x00 +#define TYPHOON_SA_DIR_TX 0x01 + u8 encryptionFlags; +#define TYPHOON_SA_ENCRYPT_ENABLE 0x01 +#define TYPHOON_SA_ENCRYPT_DES 0x02 +#define TYPHOON_SA_ENCRYPT_3DES 0x00 +#define TYPHOON_SA_ENCRYPT_3DES_2KEY 0x00 +#define TYPHOON_SA_ENCRYPT_3DES_3KEY 0x04 +#define TYPHOON_SA_ENCRYPT_CBC 0x08 +#define TYPHOON_SA_ENCRYPT_ECB 0x00 + u8 specifyIndex; +#define TYPHOON_SA_SPECIFY_INDEX 0x01 +#define TYPHOON_SA_GENERATE_INDEX 0x00 + u32 SPI; + u32 destAddr; + u32 destMask; + u8 integKey[20]; + u8 confKey[24]; + u32 index; + u32 unused; + u32 unused2; +} __packed; + +/* TYPHOON_CMD_SET_OFFLOAD_TASKS bits (cmd.parm2 (Tx) & cmd.parm3 (Rx)) + * This is all for IPv4. + */ +#define TYPHOON_OFFLOAD_TCP_CHKSUM cpu_to_le32(0x00000002) +#define TYPHOON_OFFLOAD_UDP_CHKSUM cpu_to_le32(0x00000004) +#define TYPHOON_OFFLOAD_IP_CHKSUM cpu_to_le32(0x00000008) +#define TYPHOON_OFFLOAD_IPSEC cpu_to_le32(0x00000010) +#define TYPHOON_OFFLOAD_BCAST_THROTTLE cpu_to_le32(0x00000020) +#define TYPHOON_OFFLOAD_DHCP_PREVENT cpu_to_le32(0x00000040) +#define TYPHOON_OFFLOAD_VLAN cpu_to_le32(0x00000080) +#define TYPHOON_OFFLOAD_FILTERING cpu_to_le32(0x00000100) +#define TYPHOON_OFFLOAD_TCP_SEGMENT cpu_to_le32(0x00000200) + +/* TYPHOON_CMD_ENABLE_WAKE_EVENTS bits (cmd.parm1) + */ +#define TYPHOON_WAKE_MAGIC_PKT cpu_to_le16(0x01) +#define TYPHOON_WAKE_LINK_EVENT cpu_to_le16(0x02) +#define TYPHOON_WAKE_ICMP_ECHO cpu_to_le16(0x04) +#define TYPHOON_WAKE_ARP cpu_to_le16(0x08) + +/* These are used to load the firmware image on the NIC + */ +struct typhoon_file_header { + u8 tag[8]; + __le32 version; + __le32 numSections; + __le32 startAddr; + __le32 hmacDigest[5]; +} __packed; + +struct typhoon_section_header { + __le32 len; + u16 checksum; + u16 reserved; + __le32 startAddr; +} __packed; + +/* The Typhoon Register offsets + */ +#define TYPHOON_REG_SOFT_RESET 0x00 +#define TYPHOON_REG_INTR_STATUS 0x04 +#define TYPHOON_REG_INTR_ENABLE 0x08 +#define TYPHOON_REG_INTR_MASK 0x0c +#define TYPHOON_REG_SELF_INTERRUPT 0x10 +#define TYPHOON_REG_HOST2ARM7 0x14 +#define TYPHOON_REG_HOST2ARM6 0x18 +#define TYPHOON_REG_HOST2ARM5 0x1c +#define TYPHOON_REG_HOST2ARM4 0x20 +#define TYPHOON_REG_HOST2ARM3 0x24 +#define TYPHOON_REG_HOST2ARM2 0x28 +#define TYPHOON_REG_HOST2ARM1 0x2c +#define TYPHOON_REG_HOST2ARM0 0x30 +#define TYPHOON_REG_ARM2HOST3 0x34 +#define TYPHOON_REG_ARM2HOST2 0x38 +#define TYPHOON_REG_ARM2HOST1 0x3c +#define TYPHOON_REG_ARM2HOST0 0x40 + +#define TYPHOON_REG_BOOT_DATA_LO TYPHOON_REG_HOST2ARM5 +#define TYPHOON_REG_BOOT_DATA_HI TYPHOON_REG_HOST2ARM4 +#define TYPHOON_REG_BOOT_DEST_ADDR TYPHOON_REG_HOST2ARM3 +#define TYPHOON_REG_BOOT_CHECKSUM TYPHOON_REG_HOST2ARM2 +#define TYPHOON_REG_BOOT_LENGTH TYPHOON_REG_HOST2ARM1 + +#define TYPHOON_REG_DOWNLOAD_BOOT_ADDR TYPHOON_REG_HOST2ARM1 +#define TYPHOON_REG_DOWNLOAD_HMAC_0 TYPHOON_REG_HOST2ARM2 +#define TYPHOON_REG_DOWNLOAD_HMAC_1 TYPHOON_REG_HOST2ARM3 +#define TYPHOON_REG_DOWNLOAD_HMAC_2 TYPHOON_REG_HOST2ARM4 +#define TYPHOON_REG_DOWNLOAD_HMAC_3 TYPHOON_REG_HOST2ARM5 +#define TYPHOON_REG_DOWNLOAD_HMAC_4 TYPHOON_REG_HOST2ARM6 + +#define TYPHOON_REG_BOOT_RECORD_ADDR_HI TYPHOON_REG_HOST2ARM2 +#define TYPHOON_REG_BOOT_RECORD_ADDR_LO TYPHOON_REG_HOST2ARM1 + +#define TYPHOON_REG_TX_LO_READY TYPHOON_REG_HOST2ARM3 +#define TYPHOON_REG_CMD_READY TYPHOON_REG_HOST2ARM2 +#define TYPHOON_REG_TX_HI_READY TYPHOON_REG_HOST2ARM1 + +#define TYPHOON_REG_COMMAND TYPHOON_REG_HOST2ARM0 +#define TYPHOON_REG_HEARTBEAT TYPHOON_REG_ARM2HOST3 +#define TYPHOON_REG_STATUS TYPHOON_REG_ARM2HOST0 + +/* 3XP Reset values (TYPHOON_REG_SOFT_RESET) + */ +#define TYPHOON_RESET_ALL 0x7f +#define TYPHOON_RESET_NONE 0x00 + +/* 3XP irq bits (TYPHOON_REG_INTR{STATUS,ENABLE,MASK}) + * + * Some of these came from OpenBSD, as the 3Com docs have it wrong + * (INTR_SELF) or don't list it at all (INTR_*_ABORT) + * + * Enabling irqs on the Heartbeat reg (ArmToHost3) gets you an irq + * about every 8ms, so don't do it. + */ +#define TYPHOON_INTR_HOST_INT 0x00000001 +#define TYPHOON_INTR_ARM2HOST0 0x00000002 +#define TYPHOON_INTR_ARM2HOST1 0x00000004 +#define TYPHOON_INTR_ARM2HOST2 0x00000008 +#define TYPHOON_INTR_ARM2HOST3 0x00000010 +#define TYPHOON_INTR_DMA0 0x00000020 +#define TYPHOON_INTR_DMA1 0x00000040 +#define TYPHOON_INTR_DMA2 0x00000080 +#define TYPHOON_INTR_DMA3 0x00000100 +#define TYPHOON_INTR_MASTER_ABORT 0x00000200 +#define TYPHOON_INTR_TARGET_ABORT 0x00000400 +#define TYPHOON_INTR_SELF 0x00000800 +#define TYPHOON_INTR_RESERVED 0xfffff000 + +#define TYPHOON_INTR_BOOTCMD TYPHOON_INTR_ARM2HOST0 + +#define TYPHOON_INTR_ENABLE_ALL 0xffffffef +#define TYPHOON_INTR_ALL 0xffffffff +#define TYPHOON_INTR_NONE 0x00000000 + +/* The commands for the 3XP chip (TYPHOON_REG_COMMAND) + */ +#define TYPHOON_BOOTCMD_BOOT 0x00 +#define TYPHOON_BOOTCMD_WAKEUP 0xfa +#define TYPHOON_BOOTCMD_DNLD_COMPLETE 0xfb +#define TYPHOON_BOOTCMD_SEG_AVAILABLE 0xfc +#define TYPHOON_BOOTCMD_RUNTIME_IMAGE 0xfd +#define TYPHOON_BOOTCMD_REG_BOOT_RECORD 0xff + +/* 3XP Status values (TYPHOON_REG_STATUS) + */ +#define TYPHOON_STATUS_WAITING_FOR_BOOT 0x07 +#define TYPHOON_STATUS_SECOND_INIT 0x08 +#define TYPHOON_STATUS_RUNNING 0x09 +#define TYPHOON_STATUS_WAITING_FOR_HOST 0x0d +#define TYPHOON_STATUS_WAITING_FOR_SEGMENT 0x10 +#define TYPHOON_STATUS_SLEEPING 0x11 +#define TYPHOON_STATUS_HALTED 0x14 diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index d59e4f2aa93f..18193ecd8cb6 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -11,4 +11,6 @@ menuconfig ETHERNET if ETHERNET +source "drivers/net/ethernet/3com/Kconfig" + endif # ETHERNET diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index 0d21dda32038..07766baf7920 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -1,3 +1,5 @@ # # Makefile for the Linux network Ethernet device drivers. # + +obj-$(CONFIG_NET_VENDOR_3COM) += 3com/ |