summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/renesas
diff options
context:
space:
mode:
authorYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>2019-05-28 13:10:46 +0900
committerDavid S. Miller <davem@davemloft.net>2019-05-29 13:24:54 -0700
commit315ca92dd863fecbffc0bb52ae0ac11e0398726a (patch)
tree9114a76e3fd5f6d478faa9f88e4900790b6155c9 /drivers/net/ethernet/renesas
parenta6cd0d2d493ab7806b49f738b4f66362437cc09e (diff)
downloadlinux-315ca92dd863fecbffc0bb52ae0ac11e0398726a.tar.bz2
net: sh_eth: fix mdio access in sh_eth_close() for R-Car Gen2 and RZ/A1 SoCs
The sh_eth_close() resets the MAC and then calls phy_stop() so that mdio read access result is incorrect without any error according to kernel trace like below: ifconfig-216 [003] .n.. 109.133124: mdio_access: ee700000.ethernet-ffffffff read phy:0x01 reg:0x00 val:0xffff According to the hardware manual, the RMII mode should be set to 1 before operation the Ethernet MAC. However, the previous code was not set to 1 after the driver issued the soft_reset in sh_eth_dev_exit() so that the mdio read access result seemed incorrect. To fix the issue, this patch adds a condition and set the RMII mode register in sh_eth_dev_exit() for R-Car Gen2 and RZ/A1 SoCs. Note that when I have tried to move the sh_eth_dev_exit() calling after phy_stop() on sh_eth_close(), but it gets worse (kernel panic happened and it seems that a register is accessed while the clock is off). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/renesas')
-rw-r--r--drivers/net/ethernet/renesas/sh_eth.c4
1 files changed, 4 insertions, 0 deletions
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 6354f19a31eb..7ba35a0bdb29 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1594,6 +1594,10 @@ static void sh_eth_dev_exit(struct net_device *ndev)
sh_eth_get_stats(ndev);
mdp->cd->soft_reset(ndev);
+ /* Set the RMII mode again if required */
+ if (mdp->cd->rmiimode)
+ sh_eth_write(ndev, 0x1, RMIIMODE);
+
/* Set MAC address again */
update_mac_address(ndev);
}