Merge 4.6-rc3 into staging-next

This resolves a lot of merge issues with PAGE_CACHE_* changes, and an
iio driver merge issue.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2 files changed, 21 insertions, 37 deletions

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 577f7ca7deba..7fc490225da5 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -260,7 +260,6 @@
 
 #define MVNETA_VLAN_TAG_LEN             4
 
-#define MVNETA_CPU_D_CACHE_LINE_SIZE    32
 #define MVNETA_TX_CSUM_DEF_SIZE		1600
 #define MVNETA_TX_CSUM_MAX_SIZE		9800
 #define MVNETA_ACC_MODE_EXT1		1
@@ -300,7 +299,7 @@
 #define MVNETA_RX_PKT_SIZE(mtu) \
 	ALIGN((mtu) + MVNETA_MH_SIZE + MVNETA_VLAN_TAG_LEN + \
 	      ETH_HLEN + ETH_FCS_LEN,			     \
-	      MVNETA_CPU_D_CACHE_LINE_SIZE)
+	      cache_line_size())
 
 #define IS_TSO_HEADER(txq, addr) \
 	((addr >= txq->tso_hdrs_phys) && \
@@ -2764,9 +2763,6 @@ static int mvneta_rxq_init(struct mvneta_port *pp,
 	if (rxq->descs == NULL)
 		return -ENOMEM;
 
-	BUG_ON(rxq->descs !=
-	       PTR_ALIGN(rxq->descs, MVNETA_CPU_D_CACHE_LINE_SIZE));
-
 	rxq->last_desc = rxq->size - 1;
 
 	/* Set Rx descriptors queue starting address */
@@ -2837,10 +2833,6 @@ static int mvneta_txq_init(struct mvneta_port *pp,
 	if (txq->descs == NULL)
 		return -ENOMEM;
 
-	/* Make sure descriptor address is cache line size aligned  */
-	BUG_ON(txq->descs !=
-	       PTR_ALIGN(txq->descs, MVNETA_CPU_D_CACHE_LINE_SIZE));
-
 	txq->last_desc = txq->size - 1;
 
 	/* Set maximum bandwidth for enabled TXQs */
@@ -3050,6 +3042,20 @@ static int mvneta_check_mtu_valid(struct net_device *dev, int mtu)
 	return mtu;
 }
 
+static void mvneta_percpu_enable(void *arg)
+{
+	struct mvneta_port *pp = arg;
+
+	enable_percpu_irq(pp->dev->irq, IRQ_TYPE_NONE);
+}
+
+static void mvneta_percpu_disable(void *arg)
+{
+	struct mvneta_port *pp = arg;
+
+	disable_percpu_irq(pp->dev->irq);
+}
+
 /* Change the device mtu */
 static int mvneta_change_mtu(struct net_device *dev, int mtu)
 {
@@ -3074,6 +3080,7 @@ static int mvneta_change_mtu(struct net_device *dev, int mtu)
 	 * reallocation of the queues
 	 */
 	mvneta_stop_dev(pp);
+	on_each_cpu(mvneta_percpu_disable, pp, true);
 
 	mvneta_cleanup_txqs(pp);
 	mvneta_cleanup_rxqs(pp);
@@ -3097,6 +3104,7 @@ static int mvneta_change_mtu(struct net_device *dev, int mtu)
 		return ret;
 	}
 
+	on_each_cpu(mvneta_percpu_enable, pp, true);
 	mvneta_start_dev(pp);
 	mvneta_port_up(pp);
 
@@ -3250,20 +3258,6 @@ static void mvneta_mdio_remove(struct mvneta_port *pp)
 	pp->phy_dev = NULL;
 }
 
-static void mvneta_percpu_enable(void *arg)
-{
-	struct mvneta_port *pp = arg;
-
-	enable_percpu_irq(pp->dev->irq, IRQ_TYPE_NONE);
-}
-
-static void mvneta_percpu_disable(void *arg)
-{
-	struct mvneta_port *pp = arg;
-
-	disable_percpu_irq(pp->dev->irq);
-}
-
 /* Electing a CPU must be done in an atomic way: it should be done
  * after or before the removal/insertion of a CPU and this function is
  * not reentrant.
diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c
index c797971aefab..868a957f24bb 100644
--- a/drivers/net/ethernet/marvell/mvpp2.c
+++ b/drivers/net/ethernet/marvell/mvpp2.c
@@ -321,7 +321,6 @@
 /* Lbtd 802.3 type */
 #define MVPP2_IP_LBDT_TYPE		0xfffa
 
-#define MVPP2_CPU_D_CACHE_LINE_SIZE	32
 #define MVPP2_TX_CSUM_MAX_SIZE		9800
 
 /* Timeout constants */
@@ -377,7 +376,7 @@
 
 #define MVPP2_RX_PKT_SIZE(mtu) \
 	ALIGN((mtu) + MVPP2_MH_SIZE + MVPP2_VLAN_TAG_LEN + \
-	      ETH_HLEN + ETH_FCS_LEN, MVPP2_CPU_D_CACHE_LINE_SIZE)
+	      ETH_HLEN + ETH_FCS_LEN, cache_line_size())
 
 #define MVPP2_RX_BUF_SIZE(pkt_size)	((pkt_size) + NET_SKB_PAD)
 #define MVPP2_RX_TOTAL_SIZE(buf_size)	((buf_size) + MVPP2_SKB_SHINFO_SIZE)
@@ -4493,10 +4492,6 @@ static int mvpp2_aggr_txq_init(struct platform_device *pdev,
 	if (!aggr_txq->descs)
 		return -ENOMEM;
 
-	/* Make sure descriptor address is cache line size aligned  */
-	BUG_ON(aggr_txq->descs !=
-	       PTR_ALIGN(aggr_txq->descs, MVPP2_CPU_D_CACHE_LINE_SIZE));
-
 	aggr_txq->last_desc = aggr_txq->size - 1;
 
 	/* Aggr TXQ no reset WA */
@@ -4526,9 +4521,6 @@ static int mvpp2_rxq_init(struct mvpp2_port *port,
 	if (!rxq->descs)
 		return -ENOMEM;
 
-	BUG_ON(rxq->descs !=
-	       PTR_ALIGN(rxq->descs, MVPP2_CPU_D_CACHE_LINE_SIZE));
-
 	rxq->last_desc = rxq->size - 1;
 
 	/* Zero occupied and non-occupied counters - direct access */
@@ -4616,10 +4608,6 @@ static int mvpp2_txq_init(struct mvpp2_port *port,
 	if (!txq->descs)
 		return -ENOMEM;
 
-	/* Make sure descriptor address is cache line size aligned  */
-	BUG_ON(txq->descs !=
-	       PTR_ALIGN(txq->descs, MVPP2_CPU_D_CACHE_LINE_SIZE));
-
 	txq->last_desc = txq->size - 1;
 
 	/* Set Tx descriptors queue starting address - indirect access */
@@ -6059,8 +6047,10 @@ static int mvpp2_port_init(struct mvpp2_port *port)
 
 		/* Map physical Rx queue to port's logical Rx queue */
 		rxq = devm_kzalloc(dev, sizeof(*rxq), GFP_KERNEL);
-		if (!rxq)
+		if (!rxq) {
+			err = -ENOMEM;
 			goto err_free_percpu;
+		}
 		/* Map this Rx queue to a physical queue */
 		rxq->id = port->first_rxq + queue;
 		rxq->port = port->id;