diff options
| author | Jarod Wilson <jarod@redhat.com> | 2016-10-17 15:54:05 -0400 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2016-10-18 11:34:18 -0400 |
| commit | 91c527a55664ddf4bee26673a35f91748dae4142 (patch) | |
| tree | 5182f5a33b97804b76af6e0906575dd0044b2e22 /drivers/net/ethernet/intel/ixgbe | |
| parent | e1c6dccaf3af291488fbad155d7ee6bc29db262a (diff) | |
| download | linux-91c527a55664ddf4bee26673a35f91748dae4142.tar.bz2 | |
ethernet/intel: use core min/max MTU checking
e100: min_mtu 68, max_mtu 1500
- remove e100_change_mtu entirely, is identical to old eth_change_mtu,
and no longer serves a purpose. No need to set min_mtu or max_mtu
explicitly, as ether_setup() will already set them to 68 and 1500.
e1000: min_mtu 46, max_mtu 16110
e1000e: min_mtu 68, max_mtu varies based on adapter
fm10k: min_mtu 68, max_mtu 15342
- remove fm10k_change_mtu entirely, does nothing now
i40e: min_mtu 68, max_mtu 9706
i40evf: min_mtu 68, max_mtu 9706
igb: min_mtu 68, max_mtu 9216
- There are two different "max" frame sizes claimed and both checked in
the driver, the larger value wasn't relevant though, so I've set max_mtu
to the smaller of the two values here to retain identical behavior.
igbvf: min_mtu 68, max_mtu 9216
- Same issue as igb duplicated
ixgb: min_mtu 68, max_mtu 16114
- Also remove pointless old == new check, as that's done in dev_set_mtu
ixgbe: min_mtu 68, max_mtu 9710
ixgbevf: min_mtu 68, max_mtu dependent on hardware/firmware
- Some hw can only handle up to max_mtu 1504 on a vf, others 9710
CC: netdev@vger.kernel.org
CC: intel-wired-lan@lists.osuosl.org
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 11 |
1 files changed, 5 insertions, 6 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 784b0b98ab2f..7dfde209b0e0 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -6049,11 +6049,6 @@ static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter) static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu) { struct ixgbe_adapter *adapter = netdev_priv(netdev); - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; - - /* MTU < 68 is an error and causes problems on some kernels */ - if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE)) - return -EINVAL; /* * For 82599EB we cannot allow legacy VFs to enable their receive @@ -6062,7 +6057,7 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu) */ if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) && (adapter->hw.mac.type == ixgbe_mac_82599EB) && - (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN))) + (new_mtu > ETH_DATA_LEN)) e_warn(probe, "Setting MTU > 1500 will disable legacy VFs\n"); e_info(probe, "changing MTU from %d to %d\n", netdev->mtu, new_mtu); @@ -9608,6 +9603,10 @@ skip_sriov: netdev->priv_flags |= IFF_UNICAST_FLT; netdev->priv_flags |= IFF_SUPP_NOFCS; + /* MTU range: 68 - 9710 */ + netdev->min_mtu = ETH_MIN_MTU; + netdev->max_mtu = IXGBE_MAX_JUMBO_FRAME_SIZE - (ETH_HLEN + ETH_FCS_LEN); + #ifdef CONFIG_IXGBE_DCB if (adapter->flags & IXGBE_FLAG_DCB_CAPABLE) netdev->dcbnl_ops = &dcbnl_ops; |