diff options
author | Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> | 2018-03-20 07:58:13 -0700 |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2018-03-26 11:18:36 -0700 |
commit | cdedef59deb020e78721d820a5692100128c8c73 (patch) | |
tree | 2bdeeb20d1fadea63eb26501b64bc6eee455f6e8 /drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h | |
parent | 9daf8208dd4dee4e13079bd0520a5fb8d20e8b06 (diff) | |
download | linux-cdedef59deb020e78721d820a5692100128c8c73.tar.bz2 |
ice: Configure VSIs for Tx/Rx
This patch configures the VSIs to be able to send and receive
packets by doing the following:
1) Initialize flexible parser to extract and include certain
fields in the Rx descriptor.
2) Add Tx queues by programming the Tx queue context (implemented in
ice_vsi_cfg_txqs). Note that adding the queues also enables (starts)
the queues.
3) Add Rx queues by programming Rx queue context (implemented in
ice_vsi_cfg_rxqs). Note that this only adds queues but doesn't start
them. The rings will be started by calling ice_vsi_start_rx_rings on
interface up.
4) Configure interrupts for VSI queues.
5) Implement ice_open and ice_stop.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h')
-rw-r--r-- | drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h | 246 |
1 files changed, 246 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h b/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h new file mode 100644 index 000000000000..3c1aeb74d950 --- /dev/null +++ b/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h @@ -0,0 +1,246 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2018, Intel Corporation. */ + +#ifndef _ICE_LAN_TX_RX_H_ +#define _ICE_LAN_TX_RX_H_ + +union ice_32byte_rx_desc { + struct { + __le64 pkt_addr; /* Packet buffer address */ + __le64 hdr_addr; /* Header buffer address */ + /* bit 0 of hdr_addr is DD bit */ + __le64 rsvd1; + __le64 rsvd2; + } read; + struct { + struct { + struct { + __le16 mirroring_status; + __le16 l2tag1; + } lo_dword; + union { + __le32 rss; /* RSS Hash */ + __le32 fd_id; /* Flow Director filter id */ + } hi_dword; + } qword0; + struct { + /* status/error/PTYPE/length */ + __le64 status_error_len; + } qword1; + struct { + __le16 ext_status; /* extended status */ + __le16 rsvd; + __le16 l2tag2_1; + __le16 l2tag2_2; + } qword2; + struct { + __le32 reserved; + __le32 fd_id; + } qword3; + } wb; /* writeback */ +}; + +/* RX Flex Descriptor + * This descriptor is used instead of the legacy version descriptor when + * ice_rlan_ctx.adv_desc is set + */ +union ice_32b_rx_flex_desc { + struct { + __le64 pkt_addr; /* Packet buffer address */ + __le64 hdr_addr; /* Header buffer address */ + /* bit 0 of hdr_addr is DD bit */ + __le64 rsvd1; + __le64 rsvd2; + } read; + struct { + /* Qword 0 */ + u8 rxdid; /* descriptor builder profile id */ + u8 mir_id_umb_cast; /* mirror=[5:0], umb=[7:6] */ + __le16 ptype_flex_flags0; /* ptype=[9:0], ff0=[15:10] */ + __le16 pkt_len; /* [15:14] are reserved */ + __le16 hdr_len_sph_flex_flags1; /* header=[10:0] */ + /* sph=[11:11] */ + /* ff1/ext=[15:12] */ + + /* Qword 1 */ + __le16 status_error0; + __le16 l2tag1; + __le16 flex_meta0; + __le16 flex_meta1; + + /* Qword 2 */ + __le16 status_error1; + u8 flex_flags2; + u8 time_stamp_low; + __le16 l2tag2_1st; + __le16 l2tag2_2nd; + + /* Qword 3 */ + __le16 flex_meta2; + __le16 flex_meta3; + union { + struct { + __le16 flex_meta4; + __le16 flex_meta5; + } flex; + __le32 ts_high; + } flex_ts; + } wb; /* writeback */ +}; + +/* Receive Flex Descriptor profile IDs: There are a total + * of 64 profiles where profile IDs 0/1 are for legacy; and + * profiles 2-63 are flex profiles that can be programmed + * with a specific metadata (profile 7 reserved for HW) + */ +enum ice_rxdid { + ICE_RXDID_START = 0, + ICE_RXDID_LEGACY_0 = ICE_RXDID_START, + ICE_RXDID_LEGACY_1, + ICE_RXDID_FLX_START, + ICE_RXDID_FLEX_NIC = ICE_RXDID_FLX_START, + ICE_RXDID_FLX_LAST = 63, + ICE_RXDID_LAST = ICE_RXDID_FLX_LAST +}; + +/* Receive Flex Descriptor Rx opcode values */ +#define ICE_RX_OPC_MDID 0x01 + +/* Receive Descriptor MDID values */ +#define ICE_RX_MDID_FLOW_ID_LOWER 5 +#define ICE_RX_MDID_FLOW_ID_HIGH 6 +#define ICE_RX_MDID_HASH_LOW 56 +#define ICE_RX_MDID_HASH_HIGH 57 + +/* Rx Flag64 packet flag bits */ +enum ice_rx_flg64_bits { + ICE_RXFLG_PKT_DSI = 0, + ICE_RXFLG_EVLAN_x8100 = 15, + ICE_RXFLG_EVLAN_x9100, + ICE_RXFLG_VLAN_x8100, + ICE_RXFLG_TNL_MAC = 22, + ICE_RXFLG_TNL_VLAN, + ICE_RXFLG_PKT_FRG, + ICE_RXFLG_FIN = 32, + ICE_RXFLG_SYN, + ICE_RXFLG_RST, + ICE_RXFLG_TNL0 = 38, + ICE_RXFLG_TNL1, + ICE_RXFLG_TNL2, + ICE_RXFLG_UDP_GRE, + ICE_RXFLG_RSVD = 63 +}; + +#define ICE_RXQ_CTX_SIZE_DWORDS 8 +#define ICE_RXQ_CTX_SZ (ICE_RXQ_CTX_SIZE_DWORDS * sizeof(u32)) + +/* RLAN Rx queue context data + * + * The sizes of the variables may be larger than needed due to crossing byte + * boundaries. If we do not have the width of the variable set to the correct + * size then we could end up shifting bits off the top of the variable when the + * variable is at the top of a byte and crosses over into the next byte. + */ +struct ice_rlan_ctx { + u16 head; + u16 cpuid; /* bigger than needed, see above for reason */ + u64 base; + u16 qlen; +#define ICE_RLAN_CTX_DBUF_S 7 + u16 dbuf; /* bigger than needed, see above for reason */ +#define ICE_RLAN_CTX_HBUF_S 6 + u16 hbuf; /* bigger than needed, see above for reason */ + u8 dtype; + u8 dsize; + u8 crcstrip; + u8 l2tsel; + u8 hsplit_0; + u8 hsplit_1; + u8 showiv; + u32 rxmax; /* bigger than needed, see above for reason */ + u8 tphrdesc_ena; + u8 tphwdesc_ena; + u8 tphdata_ena; + u8 tphhead_ena; + u16 lrxqthresh; /* bigger than needed, see above for reason */ +}; + +struct ice_ctx_ele { + u16 offset; + u16 size_of; + u16 width; + u16 lsb; +}; + +#define ICE_CTX_STORE(_struct, _ele, _width, _lsb) { \ + .offset = offsetof(struct _struct, _ele), \ + .size_of = FIELD_SIZEOF(struct _struct, _ele), \ + .width = _width, \ + .lsb = _lsb, \ +} + +/* for hsplit_0 field of Rx RLAN context */ +enum ice_rlan_ctx_rx_hsplit_0 { + ICE_RLAN_RX_HSPLIT_0_NO_SPLIT = 0, + ICE_RLAN_RX_HSPLIT_0_SPLIT_L2 = 1, + ICE_RLAN_RX_HSPLIT_0_SPLIT_IP = 2, + ICE_RLAN_RX_HSPLIT_0_SPLIT_TCP_UDP = 4, + ICE_RLAN_RX_HSPLIT_0_SPLIT_SCTP = 8, +}; + +/* for hsplit_1 field of Rx RLAN context */ +enum ice_rlan_ctx_rx_hsplit_1 { + ICE_RLAN_RX_HSPLIT_1_NO_SPLIT = 0, + ICE_RLAN_RX_HSPLIT_1_SPLIT_L2 = 1, + ICE_RLAN_RX_HSPLIT_1_SPLIT_ALWAYS = 2, +}; + +/* TX Descriptor */ +struct ice_tx_desc { + __le64 buf_addr; /* Address of descriptor's data buf */ + __le64 cmd_type_offset_bsz; +}; + +#define ICE_LAN_TXQ_MAX_QGRPS 127 +#define ICE_LAN_TXQ_MAX_QDIS 1023 + +/* Tx queue context data + * + * The sizes of the variables may be larger than needed due to crossing byte + * boundaries. If we do not have the width of the variable set to the correct + * size then we could end up shifting bits off the top of the variable when the + * variable is at the top of a byte and crosses over into the next byte. + */ +struct ice_tlan_ctx { +#define ICE_TLAN_CTX_BASE_S 7 + u64 base; /* base is defined in 128-byte units */ + u8 port_num; + u16 cgd_num; /* bigger than needed, see above for reason */ + u8 pf_num; + u16 vmvf_num; + u8 vmvf_type; +#define ICE_TLAN_CTX_VMVF_TYPE_VMQ 1 +#define ICE_TLAN_CTX_VMVF_TYPE_PF 2 + u16 src_vsi; + u8 tsyn_ena; + u8 alt_vlan; + u16 cpuid; /* bigger than needed, see above for reason */ + u8 wb_mode; + u8 tphrd_desc; + u8 tphrd; + u8 tphwr_desc; + u16 cmpq_id; + u16 qnum_in_func; + u8 itr_notification_mode; + u8 adjust_prof_id; + u32 qlen; /* bigger than needed, see above for reason */ + u8 quanta_prof_idx; + u8 tso_ena; + u16 tso_qnum; + u8 legacy_int; + u8 drop_ena; + u8 cache_prof_idx; + u8 pkt_shaper_prof_idx; + u8 int_q_state; /* width not needed - internal do not write */ +}; +#endif /* _ICE_LAN_TX_RX_H_ */ |