ice: add TTY for GNSS module for E810T device

Add a new ice_gnss.c file for holding the basic GNSS module functions.
If the device supports GNSS module, call the new ice_gnss_init and
ice_gnss_release functions where appropriate.

Implement basic functionality for reading the data from GNSS module
using TTY device.

Add I2C read AQ command. It is now required for controlling the external
physical connectors via external I2C port expander on E810-T adapters.

Future changes will introduce write functionality.

Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Sudhansu Sekhar Mishra <sudhansu.mishra@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 53 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index 0e4434e3c290..9619bdb9e49a 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -4798,6 +4798,59 @@ ice_sched_query_elem(struct ice_hw *hw, u32 node_teid,
 }
 
 /**
+ * ice_aq_read_i2c
+ * @hw: pointer to the hw struct
+ * @topo_addr: topology address for a device to communicate with
+ * @bus_addr: 7-bit I2C bus address
+ * @addr: I2C memory address (I2C offset) with up to 16 bits
+ * @params: I2C parameters: bit [7] - Repeated start,
+ *			    bits [6:5] data offset size,
+ *			    bit [4] - I2C address type,
+ *			    bits [3:0] - data size to read (0-16 bytes)
+ * @data: pointer to data (0 to 16 bytes) to be read from the I2C device
+ * @cd: pointer to command details structure or NULL
+ *
+ * Read I2C (0x06E2)
+ */
+int
+ice_aq_read_i2c(struct ice_hw *hw, struct ice_aqc_link_topo_addr topo_addr,
+		u16 bus_addr, __le16 addr, u8 params, u8 *data,
+		struct ice_sq_cd *cd)
+{
+	struct ice_aq_desc desc = { 0 };
+	struct ice_aqc_i2c *cmd;
+	u8 data_size;
+	int status;
+
+	ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_read_i2c);
+	cmd = &desc.params.read_i2c;
+
+	if (!data)
+		return -EINVAL;
+
+	data_size = FIELD_GET(ICE_AQC_I2C_DATA_SIZE_M, params);
+
+	cmd->i2c_bus_addr = cpu_to_le16(bus_addr);
+	cmd->topo_addr = topo_addr;
+	cmd->i2c_params = params;
+	cmd->i2c_addr = addr;
+
+	status = ice_aq_send_cmd(hw, &desc, NULL, 0, cd);
+	if (!status) {
+		struct ice_aqc_read_i2c_resp *resp;
+		u8 i;
+
+		resp = &desc.params.read_i2c_resp;
+		for (i = 0; i < data_size; i++) {
+			*data = resp->i2c_data[i];
+			data++;
+		}
+	}
+
+	return status;
+}
+
+/**
  * ice_aq_set_driver_param - Set driver parameter to share via firmware
  * @hw: pointer to the HW struct
  * @idx: parameter index to set