summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/dec/tulip/de4x5.c
diff options
context:
space:
mode:
authorJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-05-20 07:15:19 -0700
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-08-12 00:21:25 -0700
commita88394cfb58007cca945699545469017beb0d206 (patch)
tree7efa1efcaf18d1b8f7bede1f25acdfc0c657c086 /drivers/net/ethernet/dec/tulip/de4x5.c
parent5ff2241dd42ade03572753f9ed7743719b47c474 (diff)
downloadlinux-a88394cfb58007cca945699545469017beb0d206.tar.bz2
ewrk3/tulip: Move the DEC - Tulip drivers
Move the DEC - Tulip driver into drivers/net/ethernet/dec/tulip/ and make the necessary Kconfig and Makefile changes. The Digital Equioment (DEC) driver ewrk3 was moved into drivers/net/ethernet/dec/ and the remaining drivers (Tulip) were moved into drivers/net/ethernet/dec/tulip/ CC: Tobias Ringstrom <tori@unhappy.mine.nu> CC: Grant Grundler <grundler@parisc-linux.org> CC: David Davies <davies@maniac.ultranet.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Grant Grundler <grundler@parisc-linux.org>
Diffstat (limited to 'drivers/net/ethernet/dec/tulip/de4x5.c')
-rw-r--r--drivers/net/ethernet/dec/tulip/de4x5.c5599
1 files changed, 5599 insertions, 0 deletions
diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c
new file mode 100644
index 000000000000..959b41021a65
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/de4x5.c
@@ -0,0 +1,5599 @@
+/* de4x5.c: A DIGITAL DC21x4x DECchip and DE425/DE434/DE435/DE450/DE500
+ ethernet driver for Linux.
+
+ Copyright 1994, 1995 Digital Equipment Corporation.
+
+ Testing resources for this driver have been made available
+ in part by NASA Ames Research Center (mjacob@nas.nasa.gov).
+
+ The author may be reached at davies@maniac.ultranet.com.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by the
+ Free Software Foundation; either version 2 of the License, or (at your
+ option) any later version.
+
+ THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ Originally, this driver was written for the Digital Equipment
+ Corporation series of EtherWORKS ethernet cards:
+
+ DE425 TP/COAX EISA
+ DE434 TP PCI
+ DE435 TP/COAX/AUI PCI
+ DE450 TP/COAX/AUI PCI
+ DE500 10/100 PCI Fasternet
+
+ but it will now attempt to support all cards which conform to the
+ Digital Semiconductor SROM Specification. The driver currently
+ recognises the following chips:
+
+ DC21040 (no SROM)
+ DC21041[A]
+ DC21140[A]
+ DC21142
+ DC21143
+
+ So far the driver is known to work with the following cards:
+
+ KINGSTON
+ Linksys
+ ZNYX342
+ SMC8432
+ SMC9332 (w/new SROM)
+ ZNYX31[45]
+ ZNYX346 10/100 4 port (can act as a 10/100 bridge!)
+
+ The driver has been tested on a relatively busy network using the DE425,
+ DE434, DE435 and DE500 cards and benchmarked with 'ttcp': it transferred
+ 16M of data to a DECstation 5000/200 as follows:
+
+ TCP UDP
+ TX RX TX RX
+ DE425 1030k 997k 1170k 1128k
+ DE434 1063k 995k 1170k 1125k
+ DE435 1063k 995k 1170k 1125k
+ DE500 1063k 998k 1170k 1125k in 10Mb/s mode
+
+ All values are typical (in kBytes/sec) from a sample of 4 for each
+ measurement. Their error is +/-20k on a quiet (private) network and also
+ depend on what load the CPU has.
+
+ =========================================================================
+ This driver has been written substantially from scratch, although its
+ inheritance of style and stack interface from 'ewrk3.c' and in turn from
+ Donald Becker's 'lance.c' should be obvious. With the module autoload of
+ every usable DECchip board, I pinched Donald's 'next_module' field to
+ link my modules together.
+
+ Up to 15 EISA cards can be supported under this driver, limited primarily
+ by the available IRQ lines. I have checked different configurations of
+ multiple depca, EtherWORKS 3 cards and de4x5 cards and have not found a
+ problem yet (provided you have at least depca.c v0.38) ...
+
+ PCI support has been added to allow the driver to work with the DE434,
+ DE435, DE450 and DE500 cards. The I/O accesses are a bit of a kludge due
+ to the differences in the EISA and PCI CSR address offsets from the base
+ address.
+
+ The ability to load this driver as a loadable module has been included
+ and used extensively during the driver development (to save those long
+ reboot sequences). Loadable module support under PCI and EISA has been
+ achieved by letting the driver autoprobe as if it were compiled into the
+ kernel. Do make sure you're not sharing interrupts with anything that
+ cannot accommodate interrupt sharing!
+
+ To utilise this ability, you have to do 8 things:
+
+ 0) have a copy of the loadable modules code installed on your system.
+ 1) copy de4x5.c from the /linux/drivers/net directory to your favourite
+ temporary directory.
+ 2) for fixed autoprobes (not recommended), edit the source code near
+ line 5594 to reflect the I/O address you're using, or assign these when
+ loading by:
+
+ insmod de4x5 io=0xghh where g = bus number
+ hh = device number
+
+ NB: autoprobing for modules is now supported by default. You may just
+ use:
+
+ insmod de4x5
+
+ to load all available boards. For a specific board, still use
+ the 'io=?' above.
+ 3) compile de4x5.c, but include -DMODULE in the command line to ensure
+ that the correct bits are compiled (see end of source code).
+ 4) if you are wanting to add a new card, goto 5. Otherwise, recompile a
+ kernel with the de4x5 configuration turned off and reboot.
+ 5) insmod de4x5 [io=0xghh]
+ 6) run the net startup bits for your new eth?? interface(s) manually
+ (usually /etc/rc.inet[12] at boot time).
+ 7) enjoy!
+
+ To unload a module, turn off the associated interface(s)
+ 'ifconfig eth?? down' then 'rmmod de4x5'.
+
+ Automedia detection is included so that in principal you can disconnect
+ from, e.g. TP, reconnect to BNC and things will still work (after a
+ pause whilst the driver figures out where its media went). My tests
+ using ping showed that it appears to work....
+
+ By default, the driver will now autodetect any DECchip based card.
+ Should you have a need to restrict the driver to DIGITAL only cards, you
+ can compile with a DEC_ONLY define, or if loading as a module, use the
+ 'dec_only=1' parameter.
+
+ I've changed the timing routines to use the kernel timer and scheduling
+ functions so that the hangs and other assorted problems that occurred
+ while autosensing the media should be gone. A bonus for the DC21040
+ auto media sense algorithm is that it can now use one that is more in
+ line with the rest (the DC21040 chip doesn't have a hardware timer).
+ The downside is the 1 'jiffies' (10ms) resolution.
+
+ IEEE 802.3u MII interface code has been added in anticipation that some
+ products may use it in the future.
+
+ The SMC9332 card has a non-compliant SROM which needs fixing - I have
+ patched this driver to detect it because the SROM format used complies
+ to a previous DEC-STD format.
+
+ I have removed the buffer copies needed for receive on Intels. I cannot
+ remove them for Alphas since the Tulip hardware only does longword
+ aligned DMA transfers and the Alphas get alignment traps with non
+ longword aligned data copies (which makes them really slow). No comment.
+
+ I have added SROM decoding routines to make this driver work with any
+ card that supports the Digital Semiconductor SROM spec. This will help
+ all cards running the dc2114x series chips in particular. Cards using
+ the dc2104x chips should run correctly with the basic driver. I'm in
+ debt to <mjacob@feral.com> for the testing and feedback that helped get
+ this feature working. So far we have tested KINGSTON, SMC8432, SMC9332
+ (with the latest SROM complying with the SROM spec V3: their first was
+ broken), ZNYX342 and LinkSys. ZYNX314 (dual 21041 MAC) and ZNYX 315
+ (quad 21041 MAC) cards also appear to work despite their incorrectly
+ wired IRQs.
+
+ I have added a temporary fix for interrupt problems when some SCSI cards
+ share the same interrupt as the DECchip based cards. The problem occurs
+ because the SCSI card wants to grab the interrupt as a fast interrupt
+ (runs the service routine with interrupts turned off) vs. this card
+ which really needs to run the service routine with interrupts turned on.
+ This driver will now add the interrupt service routine as a fast
+ interrupt if it is bounced from the slow interrupt. THIS IS NOT A
+ RECOMMENDED WAY TO RUN THE DRIVER and has been done for a limited time
+ until people sort out their compatibility issues and the kernel
+ interrupt service code is fixed. YOU SHOULD SEPARATE OUT THE FAST
+ INTERRUPT CARDS FROM THE SLOW INTERRUPT CARDS to ensure that they do not
+ run on the same interrupt. PCMCIA/CardBus is another can of worms...
+
+ Finally, I think I have really fixed the module loading problem with
+ more than one DECchip based card. As a side effect, I don't mess with
+ the device structure any more which means that if more than 1 card in
+ 2.0.x is installed (4 in 2.1.x), the user will have to edit
+ linux/drivers/net/Space.c to make room for them. Hence, module loading
+ is the preferred way to use this driver, since it doesn't have this
+ limitation.
+
+ Where SROM media detection is used and full duplex is specified in the
+ SROM, the feature is ignored unless lp->params.fdx is set at compile
+ time OR during a module load (insmod de4x5 args='eth??:fdx' [see
+ below]). This is because there is no way to automatically detect full
+ duplex links except through autonegotiation. When I include the
+ autonegotiation feature in the SROM autoconf code, this detection will
+ occur automatically for that case.
+
+ Command line arguments are now allowed, similar to passing arguments
+ through LILO. This will allow a per adapter board set up of full duplex
+ and media. The only lexical constraints are: the board name (dev->name)
+ appears in the list before its parameters. The list of parameters ends
+ either at the end of the parameter list or with another board name. The
+ following parameters are allowed:
+
+ fdx for full duplex
+ autosense to set the media/speed; with the following
+ sub-parameters:
+ TP, TP_NW, BNC, AUI, BNC_AUI, 100Mb, 10Mb, AUTO
+
+ Case sensitivity is important for the sub-parameters. They *must* be
+ upper case. Examples:
+
+ insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'.
+
+ For a compiled in driver, at or above line 548, place e.g.
+ #define DE4X5_PARM "eth0:fdx autosense=AUI eth2:autosense=TP"
+
+ Yes, I know full duplex isn't permissible on BNC or AUI; they're just
+ examples. By default, full duplex is turned off and AUTO is the default
+ autosense setting. In reality, I expect only the full duplex option to
+ be used. Note the use of single quotes in the two examples above and the
+ lack of commas to separate items. ALSO, you must get the requested media
+ correct in relation to what the adapter SROM says it has. There's no way
+ to determine this in advance other than by trial and error and common
+ sense, e.g. call a BNC connectored port 'BNC', not '10Mb'.
+
+ Changed the bus probing. EISA used to be done first, followed by PCI.
+ Most people probably don't even know what a de425 is today and the EISA
+ probe has messed up some SCSI cards in the past, so now PCI is always
+ probed first followed by EISA if a) the architecture allows EISA and
+ either b) there have been no PCI cards detected or c) an EISA probe is
+ forced by the user. To force a probe include "force_eisa" in your
+ insmod "args" line; for built-in kernels either change the driver to do
+ this automatically or include #define DE4X5_FORCE_EISA on or before
+ line 1040 in the driver.
+
+ TO DO:
+ ------
+
+ Revision History
+ ----------------
+
+ Version Date Description
+
+ 0.1 17-Nov-94 Initial writing. ALPHA code release.
+ 0.2 13-Jan-95 Added PCI support for DE435's.
+ 0.21 19-Jan-95 Added auto media detection.
+ 0.22 10-Feb-95 Fix interrupt handler call <chris@cosy.sbg.ac.at>.
+ Fix recognition bug reported by <bkm@star.rl.ac.uk>.
+ Add request/release_region code.
+ Add loadable modules support for PCI.
+ Clean up loadable modules support.
+ 0.23 28-Feb-95 Added DC21041 and DC21140 support.
+ Fix missed frame counter value and initialisation.
+ Fixed EISA probe.
+ 0.24 11-Apr-95 Change delay routine to use <linux/udelay>.
+ Change TX_BUFFS_AVAIL macro.
+ Change media autodetection to allow manual setting.
+ Completed DE500 (DC21140) support.
+ 0.241 18-Apr-95 Interim release without DE500 Autosense Algorithm.
+ 0.242 10-May-95 Minor changes.
+ 0.30 12-Jun-95 Timer fix for DC21140.
+ Portability changes.
+ Add ALPHA changes from <jestabro@ant.tay1.dec.com>.
+ Add DE500 semi automatic autosense.
+ Add Link Fail interrupt TP failure detection.
+ Add timer based link change detection.
+ Plugged a memory leak in de4x5_queue_pkt().
+ 0.31 13-Jun-95 Fixed PCI stuff for 1.3.1.
+ 0.32 26-Jun-95 Added verify_area() calls in de4x5_ioctl() from a
+ suggestion by <heiko@colossus.escape.de>.
+ 0.33 8-Aug-95 Add shared interrupt support (not released yet).
+ 0.331 21-Aug-95 Fix de4x5_open() with fast CPUs.
+ Fix de4x5_interrupt().
+ Fix dc21140_autoconf() mess.
+ No shared interrupt support.
+ 0.332 11-Sep-95 Added MII management interface routines.
+ 0.40 5-Mar-96 Fix setup frame timeout <maartenb@hpkuipc.cern.ch>.
+ Add kernel timer code (h/w is too flaky).
+ Add MII based PHY autosense.
+ Add new multicasting code.
+ Add new autosense algorithms for media/mode
+ selection using kernel scheduling/timing.
+ Re-formatted.
+ Made changes suggested by <jeff@router.patch.net>:
+ Change driver to detect all DECchip based cards
+ with DEC_ONLY restriction a special case.
+ Changed driver to autoprobe as a module. No irq
+ checking is done now - assume BIOS is good!
+ Added SMC9332 detection <manabe@Roy.dsl.tutics.ac.jp>
+ 0.41 21-Mar-96 Don't check for get_hw_addr checksum unless DEC card
+ only <niles@axp745gsfc.nasa.gov>
+ Fix for multiple PCI cards reported by <jos@xos.nl>
+ Duh, put the IRQF_SHARED flag into request_interrupt().
+ Fix SMC ethernet address in enet_det[].
+ Print chip name instead of "UNKNOWN" during boot.
+ 0.42 26-Apr-96 Fix MII write TA bit error.
+ Fix bug in dc21040 and dc21041 autosense code.
+ Remove buffer copies on receive for Intels.
+ Change sk_buff handling during media disconnects to
+ eliminate DUP packets.
+ Add dynamic TX thresholding.
+ Change all chips to use perfect multicast filtering.
+ Fix alloc_device() bug <jari@markkus2.fimr.fi>
+ 0.43 21-Jun-96 Fix unconnected media TX retry bug.
+ Add Accton to the list of broken cards.
+ Fix TX under-run bug for non DC21140 chips.
+ Fix boot command probe bug in alloc_device() as
+ reported by <koen.gadeyne@barco.com> and
+ <orava@nether.tky.hut.fi>.
+ Add cache locks to prevent a race condition as
+ reported by <csd@microplex.com> and
+ <baba@beckman.uiuc.edu>.
+ Upgraded alloc_device() code.
+ 0.431 28-Jun-96 Fix potential bug in queue_pkt() from discussion
+ with <csd@microplex.com>
+ 0.44 13-Aug-96 Fix RX overflow bug in 2114[023] chips.
+ Fix EISA probe bugs reported by <os2@kpi.kharkov.ua>
+ and <michael@compurex.com>.
+ 0.441 9-Sep-96 Change dc21041_autoconf() to probe quiet BNC media
+ with a loopback packet.
+ 0.442 9-Sep-96 Include AUI in dc21041 media printout. Bug reported
+ by <bhat@mundook.cs.mu.OZ.AU>
+ 0.45 8-Dec-96 Include endian functions for PPC use, from work
+ by <cort@cs.nmt.edu> and <g.thomas@opengroup.org>.
+ 0.451 28-Dec-96 Added fix to allow autoprobe for modules after
+ suggestion from <mjacob@feral.com>.
+ 0.5 30-Jan-97 Added SROM decoding functions.
+ Updated debug flags.
+ Fix sleep/wakeup calls for PCI cards, bug reported
+ by <cross@gweep.lkg.dec.com>.
+ Added multi-MAC, one SROM feature from discussion
+ with <mjacob@feral.com>.
+ Added full module autoprobe capability.
+ Added attempt to use an SMC9332 with broken SROM.
+ Added fix for ZYNX multi-mac cards that didn't
+ get their IRQs wired correctly.
+ 0.51 13-Feb-97 Added endian fixes for the SROM accesses from
+ <paubert@iram.es>
+ Fix init_connection() to remove extra device reset.
+ Fix MAC/PHY reset ordering in dc21140m_autoconf().
+ Fix initialisation problem with lp->timeout in
+ typeX_infoblock() from <paubert@iram.es>.
+ Fix MII PHY reset problem from work done by
+ <paubert@iram.es>.
+ 0.52 26-Apr-97 Some changes may not credit the right people -
+ a disk crash meant I lost some mail.
+ Change RX interrupt routine to drop rather than
+ defer packets to avoid hang reported by
+ <g.thomas@opengroup.org>.
+ Fix srom_exec() to return for COMPACT and type 1
+ infoblocks.
+ Added DC21142 and DC21143 functions.
+ Added byte counters from <phil@tazenda.demon.co.uk>
+ Added IRQF_DISABLED temporary fix from
+ <mjacob@feral.com>.
+ 0.53 12-Nov-97 Fix the *_probe() to include 'eth??' name during
+ module load: bug reported by
+ <Piete.Brooks@cl.cam.ac.uk>
+ Fix multi-MAC, one SROM, to work with 2114x chips:
+ bug reported by <cmetz@inner.net>.
+ Make above search independent of BIOS device scan
+ direction.
+ Completed DC2114[23] autosense functions.
+ 0.531 21-Dec-97 Fix DE500-XA 100Mb/s bug reported by
+ <robin@intercore.com
+ Fix type1_infoblock() bug introduced in 0.53, from
+ problem reports by
+ <parmee@postecss.ncrfran.france.ncr.com> and
+ <jo@ice.dillingen.baynet.de>.
+ Added argument list to set up each board from either
+ a module's command line or a compiled in #define.
+ Added generic MII PHY functionality to deal with
+ newer PHY chips.
+ Fix the mess in 2.1.67.
+ 0.532 5-Jan-98 Fix bug in mii_get_phy() reported by
+ <redhat@cococo.net>.
+ Fix bug in pci_probe() for 64 bit systems reported
+ by <belliott@accessone.com>.
+ 0.533 9-Jan-98 Fix more 64 bit bugs reported by <jal@cs.brown.edu>.
+ 0.534 24-Jan-98 Fix last (?) endian bug from <geert@linux-m68k.org>
+ 0.535 21-Feb-98 Fix Ethernet Address PROM reset bug for DC21040.
+ 0.536 21-Mar-98 Change pci_probe() to use the pci_dev structure.
+ **Incompatible with 2.0.x from here.**
+ 0.540 5-Jul-98 Atomicize assertion of dev->interrupt for SMP
+ from <lma@varesearch.com>
+ Add TP, AUI and BNC cases to 21140m_autoconf() for
+ case where a 21140 under SROM control uses, e.g. AUI
+ from problem report by <delchini@lpnp09.in2p3.fr>
+ Add MII parallel detection to 2114x_autoconf() for
+ case where no autonegotiation partner exists from
+ problem report by <mlapsley@ndirect.co.uk>.
+ Add ability to force connection type directly even
+ when using SROM control from problem report by
+ <earl@exis.net>.
+ Updated the PCI interface to conform with the latest
+ version. I hope nothing is broken...
+ Add TX done interrupt modification from suggestion
+ by <Austin.Donnelly@cl.cam.ac.uk>.
+ Fix is_anc_capable() bug reported by
+ <Austin.Donnelly@cl.cam.ac.uk>.
+ Fix type[13]_infoblock() bug: during MII search, PHY
+ lp->rst not run because lp->ibn not initialised -
+ from report & fix by <paubert@iram.es>.
+ Fix probe bug with EISA & PCI cards present from
+ report by <eirik@netcom.com>.
+ 0.541 24-Aug-98 Fix compiler problems associated with i386-string
+ ops from multiple bug reports and temporary fix
+ from <paubert@iram.es>.
+ Fix pci_probe() to correctly emulate the old
+ pcibios_find_class() function.
+ Add an_exception() for old ZYNX346 and fix compile
+ warning on PPC & SPARC, from <ecd@skynet.be>.
+ Fix lastPCI to correctly work with compiled in
+ kernels and modules from bug report by
+ <Zlatko.Calusic@CARNet.hr> et al.
+ 0.542 15-Sep-98 Fix dc2114x_autoconf() to stop multiple messages
+ when media is unconnected.
+ Change dev->interrupt to lp->interrupt to ensure
+ alignment for Alpha's and avoid their unaligned
+ access traps. This flag is merely for log messages:
+ should do something more definitive though...
+ 0.543 30-Dec-98 Add SMP spin locking.
+ 0.544 8-May-99 Fix for buggy SROM in Motorola embedded boards using
+ a 21143 by <mmporter@home.com>.
+ Change PCI/EISA bus probing order.
+ 0.545 28-Nov-99 Further Moto SROM bug fix from
+ <mporter@eng.mcd.mot.com>
+ Remove double checking for DEBUG_RX in de4x5_dbg_rx()
+ from report by <geert@linux-m68k.org>
+ 0.546 22-Feb-01 Fixes Alpha XP1000 oops. The srom_search function
+ was causing a page fault when initializing the
+ variable 'pb', on a non de4x5 PCI device, in this
+ case a PCI bridge (DEC chip 21152). The value of
+ 'pb' is now only initialized if a de4x5 chip is
+ present.
+ <france@handhelds.org>
+ 0.547 08-Nov-01 Use library crc32 functions by <Matt_Domsch@dell.com>
+ 0.548 30-Aug-03 Big 2.6 cleanup. Ported to PCI/EISA probing and
+ generic DMA APIs. Fixed DE425 support on Alpha.
+ <maz@wild-wind.fr.eu.org>
+ =========================================================================
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/eisa.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/crc32.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/time.h>
+#include <linux/types.h>
+#include <linux/unistd.h>
+#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
+#include <linux/moduleparam.h>
+#include <linux/bitops.h>
+#include <linux/gfp.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+#include <asm/uaccess.h>
+#ifdef CONFIG_PPC_PMAC
+#include <asm/machdep.h>
+#endif /* CONFIG_PPC_PMAC */
+
+#include "de4x5.h"
+
+static const char version[] __devinitconst =
+ KERN_INFO "de4x5.c:V0.546 2001/02/22 davies@maniac.ultranet.com\n";
+
+#define c_char const char
+
+/*
+** MII Information
+*/
+struct phy_table {
+ int reset; /* Hard reset required? */
+ int id; /* IEEE OUI */
+ int ta; /* One cycle TA time - 802.3u is confusing here */
+ struct { /* Non autonegotiation (parallel) speed det. */
+ int reg;
+ int mask;
+ int value;
+ } spd;
+};
+
+struct mii_phy {
+ int reset; /* Hard reset required? */
+ int id; /* IEEE OUI */
+ int ta; /* One cycle TA time */
+ struct { /* Non autonegotiation (parallel) speed det. */
+ int reg;
+ int mask;
+ int value;
+ } spd;
+ int addr; /* MII address for the PHY */
+ u_char *gep; /* Start of GEP sequence block in SROM */
+ u_char *rst; /* Start of reset sequence in SROM */
+ u_int mc; /* Media Capabilities */
+ u_int ana; /* NWay Advertisement */
+ u_int fdx; /* Full DupleX capabilities for each media */
+ u_int ttm; /* Transmit Threshold Mode for each media */
+ u_int mci; /* 21142 MII Connector Interrupt info */
+};
+
+#define DE4X5_MAX_PHY 8 /* Allow up to 8 attached PHY devices per board */
+
+struct sia_phy {
+ u_char mc; /* Media Code */
+ u_char ext; /* csr13-15 valid when set */
+ int csr13; /* SIA Connectivity Register */
+ int csr14; /* SIA TX/RX Register */
+ int csr15; /* SIA General Register */
+ int gepc; /* SIA GEP Control Information */
+ int gep; /* SIA GEP Data */
+};
+
+/*
+** Define the know universe of PHY devices that can be
+** recognised by this driver.
+*/
+static struct phy_table phy_info[] = {
+ {0, NATIONAL_TX, 1, {0x19, 0x40, 0x00}}, /* National TX */
+ {1, BROADCOM_T4, 1, {0x10, 0x02, 0x02}}, /* Broadcom T4 */
+ {0, SEEQ_T4 , 1, {0x12, 0x10, 0x10}}, /* SEEQ T4 */
+ {0, CYPRESS_T4 , 1, {0x05, 0x20, 0x20}}, /* Cypress T4 */
+ {0, 0x7810 , 1, {0x14, 0x0800, 0x0800}} /* Level One LTX970 */
+};
+
+/*
+** These GENERIC values assumes that the PHY devices follow 802.3u and
+** allow parallel detection to set the link partner ability register.
+** Detection of 100Base-TX [H/F Duplex] and 100Base-T4 is supported.
+*/
+#define GENERIC_REG 0x05 /* Autoneg. Link Partner Advertisement Reg. */
+#define GENERIC_MASK MII_ANLPA_100M /* All 100Mb/s Technologies */
+#define GENERIC_VALUE MII_ANLPA_100M /* 100B-TX, 100B-TX FDX, 100B-T4 */
+
+/*
+** Define special SROM detection cases
+*/
+static c_char enet_det[][ETH_ALEN] = {
+ {0x00, 0x00, 0xc0, 0x00, 0x00, 0x00},
+ {0x00, 0x00, 0xe8, 0x00, 0x00, 0x00}
+};
+
+#define SMC 1
+#define ACCTON 2
+
+/*
+** SROM Repair definitions. If a broken SROM is detected a card may
+** use this information to help figure out what to do. This is a
+** "stab in the dark" and so far for SMC9332's only.
+*/
+static c_char srom_repair_info[][100] = {
+ {0x00,0x1e,0x00,0x00,0x00,0x08, /* SMC9332 */
+ 0x1f,0x01,0x8f,0x01,0x00,0x01,0x00,0x02,
+ 0x01,0x00,0x00,0x78,0xe0,0x01,0x00,0x50,
+ 0x00,0x18,}
+};
+
+
+#ifdef DE4X5_DEBUG
+static int de4x5_debug = DE4X5_DEBUG;
+#else
+/*static int de4x5_debug = (DEBUG_MII | DEBUG_SROM | DEBUG_PCICFG | DEBUG_MEDIA | DEBUG_VERSION);*/
+static int de4x5_debug = (DEBUG_MEDIA | DEBUG_VERSION);
+#endif
+
+/*
+** Allow per adapter set up. For modules this is simply a command line
+** parameter, e.g.:
+** insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'.
+**
+** For a compiled in driver, place e.g.
+** #define DE4X5_PARM "eth0:fdx autosense=AUI eth2:autosense=TP"
+** here
+*/
+#ifdef DE4X5_PARM
+static char *args = DE4X5_PARM;
+#else
+static char *args;
+#endif
+
+struct parameters {
+ bool fdx;
+ int autosense;
+};
+
+#define DE4X5_AUTOSENSE_MS 250 /* msec autosense tick (DE500) */
+
+#define DE4X5_NDA 0xffe0 /* No Device (I/O) Address */
+
+/*
+** Ethernet PROM defines
+*/
+#define PROBE_LENGTH 32
+#define ETH_PROM_SIG 0xAA5500FFUL
+
+/*
+** Ethernet Info
+*/
+#define PKT_BUF_SZ 1536 /* Buffer size for each Tx/Rx buffer */
+#define IEEE802_3_SZ 1518 /* Packet + CRC */
+#define MAX_PKT_SZ 1514 /* Maximum ethernet packet length */
+#define MAX_DAT_SZ 1500 /* Maximum ethernet data length */
+#define MIN_DAT_SZ 1 /* Minimum ethernet data length */
+#define PKT_HDR_LEN 14 /* Addresses and data length info */
+#define FAKE_FRAME_LEN (MAX_PKT_SZ + 1)
+#define QUEUE_PKT_TIMEOUT (3*HZ) /* 3 second timeout */
+
+
+/*
+** EISA bus defines
+*/
+#define DE4X5_EISA_IO_PORTS 0x0c00 /* I/O port base address, slot 0 */
+#define DE4X5_EISA_TOTAL_SIZE 0x100 /* I/O address extent */
+
+#define EISA_ALLOWED_IRQ_LIST {5, 9, 10, 11}
+
+#define DE4X5_SIGNATURE {"DE425","DE434","DE435","DE450","DE500"}
+#define DE4X5_NAME_LENGTH 8
+
+static c_char *de4x5_signatures[] = DE4X5_SIGNATURE;
+
+/*
+** Ethernet PROM defines for DC21040
+*/
+#define PROBE_LENGTH 32
+#define ETH_PROM_SIG 0xAA5500FFUL
+
+/*
+** PCI Bus defines
+*/
+#define PCI_MAX_BUS_NUM 8
+#define DE4X5_PCI_TOTAL_SIZE 0x80 /* I/O address extent */
+#define DE4X5_CLASS_CODE 0x00020000 /* Network controller, Ethernet */
+
+/*
+** Memory Alignment. Each descriptor is 4 longwords long. To force a
+** particular alignment on the TX descriptor, adjust DESC_SKIP_LEN and
+** DESC_ALIGN. ALIGN aligns the start address of the private memory area
+** and hence the RX descriptor ring's first entry.
+*/
+#define DE4X5_ALIGN4 ((u_long)4 - 1) /* 1 longword align */
+#define DE4X5_ALIGN8 ((u_long)8 - 1) /* 2 longword align */
+#define DE4X5_ALIGN16 ((u_long)16 - 1) /* 4 longword align */
+#define DE4X5_ALIGN32 ((u_long)32 - 1) /* 8 longword align */
+#define DE4X5_ALIGN64 ((u_long)64 - 1) /* 16 longword align */
+#define DE4X5_ALIGN128 ((u_long)128 - 1) /* 32 longword align */
+
+#define DE4X5_ALIGN DE4X5_ALIGN32 /* Keep the DC21040 happy... */
+#define DE4X5_CACHE_ALIGN CAL_16LONG
+#define DESC_SKIP_LEN DSL_0 /* Must agree with DESC_ALIGN */
+/*#define DESC_ALIGN u32 dummy[4]; / * Must agree with DESC_SKIP_LEN */
+#define DESC_ALIGN
+
+#ifndef DEC_ONLY /* See README.de4x5 for using this */
+static int dec_only;
+#else
+static int dec_only = 1;
+#endif
+
+/*
+** DE4X5 IRQ ENABLE/DISABLE
+*/
+#define ENABLE_IRQs { \
+ imr |= lp->irq_en;\
+ outl(imr, DE4X5_IMR); /* Enable the IRQs */\
+}
+
+#define DISABLE_IRQs {\
+ imr = inl(DE4X5_IMR);\
+ imr &= ~lp->irq_en;\
+ outl(imr, DE4X5_IMR); /* Disable the IRQs */\
+}
+
+#define UNMASK_IRQs {\
+ imr |= lp->irq_mask;\
+ outl(imr, DE4X5_IMR); /* Unmask the IRQs */\
+}
+
+#define MASK_IRQs {\
+ imr = inl(DE4X5_IMR);\
+ imr &= ~lp->irq_mask;\
+ outl(imr, DE4X5_IMR); /* Mask the IRQs */\
+}
+
+/*
+** DE4X5 START/STOP
+*/
+#define START_DE4X5 {\
+ omr = inl(DE4X5_OMR);\
+ omr |= OMR_ST | OMR_SR;\
+ outl(omr, DE4X5_OMR); /* Enable the TX and/or RX */\
+}
+
+#define STOP_DE4X5 {\
+ omr = inl(DE4X5_OMR);\
+ omr &= ~(OMR_ST|OMR_SR);\
+ outl(omr, DE4X5_OMR); /* Disable the TX and/or RX */ \
+}
+
+/*
+** DE4X5 SIA RESET
+*/
+#define RESET_SIA outl(0, DE4X5_SICR); /* Reset SIA connectivity regs */
+
+/*
+** DE500 AUTOSENSE TIMER INTERVAL (MILLISECS)
+*/
+#define DE4X5_AUTOSENSE_MS 250
+
+/*
+** SROM Structure
+*/
+struct de4x5_srom {
+ char sub_vendor_id[2];
+ char sub_system_id[2];
+ char reserved[12];
+ char id_block_crc;
+ char reserved2;
+ char version;
+ char num_controllers;
+ char ieee_addr[6];
+ char info[100];
+ short chksum;
+};
+#define SUB_VENDOR_ID 0x500a
+
+/*
+** DE4X5 Descriptors. Make sure that all the RX buffers are contiguous
+** and have sizes of both a power of 2 and a multiple of 4.
+** A size of 256 bytes for each buffer could be chosen because over 90% of
+** all packets in our network are <256 bytes long and 64 longword alignment
+** is possible. 1536 showed better 'ttcp' performance. Take your pick. 32 TX
+** descriptors are needed for machines with an ALPHA CPU.
+*/
+#define NUM_RX_DESC 8 /* Number of RX descriptors */
+#define NUM_TX_DESC 32 /* Number of TX descriptors */
+#define RX_BUFF_SZ 1536 /* Power of 2 for kmalloc and */
+ /* Multiple of 4 for DC21040 */
+ /* Allows 512 byte alignment */
+struct de4x5_desc {
+ volatile __le32 status;
+ __le32 des1;
+ __le32 buf;
+ __le32 next;
+ DESC_ALIGN
+};
+
+/*
+** The DE4X5 private structure
+*/
+#define DE4X5_PKT_STAT_SZ 16
+#define DE4X5_PKT_BIN_SZ 128 /* Should be >=100 unless you
+ increase DE4X5_PKT_STAT_SZ */
+
+struct pkt_stats {
+ u_int bins[DE4X5_PKT_STAT_SZ]; /* Private stats counters */
+ u_int unicast;
+ u_int multicast;
+ u_int broadcast;
+ u_int excessive_collisions;
+ u_int tx_underruns;
+ u_int excessive_underruns;
+ u_int rx_runt_frames;
+ u_int rx_collision;
+ u_int rx_dribble;
+ u_int rx_overflow;
+};
+
+struct de4x5_private {
+ char adapter_name[80]; /* Adapter name */
+ u_long interrupt; /* Aligned ISR flag */
+ struct de4x5_desc *rx_ring; /* RX descriptor ring */
+ struct de4x5_desc *tx_ring; /* TX descriptor ring */
+ struct sk_buff *tx_skb[NUM_TX_DESC]; /* TX skb for freeing when sent */
+ struct sk_buff *rx_skb[NUM_RX_DESC]; /* RX skb's */
+ int rx_new, rx_old; /* RX descriptor ring pointers */
+ int tx_new, tx_old; /* TX descriptor ring pointers */
+ char setup_frame[SETUP_FRAME_LEN]; /* Holds MCA and PA info. */
+ char frame[64]; /* Min sized packet for loopback*/
+ spinlock_t lock; /* Adapter specific spinlock */
+ struct net_device_stats stats; /* Public stats */
+ struct pkt_stats pktStats; /* Private stats counters */
+ char rxRingSize;
+ char txRingSize;
+ int bus; /* EISA or PCI */
+ int bus_num; /* PCI Bus number */
+ int device; /* Device number on PCI bus */
+ int state; /* Adapter OPENED or CLOSED */
+ int chipset; /* DC21040, DC21041 or DC21140 */
+ s32 irq_mask; /* Interrupt Mask (Enable) bits */
+ s32 irq_en; /* Summary interrupt bits */
+ int media; /* Media (eg TP), mode (eg 100B)*/
+ int c_media; /* Remember the last media conn */
+ bool fdx; /* media full duplex flag */
+ int linkOK; /* Link is OK */
+ int autosense; /* Allow/disallow autosensing */
+ bool tx_enable; /* Enable descriptor polling */
+ int setup_f; /* Setup frame filtering type */
+ int local_state; /* State within a 'media' state */
+ struct mii_phy phy[DE4X5_MAX_PHY]; /* List of attached PHY devices */
+ struct sia_phy sia; /* SIA PHY Information */
+ int active; /* Index to active PHY device */
+ int mii_cnt; /* Number of attached PHY's */
+ int timeout; /* Scheduling counter */
+ struct timer_list timer; /* Timer info for kernel */
+ int tmp; /* Temporary global per card */
+ struct {
+ u_long lock; /* Lock the cache accesses */
+ s32 csr0; /* Saved Bus Mode Register */
+ s32 csr6; /* Saved Operating Mode Reg. */
+ s32 csr7; /* Saved IRQ Mask Register */
+ s32 gep; /* Saved General Purpose Reg. */
+ s32 gepc; /* Control info for GEP */
+ s32 csr13; /* Saved SIA Connectivity Reg. */
+ s32 csr14; /* Saved SIA TX/RX Register */
+ s32 csr15; /* Saved SIA General Register */
+ int save_cnt; /* Flag if state already saved */
+ struct sk_buff_head queue; /* Save the (re-ordered) skb's */
+ } cache;
+ struct de4x5_srom srom; /* A copy of the SROM */
+ int cfrv; /* Card CFRV copy */
+ int rx_ovf; /* Check for 'RX overflow' tag */
+ bool useSROM; /* For non-DEC card use SROM */
+ bool useMII; /* Infoblock using the MII */
+ int asBitValid; /* Autosense bits in GEP? */
+ int asPolarity; /* 0 => asserted high */
+ int asBit; /* Autosense bit number in GEP */
+ int defMedium; /* SROM default medium */
+ int tcount; /* Last infoblock number */
+ int infoblock_init; /* Initialised this infoblock? */
+ int infoleaf_offset; /* SROM infoleaf for controller */
+ s32 infoblock_csr6; /* csr6 value in SROM infoblock */
+ int infoblock_media; /* infoblock media */
+ int (*infoleaf_fn)(struct net_device *); /* Pointer to infoleaf function */
+ u_char *rst; /* Pointer to Type 5 reset info */
+ u_char ibn; /* Infoblock number */
+ struct parameters params; /* Command line/ #defined params */
+ struct device *gendev; /* Generic device */
+ dma_addr_t dma_rings; /* DMA handle for rings */
+ int dma_size; /* Size of the DMA area */
+ char *rx_bufs; /* rx bufs on alpha, sparc, ... */
+};
+
+/*
+** To get around certain poxy cards that don't provide an SROM
+** for the second and more DECchip, I have to key off the first
+** chip's address. I'll assume there's not a bad SROM iff:
+**
+** o the chipset is the same
+** o the bus number is the same and > 0
+** o the sum of all the returned hw address bytes is 0 or 0x5fa
+**
+** Also have to save the irq for those cards whose hardware designers
+** can't follow the PCI to PCI Bridge Architecture spec.
+*/
+static struct {
+ int chipset;
+ int bus;
+ int irq;
+ u_char addr[ETH_ALEN];
+} last = {0,};
+
+/*
+** The transmit ring full condition is described by the tx_old and tx_new
+** pointers by:
+** tx_old = tx_new Empty ring
+** tx_old = tx_new+1 Full ring
+** tx_old+txRingSize = tx_new+1 Full ring (wrapped condition)
+*/
+#define TX_BUFFS_AVAIL ((lp->tx_old<=lp->tx_new)?\
+ lp->tx_old+lp->txRingSize-lp->tx_new-1:\
+ lp->tx_old -lp->tx_new-1)
+
+#define TX_PKT_PENDING (lp->tx_old != lp->tx_new)
+
+/*
+** Public Functions
+*/
+static int de4x5_open(struct net_device *dev);
+static netdev_tx_t de4x5_queue_pkt(struct sk_buff *skb,
+ struct net_device *dev);
+static irqreturn_t de4x5_interrupt(int irq, void *dev_id);
+static int de4x5_close(struct net_device *dev);
+static struct net_device_stats *de4x5_get_stats(struct net_device *dev);
+static void de4x5_local_stats(struct net_device *dev, char *buf, int pkt_len);
+static void set_multicast_list(struct net_device *dev);
+static int de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+
+/*
+** Private functions
+*/
+static int de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev);
+static int de4x5_init(struct net_device *dev);
+static int de4x5_sw_reset(struct net_device *dev);
+static int de4x5_rx(struct net_device *dev);
+static int de4x5_tx(struct net_device *dev);
+static void de4x5_ast(struct net_device *dev);
+static int de4x5_txur(struct net_device *dev);
+static int de4x5_rx_ovfc(struct net_device *dev);
+
+static int autoconf_media(struct net_device *dev);
+static void create_packet(struct net_device *dev, char *frame, int len);
+static void load_packet(struct net_device *dev, char *buf, u32 flags, struct sk_buff *skb);
+static int dc21040_autoconf(struct net_device *dev);
+static int dc21041_autoconf(struct net_device *dev);
+static int dc21140m_autoconf(struct net_device *dev);
+static int dc2114x_autoconf(struct net_device *dev);
+static int srom_autoconf(struct net_device *dev);
+static int de4x5_suspect_state(struct net_device *dev, int timeout, int prev_state, int (*fn)(struct net_device *, int), int (*asfn)(struct net_device *));
+static int dc21040_state(struct net_device *dev, int csr13, int csr14, int csr15, int timeout, int next_state, int suspect_state, int (*fn)(struct net_device *, int));
+static int test_media(struct net_device *dev, s32 irqs, s32 irq_mask, s32 csr13, s32 csr14, s32 csr15, s32 msec);
+static int test_for_100Mb(struct net_device *dev, int msec);
+static int wait_for_link(struct net_device *dev);
+static int test_mii_reg(struct net_device *dev, int reg, int mask, bool pol, long msec);
+static int is_spd_100(struct net_device *dev);
+static int is_100_up(struct net_device *dev);
+static int is_10_up(struct net_device *dev);
+static int is_anc_capable(struct net_device *dev);
+static int ping_media(struct net_device *dev, int msec);
+static struct sk_buff *de4x5_alloc_rx_buff(struct net_device *dev, int index, int len);
+static void de4x5_free_rx_buffs(struct net_device *dev);
+static void de4x5_free_tx_buffs(struct net_device *dev);
+static void de4x5_save_skbs(struct net_device *dev);
+static void de4x5_rst_desc_ring(struct net_device *dev);
+static void de4x5_cache_state(struct net_device *dev, int flag);
+static void de4x5_put_cache(struct net_device *dev, struct sk_buff *skb);
+static void de4x5_putb_cache(struct net_device *dev, struct sk_buff *skb);
+static struct sk_buff *de4x5_get_cache(struct net_device *dev);
+static void de4x5_setup_intr(struct net_device *dev);
+static void de4x5_init_connection(struct net_device *dev);
+static int de4x5_reset_phy(struct net_device *dev);
+static void reset_init_sia(struct net_device *dev, s32 sicr, s32 strr, s32 sigr);
+static int test_ans(struct net_device *dev, s32 irqs, s32 irq_mask, s32 msec);
+static int test_tp(struct net_device *dev, s32 msec);
+static int EISA_signature(char *name, struct device *device);
+static int PCI_signature(char *name, struct de4x5_private *lp);
+static void DevicePresent(struct net_device *dev, u_long iobase);
+static void enet_addr_rst(u_long aprom_addr);
+static int de4x5_bad_srom(struct de4x5_private *lp);
+static short srom_rd(u_long address, u_char offset);
+static void srom_latch(u_int command, u_long address);
+static void srom_command(u_int command, u_long address);
+static void srom_address(u_int command, u_long address, u_char offset);
+static short srom_data(u_int command, u_long address);
+/*static void srom_busy(u_int command, u_long address);*/
+static void sendto_srom(u_int command, u_long addr);
+static int getfrom_srom(u_long addr);
+static int srom_map_media(struct net_device *dev);
+static int srom_infoleaf_info(struct net_device *dev);
+static void srom_init(struct net_device *dev);
+static void srom_exec(struct net_device *dev, u_char *p);
+static int mii_rd(u_char phyreg, u_char phyaddr, u_long ioaddr);
+static void mii_wr(int data, u_char phyreg, u_char phyaddr, u_long ioaddr);
+static int mii_rdata(u_long ioaddr);
+static void mii_wdata(int data, int len, u_long ioaddr);
+static void mii_ta(u_long rw, u_long ioaddr);
+static int mii_swap(int data, int len);
+static void mii_address(u_char addr, u_long ioaddr);
+static void sendto_mii(u32 command, int data, u_long ioaddr);
+static int getfrom_mii(u32 command, u_long ioaddr);
+static int mii_get_oui(u_char phyaddr, u_long ioaddr);
+static int mii_get_phy(struct net_device *dev);
+static void SetMulticastFilter(struct net_device *dev);
+static int get_hw_addr(struct net_device *dev);
+static void srom_repair(struct net_device *dev, int card);
+static int test_bad_enet(struct net_device *dev, int status);
+static int an_exception(struct de4x5_private *lp);
+static char *build_setup_frame(struct net_device *dev, int mode);
+static void disable_ast(struct net_device *dev);
+static long de4x5_switch_mac_port(struct net_device *dev);
+static int gep_rd(struct net_device *dev);
+static void gep_wr(s32 data, struct net_device *dev);
+static void yawn(struct net_device *dev, int state);
+static void de4x5_parse_params(struct net_device *dev);
+static void de4x5_dbg_open(struct net_device *dev);
+static void de4x5_dbg_mii(struct net_device *dev, int k);
+static void de4x5_dbg_media(struct net_device *dev);
+static void de4x5_dbg_srom(struct de4x5_srom *p);
+static void de4x5_dbg_rx(struct sk_buff *skb, int len);
+static int de4x5_strncmp(char *a, char *b, int n);
+static int dc21041_infoleaf(struct net_device *dev);
+static int dc21140_infoleaf(struct net_device *dev);
+static int dc21142_infoleaf(struct net_device *dev);
+static int dc21143_infoleaf(struct net_device *dev);
+static int type0_infoblock(struct net_device *dev, u_char count, u_char *p);
+static int type1_infoblock(struct net_device *dev, u_char count, u_char *p);
+static int type2_infoblock(struct net_device *dev, u_char count, u_char *p);
+static int type3_infoblock(struct net_device *dev, u_char count, u_char *p);
+static int type4_infoblock(struct net_device *dev, u_char count, u_char *p);
+static int type5_infoblock(struct net_device *dev, u_char count, u_char *p);
+static int compact_infoblock(struct net_device *dev, u_char count, u_char *p);
+
+/*
+** Note now that module autoprobing is allowed under EISA and PCI. The
+** IRQ lines will not be auto-detected; instead I'll rely on the BIOSes
+** to "do the right thing".
+*/
+
+static int io=0x0;/* EDIT THIS LINE FOR YOUR CONFIGURATION IF NEEDED */
+
+module_param(io, int, 0);
+module_param(de4x5_debug, int, 0);
+module_param(dec_only, int, 0);
+module_param(args, charp, 0);
+
+MODULE_PARM_DESC(io, "de4x5 I/O base address");
+MODULE_PARM_DESC(de4x5_debug, "de4x5 debug mask");
+MODULE_PARM_DESC(dec_only, "de4x5 probe only for Digital boards (0-1)");
+MODULE_PARM_DESC(args, "de4x5 full duplex and media type settings; see de4x5.c for details");
+MODULE_LICENSE("GPL");
+
+/*
+** List the SROM infoleaf functions and chipsets
+*/
+struct InfoLeaf {
+ int chipset;
+ int (*fn)(struct net_device *);
+};
+static struct InfoLeaf infoleaf_array[] = {
+ {DC21041, dc21041_infoleaf},
+ {DC21140, dc21140_infoleaf},
+ {DC21142, dc21142_infoleaf},
+ {DC21143, dc21143_infoleaf}
+};
+#define INFOLEAF_SIZE ARRAY_SIZE(infoleaf_array)
+
+/*
+** List the SROM info block functions
+*/
+static int (*dc_infoblock[])(struct net_device *dev, u_char, u_char *) = {
+ type0_infoblock,
+ type1_infoblock,
+ type2_infoblock,
+ type3_infoblock,
+ type4_infoblock,
+ type5_infoblock,
+ compact_infoblock
+};
+
+#define COMPACT (ARRAY_SIZE(dc_infoblock) - 1)
+
+/*
+** Miscellaneous defines...
+*/
+#define RESET_DE4X5 {\
+ int i;\
+ i=inl(DE4X5_BMR);\
+ mdelay(1);\
+ outl(i | BMR_SWR, DE4X5_BMR);\
+ mdelay(1);\
+ outl(i, DE4X5_BMR);\
+ mdelay(1);\
+ for (i=0;i<5;i++) {inl(DE4X5_BMR); mdelay(1);}\
+ mdelay(1);\
+}
+
+#define PHY_HARD_RESET {\
+ outl(GEP_HRST, DE4X5_GEP); /* Hard RESET the PHY dev. */\
+ mdelay(1); /* Assert for 1ms */\
+ outl(0x00, DE4X5_GEP);\
+ mdelay(2); /* Wait for 2ms */\
+}
+
+static const struct net_device_ops de4x5_netdev_ops = {
+ .ndo_open = de4x5_open,
+ .ndo_stop = de4x5_close,
+ .ndo_start_xmit = de4x5_queue_pkt,
+ .ndo_get_stats = de4x5_get_stats,
+ .ndo_set_multicast_list = set_multicast_list,
+ .ndo_do_ioctl = de4x5_ioctl,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address= eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+
+static int __devinit
+de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
+{
+ char name[DE4X5_NAME_LENGTH + 1];
+ struct de4x5_private *lp = netdev_priv(dev);
+ struct pci_dev *pdev = NULL;
+ int i, status=0;
+
+ dev_set_drvdata(gendev, dev);
+
+ /* Ensure we're not sleeping */
+ if (lp->bus == EISA) {
+ outb(WAKEUP, PCI_CFPM);
+ } else {
+ pdev = to_pci_dev (gendev);
+ pci_write_config_byte(pdev, PCI_CFDA_PSM, WAKEUP);
+ }
+ mdelay(10);
+
+ RESET_DE4X5;
+
+ if ((inl(DE4X5_STS) & (STS_TS | STS_RS)) != 0) {
+ return -ENXIO; /* Hardware could not reset */
+ }
+
+ /*
+ ** Now find out what kind of DC21040/DC21041/DC21140 board we have.
+ */
+ lp->useSROM = false;
+ if (lp->bus == PCI) {
+ PCI_signature(name, lp);
+ } else {
+ EISA_signature(name, gendev);
+ }
+
+ if (*name == '\0') { /* Not found a board signature */
+ return -ENXIO;
+ }
+
+ dev->base_addr = iobase;
+ printk ("%s: %s at 0x%04lx", dev_name(gendev), name, iobase);
+
+ status = get_hw_addr(dev);
+ printk(", h/w address %pM\n", dev->dev_addr);
+
+ if (status != 0) {
+ printk(" which has an Ethernet PROM CRC error.\n");
+ return -ENXIO;
+ } else {
+ skb_queue_head_init(&lp->cache.queue);
+ lp->cache.gepc = GEP_INIT;
+ lp->asBit = GEP_SLNK;
+ lp->asPolarity = GEP_SLNK;
+ lp->asBitValid = ~0;
+ lp->timeout = -1;
+ lp->gendev = gendev;
+ spin_lock_init(&lp->lock);
+ init_timer(&lp->timer);
+ lp->timer.function = (void (*)(unsigned long))de4x5_ast;
+ lp->timer.data = (unsigned long)dev;
+ de4x5_parse_params(dev);
+
+ /*
+ ** Choose correct autosensing in case someone messed up
+ */
+ lp->autosense = lp->params.autosense;
+ if (lp->chipset != DC21140) {
+ if ((lp->chipset==DC21040) && (lp->params.autosense&TP_NW)) {
+ lp->params.autosense = TP;
+ }
+ if ((lp->chipset==DC21041) && (lp->params.autosense&BNC_AUI)) {
+ lp->params.autosense = BNC;
+ }
+ }
+ lp->fdx = lp->params.fdx;
+ sprintf(lp->adapter_name,"%s (%s)", name, dev_name(gendev));
+
+ lp->dma_size = (NUM_RX_DESC + NUM_TX_DESC) * sizeof(struct de4x5_desc);
+#if defined(__alpha__) || defined(__powerpc__) || defined(CONFIG_SPARC) || defined(DE4X5_DO_MEMCPY)
+ lp->dma_size += RX_BUFF_SZ * NUM_RX_DESC + DE4X5_ALIGN;
+#endif
+ lp->rx_ring = dma_alloc_coherent(gendev, lp->dma_size,
+ &lp->dma_rings, GFP_ATOMIC);
+ if (lp->rx_ring == NULL) {
+ return -ENOMEM;
+ }
+
+ lp->tx_ring = lp->rx_ring + NUM_RX_DESC;
+
+ /*
+ ** Set up the RX descriptor ring (Intels)
+ ** Allocate contiguous receive buffers, long word aligned (Alphas)
+ */
+#if !defined(__alpha__) && !defined(__powerpc__) && !defined(CONFIG_SPARC) && !defined(DE4X5_DO_MEMCPY)
+ for (i=0; i<NUM_RX_DESC; i++) {
+ lp->rx_ring[i].status = 0;
+ lp->rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ);
+ lp->rx_ring[i].buf = 0;
+ lp->rx_ring[i].next = 0;
+ lp->rx_skb[i] = (struct sk_buff *) 1; /* Dummy entry */
+ }
+
+#else
+ {
+ dma_addr_t dma_rx_bufs;
+
+ dma_rx_bufs = lp->dma_rings + (NUM_RX_DESC + NUM_TX_DESC)
+ * sizeof(struct de4x5_desc);
+ dma_rx_bufs = (dma_rx_bufs + DE4X5_ALIGN) & ~DE4X5_ALIGN;
+ lp->rx_bufs = (char *)(((long)(lp->rx_ring + NUM_RX_DESC
+ + NUM_TX_DESC) + DE4X5_ALIGN) & ~DE4X5_ALIGN);
+ for (i=0; i<NUM_RX_DESC; i++) {
+ lp->rx_ring[i].status = 0;
+ lp->rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ);
+ lp->rx_ring[i].buf =
+ cpu_to_le32(dma_rx_bufs+i*RX_BUFF_SZ);
+ lp->rx_ring[i].next = 0;
+ lp->rx_skb[i] = (struct sk_buff *) 1; /* Dummy entry */
+ }
+
+ }
+#endif
+
+ barrier();
+
+ lp->rxRingSize = NUM_RX_DESC;
+ lp->txRingSize = NUM_TX_DESC;
+
+ /* Write the end of list marker to the descriptor lists */
+ lp->rx_ring[lp->rxRingSize - 1].des1 |= cpu_to_le32(RD_RER);
+ lp->tx_ring[lp->txRingSize - 1].des1 |= cpu_to_le32(TD_TER);
+
+ /* Tell the adapter where the TX/RX rings are located. */
+ outl(lp->dma_rings, DE4X5_RRBA);
+ outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc),
+ DE4X5_TRBA);
+
+ /* Initialise the IRQ mask and Enable/Disable */
+ lp->irq_mask = IMR_RIM | IMR_TIM | IMR_TUM | IMR_UNM;
+ lp->irq_en = IMR_NIM | IMR_AIM;
+
+ /* Create a loopback packet frame for later media probing */
+ create_packet(dev, lp->frame, sizeof(lp->frame));
+
+ /* Check if the RX overflow bug needs testing for */
+ i = lp->cfrv & 0x000000fe;
+ if ((lp->chipset == DC21140) && (i == 0x20)) {
+ lp->rx_ovf = 1;
+ }
+
+ /* Initialise the SROM pointers if possible */
+ if (lp->useSROM) {
+ lp->state = INITIALISED;
+ if (srom_infoleaf_info(dev)) {
+ dma_free_coherent (gendev, lp->dma_size,
+ lp->rx_ring, lp->dma_rings);
+ return -ENXIO;
+ }
+ srom_init(dev);
+ }
+
+ lp->state = CLOSED;
+
+ /*
+ ** Check for an MII interface
+ */
+ if ((lp->chipset != DC21040) && (lp->chipset != DC21041)) {
+ mii_get_phy(dev);
+ }
+
+ printk(" and requires IRQ%d (provided by %s).\n", dev->irq,
+ ((lp->bus == PCI) ? "PCI BIOS" : "EISA CNFG"));
+ }
+
+ if (de4x5_debug & DEBUG_VERSION) {
+ printk(version);
+ }
+
+ /* The DE4X5-specific entries in the device structure. */
+ SET_NETDEV_DEV(dev, gendev);
+ dev->netdev_ops = &de4x5_netdev_ops;
+ dev->mem_start = 0;
+
+ /* Fill in the generic fields of the device structure. */
+ if ((status = register_netdev (dev))) {
+ dma_free_coherent (gendev, lp->dma_size,
+ lp->rx_ring, lp->dma_rings);
+ return status;
+ }
+
+ /* Let the adapter sleep to save power */
+ yawn(dev, SLEEP);
+
+ return status;
+}
+
+
+static int
+de4x5_open(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ int i, status = 0;
+ s32 omr;
+
+ /* Allocate the RX buffers */
+ for (i=0; i<lp->rxRingSize; i++) {
+ if (de4x5_alloc_rx_buff(dev, i, 0) == NULL) {
+ de4x5_free_rx_buffs(dev);
+ return -EAGAIN;
+ }
+ }
+
+ /*
+ ** Wake up the adapter
+ */
+ yawn(dev, WAKEUP);
+
+ /*
+ ** Re-initialize the DE4X5...
+ */
+ status = de4x5_init(dev);
+ spin_lock_init(&lp->lock);
+ lp->state = OPEN;
+ de4x5_dbg_open(dev);
+
+ if (request_irq(dev->irq, de4x5_interrupt, IRQF_SHARED,
+ lp->adapter_name, dev)) {
+ printk("de4x5_open(): Requested IRQ%d is busy - attemping FAST/SHARE...", dev->irq);
+ if (request_irq(dev->irq, de4x5_interrupt, IRQF_DISABLED | IRQF_SHARED,
+ lp->adapter_name, dev)) {
+ printk("\n Cannot get IRQ- reconfigure your hardware.\n");
+ disable_ast(dev);
+ de4x5_free_rx_buffs(dev);
+ de4x5_free_tx_buffs(dev);
+ yawn(dev, SLEEP);
+ lp->state = CLOSED;
+ return -EAGAIN;
+ } else {
+ printk("\n Succeeded, but you should reconfigure your hardware to avoid this.\n");
+ printk("WARNING: there may be IRQ related problems in heavily loaded systems.\n");
+ }
+ }
+
+ lp->interrupt = UNMASK_INTERRUPTS;
+ dev->trans_start = jiffies; /* prevent tx timeout */
+
+ START_DE4X5;
+
+ de4x5_setup_intr(dev);
+
+ if (de4x5_debug & DEBUG_OPEN) {
+ printk("\tsts: 0x%08x\n", inl(DE4X5_STS));
+ printk("\tbmr: 0x%08x\n", inl(DE4X5_BMR));
+ printk("\timr: 0x%08x\n", inl(DE4X5_IMR));
+ printk("\tomr: 0x%08x\n", inl(DE4X5_OMR));
+ printk("\tsisr: 0x%08x\n", inl(DE4X5_SISR));
+ printk("\tsicr: 0x%08x\n", inl(DE4X5_SICR));
+ printk("\tstrr: 0x%08x\n", inl(DE4X5_STRR));
+ printk("\tsigr: 0x%08x\n", inl(DE4X5_SIGR));
+ }
+
+ return status;
+}
+
+/*
+** Initialize the DE4X5 operating conditions. NB: a chip problem with the
+** DC21140 requires using perfect filtering mode for that chip. Since I can't
+** see why I'd want > 14 multicast addresses, I have changed all chips to use
+** the perfect filtering mode. Keep the DMA burst length at 8: there seems
+** to be data corruption problems if it is larger (UDP errors seen from a
+** ttcp source).
+*/
+static int
+de4x5_init(struct net_device *dev)
+{
+ /* Lock out other processes whilst setting up the hardware */
+ netif_stop_queue(dev);
+
+ de4x5_sw_reset(dev);
+
+ /* Autoconfigure the connected port */
+ autoconf_media(dev);
+
+ return 0;
+}
+
+static int
+de4x5_sw_reset(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ int i, j, status = 0;
+ s32 bmr, omr;
+
+ /* Select the MII or SRL port now and RESET the MAC */
+ if (!lp->useSROM) {
+ if (lp->phy[lp->active].id != 0) {
+ lp->infoblock_csr6 = OMR_SDP | OMR_PS | OMR_HBD;
+ } else {
+ lp->infoblock_csr6 = OMR_SDP | OMR_TTM;
+ }
+ de4x5_switch_mac_port(dev);
+ }
+
+ /*
+ ** Set the programmable burst length to 8 longwords for all the DC21140
+ ** Fasternet chips and 4 longwords for all others: DMA errors result
+ ** without these values. Cache align 16 long.
+ */
+ bmr = (lp->chipset==DC21140 ? PBL_8 : PBL_4) | DESC_SKIP_LEN | DE4X5_CACHE_ALIGN;
+ bmr |= ((lp->chipset & ~0x00ff)==DC2114x ? BMR_RML : 0);
+ outl(bmr, DE4X5_BMR);
+
+ omr = inl(DE4X5_OMR) & ~OMR_PR; /* Turn off promiscuous mode */
+ if (lp->chipset == DC21140) {
+ omr |= (OMR_SDP | OMR_SB);
+ }
+ lp->setup_f = PERFECT;
+ outl(lp->dma_rings, DE4X5_RRBA);
+ outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc),
+ DE4X5_TRBA);
+
+ lp->rx_new = lp->rx_old = 0;
+ lp->tx_new = lp->tx_old = 0;
+
+ for (i = 0; i < lp->rxRingSize; i++) {
+ lp->rx_ring[i].status = cpu_to_le32(R_OWN);
+ }
+
+ for (i = 0; i < lp->txRingSize; i++) {
+ lp->tx_ring[i].status = cpu_to_le32(0);
+ }
+
+ barrier();
+
+ /* Build the setup frame depending on filtering mode */
+ SetMulticastFilter(dev);
+
+ load_packet(dev, lp->setup_frame, PERFECT_F|TD_SET|SETUP_FRAME_LEN, (struct sk_buff *)1);
+ outl(omr|OMR_ST, DE4X5_OMR);
+
+ /* Poll for setup frame completion (adapter interrupts are disabled now) */
+
+ for (j=0, i=0;(i<500) && (j==0);i++) { /* Up to 500ms delay */
+ mdelay(1);
+ if ((s32)le32_to_cpu(lp->tx_ring[lp->tx_new].status) >= 0) j=1;
+ }
+ outl(omr, DE4X5_OMR); /* Stop everything! */
+
+ if (j == 0) {
+ printk("%s: Setup frame timed out, status %08x\n", dev->name,
+ inl(DE4X5_STS));
+ status = -EIO;
+ }
+
+ lp->tx_new = (lp->tx_new + 1) % lp->txRingSize;
+ lp->tx_old = lp->tx_new;
+
+ return status;
+}
+
+/*
+** Writes a socket buffer address to the next available transmit descriptor.
+*/
+static netdev_tx_t
+de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ u_long flags = 0;
+
+ netif_stop_queue(dev);
+ if (!lp->tx_enable) /* Cannot send for now */
+ return NETDEV_TX_LOCKED;
+
+ /*
+ ** Clean out the TX ring asynchronously to interrupts - sometimes the
+ ** interrupts are lost by delayed descriptor status updates relative to
+ ** the irq assertion, especially with a busy PCI bus.
+ */
+ spin_lock_irqsave(&lp->lock, flags);
+ de4x5_tx(dev);
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ /* Test if cache is already locked - requeue skb if so */
+ if (test_and_set_bit(0, (void *)&lp->cache.lock) && !lp->interrupt)
+ return NETDEV_TX_LOCKED;
+
+ /* Transmit descriptor ring full or stale skb */
+ if (netif_queue_stopped(dev) || (u_long) lp->tx_skb[lp->tx_new] > 1) {
+ if (lp->interrupt) {
+ de4x5_putb_cache(dev, skb); /* Requeue the buffer */
+ } else {
+ de4x5_put_cache(dev, skb);
+ }
+ if (de4x5_debug & DEBUG_TX) {
+ printk("%s: transmit busy, lost media or stale skb found:\n STS:%08x\n tbusy:%d\n IMR:%08x\n OMR:%08x\n Stale skb: %s\n",dev->name, inl(DE4X5_STS), netif_queue_stopped(dev), inl(DE4X5_IMR), inl(DE4X5_OMR), ((u_long) lp->tx_skb[lp->tx_new] > 1) ? "YES" : "NO");
+ }
+ } else if (skb->len > 0) {
+ /* If we already have stuff queued locally, use that first */
+ if (!skb_queue_empty(&lp->cache.queue) && !lp->interrupt) {
+ de4x5_put_cache(dev, skb);
+ skb = de4x5_get_cache(dev);
+ }
+
+ while (skb && !netif_queue_stopped(dev) &&
+ (u_long) lp->tx_skb[lp->tx_new] <= 1) {
+ spin_lock_irqsave(&lp->lock, flags);
+ netif_stop_queue(dev);
+ load_packet(dev, skb->data, TD_IC | TD_LS | TD_FS | skb->len, skb);
+ lp->stats.tx_bytes += skb->len;
+ outl(POLL_DEMAND, DE4X5_TPD);/* Start the TX */
+
+ lp->tx_new = (lp->tx_new + 1) % lp->txRingSize;
+
+ if (TX_BUFFS_AVAIL) {
+ netif_start_queue(dev); /* Another pkt may be queued */
+ }
+ skb = de4x5_get_cache(dev);
+ spin_unlock_irqrestore(&lp->lock, flags);
+ }
+ if (skb) de4x5_putb_cache(dev, skb);
+ }
+
+ lp->cache.lock = 0;
+
+ return NETDEV_TX_OK;
+}
+
+/*
+** The DE4X5 interrupt handler.
+**
+** I/O Read/Writes through intermediate PCI bridges are never 'posted',
+** so that the asserted interrupt always has some real data to work with -
+** if these I/O accesses are ever changed to memory accesses, ensure the
+** STS write is read immediately to complete the transaction if the adapter
+** is not on bus 0. Lost interrupts can still occur when the PCI bus load
+** is high and descriptor status bits cannot be set before the associated
+** interrupt is asserted and this routine entered.
+*/
+static irqreturn_t
+de4x5_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct de4x5_private *lp;
+ s32 imr, omr, sts, limit;
+ u_long iobase;
+ unsigned int handled = 0;
+
+ lp = netdev_priv(dev);
+ spin_lock(&lp->lock);
+ iobase = dev->base_addr;
+
+ DISABLE_IRQs; /* Ensure non re-entrancy */
+
+ if (test_and_set_bit(MASK_INTERRUPTS, (void*) &lp->interrupt))
+ printk("%s: Re-entering the interrupt handler.\n", dev->name);
+
+ synchronize_irq(dev->irq);
+
+ for (limit=0; limit<8; limit++) {
+ sts = inl(DE4X5_STS); /* Read IRQ status */
+ outl(sts, DE4X5_STS); /* Reset the board interrupts */
+
+ if (!(sts & lp->irq_mask)) break;/* All done */
+ handled = 1;
+
+ if (sts & (STS_RI | STS_RU)) /* Rx interrupt (packet[s] arrived) */
+ de4x5_rx(dev);
+
+ if (sts & (STS_TI | STS_TU)) /* Tx interrupt (packet sent) */
+ de4x5_tx(dev);
+
+ if (sts & STS_LNF) { /* TP Link has failed */
+ lp->irq_mask &= ~IMR_LFM;
+ }
+
+ if (sts & STS_UNF) { /* Transmit underrun */
+ de4x5_txur(dev);
+ }
+
+ if (sts & STS_SE) { /* Bus Error */
+ STOP_DE4X5;
+ printk("%s: Fatal bus error occurred, sts=%#8x, device stopped.\n",
+ dev->name, sts);
+ spin_unlock(&lp->lock);
+ return IRQ_HANDLED;
+ }
+ }
+
+ /* Load the TX ring with any locally stored packets */
+ if (!test_and_set_bit(0, (void *)&lp->cache.lock)) {
+ while (!skb_queue_empty(&lp->cache.queue) && !netif_queue_stopped(dev) && lp->tx_enable) {
+ de4x5_queue_pkt(de4x5_get_cache(dev), dev);
+ }
+ lp->cache.lock = 0;
+ }
+
+ lp->interrupt = UNMASK_INTERRUPTS;
+ ENABLE_IRQs;
+ spin_unlock(&lp->lock);
+
+ return IRQ_RETVAL(handled);
+}
+
+static int
+de4x5_rx(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ int entry;
+ s32 status;
+
+ for (entry=lp->rx_new; (s32)le32_to_cpu(lp->rx_ring[entry].status)>=0;
+ entry=lp->rx_new) {
+ status = (s32)le32_to_cpu(lp->rx_ring[entry].status);
+
+ if (lp->rx_ovf) {
+ if (inl(DE4X5_MFC) & MFC_FOCM) {
+ de4x5_rx_ovfc(dev);
+ break;
+ }
+ }
+
+ if (status & RD_FS) { /* Remember the start of frame */
+ lp->rx_old = entry;
+ }
+
+ if (status & RD_LS) { /* Valid frame status */
+ if (lp->tx_enable) lp->linkOK++;
+ if (status & RD_ES) { /* There was an error. */
+ lp->stats.rx_errors++; /* Update the error stats. */
+ if (status & (RD_RF | RD_TL)) lp->stats.rx_frame_errors++;
+ if (status & RD_CE) lp->stats.rx_crc_errors++;
+ if (status & RD_OF) lp->stats.rx_fifo_errors++;
+ if (status & RD_TL) lp->stats.rx_length_errors++;
+ if (status & RD_RF) lp->pktStats.rx_runt_frames++;
+ if (status & RD_CS) lp->pktStats.rx_collision++;
+ if (status & RD_DB) lp->pktStats.rx_dribble++;
+ if (status & RD_OF) lp->pktStats.rx_overflow++;
+ } else { /* A valid frame received */
+ struct sk_buff *skb;
+ short pkt_len = (short)(le32_to_cpu(lp->rx_ring[entry].status)
+ >> 16) - 4;
+
+ if ((skb = de4x5_alloc_rx_buff(dev, entry, pkt_len)) == NULL) {
+ printk("%s: Insufficient memory; nuking packet.\n",
+ dev->name);
+ lp->stats.rx_dropped++;
+ } else {
+ de4x5_dbg_rx(skb, pkt_len);
+
+ /* Push up the protocol stack */
+ skb->protocol=eth_type_trans(skb,dev);
+ de4x5_local_stats(dev, skb->data, pkt_len);
+ netif_rx(skb);
+
+ /* Update stats */
+ lp->stats.rx_packets++;
+ lp->stats.rx_bytes += pkt_len;
+ }
+ }
+
+ /* Change buffer ownership for this frame, back to the adapter */
+ for (;lp->rx_old!=entry;lp->rx_old=(lp->rx_old + 1)%lp->rxRingSize) {
+ lp->rx_ring[lp->rx_old].status = cpu_to_le32(R_OWN);
+ barrier();
+ }
+ lp->rx_ring[entry].status = cpu_to_le32(R_OWN);
+ barrier();
+ }
+
+ /*
+ ** Update entry information
+ */
+ lp->rx_new = (lp->rx_new + 1) % lp->rxRingSize;
+ }
+
+ return 0;
+}
+
+static inline void
+de4x5_free_tx_buff(struct de4x5_private *lp, int entry)
+{
+ dma_unmap_single(lp->gendev, le32_to_cpu(lp->tx_ring[entry].buf),
+ le32_to_cpu(lp->tx_ring[entry].des1) & TD_TBS1,
+ DMA_TO_DEVICE);
+ if ((u_long) lp->tx_skb[entry] > 1)
+ dev_kfree_skb_irq(lp->tx_skb[entry]);
+ lp->tx_skb[entry] = NULL;
+}
+
+/*
+** Buffer sent - check for TX buffer errors.
+*/
+static int
+de4x5_tx(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ int entry;
+ s32 status;
+
+ for (entry = lp->tx_old; entry != lp->tx_new; entry = lp->tx_old) {
+ status = (s32)le32_to_cpu(lp->tx_ring[entry].status);
+ if (status < 0) { /* Buffer not sent yet */
+ break;
+ } else if (status != 0x7fffffff) { /* Not setup frame */
+ if (status & TD_ES) { /* An error happened */
+ lp->stats.tx_errors++;
+ if (status & TD_NC) lp->stats.tx_carrier_errors++;
+ if (status & TD_LC) lp->stats.tx_window_errors++;
+ if (status & TD_UF) lp->stats.tx_fifo_errors++;
+ if (status & TD_EC) lp->pktStats.excessive_collisions++;
+ if (status & TD_DE) lp->stats.tx_aborted_errors++;
+
+ if (TX_PKT_PENDING) {
+ outl(POLL_DEMAND, DE4X5_TPD);/* Restart a stalled TX */
+ }
+ } else { /* Packet sent */
+ lp->stats.tx_packets++;
+ if (lp->tx_enable) lp->linkOK++;
+ }
+ /* Update the collision counter */
+ lp->stats.collisions += ((status & TD_EC) ? 16 :
+ ((status & TD_CC) >> 3));
+
+ /* Free the buffer. */
+ if (lp->tx_skb[entry] != NULL)
+ de4x5_free_tx_buff(lp, entry);
+ }
+
+ /* Update all the pointers */
+ lp->tx_old = (lp->tx_old + 1) % lp->txRingSize;
+ }
+
+ /* Any resources available? */
+ if (TX_BUFFS_AVAIL && netif_queue_stopped(dev)) {
+ if (lp->interrupt)
+ netif_wake_queue(dev);
+ else
+ netif_start_queue(dev);
+ }
+
+ return 0;
+}
+
+static void
+de4x5_ast(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ int next_tick = DE4X5_AUTOSENSE_MS;
+ int dt;
+
+ if (lp->useSROM)
+ next_tick = srom_autoconf(dev);
+ else if (lp->chipset == DC21140)
+ next_tick = dc21140m_autoconf(dev);
+ else if (lp->chipset == DC21041)
+ next_tick = dc21041_autoconf(dev);
+ else if (lp->chipset == DC21040)
+ next_tick = dc21040_autoconf(dev);
+ lp->linkOK = 0;
+
+ dt = (next_tick * HZ) / 1000;
+
+ if (!dt)
+ dt = 1;
+
+ mod_timer(&lp->timer, jiffies + dt);
+}
+
+static int
+de4x5_txur(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ int omr;
+
+ omr = inl(DE4X5_OMR);
+ if (!(omr & OMR_SF) || (lp->chipset==DC21041) || (lp->chipset==DC21040)) {
+ omr &= ~(OMR_ST|OMR_SR);
+ outl(omr, DE4X5_OMR);
+ while (inl(DE4X5_STS) & STS_TS);
+ if ((omr & OMR_TR) < OMR_TR) {
+ omr += 0x4000;
+ } else {
+ omr |= OMR_SF;
+ }
+ outl(omr | OMR_ST | OMR_SR, DE4X5_OMR);
+ }
+
+ return 0;
+}
+
+static int
+de4x5_rx_ovfc(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ int omr;
+
+ omr = inl(DE4X5_OMR);
+ outl(omr & ~OMR_SR, DE4X5_OMR);
+ while (inl(DE4X5_STS) & STS_RS);
+
+ for (; (s32)le32_to_cpu(lp->rx_ring[lp->rx_new].status)>=0;) {
+ lp->rx_ring[lp->rx_new].status = cpu_to_le32(R_OWN);
+ lp->rx_new = (lp->rx_new + 1) % lp->rxRingSize;
+ }
+
+ outl(omr, DE4X5_OMR);
+
+ return 0;
+}
+
+static int
+de4x5_close(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ s32 imr, omr;
+
+ disable_ast(dev);
+
+ netif_stop_queue(dev);
+
+ if (de4x5_debug & DEBUG_CLOSE) {
+ printk("%s: Shutting down ethercard, status was %8.8x.\n",
+ dev->name, inl(DE4X5_STS));
+ }
+
+ /*
+ ** We stop the DE4X5 here... mask interrupts and stop TX & RX
+ */
+ DISABLE_IRQs;
+ STOP_DE4X5;
+
+ /* Free the associated irq */
+ free_irq(dev->irq, dev);
+ lp->state = CLOSED;
+
+ /* Free any socket buffers */
+ de4x5_free_rx_buffs(dev);
+ de4x5_free_tx_buffs(dev);
+
+ /* Put the adapter to sleep to save power */
+ yawn(dev, SLEEP);
+
+ return 0;
+}
+
+static struct net_device_stats *
+de4x5_get_stats(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+
+ lp->stats.rx_missed_errors = (int)(inl(DE4X5_MFC) & (MFC_OVFL | MFC_CNTR));
+
+ return &lp->stats;
+}
+
+static void
+de4x5_local_stats(struct net_device *dev, char *buf, int pkt_len)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ int i;
+
+ for (i=1; i<DE4X5_PKT_STAT_SZ-1; i++) {
+ if (pkt_len < (i*DE4X5_PKT_BIN_SZ)) {
+ lp->pktStats.bins[i]++;
+ i = DE4X5_PKT_STAT_SZ;
+ }
+ }
+ if (is_multicast_ether_addr(buf)) {
+ if (is_broadcast_ether_addr(buf)) {
+ lp->pktStats.broadcast++;
+ } else {
+ lp->pktStats.multicast++;
+ }
+ } else if (compare_ether_addr(buf, dev->dev_addr) == 0) {
+ lp->pktStats.unicast++;
+ }
+
+ lp->pktStats.bins[0]++; /* Duplicates stats.rx_packets */
+ if (lp->pktStats.bins[0] == 0) { /* Reset counters */
+ memset((char *)&lp->pktStats, 0, sizeof(lp->pktStats));
+ }
+}
+
+/*
+** Removes the TD_IC flag from previous descriptor to improve TX performance.
+** If the flag is changed on a descriptor that is being read by the hardware,
+** I assume PCI transaction ordering will mean you are either successful or
+** just miss asserting the change to the hardware. Anyway you're messing with
+** a descriptor you don't own, but this shouldn't kill the chip provided
+** the descriptor register is read only to the hardware.
+*/
+static void
+load_packet(struct net_device *dev, char *buf, u32 flags, struct sk_buff *skb)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ int entry = (lp->tx_new ? lp->tx_new-1 : lp->txRingSize-1);
+ dma_addr_t buf_dma = dma_map_single(lp->gendev, buf, flags & TD_TBS1, DMA_TO_DEVICE);
+
+ lp->tx_ring[lp->tx_new].buf = cpu_to_le32(buf_dma);
+ lp->tx_ring[lp->tx_new].des1 &= cpu_to_le32(TD_TER);
+ lp->tx_ring[lp->tx_new].des1 |= cpu_to_le32(flags);
+ lp->tx_skb[lp->tx_new] = skb;
+ lp->tx_ring[entry].des1 &= cpu_to_le32(~TD_IC);
+ barrier();
+
+ lp->tx_ring[lp->tx_new].status = cpu_to_le32(T_OWN);
+ barrier();
+}
+
+/*
+** Set or clear the multicast filter for this adaptor.
+*/
+static void
+set_multicast_list(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+
+ /* First, double check that the adapter is open */
+ if (lp->state == OPEN) {
+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
+ u32 omr;
+ omr = inl(DE4X5_OMR);
+ omr |= OMR_PR;
+ outl(omr, DE4X5_OMR);
+ } else {
+ SetMulticastFilter(dev);
+ load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET |
+ SETUP_FRAME_LEN, (struct sk_buff *)1);
+
+ lp->tx_new = (lp->tx_new + 1) % lp->txRingSize;
+ outl(POLL_DEMAND, DE4X5_TPD); /* Start the TX */
+ dev->trans_start = jiffies; /* prevent tx timeout */
+ }
+ }
+}
+
+/*
+** Calculate the hash code and update the logical address filter
+** from a list of ethernet multicast addresses.
+** Little endian crc one liner from Matt Thomas, DEC.
+*/
+static void
+SetMulticastFilter(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ struct netdev_hw_addr *ha;
+ u_long iobase = dev->base_addr;
+ int i, bit, byte;
+ u16 hashcode;
+ u32 omr, crc;
+ char *pa;
+ unsigned char *addrs;
+
+ omr = inl(DE4X5_OMR);
+ omr &= ~(OMR_PR | OMR_PM);
+ pa = build_setup_frame(dev, ALL); /* Build the basic frame */
+
+ if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 14)) {
+ omr |= OMR_PM; /* Pass all multicasts */
+ } else if (lp->setup_f == HASH_PERF) { /* Hash Filtering */
+ netdev_for_each_mc_addr(ha, dev) {
+ crc = ether_crc_le(ETH_ALEN, ha->addr);
+ hashcode = crc & HASH_BITS; /* hashcode is 9 LSb of CRC */
+
+ byte = hashcode >> 3; /* bit[3-8] -> byte in filter */
+ bit = 1 << (hashcode & 0x07);/* bit[0-2] -> bit in byte */
+
+ byte <<= 1; /* calc offset into setup frame */
+ if (byte & 0x02) {
+ byte -= 1;
+ }
+ lp->setup_frame[byte] |= bit;
+ }
+ } else { /* Perfect filtering */
+ netdev_for_each_mc_addr(ha, dev) {
+ addrs = ha->addr;
+ for (i=0; i<ETH_ALEN; i++) {
+ *(pa + (i&1)) = *addrs++;
+ if (i & 0x01) pa += 4;
+ }
+ }
+ }
+ outl(omr, DE4X5_OMR);
+}
+
+#ifdef CONFIG_EISA
+
+static u_char de4x5_irq[] = EISA_ALLOWED_IRQ_LIST;
+
+static int __init de4x5_eisa_probe (struct device *gendev)
+{
+ struct eisa_device *edev;
+ u_long iobase;
+ u_char irq, regval;
+ u_short vendor;
+ u32 cfid;
+ int status, device;
+ struct net_device *dev;
+ struct de4x5_private *lp;
+
+ edev = to_eisa_device (gendev);
+ iobase = edev->base_addr;
+
+ if (!request_region (iobase, DE4X5_EISA_TOTAL_SIZE, "de4x5"))
+ return -EBUSY;
+
+ if (!request_region (iobase + DE4X5_EISA_IO_PORTS,
+ DE4X5_EISA_TOTAL_SIZE, "de4x5")) {
+ status = -EBUSY;
+ goto release_reg_1;
+ }
+
+ if (!(dev = alloc_etherdev (sizeof (struct de4x5_private)))) {
+ status = -ENOMEM;
+ goto release_reg_2;
+ }
+ lp = netdev_priv(dev);
+
+ cfid = (u32) inl(PCI_CFID);
+ lp->cfrv = (u_short) inl(PCI_CFRV);
+ device = (cfid >> 8) & 0x00ffff00;
+ vendor = (u_short) cfid;
+
+ /* Read the EISA Configuration Registers */
+ regval = inb(EISA_REG0) & (ER0_INTL | ER0_INTT);
+#ifdef CONFIG_ALPHA
+ /* Looks like the Jensen firmware (rev 2.2) doesn't really
+ * care about the EISA configuration, and thus doesn't
+ * configure the PLX bridge properly. Oh well... Simply mimic
+ * the EISA config file to sort it out. */
+
+ /* EISA REG1: Assert DecChip 21040 HW Reset */
+ outb (ER1_IAM | 1, EISA_REG1);
+ mdelay (1);
+
+ /* EISA REG1: Deassert DecChip 21040 HW Reset */
+ outb (ER1_IAM, EISA_REG1);
+ mdelay (1);
+
+ /* EISA REG3: R/W Burst Transfer Enable */
+ outb (ER3_BWE | ER3_BRE, EISA_REG3);
+
+ /* 32_bit slave/master, Preempt Time=23 bclks, Unlatched Interrupt */
+ outb (ER0_BSW | ER0_BMW | ER0_EPT | regval, EISA_REG0);
+#endif
+ irq = de4x5_irq[(regval >> 1) & 0x03];
+
+ if (is_DC2114x) {
+ device = ((lp->cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143);
+ }
+ lp->chipset = device;
+ lp->bus = EISA;
+
+ /* Write the PCI Configuration Registers */
+ outl(PCI_COMMAND_IO | PCI_COMMAND_MASTER, PCI_CFCS);
+ outl(0x00006000, PCI_CFLT);
+ outl(iobase, PCI_CBIO);
+
+ DevicePresent(dev, EISA_APROM);
+
+ dev->irq = irq;
+
+ if (!(status = de4x5_hw_init (dev, iobase, gendev))) {
+ return 0;
+ }
+
+ free_netdev (dev);
+ release_reg_2:
+ release_region (iobase + DE4X5_EISA_IO_PORTS, DE4X5_EISA_TOTAL_SIZE);
+ release_reg_1:
+ release_region (iobase, DE4X5_EISA_TOTAL_SIZE);
+
+ return status;
+}
+
+static int __devexit de4x5_eisa_remove (struct device *device)
+{
+ struct net_device *dev;
+ u_long iobase;
+
+ dev = dev_get_drvdata(device);
+ iobase = dev->base_addr;
+
+ unregister_netdev (dev);
+ free_netdev (dev);
+ release_region (iobase + DE4X5_EISA_IO_PORTS, DE4X5_EISA_TOTAL_SIZE);
+ release_region (iobase, DE4X5_EISA_TOTAL_SIZE);
+
+ return 0;
+}
+
+static struct eisa_device_id de4x5_eisa_ids[] = {
+ { "DEC4250", 0 }, /* 0 is the board name index... */
+ { "" }
+};
+MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
+
+static struct eisa_driver de4x5_eisa_driver = {
+ .id_table = de4x5_eisa_ids,
+ .driver = {
+ .name = "de4x5",
+ .probe = de4x5_eisa_probe,
+ .remove = __devexit_p (de4x5_eisa_remove),
+ }
+};
+MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
+#endif
+
+#ifdef CONFIG_PCI
+
+/*
+** This function searches the current bus (which is >0) for a DECchip with an
+** SROM, so that in multiport cards that have one SROM shared between multiple
+** DECchips, we can find the base SROM irrespective of the BIOS scan direction.
+** For single port cards this is a time waster...
+*/
+static void __devinit
+srom_search(struct net_device *dev, struct pci_dev *pdev)
+{
+ u_char pb;
+ u_short vendor, status;
+ u_int irq = 0, device;
+ u_long iobase = 0; /* Clear upper 32 bits in Alphas */
+ int i, j;
+ struct de4x5_private *lp = netdev_priv(dev);
+ struct list_head *walk;
+
+ list_for_each(walk, &pdev->bus_list) {
+ struct pci_dev *this_dev = pci_dev_b(walk);
+
+ /* Skip the pci_bus list entry */
+ if (list_entry(walk, struct pci_bus, devices) == pdev->bus) continue;
+
+ vendor = this_dev->vendor;
+ device = this_dev->device << 8;
+ if (!(is_DC21040 || is_DC21041 || is_DC21140 || is_DC2114x)) continue;
+
+ /* Get the chip configuration revision register */
+ pb = this_dev->bus->number;
+
+ /* Set the device number information */
+ lp->device = PCI_SLOT(this_dev->devfn);
+ lp->bus_num = pb;
+
+ /* Set the chipset information */
+ if (is_DC2114x) {
+ device = ((this_dev->revision & CFRV_RN) < DC2114x_BRK
+ ? DC21142 : DC21143);
+ }
+ lp->chipset = device;
+
+ /* Get the board I/O address (64 bits on sparc64) */
+ iobase = pci_resource_start(this_dev, 0);
+
+ /* Fetch the IRQ to be used */
+ irq = this_dev->irq;
+ if ((irq == 0) || (irq == 0xff) || ((int)irq == -1)) continue;
+
+ /* Check if I/O accesses are enabled */
+ pci_read_config_word(this_dev, PCI_COMMAND, &status);
+ if (!(status & PCI_COMMAND_IO)) continue;
+
+ /* Search for a valid SROM attached to this DECchip */
+ DevicePresent(dev, DE4X5_APROM);
+ for (j=0, i=0; i<ETH_ALEN; i++) {
+ j += (u_char) *((u_char *)&lp->srom + SROM_HWADD + i);
+ }
+ if (j != 0 && j != 6 * 0xff) {
+ last.chipset = device;
+ last.bus = pb;
+ last.irq = irq;
+ for (i=0; i<ETH_ALEN; i++) {
+ last.addr[i] = (u_char)*((u_char *)&lp->srom + SROM_HWADD + i);
+ }
+ return;
+ }
+ }
+}
+
+/*
+** PCI bus I/O device probe
+** NB: PCI I/O accesses and Bus Mastering are enabled by the PCI BIOS, not
+** the driver. Some PCI BIOS's, pre V2.1, need the slot + features to be
+** enabled by the user first in the set up utility. Hence we just check for
+** enabled features and silently ignore the card if they're not.
+**
+** STOP PRESS: Some BIOS's __require__ the driver to enable the bus mastering
+** bit. Here, check for I/O accesses and then set BM. If you put the card in
+** a non BM slot, you're on your own (and complain to the PC vendor that your
+** PC doesn't conform to the PCI standard)!
+**
+** This function is only compatible with the *latest* 2.1.x kernels. For 2.0.x
+** kernels use the V0.535[n] drivers.
+*/
+
+static int __devinit de4x5_pci_probe (struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ u_char pb, pbus = 0, dev_num, dnum = 0, timer;
+ u_short vendor, status;
+ u_int irq = 0, device;
+ u_long iobase = 0; /* Clear upper 32 bits in Alphas */
+ int error;
+ struct net_device *dev;
+ struct de4x5_private *lp;
+
+ dev_num = PCI_SLOT(pdev->devfn);
+ pb = pdev->bus->number;
+
+ if (io) { /* probe a single PCI device */
+ pbus = (u_short)(io >> 8);
+ dnum = (u_short)(io & 0xff);
+ if ((pbus != pb) || (dnum != dev_num))
+ return -ENODEV;
+ }
+
+ vendor = pdev->vendor;
+ device = pdev->device << 8;
+ if (!(is_DC21040 || is_DC21041 || is_DC21140 || is_DC2114x))
+ return -ENODEV;
+
+ /* Ok, the device seems to be for us. */
+ if ((error = pci_enable_device (pdev)))
+ return error;
+
+ if (!(dev = alloc_etherdev (sizeof (struct de4x5_private)))) {
+ error = -ENOMEM;
+ goto disable_dev;
+ }
+
+ lp = netdev_priv(dev);
+ lp->bus = PCI;
+ lp->bus_num = 0;
+
+ /* Search for an SROM on this bus */
+ if (lp->bus_num != pb) {
+ lp->bus_num = pb;
+ srom_search(dev, pdev);
+ }
+
+ /* Get the chip configuration revision register */
+ lp->cfrv = pdev->revision;
+
+ /* Set the device number information */
+ lp->device = dev_num;
+ lp->bus_num = pb;
+
+ /* Set the chipset information */
+ if (is_DC2114x) {
+ device = ((lp->cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143);
+ }
+ lp->chipset = device;
+
+ /* Get the board I/O address (64 bits on sparc64) */
+ iobase = pci_resource_start(pdev, 0);
+
+ /* Fetch the IRQ to be used */
+ irq = pdev->irq;
+ if ((irq == 0) || (irq == 0xff) || ((int)irq == -1)) {
+ error = -ENODEV;
+ goto free_dev;
+ }
+
+ /* Check if I/O accesses and Bus Mastering are enabled */
+ pci_read_config_word(pdev, PCI_COMMAND, &status);
+#ifdef __powerpc__
+ if (!(status & PCI_COMMAND_IO)) {
+ status |= PCI_COMMAND_IO;
+ pci_write_config_word(pdev, PCI_COMMAND, status);
+ pci_read_config_word(pdev, PCI_COMMAND, &status);
+ }
+#endif /* __powerpc__ */
+ if (!(status & PCI_COMMAND_IO)) {
+ error = -ENODEV;
+ goto free_dev;
+ }
+
+ if (!(status & PCI_COMMAND_MASTER)) {
+ status |= PCI_COMMAND_MASTER;
+ pci_write_config_word(pdev, PCI_COMMAND, status);
+ pci_read_config_word(pdev, PCI_COMMAND, &status);
+ }
+ if (!(status & PCI_COMMAND_MASTER)) {
+ error = -ENODEV;
+ goto free_dev;
+ }
+
+ /* Check the latency timer for values >= 0x60 */
+ pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &timer);
+ if (timer < 0x60) {
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x60);
+ }
+
+ DevicePresent(dev, DE4X5_APROM);
+
+ if (!request_region (iobase, DE4X5_PCI_TOTAL_SIZE, "de4x5")) {
+ error = -EBUSY;
+ goto free_dev;
+ }
+
+ dev->irq = irq;
+
+ if ((error = de4x5_hw_init(dev, iobase, &pdev->dev))) {
+ goto release;
+ }
+
+ return 0;
+
+ release:
+ release_region (iobase, DE4X5_PCI_TOTAL_SIZE);
+ free_dev:
+ free_netdev (dev);
+ disable_dev:
+ pci_disable_device (pdev);
+ return error;
+}
+
+static void __devexit de4x5_pci_remove (struct pci_dev *pdev)
+{
+ struct net_device *dev;
+ u_long iobase;
+
+ dev = dev_get_drvdata(&pdev->dev);
+ iobase = dev->base_addr;
+
+ unregister_netdev (dev);
+ free_netdev (dev);
+ release_region (iobase, DE4X5_PCI_TOTAL_SIZE);
+ pci_disable_device (pdev);
+}
+
+static struct pci_device_id de4x5_pci_tbl[] = {
+ { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_PLUS,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
+ { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
+ { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
+ { },
+};
+
+static struct pci_driver de4x5_pci_driver = {
+ .name = "de4x5",
+ .id_table = de4x5_pci_tbl,
+ .probe = de4x5_pci_probe,
+ .remove = __devexit_p (de4x5_pci_remove),
+};
+
+#endif
+
+/*
+** Auto configure the media here rather than setting the port at compile
+** time. This routine is called by de4x5_init() and when a loss of media is
+** detected (excessive collisions, loss of carrier, no carrier or link fail
+** [TP] or no recent receive activity) to check whether the user has been
+** sneaky and changed the port on us.
+*/
+static int
+autoconf_media(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+
+ disable_ast(dev);
+
+ lp->c_media = AUTO; /* Bogus last media */
+ inl(DE4X5_MFC); /* Zero the lost frames counter */
+ lp->media = INIT;
+ lp->tcount = 0;
+
+ de4x5_ast(dev);
+
+ return lp->media;
+}
+
+/*
+** Autoconfigure the media when using the DC21040. AUI cannot be distinguished
+** from BNC as the port has a jumper to set thick or thin wire. When set for
+** BNC, the BNC port will indicate activity if it's not terminated correctly.
+** The only way to test for that is to place a loopback packet onto the
+** network and watch for errors. Since we're messing with the interrupt mask
+** register, disable the board interrupts and do not allow any more packets to
+** be queued to the hardware. Re-enable everything only when the media is
+** found.
+** I may have to "age out" locally queued packets so that the higher layer
+** timeouts don't effectively duplicate packets on the network.
+*/
+static int
+dc21040_autoconf(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ int next_tick = DE4X5_AUTOSENSE_MS;
+ s32 imr;
+
+ switch (lp->media) {
+ case INIT:
+ DISABLE_IRQs;
+ lp->tx_enable = false;
+ lp->timeout = -1;
+ de4x5_save_skbs(dev);
+ if ((lp->autosense == AUTO) || (lp->autosense == TP)) {
+ lp->media = TP;
+ } else if ((lp->autosense == BNC) || (lp->autosense == AUI) || (lp->autosense == BNC_AUI)) {
+ lp->media = BNC_AUI;
+ } else if (lp->autosense == EXT_SIA) {
+ lp->media = EXT_SIA;
+ } else {
+ lp->media = NC;
+ }
+ lp->local_state = 0;
+ next_tick = dc21040_autoconf(dev);
+ break;
+
+ case TP:
+ next_tick = dc21040_state(dev, 0x8f01, 0xffff, 0x0000, 3000, BNC_AUI,
+ TP_SUSPECT, test_tp);
+ break;
+
+ case TP_SUSPECT:
+ next_tick = de4x5_suspect_state(dev, 1000, TP, test_tp, dc21040_autoconf);
+ break;
+
+ case BNC:
+ case AUI:
+ case BNC_AUI:
+ next_tick = dc21040_state(dev, 0x8f09, 0x0705, 0x0006, 3000, EXT_SIA,
+ BNC_AUI_SUSPECT, ping_media);
+ break;
+
+ case BNC_AUI_SUSPECT:
+ next_tick = de4x5_suspect_state(dev, 1000, BNC_AUI, ping_media, dc21040_autoconf);
+ break;
+
+ case EXT_SIA:
+ next_tick = dc21040_state(dev, 0x3041, 0x0000, 0x0006, 3000,
+ NC, EXT_SIA_SUSPECT, ping_media);
+ break;
+
+ case EXT_SIA_SUSPECT:
+ next_tick = de4x5_suspect_state(dev, 1000, EXT_SIA, ping_media, dc21040_autoconf);
+ break;
+
+ case NC:
+ /* default to TP for all */
+ reset_init_sia(dev, 0x8f01, 0xffff, 0x0000);
+ if (lp->media != lp->c_media) {
+ de4x5_dbg_media(dev);
+ lp->c_media = lp->media;
+ }
+ lp->media = INIT;
+ lp->tx_enable = false;
+ break;
+ }
+
+ return next_tick;
+}
+
+static int
+dc21040_state(struct net_device *dev, int csr13, int csr14, int csr15, int timeout,
+ int next_state, int suspect_state,
+ int (*fn)(struct net_device *, int))
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ int next_tick = DE4X5_AUTOSENSE_MS;
+ int linkBad;
+
+ switch (lp->local_state) {
+ case 0:
+ reset_init_sia(dev, csr13, csr14, csr15);
+ lp->local_state++;
+ next_tick = 500;
+ break;
+
+ case 1:
+ if (!lp->tx_enable) {
+ linkBad = fn(dev, timeout);
+ if (linkBad < 0) {
+ next_tick = linkBad & ~TIMER_CB;
+ } else {
+ if (linkBad && (lp->autosense == AUTO)) {
+ lp->local_state = 0;
+ lp->media = next_state;
+ } else {
+ de4x5_init_connection(dev);
+ }
+ }
+ } else if (!lp->linkOK && (lp->autosense == AUTO)) {
+ lp->media = suspect_state;
+ next_tick = 3000;
+ }
+ break;
+ }
+
+ return next_tick;
+}
+
+static int
+de4x5_suspect_state(struct net_device *dev, int timeout, int prev_state,
+ int (*fn)(struct net_device *, int),
+ int (*asfn)(struct net_device *))
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ int next_tick = DE4X5_AUTOSENSE_MS;
+ int linkBad;
+
+ switch (lp->local_state) {
+ case 1:
+ if (lp->linkOK) {
+ lp->media = prev_state;
+ } else {
+ lp->local_state++;
+ next_tick = asfn(dev);
+ }
+ break;
+
+ case 2:
+ linkBad = fn(dev, timeout);
+ if (linkBad < 0) {
+ next_tick = linkBad & ~TIMER_CB;
+ } else if (!linkBad) {
+ lp->local_state--;
+ lp->media = prev_state;
+ } else {
+ lp->media = INIT;
+ lp->tcount++;
+ }
+ }
+
+ return next_tick;
+}
+
+/*
+** Autoconfigure the media when using the DC21041. AUI needs to be tested
+** before BNC, because the BNC port will indicate activity if it's not
+** terminated correctly. The only way to test for that is to place a loopback
+** packet onto the network and watch for errors. Since we're messing with
+** the interrupt mask register, disable the board interrupts and do not allow
+** any more packets to be queued to the hardware. Re-enable everything only
+** when the media is found.
+*/
+static int
+dc21041_autoconf(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ s32 sts, irqs, irq_mask, imr, omr;
+ int next_tick = DE4X5_AUTOSENSE_MS;
+
+ switch (lp->media) {
+ case INIT:
+ DISABLE_IRQs;
+ lp->tx_enable = false;
+ lp->timeout = -1;
+ de4x5_save_skbs(dev); /* Save non transmitted skb's */
+ if ((lp->autosense == AUTO) || (lp->autosense == TP_NW)) {
+ lp->media = TP; /* On chip auto negotiation is broken */
+ } else if (lp->autosense == TP) {
+ lp->media = TP;
+ } else if (lp->autosense == BNC) {
+ lp->media = BNC;
+ } else if (lp->autosense == AUI) {
+ lp->media = AUI;
+ } else {
+ lp->media = NC;
+ }
+ lp->local_state = 0;
+ next_tick = dc21041_autoconf(dev);
+ break;
+
+ case TP_NW:
+ if (lp->timeout < 0) {
+ omr = inl(DE4X5_OMR);/* Set up full duplex for the autonegotiate */
+ outl(omr | OMR_FDX, DE4X5_OMR);
+ }
+ irqs = STS_LNF | STS_LNP;
+ irq_mask = IMR_LFM | IMR_LPM;
+ sts = test_media(dev, irqs, irq_mask, 0xef01, 0xffff, 0x0008, 2400);
+ if (sts < 0) {
+ next_tick = sts & ~TIMER_CB;
+ } else {
+ if (sts & STS_LNP) {
+ lp->media = ANS;
+ } else {
+ lp->media = AUI;
+ }
+ next_tick = dc21041_autoconf(dev);
+ }
+ break;
+
+ case ANS:
+ if (!lp->tx_enable) {
+ irqs = STS_LNP;
+ irq_mask = IMR_LPM;
+ sts = test_ans(dev, irqs, irq_mask, 3000);
+ if (sts < 0) {
+ next_tick = sts & ~TIMER_CB;
+ } else {
+ if (!(sts & STS_LNP) && (lp->autosense == AUTO)) {
+ lp->media = TP;
+ next_tick = dc21041_autoconf(dev);
+ } else {
+ lp->local_state = 1;
+ de4x5_init_connection(dev);
+ }
+ }
+ } else if (!lp->linkOK && (lp->autosense == AUTO)) {
+ lp->media = ANS_SUSPECT;
+ next_tick = 3000;
+ }
+ break;
+
+ case ANS_SUSPECT:
+ next_tick = de4x5_suspect_state(dev, 1000, ANS, test_tp, dc21041_autoconf);
+ break;
+
+ case TP:
+ if (!lp->tx_enable) {
+ if (lp->timeout < 0) {
+ omr = inl(DE4X5_OMR); /* Set up half duplex for TP */
+ outl(omr & ~OMR_FDX, DE4X5_OMR);
+ }
+ irqs = STS_LNF | STS_LNP;
+ irq_mask = IMR_LFM | IMR_LPM;
+ sts = test_media(dev,irqs, irq_mask, 0xef01, 0xff3f, 0x0008, 2400);
+ if (sts < 0) {
+ next_tick = sts & ~TIMER_CB;
+ } else {
+ if (!(sts & STS_LNP) && (lp->autosense == AUTO)) {
+ if (inl(DE4X5_SISR) & SISR_NRA) {
+ lp->media = AUI; /* Non selected port activity */
+ } else {
+ lp->media = BNC;
+ }
+ next_tick = dc21041_autoconf(dev);
+ } else {
+ lp->local_state = 1;
+ de4x5_init_connection(dev);
+ }
+ }
+ } else if (!lp->linkOK && (lp->autosense == AUTO)) {
+ lp->media = TP_SUSPECT;
+ next_tick = 3000;
+ }
+ break;
+
+ case TP_SUSPECT:
+ next_tick = de4x5_suspect_state(dev, 1000, TP, test_tp, dc21041_autoconf);
+ break;
+
+ case AUI:
+ if (!lp->tx_enable) {
+ if (lp->timeout < 0) {
+ omr = inl(DE4X5_OMR); /* Set up half duplex for AUI */
+ outl(omr & ~OMR_FDX, DE4X5_OMR);
+ }
+ irqs = 0;
+ irq_mask = 0;
+ sts = test_media(dev,irqs, irq_mask, 0xef09, 0xf73d, 0x000e, 1000);
+ if (sts < 0) {
+ next_tick = sts & ~TIMER_CB;
+ } else {
+ if (!(inl(DE4X5_SISR) & SISR_SRA) && (lp->autosense == AUTO)) {
+ lp->media = BNC;
+ next_tick = dc21041_autoconf(dev);
+ } else {
+ lp->local_state = 1;
+ de4x5_init_connection(dev);
+ }
+ }
+ } else if (!lp->linkOK && (lp->autosense == AUTO)) {
+ lp->media = AUI_SUSPECT;
+ next_tick = 3000;
+ }
+ break;
+
+ case AUI_SUSPECT:
+ next_tick = de4x5_suspect_state(dev, 1000, AUI, ping_media, dc21041_autoconf);
+ break;
+
+ case BNC:
+ switch (lp->local_state) {
+ case 0:
+ if (lp->timeout < 0) {
+ omr = inl(DE4X5_OMR); /* Set up half duplex for BNC */
+ outl(omr & ~OMR_FDX, DE4X5_OMR);
+ }
+ irqs = 0;
+ irq_mask = 0;
+ sts = test_media(dev,irqs, irq_mask, 0xef09, 0xf73d, 0x0006, 1000);
+ if (sts < 0) {
+ next_tick = sts & ~TIMER_CB;
+ } else {
+ lp->local_state++; /* Ensure media connected */
+ next_tick = dc21041_autoconf(dev);
+ }
+ break;
+
+ case 1:
+ if (!lp->tx_enable) {
+ if ((sts = ping_media(dev, 3000)) < 0) {
+ next_tick = sts & ~TIMER_CB;
+ } else {
+ if (sts) {
+ lp->local_state = 0;
+ lp->media = NC;
+ } else {
+ de4x5_init_connection(dev);
+ }
+ }
+ } else if (!lp->linkOK && (lp->autosense == AUTO)) {
+ lp->media = BNC_SUSPECT;
+ next_tick = 3000;
+ }
+ break;
+ }
+ break;
+
+ case BNC_SUSPECT:
+ next_tick = de4x5_suspect_state(dev, 1000, BNC, ping_media, dc21041_autoconf);
+ break;
+
+ case NC:
+ omr = inl(DE4X5_OMR); /* Set up full duplex for the autonegotiate */
+ outl(omr | OMR_FDX, DE4X5_OMR);
+ reset_init_sia(dev, 0xef01, 0xffff, 0x0008);/* Initialise the SIA */
+ if (lp->media != lp->c_media) {
+ de4x5_dbg_media(dev);
+ lp->c_media = lp->media;
+ }
+ lp->media = INIT;
+ lp->tx_enable = false;
+ break;
+ }
+
+ return next_tick;
+}
+
+/*
+** Some autonegotiation chips are broken in that they do not return the
+** acknowledge bit (anlpa & MII_ANLPA_ACK) in the link partner advertisement
+** register, except at the first power up negotiation.
+*/
+static int
+dc21140m_autoconf(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ int ana, anlpa, cap, cr, slnk, sr;
+ int next_tick = DE4X5_AUTOSENSE_MS;
+ u_long imr, omr, iobase = dev->base_addr;
+
+ switch(lp->media) {
+ case INIT:
+ if (lp->timeout < 0) {
+ DISABLE_IRQs;
+ lp->tx_enable = false;
+ lp->linkOK = 0;
+ de4x5_save_skbs(dev); /* Save non transmitted skb's */
+ }
+ if ((next_tick = de4x5_reset_phy(dev)) < 0) {
+ next_tick &= ~TIMER_CB;
+ } else {
+ if (lp->useSROM) {
+ if (srom_map_media(dev) < 0) {
+ lp->tcount++;
+ return next_tick;
+ }
+ srom_exec(dev, lp->phy[lp->active].gep);
+ if (lp->infoblock_media == ANS) {
+ ana = lp->phy[lp->active].ana | MII_ANA_CSMA;
+ mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
+ }
+ } else {
+ lp->tmp = MII_SR_ASSC; /* Fake out the MII speed set */
+ SET_10Mb;
+ if (lp->autosense == _100Mb) {
+ lp->media = _100Mb;
+ } else if (lp->autosense == _10Mb) {
+ lp->media = _10Mb;
+ } else if ((lp->autosense == AUTO) &&
+ ((sr=is_anc_capable(dev)) & MII_SR_ANC)) {
+ ana = (((sr >> 6) & MII_ANA_TAF) | MII_ANA_CSMA);
+ ana &= (lp->fdx ? ~0 : ~MII_ANA_FDAM);
+ mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
+ lp->media = ANS;
+ } else if (lp->autosense == AUTO) {
+ lp->media = SPD_DET;
+ } else if (is_spd_100(dev) && is_100_up(dev)) {
+ lp->media = _100Mb;
+ } else {
+ lp->media = NC;
+ }
+ }
+ lp->local_state = 0;
+ next_tick = dc21140m_autoconf(dev);
+ }
+ break;
+
+ case ANS:
+ switch (lp->local_state) {
+ case 0:
+ if (lp->timeout < 0) {
+ mii_wr(MII_CR_ASSE | MII_CR_RAN, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);
+ }
+ cr = test_mii_reg(dev, MII_CR, MII_CR_RAN, false, 500);
+ if (cr < 0) {
+ next_tick = cr & ~TIMER_CB;
+ } else {
+ if (cr) {
+ lp->local_state = 0;
+ lp->media = SPD_DET;
+ } else {
+ lp->local_state++;
+ }
+ next_tick = dc21140m_autoconf(dev);
+ }
+ break;
+
+ case 1:
+ if ((sr=test_mii_reg(dev, MII_SR, MII_SR_ASSC, true, 2000)) < 0) {
+ next_tick = sr & ~TIMER_CB;
+ } else {
+ lp->media = SPD_DET;
+ lp->local_state = 0;
+ if (sr) { /* Success! */
+ lp->tmp = MII_SR_ASSC;
+ anlpa = mii_rd(MII_ANLPA, lp->phy[lp->active].addr, DE4X5_MII);
+ ana = mii_rd(MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
+ if (!(anlpa & MII_ANLPA_RF) &&
+ (cap = anlpa & MII_ANLPA_TAF & ana)) {
+ if (cap & MII_ANA_100M) {
+ lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) != 0;
+ lp->media = _100Mb;
+ } else if (cap & MII_ANA_10M) {
+ lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_10M) != 0;
+
+ lp->media = _10Mb;
+ }
+ }
+ } /* Auto Negotiation failed to finish */
+ next_tick = dc21140m_autoconf(dev);
+ } /* Auto Negotiation failed to start */
+ break;
+ }
+ break;
+
+ case SPD_DET: /* Choose 10Mb/s or 100Mb/s */
+ if (lp->timeout < 0) {
+ lp->tmp = (lp->phy[lp->active].id ? MII_SR_LKS :
+ (~gep_rd(dev) & GEP_LNP));
+ SET_100Mb_PDET;
+ }
+ if ((slnk = test_for_100Mb(dev, 6500)) < 0) {
+ next_tick = slnk & ~TIMER_CB;
+ } else {
+ if (is_spd_100(dev) && is_100_up(dev)) {
+ lp->media = _100Mb;
+ } else if ((!is_spd_100(dev) && (is_10_up(dev) & lp->tmp))) {
+ lp->media = _10Mb;
+ } else {
+ lp->media = NC;
+ }
+ next_tick = dc21140m_autoconf(dev);
+ }
+ break;
+
+ case _100Mb: /* Set 100Mb/s */
+ next_tick = 3000;
+ if (!lp->tx_enable) {
+ SET_100Mb;
+ de4x5_init_connection(dev);
+ } else {
+ if (!lp->linkOK && (lp->autosense == AUTO)) {
+ if (!is_100_up(dev) || (!lp->useSROM && !is_spd_100(dev))) {
+ lp->media = INIT;
+ lp->tcount++;
+ next_tick = DE4X5_AUTOSENSE_MS;
+ }
+ }
+ }
+ break;
+
+ case BNC:
+ case AUI:
+ case _10Mb: /* Set 10Mb/s */
+ next_tick = 3000;
+ if (!lp->tx_enable) {
+ SET_10Mb;
+ de4x5_init_connection(dev);
+ } else {
+ if (!lp->linkOK && (lp->autosense == AUTO)) {
+ if (!is_10_up(dev) || (!lp->useSROM && is_spd_100(dev))) {
+ lp->media = INIT;
+ lp->tcount++;
+ next_tick = DE4X5_AUTOSENSE_MS;
+ }
+ }
+ }
+ break;
+
+ case NC:
+ if (lp->media != lp->c_media) {
+ de4x5_dbg_media(dev);
+ lp->c_media = lp->media;
+ }
+ lp->media = INIT;
+ lp->tx_enable = false;
+ break;
+ }
+
+ return next_tick;
+}
+
+/*
+** This routine may be merged into dc21140m_autoconf() sometime as I'm
+** changing how I figure out the media - but trying to keep it backwards
+** compatible with the de500-xa and de500-aa.
+** Whether it's BNC, AUI, SYM or MII is sorted out in the infoblock
+** functions and set during de4x5_mac_port() and/or de4x5_reset_phy().
+** This routine just has to figure out whether 10Mb/s or 100Mb/s is
+** active.
+** When autonegotiation is working, the ANS part searches the SROM for
+** the highest common speed (TP) link that both can run and if that can
+** be full duplex. That infoblock is executed and then the link speed set.
+**
+** Only _10Mb and _100Mb are tested here.
+*/
+static int
+dc2114x_autoconf(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ s32 cr, anlpa, ana, cap, irqs, irq_mask, imr, omr, slnk, sr, sts;
+ int next_tick = DE4X5_AUTOSENSE_MS;
+
+ switch (lp->media) {
+ case INIT:
+ if (lp->timeout < 0) {
+ DISABLE_IRQs;
+ lp->tx_enable = false;
+ lp->linkOK = 0;
+ lp->timeout = -1;
+ de4x5_save_skbs(dev); /* Save non transmitted skb's */
+ if (lp->params.autosense & ~AUTO) {
+ srom_map_media(dev); /* Fixed media requested */
+ if (lp->media != lp->params.autosense) {
+ lp->tcount++;
+ lp->media = INIT;
+ return next_tick;
+ }
+ lp->media = INIT;
+ }
+ }
+ if ((next_tick = de4x5_reset_phy(dev)) < 0) {
+ next_tick &= ~TIMER_CB;
+ } else {
+ if (lp->autosense == _100Mb) {
+ lp->media = _100Mb;
+ } else if (lp->autosense == _10Mb) {
+ lp->media = _10Mb;
+ } else if (lp->autosense == TP) {
+ lp->media = TP;
+ } else if (lp->autosense == BNC) {
+ lp->media = BNC;
+ } else if (lp->autosense == AUI) {
+ lp->media = AUI;
+ } else {
+ lp->media = SPD_DET;
+ if ((lp->infoblock_media == ANS) &&
+ ((sr=is_anc_capable(dev)) & MII_SR_ANC)) {
+ ana = (((sr >> 6) & MII_ANA_TAF) | MII_ANA_CSMA);
+ ana &= (lp->fdx ? ~0 : ~MII_ANA_FDAM);
+ mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
+ lp->media = ANS;
+ }
+ }
+ lp->local_state = 0;
+ next_tick = dc2114x_autoconf(dev);
+ }
+ break;
+
+ case ANS:
+ switch (lp->local_state) {
+ case 0:
+ if (lp->timeout < 0) {
+ mii_wr(MII_CR_ASSE | MII_CR_RAN, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);
+ }
+ cr = test_mii_reg(dev, MII_CR, MII_CR_RAN, false, 500);
+ if (cr < 0) {
+ next_tick = cr & ~TIMER_CB;
+ } else {
+ if (cr) {
+ lp->local_state = 0;
+ lp->media = SPD_DET;
+ } else {
+ lp->local_state++;
+ }
+ next_tick = dc2114x_autoconf(dev);
+ }
+ break;
+
+ case 1:
+ sr = test_mii_reg(dev, MII_SR, MII_SR_ASSC, true, 2000);
+ if (sr < 0) {
+ next_tick = sr & ~TIMER_CB;
+ } else {
+ lp->media = SPD_DET;
+ lp->local_state = 0;
+ if (sr) { /* Success! */
+ lp->tmp = MII_SR_ASSC;
+ anlpa = mii_rd(MII_ANLPA, lp->phy[lp->active].addr, DE4X5_MII);
+ ana = mii_rd(MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
+ if (!(anlpa & MII_ANLPA_RF) &&
+ (cap = anlpa & MII_ANLPA_TAF & ana)) {
+ if (cap & MII_ANA_100M) {
+ lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) != 0;
+ lp->media = _100Mb;
+ } else if (cap & MII_ANA_10M) {
+ lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_10M) != 0;
+ lp->media = _10Mb;
+ }
+ }
+ } /* Auto Negotiation failed to finish */
+ next_tick = dc2114x_autoconf(dev);
+ } /* Auto Negotiation failed to start */
+ break;
+ }
+ break;
+
+ case AUI:
+ if (!lp->tx_enable) {
+ if (lp->timeout < 0) {
+ omr = inl(DE4X5_OMR); /* Set up half duplex for AUI */
+ outl(omr & ~OMR_FDX, DE4X5_OMR);
+ }
+ irqs = 0;
+ irq_mask = 0;
+ sts = test_media(dev,irqs, irq_mask, 0, 0, 0, 1000);
+ if (sts < 0) {
+ next_tick = sts & ~TIMER_CB;
+ } else {
+ if (!(inl(DE4X5_SISR) & SISR_SRA) && (lp->autosense == AUTO)) {
+ lp->media = BNC;
+ next_tick = dc2114x_autoconf(dev);
+ } else {
+ lp->local_state = 1;
+ de4x5_init_connection(dev);
+ }
+ }
+ } else if (!lp->linkOK && (lp->autosense == AUTO)) {
+ lp->media = AUI_SUSPECT;
+ next_tick = 3000;
+ }
+ break;
+
+ case AUI_SUSPECT:
+ next_tick = de4x5_suspect_state(dev, 1000, AUI, ping_media, dc2114x_autoconf);
+ break;
+
+ case BNC:
+ switch (lp->local_state) {
+ case 0:
+ if (lp->timeout < 0) {
+ omr = inl(DE4X5_OMR); /* Set up half duplex for BNC */
+ outl(omr & ~OMR_FDX, DE4X5_OMR);
+ }
+ irqs = 0;
+ irq_mask = 0;
+ sts = test_media(dev,irqs, irq_mask, 0, 0, 0, 1000);
+ if (sts < 0) {
+ next_tick = sts & ~TIMER_CB;
+ } else {
+ lp->local_state++; /* Ensure media connected */
+ next_tick = dc2114x_autoconf(dev);
+ }
+ break;
+
+ case 1:
+ if (!lp->tx_enable) {
+ if ((sts = ping_media(dev, 3000)) < 0) {
+ next_tick = sts & ~TIMER_CB;
+ } else {
+ if (sts) {
+ lp->local_state = 0;
+ lp->tcount++;
+ lp->media = INIT;
+ } else {
+ de4x5_init_connection(dev);
+ }
+ }
+ } else if (!lp->linkOK && (lp->autosense == AUTO)) {
+ lp->media = BNC_SUSPECT;
+ next_tick = 3000;
+ }
+ break;
+ }
+ break;
+
+ case BNC_SUSPECT:
+ next_tick = de4x5_suspect_state(dev, 1000, BNC, ping_media, dc2114x_autoconf);
+ break;
+
+ case SPD_DET: /* Choose 10Mb/s or 100Mb/s */
+ if (srom_map_media(dev) < 0) {
+ lp->tcount++;
+ lp->media = INIT;
+ return next_tick;
+ }
+ if (lp->media == _100Mb) {
+ if ((slnk = test_for_100Mb(dev, 6500)) < 0) {
+ lp->media = SPD_DET;
+ return slnk & ~TIMER_CB;
+ }
+ } else {
+ if (wait_for_link(dev) < 0) {
+ lp->media = SPD_DET;
+ return PDET_LINK_WAIT;
+ }
+ }
+ if (lp->media == ANS) { /* Do MII parallel detection */
+ if (is_spd_100(dev)) {
+ lp->media = _100Mb;
+ } else {
+ lp->media = _10Mb;
+ }
+ next_tick = dc2114x_autoconf(dev);
+ } else if (((lp->media == _100Mb) && is_100_up(dev)) ||
+ (((lp->media == _10Mb) || (lp->media == TP) ||
+ (lp->media == BNC) || (lp->media == AUI)) &&
+ is_10_up(dev))) {
+ next_tick = dc2114x_autoconf(dev);
+ } else {
+ lp->tcount++;
+ lp->media = INIT;
+ }
+ break;
+
+ case _10Mb:
+ next_tick = 3000;
+ if (!lp->tx_enable) {
+ SET_10Mb;
+ de4x5_init_connection(dev);
+ } else {
+ if (!lp->linkOK && (lp->autosense == AUTO)) {
+ if (!is_10_up(dev) || (!lp->useSROM && is_spd_100(dev))) {
+ lp->media = INIT;
+ lp->tcount++;
+ next_tick = DE4X5_AUTOSENSE_MS;
+ }
+ }
+ }
+ break;
+
+ case _100Mb:
+ next_tick = 3000;
+ if (!lp->tx_enable) {
+ SET_100Mb;
+ de4x5_init_connection(dev);
+ } else {
+ if (!lp->linkOK && (lp->autosense == AUTO)) {
+ if (!is_100_up(dev) || (!lp->useSROM && !is_spd_100(dev))) {
+ lp->media = INIT;
+ lp->tcount++;
+ next_tick = DE4X5_AUTOSENSE_MS;
+ }
+ }
+ }
+ break;
+
+ default:
+ lp->tcount++;
+printk("Huh?: media:%02x\n", lp->media);
+ lp->media = INIT;
+ break;
+ }
+
+ return next_tick;
+}
+
+static int
+srom_autoconf(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+
+ return lp->infoleaf_fn(dev);
+}
+
+/*
+** This mapping keeps the original media codes and FDX flag unchanged.
+** While it isn't strictly necessary, it helps me for the moment...
+** The early return avoids a media state / SROM media space clash.
+*/
+static int
+srom_map_media(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+
+ lp->fdx = false;
+ if (lp->infoblock_media == lp->media)
+ return 0;
+
+ switch(lp->infoblock_media) {
+ case SROM_10BASETF:
+ if (!lp->params.fdx) return -1;
+ lp->fdx = true;
+ case SROM_10BASET:
+ if (lp->params.fdx && !lp->fdx) return -1;
+ if ((lp->chipset == DC21140) || ((lp->chipset & ~0x00ff) == DC2114x)) {
+ lp->media = _10Mb;
+ } else {
+ lp->media = TP;
+ }
+ break;
+
+ case SROM_10BASE2:
+ lp->media = BNC;
+ break;
+
+ case SROM_10BASE5:
+ lp->media = AUI;
+ break;
+
+ case SROM_100BASETF:
+ if (!lp->params.fdx) return -1;
+ lp->fdx = true;
+ case SROM_100BASET:
+ if (lp->params.fdx && !lp->fdx) return -1;
+ lp->media = _100Mb;
+ break;
+
+ case SROM_100BASET4:
+ lp->media = _100Mb;
+ break;
+
+ case SROM_100BASEFF:
+ if (!lp->params.fdx) return -1;
+ lp->fdx = true;
+ case SROM_100BASEF:
+ if (lp->params.fdx && !lp->fdx) return -1;
+ lp->media = _100Mb;
+ break;
+
+ case ANS:
+ lp->media = ANS;
+ lp->fdx = lp->params.fdx;
+ break;
+
+ default:
+ printk("%s: Bad media code [%d] detected in SROM!\n", dev->name,
+ lp->infoblock_media);
+ return -1;
+ break;
+ }
+
+ return 0;
+}
+
+static void
+de4x5_init_connection(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ u_long flags = 0;
+
+ if (lp->media != lp->c_media) {
+ de4x5_dbg_media(dev);
+ lp->c_media = lp->media; /* Stop scrolling media messages */
+ }
+
+ spin_lock_irqsave(&lp->lock, flags);
+ de4x5_rst_desc_ring(dev);
+ de4x5_setup_intr(dev);
+ lp->tx_enable = true;
+ spin_unlock_irqrestore(&lp->lock, flags);
+ outl(POLL_DEMAND, DE4X5_TPD);
+
+ netif_wake_queue(dev);
+}
+
+/*
+** General PHY reset function. Some MII devices don't reset correctly
+** since their MII address pins can float at voltages that are dependent
+** on the signal pin use. Do a double reset to ensure a reset.
+*/
+static int
+de4x5_reset_phy(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ int next_tick = 0;
+
+ if ((lp->useSROM) || (lp->phy[lp->active].id)) {
+ if (lp->timeout < 0) {
+ if (lp->useSROM) {
+ if (lp->phy[lp->active].rst) {
+ srom_exec(dev, lp->phy[lp->active].rst);
+ srom_exec(dev, lp->phy[lp->active].rst);
+ } else if (lp->rst) { /* Type 5 infoblock reset */
+ srom_exec(dev, lp->rst);
+ srom_exec(dev, lp->rst);
+ }
+ } else {
+ PHY_HARD_RESET;
+ }
+ if (lp->useMII) {
+ mii_wr(MII_CR_RST, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);
+ }
+ }
+ if (lp->useMII) {
+ next_tick = test_mii_reg(dev, MII_CR, MII_CR_RST, false, 500);
+ }
+ } else if (lp->chipset == DC21140) {
+ PHY_HARD_RESET;
+ }
+
+ return next_tick;
+}
+
+static int
+test_media(struct net_device *dev, s32 irqs, s32 irq_mask, s32 csr13, s32 csr14, s32 csr15, s32 msec)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ s32 sts, csr12;
+
+ if (lp->timeout < 0) {
+ lp->timeout = msec/100;
+ if (!lp->useSROM) { /* Already done if by SROM, else dc2104[01] */
+ reset_init_sia(dev, csr13, csr14, csr15);
+ }
+
+ /* set up the interrupt mask */
+ outl(irq_mask, DE4X5_IMR);
+
+ /* clear all pending interrupts */
+ sts = inl(DE4X5_STS);
+ outl(sts, DE4X5_STS);
+
+ /* clear csr12 NRA and SRA bits */
+ if ((lp->chipset == DC21041) || lp->useSROM) {
+ csr12 = inl(DE4X5_SISR);
+ outl(csr12, DE4X5_SISR);
+ }
+ }
+
+ sts = inl(DE4X5_STS) & ~TIMER_CB;
+
+ if (!(sts & irqs) && --lp->timeout) {
+ sts = 100 | TIMER_CB;
+ } else {
+ lp->timeout = -1;
+ }
+
+ return sts;
+}
+
+static int
+test_tp(struct net_device *dev, s32 msec)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ int sisr;
+
+ if (lp->timeout < 0) {
+ lp->timeout = msec/100;
+ }
+
+ sisr = (inl(DE4X5_SISR) & ~TIMER_CB) & (SISR_LKF | SISR_NCR);
+
+ if (sisr && --lp->timeout) {
+ sisr = 100 | TIMER_CB;
+ } else {
+ lp->timeout = -1;
+ }
+
+ return sisr;
+}
+
+/*
+** Samples the 100Mb Link State Signal. The sample interval is important
+** because too fast a rate can give erroneous results and confuse the
+** speed sense algorithm.
+*/
+#define SAMPLE_INTERVAL 500 /* ms */
+#define SAMPLE_DELAY 2000 /* ms */
+static int
+test_for_100Mb(struct net_device *dev, int msec)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ int gep = 0, ret = ((lp->chipset & ~0x00ff)==DC2114x? -1 :GEP_SLNK);
+
+ if (lp->timeout < 0) {
+ if ((msec/SAMPLE_INTERVAL) <= 0) return 0;
+ if (msec > SAMPLE_DELAY) {
+ lp->timeout = (msec - SAMPLE_DELAY)/SAMPLE_INTERVAL;
+ gep = SAMPLE_DELAY | TIMER_CB;
+ return gep;
+ } else {
+ lp->timeout = msec/SAMPLE_INTERVAL;
+ }
+ }
+
+ if (lp->phy[lp->active].id || lp->useSROM) {
+ gep = is_100_up(dev) | is_spd_100(dev);
+ } else {
+ gep = (~gep_rd(dev) & (GEP_SLNK | GEP_LNP));
+ }
+ if (!(gep & ret) && --lp->timeout) {
+ gep = SAMPLE_INTERVAL | TIMER_CB;
+ } else {
+ lp->timeout = -1;
+ }
+
+ return gep;
+}
+
+static int
+wait_for_link(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+
+ if (lp->timeout < 0) {
+ lp->timeout = 1;
+ }
+
+ if (lp->timeout--) {
+ return TIMER_CB;
+ } else {
+ lp->timeout = -1;
+ }
+
+ return 0;
+}
+
+/*
+**
+**
+*/
+static int
+test_mii_reg(struct net_device *dev, int reg, int mask, bool pol, long msec)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ int test;
+ u_long iobase = dev->base_addr;
+
+ if (lp->timeout < 0) {
+ lp->timeout = msec/100;
+ }
+
+ reg = mii_rd((u_char)reg, lp->phy[lp->active].addr, DE4X5_MII) & mask;
+ test = (reg ^ (pol ? ~0 : 0)) & mask;
+
+ if (test && --lp->timeout) {
+ reg = 100 | TIMER_CB;
+ } else {
+ lp->timeout = -1;
+ }
+
+ return reg;
+}
+
+static int
+is_spd_100(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ int spd;
+
+ if (lp->useMII) {
+ spd = mii_rd(lp->phy[lp->active].spd.reg, lp->phy[lp->active].addr, DE4X5_MII);
+ spd = ~(spd ^ lp->phy[lp->active].spd.value);
+ spd &= lp->phy[lp->active].spd.mask;
+ } else if (!lp->useSROM) { /* de500-xa */
+ spd = ((~gep_rd(dev)) & GEP_SLNK);
+ } else {
+ if ((lp->ibn == 2) || !lp->asBitValid)
+ return (lp->chipset == DC21143) ? (~inl(DE4X5_SISR)&SISR_LS100) : 0;
+
+ spd = (lp->asBitValid & (lp->asPolarity ^ (gep_rd(dev) & lp->asBit))) |
+ (lp->linkOK & ~lp->asBitValid);
+ }
+
+ return spd;
+}
+
+static int
+is_100_up(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+
+ if (lp->useMII) {
+ /* Double read for sticky bits & temporary drops */
+ mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);
+ return mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII) & MII_SR_LKS;
+ } else if (!lp->useSROM) { /* de500-xa */
+ return (~gep_rd(dev)) & GEP_SLNK;
+ } else {
+ if ((lp->ibn == 2) || !lp->asBitValid)
+ return (lp->chipset == DC21143) ? (~inl(DE4X5_SISR)&SISR_LS100) : 0;
+
+ return (lp->asBitValid&(lp->asPolarity^(gep_rd(dev)&lp->asBit))) |
+ (lp->linkOK & ~lp->asBitValid);
+ }
+}
+
+static int
+is_10_up(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+
+ if (lp->useMII) {
+ /* Double read for sticky bits & temporary drops */
+ mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);
+ return mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII) & MII_SR_LKS;
+ } else if (!lp->useSROM) { /* de500-xa */
+ return (~gep_rd(dev)) & GEP_LNP;
+ } else {
+ if ((lp->ibn == 2) || !lp->asBitValid)
+ return ((lp->chipset & ~0x00ff) == DC2114x) ?
+ (~inl(DE4X5_SISR)&SISR_LS10):
+ 0;
+
+ return (lp->asBitValid&(lp->asPolarity^(gep_rd(dev)&lp->asBit))) |
+ (lp->linkOK & ~lp->asBitValid);
+ }
+}
+
+static int
+is_anc_capable(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+
+ if (lp->phy[lp->active].id && (!lp->useSROM || lp->useMII)) {
+ return mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);
+ } else if ((lp->chipset & ~0x00ff) == DC2114x) {
+ return (inl(DE4X5_SISR) & SISR_LPN) >> 12;
+ } else {
+ return 0;
+ }
+}
+
+/*
+** Send a packet onto the media and watch for send errors that indicate the
+** media is bad or unconnected.
+*/
+static int
+ping_media(struct net_device *dev, int msec)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ int sisr;
+
+ if (lp->timeout < 0) {
+ lp->timeout = msec/100;
+
+ lp->tmp = lp->tx_new; /* Remember the ring position */
+ load_packet(dev, lp->frame, TD_LS | TD_FS | sizeof(lp->frame), (struct sk_buff *)1);
+ lp->tx_new = (lp->tx_new + 1) % lp->txRingSize;
+ outl(POLL_DEMAND, DE4X5_TPD);
+ }
+
+ sisr = inl(DE4X5_SISR);
+
+ if ((!(sisr & SISR_NCR)) &&
+ ((s32)le32_to_cpu(lp->tx_ring[lp->tmp].status) < 0) &&
+ (--lp->timeout)) {
+ sisr = 100 | TIMER_CB;
+ } else {
+ if ((!(sisr & SISR_NCR)) &&
+ !(le32_to_cpu(lp->tx_ring[lp->tmp].status) & (T_OWN | TD_ES)) &&
+ lp->timeout) {
+ sisr = 0;
+ } else {
+ sisr = 1;
+ }
+ lp->timeout = -1;
+ }
+
+ return sisr;
+}
+
+/*
+** This function does 2 things: on Intels it kmalloc's another buffer to
+** replace the one about to be passed up. On Alpha's it kmallocs a buffer
+** into which the packet is copied.
+*/
+static struct sk_buff *
+de4x5_alloc_rx_buff(struct net_device *dev, int index, int len)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ struct sk_buff *p;
+
+#if !defined(__alpha__) && !defined(__powerpc__) && !defined(CONFIG_SPARC) && !defined(DE4X5_DO_MEMCPY)
+ struct sk_buff *ret;
+ u_long i=0, tmp;
+
+ p = dev_alloc_skb(IEEE802_3_SZ + DE4X5_ALIGN + 2);
+ if (!p) return NULL;
+
+ tmp = virt_to_bus(p->data);
+ i = ((tmp + DE4X5_ALIGN) & ~DE4X5_ALIGN) - tmp;
+ skb_reserve(p, i);
+ lp->rx_ring[index].buf = cpu_to_le32(tmp + i);
+
+ ret = lp->rx_skb[index];
+ lp->rx_skb[index] = p;
+
+ if ((u_long) ret > 1) {
+ skb_put(ret, len);
+ }
+
+ return ret;
+
+#else
+ if (lp->state != OPEN) return (struct sk_buff *)1; /* Fake out the open */
+
+ p = dev_alloc_skb(len + 2);
+ if (!p) return NULL;
+
+ skb_reserve(p, 2); /* Align */
+ if (index < lp->rx_old) { /* Wrapped buffer */
+ short tlen = (lp->rxRingSize - lp->rx_old) * RX_BUFF_SZ;
+ memcpy(skb_put(p,tlen),lp->rx_bufs + lp->rx_old * RX_BUFF_SZ,tlen);
+ memcpy(skb_put(p,len-tlen),lp->rx_bufs,len-tlen);
+ } else { /* Linear buffer */
+ memcpy(skb_put(p,len),lp->rx_bufs + lp->rx_old * RX_BUFF_SZ,len);
+ }
+
+ return p;
+#endif
+}
+
+static void
+de4x5_free_rx_buffs(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ int i;
+
+ for (i=0; i<lp->rxRingSize; i++) {
+ if ((u_long) lp->rx_skb[i] > 1) {
+ dev_kfree_skb(lp->rx_skb[i]);
+ }
+ lp->rx_ring[i].status = 0;
+ lp->rx_skb[i] = (struct sk_buff *)1; /* Dummy entry */
+ }
+}
+
+static void
+de4x5_free_tx_buffs(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ int i;
+
+ for (i=0; i<lp->txRingSize; i++) {
+ if (lp->tx_skb[i])
+ de4x5_free_tx_buff(lp, i);
+ lp->tx_ring[i].status = 0;
+ }
+
+ /* Unload the locally queued packets */
+ __skb_queue_purge(&lp->cache.queue);
+}
+
+/*
+** When a user pulls a connection, the DECchip can end up in a
+** 'running - waiting for end of transmission' state. This means that we
+** have to perform a chip soft reset to ensure that we can synchronize
+** the hardware and software and make any media probes using a loopback
+** packet meaningful.
+*/
+static void
+de4x5_save_skbs(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ s32 omr;
+
+ if (!lp->cache.save_cnt) {
+ STOP_DE4X5;
+ de4x5_tx(dev); /* Flush any sent skb's */
+ de4x5_free_tx_buffs(dev);
+ de4x5_cache_state(dev, DE4X5_SAVE_STATE);
+ de4x5_sw_reset(dev);
+ de4x5_cache_state(dev, DE4X5_RESTORE_STATE);
+ lp->cache.save_cnt++;
+ START_DE4X5;
+ }
+}
+
+static void
+de4x5_rst_desc_ring(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ int i;
+ s32 omr;
+
+ if (lp->cache.save_cnt) {
+ STOP_DE4X5;
+ outl(lp->dma_rings, DE4X5_RRBA);
+ outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc),
+ DE4X5_TRBA);
+
+ lp->rx_new = lp->rx_old = 0;
+ lp->tx_new = lp->tx_old = 0;
+
+ for (i = 0; i < lp->rxRingSize; i++) {
+ lp->rx_ring[i].status = cpu_to_le32(R_OWN);
+ }
+
+ for (i = 0; i < lp->txRingSize; i++) {
+ lp->tx_ring[i].status = cpu_to_le32(0);
+ }
+
+ barrier();
+ lp->cache.save_cnt--;
+ START_DE4X5;
+ }
+}
+
+static void
+de4x5_cache_state(struct net_device *dev, int flag)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+
+ switch(flag) {
+ case DE4X5_SAVE_STATE:
+ lp->cache.csr0 = inl(DE4X5_BMR);
+ lp->cache.csr6 = (inl(DE4X5_OMR) & ~(OMR_ST | OMR_SR));
+ lp->cache.csr7 = inl(DE4X5_IMR);
+ break;
+
+ case DE4X5_RESTORE_STATE:
+ outl(lp->cache.csr0, DE4X5_BMR);
+ outl(lp->cache.csr6, DE4X5_OMR);
+ outl(lp->cache.csr7, DE4X5_IMR);
+ if (lp->chipset == DC21140) {
+ gep_wr(lp->cache.gepc, dev);
+ gep_wr(lp->cache.gep, dev);
+ } else {
+ reset_init_sia(dev, lp->cache.csr13, lp->cache.csr14,
+ lp->cache.csr15);
+ }
+ break;
+ }
+}
+
+static void
+de4x5_put_cache(struct net_device *dev, struct sk_buff *skb)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+
+ __skb_queue_tail(&lp->cache.queue, skb);
+}
+
+static void
+de4x5_putb_cache(struct net_device *dev, struct sk_buff *skb)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+
+ __skb_queue_head(&lp->cache.queue, skb);
+}
+
+static struct sk_buff *
+de4x5_get_cache(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+
+ return __skb_dequeue(&lp->cache.queue);
+}
+
+/*
+** Check the Auto Negotiation State. Return OK when a link pass interrupt
+** is received and the auto-negotiation status is NWAY OK.
+*/
+static int
+test_ans(struct net_device *dev, s32 irqs, s32 irq_mask, s32 msec)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ s32 sts, ans;
+
+ if (lp->timeout < 0) {
+ lp->timeout = msec/100;
+ outl(irq_mask, DE4X5_IMR);
+
+ /* clear all pending interrupts */
+ sts = inl(DE4X5_STS);
+ outl(sts, DE4X5_STS);
+ }
+
+ ans = inl(DE4X5_SISR) & SISR_ANS;
+ sts = inl(DE4X5_STS) & ~TIMER_CB;
+
+ if (!(sts & irqs) && (ans ^ ANS_NWOK) && --lp->timeout) {
+ sts = 100 | TIMER_CB;
+ } else {
+ lp->timeout = -1;
+ }
+
+ return sts;
+}
+
+static void
+de4x5_setup_intr(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ s32 imr, sts;
+
+ if (inl(DE4X5_OMR) & OMR_SR) { /* Only unmask if TX/RX is enabled */
+ imr = 0;
+ UNMASK_IRQs;
+ sts = inl(DE4X5_STS); /* Reset any pending (stale) interrupts */
+ outl(sts, DE4X5_STS);
+ ENABLE_IRQs;
+ }
+}
+
+/*
+**
+*/
+static void
+reset_init_sia(struct net_device *dev, s32 csr13, s32 csr14, s32 csr15)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+
+ RESET_SIA;
+ if (lp->useSROM) {
+ if (lp->ibn == 3) {
+ srom_exec(dev, lp->phy[lp->active].rst);
+ srom_exec(dev, lp->phy[lp->active].gep);
+ outl(1, DE4X5_SICR);
+ return;
+ } else {
+ csr15 = lp->cache.csr15;
+ csr14 = lp->cache.csr14;
+ csr13 = lp->cache.csr13;
+ outl(csr15 | lp->cache.gepc, DE4X5_SIGR);
+ outl(csr15 | lp->cache.gep, DE4X5_SIGR);
+ }
+ } else {
+ outl(csr15, DE4X5_SIGR);
+ }
+ outl(csr14, DE4X5_STRR);
+ outl(csr13, DE4X5_SICR);
+
+ mdelay(10);
+}
+
+/*
+** Create a loopback ethernet packet
+*/
+static void
+create_packet(struct net_device *dev, char *frame, int len)
+{
+ int i;
+ char *buf = frame;
+
+ for (i=0; i<ETH_ALEN; i++) { /* Use this source address */
+ *buf++ = dev->dev_addr[i];
+ }
+ for (i=0; i<ETH_ALEN; i++) { /* Use this destination address */
+ *buf++ = dev->dev_addr[i];
+ }
+
+ *buf++ = 0; /* Packet length (2 bytes) */
+ *buf++ = 1;
+}
+
+/*
+** Look for a particular board name in the EISA configuration space
+*/
+static int
+EISA_signature(char *name, struct device *device)
+{
+ int i, status = 0, siglen = ARRAY_SIZE(de4x5_signatures);
+ struct eisa_device *edev;
+
+ *name = '\0';
+ edev = to_eisa_device (device);
+ i = edev->id.driver_data;
+
+ if (i >= 0 && i < siglen) {
+ strcpy (name, de4x5_signatures[i]);
+ status = 1;
+ }
+
+ return status; /* return the device name string */
+}
+
+/*
+** Look for a particular board name in the PCI configuration space
+*/
+static int
+PCI_signature(char *name, struct de4x5_private *lp)
+{
+ int i, status = 0, siglen = ARRAY_SIZE(de4x5_signatures);
+
+ if (lp->chipset == DC21040) {
+ strcpy(name, "DE434/5");
+ return status;
+ } else { /* Search for a DEC name in the SROM */
+ int tmp = *((char *)&lp->srom + 19) * 3;
+ strncpy(name, (char *)&lp->srom + 26 + tmp, 8);
+ }
+ name[8] = '\0';
+ for (i=0; i<siglen; i++) {
+ if (strstr(name,de4x5_signatures[i])!=NULL) break;
+ }
+ if (i == siglen) {
+ if (dec_only) {
+ *name = '\0';
+ } else { /* Use chip name to avoid confusion */
+ strcpy(name, (((lp->chipset == DC21040) ? "DC21040" :
+ ((lp->chipset == DC21041) ? "DC21041" :
+ ((lp->chipset == DC21140) ? "DC21140" :
+ ((lp->chipset == DC21142) ? "DC21142" :
+ ((lp->chipset == DC21143) ? "DC21143" : "UNKNOWN"
+ )))))));
+ }
+ if (lp->chipset != DC21041) {
+ lp->useSROM = true; /* card is not recognisably DEC */
+ }
+ } else if ((lp->chipset & ~0x00ff) == DC2114x) {
+ lp->useSROM = true;
+ }
+
+ return status;
+}
+
+/*
+** Set up the Ethernet PROM counter to the start of the Ethernet address on
+** the DC21040, else read the SROM for the other chips.
+** The SROM may not be present in a multi-MAC card, so first read the
+** MAC address and check for a bad address. If there is a bad one then exit
+** immediately with the prior srom contents intact (the h/w address will
+** be fixed up later).
+*/
+static void
+DevicePresent(struct net_device *dev, u_long aprom_addr)
+{
+ int i, j=0;
+ struct de4x5_private *lp = netdev_priv(dev);
+
+ if (lp->chipset == DC21040) {
+ if (lp->bus == EISA) {
+ enet_addr_rst(aprom_addr); /* Reset Ethernet Address ROM Pointer */
+ } else {
+ outl(0, aprom_addr); /* Reset Ethernet Address ROM Pointer */
+ }
+ } else { /* Read new srom */
+ u_short tmp;
+ __le16 *p = (__le16 *)((char *)&lp->srom + SROM_HWADD);
+ for (i=0; i<(ETH_ALEN>>1); i++) {
+ tmp = srom_rd(aprom_addr, (SROM_HWADD>>1) + i);
+ j += tmp; /* for check for 0:0:0:0:0:0 or ff:ff:ff:ff:ff:ff */
+ *p = cpu_to_le16(tmp);
+ }
+ if (j == 0 || j == 3 * 0xffff) {
+ /* could get 0 only from all-0 and 3 * 0xffff only from all-1 */
+ return;
+ }
+
+ p = (__le16 *)&lp->srom;
+ for (i=0; i<(sizeof(struct de4x5_srom)>>1); i++) {
+ tmp = srom_rd(aprom_addr, i);
+ *p++ = cpu_to_le16(tmp);
+ }
+ de4x5_dbg_srom((struct de4x5_srom *)&lp->srom);
+ }
+}
+
+/*
+** Since the write on the Enet PROM register doesn't seem to reset the PROM
+** pointer correctly (at least on my DE425 EISA card), this routine should do
+** it...from depca.c.
+*/
+static void
+enet_addr_rst(u_long aprom_addr)
+{
+ union {
+ struct {
+ u32 a;
+ u32 b;
+ } llsig;
+ char Sig[sizeof(u32) << 1];
+ } dev;
+ short sigLength=0;
+ s8 data;
+ int i, j;
+
+ dev.llsig.a = ETH_PROM_SIG;
+ dev.llsig.b = ETH_PROM_SIG;
+ sigLength = sizeof(u32) << 1;
+
+ for (i=0,j=0;j<sigLength && i<PROBE_LENGTH+sigLength-1;i++) {
+ data = inb(aprom_addr);
+ if (dev.Sig[j] == data) { /* track signature */
+ j++;
+ } else { /* lost signature; begin search again */
+ if (data == dev.Sig[0]) { /* rare case.... */
+ j=1;
+ } else {
+ j=0;
+ }
+ }
+ }
+}
+
+/*
+** For the bad status case and no SROM, then add one to the previous
+** address. However, need to add one backwards in case we have 0xff
+** as one or more of the bytes. Only the last 3 bytes should be checked
+** as the first three are invariant - assigned to an organisation.
+*/
+static int
+get_hw_addr(struct net_device *dev)
+{
+ u_long iobase = dev->base_addr;
+ int broken, i, k, tmp, status = 0;
+ u_short j,chksum;
+ struct de4x5_private *lp = netdev_priv(dev);
+
+ broken = de4x5_bad_srom(lp);
+
+ for (i=0,k=0,j=0;j<3;j++) {
+ k <<= 1;
+ if (k > 0xffff) k-=0xffff;
+
+ if (lp->bus == PCI) {
+ if (lp->chipset == DC21040) {
+ while ((tmp = inl(DE4X5_APROM)) < 0);
+ k += (u_char) tmp;
+ dev->dev_addr[i++] = (u_char) tmp;
+ while ((tmp = inl(DE4X5_APROM)) < 0);
+ k += (u_short) (tmp << 8);
+ dev->dev_addr[i++] = (u_char) tmp;
+ } else if (!broken) {
+ dev->dev_addr[i] = (u_char) lp->srom.ieee_addr[i]; i++;
+ dev->dev_addr[i] = (u_char) lp->srom.ieee_addr[i]; i++;
+ } else if ((broken == SMC) || (broken == ACCTON)) {
+ dev->dev_addr[i] = *((u_char *)&lp->srom + i); i++;
+ dev->dev_addr[i] = *((u_char *)&lp->srom + i); i++;
+ }
+ } else {
+ k += (u_char) (tmp = inb(EISA_APROM));
+ dev->dev_addr[i++] = (u_char) tmp;
+ k += (u_short) ((tmp = inb(EISA_APROM)) << 8);
+ dev->dev_addr[i++] = (u_char) tmp;
+ }
+
+ if (k > 0xffff) k-=0xffff;
+ }
+ if (k == 0xffff) k=0;
+
+ if (lp->bus == PCI) {
+ if (lp->chipset == DC21040) {
+ while ((tmp = inl(DE4X5_APROM)) < 0);
+ chksum = (u_char) tmp;
+ while ((tmp = inl(DE4X5_APROM)) < 0);
+ chksum |= (u_short) (tmp << 8);
+ if ((k != chksum) && (dec_only)) status = -1;
+ }
+ } else {
+ chksum = (u_char) inb(EISA_APROM);
+ chksum |= (u_short) (inb(EISA_APROM) << 8);
+ if ((k != chksum) && (dec_only)) status = -1;
+ }
+
+ /* If possible, try to fix a broken card - SMC only so far */
+ srom_repair(dev, broken);
+
+#ifdef CONFIG_PPC_PMAC
+ /*
+ ** If the address starts with 00 a0, we have to bit-reverse
+ ** each byte of the address.
+ */
+ if ( machine_is(powermac) &&
+ (dev->dev_addr[0] == 0) &&
+ (dev->dev_addr[1] == 0xa0) )
+ {
+ for (i = 0; i < ETH_ALEN; ++i)
+ {
+ int x = dev->dev_addr[i];
+ x = ((x & 0xf) << 4) + ((x & 0xf0) >> 4);
+ x = ((x & 0x33) << 2) + ((x & 0xcc) >> 2);
+ dev->dev_addr[i] = ((x & 0x55) << 1) + ((x & 0xaa) >> 1);
+ }
+ }
+#endif /* CONFIG_PPC_PMAC */
+
+ /* Test for a bad enet address */
+ status = test_bad_enet(dev, status);
+
+ return status;
+}
+
+/*
+** Test for enet addresses in the first 32 bytes. The built-in strncmp
+** didn't seem to work here...?
+*/
+static int
+de4x5_bad_srom(struct de4x5_private *lp)
+{
+ int i, status = 0;
+
+ for (i = 0; i < ARRAY_SIZE(enet_det); i++) {
+ if (!de4x5_strncmp((char *)&lp->srom, (char *)&enet_det[i], 3) &&
+ !de4x5_strncmp((char *)&lp->srom+0x10, (char *)&enet_det[i], 3)) {
+ if (i == 0) {
+ status = SMC;
+ } else if (i == 1) {
+ status = ACCTON;
+ }
+ break;
+ }
+ }
+
+ return status;
+}
+
+static int
+de4x5_strncmp(char *a, char *b, int n)
+{
+ int ret=0;
+
+ for (;n && !ret; n--) {
+ ret = *a++ - *b++;
+ }
+
+ return ret;
+}
+
+static void
+srom_repair(struct net_device *dev, int card)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+
+ switch(card) {
+ case SMC:
+ memset((char *)&lp->srom, 0, sizeof(struct de4x5_srom));
+ memcpy(lp->srom.ieee_addr, (char *)dev->dev_addr, ETH_ALEN);
+ memcpy(lp->srom.info, (char *)&srom_repair_info[SMC-1], 100);
+ lp->useSROM = true;
+ break;
+ }
+}
+
+/*
+** Assume that the irq's do not follow the PCI spec - this is seems
+** to be true so far (2 for 2).
+*/
+static int
+test_bad_enet(struct net_device *dev, int status)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ int i, tmp;
+
+ for (tmp=0,i=0; i<ETH_ALEN; i++) tmp += (u_char)dev->dev_addr[i];
+ if ((tmp == 0) || (tmp == 0x5fa)) {
+ if ((lp->chipset == last.chipset) &&
+ (lp->bus_num == last.bus) && (lp->bus_num > 0)) {
+ for (i=0; i<ETH_ALEN; i++) dev->dev_addr[i] = last.addr[i];
+ for (i=ETH_ALEN-1; i>2; --i) {
+ dev->dev_addr[i] += 1;
+ if (dev->dev_addr[i] != 0) break;
+ }
+ for (i=0; i<ETH_ALEN; i++) last.addr[i] = dev->dev_addr[i];
+ if (!an_exception(lp)) {
+ dev->irq = last.irq;
+ }
+
+ status = 0;
+ }
+ } else if (!status) {
+ last.chipset = lp->chipset;
+ last.bus = lp->bus_num;
+ last.irq = dev->irq;
+ for (i=0; i<ETH_ALEN; i++) last.addr[i] = dev->dev_addr[i];
+ }
+
+ return status;
+}
+
+/*
+** List of board exceptions with correctly wired IRQs
+*/
+static int
+an_exception(struct de4x5_private *lp)
+{
+ if ((*(u_short *)lp->srom.sub_vendor_id == 0x00c0) &&
+ (*(u_short *)lp->srom.sub_system_id == 0x95e0)) {
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+** SROM Read
+*/
+static short
+srom_rd(u_long addr, u_char offset)
+{
+ sendto_srom(SROM_RD | SROM_SR, addr);
+
+ srom_latch(SROM_RD | SROM_SR | DT_CS, addr);
+ srom_command(SROM_RD | SROM_SR | DT_IN | DT_CS, addr);
+ srom_address(SROM_RD | SROM_SR | DT_CS, addr, offset);
+
+ return srom_data(SROM_RD | SROM_SR | DT_CS, addr);
+}
+
+static void
+srom_latch(u_int command, u_long addr)
+{
+ sendto_srom(command, addr);
+ sendto_srom(command | DT_CLK, addr);
+ sendto_srom(command, addr);
+}
+
+static void
+srom_command(u_int command, u_long addr)
+{
+ srom_latch(command, addr);
+ srom_latch(command, addr);
+ srom_latch((command & 0x0000ff00) | DT_CS, addr);
+}
+
+static void
+srom_address(u_int command, u_long addr, u_char offset)
+{
+ int i, a;
+
+ a = offset << 2;
+ for (i=0; i<6; i++, a <<= 1) {
+ srom_latch(command | ((a & 0x80) ? DT_IN : 0), addr);
+ }
+ udelay(1);
+
+ i = (getfrom_srom(addr) >> 3) & 0x01;
+}
+
+static short
+srom_data(u_int command, u_long addr)
+{
+ int i;
+ short word = 0;
+ s32 tmp;
+
+ for (i=0; i<16; i++) {
+ sendto_srom(command | DT_CLK, addr);
+ tmp = getfrom_srom(addr);
+ sendto_srom(command, addr);
+
+ word = (word << 1) | ((tmp >> 3) & 0x01);
+ }
+
+ sendto_srom(command & 0x0000ff00, addr);
+
+ return word;
+}
+
+/*
+static void
+srom_busy(u_int command, u_long addr)
+{
+ sendto_srom((command & 0x0000ff00) | DT_CS, addr);
+
+ while (!((getfrom_srom(addr) >> 3) & 0x01)) {
+ mdelay(1);
+ }
+
+ sendto_srom(command & 0x0000ff00, addr);
+}
+*/
+
+static void
+sendto_srom(u_int command, u_long addr)
+{
+ outl(command, addr);
+ udelay(1);
+}
+
+static int
+getfrom_srom(u_long addr)
+{
+ s32 tmp;
+
+ tmp = inl(addr);
+ udelay(1);
+
+ return tmp;
+}
+
+static int
+srom_infoleaf_info(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ int i, count;
+ u_char *p;
+
+ /* Find the infoleaf decoder function that matches this chipset */
+ for (i=0; i<INFOLEAF_SIZE; i++) {
+ if (lp->chipset == infoleaf_array[i].chipset) break;
+ }
+ if (i == INFOLEAF_SIZE) {
+ lp->useSROM = false;
+ printk("%s: Cannot find correct chipset for SROM decoding!\n",
+ dev->name);
+ return -ENXIO;
+ }
+
+ lp->infoleaf_fn = infoleaf_array[i].fn;
+
+ /* Find the information offset that this function should use */
+ count = *((u_char *)&lp->srom + 19);
+ p = (u_char *)&lp->srom + 26;
+
+ if (count > 1) {
+ for (i=count; i; --i, p+=3) {
+ if (lp->device == *p) break;
+ }
+ if (i == 0) {
+ lp->useSROM = false;
+ printk("%s: Cannot find correct PCI device [%d] for SROM decoding!\n",
+ dev->name, lp->device);
+ return -ENXIO;
+ }
+ }
+
+ lp->infoleaf_offset = get_unaligned_le16(p + 1);
+
+ return 0;
+}
+
+/*
+** This routine loads any type 1 or 3 MII info into the mii device
+** struct and executes any type 5 code to reset PHY devices for this
+** controller.
+** The info for the MII devices will be valid since the index used
+** will follow the discovery process from MII address 1-31 then 0.
+*/
+static void
+srom_init(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset;
+ u_char count;
+
+ p+=2;
+ if (lp->chipset == DC21140) {
+ lp->cache.gepc = (*p++ | GEP_CTRL);
+ gep_wr(lp->cache.gepc, dev);
+ }
+
+ /* Block count */
+ count = *p++;
+
+ /* Jump the infoblocks to find types */
+ for (;count; --count) {
+ if (*p < 128) {
+ p += COMPACT_LEN;
+ } else if (*(p+1) == 5) {
+ type5_infoblock(dev, 1, p);
+ p += ((*p & BLOCK_LEN) + 1);
+ } else if (*(p+1) == 4) {
+ p += ((*p & BLOCK_LEN) + 1);
+ } else if (*(p+1) == 3) {
+ type3_infoblock(dev, 1, p);
+ p += ((*p & BLOCK_LEN) + 1);
+ } else if (*(p+1) == 2) {
+ p += ((*p & BLOCK_LEN) + 1);
+ } else if (*(p+1) == 1) {
+ type1_infoblock(dev, 1, p);
+ p += ((*p & BLOCK_LEN) + 1);
+ } else {
+ p += ((*p & BLOCK_LEN) + 1);
+ }
+ }
+}
+
+/*
+** A generic routine that writes GEP control, data and reset information
+** to the GEP register (21140) or csr15 GEP portion (2114[23]).
+*/
+static void
+srom_exec(struct net_device *dev, u_char *p)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ u_char count = (p ? *p++ : 0);
+ u_short *w = (u_short *)p;
+
+ if (((lp->ibn != 1) && (lp->ibn != 3) && (lp->ibn != 5)) || !count) return;
+
+ if (lp->chipset != DC21140) RESET_SIA;
+
+ while (count--) {
+ gep_wr(((lp->chipset==DC21140) && (lp->ibn!=5) ?
+ *p++ : get_unaligned_le16(w++)), dev);
+ mdelay(2); /* 2ms per action */
+ }
+
+ if (lp->chipset != DC21140) {
+ outl(lp->cache.csr14, DE4X5_STRR);
+ outl(lp->cache.csr13, DE4X5_SICR);
+ }
+}
+
+/*
+** Basically this function is a NOP since it will never be called,
+** unless I implement the DC21041 SROM functions. There's no need
+** since the existing code will be satisfactory for all boards.
+*/
+static int
+dc21041_infoleaf(struct net_device *dev)
+{
+ return DE4X5_AUTOSENSE_MS;
+}
+
+static int
+dc21140_infoleaf(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_char count = 0;
+ u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset;
+ int next_tick = DE4X5_AUTOSENSE_MS;
+
+ /* Read the connection type */
+ p+=2;
+
+ /* GEP control */
+ lp->cache.gepc = (*p++ | GEP_CTRL);
+
+ /* Block count */
+ count = *p++;
+
+ /* Recursively figure out the info blocks */
+ if (*p < 128) {
+ next_tick = dc_infoblock[COMPACT](dev, count, p);
+ } else {
+ next_tick = dc_infoblock[*(p+1)](dev, count, p);
+ }
+
+ if (lp->tcount == count) {
+ lp->media = NC;
+ if (lp->media != lp->c_media) {
+ de4x5_dbg_media(dev);
+ lp->c_media = lp->media;
+ }
+ lp->media = INIT;
+ lp->tcount = 0;
+ lp->tx_enable = false;
+ }
+
+ return next_tick & ~TIMER_CB;
+}
+
+static int
+dc21142_infoleaf(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_char count = 0;
+ u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset;
+ int next_tick = DE4X5_AUTOSENSE_MS;
+
+ /* Read the connection type */
+ p+=2;
+
+ /* Block count */
+ count = *p++;
+
+ /* Recursively figure out the info blocks */
+ if (*p < 128) {
+ next_tick = dc_infoblock[COMPACT](dev, count, p);
+ } else {
+ next_tick = dc_infoblock[*(p+1)](dev, count, p);
+ }
+
+ if (lp->tcount == count) {
+ lp->media = NC;
+ if (lp->media != lp->c_media) {
+ de4x5_dbg_media(dev);
+ lp->c_media = lp->media;
+ }
+ lp->media = INIT;
+ lp->tcount = 0;
+ lp->tx_enable = false;
+ }
+
+ return next_tick & ~TIMER_CB;
+}
+
+static int
+dc21143_infoleaf(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_char count = 0;
+ u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset;
+ int next_tick = DE4X5_AUTOSENSE_MS;
+
+ /* Read the connection type */
+ p+=2;
+
+ /* Block count */
+ count = *p++;
+
+ /* Recursively figure out the info blocks */
+ if (*p < 128) {
+ next_tick = dc_infoblock[COMPACT](dev, count, p);
+ } else {
+ next_tick = dc_infoblock[*(p+1)](dev, count, p);
+ }
+ if (lp->tcount == count) {
+ lp->media = NC;
+ if (lp->media != lp->c_media) {
+ de4x5_dbg_media(dev);
+ lp->c_media = lp->media;
+ }
+ lp->media = INIT;
+ lp->tcount = 0;
+ lp->tx_enable = false;
+ }
+
+ return next_tick & ~TIMER_CB;
+}
+
+/*
+** The compact infoblock is only designed for DC21140[A] chips, so
+** we'll reuse the dc21140m_autoconf function. Non MII media only.
+*/
+static int
+compact_infoblock(struct net_device *dev, u_char count, u_char *p)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_char flags, csr6;
+
+ /* Recursively figure out the info blocks */
+ if (--count > lp->tcount) {
+ if (*(p+COMPACT_LEN) < 128) {
+ return dc_infoblock[COMPACT](dev, count, p+COMPACT_LEN);
+ } else {
+ return dc_infoblock[*(p+COMPACT_LEN+1)](dev, count, p+COMPACT_LEN);
+ }
+ }
+
+ if ((lp->media == INIT) && (lp->timeout < 0)) {
+ lp->ibn = COMPACT;
+ lp->active = 0;
+ gep_wr(lp->cache.gepc, dev);
+ lp->infoblock_media = (*p++) & COMPACT_MC;
+ lp->cache.gep = *p++;
+ csr6 = *p++;
+ flags = *p++;
+
+ lp->asBitValid = (flags & 0x80) ? 0 : -1;
+ lp->defMedium = (flags & 0x40) ? -1 : 0;
+ lp->asBit = 1 << ((csr6 >> 1) & 0x07);
+ lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit;
+ lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18);
+ lp->useMII = false;
+
+ de4x5_switch_mac_port(dev);
+ }
+
+ return dc21140m_autoconf(dev);
+}
+
+/*
+** This block describes non MII media for the DC21140[A] only.
+*/
+static int
+type0_infoblock(struct net_device *dev, u_char count, u_char *p)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_char flags, csr6, len = (*p & BLOCK_LEN)+1;
+
+ /* Recursively figure out the info blocks */
+ if (--count > lp->tcount) {
+ if (*(p+len) < 128) {
+ return dc_infoblock[COMPACT](dev, count, p+len);
+ } else {
+ return dc_infoblock[*(p+len+1)](dev, count, p+len);
+ }
+ }
+
+ if ((lp->media == INIT) && (lp->timeout < 0)) {
+ lp->ibn = 0;
+ lp->active = 0;
+ gep_wr(lp->cache.gepc, dev);
+ p+=2;
+ lp->infoblock_media = (*p++) & BLOCK0_MC;
+ lp->cache.gep = *p++;
+ csr6 = *p++;
+ flags = *p++;
+
+ lp->asBitValid = (flags & 0x80) ? 0 : -1;
+ lp->defMedium = (flags & 0x40) ? -1 : 0;
+ lp->asBit = 1 << ((csr6 >> 1) & 0x07);
+ lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit;
+ lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18);
+ lp->useMII = false;
+
+ de4x5_switch_mac_port(dev);
+ }
+
+ return dc21140m_autoconf(dev);
+}
+
+/* These functions are under construction! */
+
+static int
+type1_infoblock(struct net_device *dev, u_char count, u_char *p)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_char len = (*p & BLOCK_LEN)+1;
+
+ /* Recursively figure out the info blocks */
+ if (--count > lp->tcount) {
+ if (*(p+len) < 128) {
+ return dc_infoblock[COMPACT](dev, count, p+len);
+ } else {
+ return dc_infoblock[*(p+len+1)](dev, count, p+len);
+ }
+ }
+
+ p += 2;
+ if (lp->state == INITIALISED) {
+ lp->ibn = 1;
+ lp->active = *p++;
+ lp->phy[lp->active].gep = (*p ? p : NULL); p += (*p + 1);
+ lp->phy[lp->active].rst = (*p ? p : NULL); p += (*p + 1);
+ lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2;
+ lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2;
+ lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2;
+ lp->phy[lp->active].ttm = get_unaligned_le16(p);
+ return 0;
+ } else if ((lp->media == INIT) && (lp->timeout < 0)) {
+ lp->ibn = 1;
+ lp->active = *p;
+ lp->infoblock_csr6 = OMR_MII_100;
+ lp->useMII = true;
+ lp->infoblock_media = ANS;
+
+ de4x5_switch_mac_port(dev);
+ }
+
+ return dc21140m_autoconf(dev);
+}
+
+static int
+type2_infoblock(struct net_device *dev, u_char count, u_char *p)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_char len = (*p & BLOCK_LEN)+1;
+
+ /* Recursively figure out the info blocks */
+ if (--count > lp->tcount) {
+ if (*(p+len) < 128) {
+ return dc_infoblock[COMPACT](dev, count, p+len);
+ } else {
+ return dc_infoblock[*(p+len+1)](dev, count, p+len);
+ }
+ }
+
+ if ((lp->media == INIT) && (lp->timeout < 0)) {
+ lp->ibn = 2;
+ lp->active = 0;
+ p += 2;
+ lp->infoblock_media = (*p) & MEDIA_CODE;
+
+ if ((*p++) & EXT_FIELD) {
+ lp->cache.csr13 = get_unaligned_le16(p); p += 2;
+ lp->cache.csr14 = get_unaligned_le16(p); p += 2;
+ lp->cache.csr15 = get_unaligned_le16(p); p += 2;
+ } else {
+ lp->cache.csr13 = CSR13;
+ lp->cache.csr14 = CSR14;
+ lp->cache.csr15 = CSR15;
+ }
+ lp->cache.gepc = ((s32)(get_unaligned_le16(p)) << 16); p += 2;
+ lp->cache.gep = ((s32)(get_unaligned_le16(p)) << 16);
+ lp->infoblock_csr6 = OMR_SIA;
+ lp->useMII = false;
+
+ de4x5_switch_mac_port(dev);
+ }
+
+ return dc2114x_autoconf(dev);
+}
+
+static int
+type3_infoblock(struct net_device *dev, u_char count, u_char *p)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_char len = (*p & BLOCK_LEN)+1;
+
+ /* Recursively figure out the info blocks */
+ if (--count > lp->tcount) {
+ if (*(p+len) < 128) {
+ return dc_infoblock[COMPACT](dev, count, p+len);
+ } else {
+ return dc_infoblock[*(p+len+1)](dev, count, p+len);
+ }
+ }
+
+ p += 2;
+ if (lp->state == INITIALISED) {
+ lp->ibn = 3;
+ lp->active = *p++;
+ if (MOTO_SROM_BUG) lp->active = 0;
+ lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1);
+ lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1);
+ lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2;
+ lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2;
+ lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2;
+ lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2;
+ lp->phy[lp->active].mci = *p;
+ return 0;
+ } else if ((lp->media == INIT) && (lp->timeout < 0)) {
+ lp->ibn = 3;
+ lp->active = *p;
+ if (MOTO_SROM_BUG) lp->active = 0;
+ lp->infoblock_csr6 = OMR_MII_100;
+ lp->useMII = true;
+ lp->infoblock_media = ANS;
+
+ de4x5_switch_mac_port(dev);
+ }
+
+ return dc2114x_autoconf(dev);
+}
+
+static int
+type4_infoblock(struct net_device *dev, u_char count, u_char *p)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_char flags, csr6, len = (*p & BLOCK_LEN)+1;
+
+ /* Recursively figure out the info blocks */
+ if (--count > lp->tcount) {
+ if (*(p+len) < 128) {
+ return dc_infoblock[COMPACT](dev, count, p+len);
+ } else {
+ return dc_infoblock[*(p+len+1)](dev, count, p+len);
+ }
+ }
+
+ if ((lp->media == INIT) && (lp->timeout < 0)) {
+ lp->ibn = 4;
+ lp->active = 0;
+ p+=2;
+ lp->infoblock_media = (*p++) & MEDIA_CODE;
+ lp->cache.csr13 = CSR13; /* Hard coded defaults */
+ lp->cache.csr14 = CSR14;
+ lp->cache.csr15 = CSR15;
+ lp->cache.gepc = ((s32)(get_unaligned_le16(p)) << 16); p += 2;
+ lp->cache.gep = ((s32)(get_unaligned_le16(p)) << 16); p += 2;
+ csr6 = *p++;
+ flags = *p++;
+
+ lp->asBitValid = (flags & 0x80) ? 0 : -1;
+ lp->defMedium = (flags & 0x40) ? -1 : 0;
+ lp->asBit = 1 << ((csr6 >> 1) & 0x07);
+ lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit;
+ lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18);
+ lp->useMII = false;
+
+ de4x5_switch_mac_port(dev);
+ }
+
+ return dc2114x_autoconf(dev);
+}
+
+/*
+** This block type provides information for resetting external devices
+** (chips) through the General Purpose Register.
+*/
+static int
+type5_infoblock(struct net_device *dev, u_char count, u_char *p)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_char len = (*p & BLOCK_LEN)+1;
+
+ /* Recursively figure out the info blocks */
+ if (--count > lp->tcount) {
+ if (*(p+len) < 128) {
+ return dc_infoblock[COMPACT](dev, count, p+len);
+ } else {
+ return dc_infoblock[*(p+len+1)](dev, count, p+len);
+ }
+ }
+
+ /* Must be initializing to run this code */
+ if ((lp->state == INITIALISED) || (lp->media == INIT)) {
+ p+=2;
+ lp->rst = p;
+ srom_exec(dev, lp->rst);
+ }
+
+ return DE4X5_AUTOSENSE_MS;
+}
+
+/*
+** MII Read/Write
+*/
+
+static int
+mii_rd(u_char phyreg, u_char phyaddr, u_long ioaddr)
+{
+ mii_wdata(MII_PREAMBLE, 2, ioaddr); /* Start of 34 bit preamble... */
+ mii_wdata(MII_PREAMBLE, 32, ioaddr); /* ...continued */
+ mii_wdata(MII_STRD, 4, ioaddr); /* SFD and Read operation */
+ mii_address(phyaddr, ioaddr); /* PHY address to be accessed */
+ mii_address(phyreg, ioaddr); /* PHY Register to read */
+ mii_ta(MII_STRD, ioaddr); /* Turn around time - 2 MDC */
+
+ return mii_rdata(ioaddr); /* Read data */
+}
+
+static void
+mii_wr(int data, u_char phyreg, u_char phyaddr, u_long ioaddr)
+{
+ mii_wdata(MII_PREAMBLE, 2, ioaddr); /* Start of 34 bit preamble... */
+ mii_wdata(MII_PREAMBLE, 32, ioaddr); /* ...continued */
+ mii_wdata(MII_STWR, 4, ioaddr); /* SFD and Write operation */
+ mii_address(phyaddr, ioaddr); /* PHY address to be accessed */
+ mii_address(phyreg, ioaddr); /* PHY Register to write */
+ mii_ta(MII_STWR, ioaddr); /* Turn around time - 2 MDC */
+ data = mii_swap(data, 16); /* Swap data bit ordering */
+ mii_wdata(data, 16, ioaddr); /* Write data */
+}
+
+static int
+mii_rdata(u_long ioaddr)
+{
+ int i;
+ s32 tmp = 0;
+
+ for (i=0; i<16; i++) {
+ tmp <<= 1;
+ tmp |= getfrom_mii(MII_MRD | MII_RD, ioaddr);
+ }
+
+ return tmp;
+}
+
+static void
+mii_wdata(int data, int len, u_long ioaddr)
+{
+ int i;
+
+ for (i=0; i<len; i++) {
+ sendto_mii(MII_MWR | MII_WR, data, ioaddr);
+ data >>= 1;
+ }
+}
+
+static void
+mii_address(u_char addr, u_long ioaddr)
+{
+ int i;
+
+ addr = mii_swap(addr, 5);
+ for (i=0; i<5; i++) {
+ sendto_mii(MII_MWR | MII_WR, addr, ioaddr);
+ addr >>= 1;
+ }
+}
+
+static void
+mii_ta(u_long rw, u_long ioaddr)
+{
+ if (rw == MII_STWR) {
+ sendto_mii(MII_MWR | MII_WR, 1, ioaddr);
+ sendto_mii(MII_MWR | MII_WR, 0, ioaddr);
+ } else {
+ getfrom_mii(MII_MRD | MII_RD, ioaddr); /* Tri-state MDIO */
+ }
+}
+
+static int
+mii_swap(int data, int len)
+{
+ int i, tmp = 0;
+
+ for (i=0; i<len; i++) {
+ tmp <<= 1;
+ tmp |= (data & 1);
+ data >>= 1;
+ }
+
+ return tmp;
+}
+
+static void
+sendto_mii(u32 command, int data, u_long ioaddr)
+{
+ u32 j;
+
+ j = (data & 1) << 17;
+ outl(command | j, ioaddr);
+ udelay(1);
+ outl(command | MII_MDC | j, ioaddr);
+ udelay(1);
+}
+
+static int
+getfrom_mii(u32 command, u_long ioaddr)
+{
+ outl(command, ioaddr);
+ udelay(1);
+ outl(command | MII_MDC, ioaddr);
+ udelay(1);
+
+ return (inl(ioaddr) >> 19) & 1;
+}
+
+/*
+** Here's 3 ways to calculate the OUI from the ID registers.
+*/
+static int
+mii_get_oui(u_char phyaddr, u_long ioaddr)
+{
+/*
+ union {
+ u_short reg;
+ u_char breg[2];
+ } a;
+ int i, r2, r3, ret=0;*/
+ int r2, r3;
+
+ /* Read r2 and r3 */
+ r2 = mii_rd(MII_ID0, phyaddr, ioaddr);
+ r3 = mii_rd(MII_ID1, phyaddr, ioaddr);
+ /* SEEQ and Cypress way * /
+ / * Shuffle r2 and r3 * /
+ a.reg=0;
+ r3 = ((r3>>10)|(r2<<6))&0x0ff;
+ r2 = ((r2>>2)&0x3fff);
+
+ / * Bit reverse r3 * /
+ for (i=0;i<8;i++) {
+ ret<<=1;
+ ret |= (r3&1);
+ r3>>=1;
+ }
+
+ / * Bit reverse r2 * /
+ for (i=0;i<16;i++) {
+ a.reg<<=1;
+ a.reg |= (r2&1);
+ r2>>=1;
+ }
+
+ / * Swap r2 bytes * /
+ i=a.breg[0];
+ a.breg[0]=a.breg[1];
+ a.breg[1]=i;
+
+ return (a.reg<<8)|ret; */ /* SEEQ and Cypress way */
+/* return (r2<<6)|(u_int)(r3>>10); */ /* NATIONAL and BROADCOM way */
+ return r2; /* (I did it) My way */
+}
+
+/*
+** The SROM spec forces us to search addresses [1-31 0]. Bummer.
+*/
+static int
+mii_get_phy(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ int i, j, k, n, limit=ARRAY_SIZE(phy_info);
+ int id;
+
+ lp->active = 0;
+ lp->useMII = true;
+
+ /* Search the MII address space for possible PHY devices */
+ for (n=0, lp->mii_cnt=0, i=1; !((i==1) && (n==1)); i=(i+1)%DE4X5_MAX_MII) {
+ lp->phy[lp->active].addr = i;
+ if (i==0) n++; /* Count cycles */
+ while (de4x5_reset_phy(dev)<0) udelay(100);/* Wait for reset */
+ id = mii_get_oui(i, DE4X5_MII);
+ if ((id == 0) || (id == 65535)) continue; /* Valid ID? */
+ for (j=0; j<limit; j++) { /* Search PHY table */
+ if (id != phy_info[j].id) continue; /* ID match? */
+ for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++);
+ if (k < DE4X5_MAX_PHY) {
+ memcpy((char *)&lp->phy[k],
+ (char *)&phy_info[j], sizeof(struct phy_table));
+ lp->phy[k].addr = i;
+ lp->mii_cnt++;
+ lp->active++;
+ } else {
+ goto purgatory; /* Stop the search */
+ }
+ break;
+ }
+ if ((j == limit) && (i < DE4X5_MAX_MII)) {
+ for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++);
+ lp->phy[k].addr = i;
+ lp->phy[k].id = id;
+ lp->phy[k].spd.reg = GENERIC_REG; /* ANLPA register */
+ lp->phy[k].spd.mask = GENERIC_MASK; /* 100Mb/s technologies */
+ lp->phy[k].spd.value = GENERIC_VALUE; /* TX & T4, H/F Duplex */
+ lp->mii_cnt++;
+ lp->active++;
+ printk("%s: Using generic MII device control. If the board doesn't operate,\nplease mail the following dump to the author:\n", dev->name);
+ j = de4x5_debug;
+ de4x5_debug |= DEBUG_MII;
+ de4x5_dbg_mii(dev, k);
+ de4x5_debug = j;
+ printk("\n");
+ }
+ }
+ purgatory:
+ lp->active = 0;
+ if (lp->phy[0].id) { /* Reset the PHY devices */
+ for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++) { /*For each PHY*/
+ mii_wr(MII_CR_RST, MII_CR, lp->phy[k].addr, DE4X5_MII);
+ while (mii_rd(MII_CR, lp->phy[k].addr, DE4X5_MII) & MII_CR_RST);
+
+ de4x5_dbg_mii(dev, k);
+ }
+ }
+ if (!lp->mii_cnt) lp->useMII = false;
+
+ return lp->mii_cnt;
+}
+
+static char *
+build_setup_frame(struct net_device *dev, int mode)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ int i;
+ char *pa = lp->setup_frame;
+
+ /* Initialise the setup frame */
+ if (mode == ALL) {
+ memset(lp->setup_frame, 0, SETUP_FRAME_LEN);
+ }
+
+ if (lp->setup_f == HASH_PERF) {
+ for (pa=lp->setup_frame+IMPERF_PA_OFFSET, i=0; i<ETH_ALEN; i++) {
+ *(pa + i) = dev->dev_addr[i]; /* Host address */
+ if (i & 0x01) pa += 2;
+ }
+ *(lp->setup_frame + (HASH_TABLE_LEN >> 3) - 3) = 0x80;
+ } else {
+ for (i=0; i<ETH_ALEN; i++) { /* Host address */
+ *(pa + (i&1)) = dev->dev_addr[i];
+ if (i & 0x01) pa += 4;
+ }
+ for (i=0; i<ETH_ALEN; i++) { /* Broadcast address */
+ *(pa + (i&1)) = (char) 0xff;
+ if (i & 0x01) pa += 4;
+ }
+ }
+
+ return pa; /* Points to the next entry */
+}
+
+static void
+disable_ast(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ del_timer_sync(&lp->timer);
+}
+
+static long
+de4x5_switch_mac_port(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ s32 omr;
+
+ STOP_DE4X5;
+
+ /* Assert the OMR_PS bit in CSR6 */
+ omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR |
+ OMR_FDX));
+ omr |= lp->infoblock_csr6;
+ if (omr & OMR_PS) omr |= OMR_HBD;
+ outl(omr, DE4X5_OMR);
+
+ /* Soft Reset */
+ RESET_DE4X5;
+
+ /* Restore the GEP - especially for COMPACT and Type 0 Infoblocks */
+ if (lp->chipset == DC21140) {
+ gep_wr(lp->cache.gepc, dev);
+ gep_wr(lp->cache.gep, dev);
+ } else if ((lp->chipset & ~0x0ff) == DC2114x) {
+ reset_init_sia(dev, lp->cache.csr13, lp->cache.csr14, lp->cache.csr15);
+ }
+
+ /* Restore CSR6 */
+ outl(omr, DE4X5_OMR);
+
+ /* Reset CSR8 */
+ inl(DE4X5_MFC);
+
+ return omr;
+}
+
+static void
+gep_wr(s32 data, struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+
+ if (lp->chipset == DC21140) {
+ outl(data, DE4X5_GEP);
+ } else if ((lp->chipset & ~0x00ff) == DC2114x) {
+ outl((data<<16) | lp->cache.csr15, DE4X5_SIGR);
+ }
+}
+
+static int
+gep_rd(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+
+ if (lp->chipset == DC21140) {
+ return inl(DE4X5_GEP);
+ } else if ((lp->chipset & ~0x00ff) == DC2114x) {
+ return inl(DE4X5_SIGR) & 0x000fffff;
+ }
+
+ return 0;
+}
+
+static void
+yawn(struct net_device *dev, int state)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+
+ if ((lp->chipset == DC21040) || (lp->chipset == DC21140)) return;
+
+ if(lp->bus == EISA) {
+ switch(state) {
+ case WAKEUP:
+ outb(WAKEUP, PCI_CFPM);
+ mdelay(10);
+ break;
+
+ case SNOOZE:
+ outb(SNOOZE, PCI_CFPM);
+ break;
+
+ case SLEEP:
+ outl(0, DE4X5_SICR);
+ outb(SLEEP, PCI_CFPM);
+ break;
+ }
+ } else {
+ struct pci_dev *pdev = to_pci_dev (lp->gendev);
+ switch(state) {
+ case WAKEUP:
+ pci_write_config_byte(pdev, PCI_CFDA_PSM, WAKEUP);
+ mdelay(10);
+ break;
+
+ case SNOOZE:
+ pci_write_config_byte(pdev, PCI_CFDA_PSM, SNOOZE);
+ break;
+
+ case SLEEP:
+ outl(0, DE4X5_SICR);
+ pci_write_config_byte(pdev, PCI_CFDA_PSM, SLEEP);
+ break;
+ }
+ }
+}
+
+static void
+de4x5_parse_params(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ char *p, *q, t;
+
+ lp->params.fdx = 0;
+ lp->params.autosense = AUTO;
+
+ if (args == NULL) return;
+
+ if ((p = strstr(args, dev->name))) {
+ if (!(q = strstr(p+strlen(dev->name), "eth"))) q = p + strlen(p);
+ t = *q;
+ *q = '\0';
+
+ if (strstr(p, "fdx") || strstr(p, "FDX")) lp->params.fdx = 1;
+
+ if (strstr(p, "autosense") || strstr(p, "AUTOSENSE")) {
+ if (strstr(p, "TP")) {
+ lp->params.autosense = TP;
+ } else if (strstr(p, "TP_NW")) {
+ lp->params.autosense = TP_NW;
+ } else if (strstr(p, "BNC")) {
+ lp->params.autosense = BNC;
+ } else if (strstr(p, "AUI")) {
+ lp->params.autosense = AUI;
+ } else if (strstr(p, "BNC_AUI")) {
+ lp->params.autosense = BNC;
+ } else if (strstr(p, "10Mb")) {
+ lp->params.autosense = _10Mb;
+ } else if (strstr(p, "100Mb")) {
+ lp->params.autosense = _100Mb;
+ } else if (strstr(p, "AUTO")) {
+ lp->params.autosense = AUTO;
+ }
+ }
+ *q = t;
+ }
+}
+
+static void
+de4x5_dbg_open(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ int i;
+
+ if (de4x5_debug & DEBUG_OPEN) {
+ printk("%s: de4x5 opening with irq %d\n",dev->name,dev->irq);
+ printk("\tphysical address: ");
+ for (i=0;i<6;i++) {
+ printk("%2.2x:",(short)dev->dev_addr[i]);
+ }
+ printk("\n");
+ printk("Descriptor head addresses:\n");
+ printk("\t0x%8.8lx 0x%8.8lx\n",(u_long)lp->rx_ring,(u_long)lp->tx_ring);
+ printk("Descriptor addresses:\nRX: ");
+ for (i=0;i<lp->rxRingSize-1;i++){
+ if (i < 3) {
+ printk("0x%8.8lx ",(u_long)&lp->rx_ring[i].status);
+ }
+ }
+ printk("...0x%8.8lx\n",(u_long)&lp->rx_ring[i].status);
+ printk("TX: ");
+ for (i=0;i<lp->txRingSize-1;i++){
+ if (i < 3) {
+ printk("0x%8.8lx ", (u_long)&lp->tx_ring[i].status);
+ }
+ }
+ printk("...0x%8.8lx\n", (u_long)&lp->tx_ring[i].status);
+ printk("Descriptor buffers:\nRX: ");
+ for (i=0;i<lp->rxRingSize-1;i++){
+ if (i < 3) {
+ printk("0x%8.8x ",le32_to_cpu(lp->rx_ring[i].buf));
+ }
+ }
+ printk("...0x%8.8x\n",le32_to_cpu(lp->rx_ring[i].buf));
+ printk("TX: ");
+ for (i=0;i<lp->txRingSize-1;i++){
+ if (i < 3) {
+ printk("0x%8.8x ", le32_to_cpu(lp->tx_ring[i].buf));
+ }
+ }
+ printk("...0x%8.8x\n", le32_to_cpu(lp->tx_ring[i].buf));
+ printk("Ring size:\nRX: %d\nTX: %d\n",
+ (short)lp->rxRingSize,
+ (short)lp->txRingSize);
+ }
+}
+
+static void
+de4x5_dbg_mii(struct net_device *dev, int k)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+
+ if (de4x5_debug & DEBUG_MII) {
+ printk("\nMII device address: %d\n", lp->phy[k].addr);
+ printk("MII CR: %x\n",mii_rd(MII_CR,lp->phy[k].addr,DE4X5_MII));
+ printk("MII SR: %x\n",mii_rd(MII_SR,lp->phy[k].addr,DE4X5_MII));
+ printk("MII ID0: %x\n",mii_rd(MII_ID0,lp->phy[k].addr,DE4X5_MII));
+ printk("MII ID1: %x\n",mii_rd(MII_ID1,lp->phy[k].addr,DE4X5_MII));
+ if (lp->phy[k].id != BROADCOM_T4) {
+ printk("MII ANA: %x\n",mii_rd(0x04,lp->phy[k].addr,DE4X5_MII));
+ printk("MII ANC: %x\n",mii_rd(0x05,lp->phy[k].addr,DE4X5_MII));
+ }
+ printk("MII 16: %x\n",mii_rd(0x10,lp->phy[k].addr,DE4X5_MII));
+ if (lp->phy[k].id != BROADCOM_T4) {
+ printk("MII 17: %x\n",mii_rd(0x11,lp->phy[k].addr,DE4X5_MII));
+ printk("MII 18: %x\n",mii_rd(0x12,lp->phy[k].addr,DE4X5_MII));
+ } else {
+ printk("MII 20: %x\n",mii_rd(0x14,lp->phy[k].addr,DE4X5_MII));
+ }
+ }
+}
+
+static void
+de4x5_dbg_media(struct net_device *dev)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+
+ if (lp->media != lp->c_media) {
+ if (de4x5_debug & DEBUG_MEDIA) {
+ printk("%s: media is %s%s\n", dev->name,
+ (lp->media == NC ? "unconnected, link down or incompatible connection" :
+ (lp->media == TP ? "TP" :
+ (lp->media == ANS ? "TP/Nway" :
+ (lp->media == BNC ? "BNC" :
+ (lp->media == AUI ? "AUI" :
+ (lp->media == BNC_AUI ? "BNC/AUI" :
+ (lp->media == EXT_SIA ? "EXT SIA" :
+ (lp->media == _100Mb ? "100Mb/s" :
+ (lp->media == _10Mb ? "10Mb/s" :
+ "???"
+ ))))))))), (lp->fdx?" full duplex.":"."));
+ }
+ lp->c_media = lp->media;
+ }
+}
+
+static void
+de4x5_dbg_srom(struct de4x5_srom *p)
+{
+ int i;
+
+ if (de4x5_debug & DEBUG_SROM) {
+ printk("Sub-system Vendor ID: %04x\n", *((u_short *)p->sub_vendor_id));
+ printk("Sub-system ID: %04x\n", *((u_short *)p->sub_system_id));
+ printk("ID Block CRC: %02x\n", (u_char)(p->id_block_crc));
+ printk("SROM version: %02x\n", (u_char)(p->version));
+ printk("# controllers: %02x\n", (u_char)(p->num_controllers));
+
+ printk("Hardware Address: %pM\n", p->ieee_addr);
+ printk("CRC checksum: %04x\n", (u_short)(p->chksum));
+ for (i=0; i<64; i++) {
+ printk("%3d %04x\n", i<<1, (u_short)*((u_short *)p+i));
+ }
+ }
+}
+
+static void
+de4x5_dbg_rx(struct sk_buff *skb, int len)
+{
+ int i, j;
+
+ if (de4x5_debug & DEBUG_RX) {
+ printk("R: %pM <- %pM len/SAP:%02x%02x [%d]\n",
+ skb->data, &skb->data[6],
+ (u_char)skb->data[12],
+ (u_char)skb->data[13],
+ len);
+ for (j=0; len>0;j+=16, len-=16) {
+ printk(" %03x: ",j);
+ for (i=0; i<16 && i<len; i++) {
+ printk("%02x ",(u_char)skb->data[i+j]);
+ }
+ printk("\n");
+ }
+ }
+}
+
+/*
+** Perform IOCTL call functions here. Some are privileged operations and the
+** effective uid is checked in those cases. In the normal course of events
+** this function is only used for my testing.
+*/
+static int
+de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct de4x5_private *lp = netdev_priv(dev);
+ struct de4x5_ioctl *ioc = (struct de4x5_ioctl *) &rq->ifr_ifru;
+ u_long iobase = dev->base_addr;
+ int i, j, status = 0;
+ s32 omr;
+ union {
+ u8 addr[144];
+ u16 sval[72];
+ u32 lval[36];
+ } tmp;
+ u_long flags = 0;
+
+ switch(ioc->cmd) {
+ case DE4X5_GET_HWADDR: /* Get the hardware address */
+ ioc->len = ETH_ALEN;
+ for (i=0; i<ETH_ALEN; i++) {
+ tmp.addr[i] = dev->dev_addr[i];
+ }
+ if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT;
+ break;
+
+ case DE4X5_SET_HWADDR: /* Set the hardware address */
+ if (!capable(CAP_NET_ADMIN)) return -EPERM;
+ if (copy_from_user(tmp.addr, ioc->data, ETH_ALEN)) return -EFAULT;
+ if (netif_queue_stopped(dev))
+ return -EBUSY;
+ netif_stop_queue(dev);
+ for (i=0; i<ETH_ALEN; i++) {
+ dev->dev_addr[i] = tmp.addr[i];
+ }
+ build_setup_frame(dev, PHYS_ADDR_ONLY);
+ /* Set up the descriptor and give ownership to the card */
+ load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET |
+ SETUP_FRAME_LEN, (struct sk_buff *)1);
+ lp->tx_new = (lp->tx_new + 1) % lp->txRingSize;
+ outl(POLL_DEMAND, DE4X5_TPD); /* Start the TX */
+ netif_wake_queue(dev); /* Unlock the TX ring */
+ break;
+
+ case DE4X5_SAY_BOO: /* Say "Boo!" to the kernel log file */
+ if (!capable(CAP_NET_ADMIN)) return -EPERM;
+ printk("%s: Boo!\n", dev->name);
+ break;
+
+ case DE4X5_MCA_EN: /* Enable pass all multicast addressing */
+ if (!capable(CAP_NET_ADMIN)) return -EPERM;
+ omr = inl(DE4X5_OMR);
+ omr |= OMR_PM;
+ outl(omr, DE4X5_OMR);
+ break;
+
+ case DE4X5_GET_STATS: /* Get the driver statistics */
+ {
+ struct pkt_stats statbuf;
+ ioc->len = sizeof(statbuf);
+ spin_lock_irqsave(&lp->lock, flags);
+ memcpy(&statbuf, &lp->pktStats, ioc->len);
+ spin_unlock_irqrestore(&lp->lock, flags);
+ if (copy_to_user(ioc->data, &statbuf, ioc->len))
+ return -EFAULT;
+ break;
+ }
+ case DE4X5_CLR_STATS: /* Zero out the driver statistics */
+ if (!capable(CAP_NET_ADMIN)) return -EPERM;
+ spin_lock_irqsave(&lp->lock, flags);
+ memset(&lp->pktStats, 0, sizeof(lp->pktStats));
+ spin_unlock_irqrestore(&lp->lock, flags);
+ break;
+
+ case DE4X5_GET_OMR: /* Get the OMR Register contents */
+ tmp.addr[0] = inl(DE4X5_OMR);
+ if (copy_to_user(ioc->data, tmp.addr, 1)) return -EFAULT;
+ break;
+
+ case DE4X5_SET_OMR: /* Set the OMR Register contents */
+ if (!capable(CAP_NET_ADMIN)) return -EPERM;
+ if (copy_from_user(tmp.addr, ioc->data, 1)) return -EFAULT;
+ outl(tmp.addr[0], DE4X5_OMR);
+ break;
+
+ case DE4X5_GET_REG: /* Get the DE4X5 Registers */
+ j = 0;
+ tmp.lval[0] = inl(DE4X5_STS); j+=4;
+ tmp.lval[1] = inl(DE4X5_BMR); j+=4;
+ tmp.lval[2] = inl(DE4X5_IMR); j+=4;
+ tmp.lval[3] = inl(DE4X5_OMR); j+=4;
+ tmp.lval[4] = inl(DE4X5_SISR); j+=4;
+ tmp.lval[5] = inl(DE4X5_SICR); j+=4;
+ tmp.lval[6] = inl(DE4X5_STRR); j+=4;
+ tmp.lval[7] = inl(DE4X5_SIGR); j+=4;
+ ioc->len = j;
+ if (copy_to_user(ioc->data, tmp.lval, ioc->len))
+ return -EFAULT;
+ break;
+
+#define DE4X5_DUMP 0x0f /* Dump the DE4X5 Status */
+/*
+ case DE4X5_DUMP:
+ j = 0;
+ tmp.addr[j++] = dev->irq;
+ for (i=0; i<ETH_ALEN; i++) {
+ tmp.addr[j++] = dev->dev_addr[i];
+ }
+ tmp.addr[j++] = lp->rxRingSize;
+ tmp.lval[j>>2] = (long)lp->rx_ring; j+=4;
+ tmp.lval[j>>2] = (long)lp->tx_ring; j+=4;
+
+ for (i=0;i<lp->rxRingSize-1;i++){
+ if (i < 3) {
+ tmp.lval[j>>2] = (long)&lp->rx_ring[i].status; j+=4;
+ }
+ }
+ tmp.lval[j>>2] = (long)&lp->rx_ring[i].status; j+=4;
+ for (i=0;i<lp->txRingSize-1;i++){
+ if (i < 3) {
+ tmp.lval[j>>2] = (long)&lp->tx_ring[i].status; j+=4;
+ }
+ }
+ tmp.lval[j>>2] = (long)&lp->tx_ring[i].status; j+=4;
+
+ for (i=0;i<lp->rxRingSize-1;i++){
+ if (i < 3) {
+ tmp.lval[j>>2] = (s32)le32_to_cpu(lp->rx_ring[i].buf); j+=4;
+ }
+ }
+ tmp.lval[j>>2] = (s32)le32_to_cpu(lp->rx_ring[i].buf); j+=4;
+ for (i=0;i<lp->txRingSize-1;i++){
+ if (i < 3) {
+ tmp.lval[j>>2] = (s32)le32_to_cpu(lp->tx_ring[i].buf); j+=4;
+ }
+ }
+ tmp.lval[j>>2] = (s32)le32_to_cpu(lp->tx_ring[i].buf); j+=4;
+
+ for (i=0;i<lp->rxRingSize;i++){
+ tmp.lval[j>>2] = le32_to_cpu(lp->rx_ring[i].status); j+=4;
+ }
+ for (i=0;i<lp->txRingSize;i++){
+ tmp.lval[j>>2] = le32_to_cpu(lp->tx_ring[i].status); j+=4;
+ }
+
+ tmp.lval[j>>2] = inl(DE4X5_BMR); j+=4;
+ tmp.lval[j>>2] = inl(DE4X5_TPD); j+=4;
+ tmp.lval[j>>2] = inl(DE4X5_RPD); j+=4;
+ tmp.lval[j>>2] = inl(DE4X5_RRBA); j+=4;
+ tmp.lval[j>>2] = inl(DE4X5_TRBA); j+=4;
+ tmp.lval[j>>2] = inl(DE4X5_STS); j+=4;
+ tmp.lval[j>>2] = inl(DE4X5_OMR); j+=4;
+ tmp.lval[j>>2] = inl(DE4X5_IMR); j+=4;
+ tmp.lval[j>>2] = lp->chipset; j+=4;
+ if (lp->chipset == DC21140) {
+ tmp.lval[j>>2] = gep_rd(dev); j+=4;
+ } else {
+ tmp.lval[j>>2] = inl(DE4X5_SISR); j+=4;
+ tmp.lval[j>>2] = inl(DE4X5_SICR); j+=4;
+ tmp.lval[j>>2] = inl(DE4X5_STRR); j+=4;
+ tmp.lval[j>>2] = inl(DE4X5_SIGR); j+=4;
+ }
+ tmp.lval[j>>2] = lp->phy[lp->active].id; j+=4;
+ if (lp->phy[lp->active].id && (!lp->useSROM || lp->useMII)) {
+ tmp.lval[j>>2] = lp->active; j+=4;
+ tmp.lval[j>>2]=mii_rd(MII_CR,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
+ tmp.lval[j>>2]=mii_rd(MII_SR,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
+ tmp.lval[j>>2]=mii_rd(MII_ID0,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
+ tmp.lval[j>>2]=mii_rd(MII_ID1,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
+ if (lp->phy[lp->active].id != BROADCOM_T4) {
+ tmp.lval[j>>2]=mii_rd(MII_ANA,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
+ tmp.lval[j>>2]=mii_rd(MII_ANLPA,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
+ }
+ tmp.lval[j>>2]=mii_rd(0x10,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
+ if (lp->phy[lp->active].id != BROADCOM_T4) {
+ tmp.lval[j>>2]=mii_rd(0x11,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
+ tmp.lval[j>>2]=mii_rd(0x12,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
+ } else {
+ tmp.lval[j>>2]=mii_rd(0x14,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
+ }
+ }
+
+ tmp.addr[j++] = lp->txRingSize;
+ tmp.addr[j++] = netif_queue_stopped(dev);
+
+ ioc->len = j;
+ if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT;
+ break;
+
+*/
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return status;
+}
+
+static int __init de4x5_module_init (void)
+{
+ int err = 0;
+
+#ifdef CONFIG_PCI
+ err = pci_register_driver(&de4x5_pci_driver);
+#endif
+#ifdef CONFIG_EISA
+ err |= eisa_driver_register (&de4x5_eisa_driver);
+#endif
+
+ return err;
+}
+
+static void __exit de4x5_module_exit (void)
+{
+#ifdef CONFIG_PCI
+ pci_unregister_driver (&de4x5_pci_driver);
+#endif
+#ifdef CONFIG_EISA
+ eisa_driver_unregister (&de4x5_eisa_driver);
+#endif
+}
+
+module_init (de4x5_module_init);
+module_exit (de4x5_module_exit);