summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/cadence
diff options
context:
space:
mode:
authorJamie Iles <jamie.iles@mathembedded.com>2011-11-08 10:12:32 +0000
committerJamie Iles <jamie@jamieiles.com>2011-11-22 15:21:17 +0000
commitf75ba50bdc2bcfab591bdf903312557033d0ac68 (patch)
tree4ccc618be2fb9f998eed75549ca69b31712b0d0e /drivers/net/ethernet/cadence
parentc220f8cd01198552a616c4216f2a8e719fdb5fd9 (diff)
downloadlinux-f75ba50bdc2bcfab591bdf903312557033d0ac68.tar.bz2
macb: initial support for Cadence GEM
The Cadence GEM is based on the MACB Ethernet controller but has a few small changes with regards to register and bitfield placement. This patch detects the presence of a GEM by reading the module ID register and setting a flag appropriately. This handles the new HW address, USRIO and hash register base register locations in GEM. v3: - convert to macb_is_gem() inline rather than storing a boolean flag - handle rx_overrun stats for gem Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Diffstat (limited to 'drivers/net/ethernet/cadence')
-rw-r--r--drivers/net/ethernet/cadence/Kconfig16
-rw-r--r--drivers/net/ethernet/cadence/macb.c43
-rw-r--r--drivers/net/ethernet/cadence/macb.h61
3 files changed, 94 insertions, 26 deletions
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index 98849a1fc749..a2e150059bc7 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -5,8 +5,8 @@
config HAVE_NET_MACB
bool
-config NET_ATMEL
- bool "Atmel devices"
+config NET_CADENCE
+ bool "Cadence devices"
depends on HAVE_NET_MACB || (ARM && ARCH_AT91RM9200)
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
@@ -20,7 +20,7 @@ config NET_ATMEL
the remaining Atmel network card questions. If you say Y, you will be
asked for your specific card in the following questions.
-if NET_ATMEL
+if NET_CADENCE
config ARM_AT91_ETHER
tristate "AT91RM9200 Ethernet support"
@@ -32,14 +32,16 @@ config ARM_AT91_ETHER
ethernet support, then you should always answer Y to this.
config MACB
- tristate "Atmel MACB support"
+ tristate "Cadence MACB/GEM support"
depends on HAVE_NET_MACB
select PHYLIB
---help---
- The Atmel MACB ethernet interface is found on many AT32 and AT91
- parts. Say Y to include support for the MACB chip.
+ The Cadence MACB ethernet interface is found on many Atmel AT32 and
+ AT91 parts. This driver also supports the Cadence GEM (Gigabit
+ Ethernet MAC found in some ARM SoC devices). Note: the Gigabit mode
+ is not yet supported. Say Y to include support for the MACB/GEM chip.
To compile this driver as a module, choose M here: the module
will be called macb.
-endif # NET_ATMEL
+endif # NET_CADENCE
diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index aa1d597091a8..4e61a8610d6a 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -1,5 +1,5 @@
/*
- * Atmel MACB Ethernet Controller driver
+ * Cadence MACB/GEM Ethernet Controller driver
*
* Copyright (C) 2004-2006 Atmel Corporation
*
@@ -59,9 +59,9 @@ static void __macb_set_hwaddr(struct macb *bp)
u16 top;
bottom = cpu_to_le32(*((u32 *)bp->dev->dev_addr));
- macb_writel(bp, SA1B, bottom);
+ macb_or_gem_writel(bp, SA1B, bottom);
top = cpu_to_le16(*((u16 *)(bp->dev->dev_addr + 4)));
- macb_writel(bp, SA1T, top);
+ macb_or_gem_writel(bp, SA1T, top);
}
static void __init macb_get_hwaddr(struct macb *bp)
@@ -70,8 +70,8 @@ static void __init macb_get_hwaddr(struct macb *bp)
u16 top;
u8 addr[6];
- bottom = macb_readl(bp, SA1B);
- top = macb_readl(bp, SA1T);
+ bottom = macb_or_gem_readl(bp, SA1B);
+ top = macb_or_gem_readl(bp, SA1T);
addr[0] = bottom & 0xff;
addr[1] = (bottom >> 8) & 0xff;
@@ -580,7 +580,10 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
if (status & MACB_BIT(ISR_ROVR)) {
/* We missed at least one packet */
- bp->hw_stats.rx_overruns++;
+ if (macb_is_gem(bp))
+ bp->hw_stats.gem.rx_overruns++;
+ else
+ bp->hw_stats.macb.rx_overruns++;
}
if (status & MACB_BIT(HRESP)) {
@@ -902,8 +905,8 @@ static void macb_sethashtable(struct net_device *dev)
mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
}
- macb_writel(bp, HRB, mc_filter[0]);
- macb_writel(bp, HRT, mc_filter[1]);
+ macb_or_gem_writel(bp, HRB, mc_filter[0]);
+ macb_or_gem_writel(bp, HRT, mc_filter[1]);
}
/*
@@ -925,8 +928,8 @@ static void macb_set_rx_mode(struct net_device *dev)
if (dev->flags & IFF_ALLMULTI) {
/* Enable all multicast mode */
- macb_writel(bp, HRB, -1);
- macb_writel(bp, HRT, -1);
+ macb_or_gem_writel(bp, HRB, -1);
+ macb_or_gem_writel(bp, HRT, -1);
cfg |= MACB_BIT(NCFGR_MTI);
} else if (!netdev_mc_empty(dev)) {
/* Enable specific multicasts */
@@ -934,8 +937,8 @@ static void macb_set_rx_mode(struct net_device *dev)
cfg |= MACB_BIT(NCFGR_MTI);
} else if (dev->flags & (~IFF_ALLMULTI)) {
/* Disable all multicast mode */
- macb_writel(bp, HRB, 0);
- macb_writel(bp, HRT, 0);
+ macb_or_gem_writel(bp, HRB, 0);
+ macb_or_gem_writel(bp, HRT, 0);
cfg &= ~MACB_BIT(NCFGR_MTI);
}
@@ -1196,15 +1199,16 @@ static int __init macb_probe(struct platform_device *pdev)
if (pdata && pdata->is_rmii)
#if defined(CONFIG_ARCH_AT91)
- macb_writel(bp, USRIO, (MACB_BIT(RMII) | MACB_BIT(CLKEN)) );
+ macb_or_gem_writel(bp, USRIO, (MACB_BIT(RMII) |
+ MACB_BIT(CLKEN)));
#else
- macb_writel(bp, USRIO, 0);
+ macb_or_gem_writel(bp, USRIO, 0);
#endif
else
#if defined(CONFIG_ARCH_AT91)
- macb_writel(bp, USRIO, MACB_BIT(CLKEN));
+ macb_or_gem_writel(bp, USRIO, MACB_BIT(CLKEN));
#else
- macb_writel(bp, USRIO, MACB_BIT(MII));
+ macb_or_gem_writel(bp, USRIO, MACB_BIT(MII));
#endif
bp->tx_pending = DEF_TX_RING_PENDING;
@@ -1221,8 +1225,9 @@ static int __init macb_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dev);
- netdev_info(dev, "Atmel MACB at 0x%08lx irq %d (%pM)\n",
- dev->base_addr, dev->irq, dev->dev_addr);
+ netdev_info(dev, "Cadence %s at 0x%08lx irq %d (%pM)\n",
+ macb_is_gem(bp) ? "GEM" : "MACB", dev->base_addr,
+ dev->irq, dev->dev_addr);
phydev = bp->phy_dev;
netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
@@ -1332,6 +1337,6 @@ module_init(macb_init);
module_exit(macb_exit);
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Atmel MACB Ethernet driver");
+MODULE_DESCRIPTION("Cadence MACB/GEM Ethernet driver");
MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
MODULE_ALIAS("platform:macb");
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index d3212f6db703..d50057c244b2 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -59,6 +59,15 @@
#define MACB_TPQ 0x00bc
#define MACB_USRIO 0x00c0
#define MACB_WOL 0x00c4
+#define MACB_MID 0x00fc
+
+/* GEM register offsets. */
+#define GEM_NCFGR 0x0004
+#define GEM_USRIO 0x000c
+#define GEM_HRB 0x0080
+#define GEM_HRT 0x0084
+#define GEM_SA1B 0x0088
+#define GEM_SA1T 0x008C
/* Bitfields in NCR */
#define MACB_LB_OFFSET 0
@@ -228,6 +237,12 @@
#define MACB_WOL_MTI_OFFSET 19
#define MACB_WOL_MTI_SIZE 1
+/* Bitfields in MID */
+#define MACB_IDNUM_OFFSET 16
+#define MACB_IDNUM_SIZE 16
+#define MACB_REV_OFFSET 0
+#define MACB_REV_SIZE 16
+
/* Constants for CLK */
#define MACB_CLK_DIV8 0
#define MACB_CLK_DIV16 1
@@ -254,11 +269,52 @@
<< MACB_##name##_OFFSET)) \
| MACB_BF(name,value))
+#define GEM_BIT(name) \
+ (1 << GEM_##name##_OFFSET)
+#define GEM_BF(name, value) \
+ (((value) & ((1 << GEM_##name##_SIZE) - 1)) \
+ << GEM_##name##_OFFSET)
+#define GEM_BFEXT(name, value)\
+ (((value) >> GEM_##name##_OFFSET) \
+ & ((1 << GEM_##name##_SIZE) - 1))
+#define GEM_BFINS(name, value, old) \
+ (((old) & ~(((1 << GEM_##name##_SIZE) - 1) \
+ << GEM_##name##_OFFSET)) \
+ | GEM_BF(name, value))
+
/* Register access macros */
#define macb_readl(port,reg) \
__raw_readl((port)->regs + MACB_##reg)
#define macb_writel(port,reg,value) \
__raw_writel((value), (port)->regs + MACB_##reg)
+#define gem_readl(port, reg) \
+ __raw_readl((port)->regs + GEM_##reg)
+#define gem_writel(port, reg, value) \
+ __raw_writel((value), (port)->regs + GEM_##reg)
+
+/*
+ * Conditional GEM/MACB macros. These perform the operation to the correct
+ * register dependent on whether the device is a GEM or a MACB. For registers
+ * and bitfields that are common across both devices, use macb_{read,write}l
+ * to avoid the cost of the conditional.
+ */
+#define macb_or_gem_writel(__bp, __reg, __value) \
+ ({ \
+ if (macb_is_gem((__bp))) \
+ gem_writel((__bp), __reg, __value); \
+ else \
+ macb_writel((__bp), __reg, __value); \
+ })
+
+#define macb_or_gem_readl(__bp, __reg) \
+ ({ \
+ u32 __v; \
+ if (macb_is_gem((__bp))) \
+ __v = gem_readl((__bp), __reg); \
+ else \
+ __v = macb_readl((__bp), __reg); \
+ __v; \
+ })
struct dma_desc {
u32 addr;
@@ -391,4 +447,9 @@ struct macb {
unsigned int duplex;
};
+static inline bool macb_is_gem(struct macb *bp)
+{
+ return MACB_BFEXT(IDNUM, macb_readl(bp, MID)) == 0x2;
+}
+
#endif /* _MACB_H */