Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:

 - Add redirect_neigh() BPF packet redirect helper, allowing to limit
   stack traversal in common container configs and improving TCP
   back-pressure.

   Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.

 - Expand netlink policy support and improve policy export to user
   space. (Ge)netlink core performs request validation according to
   declared policies. Expand the expressiveness of those policies
   (min/max length and bitmasks). Allow dumping policies for particular
   commands. This is used for feature discovery by user space (instead
   of kernel version parsing or trial and error).

 - Support IGMPv3/MLDv2 multicast listener discovery protocols in
   bridge.

 - Allow more than 255 IPv4 multicast interfaces.

 - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
   packets of TCPv6.

 - In Multi-patch TCP (MPTCP) support concurrent transmission of data on
   multiple subflows in a load balancing scenario. Enhance advertising
   addresses via the RM_ADDR/ADD_ADDR options.

 - Support SMC-Dv2 version of SMC, which enables multi-subnet
   deployments.

 - Allow more calls to same peer in RxRPC.

 - Support two new Controller Area Network (CAN) protocols - CAN-FD and
   ISO 15765-2:2016.

 - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
   kernel problem.

 - Add TC actions for implementing MPLS L2 VPNs.

 - Improve nexthop code - e.g. handle various corner cases when nexthop
   objects are removed from groups better, skip unnecessary
   notifications and make it easier to offload nexthops into HW by
   converting to a blocking notifier.

 - Support adding and consuming TCP header options by BPF programs,
   opening the doors for easy experimental and deployment-specific TCP
   option use.

 - Reorganize TCP congestion control (CC) initialization to simplify
   life of TCP CC implemented in BPF.

 - Add support for shipping BPF programs with the kernel and loading
   them early on boot via the User Mode Driver mechanism, hence reusing
   all the user space infra we have.

 - Support sleepable BPF programs, initially targeting LSM and tracing.

 - Add bpf_d_path() helper for returning full path for given 'struct
   path'.

 - Make bpf_tail_call compatible with bpf-to-bpf calls.

 - Allow BPF programs to call map_update_elem on sockmaps.

 - Add BPF Type Format (BTF) support for type and enum discovery, as
   well as support for using BTF within the kernel itself (current use
   is for pretty printing structures).

 - Support listing and getting information about bpf_links via the bpf
   syscall.

 - Enhance kernel interfaces around NIC firmware update. Allow
   specifying overwrite mask to control if settings etc. are reset
   during update; report expected max time operation may take to users;
   support firmware activation without machine reboot incl. limits of
   how much impact reset may have (e.g. dropping link or not).

 - Extend ethtool configuration interface to report IEEE-standard
   counters, to limit the need for per-vendor logic in user space.

 - Adopt or extend devlink use for debug, monitoring, fw update in many
   drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
   dpaa2-eth).

 - In mlxsw expose critical and emergency SFP module temperature alarms.
   Refactor port buffer handling to make the defaults more suitable and
   support setting these values explicitly via the DCBNL interface.

 - Add XDP support for Intel's igb driver.

 - Support offloading TC flower classification and filtering rules to
   mscc_ocelot switches.

 - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
   fixed interval period pulse generator and one-step timestamping in
   dpaa-eth.

 - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
   offload.

 - Add Lynx PHY/PCS MDIO module, and convert various drivers which have
   this HW to use it. Convert mvpp2 to split PCS.

 - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
   7-port Mediatek MT7531 IP.

 - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
   and wcn3680 support in wcn36xx.

 - Improve performance for packets which don't require much offloads on
   recent Mellanox NICs by 20% by making multiple packets share a
   descriptor entry.

 - Move chelsio inline crypto drivers (for TLS and IPsec) from the
   crypto subtree to drivers/net. Move MDIO drivers out of the phy
   directory.

 - Clean up a lot of W=1 warnings, reportedly the actively developed
   subsections of networking drivers should now build W=1 warning free.

 - Make sure drivers don't use in_interrupt() to dynamically adapt their
   code. Convert tasklets to use new tasklet_setup API (sadly this
   conversion is not yet complete).

* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
  Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
  net, sockmap: Don't call bpf_prog_put() on NULL pointer
  bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
  bpf, sockmap: Add locking annotations to iterator
  netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
  net: fix pos incrementment in ipv6_route_seq_next
  net/smc: fix invalid return code in smcd_new_buf_create()
  net/smc: fix valid DMBE buffer sizes
  net/smc: fix use-after-free of delayed events
  bpfilter: Fix build error with CONFIG_BPFILTER_UMH
  cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
  net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
  bpf: Fix register equivalence tracking.
  rxrpc: Fix loss of final ack on shutdown
  rxrpc: Fix bundle counting for exclusive connections
  netfilter: restore NF_INET_NUMHOOKS
  ibmveth: Identify ingress large send packets.
  ibmveth: Switch order of ibmveth_helper calls.
  cxgb4: handle 4-tuple PEDIT to NAT mode translation
  selftests: Add VRF route leaking tests
  ...

1 files changed, 52 insertions, 72 deletions

diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index 01427cd08448..f791860d495f 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -19,6 +19,7 @@
 #include <linux/of_net.h>
 #include <linux/pci.h>
 #include <linux/of.h>
+#include <linux/pcs-lynx.h>
 #include <net/pkt_sched.h>
 #include <net/dsa.h>
 #include "felix.h"
@@ -118,13 +119,12 @@ static int felix_vlan_prepare(struct dsa_switch *ds, int port,
 	return 0;
 }
 
-static int felix_vlan_filtering(struct dsa_switch *ds, int port, bool enabled)
+static int felix_vlan_filtering(struct dsa_switch *ds, int port, bool enabled,
+				struct switchdev_trans *trans)
 {
 	struct ocelot *ocelot = ds->priv;
 
-	ocelot_port_vlan_filtering(ocelot, port, enabled);
-
-	return 0;
+	return ocelot_port_vlan_filtering(ocelot, port, enabled, trans);
 }
 
 static void felix_vlan_add(struct dsa_switch *ds, int port,
@@ -196,27 +196,16 @@ static void felix_phylink_validate(struct dsa_switch *ds, int port,
 		felix->info->phylink_validate(ocelot, port, supported, state);
 }
 
-static int felix_phylink_mac_pcs_get_state(struct dsa_switch *ds, int port,
-					   struct phylink_link_state *state)
-{
-	struct ocelot *ocelot = ds->priv;
-	struct felix *felix = ocelot_to_felix(ocelot);
-
-	if (felix->info->pcs_link_state)
-		felix->info->pcs_link_state(ocelot, port, state);
-
-	return 0;
-}
-
 static void felix_phylink_mac_config(struct dsa_switch *ds, int port,
 				     unsigned int link_an_mode,
 				     const struct phylink_link_state *state)
 {
 	struct ocelot *ocelot = ds->priv;
 	struct felix *felix = ocelot_to_felix(ocelot);
+	struct dsa_port *dp = dsa_to_port(ds, port);
 
-	if (felix->info->pcs_config)
-		felix->info->pcs_config(ocelot, port, link_an_mode, state);
+	if (felix->pcs[port])
+		phylink_set_pcs(dp->pl, &felix->pcs[port]->pcs);
 }
 
 static void felix_phylink_mac_link_down(struct dsa_switch *ds, int port,
@@ -306,10 +295,6 @@ static void felix_phylink_mac_link_up(struct dsa_switch *ds, int port,
 	ocelot_fields_write(ocelot, port,
 			    QSYS_SWITCH_PORT_MODE_PORT_ENA, 1);
 
-	if (felix->info->pcs_link_up)
-		felix->info->pcs_link_up(ocelot, port, link_an_mode, interface,
-					 speed, duplex);
-
 	if (felix->info->port_sched_speed_set)
 		felix->info->port_sched_speed_set(ocelot, port, speed);
 }
@@ -449,10 +434,10 @@ static int felix_init_structs(struct felix *felix, int num_phys_ports)
 	ocelot->num_stats	= felix->info->num_stats;
 	ocelot->shared_queue_sz	= felix->info->shared_queue_sz;
 	ocelot->num_mact_rows	= felix->info->num_mact_rows;
-	ocelot->vcap_is2_keys	= felix->info->vcap_is2_keys;
-	ocelot->vcap_is2_actions= felix->info->vcap_is2_actions;
 	ocelot->vcap		= felix->info->vcap;
 	ocelot->ops		= felix->info->ops;
+	ocelot->inj_prefix	= OCELOT_TAG_PREFIX_SHORT;
+	ocelot->xtr_prefix	= OCELOT_TAG_PREFIX_SHORT;
 
 	port_phy_modes = kcalloc(num_phys_ports, sizeof(phy_interface_t),
 				 GFP_KERNEL);
@@ -523,7 +508,7 @@ static int felix_init_structs(struct felix *felix, int num_phys_ports)
 			return PTR_ERR(target);
 		}
 
-		template = devm_kzalloc(ocelot->dev, OCELOT_TAG_LEN,
+		template = devm_kzalloc(ocelot->dev, OCELOT_TOTAL_TAG_LEN,
 					GFP_KERNEL);
 		if (!template) {
 			dev_err(ocelot->dev,
@@ -552,22 +537,27 @@ static int felix_init_structs(struct felix *felix, int num_phys_ports)
 	return 0;
 }
 
-static struct ptp_clock_info ocelot_ptp_clock_info = {
-	.owner		= THIS_MODULE,
-	.name		= "felix ptp",
-	.max_adj	= 0x7fffffff,
-	.n_alarm	= 0,
-	.n_ext_ts	= 0,
-	.n_per_out	= OCELOT_PTP_PINS_NUM,
-	.n_pins		= OCELOT_PTP_PINS_NUM,
-	.pps		= 0,
-	.gettime64	= ocelot_ptp_gettime64,
-	.settime64	= ocelot_ptp_settime64,
-	.adjtime	= ocelot_ptp_adjtime,
-	.adjfine	= ocelot_ptp_adjfine,
-	.verify		= ocelot_ptp_verify,
-	.enable		= ocelot_ptp_enable,
-};
+/* The CPU port module is connected to the Node Processor Interface (NPI). This
+ * is the mode through which frames can be injected from and extracted to an
+ * external CPU, over Ethernet.
+ */
+static void felix_npi_port_init(struct ocelot *ocelot, int port)
+{
+	ocelot->npi = port;
+
+	ocelot_write(ocelot, QSYS_EXT_CPU_CFG_EXT_CPUQ_MSK_M |
+		     QSYS_EXT_CPU_CFG_EXT_CPU_PORT(port),
+		     QSYS_EXT_CPU_CFG);
+
+	/* NPI port Injection/Extraction configuration */
+	ocelot_fields_write(ocelot, port, SYS_PORT_MODE_INCL_XTR_HDR,
+			    ocelot->xtr_prefix);
+	ocelot_fields_write(ocelot, port, SYS_PORT_MODE_INCL_INJ_HDR,
+			    ocelot->inj_prefix);
+
+	/* Disable transmission of pause frames */
+	ocelot_fields_write(ocelot, port, SYS_PAUSE_CFG_PAUSE_ENA, 0);
+}
 
 /* Hardware initialization done here so that we can allocate structures with
  * devm without fear of dsa_register_switch returning -EPROBE_DEFER and causing
@@ -590,7 +580,7 @@ static int felix_setup(struct dsa_switch *ds)
 		return err;
 
 	if (ocelot->ptp) {
-		err = ocelot_init_timestamp(ocelot, &ocelot_ptp_clock_info);
+		err = ocelot_init_timestamp(ocelot, felix->info->ptp_caps);
 		if (err) {
 			dev_err(ocelot->dev,
 				"Timestamp initialization failed\n");
@@ -601,11 +591,8 @@ static int felix_setup(struct dsa_switch *ds)
 	for (port = 0; port < ds->num_ports; port++) {
 		ocelot_init_port(ocelot, port);
 
-		/* Bring up the CPU port module and configure the NPI port */
 		if (dsa_is_cpu_port(ds, port))
-			ocelot_configure_cpu(ocelot, port,
-					     OCELOT_TAG_PREFIX_NONE,
-					     OCELOT_TAG_PREFIX_LONG);
+			felix_npi_port_init(ocelot, port);
 
 		/* Set the default QoS Classification based on PCP and DEI
 		 * bits of vlan tag.
@@ -630,11 +617,6 @@ static int felix_setup(struct dsa_switch *ds)
 
 	ds->mtu_enforcement_ingress = true;
 	ds->configure_vlan_while_not_filtering = true;
-	/* It looks like the MAC/PCS interrupt register - PM0_IEVENT (0x8040)
-	 * isn't instantiated for the Felix PF.
-	 * In-band AN may take a few ms to complete, so we need to poll.
-	 */
-	ds->pcs_poll = true;
 
 	return 0;
 }
@@ -705,8 +687,11 @@ static bool felix_txtstamp(struct dsa_switch *ds, int port,
 	struct ocelot *ocelot = ds->priv;
 	struct ocelot_port *ocelot_port = ocelot->ports[port];
 
-	if (!ocelot_port_add_txtstamp_skb(ocelot_port, clone))
+	if (ocelot->ptp && (skb_shinfo(clone)->tx_flags & SKBTX_HW_TSTAMP) &&
+	    ocelot_port->ptp_cmd == IFH_REW_OP_TWO_STEP_PTP) {
+		ocelot_port_add_txtstamp_skb(ocelot, port, clone);
 		return true;
+	}
 
 	return false;
 }
@@ -793,7 +778,6 @@ const struct dsa_switch_ops felix_switch_ops = {
 	.get_sset_count		= felix_get_sset_count,
 	.get_ts_info		= felix_get_ts_info,
 	.phylink_validate	= felix_phylink_validate,
-	.phylink_mac_link_state	= felix_phylink_mac_pcs_get_state,
 	.phylink_mac_config	= felix_phylink_mac_config,
 	.phylink_mac_link_down	= felix_phylink_mac_link_down,
 	.phylink_mac_link_up	= felix_phylink_mac_link_up,
@@ -823,31 +807,27 @@ const struct dsa_switch_ops felix_switch_ops = {
 	.cls_flower_add		= felix_cls_flower_add,
 	.cls_flower_del		= felix_cls_flower_del,
 	.cls_flower_stats	= felix_cls_flower_stats,
-	.port_setup_tc          = felix_port_setup_tc,
+	.port_setup_tc		= felix_port_setup_tc,
 };
 
-static int __init felix_init(void)
+struct net_device *felix_port_to_netdev(struct ocelot *ocelot, int port)
 {
-	int err;
-
-	err = pci_register_driver(&felix_vsc9959_pci_driver);
-	if (err)
-		return err;
+	struct felix *felix = ocelot_to_felix(ocelot);
+	struct dsa_switch *ds = felix->ds;
 
-	err = platform_driver_register(&seville_vsc9953_driver);
-	if (err)
-		return err;
+	if (!dsa_is_user_port(ds, port))
+		return NULL;
 
-	return 0;
+	return dsa_to_port(ds, port)->slave;
 }
-module_init(felix_init);
 
-static void __exit felix_exit(void)
+int felix_netdev_to_port(struct net_device *dev)
 {
-	pci_unregister_driver(&felix_vsc9959_pci_driver);
-	platform_driver_unregister(&seville_vsc9953_driver);
-}
-module_exit(felix_exit);
+	struct dsa_port *dp;
+
+	dp = dsa_port_from_netdev(dev);
+	if (IS_ERR(dp))
+		return -EINVAL;
 
-MODULE_DESCRIPTION("Felix Switch driver");
-MODULE_LICENSE("GPL v2");
+	return dp->index;
+}