Merge tag 'net-6.1-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, can and netfilter.

  Current release - new code bugs:

   - bonding: ipv6: correct address used in Neighbour Advertisement
     parsing (src vs dst typo)

   - fec: properly scope IRQ coalesce setup during link up to supported
     chips only

  Previous releases - regressions:

   - Bluetooth fixes for fake CSR clones (knockoffs):
       - re-add ERR_DATA_REPORTING quirk
       - fix crash when device is replugged

   - Bluetooth:
       - silence a user-triggerable dmesg error message
       - L2CAP: fix u8 overflow, oob access
       - correct vendor codec definition
       - fix support for Read Local Supported Codecs V2

   - ti: am65-cpsw: fix RGMII configuration at SPEED_10

   - mana: fix race on per-CQ variable NAPI work_done

  Previous releases - always broken:

   - af_unix: diag: fetch user_ns from in_skb in unix_diag_get_exact(),
     avoid null-deref

   - af_can: fix NULL pointer dereference in can_rcv_filter

   - can: slcan: fix UAF with a freed work

   - can: can327: flush TX_work on ldisc .close()

   - macsec: add missing attribute validation for offload

   - ipv6: avoid use-after-free in ip6_fragment()

   - nft_set_pipapo: actually validate intervals in fields after the
     first one

   - mvneta: prevent oob access in mvneta_config_rss()

   - ipv4: fix incorrect route flushing when table ID 0 is used, or when
     source address is deleted

   - phy: mxl-gpy: add workaround for IRQ bug on GPY215B and GPY215C"

* tag 'net-6.1-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
  net: dsa: sja1105: avoid out of bounds access in sja1105_init_l2_policing()
  s390/qeth: fix use-after-free in hsci
  macsec: add missing attribute validation for offload
  net: mvneta: Fix an out of bounds check
  net: thunderbolt: fix memory leak in tbnet_open()
  ipv6: avoid use-after-free in ip6_fragment()
  net: plip: don't call kfree_skb/dev_kfree_skb() under spin_lock_irq()
  net: phy: mxl-gpy: add MDINT workaround
  net: dsa: mv88e6xxx: accept phy-mode = "internal" for internal PHY ports
  xen/netback: don't call kfree_skb() under spin_lock_irqsave()
  dpaa2-switch: Fix memory leak in dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove()
  ethernet: aeroflex: fix potential skb leak in greth_init_rings()
  tipc: call tipc_lxc_xmit without holding node_read_lock
  can: esd_usb: Allow REC and TEC to return to zero
  can: can327: flush TX_work on ldisc .close()
  can: slcan: fix freed work crash
  can: af_can: fix NULL pointer dereference in can_rcv_filter
  net: dsa: sja1105: fix memory leak in sja1105_setup_devlink_regions()
  ipv4: Fix incorrect route flushing when table ID 0 is used
  ipv4: Fix incorrect route flushing when source address is deleted
  ...

3 files changed, 22 insertions, 11 deletions

diff --git a/drivers/net/can/can327.c b/drivers/net/can/can327.c
index ed3d0b8989a0..dc7192ecb001 100644
--- a/drivers/net/can/can327.c
+++ b/drivers/net/can/can327.c
@@ -796,9 +796,9 @@ static int can327_netdev_close(struct net_device *dev)
 
 	netif_stop_queue(dev);
 
-	/* Give UART one final chance to flush. */
-	clear_bit(TTY_DO_WRITE_WAKEUP, &elm->tty->flags);
-	flush_work(&elm->tx_work);
+	/* We don't flush the UART TX queue here, as we want final stop
+	 * commands (like the above dummy char) to be flushed out.
+	 */
 
 	can_rx_offload_disable(&elm->offload);
 	elm->can.state = CAN_STATE_STOPPED;
@@ -1069,12 +1069,15 @@ static void can327_ldisc_close(struct tty_struct *tty)
 {
 	struct can327 *elm = (struct can327 *)tty->disc_data;
 
-	/* unregister_netdev() calls .ndo_stop() so we don't have to.
-	 * Our .ndo_stop() also flushes the TTY write wakeup handler,
-	 * so we can safely set elm->tty = NULL after this.
-	 */
+	/* unregister_netdev() calls .ndo_stop() so we don't have to. */
 	unregister_candev(elm->dev);
 
+	/* Give UART one final chance to flush.
+	 * No need to clear TTY_DO_WRITE_WAKEUP since .write_wakeup() is
+	 * serialised against .close() and will not be called once we return.
+	 */
+	flush_work(&elm->tx_work);
+
 	/* Mark channel as dead */
 	spin_lock_bh(&elm->lock);
 	tty->disc_data = NULL;
diff --git a/drivers/net/can/slcan/slcan-core.c b/drivers/net/can/slcan/slcan-core.c
index fbb34139daa1..f4db77007c13 100644
--- a/drivers/net/can/slcan/slcan-core.c
+++ b/drivers/net/can/slcan/slcan-core.c
@@ -864,12 +864,14 @@ static void slcan_close(struct tty_struct *tty)
 {
 	struct slcan *sl = (struct slcan *)tty->disc_data;
 
-	/* unregister_netdev() calls .ndo_stop() so we don't have to.
-	 * Our .ndo_stop() also flushes the TTY write wakeup handler,
-	 * so we can safely set sl->tty = NULL after this.
-	 */
 	unregister_candev(sl->dev);
 
+	/*
+	 * The netdev needn't be UP (so .ndo_stop() is not called). Hence make
+	 * sure this is not running before freeing it up.
+	 */
+	flush_work(&sl->tx_work);
+
 	/* Mark channel as dead */
 	spin_lock_bh(&sl->lock);
 	tty->disc_data = NULL;
diff --git a/drivers/net/can/usb/esd_usb.c b/drivers/net/can/usb/esd_usb.c
index 81b88e9e5bdc..42323f5e6f3a 100644
--- a/drivers/net/can/usb/esd_usb.c
+++ b/drivers/net/can/usb/esd_usb.c
@@ -234,6 +234,10 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
 		u8 rxerr = msg->msg.rx.data[2];
 		u8 txerr = msg->msg.rx.data[3];
 
+		netdev_dbg(priv->netdev,
+			   "CAN_ERR_EV_EXT: dlc=%#02x state=%02x ecc=%02x rec=%02x tec=%02x\n",
+			   msg->msg.rx.dlc, state, ecc, rxerr, txerr);
+
 		skb = alloc_can_err_skb(priv->netdev, &cf);
 		if (skb == NULL) {
 			stats->rx_dropped++;
@@ -260,6 +264,8 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
 				break;
 			default:
 				priv->can.state = CAN_STATE_ERROR_ACTIVE;
+				txerr = 0;
+				rxerr = 0;
 				break;
 			}
 		} else {