Merge tag 'linux-can-next-for-5.10-20201007' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
linux-can-next-for-5.10-20201007

The first 3 patches are by me and fix several warnings found
when compiling the  kernel with W=1.

Lukas Bulwahn's patch adjusts the MAINTAINERS file, to accommodate
the renaming of the mcp251xfd driver.

Vincent Mailhol contributes 3 patches for the CAN networking layer.
First error queue support is added the the CAN RAW protocol.
The second patch converts the get_can_dlc() and get_canfd_dlc()
in-Kernel-only macros from using __u8 to u8.
The third patch adds a helper function to calculate the length of
one bit in in multiple of time quanta.

Oliver Hartkopp's patch add support for the ISO 15765-2:2016
transport protocol to the CAN stack.

Three patches by Lad Prabhakar add documentation for various
new rcar controllers to the device tree bindings of the rcar_can
and rcan_canfd driver.

Michael Walle's patch adds various processors to the flexcan
driver binding documentation.

The next two patches are by me and target the flexcan driver aswell.
The remove the ack_grp and ack_bit from the fsl,stop-mode DT property
and the driver, as they are not used anymore. As these are the last
two arguments this change will not break existing device trees.

The last three patches are by Srinivas Neeli and target
the xilinx_can driver.
The first one increases the lower limit for the bit rate
prescaler to 2, the other two fix sparse and coverity findings.
====================

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 9 insertions, 5 deletions

diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 7ae268468d2c..6c4d00d2dbdc 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -259,7 +259,7 @@ static const struct can_bittiming_const xcan_bittiming_const_canfd2 = {
 	.tseg2_min = 1,
 	.tseg2_max = 128,
 	.sjw_max = 128,
-	.brp_min = 1,
+	.brp_min = 2,
 	.brp_max = 256,
 	.brp_inc = 1,
 };
@@ -272,7 +272,7 @@ static struct can_bittiming_const xcan_data_bittiming_const_canfd2 = {
 	.tseg2_min = 1,
 	.tseg2_max = 16,
 	.sjw_max = 16,
-	.brp_min = 1,
+	.brp_min = 2,
 	.brp_max = 256,
 	.brp_inc = 1,
 };
@@ -1369,9 +1369,13 @@ static irqreturn_t xcan_interrupt(int irq, void *dev_id)
 static void xcan_chip_stop(struct net_device *ndev)
 {
 	struct xcan_priv *priv = netdev_priv(ndev);
+	int ret;
 
 	/* Disable interrupts and leave the can in configuration mode */
-	set_reset_mode(ndev);
+	ret = set_reset_mode(ndev);
+	if (ret < 0)
+		netdev_dbg(ndev, "set_reset_mode() Failed\n");
+
 	priv->can.state = CAN_STATE_STOPPED;
 }
 
@@ -1667,7 +1671,7 @@ static int xcan_probe(struct platform_device *pdev)
 	void __iomem *addr;
 	int ret;
 	int rx_max, tx_max;
-	int hw_tx_max, hw_rx_max;
+	u32 hw_tx_max = 0, hw_rx_max = 0;
 	const char *hw_tx_max_property;
 
 	/* Get the virtual base address for the device */
@@ -1720,7 +1724,7 @@ static int xcan_probe(struct platform_device *pdev)
 	 */
 	if (!(devtype->flags & XCAN_FLAG_TX_MAILBOXES) &&
 	    (devtype->flags & XCAN_FLAG_TXFEMP))
-		tx_max = min(hw_tx_max, 2);
+		tx_max = min(hw_tx_max, 2U);
 	else
 		tx_max = 1;