summaryrefslogtreecommitdiffstats
path: root/drivers/net/Kconfig
diff options
context:
space:
mode:
authorJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-06-11 02:29:36 -0700
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-08-12 00:22:12 -0700
commitec21e2ec367697b4803e82662bdff6c8567745fc (patch)
treecdb42f597ff5e60516bdab59d306006fd1fafd1c /drivers/net/Kconfig
parent5346ebf6db077d963e9d81af9df290d7f5532492 (diff)
downloadlinux-ec21e2ec367697b4803e82662bdff6c8567745fc.tar.bz2
freescale: Move the Freescale drivers
Move the Freescale drivers into drivers/net/ethernet/freescale/ and make the necessary Kconfig and Makefile changes. CC: Sandeep Gopalpet <sandeep.kumar@freescale.com> CC: Andy Fleming <afleming@freescale.com> CC: Shlomi Gridish <gridish@freescale.com> CC: Li Yang <leoli@freescale.com> CC: Pantelis Antoniou <pantelis.antoniou@gmail.com> CC: Vitaly Bordug <vbordug@ru.mvista.com> CC: Dan Malek <dmalek@jlc.net> CC: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/Kconfig')
-rw-r--r--drivers/net/Kconfig66
1 files changed, 0 insertions, 66 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 27f97b4e83b1..b645a73fd212 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -605,39 +605,6 @@ config NET_POCKET
the questions about this class of network devices. If you say Y, you
will be asked for your specific device in the following questions.
-config FEC
- bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
- depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
- IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC
- default IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC if ARM
- select PHYLIB
- help
- Say Y here if you want to use the built-in 10/100 Fast ethernet
- controller on some Motorola ColdFire and Freescale i.MX processors.
-
-config FEC_MPC52xx
- tristate "MPC52xx FEC driver"
- depends on PPC_MPC52xx && PPC_BESTCOMM
- select CRC32
- select PHYLIB
- select PPC_BESTCOMM_FEC
- ---help---
- This option enables support for the MPC5200's on-chip
- Fast Ethernet Controller
- If compiled as module, it will be called fec_mpc52xx.
-
-config FEC_MPC52xx_MDIO
- bool "MPC52xx FEC MDIO bus driver"
- depends on FEC_MPC52xx
- default y
- ---help---
- The MPC5200's FEC can connect to the Ethernet either with
- an external MII PHY chip or 10 Mbps 7-wire interface
- (Motorola? industry standard).
- If your board uses an external PHY connected to FEC, enable this.
- If not sure, enable.
- If compiled as module, it will be called fec_mpc52xx_phy.
-
config XILINX_EMACLITE
tristate "Xilinx 10/100 Ethernet Lite support"
depends on PPC32 || MICROBLAZE
@@ -651,9 +618,6 @@ config LANTIQ_ETOP
help
Support for the MII0 inside the Lantiq SoC
-
-source "drivers/net/fs_enet/Kconfig"
-
source "drivers/net/octeon/Kconfig"
endif # NET_ETHERNET
@@ -769,36 +733,6 @@ config GELIC_WIRELESS
the driver automatically distinguishes the models, you can
safely enable this option even if you have a wireless-less model.
-config FSL_PQ_MDIO
- tristate "Freescale PQ MDIO"
- depends on FSL_SOC
- select PHYLIB
- help
- This driver supports the MDIO bus used by the gianfar and UCC drivers.
-
-config GIANFAR
- tristate "Gianfar Ethernet"
- depends on FSL_SOC
- select FSL_PQ_MDIO
- select PHYLIB
- select CRC32
- help
- This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
- and MPC86xx family of chips, and the FEC on the 8540.
-
-config UCC_GETH
- tristate "Freescale QE Gigabit Ethernet"
- depends on QUICC_ENGINE
- select FSL_PQ_MDIO
- select PHYLIB
- help
- This driver supports the Gigabit Ethernet mode of the QUICC Engine,
- which is available on some Freescale SOCs.
-
-config UGETH_TX_ON_DEMAND
- bool "Transmit on Demand support"
- depends on UCC_GETH
-
config XILINX_LL_TEMAC
tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
depends on PPC || MICROBLAZE