diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2015-02-18 08:01:44 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2015-02-18 08:01:44 -0800 |
commit | 402521b8f7cc1f4f442418cc98ec6e37388207b0 (patch) | |
tree | a2cb155ff909fc8e26e3e5ebd484577697f30d79 /drivers/mtd | |
parent | f5af19d10d151c5a2afae3306578f485c244db25 (diff) | |
parent | eb928d40a93f73dd5bdad62c2d363df296ff94ea (diff) | |
download | linux-402521b8f7cc1f4f442418cc98ec6e37388207b0.tar.bz2 |
Merge tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris:
"NAND:
- Add new Hisilicon NAND driver for Hip04
- Add default reboot handler, to ensure all outstanding erase
transactions complete in time
- jz4740: convert to use GPIO descriptor API
- Atmel: add support for sama5d4
- Change default bitflip threshold to 75% of correction strength
- Miscellaneous cleanups and bugfixes
SPI NOR:
- Freescale QuadSPI:
- Fix a few probe() and remove() issues
- Add a MAINTAINERS entry for this driver
- Tweak transfer size to increase read performance
- Add suspend/resume support
- Add Micron quad I/O support
- ST FSM SPI: miscellaneous fixes
JFFS2:
- gracefully handle corrupted 'offset' field found on flash
Other:
- bcm47xxpart: add tweaks for a few new devices
- mtdconcat: set return lengths properly for mtd_write_oob()
- map_ram: enable use with mtdoops
- maps: support fallback to ROM/UBI for write-protected NOR flash"
* tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd: (46 commits)
mtd: hisilicon: && vs & typo
jffs2: fix handling of corrupted summary length
mtd: hisilicon: add device tree binding documentation
mtd: hisilicon: add a new NAND controller driver for hisilicon hip04 Soc
mtd: avoid registering reboot notifier twice
mtd: concat: set the return lengths properly
mtd: kconfig: replace PPC_OF with PPC
mtd: denali: remove unnecessary stubs
mtd: nand: remove redundant local variable
MAINTAINERS: add maintainer entry for FREESCALE QUAD SPI driver
mtd: fsl-quadspi: improve read performance by increase AHB transfer size
mtd: fsl-quadspi: Remove unnecessary 'map_failed' label
mtd: fsl-quadspi: Remove unneeded success/error messages
mtd: fsl-quadspi: Fix the error paths
mtd: nand: omap: drop condition with no effect
mtd: nand: jz4740: Convert to GPIO descriptor API
mtd: nand: Request strength instead of bytes for soft BCH
mtd: nand: default bitflip-reporting threshold to 75% of correction strength
mtd: atmel_nand: introduce a new compatible string for sama5d4 chip
mtd: atmel_nand: return max bitflips in all sectors in pmecc_correction()
...
Diffstat (limited to 'drivers/mtd')
-rw-r--r-- | drivers/mtd/bcm47xxpart.c | 43 | ||||
-rw-r--r-- | drivers/mtd/chips/map_ram.c | 1 | ||||
-rw-r--r-- | drivers/mtd/chips/map_rom.c | 13 | ||||
-rw-r--r-- | drivers/mtd/devices/st_spi_fsm.c | 137 | ||||
-rw-r--r-- | drivers/mtd/maps/physmap_of.c | 10 | ||||
-rw-r--r-- | drivers/mtd/mtdblock.c | 10 | ||||
-rw-r--r-- | drivers/mtd/mtdconcat.c | 3 | ||||
-rw-r--r-- | drivers/mtd/mtdcore.c | 28 | ||||
-rw-r--r-- | drivers/mtd/nand/Kconfig | 7 | ||||
-rw-r--r-- | drivers/mtd/nand/Makefile | 1 | ||||
-rw-r--r-- | drivers/mtd/nand/ams-delta.c | 6 | ||||
-rw-r--r-- | drivers/mtd/nand/atmel_nand.c | 31 | ||||
-rw-r--r-- | drivers/mtd/nand/denali.c | 40 | ||||
-rw-r--r-- | drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 9 | ||||
-rw-r--r-- | drivers/mtd/nand/hisi504_nand.c | 891 | ||||
-rw-r--r-- | drivers/mtd/nand/jz4740_nand.c | 29 | ||||
-rw-r--r-- | drivers/mtd/nand/nand_base.c | 31 | ||||
-rw-r--r-- | drivers/mtd/nand/nandsim.c | 7 | ||||
-rw-r--r-- | drivers/mtd/nand/omap2.c | 31 | ||||
-rw-r--r-- | drivers/mtd/nand/sunxi_nand.c | 2 | ||||
-rw-r--r-- | drivers/mtd/nftlmount.c | 18 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/fsl-quadspi.c | 93 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/spi-nor.c | 63 |
23 files changed, 1301 insertions, 203 deletions
diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c index cc13ea5ce4d5..c0720c1ee4c9 100644 --- a/drivers/mtd/bcm47xxpart.c +++ b/drivers/mtd/bcm47xxpart.c @@ -15,6 +15,8 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <uapi/linux/magic.h> + /* * NAND flash on Netgear R6250 was verified to contain 15 partitions. * This will result in allocating too big array for some old devices, but the @@ -39,7 +41,8 @@ #define ML_MAGIC1 0x39685a42 #define ML_MAGIC2 0x26594131 #define TRX_MAGIC 0x30524448 -#define SQSH_MAGIC 0x71736873 /* shsq */ +#define SHSQ_MAGIC 0x71736873 /* shsq (weird ZTE H218N endianness) */ +#define UBI_EC_MAGIC 0x23494255 /* UBI# */ struct trx_header { uint32_t magic; @@ -50,7 +53,7 @@ struct trx_header { uint32_t offset[3]; } __packed; -static void bcm47xxpart_add_part(struct mtd_partition *part, char *name, +static void bcm47xxpart_add_part(struct mtd_partition *part, const char *name, u64 offset, uint32_t mask_flags) { part->name = name; @@ -58,6 +61,26 @@ static void bcm47xxpart_add_part(struct mtd_partition *part, char *name, part->mask_flags = mask_flags; } +static const char *bcm47xxpart_trx_data_part_name(struct mtd_info *master, + size_t offset) +{ + uint32_t buf; + size_t bytes_read; + + if (mtd_read(master, offset, sizeof(buf), &bytes_read, + (uint8_t *)&buf) < 0) { + pr_err("mtd_read error while parsing (offset: 0x%X)!\n", + offset); + goto out_default; + } + + if (buf == UBI_EC_MAGIC) + return "ubi"; + +out_default: + return "rootfs"; +} + static int bcm47xxpart_parse(struct mtd_info *master, struct mtd_partition **pparts, struct mtd_part_parser_data *data) @@ -73,8 +96,12 @@ static int bcm47xxpart_parse(struct mtd_info *master, int last_trx_part = -1; int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, }; - if (blocksize <= 0x10000) - blocksize = 0x10000; + /* + * Some really old flashes (like AT45DB*) had smaller erasesize-s, but + * partitions were aligned to at least 0x1000 anyway. + */ + if (blocksize < 0x1000) + blocksize = 0x1000; /* Alloc */ parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS, @@ -186,8 +213,11 @@ static int bcm47xxpart_parse(struct mtd_info *master, * we want to have jffs2 (overlay) in the same mtd. */ if (trx->offset[i]) { + const char *name; + + name = bcm47xxpart_trx_data_part_name(master, offset + trx->offset[i]); bcm47xxpart_add_part(&parts[curr_part++], - "rootfs", + name, offset + trx->offset[i], 0); i++; @@ -205,7 +235,8 @@ static int bcm47xxpart_parse(struct mtd_info *master, } /* Squashfs on devices not using TRX */ - if (buf[0x000 / 4] == SQSH_MAGIC) { + if (le32_to_cpu(buf[0x000 / 4]) == SQUASHFS_MAGIC || + buf[0x000 / 4] == SHSQ_MAGIC) { bcm47xxpart_add_part(&parts[curr_part++], "rootfs", offset, 0); continue; diff --git a/drivers/mtd/chips/map_ram.c b/drivers/mtd/chips/map_ram.c index 991c2a1c05d3..afb43d5e1782 100644 --- a/drivers/mtd/chips/map_ram.c +++ b/drivers/mtd/chips/map_ram.c @@ -68,6 +68,7 @@ static struct mtd_info *map_ram_probe(struct map_info *map) mtd->_get_unmapped_area = mapram_unmapped_area; mtd->_read = mapram_read; mtd->_write = mapram_write; + mtd->_panic_write = mapram_write; mtd->_sync = mapram_nop; mtd->flags = MTD_CAP_RAM; mtd->writesize = 1; diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c index 47a43cf7e5c6..e67f73ab44c9 100644 --- a/drivers/mtd/chips/map_rom.c +++ b/drivers/mtd/chips/map_rom.c @@ -11,6 +11,7 @@ #include <linux/errno.h> #include <linux/slab.h> #include <linux/init.h> +#include <linux/of.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> @@ -28,6 +29,15 @@ static struct mtd_chip_driver maprom_chipdrv = { .module = THIS_MODULE }; +static unsigned int default_erasesize(struct map_info *map) +{ + const __be32 *erase_size = NULL; + + erase_size = of_get_property(map->device_node, "erase-size", NULL); + + return !erase_size ? map->size : be32_to_cpu(*erase_size); +} + static struct mtd_info *map_rom_probe(struct map_info *map) { struct mtd_info *mtd; @@ -47,8 +57,9 @@ static struct mtd_info *map_rom_probe(struct map_info *map) mtd->_sync = maprom_nop; mtd->_erase = maprom_erase; mtd->flags = MTD_CAP_ROM; - mtd->erasesize = map->size; + mtd->erasesize = default_erasesize(map); mtd->writesize = 1; + mtd->writebufsize = 1; __module_get(THIS_MODULE); return mtd; diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c index 54ffe5223e64..3060025c8af4 100644 --- a/drivers/mtd/devices/st_spi_fsm.c +++ b/drivers/mtd/devices/st_spi_fsm.c @@ -24,6 +24,7 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/of.h> +#include <linux/clk.h> #include "serial_flash_cmds.h" @@ -262,6 +263,7 @@ struct stfsm { struct mtd_info mtd; struct mutex lock; struct flash_info *info; + struct clk *clk; uint32_t configuration; uint32_t fifo_dir_delay; @@ -663,6 +665,23 @@ static struct stfsm_seq stfsm_seq_write_status = { SEQ_CFG_STARTSEQ), }; +/* Dummy sequence to read one byte of data from flash into the FIFO */ +static const struct stfsm_seq stfsm_seq_load_fifo_byte = { + .data_size = TRANSFER_SIZE(1), + .seq_opc[0] = (SEQ_OPC_PADS_1 | + SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(SPINOR_OP_RDID)), + .seq = { + STFSM_INST_CMD1, + STFSM_INST_DATA_READ, + STFSM_INST_STOP, + }, + .seq_cfg = (SEQ_CFG_PADS_1 | + SEQ_CFG_READNOTWRITE | + SEQ_CFG_CSDEASSERT | + SEQ_CFG_STARTSEQ), +}; + static int stfsm_n25q_en_32bit_addr_seq(struct stfsm_seq *seq) { seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | @@ -695,22 +714,6 @@ static inline uint32_t stfsm_fifo_available(struct stfsm *fsm) return (readl(fsm->base + SPI_FAST_SEQ_STA) >> 5) & 0x7f; } -static void stfsm_clear_fifo(struct stfsm *fsm) -{ - uint32_t avail; - - for (;;) { - avail = stfsm_fifo_available(fsm); - if (!avail) - break; - - while (avail) { - readl(fsm->base + SPI_FAST_SEQ_DATA_REG); - avail--; - } - } -} - static inline void stfsm_load_seq(struct stfsm *fsm, const struct stfsm_seq *seq) { @@ -772,6 +775,68 @@ static void stfsm_read_fifo(struct stfsm *fsm, uint32_t *buf, uint32_t size) } } +/* + * Clear the data FIFO + * + * Typically, this is only required during driver initialisation, where no + * assumptions can be made regarding the state of the FIFO. + * + * The process of clearing the FIFO is complicated by fact that while it is + * possible for the FIFO to contain an arbitrary number of bytes [1], the + * SPI_FAST_SEQ_STA register only reports the number of complete 32-bit words + * present. Furthermore, data can only be drained from the FIFO by reading + * complete 32-bit words. + * + * With this in mind, a two stage process is used to the clear the FIFO: + * + * 1. Read any complete 32-bit words from the FIFO, as reported by the + * SPI_FAST_SEQ_STA register. + * + * 2. Mop up any remaining bytes. At this point, it is not known if there + * are 0, 1, 2, or 3 bytes in the FIFO. To handle all cases, a dummy FSM + * sequence is used to load one byte at a time, until a complete 32-bit + * word is formed; at most, 4 bytes will need to be loaded. + * + * [1] It is theoretically possible for the FIFO to contain an arbitrary number + * of bits. However, since there are no known use-cases that leave + * incomplete bytes in the FIFO, only words and bytes are considered here. + */ +static void stfsm_clear_fifo(struct stfsm *fsm) +{ + const struct stfsm_seq *seq = &stfsm_seq_load_fifo_byte; + uint32_t words, i; + + /* 1. Clear any 32-bit words */ + words = stfsm_fifo_available(fsm); + if (words) { + for (i = 0; i < words; i++) + readl(fsm->base + SPI_FAST_SEQ_DATA_REG); + dev_dbg(fsm->dev, "cleared %d words from FIFO\n", words); + } + + /* + * 2. Clear any remaining bytes + * - Load the FIFO, one byte at a time, until a complete 32-bit word + * is available. + */ + for (i = 0, words = 0; i < 4 && !words; i++) { + stfsm_load_seq(fsm, seq); + stfsm_wait_seq(fsm); + words = stfsm_fifo_available(fsm); + } + + /* - A single word must be available now */ + if (words != 1) { + dev_err(fsm->dev, "failed to clear bytes from the data FIFO\n"); + return; + } + + /* - Read the 32-bit word */ + readl(fsm->base + SPI_FAST_SEQ_DATA_REG); + + dev_dbg(fsm->dev, "cleared %d byte(s) from the data FIFO\n", 4 - i); +} + static int stfsm_write_fifo(struct stfsm *fsm, const uint32_t *buf, uint32_t size) { @@ -1521,11 +1586,11 @@ static int stfsm_write(struct stfsm *fsm, const uint8_t *buf, uint32_t size_lb; uint32_t size_mop; uint32_t tmp[4]; + uint32_t i; uint32_t page_buf[FLASH_PAGESIZE_32]; uint8_t *t = (uint8_t *)&tmp; const uint8_t *p; int ret; - int i; dev_dbg(fsm->dev, "writing %d bytes to 0x%08x\n", size, offset); @@ -1843,8 +1908,7 @@ static void stfsm_set_freq(struct stfsm *fsm, uint32_t spi_freq) uint32_t emi_freq; uint32_t clk_div; - /* TODO: Make this dynamic */ - emi_freq = STFSM_DEFAULT_EMI_FREQ; + emi_freq = clk_get_rate(fsm->clk); /* * Calculate clk_div - values between 2 and 128 @@ -1994,6 +2058,18 @@ static int stfsm_probe(struct platform_device *pdev) return PTR_ERR(fsm->base); } + fsm->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(fsm->clk)) { + dev_err(fsm->dev, "Couldn't find EMI clock.\n"); + return PTR_ERR(fsm->clk); + } + + ret = clk_prepare_enable(fsm->clk); + if (ret) { + dev_err(fsm->dev, "Failed to enable EMI clock.\n"); + return ret; + } + mutex_init(&fsm->lock); ret = stfsm_init(fsm); @@ -2058,6 +2134,28 @@ static int stfsm_remove(struct platform_device *pdev) return mtd_device_unregister(&fsm->mtd); } +#ifdef CONFIG_PM_SLEEP +static int stfsmfsm_suspend(struct device *dev) +{ + struct stfsm *fsm = dev_get_drvdata(dev); + + clk_disable_unprepare(fsm->clk); + + return 0; +} + +static int stfsmfsm_resume(struct device *dev) +{ + struct stfsm *fsm = dev_get_drvdata(dev); + + clk_prepare_enable(fsm->clk); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(stfsm_pm_ops, stfsmfsm_suspend, stfsmfsm_resume); + static const struct of_device_id stfsm_match[] = { { .compatible = "st,spi-fsm", }, {}, @@ -2070,6 +2168,7 @@ static struct platform_driver stfsm_driver = { .driver = { .name = "st-spi-fsm", .of_match_table = stfsm_match, + .pm = &stfsm_pm_ops, }, }; module_platform_driver(stfsm_driver); diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c index f35cd2081314..ff26e979b1a1 100644 --- a/drivers/mtd/maps/physmap_of.c +++ b/drivers/mtd/maps/physmap_of.c @@ -269,6 +269,16 @@ static int of_flash_probe(struct platform_device *dev) info->list[i].mtd = obsolete_probe(dev, &info->list[i].map); } + + /* Fall back to mapping region as ROM */ + if (!info->list[i].mtd) { + dev_warn(&dev->dev, + "do_map_probe() failed for type %s\n", + probe_type); + + info->list[i].mtd = do_map_probe("map_rom", + &info->list[i].map); + } mtd_list[i] = info->list[i].mtd; err = -ENXIO; diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c index 485ea751c7f9..bb4c14f83c75 100644 --- a/drivers/mtd/mtdblock.c +++ b/drivers/mtd/mtdblock.c @@ -45,8 +45,6 @@ struct mtdblk_dev { enum { STATE_EMPTY, STATE_CLEAN, STATE_DIRTY } cache_state; }; -static DEFINE_MUTEX(mtdblks_lock); - /* * Cache stuff... * @@ -286,10 +284,8 @@ static int mtdblock_open(struct mtd_blktrans_dev *mbd) pr_debug("mtdblock_open\n"); - mutex_lock(&mtdblks_lock); if (mtdblk->count) { mtdblk->count++; - mutex_unlock(&mtdblks_lock); return 0; } @@ -302,8 +298,6 @@ static int mtdblock_open(struct mtd_blktrans_dev *mbd) mtdblk->cache_data = NULL; } - mutex_unlock(&mtdblks_lock); - pr_debug("ok\n"); return 0; @@ -315,8 +309,6 @@ static void mtdblock_release(struct mtd_blktrans_dev *mbd) pr_debug("mtdblock_release\n"); - mutex_lock(&mtdblks_lock); - mutex_lock(&mtdblk->cache_mutex); write_cached_data(mtdblk); mutex_unlock(&mtdblk->cache_mutex); @@ -331,8 +323,6 @@ static void mtdblock_release(struct mtd_blktrans_dev *mbd) vfree(mtdblk->cache_data); } - mutex_unlock(&mtdblks_lock); - pr_debug("ok\n"); } diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c index eacc3aac7327..239a8c806b67 100644 --- a/drivers/mtd/mtdconcat.c +++ b/drivers/mtd/mtdconcat.c @@ -311,7 +311,8 @@ concat_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops) devops.len = subdev->size - to; err = mtd_write_oob(subdev, to, &devops); - ops->retlen += devops.oobretlen; + ops->retlen += devops.retlen; + ops->oobretlen += devops.oobretlen; if (err) return err; diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 0ec4d6ea1e4b..11883bd26d9d 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -37,6 +37,7 @@ #include <linux/backing-dev.h> #include <linux/gfp.h> #include <linux/slab.h> +#include <linux/reboot.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -356,6 +357,17 @@ unsigned mtd_mmap_capabilities(struct mtd_info *mtd) EXPORT_SYMBOL_GPL(mtd_mmap_capabilities); #endif +static int mtd_reboot_notifier(struct notifier_block *n, unsigned long state, + void *cmd) +{ + struct mtd_info *mtd; + + mtd = container_of(n, struct mtd_info, reboot_notifier); + mtd->_reboot(mtd); + + return NOTIFY_DONE; +} + /** * add_mtd_device - register an MTD device * @mtd: pointer to new MTD device info structure @@ -544,6 +556,19 @@ int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types, err = -ENODEV; } + /* + * FIXME: some drivers unfortunately call this function more than once. + * So we have to check if we've already assigned the reboot notifier. + * + * Generally, we can make multiple calls work for most cases, but it + * does cause problems with parse_mtd_partitions() above (e.g., + * cmdlineparts will register partitions more than once). + */ + if (mtd->_reboot && !mtd->reboot_notifier.notifier_call) { + mtd->reboot_notifier.notifier_call = mtd_reboot_notifier; + register_reboot_notifier(&mtd->reboot_notifier); + } + return err; } EXPORT_SYMBOL_GPL(mtd_device_parse_register); @@ -558,6 +583,9 @@ int mtd_device_unregister(struct mtd_info *master) { int err; + if (master->_reboot) + unregister_reboot_notifier(&master->reboot_notifier); + err = del_mtd_partitions(master); if (err) return err; diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 7d0150d20432..5b76a173cd95 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -421,7 +421,7 @@ config MTD_NAND_ORION config MTD_NAND_FSL_ELBC tristate "NAND support for Freescale eLBC controllers" - depends on PPC_OF + depends on PPC select FSL_LBC help Various Freescale chips, including the 8313, include a NAND Flash @@ -524,4 +524,9 @@ config MTD_NAND_SUNXI help Enables support for NAND Flash chips on Allwinner SoCs. +config MTD_NAND_HISI504 + tristate "Support for NAND controller on Hisilicon SoC Hip04" + help + Enables support for NAND controller on Hisilicon SoC Hip04. + endif # MTD_NAND diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index bd38f21d2e28..582bbd05aff7 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -51,5 +51,6 @@ obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/ obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/ obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o +obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o nand-objs := nand_base.o nand_bbt.o nand_timings.o diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index f1d555cfb332..842f8fe91b56 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -183,7 +183,7 @@ static int ams_delta_init(struct platform_device *pdev) return -ENXIO; /* Allocate memory for MTD device structure and private data */ - ams_delta_mtd = kmalloc(sizeof(struct mtd_info) + + ams_delta_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); if (!ams_delta_mtd) { printk (KERN_WARNING "Unable to allocate E3 NAND MTD device structure.\n"); @@ -196,10 +196,6 @@ static int ams_delta_init(struct platform_device *pdev) /* Get pointer to private data */ this = (struct nand_chip *) (&ams_delta_mtd[1]); - /* Initialize structures */ - memset(ams_delta_mtd, 0, sizeof(struct mtd_info)); - memset(this, 0, sizeof(struct nand_chip)); - /* Link the private data with the MTD structure */ ams_delta_mtd->priv = this; diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index a345e7b2463a..d93c849b70b5 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -63,6 +63,10 @@ module_param(on_flash_bbt, int, 0); #include "atmel_nand_ecc.h" /* Hardware ECC registers */ #include "atmel_nand_nfc.h" /* Nand Flash Controller definition */ +struct atmel_nand_caps { + bool pmecc_correct_erase_page; +}; + /* oob layout for large page size * bad block info is on bytes 0 and 1 * the bytes have to be consecutives to avoid @@ -124,6 +128,7 @@ struct atmel_nand_host { struct atmel_nfc *nfc; + struct atmel_nand_caps *caps; bool has_pmecc; u8 pmecc_corr_cap; u16 pmecc_sector_size; @@ -847,7 +852,11 @@ static int pmecc_correction(struct mtd_info *mtd, u32 pmecc_stat, uint8_t *buf, struct atmel_nand_host *host = nand_chip->priv; int i, err_nbr; uint8_t *buf_pos; - int total_err = 0; + int max_bitflips = 0; + + /* If can correct bitfilps from erased page, do the normal check */ + if (host->caps->pmecc_correct_erase_page) + goto normal_check; for (i = 0; i < nand_chip->ecc.total; i++) if (ecc[i] != 0xff) @@ -874,13 +883,13 @@ normal_check: pmecc_correct_data(mtd, buf_pos, ecc, i, nand_chip->ecc.bytes, err_nbr); mtd->ecc_stats.corrected += err_nbr; - total_err += err_nbr; + max_bitflips = max_t(int, max_bitflips, err_nbr); } } pmecc_stat >>= 1; } - return total_err; + return max_bitflips; } static void pmecc_enable(struct atmel_nand_host *host, int ecc_op) @@ -1474,6 +1483,8 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode) ecc_writel(host->ecc, CR, ATMEL_ECC_RST); } +static const struct of_device_id atmel_nand_dt_ids[]; + static int atmel_of_init_port(struct atmel_nand_host *host, struct device_node *np) { @@ -1483,6 +1494,9 @@ static int atmel_of_init_port(struct atmel_nand_host *host, struct atmel_nand_data *board = &host->board; enum of_gpio_flags flags = 0; + host->caps = (struct atmel_nand_caps *) + of_match_device(atmel_nand_dt_ids, host->dev)->data; + if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) { if (val >= 32) { dev_err(host->dev, "invalid addr-offset %u\n", val); @@ -2288,8 +2302,17 @@ static int atmel_nand_remove(struct platform_device *pdev) return 0; } +static struct atmel_nand_caps at91rm9200_caps = { + .pmecc_correct_erase_page = false, +}; + +static struct atmel_nand_caps sama5d4_caps = { + .pmecc_correct_erase_page = true, +}; + static const struct of_device_id atmel_nand_dt_ids[] = { - { .compatible = "atmel,at91rm9200-nand" }, + { .compatible = "atmel,at91rm9200-nand", .data = &at91rm9200_caps }, + { .compatible = "atmel,sama5d4-nand", .data = &sama5d4_caps }, { /* sentinel */ } }; diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index b3b7ca1bafb8..f44c6061536a 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -1041,7 +1041,7 @@ static void denali_setup_dma(struct denali_nand_info *denali, int op) index_addr(denali, mode | ((addr >> 16) << 8), 0x2200); /* 3. set memory low address bits 23:8 */ - index_addr(denali, mode | ((addr & 0xff) << 8), 0x2300); + index_addr(denali, mode | ((addr & 0xffff) << 8), 0x2300); /* 4. interrupt when complete, burst len = 64 bytes */ index_addr(denali, mode | 0x14000, 0x2400); @@ -1328,35 +1328,6 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, break; } } - -/* stubs for ECC functions not used by the NAND core */ -static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data, - uint8_t *ecc_code) -{ - struct denali_nand_info *denali = mtd_to_denali(mtd); - - dev_err(denali->dev, "denali_ecc_calculate called unexpectedly\n"); - BUG(); - return -EIO; -} - -static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data, - uint8_t *read_ecc, uint8_t *calc_ecc) -{ - struct denali_nand_info *denali = mtd_to_denali(mtd); - - dev_err(denali->dev, "denali_ecc_correct called unexpectedly\n"); - BUG(); - return -EIO; -} - -static void denali_ecc_hwctl(struct mtd_info *mtd, int mode) -{ - struct denali_nand_info *denali = mtd_to_denali(mtd); - - dev_err(denali->dev, "denali_ecc_hwctl called unexpectedly\n"); - BUG(); -} /* end NAND core entry points */ /* Initialization code to bring the device up to a known good state */ @@ -1609,15 +1580,6 @@ int denali_init(struct denali_nand_info *denali) denali->totalblks = denali->mtd.size >> denali->nand.phys_erase_shift; denali->blksperchip = denali->totalblks / denali->nand.numchips; - /* - * These functions are required by the NAND core framework, otherwise, - * the NAND core will assert. However, we don't need them, so we'll stub - * them out. - */ - denali->nand.ecc.calculate = denali_ecc_calculate; - denali->nand.ecc.correct = denali_ecc_correct; - denali->nand.ecc.hwctl = denali_ecc_hwctl; - /* override the default read operations */ denali->nand.ecc.size = ECC_SECTOR_SIZE * denali->devnum; denali->nand.ecc.read_page = denali_read_page; diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 4f3851a24bb2..33f3c3c54dbc 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -1294,14 +1294,6 @@ exit_auxiliary: * ecc.read_page or ecc.read_page_raw function. Thus, the fact that MTD wants an * ECC-based or raw view of the page is implicit in which function it calls * (there is a similar pair of ECC-based/raw functions for writing). - * - * FIXME: The following paragraph is incorrect, now that there exist - * ecc.read_oob_raw and ecc.write_oob_raw functions. - * - * Since MTD assumes the OOB is not covered by ECC, there is no pair of - * ECC-based/raw functions for reading or or writing the OOB. The fact that the - * caller wants an ECC-based or raw view of the page is not propagated down to - * this driver. */ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip, int page) @@ -2029,7 +2021,6 @@ static int gpmi_nand_probe(struct platform_device *pdev) exit_nfc_init: release_resources(this); exit_acquire_resources: - dev_err(this->dev, "driver registration failed: %d\n", ret); return ret; } diff --git a/drivers/mtd/nand/hisi504_nand.c b/drivers/mtd/nand/hisi504_nand.c new file mode 100644 index 000000000000..289ad3ac3e80 --- /dev/null +++ b/drivers/mtd/nand/hisi504_nand.c @@ -0,0 +1,891 @@ +/* + * Hisilicon NAND Flash controller driver + * + * Copyright © 2012-2014 HiSilicon Technologies Co., Ltd. + * http://www.hisilicon.com + * + * Author: Zhou Wang <wangzhou.bry@gmail.com> + * The initial developer of the original code is Zhiyong Cai + * <caizhiyong@huawei.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/of.h> +#include <linux/of_mtd.h> +#include <linux/mtd/mtd.h> +#include <linux/sizes.h> +#include <linux/clk.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/mtd/nand.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> + +#define HINFC504_MAX_CHIP (4) +#define HINFC504_W_LATCH (5) +#define HINFC504_R_LATCH (7) +#define HINFC504_RW_LATCH (3) + +#define HINFC504_NFC_TIMEOUT (2 * HZ) +#define HINFC504_NFC_PM_TIMEOUT (1 * HZ) +#define HINFC504_NFC_DMA_TIMEOUT (5 * HZ) +#define HINFC504_CHIP_DELAY (25) + +#define HINFC504_REG_BASE_ADDRESS_LEN (0x100) +#define HINFC504_BUFFER_BASE_ADDRESS_LEN (2048 + 128) + +#define HINFC504_ADDR_CYCLE_MASK 0x4 + +#define HINFC504_CON 0x00 +#define HINFC504_CON_OP_MODE_NORMAL BIT(0) +#define HINFC504_CON_PAGEISZE_SHIFT (1) +#define HINFC504_CON_PAGESIZE_MASK (0x07) +#define HINFC504_CON_BUS_WIDTH BIT(4) +#define HINFC504_CON_READY_BUSY_SEL BIT(8) +#define HINFC504_CON_ECCTYPE_SHIFT (9) +#define HINFC504_CON_ECCTYPE_MASK (0x07) + +#define HINFC504_PWIDTH 0x04 +#define SET_HINFC504_PWIDTH(_w_lcnt, _r_lcnt, _rw_hcnt) \ + ((_w_lcnt) | (((_r_lcnt) & 0x0F) << 4) | (((_rw_hcnt) & 0x0F) << 8)) + +#define HINFC504_CMD 0x0C +#define HINFC504_ADDRL 0x10 +#define HINFC504_ADDRH 0x14 +#define HINFC504_DATA_NUM 0x18 + +#define HINFC504_OP 0x1C +#define HINFC504_OP_READ_DATA_EN BIT(1) +#define HINFC504_OP_WAIT_READY_EN BIT(2) +#define HINFC504_OP_CMD2_EN BIT(3) +#define HINFC504_OP_WRITE_DATA_EN BIT(4) +#define HINFC504_OP_ADDR_EN BIT(5) +#define HINFC504_OP_CMD1_EN BIT(6) +#define HINFC504_OP_NF_CS_SHIFT (7) +#define HINFC504_OP_NF_CS_MASK (3) +#define HINFC504_OP_ADDR_CYCLE_SHIFT (9) +#define HINFC504_OP_ADDR_CYCLE_MASK (7) + +#define HINFC504_STATUS 0x20 +#define HINFC504_READY BIT(0) + +#define HINFC504_INTEN 0x24 +#define HINFC504_INTEN_DMA BIT(9) +#define HINFC504_INTEN_UE BIT(6) +#define HINFC504_INTEN_CE BIT(5) + +#define HINFC504_INTS 0x28 +#define HINFC504_INTS_DMA BIT(9) +#define HINFC504_INTS_UE BIT(6) +#define HINFC504_INTS_CE BIT(5) + +#define HINFC504_INTCLR 0x2C +#define HINFC504_INTCLR_DMA BIT(9) +#define HINFC504_INTCLR_UE BIT(6) +#define HINFC504_INTCLR_CE BIT(5) + +#define HINFC504_ECC_STATUS 0x5C +#define HINFC504_ECC_16_BIT_SHIFT 12 + +#define HINFC504_DMA_CTRL 0x60 +#define HINFC504_DMA_CTRL_DMA_START BIT(0) +#define HINFC504_DMA_CTRL_WE BIT(1) +#define HINFC504_DMA_CTRL_DATA_AREA_EN BIT(2) +#define HINFC504_DMA_CTRL_OOB_AREA_EN BIT(3) +#define HINFC504_DMA_CTRL_BURST4_EN BIT(4) +#define HINFC504_DMA_CTRL_BURST8_EN BIT(5) +#define HINFC504_DMA_CTRL_BURST16_EN BIT(6) +#define HINFC504_DMA_CTRL_ADDR_NUM_SHIFT (7) +#define HINFC504_DMA_CTRL_ADDR_NUM_MASK (1) +#define HINFC504_DMA_CTRL_CS_SHIFT (8) +#define HINFC504_DMA_CTRL_CS_MASK (0x03) + +#define HINFC504_DMA_ADDR_DATA 0x64 +#define HINFC504_DMA_ADDR_OOB 0x68 + +#define HINFC504_DMA_LEN 0x6C +#define HINFC504_DMA_LEN_OOB_SHIFT (16) +#define HINFC504_DMA_LEN_OOB_MASK (0xFFF) + +#define HINFC504_DMA_PARA 0x70 +#define HINFC504_DMA_PARA_DATA_RW_EN BIT(0) +#define HINFC504_DMA_PARA_OOB_RW_EN BIT(1) +#define HINFC504_DMA_PARA_DATA_EDC_EN BIT(2) +#define HINFC504_DMA_PARA_OOB_EDC_EN BIT(3) +#define HINFC504_DMA_PARA_DATA_ECC_EN BIT(4) +#define HINFC504_DMA_PARA_OOB_ECC_EN BIT(5) + +#define HINFC_VERSION 0x74 +#define HINFC504_LOG_READ_ADDR 0x7C +#define HINFC504_LOG_READ_LEN 0x80 + +#define HINFC504_NANDINFO_LEN 0x10 + +struct hinfc_host { + struct nand_chip chip; + struct mtd_info mtd; + struct device *dev; + void __iomem *iobase; + void __iomem *mmio; + struct completion cmd_complete; + unsigned int offset; + unsigned int command; + int chipselect; + unsigned int addr_cycle; + u32 addr_value[2]; + u32 cache_addr_value[2]; + char *buffer; + dma_addr_t dma_buffer; + dma_addr_t dma_oob; + int version; + unsigned int irq_status; /* interrupt status */ +}; + +static inline unsigned int hinfc_read(struct hinfc_host *host, unsigned int reg) +{ + return readl(host->iobase + reg); +} + +static inline void hinfc_write(struct hinfc_host *host, unsigned int value, + unsigned int reg) +{ + writel(value, host->iobase + reg); +} + +static void wait_controller_finished(struct hinfc_host *host) +{ + unsigned long timeout = jiffies + HINFC504_NFC_TIMEOUT; + int val; + + while (time_before(jiffies, timeout)) { + val = hinfc_read(host, HINFC504_STATUS); + if (host->command == NAND_CMD_ERASE2) { + /* nfc is ready */ + while (!(val & HINFC504_READY)) { + usleep_range(500, 1000); + val = hinfc_read(host, HINFC504_STATUS); + } + return; + } + + if (val & HINFC504_READY) + return; + } + + /* wait cmd timeout */ + dev_err(host->dev, "Wait NAND controller exec cmd timeout.\n"); +} + +static void hisi_nfc_dma_transfer(struct hinfc_host *host, int todev) +{ + struct mtd_info *mtd = &host->mtd; + struct nand_chip *chip = mtd->priv; + unsigned long val; + int ret; + + hinfc_write(host, host->dma_buffer, HINFC504_DMA_ADDR_DATA); + hinfc_write(host, host->dma_oob, HINFC504_DMA_ADDR_OOB); + + if (chip->ecc.mode == NAND_ECC_NONE) { + hinfc_write(host, ((mtd->oobsize & HINFC504_DMA_LEN_OOB_MASK) + << HINFC504_DMA_LEN_OOB_SHIFT), HINFC504_DMA_LEN); + + hinfc_write(host, HINFC504_DMA_PARA_DATA_RW_EN + | HINFC504_DMA_PARA_OOB_RW_EN, HINFC504_DMA_PARA); + } else { + if (host->command == NAND_CMD_READOOB) + hinfc_write(host, HINFC504_DMA_PARA_OOB_RW_EN + | HINFC504_DMA_PARA_OOB_EDC_EN + | HINFC504_DMA_PARA_OOB_ECC_EN, HINFC504_DMA_PARA); + else + hinfc_write(host, HINFC504_DMA_PARA_DATA_RW_EN + | HINFC504_DMA_PARA_OOB_RW_EN + | HINFC504_DMA_PARA_DATA_EDC_EN + | HINFC504_DMA_PARA_OOB_EDC_EN + | HINFC504_DMA_PARA_DATA_ECC_EN + | HINFC504_DMA_PARA_OOB_ECC_EN, HINFC504_DMA_PARA); + + } + + val = (HINFC504_DMA_CTRL_DMA_START | HINFC504_DMA_CTRL_BURST4_EN + | HINFC504_DMA_CTRL_BURST8_EN | HINFC504_DMA_CTRL_BURST16_EN + | HINFC504_DMA_CTRL_DATA_AREA_EN | HINFC504_DMA_CTRL_OOB_AREA_EN + | ((host->addr_cycle == 4 ? 1 : 0) + << HINFC504_DMA_CTRL_ADDR_NUM_SHIFT) + | ((host->chipselect & HINFC504_DMA_CTRL_CS_MASK) + << HINFC504_DMA_CTRL_CS_SHIFT)); + + if (todev) + val |= HINFC504_DMA_CTRL_WE; + + init_completion(&host->cmd_complete); + + hinfc_write(host, val, HINFC504_DMA_CTRL); + ret = wait_for_completion_timeout(&host->cmd_complete, + HINFC504_NFC_DMA_TIMEOUT); + + if (!ret) { + dev_err(host->dev, "DMA operation(irq) timeout!\n"); + /* sanity check */ + val = hinfc_read(host, HINFC504_DMA_CTRL); + if (!(val & HINFC504_DMA_CTRL_DMA_START)) + dev_err(host->dev, "DMA is already done but without irq ACK!\n"); + else + dev_err(host->dev, "DMA is really timeout!\n"); + } +} + +static int hisi_nfc_send_cmd_pageprog(struct hinfc_host *host) +{ + host->addr_value[0] &= 0xffff0000; + + hinfc_write(host, host->addr_value[0], HINFC504_ADDRL); + hinfc_write(host, host->addr_value[1], HINFC504_ADDRH); + hinfc_write(host, NAND_CMD_PAGEPROG << 8 | NAND_CMD_SEQIN, + HINFC504_CMD); + + hisi_nfc_dma_transfer(host, 1); + + return 0; +} + +static int hisi_nfc_send_cmd_readstart(struct hinfc_host *host) +{ + struct mtd_info *mtd = &host->mtd; + + if ((host->addr_value[0] == host->cache_addr_value[0]) && + (host->addr_value[1] == host->cache_addr_value[1])) + return 0; + + host->addr_value[0] &= 0xffff0000; + + hinfc_write(host, host->addr_value[0], HINFC504_ADDRL); + hinfc_write(host, host->addr_value[1], HINFC504_ADDRH); + hinfc_write(host, NAND_CMD_READSTART << 8 | NAND_CMD_READ0, + HINFC504_CMD); + + hinfc_write(host, 0, HINFC504_LOG_READ_ADDR); + hinfc_write(host, mtd->writesize + mtd->oobsize, + HINFC504_LOG_READ_LEN); + + hisi_nfc_dma_transfer(host, 0); + + host->cache_addr_value[0] = host->addr_value[0]; + host->cache_addr_value[1] = host->addr_value[1]; + + return 0; +} + +static int hisi_nfc_send_cmd_erase(struct hinfc_host *host) +{ + hinfc_write(host, host->addr_value[0], HINFC504_ADDRL); + hinfc_write(host, (NAND_CMD_ERASE2 << 8) | NAND_CMD_ERASE1, + HINFC504_CMD); + + hinfc_write(host, HINFC504_OP_WAIT_READY_EN + | HINFC504_OP_CMD2_EN + | HINFC504_OP_CMD1_EN + | HINFC504_OP_ADDR_EN + | ((host->chipselect & HINFC504_OP_NF_CS_MASK) + << HINFC504_OP_NF_CS_SHIFT) + | ((host->addr_cycle & HINFC504_OP_ADDR_CYCLE_MASK) + << HINFC504_OP_ADDR_CYCLE_SHIFT), + HINFC504_OP); + + wait_controller_finished(host); + + return 0; +} + +static int hisi_nfc_send_cmd_readid(struct hinfc_host *host) +{ + hinfc_write(host, HINFC504_NANDINFO_LEN, HINFC504_DATA_NUM); + hinfc_write(host, NAND_CMD_READID, HINFC504_CMD); + hinfc_write(host, 0, HINFC504_ADDRL); + + hinfc_write(host, HINFC504_OP_CMD1_EN | HINFC504_OP_ADDR_EN + | HINFC504_OP_READ_DATA_EN + | ((host->chipselect & HINFC504_OP_NF_CS_MASK) + << HINFC504_OP_NF_CS_SHIFT) + | 1 << HINFC504_OP_ADDR_CYCLE_SHIFT, HINFC504_OP); + + wait_controller_finished(host); + + return 0; +} + +static int hisi_nfc_send_cmd_status(struct hinfc_host *host) +{ + hinfc_write(host, HINFC504_NANDINFO_LEN, HINFC504_DATA_NUM); + hinfc_write(host, NAND_CMD_STATUS, HINFC504_CMD); + hinfc_write(host, HINFC504_OP_CMD1_EN + | HINFC504_OP_READ_DATA_EN + | ((host->chipselect & HINFC504_OP_NF_CS_MASK) + << HINFC504_OP_NF_CS_SHIFT), + HINFC504_OP); + + wait_controller_finished(host); + + return 0; +} + +static int hisi_nfc_send_cmd_reset(struct hinfc_host *host, int chipselect) +{ + hinfc_write(host, NAND_CMD_RESET, HINFC504_CMD); + + hinfc_write(host, HINFC504_OP_CMD1_EN + | ((chipselect & HINFC504_OP_NF_CS_MASK) + << HINFC504_OP_NF_CS_SHIFT) + | HINFC504_OP_WAIT_READY_EN, + HINFC504_OP); + + wait_controller_finished(host); + + return 0; +} + +static void hisi_nfc_select_chip(struct mtd_info *mtd, int chipselect) +{ + struct nand_chip *chip = mtd->priv; + struct hinfc_host *host = chip->priv; + + if (chipselect < 0) + return; + + host->chipselect = chipselect; +} + +static uint8_t hisi_nfc_read_byte(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + struct hinfc_host *host = chip->priv; + + if (host->command == NAND_CMD_STATUS) + return *(uint8_t *)(host->mmio); + + host->offset++; + + if (host->command == NAND_CMD_READID) + return *(uint8_t *)(host->mmio + host->offset - 1); + + return *(uint8_t *)(host->buffer + host->offset - 1); +} + +static u16 hisi_nfc_read_word(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + struct hinfc_host *host = chip->priv; + + host->offset += 2; + return *(u16 *)(host->buffer + host->offset - 2); +} + +static void +hisi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) +{ + struct nand_chip *chip = mtd->priv; + struct hinfc_host *host = chip->priv; + + memcpy(host->buffer + host->offset, buf, len); + host->offset += len; +} + +static void hisi_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + struct nand_chip *chip = mtd->priv; + struct hinfc_host *host = chip->priv; + + memcpy(buf, host->buffer + host->offset, len); + host->offset += len; +} + +static void set_addr(struct mtd_info *mtd, int column, int page_addr) +{ + struct nand_chip *chip = mtd->priv; + struct hinfc_host *host = chip->priv; + unsigned int command = host->command; + + host->addr_cycle = 0; + host->addr_value[0] = 0; + host->addr_value[1] = 0; + + /* Serially input address */ + if (column != -1) { + /* Adjust columns for 16 bit buswidth */ + if (chip->options & NAND_BUSWIDTH_16 && + !nand_opcode_8bits(command)) + column >>= 1; + + host->addr_value[0] = column & 0xffff; + host->addr_cycle = 2; + } + if (page_addr != -1) { + host->addr_value[0] |= (page_addr & 0xffff) + << (host->addr_cycle * 8); + host->addr_cycle += 2; + /* One more address cycle for devices > 128MiB */ + if (chip->chipsize > (128 << 20)) { + host->addr_cycle += 1; + if (host->command == NAND_CMD_ERASE1) + host->addr_value[0] |= ((page_addr >> 16) & 0xff) << 16; + else + host->addr_value[1] |= ((page_addr >> 16) & 0xff); + } + } +} + +static void hisi_nfc_cmdfunc(struct mtd_info *mtd, unsigned command, int column, + int page_addr) +{ + struct nand_chip *chip = mtd->priv; + struct hinfc_host *host = chip->priv; + int is_cache_invalid = 1; + unsigned int flag = 0; + + host->command = command; + + switch (command) { + case NAND_CMD_READ0: + case NAND_CMD_READOOB: + if (command == NAND_CMD_READ0) + host->offset = column; + else + host->offset = column + mtd->writesize; + + is_cache_invalid = 0; + set_addr(mtd, column, page_addr); + hisi_nfc_send_cmd_readstart(host); + break; + + case NAND_CMD_SEQIN: + host->offset = column; + set_addr(mtd, column, page_addr); + break; + + case NAND_CMD_ERASE1: + set_addr(mtd, column, page_addr); + break; + + case NAND_CMD_PAGEPROG: + hisi_nfc_send_cmd_pageprog(host); + break; + + case NAND_CMD_ERASE2: + hisi_nfc_send_cmd_erase(host); + break; + + case NAND_CMD_READID: + host->offset = column; + memset(host->mmio, 0, 0x10); + hisi_nfc_send_cmd_readid(host); + break; + + case NAND_CMD_STATUS: + flag = hinfc_read(host, HINFC504_CON); + if (chip->ecc.mode == NAND_ECC_HW) + hinfc_write(host, + flag & ~(HINFC504_CON_ECCTYPE_MASK << + HINFC504_CON_ECCTYPE_SHIFT), HINFC504_CON); + + host->offset = 0; + memset(host->mmio, 0, 0x10); + hisi_nfc_send_cmd_status(host); + hinfc_write(host, flag, HINFC504_CON); + break; + + case NAND_CMD_RESET: + hisi_nfc_send_cmd_reset(host, host->chipselect); + break; + + default: + dev_err(host->dev, "Error: unsupported cmd(cmd=%x, col=%x, page=%x)\n", + command, column, page_addr); + } + + if (is_cache_invalid) { + host->cache_addr_value[0] = ~0; + host->cache_addr_value[1] = ~0; + } +} + +static irqreturn_t hinfc_irq_handle(int irq, void *devid) +{ + struct hinfc_host *host = devid; + unsigned int flag; + + flag = hinfc_read(host, HINFC504_INTS); + /* store interrupts state */ + host->irq_status |= flag; + + if (flag & HINFC504_INTS_DMA) { + hinfc_write(host, HINFC504_INTCLR_DMA, HINFC504_INTCLR); + complete(&host->cmd_complete); + } else if (flag & HINFC504_INTS_CE) { + hinfc_write(host, HINFC504_INTCLR_CE, HINFC504_INTCLR); + } else if (flag & HINFC504_INTS_UE) { + hinfc_write(host, HINFC504_INTCLR_UE, HINFC504_INTCLR); + } + + return IRQ_HANDLED; +} + +static int hisi_nand_read_page_hwecc(struct mtd_info *mtd, + struct nand_chip *chip, uint8_t *buf, int oob_required, int page) +{ + struct hinfc_host *host = chip->priv; + int max_bitflips = 0, stat = 0, stat_max = 0, status_ecc; + int stat_1, stat_2; + + chip->read_buf(mtd, buf, mtd->writesize); + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + + /* errors which can not be corrected by ECC */ + if (host->irq_status & HINFC504_INTS_UE) { + mtd->ecc_stats.failed++; + } else if (host->irq_status & HINFC504_INTS_CE) { + /* TODO: need add other ECC modes! */ + switch (chip->ecc.strength) { + case 16: + status_ecc = hinfc_read(host, HINFC504_ECC_STATUS) >> + HINFC504_ECC_16_BIT_SHIFT & 0x0fff; + stat_2 = status_ecc & 0x3f; + stat_1 = status_ecc >> 6 & 0x3f; + stat = stat_1 + stat_2; + stat_max = max_t(int, stat_1, stat_2); + } + mtd->ecc_stats.corrected += stat; + max_bitflips = max_t(int, max_bitflips, stat_max); + } + host->irq_status = 0; + + return max_bitflips; +} + +static int hisi_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip, + int page) +{ + struct hinfc_host *host = chip->priv; + + chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + + if (host->irq_status & HINFC504_INTS_UE) { + host->irq_status = 0; + return -EBADMSG; + } + + host->irq_status = 0; + return 0; +} + +static int hisi_nand_write_page_hwecc(struct mtd_info *mtd, + struct nand_chip *chip, const uint8_t *buf, int oob_required) +{ + chip->write_buf(mtd, buf, mtd->writesize); + if (oob_required) + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; +} + +static void hisi_nfc_host_init(struct hinfc_host *host) +{ + struct nand_chip *chip = &host->chip; + unsigned int flag = 0; + + host->version = hinfc_read(host, HINFC_VERSION); + host->addr_cycle = 0; + host->addr_value[0] = 0; + host->addr_value[1] = 0; + host->cache_addr_value[0] = ~0; + host->cache_addr_value[1] = ~0; + host->chipselect = 0; + + /* default page size: 2K, ecc_none. need modify */ + flag = HINFC504_CON_OP_MODE_NORMAL | HINFC504_CON_READY_BUSY_SEL + | ((0x001 & HINFC504_CON_PAGESIZE_MASK) + << HINFC504_CON_PAGEISZE_SHIFT) + | ((0x0 & HINFC504_CON_ECCTYPE_MASK) + << HINFC504_CON_ECCTYPE_SHIFT) + | ((chip->options & NAND_BUSWIDTH_16) ? + HINFC504_CON_BUS_WIDTH : 0); + hinfc_write(host, flag, HINFC504_CON); + + memset(host->mmio, 0xff, HINFC504_BUFFER_BASE_ADDRESS_LEN); + + hinfc_write(host, SET_HINFC504_PWIDTH(HINFC504_W_LATCH, + HINFC504_R_LATCH, HINFC504_RW_LATCH), HINFC504_PWIDTH); + + /* enable DMA irq */ + hinfc_write(host, HINFC504_INTEN_DMA, HINFC504_INTEN); +} + +static struct nand_ecclayout nand_ecc_2K_16bits = { + .oobavail = 6, + .oobfree = { {2, 6} }, +}; + +static int hisi_nfc_ecc_probe(struct hinfc_host *host) +{ + unsigned int flag; + int size, strength, ecc_bits; + struct device *dev = host->dev; + struct nand_chip *chip = &host->chip; + struct mtd_info *mtd = &host->mtd; + struct device_node *np = host->dev->of_node; + + size = of_get_nand_ecc_step_size(np); + strength = of_get_nand_ecc_strength(np); + if (size != 1024) { + dev_err(dev, "error ecc size: %d\n", size); + return -EINVAL; + } + + if ((size == 1024) && ((strength != 8) && (strength != 16) && + (strength != 24) && (strength != 40))) { + dev_err(dev, "ecc size and strength do not match\n"); + return -EINVAL; + } + + chip->ecc.size = size; + chip->ecc.strength = strength; + + chip->ecc.read_page = hisi_nand_read_page_hwecc; + chip->ecc.read_oob = hisi_nand_read_oob; + chip->ecc.write_page = hisi_nand_write_page_hwecc; + + switch (chip->ecc.strength) { + case 16: + ecc_bits = 6; + if (mtd->writesize == 2048) + chip->ecc.layout = &nand_ecc_2K_16bits; + + /* TODO: add more page size support */ + break; + + /* TODO: add more ecc strength support */ + default: + dev_err(dev, "not support strength: %d\n", chip->ecc.strength); + return -EINVAL; + } + + flag = hinfc_read(host, HINFC504_CON); + /* add ecc type configure */ + flag |= ((ecc_bits & HINFC504_CON_ECCTYPE_MASK) + << HINFC504_CON_ECCTYPE_SHIFT); + hinfc_write(host, flag, HINFC504_CON); + + /* enable ecc irq */ + flag = hinfc_read(host, HINFC504_INTEN) & 0xfff; + hinfc_write(host, flag | HINFC504_INTEN_UE | HINFC504_INTEN_CE, + HINFC504_INTEN); + + return 0; +} + +static int hisi_nfc_probe(struct platform_device *pdev) +{ + int ret = 0, irq, buswidth, flag, max_chips = HINFC504_MAX_CHIP; + struct device *dev = &pdev->dev; + struct hinfc_host *host; + struct nand_chip *chip; + struct mtd_info *mtd; + struct resource *res; + struct device_node *np = dev->of_node; + struct mtd_part_parser_data ppdata; + + host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); + if (!host) + return -ENOMEM; + host->dev = dev; + + platform_set_drvdata(pdev, host); + chip = &host->chip; + mtd = &host->mtd; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "no IRQ resource defined\n"); + ret = -ENXIO; + goto err_res; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + host->iobase = devm_ioremap_resource(dev, res); + if (IS_ERR(host->iobase)) { + ret = PTR_ERR(host->iobase); + goto err_res; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + host->mmio = devm_ioremap_resource(dev, res); + if (IS_ERR(host->mmio)) { + ret = PTR_ERR(host->mmio); + dev_err(dev, "devm_ioremap_resource[1] fail\n"); + goto err_res; + } + + mtd->priv = chip; + mtd->owner = THIS_MODULE; + mtd->name = "hisi_nand"; + mtd->dev.parent = &pdev->dev; + + chip->priv = host; + chip->cmdfunc = hisi_nfc_cmdfunc; + chip->select_chip = hisi_nfc_select_chip; + chip->read_byte = hisi_nfc_read_byte; + chip->read_word = hisi_nfc_read_word; + chip->write_buf = hisi_nfc_write_buf; + chip->read_buf = hisi_nfc_read_buf; + chip->chip_delay = HINFC504_CHIP_DELAY; + + chip->ecc.mode = of_get_nand_ecc_mode(np); + + buswidth = of_get_nand_bus_width(np); + if (buswidth == 16) + chip->options |= NAND_BUSWIDTH_16; + + hisi_nfc_host_init(host); + + ret = devm_request_irq(dev, irq, hinfc_irq_handle, IRQF_DISABLED, + "nandc", host); + if (ret) { + dev_err(dev, "failed to request IRQ\n"); + goto err_res; + } + + ret = nand_scan_ident(mtd, max_chips, NULL); + if (ret) { + ret = -ENODEV; + goto err_res; + } + + host->buffer = dmam_alloc_coherent(dev, mtd->writesize + mtd->oobsize, + &host->dma_buffer, GFP_KERNEL); + if (!host->buffer) { + ret = -ENOMEM; + goto err_res; + } + + host->dma_oob = host->dma_buffer + mtd->writesize; + memset(host->buffer, 0xff, mtd->writesize + mtd->oobsize); + + flag = hinfc_read(host, HINFC504_CON); + flag &= ~(HINFC504_CON_PAGESIZE_MASK << HINFC504_CON_PAGEISZE_SHIFT); + switch (mtd->writesize) { + case 2048: + flag |= (0x001 << HINFC504_CON_PAGEISZE_SHIFT); break; + /* + * TODO: add more pagesize support, + * default pagesize has been set in hisi_nfc_host_init + */ + default: + dev_err(dev, "NON-2KB page size nand flash\n"); + ret = -EINVAL; + goto err_res; + } + hinfc_write(host, flag, HINFC504_CON); + + if (chip->ecc.mode == NAND_ECC_HW) + hisi_nfc_ecc_probe(host); + + ret = nand_scan_tail(mtd); + if (ret) { + dev_err(dev, "nand_scan_tail failed: %d\n", ret); + goto err_res; + } + + ppdata.of_node = np; + ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0); + if (ret) { + dev_err(dev, "Err MTD partition=%d\n", ret); + goto err_mtd; + } + + return 0; + +err_mtd: + nand_release(mtd); +err_res: + return ret; +} + +static int hisi_nfc_remove(struct platform_device *pdev) +{ + struct hinfc_host *host = platform_get_drvdata(pdev); + struct mtd_info *mtd = &host->mtd; + + nand_release(mtd); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int hisi_nfc_suspend(struct device *dev) +{ + struct hinfc_host *host = dev_get_drvdata(dev); + unsigned long timeout = jiffies + HINFC504_NFC_PM_TIMEOUT; + + while (time_before(jiffies, timeout)) { + if (((hinfc_read(host, HINFC504_STATUS) & 0x1) == 0x0) && + (hinfc_read(host, HINFC504_DMA_CTRL) & + HINFC504_DMA_CTRL_DMA_START)) { + cond_resched(); + return 0; + } + } + + dev_err(host->dev, "nand controller suspend timeout.\n"); + + return -EAGAIN; +} + +static int hisi_nfc_resume(struct device *dev) +{ + int cs; + struct hinfc_host *host = dev_get_drvdata(dev); + struct nand_chip *chip = &host->chip; + + for (cs = 0; cs < chip->numchips; cs++) + hisi_nfc_send_cmd_reset(host, cs); + hinfc_write(host, SET_HINFC504_PWIDTH(HINFC504_W_LATCH, + HINFC504_R_LATCH, HINFC504_RW_LATCH), HINFC504_PWIDTH); + + return 0; +} +#endif +static SIMPLE_DEV_PM_OPS(hisi_nfc_pm_ops, hisi_nfc_suspend, hisi_nfc_resume); + +static const struct of_device_id nfc_id_table[] = { + { .compatible = "hisilicon,504-nfc" }, + {} +}; +MODULE_DEVICE_TABLE(of, nfc_id_table); + +static struct platform_driver hisi_nfc_driver = { + .driver = { + .name = "hisi_nand", + .of_match_table = nfc_id_table, + .pm = &hisi_nfc_pm_ops, + }, + .probe = hisi_nfc_probe, + .remove = hisi_nfc_remove, +}; + +module_platform_driver(hisi_nfc_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Zhou Wang"); +MODULE_AUTHOR("Zhiyong Cai"); +MODULE_DESCRIPTION("Hisilicon Nand Flash Controller Driver"); diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c index 1633ec9c5108..ebf2cce04cba 100644 --- a/drivers/mtd/nand/jz4740_nand.c +++ b/drivers/mtd/nand/jz4740_nand.c @@ -69,7 +69,7 @@ struct jz_nand { int selected_bank; - struct jz_nand_platform_data *pdata; + struct gpio_desc *busy_gpio; bool is_reading; }; @@ -131,7 +131,7 @@ static void jz_nand_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl) static int jz_nand_dev_ready(struct mtd_info *mtd) { struct jz_nand *nand = mtd_to_jz_nand(mtd); - return gpio_get_value_cansleep(nand->pdata->busy_gpio); + return gpiod_get_value_cansleep(nand->busy_gpio); } static void jz_nand_hwctl(struct mtd_info *mtd, int mode) @@ -423,14 +423,12 @@ static int jz_nand_probe(struct platform_device *pdev) if (ret) goto err_free; - if (pdata && gpio_is_valid(pdata->busy_gpio)) { - ret = gpio_request(pdata->busy_gpio, "NAND busy pin"); - if (ret) { - dev_err(&pdev->dev, - "Failed to request busy gpio %d: %d\n", - pdata->busy_gpio, ret); - goto err_iounmap_mmio; - } + nand->busy_gpio = devm_gpiod_get_optional(&pdev->dev, "busy", GPIOD_IN); + if (IS_ERR(nand->busy_gpio)) { + ret = PTR_ERR(nand->busy_gpio); + dev_err(&pdev->dev, "Failed to request busy gpio %d\n", + ret); + goto err_iounmap_mmio; } mtd = &nand->mtd; @@ -454,10 +452,9 @@ static int jz_nand_probe(struct platform_device *pdev) chip->cmd_ctrl = jz_nand_cmd_ctrl; chip->select_chip = jz_nand_select_chip; - if (pdata && gpio_is_valid(pdata->busy_gpio)) + if (nand->busy_gpio) chip->dev_ready = jz_nand_dev_ready; - nand->pdata = pdata; platform_set_drvdata(pdev, nand); /* We are going to autodetect NAND chips in the banks specified in the @@ -496,7 +493,7 @@ static int jz_nand_probe(struct platform_device *pdev) } if (chipnr == 0) { dev_err(&pdev->dev, "No NAND chips found\n"); - goto err_gpio_busy; + goto err_iounmap_mmio; } if (pdata && pdata->ident_callback) { @@ -533,9 +530,6 @@ err_unclaim_banks: nand->bank_base[bank - 1]); } writel(0, nand->base + JZ_REG_NAND_CTRL); -err_gpio_busy: - if (pdata && gpio_is_valid(pdata->busy_gpio)) - gpio_free(pdata->busy_gpio); err_iounmap_mmio: jz_nand_iounmap_resource(nand->mem, nand->base); err_free: @@ -546,7 +540,6 @@ err_free: static int jz_nand_remove(struct platform_device *pdev) { struct jz_nand *nand = platform_get_drvdata(pdev); - struct jz_nand_platform_data *pdata = dev_get_platdata(&pdev->dev); size_t i; nand_release(&nand->mtd); @@ -562,8 +555,6 @@ static int jz_nand_remove(struct platform_device *pdev) gpio_free(JZ_GPIO_MEM_CS0 + bank - 1); } } - if (pdata && gpio_is_valid(pdata->busy_gpio)) - gpio_free(pdata->busy_gpio); jz_nand_iounmap_resource(nand->mem, nand->base); diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 41585dfb206f..df7eb4ff07d1 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -157,7 +157,6 @@ static uint8_t nand_read_byte(struct mtd_info *mtd) /** * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip - * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip * @mtd: MTD device structure * * Default read function for 16bit buswidth with endianness conversion. @@ -1751,11 +1750,10 @@ static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, int page) { - uint8_t *buf = chip->oob_poi; int length = mtd->oobsize; int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad; int eccsize = chip->ecc.size; - uint8_t *bufpoi = buf; + uint8_t *bufpoi = chip->oob_poi; int i, toread, sndrnd = 0, pos; chip->cmdfunc(mtd, NAND_CMD_READ0, chip->ecc.size, page); @@ -2944,6 +2942,16 @@ static void nand_resume(struct mtd_info *mtd) __func__); } +/** + * nand_shutdown - [MTD Interface] Finish the current NAND operation and + * prevent further operations + * @mtd: MTD device structure + */ +static void nand_shutdown(struct mtd_info *mtd) +{ + nand_get_device(mtd, FL_SHUTDOWN); +} + /* Set default functions */ static void nand_set_defaults(struct nand_chip *chip, int busw) { @@ -4028,22 +4036,24 @@ int nand_scan_tail(struct mtd_info *mtd) ecc->read_oob = nand_read_oob_std; ecc->write_oob = nand_write_oob_std; /* - * Board driver should supply ecc.size and ecc.bytes values to - * select how many bits are correctable; see nand_bch_init() - * for details. Otherwise, default to 4 bits for large page - * devices. + * Board driver should supply ecc.size and ecc.strength values + * to select how many bits are correctable. Otherwise, default + * to 4 bits for large page devices. */ if (!ecc->size && (mtd->oobsize >= 64)) { ecc->size = 512; - ecc->bytes = DIV_ROUND_UP(13 * ecc->strength, 8); + ecc->strength = 4; } + + /* See nand_bch_init() for details. */ + ecc->bytes = DIV_ROUND_UP( + ecc->strength * fls(8 * ecc->size), 8); ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes, &ecc->layout); if (!ecc->priv) { pr_warn("BCH ECC initialization failed!\n"); BUG(); } - ecc->strength = ecc->bytes * 8 / fls(8 * ecc->size); break; case NAND_ECC_NONE: @@ -4146,6 +4156,7 @@ int nand_scan_tail(struct mtd_info *mtd) mtd->_unlock = NULL; mtd->_suspend = nand_suspend; mtd->_resume = nand_resume; + mtd->_reboot = nand_shutdown; mtd->_block_isreserved = nand_block_isreserved; mtd->_block_isbad = nand_block_isbad; mtd->_block_markbad = nand_block_markbad; @@ -4161,7 +4172,7 @@ int nand_scan_tail(struct mtd_info *mtd) * properly set. */ if (!mtd->bitflip_threshold) - mtd->bitflip_threshold = mtd->ecc_strength; + mtd->bitflip_threshold = DIV_ROUND_UP(mtd->ecc_strength * 3, 4); /* Check, if we should skip the bad block table scan */ if (chip->options & NAND_SKIP_BBTSCAN) diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index ab5bbf567439..f2324271b94e 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -245,7 +245,6 @@ MODULE_PARM_DESC(bch, "Enable BCH ecc and set how many bits should " #define STATE_DATAOUT 0x00001000 /* waiting for page data output */ #define STATE_DATAOUT_ID 0x00002000 /* waiting for ID bytes output */ #define STATE_DATAOUT_STATUS 0x00003000 /* waiting for status output */ -#define STATE_DATAOUT_STATUS_M 0x00004000 /* waiting for multi-plane status output */ #define STATE_DATAOUT_MASK 0x00007000 /* data output states mask */ /* Previous operation is done, ready to accept new requests */ @@ -269,7 +268,6 @@ MODULE_PARM_DESC(bch, "Enable BCH ecc and set how many bits should " #define OPT_ANY 0xFFFFFFFF /* any chip supports this operation */ #define OPT_PAGE512 0x00000002 /* 512-byte page chips */ #define OPT_PAGE2048 0x00000008 /* 2048-byte page chips */ -#define OPT_SMARTMEDIA 0x00000010 /* SmartMedia technology chips */ #define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */ #define OPT_PAGE4096 0x00000080 /* 4096-byte page chips */ #define OPT_LARGEPAGE (OPT_PAGE2048 | OPT_PAGE4096) /* 2048 & 4096-byte page chips */ @@ -1096,8 +1094,6 @@ static char *get_state_name(uint32_t state) return "STATE_DATAOUT_ID"; case STATE_DATAOUT_STATUS: return "STATE_DATAOUT_STATUS"; - case STATE_DATAOUT_STATUS_M: - return "STATE_DATAOUT_STATUS_M"; case STATE_READY: return "STATE_READY"; case STATE_UNKNOWN: @@ -1865,7 +1861,6 @@ static void switch_state(struct nandsim *ns) break; case STATE_DATAOUT_STATUS: - case STATE_DATAOUT_STATUS_M: ns->regs.count = ns->regs.num = 0; break; @@ -2005,7 +2000,6 @@ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte) } if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS - || NS_STATE(ns->state) == STATE_DATAOUT_STATUS_M || NS_STATE(ns->state) == STATE_DATAOUT) { int row = ns->regs.row; @@ -2343,6 +2337,7 @@ static int __init ns_init_module(void) } chip->ecc.mode = NAND_ECC_SOFT_BCH; chip->ecc.size = 512; + chip->ecc.strength = bch; chip->ecc.bytes = eccbytes; NS_INFO("using %u-bit/%u bytes BCH ECC\n", bch, chip->ecc.size); } diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 63f858e6bf39..60fa89939c24 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1048,10 +1048,9 @@ static int omap_dev_ready(struct mtd_info *mtd) * @mtd: MTD device structure * @mode: Read/Write mode * - * When using BCH, sector size is hardcoded to 512 bytes. - * Using wrapping mode 6 both for reading and writing if ELM module not uses - * for error correction. - * On writing, + * When using BCH with SW correction (i.e. no ELM), sector size is set + * to 512 bytes and we use BCH_WRAPMODE_6 wrapping mode + * for both reading and writing with: * eccsize0 = 0 (no additional protected byte in spare area) * eccsize1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area) */ @@ -1071,15 +1070,9 @@ static void __maybe_unused omap_enable_hwecc_bch(struct mtd_info *mtd, int mode) case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: bch_type = 0; nsectors = 1; - if (mode == NAND_ECC_READ) { - wr_mode = BCH_WRAPMODE_6; - ecc_size0 = BCH_ECC_SIZE0; - ecc_size1 = BCH_ECC_SIZE1; - } else { - wr_mode = BCH_WRAPMODE_6; - ecc_size0 = BCH_ECC_SIZE0; - ecc_size1 = BCH_ECC_SIZE1; - } + wr_mode = BCH_WRAPMODE_6; + ecc_size0 = BCH_ECC_SIZE0; + ecc_size1 = BCH_ECC_SIZE1; break; case OMAP_ECC_BCH4_CODE_HW: bch_type = 0; @@ -1097,15 +1090,9 @@ static void __maybe_unused omap_enable_hwecc_bch(struct mtd_info *mtd, int mode) case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: bch_type = 1; nsectors = 1; - if (mode == NAND_ECC_READ) { - wr_mode = BCH_WRAPMODE_6; - ecc_size0 = BCH_ECC_SIZE0; - ecc_size1 = BCH_ECC_SIZE1; - } else { - wr_mode = BCH_WRAPMODE_6; - ecc_size0 = BCH_ECC_SIZE0; - ecc_size1 = BCH_ECC_SIZE1; - } + wr_mode = BCH_WRAPMODE_6; + ecc_size0 = BCH_ECC_SIZE0; + ecc_size1 = BCH_ECC_SIZE1; break; case OMAP_ECC_BCH8_CODE_HW: bch_type = 1; diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c index ccaa8e283388..6f93b2990d25 100644 --- a/drivers/mtd/nand/sunxi_nand.c +++ b/drivers/mtd/nand/sunxi_nand.c @@ -1110,8 +1110,6 @@ static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc, switch (ecc->mode) { case NAND_ECC_SOFT_BCH: - ecc->bytes = DIV_ROUND_UP(ecc->strength * fls(8 * ecc->size), - 8); break; case NAND_ECC_HW: ret = sunxi_nand_hw_ecc_ctrl_init(mtd, ecc, np); diff --git a/drivers/mtd/nftlmount.c b/drivers/mtd/nftlmount.c index 51b9d6af307f..a5dfbfbebfca 100644 --- a/drivers/mtd/nftlmount.c +++ b/drivers/mtd/nftlmount.c @@ -89,9 +89,10 @@ static int find_boot_record(struct NFTLrecord *nftl) } /* To be safer with BIOS, also use erase mark as discriminant */ - if ((ret = nftl_read_oob(mtd, block * nftl->EraseSize + + ret = nftl_read_oob(mtd, block * nftl->EraseSize + SECTORSIZE + 8, 8, &retlen, - (char *)&h1) < 0)) { + (char *)&h1); + if (ret < 0) { printk(KERN_WARNING "ANAND header found at 0x%x in mtd%d, but OOB data read failed (err %d)\n", block * nftl->EraseSize, nftl->mbd.mtd->index, ret); continue; @@ -109,8 +110,9 @@ static int find_boot_record(struct NFTLrecord *nftl) } /* Finally reread to check ECC */ - if ((ret = mtd->read(mtd, block * nftl->EraseSize, SECTORSIZE, - &retlen, buf) < 0)) { + ret = mtd->read(mtd, block * nftl->EraseSize, SECTORSIZE, + &retlen, buf); + if (ret < 0) { printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but ECC read failed (err %d)\n", block * nftl->EraseSize, nftl->mbd.mtd->index, ret); continue; @@ -228,9 +230,11 @@ device is already correct. The new DiskOnChip driver already scanned the bad block table. Just query it. if ((i & (SECTORSIZE - 1)) == 0) { /* read one sector for every SECTORSIZE of blocks */ - if ((ret = mtd->read(nftl->mbd.mtd, block * nftl->EraseSize + - i + SECTORSIZE, SECTORSIZE, &retlen, - buf)) < 0) { + ret = mtd->read(nftl->mbd.mtd, + block * nftl->EraseSize + i + + SECTORSIZE, SECTORSIZE, + &retlen, buf); + if (ret < 0) { printk(KERN_NOTICE "Read of bad sector table failed (err %d)\n", ret); kfree(nftl->ReplUnitTable); diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c index 39763b94f67d..1c7308c2c77d 100644 --- a/drivers/mtd/spi-nor/fsl-quadspi.c +++ b/drivers/mtd/spi-nor/fsl-quadspi.c @@ -57,7 +57,9 @@ #define QUADSPI_BUF3CR 0x1c #define QUADSPI_BUF3CR_ALLMST_SHIFT 31 -#define QUADSPI_BUF3CR_ALLMST (1 << QUADSPI_BUF3CR_ALLMST_SHIFT) +#define QUADSPI_BUF3CR_ALLMST_MASK (1 << QUADSPI_BUF3CR_ALLMST_SHIFT) +#define QUADSPI_BUF3CR_ADATSZ_SHIFT 8 +#define QUADSPI_BUF3CR_ADATSZ_MASK (0xFF << QUADSPI_BUF3CR_ADATSZ_SHIFT) #define QUADSPI_BFGENCR 0x20 #define QUADSPI_BFGENCR_PAR_EN_SHIFT 16 @@ -198,18 +200,21 @@ struct fsl_qspi_devtype_data { enum fsl_qspi_devtype devtype; int rxfifo; int txfifo; + int ahb_buf_size; }; static struct fsl_qspi_devtype_data vybrid_data = { .devtype = FSL_QUADSPI_VYBRID, .rxfifo = 128, - .txfifo = 64 + .txfifo = 64, + .ahb_buf_size = 1024 }; static struct fsl_qspi_devtype_data imx6sx_data = { .devtype = FSL_QUADSPI_IMX6SX, .rxfifo = 128, - .txfifo = 512 + .txfifo = 512, + .ahb_buf_size = 1024 }; #define FSL_QSPI_MAX_CHIP 4 @@ -227,6 +232,7 @@ struct fsl_qspi { u32 nor_num; u32 clk_rate; unsigned int chip_base_addr; /* We may support two chips. */ + bool has_second_chip; }; static inline int is_vybrid_qspi(struct fsl_qspi *q) @@ -583,7 +589,12 @@ static void fsl_qspi_init_abh_read(struct fsl_qspi *q) writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF0CR); writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF1CR); writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF2CR); - writel(QUADSPI_BUF3CR_ALLMST, base + QUADSPI_BUF3CR); + /* + * Set ADATSZ with the maximum AHB buffer size to improve the + * read performance. + */ + writel(QUADSPI_BUF3CR_ALLMST_MASK | ((q->devtype_data->ahb_buf_size / 8) + << QUADSPI_BUF3CR_ADATSZ_SHIFT), base + QUADSPI_BUF3CR); /* We only use the buffer3 */ writel(0, base + QUADSPI_BUF0IND); @@ -783,7 +794,6 @@ static int fsl_qspi_probe(struct platform_device *pdev) struct spi_nor *nor; struct mtd_info *mtd; int ret, i = 0; - bool has_second_chip = false; const struct of_device_id *of_id = of_match_device(fsl_qspi_dt_ids, &pdev->dev); @@ -798,37 +808,30 @@ static int fsl_qspi_probe(struct platform_device *pdev) /* find the resources */ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "QuadSPI"); q->iobase = devm_ioremap_resource(dev, res); - if (IS_ERR(q->iobase)) { - ret = PTR_ERR(q->iobase); - goto map_failed; - } + if (IS_ERR(q->iobase)) + return PTR_ERR(q->iobase); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "QuadSPI-memory"); q->ahb_base = devm_ioremap_resource(dev, res); - if (IS_ERR(q->ahb_base)) { - ret = PTR_ERR(q->ahb_base); - goto map_failed; - } + if (IS_ERR(q->ahb_base)) + return PTR_ERR(q->ahb_base); + q->memmap_phy = res->start; /* find the clocks */ q->clk_en = devm_clk_get(dev, "qspi_en"); - if (IS_ERR(q->clk_en)) { - ret = PTR_ERR(q->clk_en); - goto map_failed; - } + if (IS_ERR(q->clk_en)) + return PTR_ERR(q->clk_en); q->clk = devm_clk_get(dev, "qspi"); - if (IS_ERR(q->clk)) { - ret = PTR_ERR(q->clk); - goto map_failed; - } + if (IS_ERR(q->clk)) + return PTR_ERR(q->clk); ret = clk_prepare_enable(q->clk_en); if (ret) { dev_err(dev, "can not enable the qspi_en clock\n"); - goto map_failed; + return ret; } ret = clk_prepare_enable(q->clk); @@ -860,14 +863,14 @@ static int fsl_qspi_probe(struct platform_device *pdev) goto irq_failed; if (of_get_property(np, "fsl,qspi-has-second-chip", NULL)) - has_second_chip = true; + q->has_second_chip = true; /* iterate the subnodes. */ for_each_available_child_of_node(dev->of_node, np) { char modalias[40]; /* skip the holes */ - if (!has_second_chip) + if (!q->has_second_chip) i *= 2; nor = &q->nor[i]; @@ -890,24 +893,24 @@ static int fsl_qspi_probe(struct platform_device *pdev) ret = of_modalias_node(np, modalias, sizeof(modalias)); if (ret < 0) - goto map_failed; + goto irq_failed; ret = of_property_read_u32(np, "spi-max-frequency", &q->clk_rate); if (ret < 0) - goto map_failed; + goto irq_failed; /* set the chip address for READID */ fsl_qspi_set_base_addr(q, nor); ret = spi_nor_scan(nor, modalias, SPI_NOR_QUAD); if (ret) - goto map_failed; + goto irq_failed; ppdata.of_node = np; ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0); if (ret) - goto map_failed; + goto irq_failed; /* Set the correct NOR size now. */ if (q->nor_size == 0) { @@ -939,19 +942,19 @@ static int fsl_qspi_probe(struct platform_device *pdev) clk_disable(q->clk); clk_disable(q->clk_en); - dev_info(dev, "QuadSPI SPI NOR flash driver\n"); return 0; last_init_failed: - for (i = 0; i < q->nor_num; i++) + for (i = 0; i < q->nor_num; i++) { + /* skip the holes */ + if (!q->has_second_chip) + i *= 2; mtd_device_unregister(&q->mtd[i]); - + } irq_failed: clk_disable_unprepare(q->clk); clk_failed: clk_disable_unprepare(q->clk_en); -map_failed: - dev_err(dev, "Freescale QuadSPI probe failed\n"); return ret; } @@ -960,8 +963,12 @@ static int fsl_qspi_remove(struct platform_device *pdev) struct fsl_qspi *q = platform_get_drvdata(pdev); int i; - for (i = 0; i < q->nor_num; i++) + for (i = 0; i < q->nor_num; i++) { + /* skip the holes */ + if (!q->has_second_chip) + i *= 2; mtd_device_unregister(&q->mtd[i]); + } /* disable the hardware */ writel(QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR); @@ -972,6 +979,22 @@ static int fsl_qspi_remove(struct platform_device *pdev) return 0; } +static int fsl_qspi_suspend(struct platform_device *pdev, pm_message_t state) +{ + return 0; +} + +static int fsl_qspi_resume(struct platform_device *pdev) +{ + struct fsl_qspi *q = platform_get_drvdata(pdev); + + fsl_qspi_nor_setup(q); + fsl_qspi_set_map_addr(q); + fsl_qspi_nor_setup_last(q); + + return 0; +} + static struct platform_driver fsl_qspi_driver = { .driver = { .name = "fsl-quadspi", @@ -980,6 +1003,8 @@ static struct platform_driver fsl_qspi_driver = { }, .probe = fsl_qspi_probe, .remove = fsl_qspi_remove, + .suspend = fsl_qspi_suspend, + .resume = fsl_qspi_resume, }; module_platform_driver(fsl_qspi_driver); diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 0f8ec3c2d015..b6a5a0c269e1 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -538,6 +538,7 @@ static const struct spi_device_id spi_nor_ids[] = { /* GigaDevice */ { "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) }, { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) }, + { "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256, SECT_4K) }, /* Intel/Numonyx -- xxxs33b */ { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) }, @@ -560,14 +561,14 @@ static const struct spi_device_id spi_nor_ids[] = { { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) }, /* Micron */ - { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) }, - { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) }, - { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, 0) }, - { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) }, - { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) }, - { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) }, - { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, USE_FSR) }, - { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, USE_FSR) }, + { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) }, + { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, SPI_NOR_QUAD_READ) }, + { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) }, + { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) }, + { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) }, + { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, + { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, + { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, /* PMC */ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, @@ -891,6 +892,45 @@ static int spansion_quad_enable(struct spi_nor *nor) return 0; } +static int micron_quad_enable(struct spi_nor *nor) +{ + int ret; + u8 val; + + ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1); + if (ret < 0) { + dev_err(nor->dev, "error %d reading EVCR\n", ret); + return ret; + } + + write_enable(nor); + + /* set EVCR, enable quad I/O */ + nor->cmd_buf[0] = val & ~EVCR_QUAD_EN_MICRON; + ret = nor->write_reg(nor, SPINOR_OP_WD_EVCR, nor->cmd_buf, 1, 0); + if (ret < 0) { + dev_err(nor->dev, "error while writing EVCR register\n"); + return ret; + } + + ret = spi_nor_wait_till_ready(nor); + if (ret) + return ret; + + /* read EVCR and check it */ + ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1); + if (ret < 0) { + dev_err(nor->dev, "error %d reading EVCR\n", ret); + return ret; + } + if (val & EVCR_QUAD_EN_MICRON) { + dev_err(nor->dev, "Micron EVCR Quad bit not clear\n"); + return -EINVAL; + } + + return 0; +} + static int set_quad_mode(struct spi_nor *nor, struct flash_info *info) { int status; @@ -903,6 +943,13 @@ static int set_quad_mode(struct spi_nor *nor, struct flash_info *info) return -EINVAL; } return status; + case CFI_MFR_ST: + status = micron_quad_enable(nor); + if (status) { + dev_err(nor->dev, "Micron quad-read not enabled\n"); + return -EINVAL; + } + return status; default: status = spansion_quad_enable(nor); if (status) { |