summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/tests
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-03-24 19:57:15 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2016-03-24 19:57:15 -0700
commit8f40842e4260f73792c156aded004197a19135ee (patch)
treeb192ed354a34839a8c1607883d1ebc09b06a76c0 /drivers/mtd/tests
parent88875667ebbcb95da3f93a4cf657d5dad7db9673 (diff)
parent6871c1b96de88d3576d935b528fd1b0ec70e81f5 (diff)
downloadlinux-8f40842e4260f73792c156aded004197a19135ee.tar.bz2
Merge tag 'for-linus-20160324' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris: "NAND: - Add sunxi_nand randomizer support - begin refactoring NAND ecclayout structs - fix pxa3xx_nand dmaengine usage - brcmnand: fix support for v7.1 controller - add Qualcomm NAND controller driver SPI NOR: - add new ls1021a, ls2080a support to Freescale QuadSPI - add new flash ID entries - support bottom-block protection for Winbond flash - support Status Register Write Protect - remove broken QPI support for Micron SPI flash JFFS2: - improve post-mount CRC scan efficiency General: - refactor bcm63xxpart parser, to later extend for NAND - add writebuf size parameter to mtdram Other minor code quality improvements" * tag 'for-linus-20160324' of git://git.infradead.org/linux-mtd: (72 commits) mtd: nand: remove kerneldoc for removed function parameter mtd: nand: Qualcomm NAND controller driver dt/bindings: qcom_nandc: Add DT bindings mtd: nand: don't select chip in nand_chip's block_bad op mtd: spi-nor: support lock/unlock for a few Winbond chips mtd: spi-nor: add TB (Top/Bottom) protect support mtd: spi-nor: add SPI_NOR_HAS_LOCK flag mtd: spi-nor: use BIT() for flash_info flags mtd: spi-nor: disallow further writes to SR if WP# is low mtd: spi-nor: make lock/unlock bounds checks more obvious and robust mtd: spi-nor: silently drop lock/unlock for already locked/unlocked region mtd: spi-nor: wait for SR_WIP to clear on initial unlock mtd: nand: simplify nand_bch_init() usage mtd: mtdswap: remove useless if (!mtd->ecclayout) test mtd: create an mtd_oobavail() helper and make use of it mtd: kill the ecclayout->oobavail field mtd: nand: check status before reporting timeout mtd: bcm63xxpart: give width specifier an 'int', not 'size_t' mtd: mtdram: Add parameter for setting writebuf size mtd: nand: pxa3xx_nand: kill unused field 'drcmr_cmd' ...
Diffstat (limited to 'drivers/mtd/tests')
-rw-r--r--drivers/mtd/tests/oobtest.c49
1 files changed, 24 insertions, 25 deletions
diff --git a/drivers/mtd/tests/oobtest.c b/drivers/mtd/tests/oobtest.c
index 31762120eb56..1cb3f7758fb6 100644
--- a/drivers/mtd/tests/oobtest.c
+++ b/drivers/mtd/tests/oobtest.c
@@ -215,19 +215,19 @@ static int verify_eraseblock(int ebnum)
pr_info("ignoring error as within bitflip_limit\n");
}
- if (use_offset != 0 || use_len < mtd->ecclayout->oobavail) {
+ if (use_offset != 0 || use_len < mtd->oobavail) {
int k;
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
- ops.ooblen = mtd->ecclayout->oobavail;
+ ops.ooblen = mtd->oobavail;
ops.oobretlen = 0;
ops.ooboffs = 0;
ops.datbuf = NULL;
ops.oobbuf = readbuf;
err = mtd_read_oob(mtd, addr, &ops);
- if (err || ops.oobretlen != mtd->ecclayout->oobavail) {
+ if (err || ops.oobretlen != mtd->oobavail) {
pr_err("error: readoob failed at %#llx\n",
(long long)addr);
errcnt += 1;
@@ -244,7 +244,7 @@ static int verify_eraseblock(int ebnum)
/* verify post-(use_offset + use_len) area for 0xff */
k = use_offset + use_len;
bitflips += memffshow(addr, k, readbuf + k,
- mtd->ecclayout->oobavail - k);
+ mtd->oobavail - k);
if (bitflips > bitflip_limit) {
pr_err("error: verify failed at %#llx\n",
@@ -269,8 +269,8 @@ static int verify_eraseblock_in_one_go(int ebnum)
struct mtd_oob_ops ops;
int err = 0;
loff_t addr = (loff_t)ebnum * mtd->erasesize;
- size_t len = mtd->ecclayout->oobavail * pgcnt;
- size_t oobavail = mtd->ecclayout->oobavail;
+ size_t len = mtd->oobavail * pgcnt;
+ size_t oobavail = mtd->oobavail;
size_t bitflips;
int i;
@@ -394,8 +394,8 @@ static int __init mtd_oobtest_init(void)
goto out;
use_offset = 0;
- use_len = mtd->ecclayout->oobavail;
- use_len_max = mtd->ecclayout->oobavail;
+ use_len = mtd->oobavail;
+ use_len_max = mtd->oobavail;
vary_offset = 0;
/* First test: write all OOB, read it back and verify */
@@ -460,8 +460,8 @@ static int __init mtd_oobtest_init(void)
/* Write all eraseblocks */
use_offset = 0;
- use_len = mtd->ecclayout->oobavail;
- use_len_max = mtd->ecclayout->oobavail;
+ use_len = mtd->oobavail;
+ use_len_max = mtd->oobavail;
vary_offset = 1;
prandom_seed_state(&rnd_state, 5);
@@ -471,8 +471,8 @@ static int __init mtd_oobtest_init(void)
/* Check all eraseblocks */
use_offset = 0;
- use_len = mtd->ecclayout->oobavail;
- use_len_max = mtd->ecclayout->oobavail;
+ use_len = mtd->oobavail;
+ use_len_max = mtd->oobavail;
vary_offset = 1;
prandom_seed_state(&rnd_state, 5);
err = verify_all_eraseblocks();
@@ -480,8 +480,8 @@ static int __init mtd_oobtest_init(void)
goto out;
use_offset = 0;
- use_len = mtd->ecclayout->oobavail;
- use_len_max = mtd->ecclayout->oobavail;
+ use_len = mtd->oobavail;
+ use_len_max = mtd->oobavail;
vary_offset = 0;
/* Fourth test: try to write off end of device */
@@ -501,7 +501,7 @@ static int __init mtd_oobtest_init(void)
ops.retlen = 0;
ops.ooblen = 1;
ops.oobretlen = 0;
- ops.ooboffs = mtd->ecclayout->oobavail;
+ ops.ooboffs = mtd->oobavail;
ops.datbuf = NULL;
ops.oobbuf = writebuf;
pr_info("attempting to start write past end of OOB\n");
@@ -521,7 +521,7 @@ static int __init mtd_oobtest_init(void)
ops.retlen = 0;
ops.ooblen = 1;
ops.oobretlen = 0;
- ops.ooboffs = mtd->ecclayout->oobavail;
+ ops.ooboffs = mtd->oobavail;
ops.datbuf = NULL;
ops.oobbuf = readbuf;
pr_info("attempting to start read past end of OOB\n");
@@ -543,7 +543,7 @@ static int __init mtd_oobtest_init(void)
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
- ops.ooblen = mtd->ecclayout->oobavail + 1;
+ ops.ooblen = mtd->oobavail + 1;
ops.oobretlen = 0;
ops.ooboffs = 0;
ops.datbuf = NULL;
@@ -563,7 +563,7 @@ static int __init mtd_oobtest_init(void)
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
- ops.ooblen = mtd->ecclayout->oobavail + 1;
+ ops.ooblen = mtd->oobavail + 1;
ops.oobretlen = 0;
ops.ooboffs = 0;
ops.datbuf = NULL;
@@ -587,7 +587,7 @@ static int __init mtd_oobtest_init(void)
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
- ops.ooblen = mtd->ecclayout->oobavail;
+ ops.ooblen = mtd->oobavail;
ops.oobretlen = 0;
ops.ooboffs = 1;
ops.datbuf = NULL;
@@ -607,7 +607,7 @@ static int __init mtd_oobtest_init(void)
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
- ops.ooblen = mtd->ecclayout->oobavail;
+ ops.ooblen = mtd->oobavail;
ops.oobretlen = 0;
ops.ooboffs = 1;
ops.datbuf = NULL;
@@ -638,7 +638,7 @@ static int __init mtd_oobtest_init(void)
for (i = 0; i < ebcnt - 1; ++i) {
int cnt = 2;
int pg;
- size_t sz = mtd->ecclayout->oobavail;
+ size_t sz = mtd->oobavail;
if (bbt[i] || bbt[i + 1])
continue;
addr = (loff_t)(i + 1) * mtd->erasesize - mtd->writesize;
@@ -673,13 +673,12 @@ static int __init mtd_oobtest_init(void)
for (i = 0; i < ebcnt - 1; ++i) {
if (bbt[i] || bbt[i + 1])
continue;
- prandom_bytes_state(&rnd_state, writebuf,
- mtd->ecclayout->oobavail * 2);
+ prandom_bytes_state(&rnd_state, writebuf, mtd->oobavail * 2);
addr = (loff_t)(i + 1) * mtd->erasesize - mtd->writesize;
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
- ops.ooblen = mtd->ecclayout->oobavail * 2;
+ ops.ooblen = mtd->oobavail * 2;
ops.oobretlen = 0;
ops.ooboffs = 0;
ops.datbuf = NULL;
@@ -688,7 +687,7 @@ static int __init mtd_oobtest_init(void)
if (err)
goto out;
if (memcmpshow(addr, readbuf, writebuf,
- mtd->ecclayout->oobavail * 2)) {
+ mtd->oobavail * 2)) {
pr_err("error: verify failed at %#llx\n",
(long long)addr);
errcnt += 1;