diff options
| author | Miquel Raynal <miquel.raynal@bootlin.com> | 2020-08-27 10:51:58 +0200 |
|---|---|---|
| committer | Miquel Raynal <miquel.raynal@bootlin.com> | 2020-09-28 15:59:42 +0200 |
| commit | bace41f80f65dc4ba13c892bac783e7e81847379 (patch) | |
| tree | 16b44ea42a23ec7ce4b826e54b7626576e98dfb0 /drivers/mtd/nand/raw/brcmnand/brcmnand.c | |
| parent | ef24f97daac4d9450c956ab165d8337c2feca0e9 (diff) | |
| download | linux-bace41f80f65dc4ba13c892bac783e7e81847379.tar.bz2 | |
mtd: rawnand: Use the new ECC engine type enumeration
Mechanical switch from the legacy "mode" enumeration to the new
"engine type" enumeration in drivers and board files.
The device tree parsing is also updated to return the new enumeration
from the old strings.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-11-miquel.raynal@bootlin.com
Diffstat (limited to 'drivers/mtd/nand/raw/brcmnand/brcmnand.c')
| -rw-r--r-- | drivers/mtd/nand/raw/brcmnand/brcmnand.c | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c index 39f1bf327592..afe27a27cb93 100644 --- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c +++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c @@ -2565,9 +2565,9 @@ static int brcmnand_setup_dev(struct brcmnand_host *host) cfg->col_adr_bytes = 2; cfg->blk_adr_bytes = get_blk_adr_bytes(mtd->size, mtd->writesize); - if (chip->ecc.mode != NAND_ECC_HW) { + if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) { dev_err(ctrl->dev, "only HW ECC supported; selected: %d\n", - chip->ecc.mode); + chip->ecc.engine_type); return -EINVAL; } @@ -2587,7 +2587,7 @@ static int brcmnand_setup_dev(struct brcmnand_host *host) return -EINVAL; } - if (chip->ecc.mode != NAND_ECC_NONE && + if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_NONE && (!chip->ecc.size || !chip->ecc.strength)) { if (chip->base.eccreq.step_size && chip->base.eccreq.strength) { /* use detected ECC parameters */ @@ -2728,7 +2728,7 @@ static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn) chip->legacy.read_buf = brcmnand_read_buf; chip->legacy.write_buf = brcmnand_write_buf; - chip->ecc.mode = NAND_ECC_HW; + chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST; chip->ecc.read_page = brcmnand_read_page; chip->ecc.write_page = brcmnand_write_page; chip->ecc.read_page_raw = brcmnand_read_page_raw; |