summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-12-19 12:47:41 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-12-19 12:47:41 -0800
commitca2a88f56aa385890c7fd4ce9d2722b0848ca990 (patch)
tree935fd9cec938677d6529db203f24d803ed5f0b19 /drivers/mtd/nand/Kconfig
parent3935e89505a1c3ab3f3b0c7ef0eae54124f48905 (diff)
parentd4d4f1bf6a343b25220fdcdf559fd593dd3e25a7 (diff)
downloadlinux-ca2a88f56aa385890c7fd4ce9d2722b0848ca990.tar.bz2
Merge tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd
Pull MTD updates from David Woodhouse: - Various cleanups especially in NAND tests - Add support for NAND flash on BCMA bus - DT support for sh_flctl and denali NAND drivers - Kill obsolete/superceded drivers (fortunet, nomadik_nand) - Fix JFFS2 locking bug in ENOMEM failure path - New SPI flash chips, as usual - Support writing in 'reliable mode' for DiskOnChip G4 - Debugfs support in nandsim * tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd: (96 commits) mtd: nand: typo in nand_id_has_period() comments mtd: nand/gpio: use io{read,write}*_rep accessors mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited. mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems mtd: nand/docg4: fix and improve read of factory bbt mtd: nand/docg4: reserve bb marker area in ecclayout mtd: nand/docg4: add support for writing in reliable mode mtd: mxc_nand: reorder part_probes to let cmdline override other sources mtd: mxc_nand: fix unbalanced clk_disable() in error path mtd: nandsim: Introduce debugfs infrastructure mtd: physmap_of: error checking to prevent a NULL pointer dereference mtg: docg3: potential divide by zero in doc_write_oob() mtd: bcm47xxnflash: writing support mtd: tests/read: initialize buffer for whole next page mtd: at91: atmel_nand: return bit flips for the PMECC read_page() mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c mtd: nand: onfi need to be probed in 8 bits mode mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width mtd: nand: print flash size during detection mted: nand_wait_ready timeout fix ...
Diffstat (limited to 'drivers/mtd/nand/Kconfig')
-rw-r--r--drivers/mtd/nand/Kconfig34
1 files changed, 25 insertions, 9 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index dae191b3c081..5819eb575210 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -50,16 +50,30 @@ config MTD_NAND_MUSEUM_IDS
of these chips were reused by later, larger chips.
config MTD_NAND_DENALI
- depends on PCI
+ tristate "Support Denali NAND controller"
+ help
+ Enable support for the Denali NAND controller. This should be
+ combined with either the PCI or platform drivers to provide device
+ registration.
+
+config MTD_NAND_DENALI_PCI
tristate "Support Denali NAND controller on Intel Moorestown"
+ depends on PCI && MTD_NAND_DENALI
help
Enable the driver for NAND flash on Intel Moorestown, using the
Denali NAND controller core.
-
+
+config MTD_NAND_DENALI_DT
+ tristate "Support Denali NAND controller as a DT device"
+ depends on HAVE_CLK && MTD_NAND_DENALI
+ help
+ Enable the driver for NAND flash on platforms using a Denali NAND
+ controller as a DT device.
+
config MTD_NAND_DENALI_SCRATCH_REG_ADDR
hex "Denali NAND size scratch register address"
default "0xFF108018"
- depends on MTD_NAND_DENALI
+ depends on MTD_NAND_DENALI_PCI
help
Some platforms place the NAND chip size in a scratch register
because (some versions of) the driver aren't able to automatically
@@ -433,6 +447,14 @@ config MTD_NAND_GPMI_NAND
block, such as SD card. So pay attention to it when you enable
the GPMI.
+config MTD_NAND_BCM47XXNFLASH
+ tristate "Support for NAND flash on BCM4706 BCMA bus"
+ depends on BCMA_NFLASH
+ help
+ BCMA bus can have various flash memories attached, they are
+ registered by bcma as platform devices. This enables driver for
+ NAND flash memories. For now only BCM4706 is supported.
+
config MTD_NAND_PLATFORM
tristate "Support for generic platform NAND driver"
depends on HAS_IOMEM
@@ -499,12 +521,6 @@ config MTD_NAND_MXC
This enables the driver for the NAND flash controller on the
MXC processors.
-config MTD_NAND_NOMADIK
- tristate "ST Nomadik 8815 NAND support"
- depends on ARCH_NOMADIK
- help
- Driver for the NAND flash controller on the Nomadik, with ECC.
-
config MTD_NAND_SH_FLCTL
tristate "Support for NAND on Renesas SuperH FLCTL"
depends on SUPERH || ARCH_SHMOBILE