summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
diff options
context:
space:
mode:
authorUlf Hansson <ulf.hansson@linaro.org>2017-06-08 15:23:08 +0200
committerUlf Hansson <ulf.hansson@linaro.org>2017-06-20 10:30:48 +0200
commitd2a47176a877b1eccd3086a4c8d790d644d594cb (patch)
tree5d80b5da3796d378c25d9aae4376a156857d0ccf /drivers/mmc
parent9820a5b1110126142c50a779622abab560d3fcc1 (diff)
downloadlinux-d2a47176a877b1eccd3086a4c8d790d644d594cb.tar.bz2
mmc: core: Remove MMC_CAP2_HC_ERASE_SZ
The MMC_CAP2_HC_ERASE_SZ is used only by a few mmc host drivers. Its intent is to enable eMMC's high-capacity erase size, as to improve the behaviour of the erase operations. We should strive to avoid software configuration options that aren't necessary, but instead deploy common behaviours. For these reasons, let's remove the capability bit for MMC_CAP2_HC_ERASE_SZ and make it the default behaviour. Note that this change doesn't affect eMMCs supporting trim/discard, because these commands operates on sectors and takes precedence over erase commands. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/core/mmc.c8
-rw-r--r--drivers/mmc/host/sdhci-acpi.c1
-rw-r--r--drivers/mmc/host/sdhci-brcmstb.c3
-rw-r--r--drivers/mmc/host/sdhci-pci-core.c4
4 files changed, 3 insertions, 13 deletions
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index e504b66bd41c..4ffea14b7eb6 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1651,12 +1651,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
mmc_set_erase_size(card);
}
- /*
- * If enhanced_area_en is TRUE, host needs to enable ERASE_GRP_DEF
- * bit. This bit will be lost every time after a reset or power off.
- */
- if (card->ext_csd.partition_setting_completed ||
- (card->ext_csd.rev >= 3 && (host->caps2 & MMC_CAP2_HC_ERASE_SZ))) {
+ /* Enable ERASE_GRP_DEF. This bit is lost after a reset or power off. */
+ if (card->ext_csd.rev >= 3) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_ERASE_GROUP_DEF, 1,
card->ext_csd.generic_cmd6_time);
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index 89d9a8c014f5..cf66a3db71b8 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -274,7 +274,6 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = {
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR |
MMC_CAP_CMD_DURING_TFR | MMC_CAP_WAIT_WHILE_BUSY,
- .caps2 = MMC_CAP2_HC_ERASE_SZ,
.flags = SDHCI_ACPI_RUNTIME_PM,
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c
index 242c5dc7a81e..e2f638338e8f 100644
--- a/drivers/mmc/host/sdhci-brcmstb.c
+++ b/drivers/mmc/host/sdhci-brcmstb.c
@@ -89,9 +89,6 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev)
goto err_clk;
}
- /* Enable MMC_CAP2_HC_ERASE_SZ for better max discard calculations */
- host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ;
-
sdhci_get_of_property(pdev);
mmc_of_parse(host->mmc);
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 8fa84a013be4..227a5cb4b3bf 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -347,8 +347,7 @@ static inline void sdhci_pci_remove_own_cd(struct sdhci_pci_slot *slot)
static int mfd_emmc_probe_slot(struct sdhci_pci_slot *slot)
{
slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE;
- slot->host->mmc->caps2 |= MMC_CAP2_BOOTPART_NOACC |
- MMC_CAP2_HC_ERASE_SZ;
+ slot->host->mmc->caps2 |= MMC_CAP2_BOOTPART_NOACC;
return 0;
}
@@ -587,7 +586,6 @@ static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR |
MMC_CAP_CMD_DURING_TFR |
MMC_CAP_WAIT_WHILE_BUSY;
- slot->host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ;
slot->hw_reset = sdhci_pci_int_hw_reset;
if (slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_BSW_EMMC)
slot->host->timeout_clk = 1000; /* 1000 kHz i.e. 1 MHz */